PRODUCT GUIDE 2011
Issue 7
Providing support for all your catering equipment needs
PRICE LIST – 2011
Supplying the highest quality
equipment to the catering industry
Maidaid Halcyon® was founded in the early seventies and specialises
in cost effective, durable solutions for the catering industry.
The wealth of experience gained over the years has established the
Maidaid Halcyon® range as leaders within the industry. Our machines
have a long standing reputation for durability and reliability.
Maidaid Halcyon® products are constructed from the highest quality
materials to ensure many years of commercial service. We produce
a tough machine to do a tough job.
Whether you want simple reliability or the very latest innovations in
micro-processing, there is a Maidaid Halcyon® machine for you.
What is more, we actually listen to our distributors to help us provide
what is, undoubtedly, the best service in the business.
That’s why, in this Product Guide you will find every product is
shown, together with its price, dimensions and relevant ancillary
products all on one page.
You can also request the brochure in PDF format.
It has never been easier to select and order your Maidaid
Halcyon® equipment.
2
Maidaid Halcyon® offices are located in an historic
Victorian engine shed with a purpose built
25,000 sq ft warehouse at the same location.
Contents
Glasswashers
Icemakers
C Range – Electro Mechanical
4
Icemakers
32
D Range – Electronic
5
Modular Ice Cube Makers
33
Evolution Range – Under Counter
6
Pebble Icemakers
34
Granular Icemakers
35
Modular Granular & Flat Icemakers
36
Modular Storage Bins
37
Dishwashers
C Range – Under Counter
7
D Range – Under Counter
8
Evolution Range – Under Counter
9
Bottle Coolers
C Range – Pass Through
10
Single Door
38
D Range – Pass Through
11
Double Door
38-39
Evolution Range – Pass Through
12
MH Range – Heavy Duty
13
Bezzera Espresso Coffee Machines
MH Range – Heavy Duty Pass Through
14
BZ Range
Dishwasher Ancillary Products
40-41
Giulia & Galatea Domus Ranges
42
Bistro Compact Range
43
C Range, D Range and Evolution Range –
Pass Through Tabling
Bistro Range
44
15
Ellisse Range
45
MH Range – Pass Through Tabling
16
Eagle Range
46
Galatea
47
Grinders/Dispensers & Espressopot Coffee
48
Additional Items
49
Water Softeners
50
Baskets and Stands
51
Warewashing Chemical Supplies
52
Stainless Steel Fabrication
53
On Site Commissioning
and Staff Training
54
Minirack
Minirack – Single Tank Dishwashers
17
Minirack – Dual Tank Dishwashers
18
Minirack – Tabling
19
Rack Conveyors
Rack Conveyors
Rack Conveyor Accessories
Rack Conveyor – Tabling
Flight Machines
20-25
26
27-28
29
Utensil/Pot Washers
Utensil/Pot Washers
30
Granular Pot Washer
31
3
C RANGE – ELECTRO MECHANICAL GLASSWASHERS
GENERAL FEATURES
■
■
■
■
■
■
■
TECHNICAL FEATURES
2 year warranty
Reliable electro mechanical components and simple controls
for long life
Includes rinse aid and detergent dispensers
Supplied with 2 glass racks (1 glass & 1 plate rack on C500 if required)
Fitted drain pump option or as a kit
Superbly designed wash and rinse arms
to provide exceptional results
Self cleaning jets
■
■
■
■
Voltage 240V – single phase
Water supply pressure – minimum 2 atm / maximum 4 atm
Wash tank temperature – 55°C
Rinse boiler temperature – 85ºC
C500
C450
C400
C350
Model
C350
C350D
C400
C400D
C450
C450D
C500
C500D
Rack size
mm
350 x 350
Useable
Height mm
190
390 x 390
250
450 x 450
260
500 x 500
300
Dimensions mm
Cycle Time
WxDxH
Sec
400 x 475 x 580
150
Inclusive of fitted drain pump
435 x 525 x 655
150
Inclusive of fitted drain pump
525 x 560 x 700
150
Inclusive of fitted drain pump
575 x 600 x 820
90-120
Inclusive of fitted drain pump
Power
kW
2.85
Amps
Required
13
2.85
13
3
13
2.7/4.7/6.7
13/20/30
Price
£
1,270
1,410
1,590
1,730
2,035
2,225
2,470
2,660
Ancillaries
Item
Water Softener (manual)
Water Softener (automatic)
Booster Pump
Universal Stand
(Fits all machines)
Racks – Wire
Racks – Plastic
Breaktanks
(class “A” air gap)
Racking System
Chemicals
4
Variants
8 litre
12 litre
Cold water
Hot water
Pump for low rinse water pressure or to connect machine to conventional
hot water supply (not exceeding 50°C)
520mm high adjustable stand
520mm high adjustable stand – stainless steel
520mm high adjustable stand – chrome
Glass/cup rack for C350
Glass/cup rack for C400
Glass/cup rack for C450
Glass/cup rack for C500
Glass/cup rack for C350
Glass/cup rack for C400
Glass/cup rack for C450
Glass/cup rack for C500
Breaktank with rinse booster pump (external freestanding)
Breaktank without rinse booster pump (external freestanding)
Mobile three tier racking system for C400
Mobile three tier racking system for C450
Mobile three tier racking system for C500
For original Maidaid® chemicals see page 52
Part No.
Price £
Q900008
98
Q900012
110
Q900100
545
Q900104
845
Q904001 (Brass Head)
245
Q904002 (Cast Iron Head)
125
Q902100
55
Q902101
115
Q902104
75
Q902000
35
Q902003
39
Q902005
44
Q902007
48
Q902302
35
Q902303
35
Q902300
35
Z972001
36
Q904101
645
Q904100
495
Q902220
320
Q902226
325
Q902221
345
D RANGE – ELECTRONIC GLASSWASHERS
GENERAL FEATURES
■
■
■
■
■
■
■
■
■
■
TECHNICAL FEATURES
2 year warranty
Soft touch controls, twin digital temperature displays
Built-in detergent and rinse aid dispensers
Selectable thermostop for guaranteed temperatures
Selectable energy saving option
Moulded easy clean washtank
Supplied with 2 glass racks (1 glass & 1 plate rack on D500 if required)
Fitted drain pump option or as a kit
D500 includes the unique
Renovator cycle for
use with Maidaid®
liquid glass renovator
to bring glasses to
their sparkling best
■
Voltage 240V – single phase
■
Voltage 415V – 3 phase option available on D500
■
Water supply pressure – minimum 2 atm / maximum 4 atm
■
Wash tank temperature – 55°C (adjustable)
■
Rinse boiler temperature – 85°C (adjustable)
D500 and D500WS
supplied with
set of surface
tray filters
D500
D450
D400
D350
Model
D350
D350D
D400
D400D
D450
D450D
D500
D500D
D500WS
D500WSD
Rack size
mm
350 x 350
Useable
Height mm
250
390 x 390
290
450 x 450
260
500 x 500
300
Dimensions mm
Cycle Time
Power
WxDxH
Sec
kW
400 x 475 x 625
150
2.8
Inclusive of fitted drain pump
435 x 530 x 670
150
2.9
Inclusive of fitted drain pump
525 x 560 x 695
150
3
Inclusive of fitted drain pump
575 x 610 x 815..
60-120-180
2.6/4.6/6.6
Inclusive of fitted drain pump
Inclusive of built in water softener
Inclusive of built in water softener and drain pump
Amps
Required
13
13
13
13/20/30
Price
£
1,480
1,620
1,915
2,055
2,470
2,656
2,980
3,175
3,215
3,405
Ancillaries
Item
Water Softener (manual)
Water Softener (automatic)
Booster Pump
Universal Stand
(Fits all machines)
Racks – Wire
Racks – Plastic
Breaktanks
(class “A” air gap)
Racking System
Chemicals
Variants
8 litre
12 litre
Cold water
Hot water
Pump for low rinse water pressure or to connect machine to conventional
hot water supply (not exceeding 50°C)
520mm high adjustable stand
520mm high adjustable stand – stainless steel
520mm high adjustable stand – chrome
Glass/cup rack for D350
Glass/cup rack for D400
Glass/cup rack for D450
Glass/cup rack for D500
Glass/cup rack for D350
Glass/cup rack for D400
Glass/cup rack for D450
Glass/cup rack for D500
Breaktank with rinse booster pump (external freestanding)
Breaktank without rinse booster pump (external freestanding)
Mobile three tier racking system for D400
Mobile three tier racking system for D450
Mobile three tier racking system for D500
For original Maidaid® chemicals see page 52
Part No.
Price £
98
Q900008
110
Q900012
545
Q900100
845
Q900104
245
Q904001 (Brass Head)
125
Q904002 (Cast Iron Head)
55
Q902100
115
Q902101
75
Q902104
35
Q902000
39
Q902003
44
Q902005
48
Q902007
35
Q902302
35
Q902303
35
Q902300
36
Z972001
645
Q904101
495
Q904100
320
Q902220
325
Q902226
345
Q902221
5
EVOLUTION RANGE –
UNDER COUNTER GLASSWASHERS
GENERAL FEATURES
■
■
■
■
■
■
■
2 year warranty
Designed to minimise
energy usage
Low water consumption
All machines double
skinned
Simple soft touch
control,
digital display
Automatic cycle self
cleaning at drain down
■
■
■
■
Selectable quick start and
energy saving option
Selectable thermostop for
guaranteed rinse
temperature
Superior peristaltic
dosing for both detergent
and rinse aid
Chemical priming and
dose control from the
control panel
Three programmable
cycle times
■
■
■
■
■
Evolution 400
Model
Evolution 400
Evolution 400WS
Evolution 500
Evolution 500WS
Evolution 510
Evolution 510WS
Fully moulded wash tank
MWT – Maidaid® Wash
Technology – 10% improvement
in wash results
MRT – Maidaid® Rinse
Technology – Constant rinse
performance
MDT – Maidaid® Drain
Technology – Drain pump as
standard
MCS – Maidaid® Continuous
Softener (on 400WS, 500WS
and 510WS models)
TECHNICAL FEATURES
■
■
■
■
■
Voltage 240V – Single phase
Voltage 415V – Three phase option available
(except Evo 400)
Water supply pressure – minimum 2
atm/maximum 4 atm – Water softener
versions minimum 2.5 atm
Wash tank temperature – 55º C (adjustable)
Rinse boiler temperature – 85º C (adjustable)
CERTIFICATION
■
WRAS
Evolution 500
Rack size
mm
400 x 400
400 x 400
500 x 500
500 x 500
500 x 500
500 x 500
Useable
Height mm
280
280
265
265
360
360
Dimensions mm
WxDxH
465 x 555 x 700
465 x 555 x 700
600 x 600 x 720
600 x 600 x 720
600 x 600 x 820
600 x 600 x 820
Cycle Time
Sec
90-120 Adjustable + full clean
90-120 Adjustable + full clean
90-120 Adjustable
90-120 Adjustable
90-120-180 Adjustable
60-120-180 Adjustable
Evolution 510
Power
kW
2.8
2.8
2.6/4.6/6
2.6/4.6/6
2.6/4.6/6.6
2.6/4.6/6.6
Amps
Required
13
13
13/20/30
13/20/30
13/20/30
13/20/30
Price
£
2,890
3,190
3,040
3,310
3,755
4,075
Ancillaries
Item
Water Softener (manual)
Water Softener (automatic)
Booster Pump
Universal Stand
(Fits all machines)
Racks – Wire
Racks – Plastic
Breaktanks
(class “A” air gap)
Racking System
Chemicals
6
Variants
8 litre
12 litre
Cold water
Hot water
Pump for low rinse water pressure or to connect machine to conventional
hot water supply (not exceeding 50°C)
520mm high adjustable stand
520mm high adjustable stand – stainless steel
520mm high adjustable stand – chrome
Glass/cup rack
Plate rack
Glass/cup rack
Plate rack
Internally fitted as standard to 510 models
Breaktank with rinse booster pump (external freestanding)
Breaktank without rinse booster pump (external freestanding)
Mobile three tier racking system for models 500 and 510
For original Maidaid® chemicals see page 52
Part No.
Price £
Q900008
98
Q900012
110
Q900100
545
Q900104
845
Q904001 (Brass Head)
245
Q904002 (Cast Iron Head)
125
Q902100
55
Q902101
115
Q902104
75
Q902007
48
Q902012
48
Z972001
36
Z972003
36
Q904101
Q904100
Q902221
645
495
345
C RANGE – UNDER COUNTER DISHWASHERS
GENERAL FEATURES
CERTIFICATION
■
2 year warranty
■
Built-in detergent and rinse aid dispensers
■
Electro-mechanical components and simple controls
■
C510 supplied with 1 glass/cup & 1 plate rack
■
Up to 400 plates per hour
■
Fitted drain pump option
■
Fitted breaktank (type “A” air gap) on C510 models
■
WRAS on C510 and C510D
TECHNICAL FEATURES
■
Voltage 240V – single phase
■
Water supply pressure – minimum 2 atm / maximum 4 atm
■
Wash tank temperature – 55°C
■
Rinse boiler temperature – 85°C
C500
C510
Model
C500
C500D
C510
C510D
Rack size
mm
500 x 500
Useable
Height mm
300
500 x 500
300
Dimensions mm
Cycle Time
WxDxH
Sec
575 x 600 x 820
90-120
Inclusive of fitted drain pump
575 x 625 x 820
90-120
Inclusive of fitted drain pump
Power
kW
2.7/4.7/6.7
Amps
Required
13/20/30
2.7/4.7/6.7
13/20/30
Price
£
2,470
2,660
2,795
2,990
Ancillaries
Item
Water Softener (manual)
Water Softener (automatic)
Booster Pump
Universal Stand
(Fits all machines)
Racks – Wire
Racks – Plastic
Breaktanks
(class “A” air gap)
Racking System
Chemicals
Variants
12 litre
16 litre
Cold water
Hot water
Pump for low rinse water pressure or to connect machine to conventional
hot water supply (not exceeding 50°C)
520mm high adjustable stand
520mm high adjustable stand – stainless steel
520mm high adjustable stand – chrome
Glass/cup rack
Plate rack
Cutlery rack
Large saucer rack
Glass/cup rack
Plate rack
Round cutlery insert
Compartment racks
(Internally fitted as standard to C510)
Breaktank with rinse booster pump (external freestanding)
Breaktank without rinse booster pump (external freestanding)
Mobile three tier racking system
For original Maidaid® chemicals see page 52
Part No.
Price £
Q900012
110
Q900016
149
Q900100
545
Q900104
845
Q904001 (Brass Head)
245
Q904002 (Cast Iron Head)
125
Q902100
55
Q902101
115
Q902104
75
Q902007
48
Q902012
48
Z970074
65
Q902008
17
Z972001
36
Z972003
36
Z976011
5
Various
P.O.A.
Q904101
Q904100
Q902221
645
495
345
7
D RANGE – UNDER COUNTER DISHWASHERS
GENERAL FEATURES
■
Supplied with set of surface tray filters to limit contamination
of wash water
■
2 year warranty
■
Built-in detergent and rinse aid dispensers
■
Up to 400 plates per hour
Soft touch controls, twin digital temperature displays
■
Fitted drain pump option
■
Selectable thermostop for guaranteed temperatures
■
Fitted breaktank (type “A” air gap) on D510 models
■
Selectable energy saving option
■
D510 supplied with 1 glass/cup & 1 plate rack
■
TECHNICAL FEATURES
■
Voltage 240V – single phase
■
Voltage 415V – 3 phase option available on D500 and D510
■
Water supply pressure – minimum 2 atm / maximum 4 atm
■
Wash tank temperature – 55°C (adjustable)
■
Rinse boiler temperature – 85°C (adjustable)
CERTIFICATION
■
WRAS on D510 and D510D
D500
D510
Model
D500
D500D
D500WS
D500WSD
D510
D510D
Rack size
mm
500 x 500
Useable
Height mm
300
500 x 500
300
Dimensions mm
Cycle Time
Power
WxDxH
Sec
kW
575 x 610 x 815
60-120-180
2.6/4.6/6.6
Inclusive of fitted drain pump
Inclusive of built in water softener
Inclusive of built in water softener and drain pump
575 x 635 x 815
60-120-180
2.6/4.6/6.6
Inclusive of fitted drain pump
Amps
Required
13/20/30
13/20/30
Price
£
2,985
3,175
3,210
3,400
3,395
3,580
Ancillaries
Item
Water Softener (manual)
Water Softener (automatic)
Booster Pump
Universal Stand
(Fits all machines)
Racks – Wire
Racks – Plastic
Breaktanks
(class “A” air gap)
Racking System
Chemicals
8
Variants
12 litre
16 litre
Cold water
Hot water
Pump for low rinse water pressure or to connect machine to conventional
hot water supply (not exceeding 50°C)
520mm high adjustable stand
520mm high adjustable stand – stainless steel
520mm high adjustable stand – chrome
Glass/cup rack
Plate rack
Cutlery rack
Large saucer rack
Glass/cup rack
Plate rack
Round cutlery insert
Compartment racks
(Internally fitted as standard to D510)
Breaktank with rinse booster pump (external freestanding)
Breaktank without rinse booster pump (external freestanding)
Mobile three tier racking system
For original Maidaid® chemicals see page 52
Part No.
Price £
110
Q900012
149
Q900016
545
Q900100
845
Q900104
245
Q904001 (Brass Head)
125
Q904002 (Cast Iron Head)
55
Q902100
115
Q902101
75
Q902104
48
Q902007
48
Q902012
65
Z970074
17
Q902008
36
Z972001
36
Z972003
5
Z976011
P.O.A.
Various
Q904101
Q904100
Q902221
645
495
345
EVOLUTION RANGE –
UNDER COUNTER DISHWASHERS
GENERAL FEATURES
TECHNICAL FEATURES
■
2 year warranty
■
Voltage 240V – Single phase
■
Designed to minimise energy usage
■
Voltage 415V – Three phase option available
■
Low water consumption
■
■
All machines double skinned
Water supply pressure – minimum 2 atm/maximum 4 atm
– Water softener versions minimum 2.5 atm
■
Simple soft touch control, digital temperature display
■
Wash tank temperature – 55º C (adjustable)
■
Automatic cycle self cleaning at drain down
■
Rinse boiler temperature – 85º C (adjustable)
■
Selectable quick start and energy saving option
■
Selectable thermostop for guaranteed rinse temperature
■
Superior peristaltic dosing for both detergent and rinse aid
■
Chemical priming and dose control from the control panel
■
Three programmable cycle times
■
Fully moulded wash tank
■
MWT – Maidaid® Wash Technology
– 10% improvement in wash results
■
MRT – Maidaid® Rinse Technology
– Constant rinse performance
■
MDT – Maidaid® Drain Technology
– Drain pump as standard
■
MCS – Maidaid® Continuous Softener
– on model 510WS
CERTIFICATION
■
WRAS
510
Model
Evolution 510
Evolution 510WS
Rack size
mm
500 x 500
500 x 500
Useable
Height mm
360
360
Dimensions mm
WxDxH
600 x 600 x 820
600 x 600 x 820
510WS
Cycle Time
Power
Sec
kW
60-120-180 Adjustable 2.6/4.6/6.6
60-120-180 Adjustable 2.6/4.6/6.6
Amps
Required
13/20/30
13/20/30
Price
£
3,755
4,075
Ancillaries
Item
Water Softener (manual)
Water Softener (automatic)
Booster Pump
Universal Stand
(Fits all machines)
Racks – Wire
Racks – Plastic
Racking System
Chemicals
Variants
8 litre
12 litre
Cold water
Hot water
Pump for low rinse water pressure or to connect machine to conventional
hot water supply (not exceeding 50°C)
520mm high adjustable stand
520mm high adjustable stand – stainless steel
520mm high adjustable stand – chrome
Glass/cup rack
Plate rack
Glass/cup rack
Plate rack
Mobile three tier racking system for model 510
For original Maidaid® chemicals see page 52
Part No.
Price £
98
Q900008
110
Q900012
545
Q900100
845
Q900104
245
Q904001 (Brass Head)
125
Q904002 (Cast Iron Head)
55
Q902100
115
Q902101
75
Q902104
48
Q902007
48
Q902012
36
Z972001
36
Z972003
345
Q902221
9
C RANGE – PASS THROUGH DISHWASHERS
GENERAL FEATURES
TECHNICAL FEATURES
■
2 year warranty
■
Voltage – 240V single phase or 415V three phase
(converted to order or on site)
■
C1010 with fitted type ‘A’ air gap breaktank
■
Simple electro-mechanical push button controls
■
C1025WS includes internal auto water softener
■
Proven electronic time and temperature control
■
C1025WS supplied complete with detergent pump
■
2 cycle times
■
Water supply pressure – minimum 2 atm / maximum 4 atm
■
Corner or straight through inlet tabling configurations
■
Wash tank temperature – 55°C
■
Built-in rinse aid dispenser
■
Rinse boiler temperature – 85°C
■
Surface tray filter – to prevent debris from contaminating wash water
■
Self draining wash pump – to reduce health risk from bacteria build up
■
Up to 1080 plates per hour
■
C1000 – ideal machine for high volume glasswashing
■
Superbly designed internal surfaces – simple to keep clean
■
Supplied with 1 plastic open and 2 plastic plate racks
CERTIFICATION
■
WRAS on C1010
C1025WS (shown with tabling – not included)
C1010 (shown with tabling – not included)
C1000
Model
C1000
C1010
C1025WS
Plates
Per Hour
Up to 1080
Up to 1080
D
INT P
DET P
Rack
size mm
500 x 500
Useable
Height mm
400
Dimensions mm
WxDxH
720 x 810 x 1450
Cycle Time
Sec
60-120
Power
Amps
kW
Required
4.8 or 6.8 (1 phase) 20 or 30
6.8 (3 phase)
10/phase
(Specification as C1000 + fitted breaktank)
500 x 500
400
716 x 740 x 1509
90-120-180
4.6/6.6 (1 phase)
adjustable
6.6 (3 phase)
Additional charge for fitted drain pump (also available as a retro fitted kit)
Additional charge for internal fitted booster pump (also available as a retro fitted kit)
Additional charge for fitted detergent pump (also available as a retro fitted kit)
20 or 30
10/phase
Price
£
3,755
4,065
4,410
235
235
235
Ancillaries
Item
Water Softener (manual)
Water Softener (automatic)
External Booster
Pump
Tabling
Chemicals
10
Variants
16 litre
20 litre
Cold water
Hot water
Pump for low rinse water pressure or to connect machine to conventional
hot water supply (not exceeding 50°C)
See page 15
For original Maidaid® chemicals see page 52
Part No.
Price £
149
Q900016
195
Q900020
545
Q900100
845
Q900104
245
Q904001 (Brass Head)
125
Q904002 (Cast Iron Head)
D RANGE – PASS THROUGH DISHWASHERS
GENERAL FEATURES
■
■
■
■
■
■
■
■
■
■
■
■
■
■
CONSTANT RINSE PERFORMANCE (CRP)
2 year warranty
D2020 with Constant Rinse Performance (CRP)
D2020 with fitted type ‘A’ air gap breaktank
Precise and reliable electronic control with soft touch operation
Digital boiler and wash tank temperature displays
3 cycle times plus continuous operation
Corner or straight through inlet tabling configurations
Built-in rinse aid dispenser
Surface tray filter – to prevent debris from contaminating wash water
Self draining wash pump – to reduce health risk from bacteria build up
Up to 1080 plates per hour
Low water capacity wash tank – energy saving
Superbly designed internal surfaces –
simple to keep clean
Supplied with 1 plastic
open and 2 plastic
plate racks
Traditionally, machines rinse by using cold mains water to push hot
water out of the rinse boiler, resulting in mixed colder water at the end
of the cycle.
With CRP, no cold water is used and the rinse temperature remains
constant throughout, producing consistently cleaner dishes as a result.
CERTIFICATION
■
WRAS on D2020
TECHNICAL FEATURES
■
■
■
■
Voltage – 240V single
phase or 415V three
phase (converted to
order or on site)
Water supply pressure –
minimum 2 atm /
maximum 4 atm
Wash tank temperature –
55°C (adjustable)
Rinse boiler temperature –
85°C (adjustable)
D2020 (shown with tabling, sink and pre-wash spray arm – not included)
D2020
Model
D2020
Plates
Per Hour
Up to 1080
D
INT P
DET P
Racks
Supplied
500 x 500
Useable
Height mm
400
Dimensions mm
Cycle Time
WxDxH
Sec
710 x 810 x 1530
60-110-150 & Continuous
(includes fitted breaktank)
Additional charge for fitted drain pump (also available as a retro fitted kit)
Additional charge for internal fitted booster pump (also available as a retro fitted kit)
Additional charge for fitted detergent pump (also available as a retro fitted kit)
Power
kW
6.5 (1 phase)
9.1 (3 phase)
Amps
Required
28
13/phase
Price
£
5,150
235
235
235
Ancillaries
Item
Water Softener (manual)
Variants
16 litre
20 litre
Water Softener (automatic) Cold water
Hot water
Pump for low rinse water pressure or to connect machine to conventional
External Booster
hot water supply (not exceeding 50°C)
Pump
Pressure pump set
See page 15
Tabling
For original Maidaid® chemicals see page 52
Chemicals
Part No.
Price £
149
Q900016
195
Q900020
545
Q900100
845
Q900104
245
Q904001 (Brass Head)
125
Q904002 (Cast Iron Head)
325
Q904006
11
EVOLUTION RANGE –
PASS THROUGH DISHWASHERS
GENERAL FEATURES
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
2 year warranty
Designed to minimise energy usage
Low water consumption
Simple soft touch control, digital temperature display
Automatic self cleaning cycle at drain down on model 2020
Selectable energy saving option
Selectable quick start
Selectable thermostop for guaranteed rinse temperature
Built in breaktank
Superior peristaltic dosing for rinse aid as standard
Superior peristaltic detergent dosing optional
Surface tray filter
Three programmable cycle times
Fully moulded wash tank
MWT – Maidaid® Wash Technology – 10% improvement in wash results
MRT – Maidaid®
Rinse Technology
– Constant rinse
performance
on models 1010
& 2020
■
MDS – Maidaid® Drain System on model 1010
– Operates with gravity or optional pumped drain
MDT – Maidaid® Drain Technology on model 2020
– Drain pump as standard
TECHNICAL FEATURES
■
■
■
■
■
■
■
New model 2025WS includes internal auto water softener
New model 2025WS supplied complete with detergent pump
Voltage 240V – Single phase
Voltage 415V – Three phase option available
Water supply pressure – minimum 2 atm/maximum 4 atm
Wash tank temperature – 55º C (adjustable)
Rinse boiler temperature – 85º C (adjustable)
CERTIFICATION
■
WRAS
Evolution 2025WS
(shown with tabling –
not included)
Evolution 1010
(shown with tabling, sink and pre-wash
spray arm – not included)
Model
Evolution 1010
Evolution 2020
Evolution 2025WS
D
INT P
DET P
Rack
size mm
500 x 500
Useable
Height mm
400
Evolution 2020
(shown with tabling –
not included)
Dimensions mm
WxDxH
710 x 800 x 1590
Cycle Time
Power
Sec
kW
60-120-180
4.8/6.8 (1 phase)
Adjustable
6.8 (3 phase)
500 x 500
400
710 x 800 x 1590
60-120-180
6.4 (1 phase)
Adjustable
9.1 (3 phase)
500 x 500
400
706 x 740 x 1565
60-120-180
4.6 or 6.6 (1 phase)
Adjustable
6.6 (3 phase)
Additional charge for fitted drain pump (also available as a retro fitted kit)
Additional charge for internal fitted booster pump (also available as a retro fitted kit)
Additional charge for fitted detergent pump (also available as a retro fitted kit)
Amps
Required
16 or 26 (1 phase)
13 (3 phase)
30 (1 phase)
13 (3 phase)
16 or 30 (1 phase)
10 (3 phase)
Price
£
5,760
6,520
6,850
235
235
235
Ancillaries
Item
Water Softener (manual)
Variants
16 litre
20 litre
Water Softener (automatic) Cold water
Hot water
Pump for low rinse water pressure or to connect machine to conventional
External Booster
hot water supply (not exceeding 50°C)
Pump
Pressure pump set
See page 15
Tabling
For original Maidaid® chemicals see page 52
Chemicals
12
Part No.
Price £
149
Q900016
195
Q900020
545
Q900100
845
Q900104
245
Q904001 (Brass Head)
125
Q904002 (Cast Iron Head)
325
Q904006
MH RANGE – HEAVY DUTY DISHWASHERS
GENERAL FEATURES
TECHNICAL FEATURES
■
2 year warranty
■
Voltage 240V – single phase or 415V – 3 phase
■
Constructed of heavy gauge stainless steel – built to last
■
Water supply pressure – minimum 2 atm / maximum 4 atm
■
Soft touch controls, twin digital temperature displays
■
Wash tank temperature – 55°C (adjustable)
■
Proven electronic controls
■
Rinse boiler temperature – 85°C (adjustable)
■
Powerful wash pump to shift stubborn deposits
■
Double skin – for low noise in operation and heat conservation
■
All MH models have fitted breaktank (type “A” air gap) as standard
(ideal for Health Care market)
■
Self draining wash pump – to reduce health risk from bacteria build up
■
All models have 3 adjustable cycle times (25 to 300 seconds)
■
Built-in detergent and rinse aid dispensers
■
Thermostop system on all models to ensure rinse temperatures for
good results
■
Supplied with 1 glass/cup & 1 plate rack dimensions 500 x 500mm
■
Moulded wash tank for easy cleaning
■
MH520T Under counter model with
extra high internal clearance for
380mm diameter plates. It is not
possible to supply with drain pump
■
MH720 Upright front opening
dishwasher with clearance
for 430mm diameter plates
MH720 supplied with open end
tray rack as standard
■
■
CERTIFICATION
■
WRAS
MH500 & MH720 supplied with
set of surface tray filters to limit
contamination of wash water
MH520
Model
MH520
MH520T
MH720
D
MH520T
MH720
Rack size
Useable
Dimensions mm
Cycle Time
Power
mm
Height mm
WxDxH
Sec
kW
500 x 500
320
600 x 610 x 850
25 to 300
5.1
500 x 500
400
600 x 680 x 865
25 to 300
5.1
500 x 500
450
600 x 700 x 1385
25 to 300
7.7
Additional charge on above models for a fitted drain pump (also available as a retro-fit kit)
Amps
Required
23
23
32
Price
£
3,720
3,910
4,380
250
Ancillaries
Item
Water Softener (manual)
Water Softener (automatic)
Booster Pump
Racks – Wire
Racks – Plastic
Racking System
Chemicals
Variants
16 litre – low hardness areas
20 litre – high hardness areas
Cold water
Hot water
Pump for low rinse water pressure or to connect machine to conventional
hot water supply (not exceeding 50°C)
Glass/cup rack
Plate rack
Cutlery rack
Large saucer rack
Glass/cup rack
Plate rack
Round cutlery insert
Compartment racks
Mobile three tier racking system
For original Maidaid® chemicals see page 52
Part No.
Price £
149
Q900016
195
Q900020
545
Q900100
845
Q900104
245
Q904001 (Brass Head)
125
Q904002 (Cast Iron Head)
48
Q902007
48
Q902012
65
Z970074
17
Q902008
36
Z972001
36
Z972003
5
Z976011
P.O.A.
Various
345
Q902221
13
MH RANGE – HEAVY DUTY PASS THROUGH DISHWASHERS
GENERAL FEATURES
■
Built-in rinse aid dispenser
■
Thermostop system on all models to ensure rinse temperatures for
good results
■
Supplied with 1 cup & 1 plate 500 x 500mm racks
■
2 year warranty
■
Constructed of heavy gauge stainless steel – built to last
■
Soft touch controls, twin digital temperature displays
■
Proven electronic controls
■
All MH models have fitted breaktank (type “A” air gap) as standard
(ideal for Health Care market)
■
Double skinned insulated hood for reduced noise and heat retention
■
Powerful wash pump to shift stubborn deposits
■
Moulded wash tank enables easy cleaning
■
Surface tray filters – to prevent debris from contaminating wash water
■
Double skin – for low noise in operation and heat conservation
■
Self draining wash pump – to reduce health risk from bacteria build up
CERTIFICATION
■
3 adjustable cycle times
■
TECHNICAL FEATURES
MH2040*
■
Voltage – Model MH2040 240V single phase or 415V three phase
(converted to order or on site)
– Model MH2050 415V three phase
■
Water supply pressure – minimum 2 atm / maximum 4 atm
■
Wash tank temperature – 55°C (adjustable)
■
Rinse boiler temperature – 85°C (adjustable)
WRAS
MH2050*
*shown with tabling – not included
Model
MH2040
MH2050
HALDP2
HALINT
HALDET
Plates
Per Hour
Up to 1080
Up to 1300
Racks
Useable
Dimensions mm
Cycle Time
Power
Supplied
Height mm
WxDxH
Sec
kW
500 x 500
400
720 x 730 x 1410
60 to 300
7.5
500 x 500
400
720 x 730 x 1410
50 to 300
10.5
Additional charge for fitted drain pump (also available as a retro fitted kit)
Additional charge for internal fitted booster pump (also available as a retro fitted kit)
Additional charge for fitted detergent pump (also available as a retro fitted kit)
Amps
Required
30
16/phase
Price
£
5,710
6,105
250
250
250
Please note: Drain pump and internal booster pump cannot be fitted to the same machine
Ancillaries
Item
Water Softener (manual)
Variants
16 litre
20 litre
Water Softener (automatic) Cold water
Hot water
Pump for low rinse water pressure or to connect machine to conventional
External Booster Pump
hot water supply (not exceeding 50°C)
Pressure pump set
See page 16
Tabling
For original Maidaid® chemicals see page 52
Chemicals
14
Part No.
Price £
149
Q900016
195
Q900020
545
Q900100
845
Q900104
245
Q904001 (Brass Head)
125
Q904002 (Cast Iron Head)
325
Q904006
C RANGE, D RANGE AND EVOLUTION RANGE –
PASS THROUGH DISHWASHER TABLING
FEATURES
■
All tabling is suitable for 500 x 500mm racks
■
Supplied flat packed for easy assembly
■
Available left or right hand arrangement – must be specified
■
All legs supplied with height adjustable feet
■
Tables including sinks have single 3⁄4" hole for monobloc spray arm
and 1 1⁄2" waste
■
All sinks are 500mm wide x 400mm front to back x 250mm deep
■
All tables with spashback are 745mm deep
Stainless steel scrap bin c/w castors and lid
Closed end table c/w undershelf. 700mm long,
615mm deep
704002
717000
80201 (Left hand)
Closed end table c/w splashback and
undershelf. 1200mm long. (Right hand as
illustrated)
Closed end table c/w splashback, undershelf
and sink. 1200mm long. (Right hand as
illustrated)
Closed end table c/w splashback, short
undershelf, sink and scrap hole. 1200mm long.
(Right hand as illustrated)
80203 (Left hand)
80205 (Left hand)
80207 (Left hand)
80204 (Right hand)
80206 (Right hand)
80208 (Right hand)
Pre-wash spray arm: Monoblock spray arm –
hot & cold water feed
Pre-wash spray arm: Twin pillar spray arm –
hot & cold water feed with stem tap
Q900505
Q900511
Closed end table c/w splashback and
undershelf. 700mm long. (Right hand as
Illustrated)
80200 (Right hand)
Item
Description
Part No.
Pre-wash Spray Arms
Pre-wash spray arm: Single feed – hot or cold spray arm
Pre-wash spray arm: Single feed – hot or cold spray arm with stem tap
Pre-wash spray arm: Monoblock spray arm – hot & cold
Pre-wash spray arm: Monoblock spray arm – hot & cold with stem tap
Pre-wash spray arm: Twin pillar spray arm – hot & cold
Pre-wash spray arm: Twin pillar spray arm – hot & cold with stem tap
A range of tabling is available to order – see page 53 for full details
Q900500
Q900501
Q900505
Q900506
Q900510
Q900511
Additional Tabling
15
MH RANGE – PASS THROUGH DISHWASHER TABLING
FEATURES
■
All tabling is suitable for 500 x 500mm racks
■
Supplied flat packed for easy assembly
■
Available left or right hand arrangement – must be specified
■
All legs supplied with height adjustable feet
■
Tables including sinks have single 3⁄4" hole for monobloc spray arm
and 1 1⁄2" waste
■
All sinks are 500mm wide x 400mm front to back x 250mm deep
Simple shelf that secures to either
side of machine.
510 x 600mm long shelf
Simple open ended table with under shelf.
510 x 610mm long
Closed end table.
Available 700 or 1200mm long
HAL T10
HAL T28
HAL T34B (1200mm)
Closed end table. Left or right hand version.
Standard length 1200mm. Other lengths
available
Corner Table
Table c/w sink and undershelf. 1200mm
HAL T35
HAL A10
HAL T50
Pre-wash spray arm: Monoblock spray arm –
hot & cold water feed
Pre-wash spray arm: Twin pillar spray arm –
hot & cold water feed with stem tap
Q900505
Q900511
HAL T34A (700mm)
Item
Description
Part No.
Pre-wash Spray Arms
Pre-wash spray arm: Single feed – hot or cold spray arm
Pre-wash spray arm: Single feed – hot or cold spray arm with stem tap
Pre-wash spray arm: Monoblock spray arm – hot & cold
Pre-wash spray arm: Monoblock spray arm – hot & cold with stem tap
Pre-wash spray arm: Twin pillar spray arm – hot & cold
Pre-wash spray arm: Twin pillar spray arm – hot & cold with stem tap
A range of tabling is available to order – see page 53 for full details
Q900500
Q900501
Q900505
Q900506
Q900510
Q900511
Additional Tabling
16
Price
£
220
270
270
320
270
320
MINIRACK – SINGLE TANK DISHWASHERS
■
Full width door for maximum access
From 50 to 130 racks per hour
■
Low noise levels for operator comfort
From 900 to 2350 dishes per hour
■
Optional breaktank available
■
Inline or corner dryer option
■
A Minirack model is also available for volume washing of glasses
■
Designed to minimise running costs
■
Reversible direction on models R3000 & R3002
TECHNICAL FEATURES – EXCLUDING DRYER
■
All models use 500mm square baskets with a useable height of 400mm
■
Voltage 415V – 3 phase and neutral
■
Digital temperature display
■
16 to 18 kW – 50°C water supply (dependant on model)
■
Self draining wash pump – to reduce the possible build up of bacteria
■
25 to 27 kW – 15°C water supply (dependant on model)
■
Stainless steel scrap tray – prevents solids fouling wash water
■
Water supply 1.5 to 4 bar
Potential of 5 kW energy saving with heat recovery unit
■
Wash and rinse economisers – energy saving as wash/rinse action stops
after short non-use delay
Supremely designed for ease of daily cleaning
■
■
Latest water blade technology for improved wash performance
■
As little as 1.8 litres used per rack
■
Water consumption up to 35% less than pass through machines
■
‘Smart’ electronic colour coded interface
GENERAL FEATURES
■
■
■
R3002
(Illustration shown with tabling – not included)
R3000
(Illustration shown with tabling – not included)
Model
R3000
R3000 C
R3002
R3002 C
Dosing
Breaktank
MH101232
MH101233
Detail
Racks
Dimensions mm
per Hour
WxDxH
Hot fill
50 – 100
1150 x 770 x 1565
Cold fill
50 – 100
1150 x 770 x 1565
Three speed – hot fill
50 – 100 – 130
1150 x 770 x 1565
Three speed – cold fill
50 – 100 – 130
1150 x 770 x 1565
Optional fitted peristaltic dosing pumps for detergent and rinse aid
Optional fitted breaktank
–
–
Handed wing splash guard (supplied as part of exit roller tabling, see page 19)
Handed wing splash guard (supplied as part of exit roller tabling, see page 19)
Power
kW
16
25
18
27
–
–
Amps
per Phase
22
36
26
38
–
–
Price
£
10,410
10,665
12,210
12,505
510
570
59
59
Part No.
915028
Price £
4,930
915029
3,435
915030
3,520
Ancillaries
Item
Minirack Dryer
Minirack Steam Condenser
Minirack Heat Recovery and
Steam Condenser
Detail
Electric drying module. Adds 600mm to length of Minirack.
1150 cubic metres of air an hour, 400 watt fan. 6 kW of heating power
Electric fan, 200 watt. 700 cubic metres of air an hour. Consumes 250 litres of
cold water per hour. No increase to length of machine. Reduces steam released
into the working environment. Suitable for hot fill machines only
For cold water feed machines only. Electric fan, 200 watt. 700 cubic metres of air
an hour. No increase to length of machine. Reduces steam released into the working
environment. Converts potentially wasted energy into 5 kW of power to pre-heat the
incoming water and reduces the power required to run a cold fill machine
17
MINIRACK – DUAL TANK DISHWASHERS
■
Latest water blade technology for improved wash performance
From 65 to 220 racks per hour
■
As little as 1.8 liters used per rack
■
From 1200 to 4000 dishes per hour
■
Water consumption up to 35% less than pass through machines
■
Inline prewash as standard or corner prewash option available.
Both deliver 400 litres pre minute of additional wash performance
■
‘Smart’ electronic colour coded interface
■
Inline or corner dryer options
TECHNICAL FEATURES – EXCLUDING DRYER
■
Designed to minimise running costs
■
Voltage 415V – 3 phase + neutral
■
All models use 500mm square baskets with a useable height of 400mm
■
21 to 24 kW – 50°C water supply
■
Digital temperature display
■
31 to 34 kW – 15°C water supply
■
Self draining wash pump – to reduce the possible build up of bacteria
■
Water supply 1.5 to 4 bar
■
Stainless steel scrap tray – prevents solids fouling wash water
■
Potential of 5 kW energy saving with heat recovery unit
■
Wash and rinse economisers –energy saving as wash/rinse action stops
after short non-use delay
■
Supremely designed for ease of daily cleaning
■
Designed to minimise running costs
GENERAL FEATURES
■
R3004
(Illustration shown with Minirack
dryer and tabling – not included)
R3003
(Illustration shown with tabling – not included)
Model
R3003
R3003 C
R3004
R3004 C
Dosing
Breaktank
MH101232
MH101233
Detail
Racks
Dimensions mm
per Hour
WxDxH
Three speed, prewash – hot fill 65 – 130 – 170
1970 x 770 x 1565
Three speed, prewash – cold fill 65 – 130 – 170
1970 x 770 x 1565
Three speed, prewash – hot fill 85 – 170 – 220
1970 x 770 x 1565
Three speed, prewash – cold fill 85 – 170 – 220
1970 x 770 x 1565
Optional fitted peristaltic dosing pumps for detergent and rinse aid
Optional fitted breaktank
–
–
Handed wing splash guard (supplied as part of exit roller tabling, see page 19)
Handed wing splash guard (supplied as part of exit roller tabling, see page 19)
Power
kW
21
31
24
34
–
–
Amps
per Phase
30
44
34
48
–
–
Price
£
17,910
18,205
19,565
19,865
510
570
59
59
Part No.
915028
Price £
4,930
915029
3,435
915030
3,520
Ancillaries
Item
Minirack Dryer
Minirack Steam Condenser
Minirack Heat Recovery and
Steam Condenser
18
Detail
Electric drying module. Adds 600mm to length of Minirack.
1150 cubic metres of air an hour, 400 watt fan. 6 kW of heating power
Electric fan, 200 watt. 700 cubic metres of air an hour. Consumes 250 litres of
cold water per hour. No increase to length of machine. Reduces steam released
into the working environment. Suitable for hot fill machines only
For cold water feed machines only. Electric fan, 200 watt. 700 cubic metres of air
an hour. No increase to length of machine. Reduces steam released into the working
environment. Converts potentially wasted energy into 5 kW of power to pre-heat the
incoming water and reduces the power required to run a cold fill machine
MINIRACK – TABLING
FEATURES
■
All tabling is suitable for 500 x 500mm racks
■
Supplied flat packed for easy assembly
■
Available left or right hand arrangement – must be specified
■
All legs supplied with height adjustable feet
■
Tables including sinks have single 3⁄4" hole for monobloc spray arm
and 1 1⁄2" waste
■
All sinks are 500mm wide x 400mm front to back x 250mm deep
Inlet table c/w drain and short splashback.
1200, 1500 or 1800mm long, 700mm deep.
(Right hand as illustrated)
Mechanised rack feed corner unit, links to
machines rack drive. Left or right hand.
600 x 650mm
600
650
For Left hand inlet:
75451 (1200mm)
75452 (1500mm)
75453 (1800mm)
For Right hand inlet:
75456 (1200mm)
75457 (1500mm)
75480 (Left hand)
75458 (1800mm)
75481 (Right hand)
Inlet or outlet table, c/w undershelf.
700 or 1100mm long, 600mm deep
Outlet table for unit with drying module only,
c/w under shelf. 700 or 1100mm long,
600mm deep
75482 (700mm)
75484 (700mm)
75483 (1100mm)
75485 (1100mm)
75500
Roller exit table, c/w drain and legs.
1100, 1600 or 2100mm long, 630mm deep
includes pair of splash guards
90 degree curved exit roller table,
c/w drain and legs. 1100 x 1100mm
Pre-wash spray arm:
Monoblock spray
arm – hot & cold
water feed
Pre-wash spray arm:
Twin pillar spray arm –
hot & cold water feed
with stem tap
717068
Q900505
Q900511
90 degree powered exit table. 800 x 800mm
717066 (1100mm)
717067 (1600mm)
717086 (2100mm)
An additional range of tabling is available to order – see page 53 for full details
19
RACK CONVEYORS
■
Proven rugged design and reliability that can be tailored to your
specification to solve all volume rack ware-washing requirements
Modules available for:
Prewash, wash or double wash, rinse or double rinse
■
Five dryer options
■
Easy to use with minimum staff training
■
Two heat recovery options
■
Fifteen basic models offering electric or steam heating.
■
Splash guards and steam condensers
Capacity to process 80 to 306 500mm racks per hour
Please note: Rack conveyors are not supplied with rinse aid or detergent dosing as standard,
FEATURES
■
■
details available on request
KEY
1 Prewash
5 Power rinse
2 1st wash
6 Final rinse
3 Power wash
7 Drying
4 Steam condenser and
energy recovery
4
1
2
3
5
6
Speak to your Area Sales Manager for a free site survey and
quotation relating to your precise site requirements.
20
7
RACK CONVEYORS
AX 220
1800
RR
W
AX 220 – Reinforced washing system/double rinsing
Model
Racks
Per Hour
Machine
Power
Amps
PreDouble
Length
kW
per Phase
wash
Wash
mm
Section
AX 220
80 to 110
1800
23
33
–
–
Note: All models are 750mm deep and the height can be adjusted between 1770 and 2200mm
Main
Wash
Double
Rinse
Yes
Yes
Reinforced
Double
Rinse
–
21
RACK CONVEYORS
AX 250 – (shown with optional
dryer unit – not included)
2000
2R
W
AX 250 – Reinforced washing system/double rinsing
Model
Machine
Power
Amps
PreDouble
Length
kW
per Phase
wash
Wash
mm
Section
AX 250
110 to 140
2000
32.4
46
–
–
Note: All models are 750mm deep and the height can be adjusted between 1770 and 2200mm
22
Racks
Per Hour
Main
Wash
Double
Rinse
Yes
–
Reinforced
Double
Rinse
Yes
RACK CONVEYORS
AX 310 – (shown with optional corner prewash and inlet sink table, not included)
2400
RR
W
P
AX 310 – Reinforced prewash system/reinforced washing/ double rinsing
Model
Racks
Per Hour
Machine
Power
Amps
PreDouble
Length
kW
per Phase
wash
Wash
mm
Section
AX 310
140 to 190
2400
32.8
46
Yes
–
Note: All models are 750mm deep and the height can be adjusted between 1770 and 2200mm
Main
Wash
Double
Rinse
Yes
Yes
Reinforced
Double
Rinse
–
23
RACK CONVEYORS
AX 330 – (shown with optional dryer and inlet extension, not included)
2700
RR
W
W
AX 330 – Reinforced prewash system/reinforced washing/ double rinsing
Model
Machine
Power
Amps
PreDouble
Length
kW
per Phase
wash
Wash
mm
Section
AX 330
180 to 240
2700
37
52
–
Yes
Note: All models are 750mm deep and the height can be adjusted between 1770 and 2200mm
24
Racks
Per Hour
Main
Wash
Double
Rinse
Yes
Yes
Reinforced
Double
Rinse
–
RACK CONVEYORS
AX 540 – (shown with optional dryer and steam condenser units, not included)
6000
2R
W
W
P
AX 540 – Reinforced prewash system/double reinforced washing/ double rinsing
Model
Racks
Per Hour
Machine
Power
Amps
PreDouble
Length
kW
per Phase
wash
Wash
mm
Section
AX 540
230 to 310
3500
50.3
71
Yes
Yes
Note: All models are 750mm deep and the height can be adjusted between 1770 and 2200mm
Main
Wash
Double
Rinse
Yes
–
Reinforced
Double
Rinse
Yes
25
RACK CONVEYOR ACCESSORIES
Shelf dryer – optimises water removal
from any surface
Shelf dryer – optimises water removal
from any surface
Steam condenser – recommended when
machine is installed in low-ventilation area
LC90/2 12kW shelf dryer 600mm long
LC90/900 12kW shelf dryer 900mm long
LC91 Steam condenser
Compact heat recovery
Heat recovery – recovers the heat produced
by cold water machines to heat the cold
water input to approx 45°C
Heat recovery with heat pump – recovers the
heat produced by cold water machines to
heat the cold water input to approx 65°C
TR91 Compact heat recovery
TR98 Heat recovery
TR91 Compact heat recovery
TR98 Heat recovery
LC90 6kW shelf dryer 600mm long
Compatible Accessories
LC90 6kW shelf dryer 600mm long
LC90/2 12kW shelf dryer 600mm long
LC90/900 12kW shelf dryer 900mm long
LC91 Steam condenser
TR91 Compact heat recovery
TR91 Compact heat recovery
TR98 Heat recovery
TR98 Heat recovery
TR99/1 Heat recovery and heat pump
Additional boiler for cold fill.
Not required for units with heat recovery units.
Adds 12kW to the machine loading.
26
AX 220
Yes
Yes
Yes
Yes
Yes
–
–
–
–
Yes
TR99/1 Heat recovery
AX 250
Yes
Yes
Yes
Yes
Yes
–
–
–
–
Yes
AX 310
Yes
Yes
Yes
Yes
–
Yes
Yes
Yes
Yes
AX 330
–
Yes
Yes
Yes
–
Yes
–
Yes
Yes
Yes
AX 540
–
Yes
Yes
Yes
–
Yes
–
Yes
Yes
Yes
RACK CONVEYOR – TABLING
Plain table with under shelf
1200 x 590 x 850mm
Plain corner table 550 x 550 x 850mm
Grading table 1600 x 1050 x 850mm
T 35
A 10
TC 16
Shelf for 1600mm grading table
Grading table 2400 x 1050 x 850mm
Shelf for 2400mm grading table
M 16
TC 24
M 24
Grading table c/w mechanised basket
advance 1800 x 1450 x 1700mm
Grading table c/w mechanised basket
advance 2400 x 1450 x 1700mm
Plain table c/w sink and splash back
1200 x 730 x 850mm
RTC 18
RTC 24
T 55
Plain table c/w sink, scrap hole and splash
back 1500 x 730 x 850mm
Plain table c/w sink, scrap hole and splash
back 1800 x 730 x 850mm
Stub roller table c/w drain tank and end stop
microswitch 1100 x 650 x 850mm
T 80
T 90
LC 96/1
,
27
RACK CONVEYOR – TABLING
Stub roller table c/w drain tank and end stop
microswitch 1600 x 650 x 850mm
90° curved gravity roller table
1300 x 1300 x 850mm
90° mechanised curve – driven by rack
machine 850 x 850 x 850mm
LC 96/1A
LC 97
LC 77/2
90° mechanised curve – self driven
850 x 850 x 850mm
180° mechanised curve – self driven
850 x 1500 x 850mm
90° loading table – driven by rack machine
700 x 610 x 900mm
LC 97/2
LC 97/3
LC98
Open basket 500 x 500mm
Open basket – close meshed base for cutlery
500 x 500mm
Plate basket 500 x 500mm
Z972001
Z972002
Z972003
Tray basket 500 x 500mm
Cutlery 8 compartment insert basket
A comprehensive range
of baskets are
available including:
height extenders,
section dividers,
inclined base inserts
and storage trolleys.
Z972030
28
Z972032
FLIGHT MACHINES
■
For the heaviest ware-washing requirements, conveyor designed for
continuous operation
Modules available for:
Prewash, single to quadruple wash, rinse or double rinse
■
Two dryer options
■
Easy to use with minimum staff training
■
Two heat recovery options
■
Eight basic models offering electric or steam heating
■
Splash guards, neutral zone and steam condensers
■
Capacity to process 2,400 to 10,000 plates per hour with conveyor
speeds of 0.8 to 3.3 metres per minute
FEATURES
■
KEY
1 Inlet zone
7 Turboblower
2 Prewash
8 Shelf dryer
3 Power wash
9 Outlet zone
4 Double rinse
5 Heat recovery
with heat pump
5
6 Stage dryer
2
1
3
3
4
6
8
7
9
Speak to your Area Sales Manager for a free site survey and
quotation relating to your precise site requirements.
29
UTENSIL/POT WASHERS
GENERAL FEATURES
New advanced design, ‘Smart’ soft touch electronic user interface
■
Voltage 415V – three phase + neutral
■
Self-diagnostics across the range
■
Water supply pressure – 2 to 4 bar
■
Reduced width, plus increased maximum product height
■
Wash tank temperature – 55°C (adjustable)
■
Rinse aid and detergent pumps fitted as standard
■
Rinse boiler temperature – 85°C (adjustable)
■
Eleven wash cycles from 2 to 12 minutes
■
MRT – Maidaid® Rinse Technology with breaktank
■
Stainless steel, double wall construction with stainless steel chassis
■
Vertically mounted wash pump – self draining
■
Carefully designed moulded wash tank
■
Internal pressure boosting pump
■
Stainless steel wash and rinse arms
■
Split door for easy access, lower section double skinned
■
Stainless steel sliding rack
■
All utensil/pot washers are supplied with one standard open basket rack
■
Tray holders and cutlery insets illustrated are available separately
■
U132e has twin 3 kW wash pumps
■
U132e has option of split chamber operation
■
All models have self cleaning cycle
U61e
Model
U61e
U61He
U70e
U132e
30
TECHNICAL FEATURES
■
Thermorinse
Wash Tank Filling
U61He
Rack size
mm
610 x 550
610 x 550
700 x 700
1320 x 700
Maximum useable
height mm
650
850
850
850
Rinse Boiler Filling
Rinsing at 85°C
U70e
Dimensions mm
WxDxH
720 x 780 x 1700 / 1760
720 x 780 x 1900 / 1960
850 x 850 x 1900 / 1960
1470 x 850 x 1900 / 1960
U132e
Cycle Time
Min
2 to 12
2 to 12
2 to 12
2 to 12
Power
kW
7.4
8
11
15.5
Amps
per phase
11
12
16
22
GRANULAR POT WASHER
■
Fanned ventilation to minimise steam spillage at cycle end
High performance, driven granules wash power
■
Full range of pots, tray and utensil holders available
■
Eliminates pre-soaking of dirty pots and pans
■
Supplied with baskets
■
Five adjustable cycle times with or without granules
■
Rinse aid dispenser fitted as standard
■
Simple electronic controls with self-diagnostics
■
Detergent dispenser option available
■
Twin temperature display
■
Use of original granules recommended
■
Double wall body with full high performance thermo-acoustic
insulation
TECHNICAL FEATURES – EXCLUDING DRYER
■
Split door construction
■
Voltage 415V – three phase + neutral
■
Super powerful 3 kW wash pump with AISI 316 stainless body
and impellor
■
Water supply pressure – 2 to 4 bar
■
12.5 kW – 50 deg C
GENERAL FEATURES
■
■
Vertically mounted stainless wash and rinse arms
■
Rotating wash basket, motor driven through safety clutch
■
Easy clean moulded wash tank
■
Easily accessed granules collection basket
MH GRANULAR
Model
MH GRANULAR
DET GP
Cold Fill
Basket
730Ø
MH GRANULAR
Illustration shown with round
basket (included with machine)
and service trolley (not included)
Maximum useable
Dimensions mm
height mm
WxDxH
600
1100 x 908 x 1900/2250
Additional charge for fitted detergent pump
Additional charge for fitted cold water element
Cycle times
Min
4,6,8,10,12
Ancillaries
Item
Granules – Bucket of 9 kgs
Round basket for 6 No. GN 1/1 or 2 No. 2/1 (One supplied with machine)
Tray stand for 10 No. GN1/1 (One supplied with machine)
Tray stand for 4 No. 600 x 400 x 20 & 4 No. 600 x 400 x 50 (One supplied with machine)
Stand for spatula basket (One supplied with machine)
Spatula/utensil basket (One supplied with machine)
Small pots and frying pans support (One supplied with machine)
Larger pots support (One supplied with machine)
Service trolley for loading/unloading
Part No.
Q108137
Q108138
Q108139
Q108140
Q108141
Q108142
Q108143
Q108144
Q108145
31
ICEMAKERS
GENERAL FEATURES
ICE CUBE >
TECHNICAL FEATURES
■
3 year warranty
■
Voltage 240V – single phase – 13 amp power supply
■
Unique spray system technology minimizes scaling and produces
separate, crystal clear, slow-melting ice cubes
■
1 to 6 bar operating water pressure
■
Ambient room temperature between 10º to 25°C required
(optimum 20°C)
■
Water supply temperature between 3º to 20°C required (optimum 10°C)
■
All models produce 18g cube except M22-5 (13g cube)
■
WRC regulations compliant
■
Non toxic, fully insulated, easy clean storage bins made from tough
ABS plastic
■
Extra low temperatures allow ice cube to last longer (minus 25°C)
■
Adjustable feet
■
Environmentally friendly refrigerant – R404A
■
Water-cooled version for room temperature above ambient range
available for all models for the same price as air-cooled version
(excluding M22-5)
M22-5
M30-10
M34-16
M65-40
Model
M22-5
M30-10
M34-16
M42-16
M50-25
M65-40
M90-55
M130-65
M155-65
M90-55
Production
Kgs per
24hrs
21
28
34
42
48
65
90
130
155
Bin
Capacity
Kgs
5
10
16
16
25
40
55
65
65
M42-16
M50-25
M130-65
Storage
Capacity
310 x 13g
530 x 18g
950 x 18g
950 x 18g
1470 x 18g
2350 x 18g
3240 x 18g
3830 x 18g
3830 x 18g
Dimensions mm
WxDxH
(inc. feet)
345 x 400 x 595
390 x 460 x 695
500 x 580 x 790
500 x 580 x 790
500 x 580 x 900
738 x 600 x 1020
738 x 600 x 1120
840 x 740 x 1175
840 x 740 x 1175
M155-65
Waste Height
inc. feet
(mm)
130
130
251
251
251
340
340
345
345
Water
Consumption
Litres/Kg
4.5
5.1
3.3
4.0
4.0
2.8
2.5
2.8
2.6
Ancillaries
Item
Miniphos Scale Inhibitor (inline filter for M130/65 – see Modular section)
Miniphos Refill Marble and Filter Pack
Inline Filter Kit – GS6 PH-C QRF & 2 QR Hoses
Replacement Filter – GS6 PH-C QRF
Drain/condensate pump
32
Part No.
Q900400
Q900401
Q907212
Q907213
Q904200
< STANDARD
ICE CUBE
MODULAR
ICE CUBE MAKERS
< MINI ICE CUBE
(FAST ICE)
TECHNICAL FEATURES
GENERAL FEATURES
■
Unique spray system technology minimizes scaling and produces
separate, crystal clear, ice cubes
■
MC300 produces dense, slow melting, 18 gram ice cubes (as standard)
■
MVM500 uses vertical evaporator and produces a 7 gram ice cube,
particularly suited for fast food outlets or with carbonated drinks
■
WRC regulations compliant
■
Extra low temperatures allow ice cube to last longer (minus 25°C)
■
Environmentally friendly refrigerant – R404A
■
Water-cooled versions for high ambient temperatures available
at same price
■
An ice storage bin is required with all models (see page 37)
■
■
■
■
■
Voltage 240V – single phase
– see full technical leaflet
for power requirements
Don’t forget
1 to 6 bar operating water
to order your
pressure
Storage Bin
Three ice cube weights:
– see page 37
(for MC range):
for options.
13 gram – 18 gram – 33 gram
Ambient room temperature
between 10º to 25°C required
(optimum 20°C)
Water supply temperature between 3º to 20°C required (optimum 10°C)
MVM350
MVM500
MVM900
MC80
MC150
MC300
Model
Production
Kgs per
24hrs
Ice Cube
Size
(Gram)
Dimensions mm
WxDxH
Waste Height
(mm)
Air Cooled
Gross
Weight
Kgs
Water
Consumption
Litres/Kg
Air Cooled
2.8
2.5
1.8
2.2
2.6
2.6
Maximum
Power**
kW (Amps)
MVM350
140
7
540 x 544 x 707
42*
85
2.4 (11)
MVM500
225
7
770 x 550 x 805
40*
90
3.2 (14)
MVM900
400
7
770 x 550 x 805
40*
113
5.3 (23)
MC80
90
18/33/13
862 x 470 x 620
226*
83
1.7 (7)
MC150
155
18/33/13
862 x 555 x 720
297*
118
2.7 (12)
MC300
300
18/33/13
1250 x 580 x 848
29*
152
5.3 (23)
* To this height must be added height of storage bin upon which the icemaker is mounted.
** Maximum power is required only during the ice harvest cycle, during ice production power requirements will be approximately half the maximum.
Ancillaries
Item
Inline Filter Kit – GS6 PH-C QRF & 2 QR Hoses
Replacement Filter – GS6 PH-C QRF
Drain/condensate pump
Part No.
Q907212
Q907213
Q904200
33
PEBBLE ICEMAKERS
GENERAL FEATURES
PEBBLES >
TECHNICAL FEATURES
■
Three new models designed to meet the current demand for smaller
individual pieces of ice
■
Voltage 240V – single phase
■
Free standing models 13 amp power supply
■
Produces pebble ice – an irregular shaped ice, between cubes and
granular ice
■
Modular MTM450 16 amp power supply
■
1 to 6 bar water supply pressure
■
Ideal for presenting breakfast fruits, yoghurts and all seafood
■
■
An ideal mixer for cocktails, cubes can be too big and granular/crushed
ice turns the drinks to slush
Ambient room temperature between 10° and 43° C (higher temperature
for water cooled, optimum performance at 21° C)
■
Water supply temperature between 3° and 32° C (optimum 10° C)
■
Two free standing models MTB 852 and MTB1405 and one modular
production unit MTM450
■
The modular unit is suitable for use with Maidaid® bins
■
WRC regulations complaint
■
Environmentally friendly refrigerant – R404A
■
Adjustable feet on stand-alone models
■
Water-cooled versions for high ambient temperatures available
at the same list price as below
MTM450
MTB852
MTB1405
Model
Production
Kgs per
24hrs
MTB852
85
MTB1405
140
MTM450
440
* Applies to production unit only
Bin
Capacity
Kgs
20
50
N/A
Dimensions mm
WxDxH
(inc. feet)
500 x 660 x 800
738 x 690 x 1130
640 x 470 x 700*
Waste Height
inc. feet
(mm)
168
360
228*
Gross
Weight
Kgs
67
105
113*
Water
Consumption
Litres/Kg
1 (Air) 6.3 (Water)
1 (Air) 6.4 (Water)
1 (Air) 5.3 (Water)
Ancillaries
Item
Miniphos Scale Inhibitor
Miniphos Refill Marble and Filter Pack
Inline Filter Kit – GS6 PH-C QRF & 2 QR Hoses
Replacement Filter – GS6 PH-C QRF
34
Part No.
Q900400
Q900401
Q907212
Q907213
GRANULAR ICEMAKERS
< GRANULAR ICE
GENERAL FEATURES
TECHNICAL FEATURES
■
Unique spray system technology minimizes scaling and produces
separate, crystal clear ice
■
Voltage 240V – single phase – 13 amp power supply
■
1 to 6 bar operating water pressure
■
Compact granular ice for many uses in bars, restaurants, fresh food
displays, chemical and pharmaceutical industries.
■
Ambient room temperature between 10º to 25°C required
(optimum 20°C)
■
WRC regulations compliant
■
Water supply temperature between 3º to 20°C required (optimum 10°C)
■
Non toxic, fully insulated, easy clean storage bins made from tough
ABS plastic
■
Extra low temperatures allows ice to last longer (minus 25°C)
■
Adjustable feet
■
Environmentally friendly refrigerant – R404A
■
Water-cooled versions for high ambient temperatures available
at same price
MF90-20
MF150-40
MF150-55
Model
MF90-20
MF150-40
MF150-55
Production
Kgs per
24hrs
90
150
150
Bin
Capacity
Kgs
20
40
55
Dimensions mm
WxDxH
(inc. feet)
500 x 660 x 900
738 x 690 x 1020
738 x 690 x 1120
Waste Height
inc. feet
(mm)
361
340
340
Gross
Weight
Kgs
59
85
94
Water
Consumption
Litres/Kg
1
1
1
Ancillaries
Item
Miniphos Scale Inhibitor
Miniphos Refill Marble and Filter Pack
Inline Filter Kit – GS6 PH-C QRF & 2 QR Hoses
Replacement Filter – GS6 PH-C QRF
Part No.
Q900400
Q900401
Q907212
Q907213
35
MODULAR GRANULAR &
FLAT ICEMAKERS
GENERAL FEATURES
GRANULAR >
FLAT >
TECHNICAL FEATURES
■
MG models – Compact granular ice: Many applications for
restaurants, fish displays & transport, self-service and industry
■
■
MM models – Flat flake ice – sub cooled: Applications in fish
and dairy industries
■
■
Modular models will require a collection / storage bin
(see page 37)
■
■
■
Voltage 240V – single phase
– 13 to 25 amp power supply
1 to 6 bar operating water
Don’t forget
pressure
to order your
Ambient room temperature
Storage Bin
between 10º to 43°C required
– see page 37
(optimum 20°C)
for options.
Water supply temperature
between 3º to 32°C required
(optimum 10°C)
MG and MM models are all available either air or water cooled
MG250
MG500
MG1000
MM350
MM800
Model
Production
Kgs per
24hrs
Dimensions mm
WxDxH
Waste Height
(mm)
Air Cooled
Gross
Weight
Kgs
Water
Consumption
Litres/Kg
Air Cooled
1
1
1
1
1
Maximum
Power**
kW (Amps)
MG250
250
640 x 470 x 700
228*
82
1.9 (8)
MG500
500
640 x 470 x 700
228*
104
2.7 (12)
MG1000
1000
934 x 684 x 700
60*
172
5.7 (24)
MM350
320
900 x 588 x 705
60*
127
2.1 (9)
MM800
850
1107 x 700 x 880
65*
290
4.6 (20)
* To this height must be added height of storage bin upon which the icemaker is mounted.
** Maximum power is required only during the ice harvest cycle, during ice production power requirements will be approximately half the maximum.
36
MODULAR ICEMAKERS – STORAGE BINS
GENERAL FEATURES
ROLLER BIN – TECHNICAL FEATURES
■
Bin M240PE – moulded in food safe
polyethylene, highly insulated
■
Bin MT range are all manufactured in
18/8 scotch brite stainless steel and are
highly insulated for long life ice
■
Suitable for all types of Maidaid®
Modular Icemakers
■
All models are constructed from two main components
■
18/8 stainless steel supporting frame which supports the Icemaker
and ice collection bin while trolleys are out of the parked position
■
Trolleys for the collection and transportation of the ice are moulded
in food safe polyethylene and are highly insulated for prolonged
ice storage
■
All storage bins have a drain fitting as standard
The popular combination of the
MVM350 on a M240PE storage bin
M240PE
MT200
MT350
MR100
MDR100
MDR500
Model
Dimensions mm
WxDxH
(inc. feet)
942 x 795 x 1153
870 x 780 x 1000
1250 x 790 x 1000
Suitable
Icemaker
Models
MC80/MC150, MVM350, MVM500/900, MG280/500
MC80, MC150, MVM350/500/900, MG250/500, MM350
MC150/300, MVM500/900, MG250/500, MM350/800
MR100
MDR100
Storage
Capacity
Kgs
240
200
350
Bay
Trolley
17
108
50
108 x 2
795 x 970 x 1284
1560 x 970 x 2204 to 2158
MDR500
300
1560 x 1070 x 2660 to 2454
MG250/500
MG250/500, MC150, MC300, MVM500/900, MG250/500,
MG250/500 (Double), MM350, MM800
MM800, MM800 (Split), MG1000, MG500 (Double)
M240PE
MT200
MT350
108 x 2
37
HALCYON® RANGE – BOTTLE COOLERS
GENERAL FEATURES
TECHNICAL FEATURES
■
Robust construction
■
Interior lights
■
Voltage 240V – single phase – 13 amp supply
■
Self closing doors
■
Fan assisted
■
Temperature range +3 / + 7°C
■
Lockable doors
■
Adjustable shelves
■
Insulation – 25mm polystyrene foam (CFC free)
■
Double glazed
■
Refrigerant – R134a (CFC free)
HB600
HB600B
HB900B
HB900
38
Model
Colour
HB600
HB600B
HB900
HB900B
Silver
Black
Silver
Black
External
Dimensions mm
WxDxH
600 x 520 x 900
600 x 520 x 900
900 x 520 x 900
900 x 520 x 900
Internal
Dimensions mm
WxDxH
520 x 385 x 750
520 x 385 x 750
820 x 385 x 750
820 x 385 x 750
Capacity
330ml Bottles
Power
W
Doors
Shelves
Price
£
95
95
145
145
160
160
180
180
1
1
2
2
2
2
4
4
545
545
675
675
HALCYON® RANGE – BOTTLE COOLERS
GENERAL FEATURES
TECHNICAL FEATURES
■
Robust construction
■
Voltage 240V – single phase – 13 amp supply
■
Stainless steel door surround
■
Temperature range +2 / +10ºC
■
Self closing
■
Insulation – 32mm cyclopentane
■
Lockable
■
Refrigerant – R134a (CFC free)
■
Double glazed
■
High quality Danfoss compressor
■
Forced air cooling
■
High quality EBM fan motor
■
Adjustable shelves
■
Fin Block evaporator
■
Interior lights
■
Fin block condensor
■
Stainless steel interior
■
LED temperature control
■
Stainless steel welded vap tray used
■
Copper vaporiser is coated to avoid corrosion
■
Special coating on evaporator fins inhibits corrosion
and aids defrosting
■
Easy to clean up spillages inside cabinet
HB1200SS
Model
Colour
HB1200SS
Stainless steel
External
Dimensions mm
WxDxH
1200 x 514 x 907
Internal
Dimensions mm
WxDxH
1136 x 432 x 728
Capacity
330ml Bottles
Power
W
Doors
Shelves
Price
£
285
180
2
4
1,395
39
BEZZERA ESPRESSO COFFEE MACHINES – BZ RANGE
GENERAL FEATURES
■
■
■
■
■
■
■
■
Compact single group, ideal for small coffee production –
small restaurants & bars
12 months ‘return to base’ parts and labour warranty*
Easy to use
No waste, no mess using Bezzera freshly sealed Espressopots
Hot water font & steam arm
Manually filled water reservoir, supplied with mini water filter
(change regularly for optimum results)
Electrical heating
■
■
Machine will automatically stop if water level drops too low
ESPBZ02S manual operation
BZ07DE automatic with two progammable doses and one
manual dose buttons
TECHNICAL FEATURES
■
■
■
Voltage – 240V single phase
Boiler capacity 1.5 litres (on both models)
Water reservoir capacity:
ESPBZ02S 4 litres,
BZ07DE 3 litres
ESPBZ02S
BZ07DE
Model
Type
No. of
Groups
ESPBZ02S Espressopot version
1
BZ07DE
Automatic
1
Handles
Single/Double
S
D
Dimensions mm
WxDxH
360 x 425 x 360
250 x 425 x 375
Boiler
Capacity
1.5 lt.
1.5 lt.
Power
kW
1.2
1.3
Amps
13
13
Ancillaries & Options
Item
Water Treatment
(essential to limit scaling)
Cleaning Powder
Knock-out Draw
(see page 49)
Cappuccino Kit
Variants
Replacement water tank softener (for ESPBZ02S only)
25 litres at 14 degrees Clarke capacity
(volume prices available)
Box of 10 sachets of head cleaning powder (1⁄2 sachet per head)
Single
Double
Stainless steel 20 oz milk jug, chocolate shaker, clip-on milk thermometer,
milk spatula, shot glass and instructions
Part No.
Q103419
Cases
–
Z802106
Q907001
Q907002
Q907010
–
–
–
–
Coffee: Espressopot
Item
Premium Blend
(see page 48)
Variants
Case of 150 Premium pots (blend 80% Arabica / 20 % Robusta)
Part No.
ESPPOTS1
Decaffeinated
(see page 48)
Case of 150 Decaffeinated blend pots
ESPPOTS2
* Our standard warranty is a 12 month ‘return to base’ warranty. Return shipping costs must be met by the buyer.
40
No. of Cases
1
3
6
1
3
6
BEZZERA ESPRESSO COFFEE MACHINES – BZ RANGE
GENERAL FEATURES
TECHNICAL FEATURES
■
Compact single group, ideal for small coffee production –
small restaurants & bars
12 months ‘return to base’ parts and labour warranty*
Easy to use
Electrical heating
■
Automatic boiler water supply
■
Machine will automatically stop if water level drops too low
■
Vibration delivery pump on both models
■
Steam and hot water brewing through steam wand with lever tap
■
BZ09PM has two step heating, first for coffee dosing and second
to raise steam temperature
■
Coffee pressure gauge
■
Stainless steel AISI 304 body
■
■
■
■
Voltage - 240 single phase
■
Boiler capacity: BZ09PM 0.5 litres, BZ10PM 1.5 litres
■
Water reservoir capacity: BZ09PM 3 litres, BZ10PM 3 litres
BZ10PM
BZ09PM
Model
BZ09PM
BZ010PM
Type
Semi-automatic
Semi-automatic
No. of
Groups
1
1
Handles
Single/Double
D
D
Dimensions mm
WxDxH
250 x 425 x 375
250 x 425 x 375
Boiler
Capacity
0.5 lt.
1.5 lt.
Power
kW
1.7
1.4
Amps
13
13
Ancillaries & Options
Item
Cleaning Kit
(see page 49)
Cleaning Powder
Knock-out Draws
(see page 49)
Cappuccino Kit
(see page 49)
Espressopot
Conversion Kit
Variants
Blanking handle, brush and cleaning powder for group head cleaning,
grinder brush and instructions
Box of 10 sachets of head cleaning powder (1⁄2 sachet per head)
Single knockout draw to fit under grinder
(Dimensions W-300mm x D-410mm x H-91mm)
Stainless steel milk jug, chocolate shaker, clip-on milk thermometer, milk spatula
and instructions for a better Cappuccino
Kit for subsequent conversion of a group for Espressopot use
(price per group)
Part No.
ESPCL
Z802106
Q907001
Q907011
ESPKIT2
* Our standard warranty is a 12 month ‘return to base’ warranty. Return shipping costs must be met by the buyer.
41
BEZZERA ESPRESSO COFFEE MACHINES – GIULIA & GALATEA DOMUS RANGES
GENERAL FEATURES
TECHNICAL FEATURES
■
Voltage - 240 single phase
■
12 months ‘return to base’ parts and labour warranty*
Electric heating
■
Boiler capacity: Giulia MN 2 litres, Galatea Domus MN 2 litres
■
Automatic boiler water supply
■
Water reservoir capacity: Giulia MN 4 litres, Galatea Domus MN 4 litres
■
Machine will automatically stop if water level drops too low
■
Vibration delivery pump on both models
■
Water tank
■
Stainless steel AISI 304 body
■
GALATEA DOMUS MN
GIULIA MN
Model
Type
GIULIA MN Semi-automatic
DOMUS MN Semi-automatic
No. of
Groups
1
1
BACK FLUSH
HANDLE
Handles
Single/Double
S&D
S&D
Dimensions mm
WxDxH
320 x 450 x 440
360 x 455 x 450
Boiler
Capacity
2 lt.
2 lt.
Power
kW
1.6
1.6
Amps
13
13
Ancillaries & Options
Item
Back Flush Handle
Cleaning Kit
(see page 49)
Cleaning Powder
Knock-out Draws
(see page 49)
Cappuccino Kit
(see page 49)
Espressopot
Conversion Kit
Variants
Suits Giulia and Galatea Domus models
Blanking handle, brush and cleaning powder for group head cleaning,
grinder brush and instructions
Box of 10 sachets of head cleaning powder (1⁄2 sachet per head)
Single knockout draw to fit under grinder
(Dimensions W-300mm x D-410mm x H-91mm)
Stainless steel milk jug, chocolate shaker, clip-on milk thermometer, milk spatula
and instructions for a better Cappuccino
Kit for subsequent conversion of a group for Espressopot use
(price per group)
* Our standard warranty is a 12 month ‘return to base’ warranty. Return shipping costs must be met by the buyer.
42
Part No.
Q907157
ESPCL
Z802106
Q907001
Q907011
ESPKIT2
BEZZERA ESPRESSO COFFEE MACHINES – BISTRO COMPACT RANGE
GENERAL FEATURES
TECHNICAL FEATURES
■
Voltage 240V – Single phase
■
12 months ‘on site’ parts and labour warranty
Uncomplicated design
■
High quality copper boiler
■
Simple to use
■
Dual pressure gauge
■
All working surfaces stainless steel
■
Large heat exchangers
■
Compact width
■
Fully automatic version has precise volumetric control
■
Semi or fully automatic versions
■
Hot water font and steam arm
■
Automatic filling
■
Espressopot option can be added to one or both groups at no extra
cost – if specified at time of order
■
Supplied with free cleaning kit
■
BC2P
Model
Type
BC2P
BC2D
Semi-automatic
No. of
Groups
2
BC2D
Handles
Dimensions mm
Boiler
Single/Double
WxDxH
Capacity
S+D
610 x 490 x 490
8 lt.
Fully automatic version of above machine
Power
kW
2.75
Amps
13
Ancillaries & Options
Item
Water Treatment
Cleaning Kit
(see page 49)
Cleaning Powder
Knock-out Draws
(see page 49)
Cappuccino Kit
(see page 49)
Espressopot
Conversion Kit
Variants
ScaleGard 195 water treatment kit
(essential to limit scaling & to improve water quality for better coffee)
(N.B. The life of the filter is limited to the amount of water used and water hardness,
the filter should be replaced after a maximum of 4 months)
Replacement filter cartridge 195
Blanking handle, brush and cleaning powder for group head cleaning,
grinder brush and instructions
Box of 10 sachets of head cleaning powder (1⁄2 sachet per head)
Single knockout draw to fit under grinder
(Dimensions W-300mm x D-410mm x H-91mm)
Stainless steel milk jug, chocolate shaker, clip-on milk thermometer, milk spatula
and instructions for a better Cappuccino
Kit for subsequent conversion of a group for Espressopot use
(price per group)
Part No.
Q907200
Q907201
ESPCL
Z802106
Q907001
Q907011
ESPKIT2
43
BEZZERA ESPRESSO COFFEE MACHINES – BISTRO RANGE
GENERAL FEATURES
■
Hot water font & steam arm (2 steam arms on B3 models)
■
Supplied with free cleaning kit
■
4 group versions available – enquire for details
■
12 months ‘on site’ parts and labour warranty
All stainless steel and chrome finish
■
Simple and clean lines
■
Available as semi or fully automatic versions
TECHNICAL FEATURES
■
Fully automatic versions have precise volumetric control for
a perfect espresso
■
Voltage – 240V single phase
■
Copper boiler accessed through solid brass detachable end plate
Espressopot option can be added to any or all groups at
no extra cost – if specified at time of order
■
Dual pressure gauge
■
■
B1P
B2P
B3P
B4P
B1D
B2D
B3D
B4D
Model
B1P
B1D
B2P
B2D
B3P
B3D
B4P
B4D
Type
Semi-automatic
No. of
Groups
1
Semi-automatic
2
Semi-automatic
3
Semi-automatic
4
Handles
Dimensions mm
Boiler
Single/Double
WxDxH
Capacity
S+D
490 x 445 x 490
5 lt.
Fully automatic version of above machine
S+D
700 x 445 x 490
11 lt.
Fully automatic version of above machine
S+2xD
930 x 445 x 490
17 lt.
Fully automatic version of above machine
S+3xD
1150 x 445 x 490
24 lt.
Fully automatic version of above machine
Power
kW
2.3
Amps
3.3
20
5.3
30
5.3
30
13
Ancillaries & Options
Item
Water Treatment
Cleaning Kit
(see page 49)
Cleaning Powder
Knock-out Draws
(see page 49)
Cappuccino Kit
(see page 49)
Espressopot
Conversion Kit
44
Variants
ScaleGard 195 water treatment kit
(essential to limit scaling & to improve water quality for better coffee)
(N.B. The life of the filter is limited to the amount of water used and water hardness,
the filter should be replaced after a maximum of 4 months)
Replacement filter cartridge 195
Blanking handle, brush and cleaning powder for group head cleaning,
grinder brush and instructions
Box of 10 sachets of head cleaning powder (1⁄2 sachet per head)
– Single knockout draw to fit under grinder
(Dimensions W-300mm x D-410mm x H-91mm)
– 2 Draw knockout draw for Bistro, B2P & B2D
(Dimensions W-700mm x D-530mm x H-155mm)
– 3 Draw knockout draw for Bistro, B3P & B3D
(Dimensions W-1200mm x D-530mm x H-155mm)
Stainless steel milk jug, Chocolate shaker, Clip-on milk thermometer, milk spatula
and instructions for a better Cappuccino
Kit of parts for subsequent conversion of a group to Espressopot use
(price per group)
Part No.
Q907200
Q907201
ESPCL
Z802106
Q907001
Q907000
Q907003
Q907011
ESPKIT2
BEZZERA ESPRESSO COFFEE MACHINES – ELLISSE RANGE
GENERAL FEATURES
■
Hot water font & steam arm, (2 steam arms on E2 & E3 models)
■
4 group versions available – enquire for details
■
Supplied with free cleaning kit
■
12 months ‘on site’ parts and labour warranty
Elegant style for ‘front of bar’ use
■
Available in charcoal trim as standard
■
Available in blue trim to order
TECHNICAL FEATURES
■
Available as semi or fully automatic versions
■
Voltage – 240V single phase
■
Fully automatic versions have precise volumetric control for
a perfect espresso
■
Copper boiler accessed through solid brass detachable end plate
■
Dual pressure gauge
■
■
Espressopot option can be added to any or all groups at
no extra cost – if specified at time of order
E1P
E2P
E3P
E4P
E1DE
E2DE
E3DE
E4DE
Model
Type
E1P
E1DE
E2P
E2DE
E3P
E3DE
E4P
E4DE
Semi-automatic
No. of
Groups
1
Semi-automatic
2
Semi-automatic
3
Semi-automatic
4
Handles
Dimensions mm
Boiler
Single/Double
WxDxH
Capacity
S+D
570 x 500 x 510
5 lt.
Fully automatic version of above machine
S+D
710 x 500 x 510
11 lt.
Fully automatic version of above machine
S+2xD
960 x 500 x 510
17 lt.
Fully automatic version of above machine
S+3xD
1170 x 500 x 510
24 lt.
Fully automatic version of above machine
Power
kW
2.2
Amps
3.3
20
5.3
30
5.3
30
13
Ancillaries & Options
Item
Water Treatment
Cleaning Kit
(see page 49)
Cleaning Powder
Knock-out Draws
(see page 49)
Cappuccino Kit
(see page 49)
Espressopot
Conversion Kit
Variants
ScaleGard 195 water treatment kit
(essential to limit scaling & to improve water quality for better coffee)
(N.B. The life of the filter is limited to the amount of water used and water hardness,
the filter should be replaced after a maximum of 4 months)
Replacement filter cartridge 195
Blanking handle, brush and cleaning powder for group head cleaning,
grinder brush and instructions
Box of 10 sachets of head cleaning powder (1⁄2 sachet per head)
– Single knockout draw to fit under grinder
(Dimensions W-300mm x D-410mm x H-91mm)
– 2 Draw knockout draw for Ellisse, E2P & E2DE
(Dimensions W-700mm x D-530mm x H-155mm)
– 3 Draw knockout draw for Ellisse, E3P & E3DE
(Dimensions W-1200mm x D-530mm x H-155mm)
Stainless steel milk jug, chocolate shaker, clip-on milk thermometer, milk spatula
and instructions for a better Cappuccino
Kit for subsequent conversion of a group for Espressopot use
(price per group)
Part No.
Q907200
Q907201
ESPCL
Z802106
Q907001
Q907000
Q907003
Q907011
ESPKIT2
45
BEZZERA ESPRESSO COFFEE MACHINES – EAGLE RANGE
GENERAL FEATURES
■
12 months ‘on site’ parts and labour warranty
Traditional, elegant and stylish 2 group machine
■
Available in Brass or Cartier finish (chrome with brass details)
■
Available as semi or fully automatic
■
Fully automatic versions have precise volumetric control for
a perfect espresso
■
Espressopot option can be added to one or both groups at
no extra cost – if specified at time of order
■
Hot water font & steam arm
■
All Eagles supplied to order – please enquire for details
■
TECHNICAL FEATURES
■
Voltage – 240V single phase
■
Copper boiler accessed through solid brass detachable end plate
■
Dual pressure gauge
BRASS (shown in semi-automatic version)
CARTIER (shown in fully automatic version)
Model
Type
Brass
Cartier
Semi-automatic
No. of
Groups
2
Handles
Dimensions mm
Boiler
Power
Single/Double
WxDxH
Capacity
kW
S+D
740 x 500 x 1000
11 lt.
3.3
As above but in chrome and brass finish
Additional charge for fully automatic version of above machines
Amps
20
Ancillaries & Options
Item
Water Treatment
Cleaning Kit
(see page 49)
Cleaning Powder
Knock-out Draws
(see page 49)
Cappuccino Kit
(see page 49)
Espressopot
Conversion Kit
46
Variants
ScaleGard 195 water treatment kit
(essential to limit scaling & to improve water quality for better coffee)
(N.B. The life of the filter is limited to the amount of water used and water hardness,
the filter should be replaced after a maximum of 4 months)
Replacement filter cartridge 195
Blanking handle, brush and cleaning powder for group head cleaning,
grinder brush and instructions
Box of 10 sachets of head cleaning powder (1⁄2 sachet per head)
Single knockout draw to fit under grinder
(Dimensions W-300mm x D-410mm x H-91mm)
Stainless steel milk jug, chocolate shaker, clip-on milk thermometer, milk spatula
and instructions for a better Cappuccino
Kit of parts for subsequent conversion of a group to Espressopot use
(price per group)
Part No.
Q907200
Q907201
ESPCL
Z802106
Q907001
Q907011
ESPKIT2
BEZZERA ESPRESSO COFFEE MACHINES – GALATEA
GENERAL FEATURES
TECHNICAL FEATURES
■
Voltage – 240V single phase
■
12 months ‘on site’ parts and labour warranty
Superb retro styling
■
Copper boiler accessed through solid brass detachable end plate
■
Semi automatic that has the look of a traditional lever machine
■
Dual pressure gauge
■
Highly polished chrome finish for maximum effect
■
Bezzera illuminated in soft blue light on rear panel
■
Adjustable height cup platform, 95 to 190mm cup height
■
Twin steam arms and single water arm
■
Available as semi automatic
■
Espressopot option can be added to one or both groups
at no extra cost – if specified at time of order
■
Hot water font & steam arm
■
All Galatea’s supplied to order – please enquire for details
■
Galatea
Model
Galatea
Type
Semi-automatic
No. of
Groups
2
Handles
Single/Double
S+D
Dimensions mm
WxDxH
850 x 660 x 800
Boiler
Capacity
11 lt.
Power
kW
3.8
Amps
16
Ancillaries & Options
Item
Water Treatment
Cleaning Kit
(see page 49)
Cleaning Powder
Knock-out Draws
(see page 49)
Cappuccino Kit
(see page 49)
Espressopot
Conversion Kit
Variants
ScaleGard 195 water treatment kit
(essential to limit scaling & to improve water quality for better coffee)
(N.B. The life of the filter is limited to the amount of water used and water hardness,
the filter should be replaced after a maximum of 4 months)
Replacement filter cartridge 195
Blanking handle, brush and cleaning powder for group head cleaning,
grinder brush and instructions
Box of 10 sachets of head cleaning powder (1⁄2 sachet per head)
Single knockout draw to fit under grinder
(Dimensions W-300mm x D-410mm x H-91mm)
Stainless steel milk jug, chocolate shaker, clip-on milk thermometer, milk spatula
and instructions for a better Cappuccino
Kit of parts for subsequent conversion of a group to Espressopot use
(price per group)
Part No.
Q907200
Q907201
ESPCL
Z802106
Q907001
Q907011
ESPKIT2
47
BEZZERA ESPRESSO – GRINDERS/DISPENSERS – ESPRESSOPOT COFFEE
■
BB004 – Red finish
Heavy duty construction
■
BB005 – Stainless steel AISI 304 finish
■
Top quality grinding blades
■
Easy operation
■
Precise grinding and delivery adjustment
■
1 kg of beans makes approx. 120 espresso coffees
TECHNICAL FEATURES
■
BB003 – Stainless steel finish
■
■
BB003B – Glossy black finish
GENERAL FEATURES – GRINDERS/DISPENSERS
■
BB003B
Model
Type
BB003B
BB003
BB004
BB005 MN
Heavy Duty Grinder/Dispenser (Black)
Heavy Duty Grinder/Dispenser
Medium Duty Grinder/Dispenser
Medium Duty Grinder/Dispenser
Voltage – 240V single phase
BB003
Bean Hopper
Size
1 kg
1 kg
1
⁄2 kg
1
⁄4 kg
BB004
Grind
Rate
6 kg/hr
6 kg/hr
1 kg/hr
4 kg/hr
Dimensions mm
WxDxH
180 x 380 x 550
180 x 380 x 550
150 x 250 x 340
130 x 260 x 400
BB005 MN
Amps
13
13
13
13
ESPRESSOPOT –
DECAFFEINATED
ESPRESSOPOT –
PREMIUM BLEND
Coffee: Espressopot
48
Item
Premium Blend
Variants
Case of 150 Premium pots (blend 80% Arabica / 20 % Robusta)
Part No.
ESPPOTS1
Decaffeinated
Case of 150 Decaffeinated blend pots
ESPPOTS2
No. of Cases
1
3
6
1
3
6
ADDITIONAL ITEMS FOR BEZZERA ESPRESSO COFFEE MACHINES
GENERAL FEATURES – MILK FOAMER
■
Milk Foamer comes with 12 months
‘return to base’ parts and labour warranty*
■
Stand alone unit for volume production
of foamed milk
■
Prevents delays at the espresso
machine
■
Produces consistent results
CLEANING
KIT
TECHNICAL FEATURES – MILK FOAMER
■
1 kW – 13amp power supply
■
2 litre water tank
CAPPUCCINO KIT
COFFEE PRESS
Q118014
BACK FLUSH
HANDLE
COFFEE PRESS
Q118013
Q907001
STAND FOR
COFFEE PRESS
Q907000
Q907002
MILK FOAMER
Ancillaries & Options
Item
Milk Foamer*
Cleaning Kit
Knock-out Draws
Cappuccino Kit
Back Flush Handle
Coffee Press
Variants
Stainless steel body c/w detachable drip tray (Dimensions W-190mm x D-360mm x H-385mm)
Blanking handle, brush and cleaning powder for group head cleaning,
grinder brush and instructions
– Single knockout draw to fit under grinder (Dimensions W-300mm x D-410mm x H-91mm)
– 2 Draw knockout draw (for BZ02S range)
– 2 Draw knockout draw for Bistro/Ellisse range (Dimensions W-700mm x D-530mm x H-155mm)
– 3 Draw knockout draw for Bistro/Ellisse range (Dimensions W-1200mm x D-530mm x H-155mm)
Stainless steel 32 oz milk jug, chocolate shaker, clip-on milk thermometer, milk spatula
and instructions for a better Cappuccino
Suits Giulia and Galatea Domus models
Suitable for all other models
Solid one piece Bezzera embossed press
Two piece Bezzera embossed press
Stand for coffee press – suits both styles
Part No.
MILKFO
ESPCL
Q907001
Q907002
Q907000
Q907003
Q907011
Q907157
Q907156
Q118013
Q118014
Q118015
* Our standard warranty is a 12 month ‘return to base’ warranty. Return shipping costs must be met by the buyer.
49
WATER SOFTENERS & ANCILLARIES
MANUAL WATER SOFTENER
FEATURES
A manually salt regenerated scale
control system, ideal for the protection
of glass and dishwashers.
■
Four sizes 8 to 20 litre capacity
■
Robust construction and easy to install
■
Simple to manually regenerate by flushing through a salt solution
■
If the correct unit is used then regeneration should not be required
more than once a week except in the hardest water areas
■
Diameter of all models 185mm
■
Softening capacity @ 120 PPM
Item
Manual Water Softener
Variants
8 litre
12 litre
16 litre
20 litre
Capacity – Litres
1000
1500
2100
3000
Part No.
Q900008
Q900012
Q900016
Q900020
FEATURES
AUTOMATIC SALT
REGENERATED
SOFTENER
Automatically salt regenerated
scale control, ideal for glass
and dishwashers suitable for
establishments that cannot
control the task of manual
regeneration.
Item
Variants
Automatic Salt Regenerated Softener
Cold Water
Cold Water
Cold Water
Cold Water
Hot Water
■
Unit regeneration controlled by adjustable time switch, usually set
to run when equipment is not required
■
Five sizes 10 to 30 litres for cold water and 10 litres for hot water
■
Compact design with a speckled grey finish to maintain a clean look
■
Single 13-amp electrical socket required
■
Cold water units for 5 to 40°C, hot water unit for 5 to 65°C water
supply temperature
■
Only weekly salt top up required
■
Softening capacity @ 300 PPM
Capacity – Litres
1400
2300
3000
5200
2300
Dimensions mm
WxDxH
275 x 470 x 550
275 x 470 x 650
275 x 470 x 840
320 x 530 x 1150
275 x 470 x 650
Part No.
Q900100
Q900101
Q900102
Q900103
Q900104
SCALEGARD
FEATURES
A disposable scale control system
designed to protect coffee and
vending machines.
■
Large disposable resin cartridges – Removes scale forming minerals so
there is little or no scale build up, therefore potential service costs are
dramatically reduced
■
Carbon block filter – Removes chlorine taste, odour and requires
minimum flushing at install
■
Built in bypass – Gives best blend of water for hot beverages
■
Quick-change head and cartridge – No tools required for exchange,
fresh seals to prevent leaks fitted to new cartridge
■
Compact design and easy disposal – Can be mounted using bracket
supplied or fitted horizontally into a convenient cupboard; used
cartridges can be disposed of without any environmental concerns
■
Capacity – 2.8 Litre resin filter – Gives 1600 litres of softened water with
an initial hardness of 200 PPM, considered very hard water. 5 Micron
carbon block allowing 4 litres per minute flow rate
Assembled unit:
640mm height x 102mm diameter
(excluding hose and meter)
Item
Scalegard
50
Height mm
420
520
620
920
Type
Filter head, filter cartridge 195, water meter, 2 x 3⁄4" nipples and hose 3⁄4"
Replacement filter cartridge 195
Water meter
Replacement head
Part No.
Q907200
Q907201
Q907202
Q907203
BASKETS AND STANDS
Open plastic
basket
Open plastic
basket
Q902302
Q902303
Z970040
Open plastic coated wire basket
Q902300
Q902000
Q902003
Open plastic coated wire basket
Q902004
Q902005
Plastic pegged basket
Plate plastic coated wire basket
Universal stand – stainless steel
Universal stand – chrome finish
Q902301
Q902011
Q902101
Q902104
Plastic (square) cutlery basket
Plastic (round) cutlery basket
Plate insert plastic coated wire
Plate insert plastic coated wire
Z976016
Z976011
Z970047
Z970044
Z970517
Three tier
mobile
racking
system
Drip tray
Universal stand – black finish
Q902220
Q902226
Q902221
Q902200
Q902201
Item
Open plastic basket 350 x 350 mm
Open plastic coated wire basket 350 x 350 mm
Open plastic basket 385 x 385 mm
Open plastic coated wire basket 390 x 390 mm
Open plastic coated wire basket 400 x 400 mm
Open plastic basket 450 x 450 mm
Open plastic basket 400 x 400 mm
Plate plastic coated wire basket 450 x 450 mm
Open plastic coated wire basket 450 x 450 mm
Plastic pegged basket 450 x 450 mm
Universal stand – black finish
Universal stand – stainless steel
Universal stand – chrome finish
Plastic (square) cutlery basket 110 x 110 x 140 mm
Plastic (round) cutlery basket 110 x 130 mm
Q902202
Q902203
Part
No.
Q902302
Q902000
Q902303
Q902003
Q902004
Q902300
Z970040
Q902011
Q902005
Q902301
Q902100
Q902101
Q902104
Z976016
Z976011
Z970061
Q902100
Item
Part
No.
Plate insert plastic coated wire (15 plates) 308 x 100 mm Z970047
Plate insert plastic coated wire (17 plates) 345 x 100 mm Z970044
Plate insert plastic coated wire (20 plates) 405 x 100 mm Z970061
Plate insert plastic 295 x 90 mm
Q902310
Plate insert plastic coated wire (12 plates) 320 x 80 mm
Z970517
Three tier mobile racking system – 400 baskets*
Q902220
Three tier mobile racking system – 450 baskets*
Q902226
Three tier mobile racking system – 500 baskets*
Q902221
Drip tray 375mm
Q902200
Drip tray 425mm
Q902201
Drip tray 470mm
Q902202
Drip tray 520mm
Q902203
* Three tier mobile racking systems are supplied flat packed for simple
self assembly. Drip trays are included. Baskets are not supplied.
51
WAREWASHING CHEMICAL SUPPLIES
Maidaid® Crystal 3000 Glasswash Detergent
Maidaid® Premier Dishwash Detergent
Maidaid® Premier Dishwash Detergent (20 litres)
Maidaid® Soilmaster Dishwash Liquid
Maidaid® Low-Temp Glasswasher
and Dishwasher Detergent
Maidaid® Glasswash Detergent
Maidaid® Super Rinse Aid
Maidaid® Super Rinse Aid (20 litres)
Item
Maidaid® Crystal 3000 Glasswash Detergent
Maidaid® Premier Dishwash Detergent
Maidaid® Premier Dishwash Detergent
Maidaid® Soilmaster Dishwash Liquid
Maidaid® Low-Temp Glasswasher and Dishwasher Detergent
Maidaid® Glasswash Detergent
Maidaid® Super Rinse Aid
Maidaid® Super Rinse Aid
Maidaid® Glass Renovator
Maidaid® Supersoap X Dishwasher Powder
52
Maidaid® Glass Renovator
Maidaid® Supersoap X Dishwasher Powder
Product Code
Packed
Q902400
Q902404
Q902403
Q902405
Q902410
Q902401
Q902407
Q902408
Q902402
Q902406
2 x 5 litres
2 x 5 litres
1 x 20 litres
2 x 5 litres
2 x 5 litres
2 x 5 litres
2 x 5 litres
1 x 20 litres
2 x 5 litres
1 x 10 kg
STAINLESS STEEL FABRICATION
FEATURES
■
Attractive and efficient work stations
■
All units can be supplied with castors
■
18 gauge sheet stainless steel fabrication
■
3 weeks from time of order to delivery
■
No bacteria-friendly joins or sealed areas
■
All units supplied with taps
■
Ergonomic design makes use of every inch of available space
enabling one operative to do the work of three people
■
Units are not supplied with baskets or machines
WORKCO1
WORK03
WORK02
Model
Description
WORKCO1
WORK02
WORK03
WORK03A
WORK04
Q902221
Q902226
Q902220
Q902220
WORK03A
Cocktail work station
Glasswasher work station
To Suit Glasswasher/
Dishwasher Model
N/A
C500, D500, D510
Dimensions
mm
1800 x 650 x 850
1900 x 650 x 920
Glasswasher work station
Glasswasher work station
Glasswasher work station
Three tier mobile racking system*
Three tier mobile racking system*
Three tier mobile racking system*
C500, D500, D510
D450
C400, D400
C500, D500, D510
D450
C400, D400
1150 x 650 x 920
1075 x 650 x 920
1050 x 650 x 920
570 x 510 x 810
520 x 460 x 810
470 x 410 x 810
Sink Dimensions
mm
N/A
332 x 332 x 200
WHB 229 x 356 x 180
332 x 332 x 200
332 x 332 x 200
332 x 332 x 200
N/A
N/A
N/A
* Three tier mobile racking systems are supplied flat packed for simple self assembly. Drip trays are included. Baskets are not supplied.
53
COMMISSIONING AND TRAINING PACKAGES
To assist customers achieve the best
results from their new warewashing
equipment Maidaid Halcyon® is
PACKAGE ONE
For Under Counter or Pass Through machines
■
pleased to introduce the packages
detailed herewith.
Getting the equipment set correctly for the environment in which
Commissioning only*
PACKAGE TWO
For Under Counter models
■
Commissioning*, plus the following
■
Two plastic open cup/glass racks (or four for 350 and 400mm machines)
■
Two plastic pegged racks (450 and 500mm machines only)
■
Two five litre bottles of Maidaid® Super Rinse Aid
■
Two five litre bottles of Maidaid® Low-Temp Glass/Dishwasher Detergent
■
Staff training** if carried out immediately after commissioning –
they will be operated is vital. Warewashing equipment should not be
considered as plug and play.
All machines will require chemical dosing to be set correctly,
net price £25
machines cannot be supplied ready adjusted to cope with the
different concentrations of chemicals, different water quality and
PACKAGE THREE
deal efficiently with the different products they have to wash.
For Pass Through models
Early staff training is highly recommended to achieve maximum
■
Commissioning*, plus the following
productivity from staff and equipment.
■
Three plastic open cup/glass racks
■
Three plastic pegged racks
Many warewashing machines have been supplied by Maidaid Halcyon®
■
Two five litre bottles of Maidaid® Super Rinse Aid
to sites where the ordering of additional product racks would have
■
Two five litre bottles of Maidaid® Low-Temp Glass/Dishwasher Detergent
resulted in a smoother introduction of the new equipment.
■
Staff training** if carried out immediately after commissioning –
net price £30
PACKAGE FOUR
For Rack machines
■
Commissioning*, plus the following
■
Four plastic open cup/glass racks
■
Four plastic pegged racks
■
Two five litre bottles of Maidaid® Super Rinse Aid
■
Two five litre bottles of Maidaid® Low-Temp Glass/Dishwasher Detergent
■
Staff training** if carried out immediately after commissioning –
net price £45
Conditions and requirements
*Commisioning: Machine must have been installed to a suitable standard and be ready to run. If an unsafe or unacceptable installation is found commisioning will not be attempted
and no credit of charges for package one will be made.
**Training: Machines must be available as for commisioning and it must be assured that all staff to be trained are available at the prearranged time. Trainers cannot be asked to
delay training beyond the agreed start time.
Installation
Maidaid Halcyon® are able to provide an installation service for all equipment in this Product Guide, please contact our office for current prices and conditions.
Delivery
With the exception of the models listed below all prices include delivery to UK mainland. Delivery is to doorstep only, if a different service is required we will be happy to quote for
that service.
Equipment that may be subject to delivery charge: Rack/Flight, Pot/Utensil Washers and Modular Icemakers.
54
NOTES
55
Quality Control
Your Local Distributor
Maidaid Halcyon
The Engine Shed, Top Station Road
Brackley, Northants NN13 7UG
Telephone
Telefax
Email
Web
0845 1308070
01280 845340
sales@maidaid-halcyon.co.uk
www.maidaid.co.uk
CDL04/11/8251
In the event of further technical development we reserve the right to alter our design,
specification and price without notice.
Designed & produced by Carlton Design 01702 420228
info@carltondesign.co.uk www.carltondesign.co.uk
Quality of product and after-sales service is based on the operation of systems to
the internationally recognised quality standard BS EN ISO 9002. However, above
all else, quality of service results from the abilities, motivation and teamwork of
people within the company.
Download PDF