3M™ Pro Reverse Osmosis Drinking Water System
APPLICATION: Superior Reverse Osmosis Drinking Water1
Drinking and hydration • Hot and cold beverages • Cooking and food preparation • Pet hydration • Aquatic aquariums
The 3M™ Pro Reverse Osmosis Drinking Water Filtration System helps provide cleaner, better tasting water through reverse osmosis filtration. The 3MRO501 offers multistage filtration, incorporating separate sediment and chlorine taste & odor filters for
excellent membrane module protection, a sanitary, encapsulated reverse osmosis
membrane, a carbon block post-filter for superior flow from a dedicated faucet and a
high-pressure booster pump for increased and more consistent production.
The 3M system’s 110 VAC booster pump delivers a consistent driving pressure of
100 psi regardless of the regular feed pressure coming into a home, dramatically
increasing production levels with the ability to deliver up to 36.78 gallons of clean,
great-tasting water per day.†
PRODUCT BENEFITS:
MODEL: 3MRO501
PRODUCT SPECIFICATIONS:
• Reduces Sediment, Chlorine Taste & Odor, Cysts, Arsenic, Barium, Cadmium, Chromium (Hex),
Chromium (Tri), Copper, Fluoride, Lead, Radium, Selenium, select Volatile Organic Compounds
(VOCs), Nitrates, Turbidity and Total Dissolved Solids (TDS)*.
• System includes compact booster pump design, which can be installed centrally in a home
with lines run to multiple faucets and appliances.
• Electronic pressure switch provides more water in the storage tank at a higher delivery
pressure than traditional, non booster pump systems.
• Installs under the sink for dedicated drinking and cooking water use.
• 5 micron sediment/carbon pre-filter for optimal sediment holding capacity.
• Reverse osmosis membrane module capable of producing up to 36.78 gallons (139.23
liters) per day of clean, fresh water every 24 hours.†
• 10 micron nominal carbon block post-filter to provide satisfying flow from faucet.
• Sanitary quick change (SQC) design, allows for fast and easy, 1/4 turn replacement filter
change-outs without the need of a filter wrench.
• System designed for both chlorinated and non-chlorinated municipal or well systems.
• Helps conserve water (compared to systems without an auto shut off), shutting system
down when storage tank is full and automatically turns on to refill tank.
Model/Part
Number
Reduction
Claims
Dimensions
(H x W x D)
Approx.
Weight
Daily
Production
Rate†
Service
Flow Rate
Temperature
Range
Pressure
Range
Replacement
Filters
3MRO501
Sediment, Chlorine Taste & Odor,
Cysts, Arsenic, Barium, Cadmium,
Chromium (Hex), Chromium (Tri),
Copper, Fluoride, Lead, Radium,
Selenium, Select VOCs (Carbofuran,
Toxaphene, p-Dichlorobenzene and
o-Dichlorobenzene), Nitrates, Turbidity and Total Dissolved Solids (TDS).*
16.1” x 10.9” x 7.3”
(40.9 cm x 27.7 cm x 18.5 cm)
11.5 lbs
(5.2 kg)
36.78 gpd
(139.23 lpd)
0.6 gpm
(2.3 lpm)
40 - 100°F
(4.4 - 37.8°C)
40 - 100 psi
(276- 689 kPa)
3MROP411
3MROP412
3MROM413
3MROP416
1
Compared to the 3MRO401 reverse osmosis system, which produces up to 18.95 gpd.
* See Performance Data Sheet for additional details.
† Nominal production rate of membrane when running to atmosphere (i.e., with empty tank) at 77° F and 50 PSI is 36.78 gpd (139.23 lpd). Production varies based on pressure (fullness) of storage tank.
To obtain additional information please call our Customer Care team at 855-3M-WATER or visit our
website at www.3MWater.com
Model: 3MRO501
INSTALLATION DIFFICULTY
Skills Needed: (Please refer to installation difficulty chart on website
for additional information)
SPECIFICATIONS
• System includes a tank, faucet, sediment filter, granulated carbon filter, membrane
module and a carbon block post-filter.
• System maximum operating pressure of 100 psi (689 kPa) and operating temperature
of 100°F (37.8°C).
• Daily production rate up to 36.78 gpd (139.23 lpd)†, service flow rate of 0.6 gpm (2.3 lpm).
• System is NSF Standards 42, 53 and 58 certified*.
• Replacement filters are sanitary in design, requiring no contact with the filter media
during filter change-out.
• System Efficiency: 13.06% Efficiency rating means the percentage of the influent water
to the system that is available to the user as reverse osmosis treated water under
operating conditions that approximate typical daily usage.
• Professional installation recommended.
10.94"
(27.7 cm)
IMPORTANT
13.19"
(33.5 cm)
WARNING: To reduce the risk associated with the ingestion of contaminants:
• Do not use with water that is microbiologically unsafe or of unknown quality without
adequate disinfection before or after the system. Systems certified for cyst reduction
may be used on disinfected water that may contain filterable cysts. EPA Establishment
# 070595-CT-001
NOTICE: To reduce the risk associated with property damage due to water leakage or
flooding:
• Read and follow all Instructions before installation and use of this system.
• Do not install if water pressure exceeds 100 psi (690 kPa). If your water pressure
exceeds 80 psi (552 kPa), you must install a pressure limiting valve. Contact a plumbing
professional if you are uncertain how to check your water pressure.
To reduce the risk of water leakage of flooding, and to ensure optimal filter performance:
• Change the disposable filter cartridge every 12 months or sooner if you observe a noticeable reduction in water flow rate.
• Change the disposable filter membrane every 36 months or sooner if you observe a
noticeable reduction in water flow rate.
• Failure to replace the disposable filter cartridge at recommended intervals may lead to reduced filter performance and cracks in the filter housing, causing water leakage or flooding.
• For questions or concerns, please contact Customer Service at 1-855-3M-WATER.
3M Purification Inc. recommends regularly scheduled maintenance and replacement
of the filters in order for the product to perform as advertised. 3M Purification Inc.
shall not be liable for system failures due to improper maintenance.
7.31"
(18.5 cm)
16.13"
(40.9 cm)
2" MINIMUM
DISTANCE REQUIRED
TO REMOVE CARTRIDGE
1
Compared to the 3MRO401 reverse osmosis system, which produces up to 18.95 gpd.
* See Performance Data Sheet for additional details.
† Nominal production rate of membrane when running to atmosphere (i.e., with empty
tank) at 77° F and 50 PSI is 36.78 gpd (139.23 lpd). Production varies based on pressure
(fullness) of storage tank.
LIMITED WARRANTY
3M Innovation
Inventing Tomorrow
Innovation—the art and science of applying creativity to develop practical and novel
solutions—has been our hallmark for more than a century. It’s more than a way of
developing products. Innovation is part of our DNA. At 3M Purification, we apply that
spirit of innovation through every day conveniences that improve your style of life.
3M Purification Inc. warrants this Product will be free from defects in material and manufacture for the following periods from the date of purchase: Twelve (12) year for the Product, except
for the booster pump and electronics, which are warranted for two (2) years, and the replacement filter cartridges and membrane, which are warranted for one (1) year. This warranty does not
cover failures resulting from abuse, misuse, alteration or damage not caused by 3M Purification Inc. or failure to follow installation and use instructions. No warranty is given as to the service
life of any filter cartridge or membrane as it will vary with local water conditions and water consumption. 3M PURIFICATION INC. MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED
WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOMER OR USAGE OF TRADE. If the Product fails to satisfy this Limited Warranty during the warranty period,
3M Purification Inc. will replace the Product or refund your Product purchase price. This warranty does not cover labor. The remedy stated in this paragraph is Customer’s sole remedy and
3M Purification Inc.’s exclusive obligation. For additional information, see the entire Limited Warranty located in the product Installation and Operating Instruction Manual.
Limitation of Liability. 3M Purification Inc. will not be liable for any loss or damage arising from this 3M Purification Inc. product, whether direct, indirect, special, incidental, or
consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. Some states and countries do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
System tested and certified by NSF International against
NSF/ANSI Standard 42, 53 and 58 for the reduction of
claims specified on the Performance Data Sheet.
3M is a trademark of 3M Company.
© 2014 3M Company. All rights reserved.
70020295377 REV 0314
Available exclusively through your 3M Authorized Water Dealer
3M Purifictation Inc.
400 Research Parkway
Meriden, CT 06450
855-3M-WATER (855-369-2837)
www.3MWater.com
Download PDF

advertising