SPECIFICATIONS
Commander Rackmount
PSCR700
PSCR1000
PSCR2000
PSCR3000
PSCR5000
Input
Voltage range
160-270Vac
Frequency
50Hz +/- 10%
Phase
Single phase
Output
Output Voltage
The Commander is value-priced, but delivers features
240 +/- 5% (2 step buck and boost)
Output Voltage Regulation
Nominal Voltage +/- 5% or (optional +/-8% AVR for wide input up to 35%)
you would expect in much higher priced systems such as
Output Voltage Selectable
200Vac or 220Vac or 230Vac or 240Vac
load segment control, hot-swappable battery modules,
Frequency
multiple communication options, high output power
Wave Form - AC Mode
Pure Sine Wave
Wave Form - Battery Mode
Pure Sine Wave
factor and high power density - all in a sleek, modern
package. Like the tower model, it produces a sine wave
output at all times whether working off of battery power
or normal mains. This model has the same LCD display
with Real Time Battery Management that allows the
user to interrogate the UPS from the front panel and tell
how much backup time is available in case of power
features
• Best specifications in its class
• Intelligent real time battery backup display
• Smart 5% AVR with 2 step buck and boost
• Pure sine wave line interactive
loss. Like the tower model, it also comes with the highest
surge rating of any standard UPS with 1558 joules of
surge protection with a 40,000 Amp spike protection and
translates to a faster recharge rate
a narrow 5 % output voltage which ensures that sensitive
• Generator compatible
<3ms
Load Crest Factor
3:1
10A IEC outlets
4
6
6
8
10
15A IEC outlets
0
0
0
0
2
6 X 12 V 7.2 AH
12 X 12 V 7.2 AH
Battery
Battery Type
Number of Batteries
Sealed maintenance free lead acid batteries
3 x 12 V 5 AH
2 X 12 V 7.2 AH
UPS can be started without an AC source
PROTECTION
Surge Protection (Joules)
1581 Joules / 40,000 Amps
Input projection
Compliance with IEEE 587
Fuse
Safety
EN 50091-1-1
Noise Filtering
under-voltage and over-voltage. It supplies regulated
Telephone / Modem / LAN
power to all connected equipment. This UPS is partiicularly
COMMS & MANAGEMENT
well-suited to protecting:
Software
Class B, EN 50091-2, FCC part 15, IEC1000-2-2, C-Tick (Full time EMI-RFI filtering)
RJ45, Full time telephone, modem or LAN protection. C-tick, A-tick
PowerShield UPSilon2000 - Windows, Linux, Novell
Ports
• IT networking equipment, such as routers, switches,
servers, wireless devices, storage systems, security
systems and PC/workstation clusters.
• Telecom equipment such as PBXs, VoIP components
4 X 12 V 7.2 AH
90% within 5 hours
Battery start
Short Circuit
• Highest surge rating - 1558 joules of surge protection
Commander Rackmount resolves outages, sags, surges,
Transfer Time
Recharge Time
• Intelligent double stage charger control which
equipment is getting very close to optimal voltage.
47 Hz – 65 Hz ; 50/60 Hz Auto-sensing
USB & RS232 as standard (Optional - DB9)
SNMP
Optional
AS400 Dry contact
Optional
LCD Display
Audible Alarm
Sophisticated LCD - input voltage, output voltage, frequency, load, battery status, smart remaining backup time
Alarm - on battery, overload, short circuit, over temperature, faulty battery, abnormal operation
CHARACTERISTICS
and wireless networking equipment.
Audible Noise
< 40 dB
• Security equipment such as DVR’s and camera control units
Temperature
0 - 40 oC
• PLCs
Humidity
Weight (Net/Gross)
Width x Height x Depth (mm)
0 - 95% (non-condensing)
14
18
26
40
68
430 x 43.5 (1RU) x 410
440 x 87 (2RU) x 470
440 x 87 (2RU) x 470
440 x 130 (3RU) x 470
440 x 174 (4RU) x 470
Specifications are subject to change without prior notice.
SPECIFICATIONS
Commander Rackmount
PSCR700
PSCR1000
PSCR2000
PSCR3000
PSCR5000
Input
Voltage range
160-270Vac
Frequency
50Hz +/- 10%
Phase
Single phase
Output
Output Voltage
The Commander is value-priced, but delivers features
240 +/- 5% (2 step buck and boost)
Output Voltage Regulation
Nominal Voltage +/- 5% or (optional +/-8% AVR for wide input up to 35%)
you would expect in much higher priced systems such as
Output Voltage Selectable
200Vac or 220Vac or 230Vac or 240Vac
load segment control, hot-swappable battery modules,
Frequency
multiple communication options, high output power
Wave Form - AC Mode
Pure Sine Wave
Wave Form - Battery Mode
Pure Sine Wave
factor and high power density - all in a sleek, modern
package. Like the tower model, it produces a sine wave
output at all times whether working off of battery power
or normal mains. This model has the same LCD display
with Real Time Battery Management that allows the
user to interrogate the UPS from the front panel and tell
how much backup time is available in case of power
features
• Best specifications in its class
• Intelligent real time battery backup display
• Smart 5% AVR with 2 step buck and boost
• Pure sine wave line interactive
loss. Like the tower model, it also comes with the highest
surge rating of any standard UPS with 1558 joules of
surge protection with a 40,000 Amp spike protection and
translates to a faster recharge rate
a narrow 5 % output voltage which ensures that sensitive
• Generator compatible
<3ms
Load Crest Factor
3:1
10A IEC outlets
4
6
6
8
10
15A IEC outlets
0
0
0
0
2
6 X 12 V 7.2 AH
12 X 12 V 7.2 AH
Battery
Battery Type
Sealed maintenance free lead acid batteries
Number of Batteries
3 x 12 V 5 AH
2 X 12 V 7.2 AH
UPS can be started without an AC source
PROTECTION
Surge Protection (Joules)
1581 Joules / 40,000 Amps
Input projection
Compliance with IEEE 587
Fuse
Safety
EN 50091-1-1
Noise Filtering
Class B, EN 50091-2, FCC part 15, IEC1000-2-2, C-Tick (Full time EMI-RFI filtering)
under-voltage and over-voltage. It supplies regulated
Telephone / Modem / LAN
power to all connected equipment. This UPS is partiicularly
COMMS & MANAGEMENT
well-suited to protecting:
Software
RJ45, Full time telephone, modem or LAN protection. C-tick, A-tick
PowerShield UPSilon2000 - Windows, Linux, Novell
Ports
• IT networking equipment, such as routers, switches,
servers, wireless devices, storage systems, security
systems and PC/workstation clusters.
• Telecom equipment such as PBXs, VoIP components
4 X 12 V 7.2 AH
90% within 5 hours
Battery start
Short Circuit
• Highest surge rating - 1558 joules of surge protection
Commander Rackmount resolves outages, sags, surges,
Transfer Time
Recharge Time
• Intelligent double stage charger control which
equipment is getting very close to optimal voltage.
47 Hz – 65 Hz ; 50/60 Hz Auto-sensing
USB & RS232 as standard (Optional - DB9)
SNMP
Optional
AS400 Dry contact
Optional
LCD Display
Sophisticated LCD - input voltage, output voltage, frequency, load, battery status, smart remaining backup time
Audible Alarm
Alarm - on battery, overload, short circuit, over temperature, faulty battery, abnormal operation
CHARACTERISTICS
and wireless networking equipment.
Audible Noise
< 40 dB
• Security equipment such as DVR’s and camera control units
Temperature
0 - 40 oC
• PLCs
Humidity
0 - 95% (non-condensing)
Weight (Net/Gross)
Width x Height x Depth (mm)
14
18
26
40
68
430 x 43.5 (1RU) x 410
440 x 87 (2RU) x 470
440 x 87 (2RU) x 470
440 x 130 (3RU) x 470
440 x 174 (4RU) x 470
Specifications are subject to change without prior notice.
Powerhouse Systems Pty Ltd
Powerhouse
Powerhouse Systems Pty Ltd
Brisbane P: +61Brisbane
7 3846 2644
F: + 61 7 3846 F:
2346
E: sales@powerhousesystems.com.au
SystemsPowerhouse
P: +61 7 3846 2644 R&D
+ Technology
61 7 3846 2346
sales@rdtechnology.com.au
Pty Ltd E:
Specialised
Engineering Products
Systems
an R&D Technology
Group Company
an R&D Technology
Group Company
website:
www.powerhousesystems.com.au
website:
www.powerhousesystems.com.au
Newcastle
P: +61 2 4014 9000 F: + 612 4014 9099
Brisbane
P: +61 7 3846 2644
F: + 61 7 3846 2346
Wollongong P: +61 2 4285 9978 F: + 61 2 4285 9989
R&D Technology
Pty LtdPty
Specialised
Engineering
Products
R&D Technology
Ltd Specialised
Engineering
Products
Gloucester
P: +61 2 6558 2986
F: + 61 2 4014 9099
Newcastle Newcastle
P: +61 2 4014
9000
F: +9000
61 2 4014
9099
Gloucester
P:Regional
+61 P:
2 6558
F: + 61
4014
9099
P: +61
2 4014
F: + 61
2 4014 9099
Gloucester
+61
2 2986
6558 2986
F: +2 61
2 4014
9099
QLD P: +61 7 4952 3833 F: + 61 2 4014 9099
P: +61
2 4285
F: + 61
2 4285 9989
Regional
+61 7 3833
4952 3833
F: +2 61
2 4014
9099
WollongongWollongong
P: +61 2 4285
9978
F: +9978
61 2 4285
9989
Regional
QLD QLD
P: +61 P:
7 4952
+ 61
4014
9099
E: F:
sales@rdtechnology.com.au
website:
www.rdtechnology.com.au
E: sales@rdtechnology.com.au
website:
www.rdtechnology.com.au
E: sales@rdtechnology.com.au
website:
www.rdtechnology.com.au