MANUAL
ENGLISH
PM-One
Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands
V1
Ordercode: D6181
PM-One
Table of contents
Warning ...............................................................................................................................................................................2
Safety Instructions ......................................................................................................................................................2
Operating Determinations .......................................................................................................................................3
Connection with the mains .....................................................................................................................................3
Return Procedure ......................................................................................................................................................4
Claims ..........................................................................................................................................................................4
Description of the device.................................................................................................................................................5
Frontside ......................................................................................................................................................................5
Backside ......................................................................................................................................................................6
Installation ...........................................................................................................................................................................7
Set Up and Operation .......................................................................................................................................................7
Connecting the PM-One to the ZPA-6240TU 100V Amplifier.............................................................................7
Data Cabling .............................................................................................................................................................7
How to make a data cable ....................................................................................................................................8
Maintenance ......................................................................................................................................................................8
Troubleshooting .................................................................................................................................................................8
Product Specifications ......................................................................................................................................................9
Ordercode: D6181
1
PM-One
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a device must be
returned to the factory, it is important that the device is returned in the original factory box and packing.
Your shipment includes:
•
•
DAP Audio PM-One
User manual
Safety Instructions
Every person involved with the installation, operation and maintenance of this system has to:
•
be qualified
•
follow the instructions of this manual
Before the initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the system.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the system are not subject to
warranty.
This system contains no user-serviceable parts. Refer servicing to qualified technicians only.
Ordercode: D6181
2
PM-One
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Never remove warning or informative labels from the unit.
Never leave any cables lying around.
Do not open the device and do not modify the device.
Do not connect this device to a dimmerpack.
Do not switch the system on and off in short intervals, as this would reduce the system’s life.
Only use device indoors, avoid contact with water or other liquids.
Avoid flames and do not put close to flammable liquids or gases.
Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power cord by the plug. Never pull out the plug by tugging the power cord.
Make sure you do not use the wrong kind of cables or defective cables.
Make sure that the power cord is never crimped or damaged. Check the system and the power
cord from time to time.
If system is dropped or struck, disconnect the power supply immediately. Have a qualified engineer
inspect for safety before operating.
If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your system. Leave the
system switched off until it has reached room temperature.
If your Dap Audio device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Dap Audio dealer for service.
Repairs, servicing and electric connection must be carried out by a qualified technician.
WARRANTY: Till one year after date of purchase.
Operating Determinations
•
•
•
•
•
This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
The maximum ambient temperature t a = 40°C must never be exceeded.
The relative humidity must not exceed 50 % with an ambient temperature of 40° C.
If this device is operated in any other way, than the one described in this manual, the product may
suffer damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc.
You endanger your own safety and the safety of others!
Connection with the mains
Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.
International
L
N
EU Cable
BROWN
BLUE
YELLOW/GREEN
UK Cable
RED
BLACK
GREEN
US Cable
YELLOW/COPPER
SILVER
GREEN
Pin
PHASE
NEUTRAL
PROTECTIVE GROUND
Make sure that the device is always connected properly to the earth!
Improper installation can cause serious damage to people and property!
Ordercode: D6181
3
PM-One
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.
Be prepared to provide the model number, serial number and a brief description of the cause for the
return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the
customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
01) Your name
02) Your address
03) Your phone number
04) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any shortcomings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
otherwise agreed in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of the
invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement of which the obligation is resulting.
Ordercode: D6181
4
PM-One
Description of the device
The Dap Audio PM-One is a desktop microphone, designed especially for the ZPA-6240TU amplifier
(D6180). It is equipped with a push-to-talk button, along with a LED indicator, and can be set as a
master/slave in a chain of microphones. The power is supplied by the ZPA-6240TU, so there is no need for
any external power supply. Maximum cable length is limited due to analog signal transmission.
Features
•
•
•
•
•
•
•
•
Microphone unit: condenser
Frequency response: 22 Hz – 23 KHz
Sensitivity: 29 dB @ 1 KHz
Audio output: 230 mV
Connections: 2 x RJ45
Dimensions (base): 164 x 150 x 55 mm (LxWxH)
Dimensions (microphone): 20 x 435 mm (WxH)
Weight: 0,7 kg
Optional accessories
D6180 – ZPA-6240TU, 6-zone 100V amplifier
Frontside
Fig. 01
Goose neck + microphone head
Adjust the height of microphone head and the distance between your mouth and the microphone.
The distance should not be bigger than 30 cm. Otherwise, sound transmission may be affected.
Ordercode: D6181
5
PM-One
Talk button
If you use a single PM-One, and Chime mode is active, press this button and wait until the chime
sound passes, and then talk. When Chime mode is inactive, always press this button to talk.
If you use multiple devices and the master/slave switch (04) is set to MASTER position, press this
button to talk. If the master/slave switch (04) is set to SLAVE position and the BUSY LED indicator
blinks, it means that the line is busy and you need to wait until the LED indicator stops blinking.
Backside
Fig. 02
Chime/Priority switch
Move the CHIME switch to ON/OFF positions to activate/deactivate chime sound.
Move the PRIORITY switch to ON position (the PM-One receives the highest priority) or to OFF position
(the priority for the PM-One will be determined by the host).
Master/Slave switch
If you connect multiple devices, and the switch is set to MASTER position, you have priority to speak.
If the switch is set to SLAVE position, you need to wait until the BUSY LED indicator stops blinking.
Microphone RJ45 - OUT
Use this connector to connect the PM-One to another PM’s LINK connector or to the input connector
on the ZPA-6240TU.
Microphone RJ45 - LINK
Use this connector to connect two or more devices. Connect the OUTPUT connector on the master
device to the LINK connector on the slave device, etc.
Ordercode: D6181
6
PM-One
Installation
Remove all packing materials from the PM-One. Check if all foam and plastic padding is removed.
Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Connecting the PM-One to the ZPA-6240TU 100V Amplifier
Fig. 03
Data Cabling
To link fixtures together, you must obtain data cables. You can purchase DAP Audio certified DMX cables
directly from a dealer/distributor or construct your own cable. If you choose to create your own cable,
please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic
interference.
DAP Audio PC Interface Cables
•
CAT-5 cable 7,6 mm Matte blue PVC. Ordercode FL55150 (1,5 m), FL553 (3 m), FL556 (6 m),
FL5510 (10 m), FL5515 (15 m), FL5520 (20 m).
•
CAT-6 cable (recommended for best data transfer). Ordercode FL563 (3 m), FL566 (6 m),
FL5610 (10 m), FL5615 (15 m), FL5640 (40 m).
Ordercode: D6181
7
PM-One
How to make a data cable
A standard ETHERNET cable can be used to replace the data cable required to transmit the data for the
PM-One.
Please follow the instructions below in order to create an extra Net Cable.
Take a standard net cable (CAT-5/ 5E /6) and connect it to the RJ45 connector, as shown in the picture
below (fig. 04). The wires should now be colored as follows:
Fig. 04
Maintenance
The DAP Audio PM-One requires almost no maintenance. However, you should keep the unit clean.
Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in
liquid. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp
cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Troubleshooting
DAP Audio PM-One
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
01) If the device does not operate properly, unplug the device.
02) Check power from the wall, all cables, connections, etc.
03) If all of the above appears to be O.K., plug the unit in again.
04) If nothing happens after 30 seconds, unplug the device.
05) Return the device to your DAP Audio dealer.
Ordercode: D6181
8
PM-One
Product Specifications
Model:
Dimensions (base):
Dimensions (microphone):
Weight:
DAP Audio PM-One
164 x 150 x 55 mm (LxWxH)
20 x 435 mm (WxH)
0,7 kg
Operating and Programming:
Signal link:
Signal output:
RJ45 IN
RJ45 OUT
Electro-mechanical effects:
Microphone unit:
Frequency response:
Sensitivity:
Audio output:
condenser
22 Hz – 23 KHz
29 dB @ 1 KHz
230 mV
Max. ambient temperature t a :
Max. housing temperature t B :
40°C
80°C
Design and product specifications are subject to change without prior notice.
Website: www.Dap-audio.info
Email: service@highlite.nl
Ordercode: D6181
9
PM-One
Ordercode: D6181
10
©2016 DAP Audio
Download PDF