W2620 fisher-price.com

Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
Requires three “AA” batteries (included) for monkey
toy operation.
Batteries included are for demonstration purposes only.
Tools required for battery replacement: Phillips
screwdriver (not included).
One-Time Assembly
Elephant Mirror
Palm Tree
• Fit the tab on the end of the bee into the
Zebra Bolster
socket in the elephant mirror. Push to
"snap" in place.
2 Supports
Cross Brace
Elephant Mirror
• Place the quilt, print side up, on a flat surface.
• Slide a support through each sleeve in the
quilt, as shown.
5 Hanging Toys
Cross Brace
Monkey Toy
• While pressing the button on the end of
each support, fit them into the openings
on the cross brace. Make sure you hear
a "click".
Monkey Toy
• Fit the end of the strap on the quilt into
the slot on the cross brace.
• Fit the monkey toy and elephant mirror
onto the posts.
Hint: These toys are designed to fit onto the
posts one way. If a toy does not seem to fit,
try the other post.
Zebra Bolster
• Attach the zebra bolster to the palm tree
(or the giraffe).
• Attach the hanging toys to the loops
around the gym.
• Fit the giraffe and palm tree into the
sockets in the cross brace.
Consumer Information
FCC Statement (United States Only)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there
is no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced radio/
TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
Mattel Europa B.V., Gondel 1, 1186MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
• Machine wash the quilt and zebra bolster
in cold water on the gentle cycle. Do not
use bleach. Tumble dry on low heat.
• Surface wash all other parts of this toy
with a mild cleaning solution and damp
cloth. Do not use bleach. Do not immerse
the monkey toy. Rinse clean to
remove residue.
This Class B digital apparatus complies
with Canadian ICES-003.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
Cet appareil numérique de la classe
B est conforme à la norme NMB-003
du Canada. L’utilisation de ce dispositif
est autorisée seulement aux conditions
suivantes: (1) il ne doit pas produire de
brouillage et (2) l’utilisateur du dispositif
doit être prêt à accepter tout brouillage
radioélectrique reçu, même si ce brouillage
est susceptible de compromettre le
fonctionnement du dispositif.
©2012 Mattel. All Rights Reserved.
Battery Replacement
Battery Safety
In exceptional circumstances, batteries
may leak fluids that can cause a chemical
burn injury or ruin yourproduct. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
1,5V x 3
“AA” (LR6)
For best performance, we recommend
replacing the batteries that came with
this toy with three new "AA" (LR6)
alkaline batteries.
• Loosen the screws in the battery
compartment toy. Remove the door.
• Remove the exhausted batteries and
dispose of them properly.
• Insert three, new "AA" (LR6)
alkaline batteries.
• Replace the battery compartment
door and tighten the screws. Do not
• If this toy begins to operate erratically,
you may need to reset the electronics.
Slide the power/volume switch off and
then back on.
• When sounds or lights become faint or
stop, it's time for an adult to change
the batteries.
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities.
Lively Music!
To prevent entanglement
injury, never place gym in
a crib or playpen. Never add
strings, ties or other products
to the gym.
• When you are finished playing with this toy,
• Slide the power/volume switch on the monkey
slide the power/volume switch OFF
or ON with
toy to ON with low volume
high volume
• Slide the mode switch to short play or
long play.
Short Play - Spin the roller for lights
and a short ditty.
Long Play - Spin the roller for
approximately 20 minutes of music.
• Press the button on the side of the elephant
and the back of the monkey to remove from
the posts.
Download PDF