Tissue Culture and Laboratory Technology

Tissue Culture and
Laboratory Technology
Sales Brochure 2018
S wi ss Desi gn
TPP Techno Plastic Products AG
TPP is known as manufacturer for disposable plastic products for
tissue culture of highest quality. And that is what we are proud of!
Dear TPP customers
We say thank you!
Not only the product must be of best quality, but also our services to support you in
your daily work. For both, product and service, a worldwide net of local TPP dealers are
committed, to fulfill your demands and requests to the full extent.
100 % customer satisfaction is the TPP target.
Again, thank you for your trust and confidence in TPP for 50 years and hopefully more.
TPP Techno Plastic Products AG
FANSHOP
TPP - Swiss quality since 1966
www.tpp.ch
Visit our online store: tpp-shop.com
Contents
2-3
TPP Techno Plastic Products AG
4-5
Tissue Culture Flask 25 - 300 cm2
6
Tissue Culture Flask with Re-Closable Lid 115 - 150 cm2
7
Tissue Culture Flask 25 - 300 cm2 with Peel-Off Foil
8
Clipmax 10 cm2
9
«VENT» or Filter Screw Cap
10-11
Tissue Culture Flat Tube 10 cm2 and Tissue Culture Tube 20 cm2
12-13
Cell Scraper and Cell Spatula
14-15
TubeSpin® Bioreactor 15 - 600 ml
15
Rack and Consumables for TubeSpin® Bioreactor
16
TubeSpin® Bioreactor 50 with Septum
17
Shaker Plate for TubeSpin® Bioreactor 450 - 600
18
PCV Packed Cell Volume Tube
19
"easy read" Measuring Device
20
Serological Pipette Standard 1 - 25 ml
21
Serological Pipette with Reservoir 25 - 70 ml
22
Turbo-Fix Pipette Aid
23
Turbo-Fix Consumables
24-25
Tissue Culture Test Plate 6 - 96 wells
25
Tissue Culture Test Plate 6 - 96 wells, small packaging unit
26-27
Tissue Culture Dish 40 - 150 cm2
28
Vacuum Filtration "rapid"-Filtermax 150 - 1'000 ml
29
Syringe Filter 0.22 µm and 0.45 µm
30-31
Centrifuge Tube 13 - 50 ml
31
Rack filled with Centrifuge Tubes 15 ml or 50 ml
31
Centrifuge Tube 15 ml / 50 ml, small unit packaging
32-33
Cryo Tube 1.2 - 5 ml
33
Insert for Cryo Tubes
34-35
Rack and Box
36-37
3-B Product "Clean Room"
38
Quality Assurance
39
Quality Standards
40
Raw Materials
41
Transportation and Storage
42-47
Quick review
4
Tissue Culture Flask 25 - 300 cm2
Features of the Tissue Culture Flask:
• Surface activated growth area for optimal adhesion and best proliferation of adherent cells
• Geometry of the neck reduces risk of media slop over
• Staple rim offers stable, slip free stapling of several flasks
• Highly visible bilateral marking areas
• White volume graduations on both sides for optic control of the filling volume
• Crystal clear transparency
The opto-mechanically activated growth area offers optimal cell adhesion and resulting in best proliferation.
Flasks are available with «VENT»- or filter-screw caps. The filter screw caps offer constant sterile gas exchange
through the hydrophobic non-wetting PTFE membrane with pore size 0.22 µm
5
«VENT»-position at 12 o'clock = gas exchange
«VENT»-position at 3 o'clock = gas tight
•Click:
•Turn 90° degree clockwise over the click:
«VENT»-screw cap is in
«VENT» screw cap closes flask gas tight.
position for gas exchange.
•Visual control
The TPP Click
•Visual control of the gas tight position
rectangle is at 12 o'clock.
Type
Product-No.
Growth
Area
Version
Volume
max.
rectangle is at 3 o'clock.
Volume
recom.
Dimensions
lxwxh
ml
ml
mm
VENT
15
3-8
92 x 51 x 29
25
Filter
15
3-8
75
VENT
65
8-22
90076
75
Filter
65
8-22
90150
150
VENT
165
90151
150
Filter
90300
300
90301
300
25
90026
90075
Qty/
Bag
pcs
pcs
10
360
92 x 51 x 29
PS
10
360
155 x 87 x 40
PS
5
100
155 x 87 x 40
PS
5
100
15-45
210 x 122 x 50
PS
3
36
165
15-45
210 x 122 x 50
PS
3
36
VENT
410
30-85
275 x 170 x 50
PS
3
18
Filter
410
30-85
275 x 170 x 50
PS
3
18
1. 100 % cell harvesting
2. Bilateral marking area
and volume scale
3. Angled neck of flask
1
2
Qty/
Case
PS
cm2
90025
Material
3
6
Tissue Culture Flask with Re-Closable Lid 115 - 150 cm2
Complete access to the cell chamber
Features of the Tissue Culture Flask with Re-Closable Lid:
• A multi-use re-closable liquid-tight lid
• Complete access to flask chamber from above
• Stable, slip-free stacking of multiple flasks also in combination with the
standard TPP tissue culture flasks
• Optionally available with barrier which creates a growth area of 115 cm2
Opening and closing mechanism
1 Press here
2 Lift lid
Flask is available with filter screw cap only. If a «VENT» screw cap is used, a build-up of more than 0.03 bar
inside the flask could press open the lid.
Type
Product-No.
Growth
Area
Version
cm2
1
Lid Opening
lxw
Volume
max.
Volume
recom.
Dimensions
lxwxh
mm
ml
ml
mm
Material
Qty/
Bag
Qty/
Case
pcs
pcs
90552
150
lid
105 x 105
100
15-45
210 x 122 x 50
PS
3
18
90652
115
lid, barrier
105 x 105
100
15-33
210 x 122 x 50
PS
3
18
2
1. Secure stacking of multiple flasks
2. Opening and re-closing mechanism
7
Tissue Culture Flask 25 - 300 cm2 with Peel-Off Foil
Features of the Tissue Culture Flask with Peel-Off Foil:
• Available in all sizes: 25 - 300 cm2
• Re-closure of the flask is not possible
• Large pinched flap for a firm grip
• Stacking ring offers stable and slip-free stapling of several flasks
• Foil is peeled off before access to the cells
• Optionally available with barrier
Flask is available with filter screw cap only. If a «VENT» screw cap is used, a build-up of more than 0.03 bar inside the flask could press to open the foil.
Type
Product-No.
Growth
Area
Version
cm2
1
Lid Opening
lxw
Volume
max.
Volume
recom.
Dimensions
lxwxh
mm
ml
ml
mm
Material
Qty/
Bag
Qty/
Case
pcs
pcs
90028
25
peel-off
38 x 45
15
3-8
92 x 51 x 31
PS
5
70
90078
75
peel-off
87 x 92
65
8-22
155 x 87 x 45
PS
2
32
90153
150
peel-off
100 x 128
100
15-45
210 x 122 x 50
PS
3
18
90303
300
peel-off
140 x 185
200
30-85
275 x 170 x 55
PS
2
8
90551
150
peel-off, straight
opening
100 x 130
100
15-45
210 x 122 x 50
PS
3
18
90653
115
peel-off, barrier
100 x 128
100
15-33
210 x 122 x 50
PS
3
18
2
1. Large flap for easy peel-off
2. Barrier optionally available
8
Clipmax 10 cm2
Stackable
Cell culture directly on slide
Clipmax is a combination of a cell culture flask with a standard microscope slide (25 x 75 mm) with 10 cm2 surface activated growth area and detachable medium chamber. Grow adherent cells directly on Clipmax. Remove the chamber, fix and stain the cells and Clipmax is ready for the microscope.
Clipmax is especially useful for viral and mycoplasma testing, chromosome studies, toxicity tests and immunocytology.
Features of Clipmax:
• Crystal clear plastic microscope slide
• Removable medium chamber with a "click" and without the need of a
• Suitable for staining and especially for immunofluorescence
removing tool
• Initial opening protection
measurements
• Activated growth surface area for delicate cells
• Filter screw cap for optimal gas exchange with minimal evaporation
• Resistant to solvents (e.g. acetone, ethanol, xylene)
• Stackable
Type
Product-No.
Growth
Area
Version
Dimensions
lxwxh
mm
cm2
70010
10
Material
filter, clip
93 x 33 x 32
PS/COP
Qty/
Bag
Qty/
Case
pcs
pcs
1
5
1. Clipmax with filled medium chamber
3. After medium chamber is removed
2. Before medium chamber is removed
4. Remove medium chamber by a click, no tool necessary
1
2
3
4
9
«VENT» or Filter Screw Cap
Filter screw cap with hydrophobic PTFE
membrane
«VENT» or filter screw cap for TPP tissue culture flask
Type
Product-No.
Version
Dimensions
Øxh
Material
mm
Qty/
Case
pcs
pcs
90825
Vent screw cap for 25 cm² flask
24 x 16
PE
10
40
90826
Filter screw cap for 25 cm² flask
24 x 16
PE
10
40
90850
Vent screw cap for 150 / 300 cm² flask
39 x 24
PE
10
40
90856
Filter screw cap for 150 / 300 cm² flask
39 x 24
PE
10
40
90875
Vent screw cap for 75 cm² flask
33 x 21
PE
10
40
90876
Filter screw cap for 75 cm² flask
33 x 21
PE
10
40
1. Bag of 10 pcs.
1
Qty/
Bag
10
Tissue Culture Flat Tube 10 cm2 and Tissue Culture Tube 20 cm2
3-in-1 product:
Cultivation,
Examination,
Centrifugation
The tissue culture tubes are an extension to the tissue culture flask product range.
Features of the Tissue Culture Flat Tube 10 cm2:
Features of the Tissue Culture Tube 20 cm2:
• Cultivation: 10 cm2 surface activated growth area
• 20 cm2 surface activated growth area, growth area for a length of 50 mm
• Large opening for complete access of pipettes and scrappers
• Volume graduations up to the tip
• Examination: great optical clarity for visual control with inverse
• A click and the «VENT» screw cap is in the aeration position, guaranteeing
microscopes
gas exchange even in vertical position of the tube
• Sloped and flattened upper side for reduced refraction
• Fits a 15 ml standard tube adapter, can be spun up to 1'200 gx
• Centrifugation: fits any 50 ml standard tube adapter, can be spun up
• Convenient re-closable zipper bag with laser perforation
to 1´200 gx
• Conical form eases removal of pellet
• Segmental packaging for scratch-free transportation
The TPP tissue culture rack fits 8 x tissue culture flat tubes 10 in a
horizontal position for storage in a CO2 incubator
11
Tissue culture flat tube with
filter screw cap
Tissue culture flat tube on inverse
microscope
Segmental packaging allows scratch free
transportation
Type
Product-No.
Growth
Area
Version
Centrifugal
Acceleration
Dimensions
Øxl
Material
Qty/
Bag
Qty/
Case
ml
max gx
mm
pcs
pcs
91106
20
VENT
5
1'200
16 x 120
PS
20
800
91243
10
filter
10
1'200
30 x 105
PS
4
216
99018
-
rack
8 x tissue culture tube
-
200 x 88 x 72
PP
1
28
cm2
1
Volume
max.
2
1. Tissue scraper in tissue culture flat tube
2. Surface activation on 50 mm
12
Cell Scraper and Cell Spatula
100 %
cell harvesting
Features of the Cell Scraper:
Features of the Cell Spatula:
• Scraper heads made from a flexible polyethylene material
• Special formed blade with sharp edges
• Pivoting scraper head for easy maneuvering
• Small raised knobs on handle for secure grip
• 3 different blade widths
• Single-wrapped in blister packaging
• Small raised knobs on handle for secure grip
• User-friendly dispenser case
• Single-wrapped in blister packaging
The cell spatula features a specially formed blade with a sharp edge. It is
• User-friendly dispenser case
commonly used with the TPP tissue culture flask with re-closable lid or
The pivoting scraper head of the cell scrapper reaches every corner of the
peel-off foil or with large tissue culture dishes.
cell vessel. Pivot the scraper head by slight pressure on the handle with
the forefinger thus pushing the handle downwards. Slight move of the
handle will twist the head to the required position.
13
Rotation to the required position
Different blade widths available
Cell scraper in a large TPP tissue culture dish
Type
Product-No.
Length
Version
mm
Blade
Width
Material
mm
Qty/
Case
pcs
pcs
99002
240
scraper "S", rotating
13
PE
1
150
99003
300
scraper "M", rotating
20
PE
1
150
99004
362
scraper "L", rotating
25
PE
1
100
99010
195
spatula, fix
14
PP
1
150
1. Knobs for secure grip
2. Soft scraper head to protect the cells
1
Qty/
Bag
2
14
TubeSpin® Bioreactor 15 - 600 ml
TubeSpin® bioreactors are ideal for large-scale screenings and optimizing of suspension cell system process developments. The important parameters for
the production upscaling can be evaluated with small amounts. This lowers the cost and increases the efficiency of the process.
Features of TubeSpin® Bioreactor
• TubeSpin® Bioreactor 15: working volume 1 - 15 ml
• Filter screw cap with partly 5 different openings (A-B-C-D-E)
• Fit standard centrifuge apparatus
2 versions available: round or conical bottom
• TubeSpin® Bioreactor 50: working volume 1 - 35 ml
• Spin: 15´500 gx or 3'500 gx
• TubeSpin Bioreactor 450: working volume up to approx. 300 ml
• Matching adapter plates for shakers for cultivation of suspension
®
• TubeSpin Bioreactor 600: working volume up to approx. 400 ml
cells in a TubeSpin® Bioreactor 600 available
®
Type
Product-No.
Version
Centrifugal
Acceleration
Volume
87015
conical
87017
Dimensions
Øxl
Material
Qty/
Bag
Qty/
Case
max gx
ml
mm
pcs
pcs
15'500
15
17.1 x 120
PP
40
800
round
15'500
15
17.1 x 120
PP
40
800
787050
conical, barcode
15'500
50
30.0 x 115
PP
20
180
87050
conical
15'500
50
30.0 x 115
PP
20
180
87450
conical
3'500
450
96 x 145
PP
1
32
87600
conical
3'500
600
100 x 183
PP
1
26
15
Openings can be sealed
Racks (available from vendor of shakers)
Filter screw caps for sterile gas exchange
Screw cap for large bioreactor, solid or filter
version
Bioreactor 600 after centrifugation
Rack and consumables for TubeSpin® bioreactors
Type
Product-No.
Version
Capacity
Dimensions
lxwxh
pcs
mm
Material
Qty/
Bag
Qty/
Case
pcs
pcs
87355
Screw cap "solid" for 450/600
-
70 x 21
PE
1
36
87356
Screw cap "filter" for 450/600
-
70 x 21
PE
1
36
99013
Rack for 87450/87600
3 x 450 ml / 600 ml
366 x 146 x 70
PP
1
6
99017
Rack "S" for 87015/87017/87050
18 x 15 ml / 10 x 50 ml
209 x 98 x 62
PP
1
45
16
TubeSpin® Bioreactor 50 with Septum
Barcode for automated tracking
Re-closing septum with cross slit
TubeSpin® Bioreactor 50 with
Septum for robotics use
The TubeSpin® Bioreactor 50 with Septum is intended for the use during laboratory automations such as: robotics use for sterile exchange of medium
and solutions or withdrawal from cell based products.
Features of the TubeSpin® Bioreactor 50 with Septum:
Usage:
• Re-closable cross-slit septum for multiple entries
• Compatible with injection needles up to 2.1 mm (12 gauges) diameter
• Working volume <50 ml; graduation markings start at 0.5 ml
products, enabled by surface sterilization of septum
coding: lot number plus count renders each tube unique
• Elimination of laborious screwing/unscrewing during robotic
• Sterile gas exchange through filter openings in the screw cap
automation by access through septum
• Conical tube fits in standard 50 ml centrifuge adapter
• Centrifugation of suspension cells without need of prior removal
• Max. centrifugal force 15´500 gx
Product-No.
86050
re-closable cross-slit septum
• Sterile media and solution exchange or removal of cell based
• Barcode 128 on each tube for automated tracking
Type
• Multiple robot entry with injection needles and cannulas through
from tube
Version
conical, septum, barcode
Centrifugal
Acceleration
Volume
Dimensions
Øxl
max gx
ml
mm
15'500
50
30.0 x 115
Material
PP
Qty/
Bag
Qty/
Case
pcs
pcs
20
180
17
Shaker Plate for TubeSpin® Bioreactor 450 - 600
Stable fixation with holding bars
Shaker Plates for TubeSpin®
Bioreactor 450 - 600
Features of shaker plate:
• Shaker plate fits the relevant shaker model
• Guarantees largest possible volume per shaker plate
• Aluminum
• Secure fixation of the tubes with holding bars
Type
1
Version
ProductNo.
Capacity
Dimensions
lxwxh
pcs
mm
Material
Qty/
Bag
Qty/
Case
pcs
pcs
87611
Kühner plate 32 for TubeSpin® Bioreactor 600
8x4
800 x 420 x 139
Alu
1
1
87612
Kühner plate 20 for TubeSpin® Bioreactor 600
5x4
500 x 420 x 139
Alu
1
1
87613
Kühner plate 16 for TubeSpin® Bioreactor 600
4x4
420 x 420 x 139
Alu
1
1
87631
Infors Multitron plate 32 for TubeSpin® Bioreactor 600
8x4
850 x 470 x 139
Alu
1
1
87633
Infors Minitron plate 16 for TubeSpin® Bioreactor 600
4x4
480 x 420 x 139
Alu
1
1
87411
Kühner plate 32 for TubeSpin® Bioreactor 450
8x4
800 x 420 x 139
Alu
1
1
87412
Kühner plate 20 for TubeSpin® Bioreactor 450
5x4
500 x 420 x 139
Alu
1
1
87413
Kühner plate 16 for TubeSpin® Bioreactor 450
4x4
420 x 420 x 139
Alu
1
1
87431
Infors Multitron plate 32 for TubeSpin® Bioreactor 450
8x4
850 x 470 x 139
Alu
1
1
87433
Infors Minitron plate 16 for TubeSpin® Bioreactor 450
4x4
480 x 420 x 139
Alu
1
1
2
1. Shaker plate for 16 x Bioreactor 600
2. Shaker plate for 20 x Bioreactor 600
18
PCV Packed Cell Volume Tube
PCV tube without graduation
Left PCV before / right PCV after
centrifugation
Determination of cells/ml
Conversion of PCV-volume in
cells/ml by an initial parallel
determination with the
PCV-tube and a hemacytometer
Step 1
The PCV tube enables a quick and reproducible measuring technique of the cell volume. This
Determine cell number with the
hemocytometer
quick method is ideal to monitor cell growth (cell mass).
Step 2
If during a production process many parameters need to be optimized, many samples accu-
Determine volume of cell pellet with
PCV tube from 1 ml cell suspension
of the same sample
mulate at the same time. Here a quick analysis with the PCV tube and the read-out process
Step 3
with "easy read" is the method of the choice.
Divide number of cells (step 1) by
volume of cell pellet µl (step 2)
Result
A short centrifugation step (1 minute at 2'500 gx) is sufficient to form a pellet in the
Result = number of cells per µl cell pellet
­calibrated capillary. There the pellet can be read with the "easy read" measuring device.
Features of PCV Packed Cell Volume Tube:
• PCV tube available with or without scale
• Fits in micro centrifuges
• Caps available
Type
Product-No.
Version
Volume
Dimensions
Øxh
Material
Qty/
Bag
Qty/
Case
ml
mm
pcs
pcs
87005
87007
with volume scale
neutral
1
1
10.5 x 43
10.5 x 43
PS
PS
50
50
250
150
87008
cap for PCV
-
13.5 x 7
PE
50
150
19
"easy read" Measuring Device
Easy metering with "easy-read"
The most commonly used method for determination of cell number den-
The PCV tubes are particularly convenient to work with, requiring neither
sity is the counting cells manually with the hemocytometer. However, it
special training nor sophisticated expensive machines - in contrast to
is time-consuming.
automated cell counting devices.
The PCV system provides a fast, easy to use, reproducible and accurate
alternative. The PCV tubes enable the determination of the packed cell
volume (PCV) in a cell suspension, resulting in absolute data correlating
with parameters like protein content, cell count, metabolic activity and
others.
Type
Product-No.
87010
Version
«easy read»-measuring device
Features of "easy read" Measuring Device:
• Optimal with the use of PCV tubes
• Accurate and reproducible cell pellet measuring
• Solid re-usable and easy handling measuring device
• Measuring volume 0 - 5 µl
Volume
Dimensions
lxwxh
µl
mm
0-5
320 x 33 x 38
Material
Alu
Qty/
Bag
Qty/
Case
pcs
pcs
1
1
20
Serological Pipette Standard 1 - 25 ml
Features of the Serological Pipette Standard:
• Accurate volume 1 - 25 ml
• Volume identification by color coding on pipettes, blister wrap-
• Highly visible, bidirectional graduation incl. over-volume graduation
pings, dispensers, box labels and cotton plugs to some extend
• Smooth interior prevents cell hang-up or clumping inside
• Convenient, stackable dispenser box
• Excellent optical transparency
• Single wrapped in blisters
TPP pipettes are free from pyrogens, non-cytotoxic and non-hemolytic.
Fade out product line.
Type
Product-No.
Volume
Color
ml
94001
94002
94005
94010
94024
1
1
2
5
10
25
2
yellow
green
blue
orange
red
Dimensions
Øxh
Volume
Scale
mm
ml
4.8 x 270
5.5 x 270
9.5 x 295
11.0 x 295
16.0 x 300
1/100
1/100
1/10
1/10
2/10
1. TPP product range serological pipettes
2. Standard pipettes from TPP
Material
Qty/
Case
pcs
PS
PS
PS
PS
PS
400
300
200
200
100
21
Serological Pipette with Reservoir 25 - 70 ml
The reservoir adds
a considerable
­augmentation
to the volume
Features of the Serological Pipette with Reservoir:
• All features of the serological pipette standard size
plus
• Reservoir
• Optimized form of mouthpiece
• Stable, break-resistant, highly low drip pipette tip
• Fits in pipette aid Turbo-Fix or all commercially available pipette aids
• Slender, short form enables ergonomic working conditions in the sterile hood
with rubber inserts
• Small outside diameter of the tube at the tip resulting in an excellent
accessibility of these large pipettes even in small tissue culture flasks
TPP pipettes are free from pyrogens, non-cytotoxic and non-hemolytic.
Type
Product-No.
94525
94550
1
Volume
Reservoir
ml
ml
25
50
15
20
2
Color
red
purple
3
Dimensions
Øxh
Volume
Scale
mm
ml
15 / 20.5 x 345
20 / 24.0 x 345
2/10
1/10
Material
Qty/
Case
pcs
PS
PS
60
50
1. Rounded optimized mouth piece
2. Ideal combination with Turbo-Fix
3. Slender pipette tip
22
Turbo-Fix Pipette Aid
Highest pipetting speed
with Turbo-Fix
Turbo-Fix pipette aid is for aspiration and dispensing aqueous solutions with pipettes of 1 - 100 ml volume. When connected with electric supply, the TurboFix features an extraordinary high suction force and a long operation time. A turbo-quick lightweight, especially when working with large volume pipettes.
The pipetting speed can be controlled with two systems:
Features of Turbo-Fix Pipette Aid:
• Turbo suction force approx. 13.5 ml/sec
• Sensitive control of the liquid by applying various finger pressures on
(with a serological pipette 50 ml)
the two triggers, from fine to fast pipetting.
• More than 6 h pipetting cable free
• Turn the thumb wheel on the back of the instrument to regulate the
• Li-ion polymer rechargeable battery-technology
speed, providing a sensitive control of the liquid level in the pipette.
• Lightweight = 195 g
• Gravity dispense possible
• Autoclavable pipette nose Stabifix included
Type
Version
Product-No.
Dimensions
lxwxh
Material
mm
Qty/
Bag
Qty/
Case
pcs
pcs
94700
EU adapter
35 x 125 x 130
PA/POM
1
1
94701
USA/Japan adapter
35 x 125 x 130
PA/POM
1
1
94702
UK adapter
35 x 125 x 130
PA/POM
1
1
1. 20 % more suction force with power supply
2. Turbo-Fix
1
2
23
Turbo-Fix Consumables
Turbo-Fix Consumables
Type
Version
Product-No.
Material
Qty/
Bag
Qty/
Case
pcs
pcs
94750
"Stabifix" nose piece, set
various
1
1
94751
wall mount
PE
1
1
94752
replacement filter, 0.45 µm, blue
various
1
1
94753
replacement filter, 0.22 µm, red
various
1
1
94754
pipette mount in "Stabifix"
silicone
1
1
94755
filter rubber in "Stabifix"
silicone
1
1
94756
battery
lithium polymere
1
1
94757
battery compartment lid
PA
1
1
94758
housing
PA
1
1
94760
mains adapter type C, EU
various
1
1
94761
mains adapter type A, USA/Japan
various
1
1
94762
mains adapter type G, UK
various
1
1
Mains adapter types
TYPE A
TYPE C
TYPE G
23
24
Tissue Culture Test Plate 6 - 96 wells
Features of the Tissue Culture Test Plates:
Additional features with Tissue Culture Test Plates with 96 wells:
• Lid with air-venting system for controlled gas exchange with
• Manufactured according to
low evaporation
• Vented base for air flow between stacked dishes to prevent
ANSI/SLAS 1-2004 to ANSI/SLAS 4-2004
• 2 well geometries available: F- and U-bottom.
condensation
• Sloped edge allows placement of the lid in one position only
• Yellow inscription field: yellow on yellow - match!
• Surface activated growth area on spherical zone of well only
• Crystal clear transparency for excellent viewing
• Black alphanumerics for quick identification of the wells
• Clear alphanumerics between wells for orientation during
microscopy
The well geometry is an important criterion with a 96 well tissue culture plate. TPP offers 2 types of well geometries
F-base
-Excellent optical characteristics
-Suitable for precise optical
measurements, the measuring light
is not distracted by the geometry
-Suitable for microscopy applications
(bottom reading)
-Growth area 0.322 cm²
U-base
-No rims, well suited for pipetting
-Used for agglutination tests and
«+/-» evaluations
-Growth area: 0.636 cm²
-Working volume: 0.34 ml
25
1
2
4
5
3
1. Black alphanumerical labelling
2. Yellow inscription field
3. Excellent stacking
4. Alphanumerical identification mark
next to each well
5. Gripping edges
Optimal gas exchange with lowest evaporation
Type
Number
Wells
Growth
Area
Volume
InsideØ
Dimensions
lxwxh
Qty/
Bag
Qty/
Case
pcs
cm2
ml
mm
mm
pcs
pcs
92006
6
9.026
F
15.53
33.9
128 x 86 x 22
PS
1
126
92012
12
3.466
F
5.96
21.0
128 x 86 x 22
PS
1
126
92024
24
1.864
F
3.18
15.4
128 x 86 x 22
PS
1
126
92048
48
0.875
F
1.49
10.6
128 x 86 x 22
PS
1
126
92096
96
0.322
F
0.36
6.4
128 x 86 x 17
PS
1
162
92097
96
0.636
U
0.34
6.4
128 x 86 x 17
PS
1
162
92406
6
9.026
F
15.53
33.9
128 x 86 x 22
PS
4
72
92412
12
3.466
F
5.96
21.0
128 x 86 x 22
PS
4
72
92424
24
1.864
F
3.18
15.4
128 x 86 x 22
PS
4
72
92448
48
0.875
F
1.49
10.6
128 x 86 x 22
PS
4
72
92696
96
0.322
F
0.36
6.4
128 x 86 x 17
PS
6
108
92697
96
0.636
U
0.34
6.4
128 x 86 x 17
PS
6
108
Volume
InsideØ
Dimensions
lxwxh
Material
Qty/
Bag
Qty/
Case
ml
mm
mm
pcs
pcs
Product-No.
Version
Material
Tissue Culture Test Plate 6 - 96 wells, single wrapped, small packaging unit
Type
Number
Wells
Growth
Area
pcs
cm2
92106
6
9.026
F
15.53
33.9
128 x 86 x 22
PS
1
42
92112
12
3.466
F
5.96
21.0
128 x 86 x 22
PS
1
42
92124
24
1.864
F
3.18
15.4
128 x 86 x 22
PS
1
42
92148
48
0.875
F
1.49
10.6
128 x 86 x 22
PS
1
42
92196
96
0.322
F
0.36
6.4
128 x 86 x 17
PS
1
54
92197
96
0.636
U
0.34
6.4
128 x 86 x 17
PS
1
54
Product-No.
Version
26
Tissue Culture Dish 40 - 150 cm2
Features of the Tissue Culture Dish:
• Surface activation of the growth area enhancing optimal proliferation of the cells.
• Spacer on the inside of the dish lid for a constant movement of air
• Clock-numbering system (3, 6, 9 and 12) inlaid into the base of the
• Side walls of dish not surface activated
dish allows identification, region of interest definition and documenta-
• Gripping ring with serrated edges prevent accidental dropping of
tion of the zones
the dish bottom
• Lateral yellow inscription field on the lid
• Stacking ring on the lid and corresponding on the base result in
an extremely secure stacking feature
TPP tissue culture dishes are designed for manual handling only.
• Vents in the dish base for airflow between stacked dishes for consistent growth conditions and prevention of condensation
• Impeccable optical clarity enables a visual control of the cells in
stacked dishes using transmitted light.
27
Clock-numbering system inlaid into the base of
the dish
The gripping ring: often copied, never like
the original!
The TPP Gripping Ring: often copied, but never like the original!
Type
Growth
Area
InsideØ
cm2
mm
mm
pcs
pcs
93040
9.2
34
40 x 11
PS
20
900
93060
22.1
53
60 x 16
PS
14
840
93100
60.1
87
96 x 21
PS
10
240
93150
147.8
137
146 x 21
PS
5
100
Product-No.
Dimensions
Øxh
Material
Qty/
Bag
Qty/
Case
1. Convenient peel-off bag
2. Stacked tissue culture dishes
3. Yellow inscription field
1
2
3
28
Vacuum Filtration "rapid"-Filtermax 150 - 1000 ml
Quadratic vacuum
filtration, conveniently excellent!
1
2
1. Filter top and flask are available
separately
2. Flask can be used as medium
­reservoir
Features of the quadratic Vacuum Filtration "rapid"-Filtermax:
• Large quadratic filter surface of 49 cm2 and 69 cm2 respectively
• Space saving medium reservoir
• Special lamella grid support and premium PES filter membrane, pore
• Tapered form at the neck enables large and small hands a firm and
size of 0.22 µm with low protein binding capacity result in an extreme
slip free grip of the "rapid"-Filtermax system
• Each filter set comes with an adapter for the vacuum connection
high flow rate
• Square thus secure footprint eliminates the risk of encompassment of
the filter unit by the vacuum tubing
hose with an inside diameter of Ø 6 - 10 mm and a separately
packed screw cap
Full flexibility: Choice of filter set, top only or flask only, all provided with a GL-45 compatible screw thread.
TPP recommends filling the liquid into the filter first and then applying the vacuum.
Type
Product-No.
99150
99155
99157
99250
99255
99257
99500
99505
99507
99950
99955
99957
Filtration
Area
Volume
Pore
Size
Dimensions
lxwxh
cm2
ml
µm
mm
49
49
49
49
49
49
69
69
-
150
150
150
250
250
250
500
500
500
1'000
1'000
1'000
0.22
0.22
0.22
0.22
0.22
0.22
0.22
0.22
-
93 x 93 x 103
90 x 89 x 57
93 x 93 x 63
93 x 93 x 145
90 x 89 x 75
93 x 93 x 87
93 x 93 x 213
90 x 89 x 111
93 x 93 x 121
111 x 111 x 285
108 x 108 x 143
111 x 111 x 160
Material
PS/PES
PS/PES
PS
PS/PES
PS/PES
PS
PS/PES
PS/PES
PS
PS/PES
PS/PES
PS
Qty/
Bag
Qty/
Case
pcs
pcs
1
1
1
1
1
1
1
1
1
1
1
1
18
36
24
12
24
24
10
21
36
9
12
20
29
Syringe Filter 0.22 µm and 0.45 µm
Diameter 33 mm for a stable
fit of the syringe filter on a
50 ml centrifuge tube.
TPP syringe filters are intended to filter aqueous solutions such as tissue culture medium, buffers, protein solution, virus suspensions and DNA.
Features of the Syringe Filter:
• PES filter membrane with pore size 0.45 µm for a pre-filtration
• <100 µl dead volume
• PES filter membrane with pore size 0.22 µm for sterilization
• Burst pressure 10 bar
• Membrane with a high flow rate with minimal protein binding
• Single packed in blister
• Standard Luer-lock connection enables a filtration at high pressure
with a syringe
Type
1
Filtration
Area
Pore
Size
Dimensions
Øxh
cm2
µm
mm
99722
6
0.22
33 x 27
99745
6
0.45
33 x 27
Product-No.
1. Stable fit on the filter on a 50 ml centrifuge tube
Material
Qty/
Bag
Qty/
Case
pcs
pcs
PET
1
200
PET
1
200
30
Centrifuge Tube 13 - 50 ml
Features of the Centrifuge Tube:
• White writing circle on screw cap for easy labelling with any writing
• Gas and aerosol tight cap
• Graduations all the way down to 0.1 ml and 0.5 ml respectively
instrument
• Convenient racks available
• Caps that cannot be over-tightened
TPP processes only the highest grade of raw material that fulfils the requirements of USP Class VI. No additives are employed. By this we prevent leaching of substances into the end user´s sample.
Centrifugal Acceleration (gx)
The limit on "gx" is influenced by:
The maximum on "gx" depends on:
• type of rotor (diameter)
• material of tubes
• speed / revolution per minute
• centrifugation probe (for ex. organic solvents)
1
2
3
1. Writing area
2. TPP tubes, all with 2-way thread
3. Screw cap cannot be over-tightened
31
Volume graduation
White marking circle, the TPP advantage
Filled racks simplify procedures
50 ml tube with round bottom
Type
Volume
Product-No.
Version
Dimensions
Øxh
Centrifugal
Acceleration
mm
max gx
17.1 x 120
15'500
ml
Material
PP
Qty/
Bag
Qty/
Case
pcs
pcs
40
800
91015
15
conical
91016
13
round, short
17.1 x 105
15'500
PP
40
800
91017
15
round, long
17.1 x 120
15'500
PP
40
800
91019
13
flat
17.1 x 100
15'500
PP
40
800
91050
50
conical
30.0 x 115
15'500
PP
20
360
91051
50
conical, self-standing
30.0 x 115
15'500
PP
20
320
91056
50
round
30.0 x 115
15'500
PP
20
360
91115
15
conical
17.1 x 120
1'700
PS
40
800
99017
18 x 15 ml / 10 x 50 ml
rack "S"
209 x 98 x 62
-
PP
1
45
99019
30 x 15 ml / 20 x 50 ml
rack "L"
209 x 172 x 62
-
PP
1
30
Qty/
Bag
Qty/
Case
Centrifuge tube 15 ml / 50 ml, small unit packaging
Type
Product-No.
Volume
Version
Dimensions
Øxh
Centrifugal
Acceleration
ml
Material
mm
max gx
pcs
pcs
91014
15
conical
17.1 x 120
4.0
PP
40
360
91054
50
conical
30.0 x 115
3.0
PP
20
160
Capacity
Centrifugal
Acceleration
Material
Qty/
Bag
Qty/
Case
pcs
max gx
pcs
pcs
Rack filled with Centrifuge Tubes 15 ml or 50 ml
Type
Product-No.
Volume
Version
ml
91515
15
rack "L" + 15 ml
30 x 15 ml, conical
15'500
PP
1
10
91550
50
rack "L" + 50 ml
20 x 50 ml, conical
15'500
PP
1
10
32
Cryo Tube 1.2 - 5 ml
Features of Cryo Tube:
• Storage of samples in freezers or similar low-temperature equipment
• Single-handed operation with the use of the cryogenic rack #99016
up to -196 °C
with locking system in the grooves
• External thread without silicone gasket
• Color-coding inserts
• Secure and tight closure of the tube
• Convenient, re-closable bag
• Self-standing on star-shaped foot
Do not exceed the recommended maximum working volume.
TPP recommends using the cryo tubes for storage in the vapor-phase. If used in the liquid phase, nitrogen may penetrate into the tube and cause a
build-up of pressure due to evaporation of nitrogen. This may lead to explosion of the tube and the release of bio hazardous material. If you still decide
to store in liquid nitrogen, TPP recommends use of additional wrapping such as welded tubes. Always use appropriate safety equipment and procedures.
1
2
3
1. Cryo box can be opened single
handed
2. Cryo rack
3. Cryo tube with writing area and
volume scale
33
Single handed operation possible
with the cryo rack
Tube with external thread
Sealing lip in screw cap for secure closure =
no fiddling with a silicone ring necessary
Type
Volume
max.
Volume
recom.
Dimensions
Øxh
Qty/
Bag
Qty/
Case
ml
ml
mm
pcs
pcs
89012
0.9
0.7
12 x 37
PP
100
800
89020
1.5
1.3
12 x 48
PP
100
800
89040
3.5
3.3
12 x 75
PP
100
400
89050
4.5
4.3
12 x 90
PP
100
400
99014
box "L"
-
133 x 133 x 95
PP
1
10
99015
box "S"
-
133 x 133 x 45
PP
1
20
99016
rack
-
209 x 109 x 24
PP
1
12
Material
Qty/
Bag
Qty/
Case
pcs
pcs
Product-No.
Material
Colored inserts for cryo tubes are available in:
blue, yellow, green, lilac, red and white
Type
Product-No.
Dimensions
Øxh
Color
mm
99020
11 x 1
1 bag of each color
PP
600
7800
89801
11 x 1
white
PP
600
3600
89802
11 x 1
blue
PP
600
3600
89803
11 x 1
yellow
PP
600
3600
89804
11 x 1
green
PP
600
3600
89805
11 x 1
lilac
PP
600
3600
89806
11 x 1
red
PP
600
3600
34
Rack and Box
Features of all Racks and Boxes:
• Alphanumerical inscription to identify your samples
• Heat resistant autoclavable material
• Re-usable
Rack for TubeSpin® Bioreactor 450 / 600
• Fits 3 x tubes
• Stackable
• Safe footprint
Rack «S» or «L»
Cryo Box «S» or «L»
• Fits any 15 ml and 50 ml centrifuge tube
• Cryo box "S" fits 81 x cryo tubes 1.2 / 2 ml
• Quickly assembled and disassembled
• Cryo box "L" fits 81 x cryo tubes 4 / 5 ml
• Saves space if stored dismantled
• Storage of samples at low temperatures up to -196 °C
• Form stable even in lowest temperatures
• Single handling of lid even after multiple usage
Rack for Tissue Culture Tubes
Cryo Rack
• Fits tissue culture flat tubes 10,
• Fits 40 x cryo tubes
tissue culture tubes 20, centrifuge tubes 15 ml and 50 ml
• Transparent top • Protection rim to protect shifting of tissue culture flat tubes 10
• Ready-mounted rubber feet
• Locking system in the grooves allows one hand operation
when used with the star-shaped foot TPP cryo tubes
35
1
2
4
1. Cryo rack
2. Rack "S" filled with 15 ml tubes
3. Rack for Bioreactor 600 or 450
Details of click system
4. Black alpha-numeric scale
3
Type
Capacity
Dimensions
Øxh
Qty/
Bag
Qty/
Case
pcs
mm
pcs
pcs
99013
Bioreactors 3 x 450 / 600
366 x 146 x 70
PP
1
6
99014
Cryo tubes 81 x 4 / 5 ml
133 x 133 x 95
PP
1
10
99015
Cryo tubes 81 x 1.2 / 2 ml
133 x 133 x 45
PP
1
20
99016
Cryo tubes 40 x with star foot
209 x 109 x 24
PP
1
12
99017
Centrifuge tubes 18 x 15 ml / 10 x 50 ml
209 x 98 x 62
PP
1
45
200 x 88 x 72
PP
1
28
209 x 172 x 62
PP
1
30
Product-No.
99018
99019
Tissue culture tubes 8 x 10 cm2 / 20 cm2
Centrifuge tubes 30 x 15 ml / 20 x 50 ml
Material
36
3-B Product "Clean Room"
Safety in grade
clean aseptic
room with TPP
The triple bagged packaging (3-B) solution from TPP meets the increas-
Features of 3-B products:
ingly more stringent clean room requirements.
• Order code: TPP standard product plus prefix 3
With the standard packaging, contamination adhering to the outside of
the bag could be unintentionally carried into clean room areas. The 3-B
packaging system prevents contamination from reaching highly sensitive
production areas, thus significantly increasing safety for handling substances in a sterile environment.
• SAL-value: 10-6
• Each product is triple bagged in three peel-open bags
• The safety-open-style peel-open bags are increasingly sized,
so that during handling of one bag the next inner bag is not
accidentally broken rendering it contaminated
• Safety-open-style:
3 - outer, 2 - middle, 1 - inner bag
• Subsequent numbering assists to identify status of packaging
• Bag #1 (seldom 2) is labeled with the product data: product
number and description, lot number and EXP
1
2
1. Cryo tubes in 3-B
2. Pipettes in 3-B
37
Step 1
Open bag 3 and pull out sterile bag 2
Transfer bag 2 to sluice
Step 2
Open bag 2 in sluice and carefully pull out sterile bag
Transfer bag 1 to gowning area
Step 3
Open bag 1 in aseptic room
Use product
Examples
Type
1
Product-No.
Version
3-B
TPP standard order number plus prefix 3, triple bagged
389020
TPP standard order number, for ex. 89020 plus prefix 3, 3-B cryo tube 2 ml
390026
TPP standard order number, for ex. 90026 plus prefix 3, 3-B tissue culture flask 25 cm2
391050
TPP standard order number, for ex. 91050 plus prefix 3, 3-B centrifuge tube 50 ml
394005
TPP standard order number, for ex. 94005 plus prefix 3, 3-B serological pipette 5 ml
399250
TPP standard order number, for ex. 99250 plus prefix 3, 3-B vacuum filtration "rapid"-Filtermax 250 ml
2
3
1. Filtermax in 3-B
2. Tube in 3-B
3. Flask in 3-B
38
Quality Assurance
Quality Management
TPP is ISO 9001:2015 certified. The quality standard is audited and confirmed by re-certification processes regularly.
The certificate can be downloaded at www.tpp.ch.
Quality Control: from Raw Material to the ready TPP Product
TPP provides their end users with the highest quality in tissue culture plastics through the detailed oriented design and manufacturing processes. This intricate monitoring is possible with the complex quality assurance system. Products are dispatched only when all criteria are fulfilled.
Therefore, TPP guarantees faultless and top-quality products for all areas of tissue culture and laboratory uses.
Raw Material
Production
Maintenance
Quality Control
Dispatch Control
All incoming materials
Production is in clean
For a 24/7 manufactur-
All products are tested
We perform random
and products pass a rig-
room environment on
ing process the main­
during and after the
examinations of the
orous and documented
in-line production lines.
tenance and servicing of
manufacturing process
quality and quantity of
quality control, based
the molding forms,
based on strict specifi-
the final product with
on specifications.
­production lines and
cations. Each working
documentation of the
Deliveries are accepted
infrastructures is
step can be reviewed for
results. After release of
from checked vendors
extremely important.
years by a sophisticated
the data a quality
only.
Competent specialists
IT system. Test results
­certificate can be
daily arrange the availa-
and corrective actions
­generated on
bility of the equipment.
are documented.
www.tpp.ch.
Sterile
All TPP products are sterilized by radiation. Sterility is maintained as long as the packaging remains
Expiry Date
Products that are beyond their expiry date (EXP) can cause spurious results or errors. Such products should
Lot Number
Each product packaging carries a well visible, black lot number. This batch identification number ensures traceability,
Single Use
All TPP products, except accessories such as racks etc., are intended for single use only.
Caution
All products are solely intended for general laboratory use by competent staff. The products have
Certificate
Quality certificate from TPP can be generated online at www.tpp.ch.
unopened and free from visible defect. TPP guaranties a "Sterility Assurance Level" (SAL) of 10-³.
not be used. The shelf-life is 6 years. Thereafter TPP will no more accept guarantee claims.
analyses and monitoring of all data of raw material supply, processes and quality control over a period of several years.
not been registered for their direct use on humans.
39
Quality Standards
Production
TPP products are manufactured in a clean room environment.
Free from pyrogens and detectable endotoxins
Endotoxins belong to the pyrogens, substances that are eliciting fever. They can influence growth and functionality of tissue cultures.
All TPP products are tested systematically with the LAL test to prove the absence of endotoxins. The value of endotoxin is <0.06 EU/ml
with few exceptions. Exact data are available from the quality certificates that can be generated under www.tpp.ch.
Free from detectable RNA/DNA
RNA/DNA are genetic information carriers. Material that is contaminated with RNA/DNA can lead to false positive signals during PCR.
They unintentionally amplify along with the desired template. Independent research laboratories periodically test and confirm that no
foreign RNA/DNA is detectable with TPP products.
Free from detectable RNase/DNase
RNases/DNases are enzymes that degrade RNA/DNA. They are components of each living cell and cannot be destroyed by the sterilization
process. Independent research laboratories periodically test and confirm that no foreign RNase/DNase is detectable with TPP products.
Sterility
Sterility describes the aseptic condition, i.e. the absence of living organisms. During the sterilization process transferable organism such
as funguses, bacteria or viruses are killed. TPP receives product sterility through a sterile production process followed by sterilization.
TPP guarantees a "Sterility Assurance Level" (SAL) of 10-3. The sterility is validated conforming DIN EN ISO 11137.
Growth treatment
To optimally enhance the adhesion of the cells to the plastic surface, the growth areas of all TPP tissue culture vessels are activated
by an optic-mechanic method, developed by TPP. The result is a plane and growth enhancing surface that has an optimal proliferation
effect. TPP tissue culture products are tested lot wise for their different tissue growth criteria.
Free from cytotoxic substances
Cytotoxic substances are cell poisons that have the ability to weaken or even kill cells. All TPP tissue culture products are free from cytotoxic substances. TPP tests this regularly conforming DIN EN ISO 10993-5.
Leaching
Leaching signifies the slow compounds dissolving (leaching) from plastic ware into buffer and solvents. TPP avoids this by using
ultrapure raw-material that is certified to be free of chemical softeners and additive. Recycled and by this potentially contaminated raw
material never is processed with TPP products. All raw materials conform to Pharmacopoeia USP Class VI. Additionally optimized molds
that work without any slip agents are used during the production process.
All information in the catalog are given in good faith and without warranty of accuracy and completeness,
we assume no liability for printing errors, mistakes and product changes.
40
Raw Materials
TPP processes only the highest grades of raw materials. No stripping agents or softeners are employed.
TPP products are free from animal components and therefore free from TSE/BSE.
Polyethylene
Heat Resistance
70 - 80 °C / cannot be autoclaved
Low-Temperature Resistance
-40 °C
Optical Properties
Opaque
Mechanical Properties
Low tensile strength and surface hardness
Polypropylene
Heat Resistance
100 - 120 °C / can be autoclaved
Low-Temperature Resistance
-190 °C
Optical Properties
Transparent, but not crystal clear
Mechanical Properties
High fracture strength, dimensionally stable, high stiffness
Polystyrene
Heat Resistance
60 - 75 °C / cannot be autoclaved
Low-Temperature Resistance
-40 °C
Optical Properties
Crystal clear, shiny surface / 90 % transparency index (no transparence at <330 nm,
for ex. UV-light)
Mechanical Properties Low fracture ductility, not suitable for use at high centrifugal loads
Disposal
The materials are pure hydrocarbon compounds and therefore neutral to the environment. No harmful substances are generated during
controlled burning.
41
Transportation and Storage
Storage Recommendations
Packaging
TPP recommends a careful storage of the fragile
Modular TPP cases allow freedom of combination during stack-
and breakable TPP products:
ing. The FSC certified cardboard comes from well managed for-
• Relative humidity of max. 50 - 60 %
ests and other controlled sources. The one-way palettes conform to the international, phytosanitary directives
• Temperature of 10 - 30 °C
(ISPM 15 standard).
• Do not expose to direct sunlight
Jumbo-Cases
The very stable Jumbo cover cases give highest protection during transportation and reduce the damage occurring to the
Icons displayed on the TPP cases
fragile tissue culture products. TPP recommends the use of
protection cases when shipping the goods through couriers
Breakable
with automatic distribution centers.
Type of Case, Standard
L x W x H in mm
1/1-case, brown
390 x 330 x 460
Protect against humidity
Do not expose to direct sunlight
1
1/2-case, brown
390 x 330 x 230
1/4-case, brown
390 x 330 x 110
1/4-dispenser, white
390 x 330 x 110
1/16-case, brown
390 x 165 x 55
1/4L-sample case, yellow
390 x 165 x 230
1/8L-sample case, yellow
390 x 165 x 110
1/16L-sample case, yellow
390 x 165 x 55
Type of Case, Cover Case
L x W x H in mm
Jumbo 1, cover case, yellow
425 x 340 x 490, fits = 1 x 1/1-cases
Jumbo 2, cover case, yellow
673 x 413 x 490, fits = 2 x 1/1-cases
Jumbo 1/2, cover case, yellow
425 x 340 x 260, fits = 1 x 1/2-case
Jumbo 1/4, cover case, yellow
400 x 330 x 140, fits = 1 x 1/4-case
2
3
1500 mm
118
1970 mm
118
Do not open with sharp instrument
1200 mm
Land/sea freight
00
10
1200 mm
Air freight
1. Stable Jumbo 1 cover case
2. TPP cases in modular system
3. Yellow sample box
00
10
42 Quick review
Page 4
Tissue Culture Flask 25 - 300 cm2
Type
Product-No.
Growth
Area
Version
Material
cm2
Page 6
Qty/
Case
Case
Weight/
Case
pcs
pcs
Size
kg
90025
25
VENT
PS
10
360
1/1
6.5
90026
25
Filter
PS
10
360
1/1
6.5
90075
75
VENT
PS
5
100
1/1
6.0
90076
75
Filter
PS
5
100
1/1
6.0
90150
150
VENT
PS
3
36
1/1
5.0
90151
150
Filter
PS
3
36
1/1
5.0
90300
300
VENT
PS
3
18
1/1
4.5
90301
300
Filter
PS
3
18
1/1
4.5
Qty/
Bag
Qty/
Case
Case
Weight/
Case
pcs
pcs
Size
kg
Tissue Culture Flask with Re-Closable Lid 115 - 150 cm2
Type
Product-No.
Growth
Area
Version
Material
cm2
Page 7
Qty/
Bag
90552
150
lid
PS
3
18
1/2
3.0
90652
115
lid, barrier
PS
3
18
1/2
3.0
Tissue Culture Flask 25 - 300 cm2 with Peel-Off Foil
Type
Product-No.
Growth
Area
Version
Material
cm2
Page 8
Qty/
Case
Case
Weight/
Case
pcs
pcs
Size
kg
90028
25
peel-off
PS
5
70
1/4
1.3
90078
75
peel-off
PS
2
32
1/2
1.9
90153
150
peel-off
PS
3
18
1/2
2.2
90303
300
peel-off
PS
2
8
1/2
1.9
90551
150
peel-off, straight opening
PS
3
18
1/2
2.2
90653
115
peel-off, barrier
PS
3
18
1/2
2.3
Qty/
Bag
Qty/
Case
Case
Weight/
Case
pcs
pcs
Size
kg
PS/COP
1
5
1/16
0.8
Material
Qty/
Bag
Qty/
Case
Case
Weight/
Case
pcs
pcs
Size
kg
Clipmax 10 cm2
Type
Product-No.
Growth
Area
Version
Material
cm2
70010
Page 9
Qty/
Bag
10
filter, clip
«VENT» or Filter Screw Cap
Type
Product-No.
Version
90825
Vent screw cap for 25 cm² flask
PE
10
40
1/16
0.3
90826
Filter screw cap for 25 cm² flask
PE
10
40
1/16
0.3
90850
Vent screw cap for 150 / 300 cm² flask
PE
10
40
1/16
0.3
90856
Filter screw cap for 150 / 300 cm² flask
PE
10
40
1/16
0.3
90875
Vent screw cap for 75 cm² flask
PE
10
40
1/16
0.3
90876
Filter screw cap for 75 cm² flask
PE
10
40
1/16
0.3
Quick review
Tissue Culture Flat Tube 10 cm2 and Tissue Culture Tube 20 cm2
Type
Product-No.
Growth
Area
Version
Material
cm2
Qty/
Bag
Qty/
Case
Case
Weight/
Case
pcs
pcs
Size
kg
91106
20
VENT
PS
20
800
1/1
8.1
91243
10
filter
PS
4
216
1/1
7.9
99018
-
rack
PP
1
28
1/2
3.1
Cell Scraper and Cell Spatula
Type
Product-No.
Version
Blade
Width
Material
mm
Qty/
Bag
Qty/
Case
Case
Weight/
Case
pcs
pcs
Size
kg
99002
scraper "S", rotating
13
PE
1
150
1/4
1.7
99003
scraper "M", rotating
20
PE
1
150
1/4
2.0
99004
scraper "L", rotating
25
PE
1
100
1/4
2.0
99010
spatula, fix
14
PP
1
150
1/4
1.4
TubeSpin® Bioreactor 15 - 600 ml
Type
Product-No.
Version
Volume
Material
ml
Qty/
Bag
Qty/
Case
Case
Weight/
Case
pcs
pcs
Size
kg
87015
conical
15
PP
40
800
1/1
8.1
87017
round
15
PP
40
800
1/1
8.1
787050
conical, barcode
50
PP
20
180
1/2
3.2
87050
conical
50
PP
20
180
1/2
3.2
87450
conical
450
PP
1
32
1/1
3.6
87600
conical
600
PP
1
26
1/1
3.6
Rack and Consumables for TubeSpin® Bioreactor
Type
Product-No.
Version
Capacity
Material
Qty/
Bag
Qty/
Case
Case
Weight/
Case
pcs
pcs
Size
kg
PE
1
36
1/4
1.0
PE
1
36
1/4
1.0
PP
1
6
1/2
2.5
PP
1
45
1/2
4.6
pcs
87355
87356
99013
99017
Screw cap "solid"
for 450/600
Screw cap "filter"
for 450/600
Rack for
3 x 450 ml / 600 ml
87450/87600
Rack "S" for
18 x 15 ml / 10 x 50 ml
87015/87017/87050
TubeSpin® Bioreactor 50 with Septum
Type
Product-No.
Version
Volume
Material
ml
86050
conical, septum, barcode
50
PP
Qty/
Bag
Qty/
Case
Case
Weight/
Case
pcs
pcs
Size
kg
20
180
1/2
3.2
Page 10
Page 12
Page 14
Page 15
Page 16
43
44 Quick review
Page 17
Shaker Plate for TubeSpin® Bioreactor 450 - 600
Type
Page 18
Version
Product-No.
Material
pcs
pcs
Size
kg
Alu
1
1
spec.
11.0
87612
Kühner plate 20 for TubeSpin® Bioreactor 600
Alu
1
1
spec.
6.0
87613
Kühner plate 16 for TubeSpin® Bioreactor 600
Alu
1
1
spec.
5.0
87631
Infors Multitron plate 32 for TubeSpin® Bioreactor 600
Alu
1
1
spec.
11.0
87633
Infors Minitron plate 16 for TubeSpin® Bioreactor 600
Alu
1
1
spec.
5.0
87411
Kühner plate 32 for TubeSpin® Bioreactor 450
Alu
1
1
spec.
11.0
87412
Kühner plate 20 for TubeSpin® Bioreactor 450
Alu
1
1
spec.
6.0
87413
Kühner plate 16 for TubeSpin® Bioreactor 450
Alu
1
1
spec.
5.0
87431
Infors Multitron plate 32 for TubeSpin® Bioreactor 450
Alu
1
1
spec.
11.0
87433
Infors Minitron plate 16 for TubeSpin® Bioreactor 450
Alu
1
1
spec.
5.0
Qty/
Bag
Qty/
Case
Case
Weight/
Case
pcs
pcs
Size
kg
50
250
1/4
0.6
Version
Product-No.
Volume
Material
with volume scale
1
PS
87007
neutral
1
PS
50
150
1/16
0.3
87008
cap for PCV
-
PE
50
150
1/16
0.2
Material
Qty/
Bag
Qty/
Case
Case
Weight/
Case
pcs
pcs
Size
kg
1
1
1/16
0.4
Qty/
Case
Case
Weight/
Case
pcs
Size
kg
"easy read" Measuring Device
Type
Version
Product-No.
Volume
µl
87010
«easy read»-measuring device
0-5
Alu
Serological Pipette Standard 1 - 25 ml
Type
Volume
Product-No.
Color
Material
ml
94001
1
yellow
PS
400
1/4
2.1
94002
2
green
PS
300
1/4
2.0
94005
5
blue
PS
200
1/4
2.5
94010
10
orange
PS
200
1/4
3.0
94024
25
red
PS
100
1/4
2.5
Color
Material
Qty/
Case
Case
Weight/
Case
pcs
Size
kg
Serological Pipette with Reservoir 25 - 70 ml
Type
Page 22
Weight/
Case
Kühner plate 32 for TubeSpin® Bioreactor 600
87005
Page 21
Case
87611
ml
Page 20
Qty/
Case
PCV Packed Cell Volume Tube
Type
Page 19
Qty/
Bag
Volume
Reservoir
ml
ml
94525
25
15
red
PS
60
1/4
1.5
94550
50
20
purple
PS
50
1/4
1.5
Material
Qty/
Bag
Qty/
Case
Case
Weight/
Case
pcs
pcs
Size
kg
Product-No.
Turbo-Fix Pipette Aid
Type
Product-No.
Version
94700
EU adapter
PA/POM
1
1
1/4
1.6
94701
USA/Japan adapter
PA/POM
1
1
1/4
1.6
94702
UK adapter
PA/POM
1
1
1/4
1.6
Quick review
Turbo-Fix Consumables
Type
Version
Product-No.
94750
Material
"Stabifix" nose piece, set
Qty/
Bag
Qty/
Case
Case
Weight/
Case
pcs
pcs
Size
kg
various
1
1
spec.
spec.
94751
wall mount
PE
1
1
spec.
spec.
94752
replacement filter, 0.45 µm, blue
various
1
1
spec.
spec.
94753
replacement filter, 0.22 µm, red
various
1
1
spec.
spec.
94754
pipette mount in "Stabifix"
silicone
1
1
spec.
spec.
94755
filter rubber in "Stabifix"
silicone
1
1
spec.
spec.
94756
battery
lithium polymere
1
1
spec.
spec.
94757
battery compartment lid
PA
1
1
spec.
spec.
94758
housing
PA
1
1
spec.
spec.
94760
mains adapter, EU
various
1
1
spec.
spec.
94761
mains adapter, USA/Japan
various
1
1
spec.
spec.
94762
mains adapter, UK
various
1
1
spec.
spec.
Tissue Culture Test Plate 6 - 96 wells
Type
Number
Wells
Growth
Area
pcs
cm2
92006
6
9.026
F
92012
12
3.466
F
Product-No.
Version
Material
Qty/
Bag
Qty/
Case
Case
Weight/
Case
pcs
pcs
Size
kg
PS
1
126
1/1
8.3
PS
1
126
1/1
9.1
92024
24
1.864
F
PS
1
126
1/1
10.0
92048
48
0.875
F
PS
1
126
1/1
10.0
92096
96
0.322
F
PS
1
162
1/1
11.7
92097
96
0.636
U
PS
1
162
1/1
11.9
92406
6
9.026
F
PS
4
72
1/2
4.8
92412
12
3.466
F
PS
4
72
1/2
5.1
92424
24
1.864
F
PS
4
72
1/2
5.6
92448
48
0.875
F
PS
4
72
1/2
5.6
92696
96
0.322
F
PS
6
108
1/2
7.5
92697
96
0.636
U
PS
6
108
1/2
7.6
Tissue Culture Test Plate 6 - 96 wells, small packaging unit
Type
Product-No.
Number
Wells
Growth
Area
pcs
cm2
Version
Material
Qty/
Bag
Qty/
Case
Case
Weight/
Case
pcs
pcs
Size
kg
92106
6
9.026
F
PS
1
42
1/2
3.5
92112
12
3.466
F
PS
1
42
1/2
3.5
92124
24
1.864
F
PS
1
42
1/2
3.5
92148
48
0.875
F
PS
1
42
1/2
3.5
92196
96
0.322
F
PS
1
54
1/2
3.5
92197
96
0.636
U
PS
1
54
1/2
3.5
Tissue Culture Dish 40 - 150 cm2
Type
Product-No.
Growth
Area
Material
cm2
Qty/
Bag
Qty/
Case
Case
Weight/
Case
pcs
pcs
Size
kg
93040
9.2
PS
20
900
1/2
4.0
93060
22.1
PS
14
840
1/1
8.2
93100
60.0
PS
10
240
1/1
6.7
93150
147.0
PS
5
100
1/1
6.6
Page 23
Page 24
Page 25
Page 26
45
46 Quick review
Page 28
Vacuum Filtration "rapid"-Filtermax 150 - 1000 ml
Type
Page 29
Volume
Pore
Size
cm2
ml
µm
99150
49
150
0.22
99155
49
150
99157
-
99250
Material
Qty/
Bag
Qty/
Case
Case
Weight/
Case
pcs
pcs
Size
kg
PS/PES
1
18
1/2
3.2
0.22
PS/PES
1
36
1/2
3.0
150
-
PS
1
24
1/2
2.6
49
250
0.22
PS/PES
1
12
1/2
2.7
99255
49
250
0.22
PS/PES
1
24
1/2
2.4
99257
-
250
-
PS
1
24
1/2
3.1
99500
49
500
0.22
PS/PES
1
10
1/2
2.7
99505
49
500
0.22
PS/PES
1
21
1/2
2.5
99507
-
500
-
PS
1
36
1/1
6.0
99950
69
1000
0.22
PS/PES
1
9
1/1
4.5
99955
69
1000
0.22
PS/PES
1
12
1/2
1.7
99957
-
1000
-
PS
1
20
1/1
5.6
Material
Qty/
Bag
Qty/
Case
Case
Weight/
Case
pcs
pcs
Size
kg
Syringe Filter 0.22 µm and 0.45 µm
Type
Page 30
Filtration
Area
Product-No.
Filtration
Area
Pore
Size
cm2
µm
99722
6
0.22
PET
1
200
99745
6
0.45
PET
1
200
Volume
Version
Material
Qty/
Bag
Qty/
Case
Case
Weight/
Case
pcs
pcs
Size
kg
Product-No.
1.8
1.8
Centrifuge Tube 13 - 50 ml
Type
Product-No.
ml
Page 31
1/4
(5 x box)
1/4
(5 x box)
91015
15
conical
PP
40
800
1/1
6.5
91016
13
round, short
PP
40
800
1/1
6.6
91017
15
round, long
PP
40
800
1/1
6.6
91019
13
flat
PP
40
800
1/1
6.2
91050
50
conical
PP
20
360
1/1
6.0
91051
50
conical, selfstanding
PP
20
320
1/1
6.0
91056
50
round
PP
20
360
1/1
6.0
91115
15
conical
PS
40
800
1/1
7.4
99017
18 x 15 ml / 10 x 50 ml
rack "S"
PP
1
45
1/2
4.6
99019
30 x 15 ml / 20 x 50 ml
rack "L"
PP
1
30
1/2
5.0
Rack filled with Centrifuge Tubes 15 ml or 50 ml
Type
Product-No.
Volume
Version
ml
Capacity
Material
pcs
Qty/
Bag
Qty/
Case
Case
Weight/
Case
pcs
pcs
Size
kg
91515
15
rack "L" + 15 ml
30 x 15 ml, conical
PP
1
10
1/1
4.5
91550
50
rack "L" + 50 ml
20 x 50 ml, conical
PP
1
10
1/1
5.2
Quick review
Centrifuge Tube 15 ml / 50 ml, small unit packaging
Type
Volume
Product-No.
Version
Material
ml
Qty/
Bag
Qty/
Case
Case
Weight/
Case
pcs
pcs
Size
kg
91014
15
conical
PP
40
360
1/2
4.0
91054
50
conical
PP
20
160
1/2
3.0
Cryo Tube 1.2 - 5 ml
Type
Material
Product-No.
Qty/
Bag
Qty/
Case
Case
Weight/
Case
pcs
pcs
Size
kg
89012
PP
100
800
1/4
1.7
89020
PP
100
800
1/4
2.0
89040
PP
100
400
1/4
1.6
89050
PP
100
400
1/4
1.8
99014
PP
1
10
1/2
2.7
99015
PP
1
20
1/2
3.8
99016
PP
1
12
1/4
1.8
Insert for Cryo Tubes
Type
Color
Product-No.
Material
Qty/
Bag
Qty/
Case
Case
Weight/
Case
pcs
pcs
Size
kg
99020
1 bag of each color
PP
600
7800
1/4
1.3
89801
white
PP
600
3600
1/16
0.6
89802
blue
PP
600
3600
1/16
0.6
89803
yellow
PP
600
3600
1/16
0.6
89804
green
PP
600
3600
1/16
0.6
89805
lilac
PP
600
3600
1/16
0.6
89806
red
PP
600
3600
1/16
0.6
Rack and Box
Type
Capacity
Product-No.
Material
pcs
Qty/
Bag
Qty/
Case
Case
Weight/
Case
pcs
pcs
Size
kg
99013
Bioreactors 3 x 450 / 600
PP
1
6
1/2
2.5
99014
Cryo tubes 81 x 4 / 5 ml
PP
1
10
1/2
2.7
99015
Cryo tubes 81 x 1.2 / 2 ml
PP
1
20
1/2
3.8
99016
Cryo tubes 40 x with star foot
PP
1
12
1/4
1.8
99017
Centrifuge tubes 18 x 15 ml / 10 x 50 ml
PP
1
45
1/2
4.6
PP
1
28
1/2
3.1
PP
1
30
1/2
5.0
Tissue culture tubes 8 x 10 cm / 20 cm
2
99018
99019
2
Centrifuge tubes 30 x 15 ml / 20 x 50 ml
3-B Product "Clean Room"
Type
Product-No.
Version
3-B
TPP standard order number plus prefix 3, triple bagged
389020
TPP standard order number, for ex. 89020 plus prefix 3, 3-B cryo tube 2 ml
390026
TPP standard order number, for ex. 90026 plus prefix 3, 3-B tissue culture flask 25 cm2
391050
TPP standard order number, for ex. 91050 plus prefix 3, 3-B centrifuge tube 50 ml
394005
TPP standard order number, for ex. 94005 plus prefix 3, 3-B serological pipette 5 ml
399250
TPP standard order number, for ex. 99250 plus prefix 3, 3-B vacuum filtration "rapid"-Filtermax 250 ml
Page 31
Page 32
Page 33
Page 34
Page 36
47
TPP Techno Plastic Products AG
Zollstrasse 7
CH-8219 Trasadingen
Tel: +41 (0)52 687 01 87
info@tpp.ch
www.tpp.ch
Version 80950 1-2018
Switzerland
Download PDF