LIMITLESS CONSTRUCTIONS Latham St, Chermside

LIMITLESS CONSTRUCTIONS
Latham St, Chermside
Technical Specifications Documents
Contact: Julie Thompson
(p): 07 3633 6220
(m): 0400 652 506
(e): julie.thompson@reece.com.au
VERSION ONE
May 2016
1
Dear Customer,
Please note that all technical specifications presented are a guide
only, for presentation and evaluation purposes, and are not official
technical documents. All specifications should be verified prior to
construction or installation.
Reece Pty Ltd takes no responsibility for installations done based
upon these specific documents.
2
Mizu 430 Inset Kitchen Sink from Reece
Page 1 of 3
http://www.reece.com.au/bathrooms/products/mizu-430-inset-kitchen-sink-9502317
10/05/2016
page 1 of 1
AL
YEAR
IT Y
E
QU
10
TE
Mizu
Round 430 Inset Kitchen Sink
G UARA
N
REECE PRODUCT QUALITY GUARANTEE
You have purchased a quality product from Reece Pty Ltd
ABN 84 004 097 090 (“Reece”). This product is covered by
a 10 year replacement product warranty and a 12 month
warranty over spare parts and labour.
This warranty does not include faults caused by:
10 YEAR WARRANTY – DOMESTIC USE
This warranty covers faults in the product construction, material
and assembly. Products which are within 10 years from the
date of purchase, found upon inspection by an authorised
Reece representative, to be defective in construction,
material or assembly, will be repaired or exchanged with an
equivalent product free of charge. Replaced items become
Reece’s property.
• Installation or part installation by the purchaser or any person
other than a LICENSED PLUMBER or qualified tradesman
All replacement products will be available for collection without
charge to the customer at the nearest Reece branch to the
customer’s location, or elsewhere as agreed between the
customer and Reece.
Labour and Spare Parts
The labour for the replacement of products and spare parts
to which this warranty applies will be supplied by Reece or
relevant supplier using qualified tradesman engaged by Reece
or relevant supplier within 1 year from the date of purchase.
Spare parts which are within 1 year from the date of purchase
found upon inspection by an authorised Reece representative
to be defective in construction, material or assembly, will be
replaced free of charge.
Warranty Conditions
This warranty will apply only under all of the
following conditions:
• The item has been installed by a licensed plumber or has
been installed by a qualified tradesperson
• The item has been installed for and subjected to domestic
residential use only.
• Failure is due to a fault in the manufacture of the product
• Proof of purchase (including the date of purchase)
is provided
• The installation of the product is in accordance with the
instructions provided
• Incorrect installation or installation not in accordance with
the instructions provided
• Normal wear and tear
• Inadequate or complete lack of maintenance
• Chemical, electrochemical or electrical influences
• Harsh detergents or abrasive cleaners used on
product finishes
1 YEAR WARRANTY – COMMERCIAL USE
‘Commercial’ use is all use other than for normal domestic
residential purposes, including use in non-business places as in
public buildings, schools, sports centres and in establishments
that contain private bathrooms with high frequency of use by
many individuals, such as hotels, motels, retirement villages
and hospitals.
The Commercial warranty covers this product against
manufacturing faults in the construction, material and assembly
of both the finished products and any spare parts for a period
of 1 year from the date of purchase. Products and spare
parts which are found upon inspection by an authorised
Reece representative to be defective in construction, material
or assembly will be repaired or exchanged free of charge.
Replaced items become Reece’s property. The labour for the
replacement of products and spare parts to which this warranty
applies will be supplied by Reece or relevant supplier using
qualified tradesman by Reece or relevant supplier. The Warranty
Conditions and exclusions which apply to the domestic use
warranty also apply to this commercial warranty.
EXCLUSIONS
To the fullest extent permitted by law, Reece excludes all liability
for damage or injury to any person, damage to any property,
and any indirect consequential or other loss or damage.
CLAIM PROCEDURE
For all warranty queries customers are to contact the branch
where the product was purchased. These details can be found
on your purchase invoice.
Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
SINK.T1.10YR
This warranty does not cover products purchased as an
ex-display without being fully checked and tested for sale by
the manufacturer.
• Unsuitable or improper use
Don’t risk it, use a licensed plumber.™
VIVID SLIMLINE
SINK MIXER 160MM G/N
PRODUCT CODE:
FINISH:
STYLISH
PREMIUM
CHROME
FINISH
MATCH WITH....
VS735 CHR
CHROME
CONTEMPORARY
DESIGN
PHOENIX
WARRANTY
TECHNICAL SPECIFICATIONS
CONSUMER INFORMATION
R8
6
172
RANGE:
VIVID SLIMLINE
PRODUCT:
SINK MIXER 160MM G/N
PRODUCT CODE:
VS735 CHR
WATERMARK LICENCE:
WM21009
REVISION DATE:
DEC 2013
CONNECTION TYPE:
N/A
MATERIAL:
BRASS
AVAILABLE FINISHES:
CHROME, MATTE BLACK
WELS RATING:
4 STARS
FLOW RATE:
7.5 LITRES PER MINUTE
TEMPERATURE RATING:
MIN 1° - MAX 75°
PRESSURE RATING:
WARRANTY:
71
15 YEAR REPLACEMENT
CARTRIDGE
7 YEAR REPLACEMENT
PRODUCT OR PARTS
1YEAR REPLACEMENT PARTS
OR PRODUCT & LABOUR
193
316
19.05
MIN 150 KPA
- MAX 500 KPA
158
MERCHANT INFORMATION
CARTON SIZE:
L 320MM x W 275MM
x H 72MM
CARTON WEIGHT:
1.8 KG
OUTER BOX SIZE:
L 560MM x W 330MM
x H 370MM
OUTER BOX WEIGHT:
18 KG
OUTER BOX QUANTITY:
10 CARTONS
BARCODE NUMBER:
9320594 013677
50
EXPLODED VIEW
PARTS LIST
1. MIXER BODY
2. CARTRIDGE 25MM
3. SINK MIXER SPOUT
4. NOZZLE RETAINER
5. AERATOR GASKET
6. AERATOR
7. MIXER HANDLE
5
8. MIXER DOME
3
9. DRESS PLATE
6
10. LOCKING NUT 25MM
11. GRUB SCREW M5x6
4
21
23
12. SCREW CAP
13. MIXER LEVER PIN
12
11
14. M8 THREADED ROD
15. FLEXIBLE HOSE
1
2
10
20
16. O-RING
8
13
17. MOUNTING GASKET
18. MOUNTING PLATE
19. M8 NUT
7
9
11
16
12
17
18
15
14
19
20. O-RING
21. O-RING
22. O-RING
23. SPOUT BEARING
INSTALLATION INSTRUCTIONS
VIVID SLIMLINE SINK MIXER 160MM
Sidelever Sink Mixer Installation Instructions
www.phoenixtapware.com.au
75
150 KPa Min.
550 KPa Max.
Recommended Working
Pressure
Maximum hot water
temperature
Note:
-If the pressure exceeds or is likely to
exceed 550kpa, an approved pressure
limiting device must be installed.
- Flush out all pipe work prior to installation.
- If the water temperature exceeds 75°C, an
approved tempering valve must be fitted.
- Installation should comply with Australian
standard AS3500.1 or relevant local
authority requirements.
Failure to comply with the above may void
all warranties.
Installation Instruction
1 : Cut a mounting hole 35mm in diameter.
2 : Remove one of the hose assemblies from
the mixer. Run Dress Plate over both Hose
Assembly, as shown.
3 : Reattach the hose assembly to Mixer and
fasten with a spanner.
4 : Screw the threaded stud into mixer base.
5 : Fit the rubber ring into Dress Plate groove.
6 : Position Mixer over the mounting hole.
Feed the hoses through the mounting hole.
7 : From underneath the bench, fit “C” gasket
and “C” washer over both hoses and the
threaded stud .
8 : Screw on long nut and fasten firmly with a
tube spanner to secure the mixer.
9 : Connect the water supply.
Red-Marking Hose to hot water.
Blue-Marking Hose to cold water.
10:Turn on the water supply and check for
leaks.
Mixer
30mm MAX.
WATER SUPPLY REQUIREMENTS
Maintenance and Care
-Chrome plated surfaces should be cleaned
with mild liquid detergent or soap and
water.
-Do not use cream cleaners or citrus based
cleaning products, as they are abrasive.
-Use of unsuitable cleaning agents may
damage the surface. Any damage caused in
this way will not be covered by warranty.
Dress Plate
Rubber Ring
“ C ” Gasket
“ C ” Washer
HOT Water Inlet
Red-Marking Hose
Cold Water Inlet
Blue-Marking Hose
Long Nut
Threaded Stud
IN0159 revA
WARRANTY INFORMATION
MANUFACTURER’S WARRANTY
“Our goods come with a guarantee that cannot be
excluded under the Australian Consumer Law
(“ACL”), You are entitled to a replacement or refund
for a major failure and for compensation for any
reasonable or foreseeable loss or damage. You are
also entitled to have repaired or replaced if the
goods fail to be of acceptable quality and a failure
does not amount to a major failure”.
In addition to the above obligations Phoenix offers
the following Manufacturer’s Warranty subject to
the following terms and conditions. Any provision in
the warranty which is inconsistent with the ACL or is
otherwise unenforceable shall be severed from this
warranty to the extent of the inconsistency and the
remainder of the provisions shall continue to apply.
WARRANTY PERIODS
Residential
Phoenix tapware and accessories is made to the
highest industry standards and quality. Refer to
table below for warranty periods.
Catagory
Warranty
Period
Mixers
15Years
-15 Years replacement cartridge
-7Years replacement product or parts
Note: Excludes damage to ceramic
disc cartridges from pieces of copper
tube, plastic tube, sand, dirt or thread
tape etc.
-1 Year replacement product or parts
& labour.
Hand
Shower on
Rail
3Years
-3Years replacement product or parts
-1 Year replacement product or parts
and labour
Tapware &
Standard
Showers
7Years
-7Years replacement product or parts
-1Year replacement product or parts
and labour.
Note: Jumper valves and ceramic disc
spindles; 1Year parts only.
-7Years replacement product or parts
Accessories 7Years
Warranty
Details
* Note: These warranty periods apply to
products purchased after 10th April 2011.
Commercial
(Hotels, Aged Care Facilities, Hospitals, Schools,
Factories, Motels, etc.)
Catagory
All Products
Warranty
Period
1 Year
Warranty
Details
-1Year replacement product or parts
For all Service Enquiries contact below:
This Manufacturer’s Warranty is provided by Phoenix
Industries Pty Ltd.
Telephone: +61 3 9780 4200
Facsimile: + 61 3 9764 1898
Email: sales@phoenixtapware.com.au
Subject always to any overriding obligation pursuant
to the ACL, warranty shall be void for the following
reasons:
- Inability to provide proof of purchase or equivalent
documentation.
- Products not installed by a licensed plumber.
- Products not to relevant National Standards and
State Regulations.
- Products not installed in accordance with the
manufacturer’s installation instructions.
- Products exposed to environmental elements.
- Tapware exposed to water pressures and or
temperatures that exceed stated limitations.
MAXIMUM: Temperature- 75 degrees & Pressure550kPa
MINIMUM: Temperature- 1 degree & Pressure 150kPa (300kPa for Shower/Bath Diverters)
Note: AS/NSZ 3500.1-2003 (Clause 3.3.4) specifies
550kPa maximum water supply pressure at any
outlet within a building for new installations.
- Showers may not be suitable for use within:
* Gravity-fed water systems.
* Some instantaneous hot water systems.
* Pressure supply less than 150kPa.
Note: The 550kPa maximum water supply pressure
does not apply to fire service outlets.
- Isolation stop taps are not fitted as stated on
manufacturer’s installation instructions.
- Fitting of other devices to the outlet of tapware, eg.
water filters.
- Fitting of Phoenix non-approved water flow
regulating devices.
- Fitting of other devices to outlet of tap, e.g., water
filters.
- Non-installation of flow regulated check valve for
hand showers.
- Products used for incorrect applications, non
potable water etc.
- Damage as a result of obstructions due to
inadequate flushing of system before use.
- Services repairs or with non-standard replacement
parts previously undertaken without Phoenix’s
written approval.
- Damage to finishes by adhesives, sealants etc.
- Failure to clean & replace outlet aerator inserts etc.
- Damage to finishes which arise from installation or
post installation use.
- Failure to observe manufacturers care and cleaning
instructions.
- The warranty work is limited to the pre-approved
scope of work. Additional work will require author
zation from Phoenix After Sales & Services
Departments.
- Evidence cannot be produced which confirms that
the relevant product was purchased from a
Phoenix Tapware authorized distributor.
WARRANTY CONDITIONS
Phoenix Warranty covers the repair or, at Phoenix’s
option, the replacement of any products which are
defective through faulty workmanship or materials.
The warranty period commences from date of
purchase or for new buildings date of handover to a
maximum period of 6 months. The warranty period
for replacement products is limited to the expiry
date of the original purchase. The warranty is limited
to the original purchaser and non-transferable. In
order to make a warranty claim, Proof of Purchase
(POP), handover documentation for new homes or
equivalent documentation must be supplied for
warranty claims to be considered. Claims must be
processed through Phoenix’s Customer Service and
each credit claim will be issued with a claim number
which is recorded on the Phoenix system.
Phoenix will not be liable for any claims for labour,
additional products or parts associated with alleged
faulty product for work not approved in advance by
Phoenix in writing.
WARRANTY INFORMATION
WARRANTY CONDITIONS CONT.
Should any warranty claim be made and attended to
by a Phoenix authorized Service Agent and that in the
opinion of the Service Agent or Phoenix the problem
was from faulty installation or use of the goods in
conjunction with products of another manufacturer
or from some other cause other than a manufacturing
defect to the goods for which Phoenix is responsible,
Phoenix has the right to charge a service fee for each
service staff attending the Owner’s premise where
goods have been installed.
Phoenix requires adequate access to products, fittings
and fixtures to undertake warranty repairs. Phoenix
will not be responsible for any consequential damage
or costs where adequate access to product fittings
and fixtures is not accessible.
TAPWARE AND ACCESSORIES
Care and cleaning Instructions
- Under no circumstances should you install
tapware using acetone silicones.
- Never use harsh detergents, citrus based
cleaners or abrasive cleaners, as these will
scratch the surface.
- Where your tapware remains dry in use, a soft
cloth can be used to remove surface dust.
Alternatively, a wipe over with warm soapy
water is all that is required to maintain the
finish in perfect condition for a lifetime of use.
- Use of wax based furniture cream should be
avoided as these can result in a build-up of
deposits, which could detract from the
appearance.
- Do not use undue pressure and wipe in one
direction only.
Note: Phoenix reserves the right to alter, or amend
this warranty offer in writing at any time. Phoenix
reserves the right to provide minor components (eg.
handles, aerators, buttons, dress rings, hinges, clips,
rod and washers) as ‘Parts Only’ to the customer.
page 1 of 3
AFA
FLOW SINKS
230
398
462
406
ø90
388
711
768
279
FEATURES
Recommended use
Domestic, hotel, and commercial
Chromium-Nickel Mix
18/8
Gauge
1.2-1.5mm
Grade
304
Clipping
Flexible clipping system
Sound Deadening
Sound deadening pads
Waste Type
90mm Basket Waste
Waste Position
Rear (for double bowl), Centre (for single bowl)
CLEANING RECOMMENDATIONS
We recommend the use of soapy water or approved cleaners.
This product should not be cleaned with abrasive materials.
Damage caused by improper treatment is not covered by the
product warranty - refer to warranty conditions on the last page.
Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered
trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from
their range without prior notification. Dimensions and set-outs listed are correct at time of publication
however the manufacturer/distributor takes no responsibility for printing errors.
Tech version 2
To see the complete AFA range go to
www.reece.com.au/bathrooms
428
410
440
358
510
540
190
358
802
230
358
454
398
800mm (double), 768mm, 540mm & 430mm
page 2 of 3
AFA
FLOW SINKS
INSTALLATION INSTRUCTIONS
Stone/Solid Benchtops
Wooden/Laminate Benchtops
NOTE:
Note:
-if wall mounted tapware is to be used, consideration
should be made to length of outlet and positioning of
sink in bench top.
-if wall mounted tapware is to be used, consideration
should be made to length of outlet and positioning of
sink in bench top.
-if tapware is to be bench mounted allow suitable
bench top width for fitting tapware.
-if tapware is to be bench mounted allow suitable bench
top width for fitting tapware.
1. Use the template provided to trace the
cutout on both the benchtop and
underlay/timber lining.
1.Use the template provided to trace the
cutout on both the benchtop and underlay.
2. Cutout benchtop and underlay/timber
lining.
2.Cutout benchtop and underlay.
3a.If using sandwich technique, silicone
both the underneath rim of the
undermount bowl and around the
underlay/timber lining cutout.
3b.Position sink underneath benchtop
and mark out position for fixing clips.
3b.If using fixing clips, follow instructions
for wooden/laminate benchtops or affix
wooden blocks to underside of benchtop
to screw fixing clips into.
4. Place sink into position
4.Apply sealant/adhesive to rim of sink
and position underneath benchtop.
Install all securing clips and remove
excess sealant.
countertop
adhesive
5. Silicon around the lip of the sink to
seal between the benchtop and sink
surfaces.
6. Finish by placing benchtop back in
position, sandwiching bowl between
benchtop and underlay/timber lining.
securing clip
woodscrew
(not supplied)
sink
waterproof
sealant
(not supplied)
page 3 of 3
AFA
FLOW SINKS
YEAR
IT Y
E
AL
TE
QU
10
G UARA
N
REECE PRODUCT QUALITY GUARANTEE
You have purchased a quality product from Reece Pty Ltd
ABN 84 004 097 090 (“Reece”). This product is covered by
a 10 year replacement product warranty and a 12 month
warranty over spare parts and labour.
This warranty does not include faults caused by:
10 YEAR WARRANTY – DOMESTIC USE
This warranty covers faults in the product construction, material
and assembly. Products which are within 10 years from the
date of purchase, found upon inspection by an authorised
Reece representative, to be defective in construction,
material or assembly, will be repaired or exchanged with an
equivalent product free of charge. Replaced items become
Reece’s property.
• Installation or part installation by the purchaser or any person
other than a LICENSED PLUMBER or qualified tradesman
All replacement products will be available for collection without
charge to the customer at the nearest Reece branch to the
customer’s location, or elsewhere as agreed between the
customer and Reece.
Labour and Spare Parts
The labour for the replacement of products and spare parts
to which this warranty applies will be supplied by Reece or
relevant supplier using qualified tradesman engaged by Reece
or relevant supplier within 1 year from the date of purchase.
Spare parts which are within 1 year from the date of purchase
found upon inspection by an authorised Reece representative
to be defective in construction, material or assembly, will be
replaced free of charge.
Warranty Conditions
This warranty will apply only under all of the
following conditions:
• The item has been installed by a licensed plumber or has
been installed by a qualified tradesperson
• The item has been installed for and subjected to domestic
residential use only.
• Failure is due to a fault in the manufacture of the product
• Proof of purchase (including the date of purchase)
is provided
• The installation of the product is in accordance with the
instructions provided
• Incorrect installation or installation not in accordance with
the instructions provided
• Normal wear and tear
• Inadequate or complete lack of maintenance
• Chemical, electrochemical or electrical influences
• Harsh detergents or abrasive cleaners used on
product finishes
1 YEAR WARRANTY – COMMERCIAL USE
‘Commercial’ use is all use other than for normal domestic
residential purposes, including use in non-business places as in
public buildings, schools, sports centres and in establishments
that contain private bathrooms with high frequency of use by
many individuals, such as hotels, motels, retirement villages
and hospitals.
The Commercial warranty covers this product against
manufacturing faults in the construction, material and assembly
of both the finished products and any spare parts for a period
of 1 year from the date of purchase. Products and spare
parts which are found upon inspection by an authorised
Reece representative to be defective in construction, material
or assembly will be repaired or exchanged free of charge.
Replaced items become Reece’s property. The labour for the
replacement of products and spare parts to which this warranty
applies will be supplied by Reece or relevant supplier using
qualified tradesman by Reece or relevant supplier. The Warranty
Conditions and exclusions which apply to the domestic use
warranty also apply to this commercial warranty.
EXCLUSIONS
To the fullest extent permitted by law, Reece excludes all liability
for damage or injury to any person, damage to any property,
and any indirect consequential or other loss or damage.
CLAIM PROCEDURE
For all warranty queries customers are to contact the branch
where the product was purchased. These details can be found
on your purchase invoice.
Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
SINK.T1.10YR
This warranty does not cover products purchased as an
ex-display without being fully checked and tested for sale by
the manufacturer.
• Unsuitable or improper use
Don’t risk it, use a licensed plumber.™
Vivid Slimline Side Lever Sink Mixer 160mm Squareline
Page 1 of 3
HOME / VIVID SLIMLINE SIDE LEVER SINK MIXER 160MM SQUARELINE
VIVID SLIMLINE SIDE LEVER
SINK MIXER 160MM
SQUARELINE
YOU MAY
ALSO LIKE...
VS732 CHR
LEXI WALL
GLOSS
BATH
SINGLE
OUTLET
TOWEL
(210MM)
RAIL
WITH
800MM
PLATE
GS802 MB
LE777 CHR
AVAILABLE FINISHES
WAVE
VIVID
BASIN SET
SLIMLINE
7800 CHR
SHOWER
ARM &
ROSE
VS20110C
♥
ADD TO WISHLIST
LOCATE STOCKISTS
http://www.phoenixtapware.com.au/vivid-slimline-side-lever-sink-mixer-160mm-squ... 10/05/2016
Vivid Slimline Side Lever Sink Mixer 160mm Squareline
PRODUCT FEATURES
Page 2 of 3
VIVID
RUSH
SLIMLINE
WALL
OVAL
BASIN
SHOWER/WALL
OUTLET
◾ Australian designed
MIXER
180MM
VV780 MB
RU774 CHR
VIVID
MIA BASIN
SLIMLINE
MIXER
SIDE
MI770 CHR
◾ Supported by a 15 year warranty
◾ Solid brass construction with a
quality chrome finish
◾ 25mm ceramic cartridge
technology for longer life
◾ Available in gooseneck or
squareline outlet design
LEVER
◾ Available in chrome or ONIX
SINK
MIXER
matte black finish
220MM
◾ Slimline lever handles and
GOOSENECK
VS733 MB
rounded design that will suit any
modern interior
TECHNICAL INFORMATION
PRODUCT INFORMATION
RADII
SHOWER
SINGLE
ARM ONLY
TOWEL
400MM
RAIL
ROUND
600MM
SH007 CHR
ROUND
PRODUCT
CODE :
VS732 CHR
WELS RATING : 4 STAR 7.5LT/MIN
FINISH :
PRESSURE
RATING :
150 - 500kPa
PLATE
RA804 CHR
TEMPERATURE 1 - 75°C
RATING :
CHROME | ONIX AVAILABLE
MATTE BLACK SIZES :
GOOSNECK OR
SQUARELINE,
160MM OR
220MM SPOUT
WARRANTY :
15 YEAR CARTRIDGE
WARRANTY
7 YEARS REPLACEMENT
PRODUCT OR PARTS
1 YEAR REPLACEMENT
PRODUCT OR PARTS & LABOUR
DOWNLOADS
http://www.phoenixtapware.com.au/vivid-slimline-side-lever-sink-mixer-160mm-squ... 10/05/2016
Vivid Slimline Side Lever Sink Mixer 160mm Squareline
Page 3 of 3
WARRANTY
DXF
HIGH RES IMAGE
LINE DRAWING
∠ PREVIOUS
NEXT PRODUCT ∠
PRODUCT
FOOTER MENU
FAQ
NEWSLETTER
WARRANTY
WATER EFFICIENCY
CONTACT US
© Phoenix Tapware 2016
Term & Conditions
Privacy Policy
Sitemap
http://www.phoenixtapware.com.au/vivid-slimline-side-lever-sink-mixer-160mm-squ... 10/05/2016
Zen Wall Basin - 600x425mm
TECHNICAL SPECIFICATIONS
PRODUCT NO: FC15LVB01 Zen Wall Basin 600x425mm 1 Tap Hole
PRODUCT NO: FC15LVB07 Zen Wall Basin 600x425mm 3 Tap Hole
PRODUCT NO: FC15LVB01RSD Zen Wall Basin 600x425mm 1 Tap Hole. Soap Dispenser Right Hand Side
PRODUCT NO: FC15LVB01LSD Zen Wall Basin 600x425mm 1 Tap Hole. Soap Dispenser Left Hand Side
Requires 32mm overflow waste – recommended code 94238
Argent Central 1300 364 748 Brisbane (07) 3252 6101 Sydney (02) 8394 5800 Melbourne (03) 9250 1600 Perth (08) 9445 0500
www.argentaust.com.au
email: ac@argentaust.com.au Technical Advice Hotline: 1800 356 717
VIVID SLIMLINE
BASIN MIXER
PRODUCT CODE:
FINISH:
STYLISH
PREMIUM
CHROME
FINISH
MATCH WITH....
VS770 CHR
CHROME
CONTEMPORARY
DESIGN
PHOENIX
WARRANTY
TECHNICAL SPECIFICATIONS
CONSUMER INFORMATION
130
115
6.50
94
RANGE:
VIVID SLIMLINE
PRODUCT:
BASIN MIXER
PRODUCT CODE:
VS770 CHR
WATERMARK LICENCE:
WM21009
REVISION DATE:
DEC 2013
CONNECTION TYPE:
N/A
MATERIAL:
BRASS
AVAILABLE FINISHES:
CHROME. MATTE BLACK
WELS RATING:
6 STARS
FLOW RATE:
4.5 LITRES PER MINUTE
TEMPERATURE RATING:
MIN 1° - MAX 75°
PRESSURE RATING:
98
166
22
WARRANTY:
MIN 150 KPA
- MAX 500 KPA
15 YEAR REPLACEMENT
CARTRIDGE
7 YEAR REPLACEMENT
PRODUCT OR PARTS
1YEAR REPLACEMENT PARTS
OR PRODUCT & LABOUR
MERCHANT INFORMATION
40
CARTON SIZE:
L 180 x W 164MM
x H 80M
CARTON WEIGHT:
1.4 KG
OUTER BOX SIZE:
L 340MM x W 195MM
x H 410MM
OUTER BOX WEIGHT:
14 KG
OUTER BOX QUANTITY:
10 CARTONS
BARCODE NUMBER:
9320594 013 141
50
EXPLODED VIEW
7
PARTS LIST
8
11
2
1. CARTRIDGE 25MM
2. MIXER HANDLE
6
3. MIXER BODY
9
5. LOCKING NUT 25MM
21
5
1
4. ROUND MIXER PLATE
6. MIXER DOME
7. SCREW CAP M5
8. GRUB SCREW M5x5
9. O-RING
10. O-RING
11. MIXER LEVER PIN
12. BASIN MIXER SPOUT
3
13. AERATOR
14. AERATOR GASKET
15. RETAINER
12
16. M8 THREAD ROD
17. M8 NUT
14
18. MOUNTING PLATE
19. MOUNTING GASKET
13
15
20. FLEXIBLE HOSE
4
10
19
18
17
16
20
21. O-RING
INSTALLATION INSTRUCTIONS
VIVID SLIMLINE BASIN MIXER
BASIN MIXER INSTALLATION INSTRUCTION
www.phoenixtapware.com.au
WATER SUPPLY REQUIREMENTS
4. Fit mixer to basin as follows: lower fitted
1. Cut a mounting hole 35mm in diameter. There
hoses into mounting hole in basin until nut on
end of hose is below hole.
must be a minimum 12mm width of flat around the
hole.
75
150 KPa Min.
550 KPa Max.
Recommended Working
Pressure
Maximum hot water
temperature
Note:
-If the pressure exceeds or is likely to exceed 550kpa,
an approved pressure limiting device must be
installed.
- Flush out all pipe work prior to installation.
- If the water temperature exceeds 75°C, an approved
tempering valve must be fitted.
- Installation should comply with Australian standard
AS3500.1 or relevant local authority requirements.
Failure to comply with the above may void all
warranties.
Maintenance and Care
-Chrome plated surfaces should be cleaned with mild
liquid detergent or soap and water.
-Do not use cream cleaners or citrus based cleaning
products, as they are abrasive.
-Use of unsuitable cleaning agents may damage the
surface. Any damage caused in this way will not be
covered by warranty.
5. From UNDERNEATH the bench, fit "C"
2. Screw the Threaded Stud from the accessories
bag into mixer base.
Gasket and "C" Washer over Thread Stud and
both hoses.
Screw the red marked hose into mixer base "Hot
Water" hole and the blue marked hose into mixer
base "Cold Water" hole.
Screw on the Nut and “ finger-tighten”.
Secure mixer with a spanner.
Stud Hole
Hot Water
“ C ” Gasket
Threaded Stud
“ C ” Washer
Nut
Cold Water
Red Marked Hose
3. Fit 'O'ring into groove on mixer base.
Blue Marked Hose
UNDERNEATH
THE BENCH
6. Connect the water supply.
Turn on water supply and check for leaks
O ring
IN0057 revA
WARRANTY INFORMATION
MANUFACTURER’S WARRANTY
“Our goods come with a guarantee that cannot be
excluded under the Australian Consumer Law
(“ACL”), You are entitled to a replacement or refund
for a major failure and for compensation for any
reasonable or foreseeable loss or damage. You are
also entitled to have repaired or replaced if the
goods fail to be of acceptable quality and a failure
does not amount to a major failure”.
In addition to the above obligations Phoenix offers
the following Manufacturer’s Warranty subject to
the following terms and conditions. Any provision in
the warranty which is inconsistent with the ACL or is
otherwise unenforceable shall be severed from this
warranty to the extent of the inconsistency and the
remainder of the provisions shall continue to apply.
WARRANTY PERIODS
Residential
Phoenix tapware and accessories is made to the
highest industry standards and quality. Refer to
table below for warranty periods.
Catagory
Warranty
Period
Mixers
15Years
-15 Years replacement cartridge
-7Years replacement product or parts
Note: Excludes damage to ceramic
disc cartridges from pieces of copper
tube, plastic tube, sand, dirt or thread
tape etc.
-1 Year replacement product or parts
& labour.
Hand
Shower on
Rail
3Years
-3Years replacement product or parts
-1 Year replacement product or parts
and labour
Tapware &
Standard
Showers
7Years
-7Years replacement product or parts
-1Year replacement product or parts
and labour.
Note: Jumper valves and ceramic disc
spindles; 1Year parts only.
-7Years replacement product or parts
Accessories 7Years
Warranty
Details
* Note: These warranty periods apply to
products purchased after 10th April 2011.
Commercial
(Hotels, Aged Care Facilities, Hospitals, Schools,
Factories, Motels, etc.)
Catagory
All Products
Warranty
Period
1 Year
Warranty
Details
-1Year replacement product or parts
For all Service Enquiries contact below:
This Manufacturer’s Warranty is provided by Phoenix
Industries Pty Ltd.
Telephone: +61 3 9780 4200
Facsimile: + 61 3 9764 1898
Email: sales@phoenixtapware.com.au
Subject always to any overriding obligation pursuant
to the ACL, warranty shall be void for the following
reasons:
- Inability to provide proof of purchase or equivalent
documentation.
- Products not installed by a licensed plumber.
- Products not to relevant National Standards and
State Regulations.
- Products not installed in accordance with the
manufacturer’s installation instructions.
- Products exposed to environmental elements.
- Tapware exposed to water pressures and or
temperatures that exceed stated limitations.
MAXIMUM: Temperature- 75 degrees & Pressure550kPa
MINIMUM: Temperature- 1 degree & Pressure 150kPa (300kPa for Shower/Bath Diverters)
Note: AS/NSZ 3500.1-2003 (Clause 3.3.4) specifies
550kPa maximum water supply pressure at any
outlet within a building for new installations.
- Showers may not be suitable for use within:
* Gravity-fed water systems.
* Some instantaneous hot water systems.
* Pressure supply less than 150kPa.
Note: The 550kPa maximum water supply pressure
does not apply to fire service outlets.
- Isolation stop taps are not fitted as stated on
manufacturer’s installation instructions.
- Fitting of other devices to the outlet of tapware, eg.
water filters.
- Fitting of Phoenix non-approved water flow
regulating devices.
- Fitting of other devices to outlet of tap, e.g., water
filters.
- Non-installation of flow regulated check valve for
hand showers.
- Products used for incorrect applications, non
potable water etc.
- Damage as a result of obstructions due to
inadequate flushing of system before use.
- Services repairs or with non-standard replacement
parts previously undertaken without Phoenix’s
written approval.
- Damage to finishes by adhesives, sealants etc.
- Failure to clean & replace outlet aerator inserts etc.
- Damage to finishes which arise from installation or
post installation use.
- Failure to observe manufacturers care and cleaning
instructions.
- The warranty work is limited to the pre-approved
scope of work. Additional work will require author
zation from Phoenix After Sales & Services
Departments.
- Evidence cannot be produced which confirms that
the relevant product was purchased from a
Phoenix Tapware authorized distributor.
WARRANTY CONDITIONS
Phoenix Warranty covers the repair or, at Phoenix’s
option, the replacement of any products which are
defective through faulty workmanship or materials.
The warranty period commences from date of
purchase or for new buildings date of handover to a
maximum period of 6 months. The warranty period
for replacement products is limited to the expiry
date of the original purchase. The warranty is limited
to the original purchaser and non-transferable. In
order to make a warranty claim, Proof of Purchase
(POP), handover documentation for new homes or
equivalent documentation must be supplied for
warranty claims to be considered. Claims must be
processed through Phoenix’s Customer Service and
each credit claim will be issued with a claim number
which is recorded on the Phoenix system.
Phoenix will not be liable for any claims for labour,
additional products or parts associated with alleged
faulty product for work not approved in advance by
Phoenix in writing.
WARRANTY INFORMATION
WARRANTY CONDITIONS CONT.
Should any warranty claim be made and attended to
by a Phoenix authorized Service Agent and that in the
opinion of the Service Agent or Phoenix the problem
was from faulty installation or use of the goods in
conjunction with products of another manufacturer
or from some other cause other than a manufacturing
defect to the goods for which Phoenix is responsible,
Phoenix has the right to charge a service fee for each
service staff attending the Owner’s premise where
goods have been installed.
Phoenix requires adequate access to products, fittings
and fixtures to undertake warranty repairs. Phoenix
will not be responsible for any consequential damage
or costs where adequate access to product fittings
and fixtures is not accessible.
TAPWARE AND ACCESSORIES
Care and cleaning Instructions
- Under no circumstances should you install
tapware using acetone silicones.
- Never use harsh detergents, citrus based
cleaners or abrasive cleaners, as these will
scratch the surface.
- Where your tapware remains dry in use, a soft
cloth can be used to remove surface dust.
Alternatively, a wipe over with warm soapy
water is all that is required to maintain the
finish in perfect condition for a lifetime of use.
- Use of wax based furniture cream should be
avoided as these can result in a build-up of
deposits, which could detract from the
appearance.
- Do not use undue pressure and wipe in one
direction only.
Note: Phoenix reserves the right to alter, or amend
this warranty offer in writing at any time. Phoenix
reserves the right to provide minor components (eg.
handles, aerators, buttons, dress rings, hinges, clips,
rod and washers) as ‘Parts Only’ to the customer.
VIVID SLIMLINE
SHOWER/WALL MIXER
PRODUCT CODE:
FINISH:
STYLISH
PREMIUM
CHROME
FINISH
MATCH WITH....
VS780 CHR
CHROME
CONTEMPORARY
DESIGN
PHOENIX
WARRANTY
TECHNICAL SPECIFICATIONS
CONSUMER INFORMATION
110
46 REF.
80
RANGE:
VIVID SLIMLINE
PRODUCT:
SHOWER/WALL MIXER
PRODUCT CODE:
VS780 CHR
WATERMARK LICENCE:
WM21009
REVISION DATE:
DEC 2013
CONNECTION TYPE:
N/A
MATERIAL:
BRASS
AVAILABLE FINISHES:
CHROME, MATTE BLACK
WELS RATING:
N/A
FLOW RATE:
N/A
TEMPERATURE RATING:
MIN 1° - MAX 75°
PRESSURE RATING:
94
40
WARRANTY:
MIN 150 KPA
- MAX 500 KPA
15 YEAR REPLACEMENT
CARTRIDGE
7 YEAR REPLACEMENT
PRODUCT OR PARTS
1YEAR REPLACEMENT PARTS
OR PRODUCT & LABOUR
5
MERCHANT INFORMATION
6.50
CARTON SIZE:
L 185MM x W 135MM
x H 75MM
CARTON WEIGHT:
0.85 KG
OUTER BOX SIZE:
L 380MM x W 280MM
x H 390MM
OUTER BOX WEIGHT:
17 KG
OUTER BOX QUANTITY:
20 CARTONS
BARCODE NUMBER:
9320594 013 165
EXPLODED VIEW
PARTS LIST
1. WALL MIXER BODY
5
7
4
8
3
1
2
2. MIXER WALL OUTLET
3. CARTRIDGE 35MM
4. O-RING
5. MIXER HANDLE
6. MIXER LEVER PIN
7. SHOWER MIXER LOCK NUT
8. ROUND WALL PLATE
9. GRUB SCREW M5x5
10. SCREW CAP M5
6
10
9
INSTALLATION INSTRUCTIONS
VIVID SLIMLINE SOWER/WALL MIXER
SHOWER MIXER
INS TALLATION INSTRUCTIONS
www.phoenixtapware.com.au
1
Water Supply Requirements
To ensure optimum performance and customer satisfaction
please adhere to the following:
- Maximum hot water temperature 75°C.
- Recommended minimum working pressure 150kPa.
- Recommended maximum working pressure 500kPa.
3
Create a 50mm round hole in cement sheet
and tiles.
Screw the shower mixer
assembly in place.
Shower Mixer Assembly
Remove the protective cover.
Push on the dress plate.
If the water pressure exceeds or is likely to exceed 500kPa, an
approved pressure limiting valve must be fitted.
- Flush out all pipe work prior to installation.
- If the water temperature exceeds 75°C an approved
tempering valve must be fitted.
- Installation should comply with Australian standard AS3500.1
or relevant local authority requirements.
Push on the mixer handle and tighten with
the grub screw.
Do not remove
the protective
cover until final
fit-off.
Failure to comply with the above may void all warranties. For
details on Phoenix’s warranty policy refer to
www.phoenixtapware.com.au
Maintenance and Care
Do not use cleaning agents containing a corrosive acid or
scouring agent. Do not use cream cleaners, as they are
abrasive. Surfaces should only be cleaned with a cloth and
clear water of mild liquid detergent. Use of unsuitable cleaning
agents may damage the surface.
Dress Plate
2
Mixer Handle
Attach water supply and water outlet
TEST AND CHECK FOR LEAKS
45mm to 64mm
Adjustment
SHOWER
HOT
Stud
Cement sheet and Tiles
IN0108 revA
COLD
Grub Screw
WARRANTY INFORMATION
MANUFACTURER’S WARRANTY
“Our goods come with a guarantee that cannot be
excluded under the Australian Consumer Law
(“ACL”), You are entitled to a replacement or refund
for a major failure and for compensation for any
reasonable or foreseeable loss or damage. You are
also entitled to have repaired or replaced if the
goods fail to be of acceptable quality and a failure
does not amount to a major failure”.
In addition to the above obligations Phoenix offers
the following Manufacturer’s Warranty subject to
the following terms and conditions. Any provision in
the warranty which is inconsistent with the ACL or is
otherwise unenforceable shall be severed from this
warranty to the extent of the inconsistency and the
remainder of the provisions shall continue to apply.
WARRANTY PERIODS
Residential
Phoenix tapware and accessories is made to the
highest industry standards and quality. Refer to
table below for warranty periods.
Catagory
Warranty
Period
Mixers
15Years
-15 Years replacement cartridge
-7Years replacement product or parts
Note: Excludes damage to ceramic
disc cartridges from pieces of copper
tube, plastic tube, sand, dirt or thread
tape etc.
-1 Year replacement product or parts
& labour.
Hand
Shower on
Rail
3Years
-3Years replacement product or parts
-1 Year replacement product or parts
and labour
Tapware &
Standard
Showers
7Years
-7Years replacement product or parts
-1Year replacement product or parts
and labour.
Note: Jumper valves and ceramic disc
spindles; 1Year parts only.
-7Years replacement product or parts
Accessories 7Years
Warranty
Details
* Note: These warranty periods apply to
products purchased after 10th April 2011.
Commercial
(Hotels, Aged Care Facilities, Hospitals, Schools,
Factories, Motels, etc.)
Catagory
All Products
Warranty
Period
1 Year
Warranty
Details
-1Year replacement product or parts
For all Service Enquiries contact below:
This Manufacturer’s Warranty is provided by Phoenix
Industries Pty Ltd.
Telephone: +61 3 9780 4200
Facsimile: + 61 3 9764 1898
Email: sales@phoenixtapware.com.au
Subject always to any overriding obligation pursuant
to the ACL, warranty shall be void for the following
reasons:
- Inability to provide proof of purchase or equivalent
documentation.
- Products not installed by a licensed plumber.
- Products not to relevant National Standards and
State Regulations.
- Products not installed in accordance with the
manufacturer’s installation instructions.
- Products exposed to environmental elements.
- Tapware exposed to water pressures and or
temperatures that exceed stated limitations.
MAXIMUM: Temperature- 75 degrees & Pressure550kPa
MINIMUM: Temperature- 1 degree & Pressure 150kPa (300kPa for Shower/Bath Diverters)
Note: AS/NSZ 3500.1-2003 (Clause 3.3.4) specifies
550kPa maximum water supply pressure at any
outlet within a building for new installations.
- Showers may not be suitable for use within:
* Gravity-fed water systems.
* Some instantaneous hot water systems.
* Pressure supply less than 150kPa.
Note: The 550kPa maximum water supply pressure
does not apply to fire service outlets.
- Isolation stop taps are not fitted as stated on
manufacturer’s installation instructions.
- Fitting of other devices to the outlet of tapware, eg.
water filters.
- Fitting of Phoenix non-approved water flow
regulating devices.
- Fitting of other devices to outlet of tap, e.g., water
filters.
- Non-installation of flow regulated check valve for
hand showers.
- Products used for incorrect applications, non
potable water etc.
- Damage as a result of obstructions due to
inadequate flushing of system before use.
- Services repairs or with non-standard replacement
parts previously undertaken without Phoenix’s
written approval.
- Damage to finishes by adhesives, sealants etc.
- Failure to clean & replace outlet aerator inserts etc.
- Damage to finishes which arise from installation or
post installation use.
- Failure to observe manufacturers care and cleaning
instructions.
- The warranty work is limited to the pre-approved
scope of work. Additional work will require author
zation from Phoenix After Sales & Services
Departments.
- Evidence cannot be produced which confirms that
the relevant product was purchased from a
Phoenix Tapware authorized distributor.
WARRANTY CONDITIONS
Phoenix Warranty covers the repair or, at Phoenix’s
option, the replacement of any products which are
defective through faulty workmanship or materials.
The warranty period commences from date of
purchase or for new buildings date of handover to a
maximum period of 6 months. The warranty period
for replacement products is limited to the expiry
date of the original purchase. The warranty is limited
to the original purchaser and non-transferable. In
order to make a warranty claim, Proof of Purchase
(POP), handover documentation for new homes or
equivalent documentation must be supplied for
warranty claims to be considered. Claims must be
processed through Phoenix’s Customer Service and
each credit claim will be issued with a claim number
which is recorded on the Phoenix system.
Phoenix will not be liable for any claims for labour,
additional products or parts associated with alleged
faulty product for work not approved in advance by
Phoenix in writing.
WARRANTY INFORMATION
WARRANTY CONDITIONS CONT.
Should any warranty claim be made and attended to
by a Phoenix authorized Service Agent and that in the
opinion of the Service Agent or Phoenix the problem
was from faulty installation or use of the goods in
conjunction with products of another manufacturer
or from some other cause other than a manufacturing
defect to the goods for which Phoenix is responsible,
Phoenix has the right to charge a service fee for each
service staff attending the Owner’s premise where
goods have been installed.
Phoenix requires adequate access to products, fittings
and fixtures to undertake warranty repairs. Phoenix
will not be responsible for any consequential damage
or costs where adequate access to product fittings
and fixtures is not accessible.
TAPWARE AND ACCESSORIES
Care and cleaning Instructions
- Under no circumstances should you install
tapware using acetone silicones.
- Never use harsh detergents, citrus based
cleaners or abrasive cleaners, as these will
scratch the surface.
- Where your tapware remains dry in use, a soft
cloth can be used to remove surface dust.
Alternatively, a wipe over with warm soapy
water is all that is required to maintain the
finish in perfect condition for a lifetime of use.
- Use of wax based furniture cream should be
avoided as these can result in a build-up of
deposits, which could detract from the
appearance.
- Do not use undue pressure and wipe in one
direction only.
Note: Phoenix reserves the right to alter, or amend
this warranty offer in writing at any time. Phoenix
reserves the right to provide minor components (eg.
handles, aerators, buttons, dress rings, hinges, clips,
rod and washers) as ‘Parts Only’ to the customer.
page 1 of 2
MIZU & POSH
WASTES AND TRAPS
SPECIFICATIONS
Recommended use
Domestic, hotel and commercial
Colour availability
Various
Standards
AS 1589
ATS 5200.040
CLEANING RECOMMENDATIONS
We recommend the use of soapy water or approved cleaners. For difficult to
remove spots and marks, wet a soft cloth and gently wipe. This product should
not be cleaned with abrasive materials. Damage caused by any improper
treatment is not covered by the product warranty - refer to Warranty Conditions
on the last page.
AS 1589
WMKT 21011
ATS 5200.040
WMKT 20026
Disclaimer: Products in this specification manual must by regulation be installed
by licensed and registered trade people. The manufacturer/distributor reserves
the right to vary specifications or delete models from their range without prior
notification. Dimensions are nominal measurements only. Dimensions and set-outs
listed are correct at time of publication however the manufacturer/distributor takes
no responsibility for printing errors.
Tech Page Version 1
To see the complete Mizu or Posh range go to
www.reece.com.au/bathrooms
QU
AL
1
YEAR
IT Y
TE
MIZU & POSH
WASTES AND TRAPS
E
page 2 of 2
G UARA
N
REECE PRODUCT QUALITY GUARANTEE
You have purchased a quality product from Reece Pty Ltd
ABN 84 004 097 090 (“Reece”). This product is covered by a
1 year replacement product warranty and a 12 month warranty
over spare parts and labour.
This warranty does not include faults caused by:
1 YEAR WARRANTY – DOMESTIC USE
This warranty covers faults in the product construction, material
and assembly. Products which are within 1 year from the date
of purchase, found upon inspection by an authorised Reece
representative, to be defective in construction, material or
assembly, will be repaired or exchanged with an equivalent
product free of charge. Replaced items become Reece’s
property. This warranty also covers any spare parts included
under “Manufacturer’s Provisions” below.
• Installation or part installation by the purchaser or any person
other than a LICENSED PLUMBER
All replacement products will be available for collection without
charge to the customer at the nearest Reece branch to the
customer’s location, or elsewhere as agreed between the
customer and Reece.
Labour and Spare Parts
The labour for the replacement of products and spare parts
to which this warranty applies will be supplied by Reece or
relevant supplier using licensed plumbers engaged by Reece or
relevant supplier within 1 year from the date of purchase.
Spare parts other than those listed in the Manufacturer’s
Provisions above, which are within 1 year from the date of
purchase found upon inspection by an authorised Reece
representative to be defective in construction, material or
assembly, will be replaced free of charge.
Warranty Conditions
This warranty will apply only under all of the
following conditions:
• The item has been installed by a licensed plumber
• The item has been installed for and subjected to domestic
residential use only
• Failure is due to a fault in the manufacture of the product
• Proof of purchase (including the date of purchase)
is provided
• The installation of the product is in accordance with the
instructions provided
• Incorrect installation or installation not in accordance with
the instructions provided
• Normal wear and tear
• Inadequate or complete lack of maintenance
• Chemical, electrochemical or electrical influences
• Harsh detergents or abrasive cleaners used on
product finishes
1 YEAR WARRANTY – COMMERCIAL USE
‘Commercial’ use is all use other than for normal domestic
residential purposes, including use in non-business places as in
public buildings, schools, sports centres and in establishments
that contain private bathrooms with high frequency of use by
many individuals, such as hotels, motels, retirement villages
and hospitals.
The Commercial warranty covers this product against
manufacturing faults in the construction, material and assembly
of both the finished products and any spare parts for a period
of 1 year from the date of purchase. Products and spare
parts which are found upon inspection by an authorised
Reece representative to be defective in construction, material
or assembly will be repaired or exchanged free of charge.
Replaced items become Reece’s property. The labour for the
replacement of products and spare parts to which this warranty
applies will be supplied by Reece or relevant supplier using
licensed plumbers engaged by Reece or relevant supplier.
The Warranty Conditions and exclusions which apply to the
domestic use warranty also apply to this commercial warranty.
EXCLUSIONS
To the fullest extent permitted by law, Reece excludes all liability
for damage or injury to any person, damage to any property,
and any indirect consequential or other loss or damage.
CLAIM PROCEDURE
For all warranty queries customers are to contact the branch
where the product was purchased. These details can be found
on your purchase invoice.
Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
TAP.T1.1YR
This warranty does not cover products purchased as an
ex-display without being fully checked and tested for sale by
the manufacturer.
• Unsuitable or improper use
Don’t risk it, use a licensed plumber.™
page 1 of 6
ROCA
Victoria Close Coupled
toilet Suite
370
370
160
160
177
120
40
ø63
655
425
90
150 min.
x 40 min.
385
355
40
371
4,5 l
165
177
120
4,5 l
165
ø63
425
390
15
90
655
385
180
160
240
371
355
160
220
140
270
535
390
ø150 min. ø102
40 min.
60
105
350
118
Dimensions are nominal only
SPECIFICATION
Rim Configuration
Box Rim
Bowl Configuration
Available in P and S Trap
Set Out
P Trap: 180mm, S Trap: 140mm
Pan Fixing
Screwed to the floor and bedded with sealant
Cistern Fixing
Bolted directly to bowl
Seat
Standard and soft-close matching seats
available
Water Inlet
Bottom inlet, right hand side
Cistern
4.5/3 litre dual flush
Inlet Valve
Recommended max. working pressure 1000kPa
WELS
4 Star WELS Rating
Standards
AS1172.1 and AS 1172.2
To see the complete Roca range go to
www.reece.com.au/bathrooms
Cleaning Recommendations
FEATURES
Recommended Use
Domestic, hotel and commercial
Weight
S Trap pan: 20.4kg, P Trap
pan: 17.8kg, Cistern: 12.6kg
Soapy water or approved bathroom cleaners.
This bathroom product should not be cleaned
with abrasive materials. Damage caused by
any improper treatment is not covered by the
product warranty. Refer to Warranty Conditions
on the last page.
The more
stars the more
water efficient
A joint government and industry program
Licence No.0092
4.5
litres per full flush
3
litres per half flush
3.5 litres per average flush
when tested in accordance with standard AS/NZS6400
For more information and to compare
products refer to:
WMKA
02321
Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered
trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from
their range without prior notification. Dimensions and set-outs listed are correct at time of publication
however the manufacturer/distributor takes no responsibility for printing errors.
Tech Page Version 1
page 2 of 6
ROCA
Victoria Close Coupled toilet Suite
INSTALLATION
VICTORIA
R 1/2”
R 1/2”
180
140
Plumbers, please ensure a copy of the installation
instructions is left with the end user for future reference
225
page 3 of 6
ROCA
Victoria Close Coupled toilet Suite
INSTALLATION
1
2
Ø8
3
15
5
6
15
7
8
9
16
10
11
12
4
11
Plumbers, please ensure a copy of the installation
instructions is left with the end user for future reference
page 4 of 6
ROCA
Victoria Close Coupled toilet Suite
INSTALLATION
14
15
15
16
17
Plumbers, please ensure a copy of the installation
instructions is left with the end user for future reference
page 5 of 6
ROCA
Victoria Close Coupled toilet Suite
Maintenance
V
Plumbers, please ensure a copy of the installation
instructions is left with the end user for future reference
QU
AL
7
YEAR
IT Y
TE
ROCA
Victoria Close Coupled toilet Suite
E
page 6 of 6
G UARA
N
REECE PRODUCT QUALITY GUARANTEE
You have purchased a quality product from Reece Pty Ltd
ABN 84 004 097 090 (“Reece”). This product is covered by
a 7 year replacement product warranty and a 12 month
warranty over spare parts and labour.
This warranty does not include faults caused by:
7 YEAR WARRANTY – DOMESTIC USE
This warranty covers faults in the product construction, material
and assembly. Products which are within 7 years from the
date of purchase, found upon inspection by an authorised
Reece representative, to be defective in construction,
material or assembly, will be repaired or exchanged with an
equivalent product free of charge. Replaced items become
Reece’s property.
• Installation or part installation by the purchaser or any person
other than a LICENSED PLUMBER
All replacement products will be available for collection without
charge to the customer at the nearest Reece branch to the
customer’s location, or elsewhere as agreed between the
customer and Reece.
Labour and Spare Parts
The labour for the replacement of products and spare parts
to which this warranty applies will be supplied by Reece or
relevant supplier using licensed plumbers engaged by Reece or
relevant supplier within 1 year from the date of purchase.
Spare parts (includes the toilet seat) other which are within 1
year from the date of purchase found upon inspection by an
authorised Reece representative to be defective in construction,
material or assembly, will be replaced free of charge.
Warranty Conditions
This warranty will apply only under all of the
following conditions:
• The item has been installed by a licensed plumber
• The item has been installed for and subjected to domestic
residential use only
• Failure is due to a fault in the manufacture of the product
• Proof of purchase (including the date of purchase)
is provided
• The installation of the product is in accordance with the
instructions provided
This warranty does not cover products purchased as an
ex-display without being fully checked and tested for sale by
the manufacturer.
• Unsuitable or improper use
• Incorrect installation or installation not in accordance with
the instructions provided
• Normal wear and tear
• Inadequate or complete lack of maintenance
• Chemical, electrochemical or electrical influences
• Harsh detergents or abrasive cleaners used on
product finishes
1 YEAR WARRANTY – COMMERCIAL USE
‘Commercial’ use is all use other than for normal domestic
residential purposes, including use in non-business places as in
public buildings, schools, sports centres and in establishments
that contain private bathrooms with high frequency of use by
many individuals, such as hotels, motels, retirement villages
and hospitals.
The Commercial warranty covers this product against
manufacturing faults in the construction, material and assembly
of both the finished products and any spare parts for a period
of 1 year from the date of purchase. Products and spare
parts which are found upon inspection by an authorised
Reece representative to be defective in construction, material
or assembly will be repaired or exchanged free of charge.
Replaced items become Reece’s property. The labour for the
replacement of products and spare parts to which this warranty
applies will be supplied by Reece or relevant supplier using
licensed plumbers engaged by Reece or relevant supplier.
The Warranty Conditions and exclusions which apply to the
domestic use warranty also apply to this commercial warranty.
EXCLUSIONS
To the fullest extent permitted by law, Reece excludes all liability
for damage or injury to any person, damage to any property,
and any indirect consequential or other loss or damage.
CLAIM PROCEDURE
For all warranty queries customers are to contact the branch
where the product was purchased. These details can be found
on your purchase invoice.
TOILET.T1.7YR
Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Don’t risk it, use a licensed plumber.™
25
539
645
36
115
34
44
113
Vivid
The more
stars the more
water efficient
WATER
RATING
Hand Shower On Rail
A joint government and industry program
Licence No. 0133
Part Code:
Available Finishes:
www.phoenixtapware.com.au
V685
Chrome
8
150 KPa Min.
550 KPa Max.
75
litres per minute
When tested in accordance with Standard AS/NZS 6400
www.waterrating.gov.au
Recommended working pressure
Note: If the pressure Exceeds or is likely to exceed 550KPa,
an approved pressure limiting device must be fitted.
Maximum hot water
temperature
66
24
16
22
79
54
10
138
Radii
Single Toilet Roll Holder (Round)
Part Code:
Available Finishes:
www.phoenixtapware.com.au
RA892
Chrome
24
54
16
79
66
10
600
Radii
Round Single Towel Rail
(600mm)
Part Code:
Available Finishes:
www.phoenixtapware.com.au
RA804
Chrome
page 1 of 2
BASE
LAUNDRY TROUGH AND CABINETS
5
45
55
5
50
0
60
11
85
435
435
870
870
85
55
0
55
11
0
45
495
Mini Laundry Trough and Cabinet
0
60
Double Laundry Trough and Cabinet
0
50
50
0
60
0
85
435
435
870
870
85
49
5
59
5
5
59
Laundry Trough and Cabinet
5
49
Compact Laundry Trough and Cabinet
SPECIFICATIONS
Recommended use
Domestic, hotel, and commercial
Material
304 Grade Stainless Steel
Cabinet finish
Powder coated
Thickness / Gauge
0.8mm
Waste
90mm basket waste
Bowl depth / capacity
Mini Laundry Trough and Cabinet - 200mm / 32 litres
Laundry Trough and Cabinet - 225mm / 42 litres
Compact Laundry Trough and Cabinet - 225mm / 42 litres
Double Laundry Trough and Cabinet - 225mm / 42 litres (x2)
Taphole option
1 taphole
Features
Reversible door
Sound deadening pads
Reversible bypass kit and stainless steel blanking cap cover
included
Side bypass suitable for washing machine inlet and outlet hoses
CLEANING RECOMMENDATIONS
We recommend the use of soapy water or approved cleaners.
This product should not be cleaned with abrasive materials.
Damage caused by any improper treatment is not covered by the product warrantyrefer to Warranty Conditions on the last page.
Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people.
The manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior
notification. Dimensions are nominal measurements only. Dimensions and set-outs listed are correct at time of publication
however the manufacturer/distributor takes no responsibility for printing errors.
Tech Page Version 2
Close up of bypass cover on side panels
To see the complete Base range go to
www.reece.com.au/bathrooms
QU
AL
1
YEAR
IT Y
TE
BASE
LAUNDRY TROUGH AND CABINETS
E
page 2 of 2
G UARA
N
REECE PRODUCT QUALITY GUARANTEE
You have purchased a quality product from Reece Pty Ltd
ABN 84 004 097 090 (“Reece”). This product is covered by a
1 year replacement product warranty and a 12 month warranty
over spare parts and labour.
This warranty does not include faults caused by:
1 YEAR WARRANTY – DOMESTIC USE
This warranty covers faults in the product construction, material
and assembly. Products which are within 1 year from the
date of purchase, found upon inspection by an authorised
Reece representative, to be defective in construction,
material or assembly, will be repaired or exchanged with an
equivalent product free of charge. Replaced items become
Reece’s property.
• Installation or part installation by the purchaser or any person
other than a LICENSED PLUMBER or qualified tradesman
All replacement products will be available for collection without
charge to the customer at the nearest Reece branch to the
customer’s location, or elsewhere as agreed between the
customer and Reece.
Labour and Spare Parts
The labour for the replacement of products and spare parts
to which this warranty applies will be supplied by Reece or
relevant supplier using qualified tradesman engaged by Reece
or relevant supplier within 1 year from the date of purchase.
Spare parts which are within 1 year from the date of purchase
found upon inspection by an authorised Reece representative
to be defective in construction, material or assembly, will be
replaced free of charge.
Warranty Conditions
This warranty will apply only under all of the
following conditions:
• The item has been installed by a licensed plumber or has
been installed by a qualified tradesperson
• The item has been installed for and subjected to domestic
residential use only.
• Failure is due to a fault in the manufacture of the product
• Proof of purchase (including the date of purchase)
is provided
• The installation of the product is in accordance with the
instructions provided
• Incorrect installation or installation not in accordance with
the instructions provided
• Normal wear and tear
• Inadequate or complete lack of maintenance
• Chemical, electrochemical or electrical influences
• Harsh detergents or abrasive cleaners used on
product finishes
1 YEAR WARRANTY – COMMERCIAL USE
‘Commercial’ use is all use other than for normal domestic
residential purposes, including use in non-business places as in
public buildings, schools, sports centres and in establishments
that contain private bathrooms with high frequency of use by
many individuals, such as hotels, motels, retirement villages
and hospitals.
The Commercial warranty covers this product against
manufacturing faults in the construction, material and assembly
of both the finished products and any spare parts for a period
of 1 year from the date of purchase. Products and spare
parts which are found upon inspection by an authorised
Reece representative to be defective in construction, material
or assembly will be repaired or exchanged free of charge.
Replaced items become Reece’s property. The labour for the
replacement of products and spare parts to which this warranty
applies will be supplied by Reece or relevant supplier using
qualified tradesman by Reece or relevant supplier. The Warranty
Conditions and exclusions which apply to the domestic use
warranty also apply to this commercial warranty.
EXCLUSIONS
To the fullest extent permitted by law, Reece excludes all liability
for damage or injury to any person, damage to any property,
and any indirect consequential or other loss or damage.
CLAIM PROCEDURE
For all warranty queries customers are to contact the branch
where the product was purchased. These details can be found
on your purchase invoice.
Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
SINK.T1.1YR
This warranty does not cover products purchased as an
ex-display without being fully checked and tested for sale by
the manufacturer.
• Unsuitable or improper use
Don’t risk it, use a licensed plumber.™
page 1 of 3
BASE MKII
SINK MIXER
SPECIFICATIONS
Recommended use
Domestic, hotel and commercial
Colour availability
Chrome
Pressure rating
Maximum continuous operating pressure
1000kPa.
Note: As per AS/NZS 3500 pressure must be
limited to 500kPa on any new home, extension
or renovation.
Note: For best performance and longer life we
recommend an operating pressure between
150-500 kPa
Temperature rating
Maximum continuous working temperature 80°
WELS
Stars 4
Flow Rate 7.5 L/min
Suitable Hot Water Units
Storage tank: Yes
Continuous Flow: Yes
Gravity Feed: Not suitable.
Standards
AS/NZS 3718
CLEANING RECOMMENDATIONS
This product should not be cleaned with abrasive materials
eg. steel wool/scourers. Do not use any corrosive or abrasive
cleaning agents containing acids or scouring agents. Bleaches
can also discolour products and therefore should not be used.
Damage caused by any improper treatment is not covered by the
product warranty- refer to Warranty Conditions on the last page.
The more
stars the more
water efficient
WATER
RATING
A joint government and industry program
Licence No. 1238
7.5
litres per minute
When tested at 150, 250 & 350kPa
When tested in accordance with Standard AS/NZS 6400
www.waterrating.gov.au
WMKA
22094
Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered
trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from
their range without prior notification. Dimensions are nominal measurements only. Dimensions and set-outs
listed are correct at time of publication however the manufacturer/distributor takes no responsibility for
printing errors.
Tech Page Version 1
page 2 of 3
BASE MKII
SINK MIXER
INSTALLATION
4. Place the washer into position.
Note
5. Fit the tap body (10) into the sink hole making sure first that the
flexible connectors (19,20) are firmly tightened into the base of the
body.
The installation must comply with requirements AS/NZS 3500.
Mixer must be installed by a licenced plumber.
Important
Your mixer comes to you already factory assembled and tested.
We do not recommend the dismantling of any internal part of
the mixer. The mixers are factory tested and sealed so as to
give the best performace.
1. Please flush out new pipe work prior to connecting the new
mixer.
2. All mixers should be installed with isolating stop cocks (Arco
brand recommended).
3. This tap is suitable for high pressure applications where both
hot and cold water supply pressures are at 150kPa or above.
6. Do not use teflon tap on threads.
7. From underneath apply your washer (15) prior to positioning the
horse shoe plate (16).
8. Lock the mixer onto the sink or benchtop by tightening the lock
nut s(18).
Servicing - Replacement of Cartridge
1. Remove cap (3) and unscrew the grub screw (2) using allen
key.
2. Lift off handle and remove the cartridge dome (4), unscrew
brass locking nut (5) and lift out cartridge (6).
3. Replace the cartridge (6), replace the brass locking nut (5),
cartridge dome (4) and replace handle (1). Tighten grub screw (3)
and push in indicator cap (2).
Exploded View
Item Description Product Code
1-3. Sink Mixer Handle Complete
9502420
4. Cartridge Dome
5. Cartridge Lock Nut
6. Cartridge9502422
7-12.Mixer Body
Plumbers, please ensure a copy of the installation
instructions is left with the end user for future reference
13. Aerator Complete
9502423
14-18. Sink Mixer Fixing Kit
9502427
19. Flexible Hose (Hot)
9502424
20. Flexible Hose (Cold)
9502425
QU
AL
1
YEAR
IT Y
TE
BASE MKII
SINK MIXER
E
page 3 of 3
G UARA
N
REECE PRODUCT QUALITY GUARANTEE
You have purchased a quality product from Reece Pty Ltd
ABN 84 004 097 090 (“Reece”). This product is covered by a
1 year replacement product warranty and a 12 month warranty
over spare parts and labour.
This warranty does not include faults caused by:
1 YEAR WARRANTY – DOMESTIC USE
This warranty covers faults in the product construction, material
and assembly. Products which are within 1 year from the date
of purchase, found upon inspection by an authorised Reece
representative, to be defective in construction, material or
assembly, will be repaired or exchanged with an equivalent
product free of charge. Replaced items become Reece’s
property. This warranty also covers any spare parts included
under “Manufacturer’s Provisions” below.
• Installation or part installation by the purchaser or any person
other than a LICENSED PLUMBER
All replacement products will be available for collection without
charge to the customer at the nearest Reece branch to the
customer’s location, or elsewhere as agreed between the
customer and Reece.
Labour and Spare Parts
The labour for the replacement of products and spare parts
to which this warranty applies will be supplied by Reece or
relevant supplier using licensed plumbers engaged by Reece or
relevant supplier within 1 year from the date of purchase.
Spare parts other than those listed in the Manufacturer’s
Provisions above, which are within 1 year from the date of
purchase found upon inspection by an authorised Reece
representative to be defective in construction, material or
assembly, will be replaced free of charge.
Warranty Conditions
This warranty will apply only under all of the
following conditions:
• The item has been installed by a licensed plumber
• The item has been installed for and subjected to domestic
residential use only
• Failure is due to a fault in the manufacture of the product
• Proof of purchase (including the date of purchase)
is provided
• The installation of the product is in accordance with the
instructions provided
• Incorrect installation or installation not in accordance with
the instructions provided
• Normal wear and tear
• Inadequate or complete lack of maintenance
• Chemical, electrochemical or electrical influences
• Harsh detergents or abrasive cleaners used on
product finishes
1 YEAR WARRANTY – COMMERCIAL USE
‘Commercial’ use is all use other than for normal domestic
residential purposes, including use in non-business places as in
public buildings, schools, sports centres and in establishments
that contain private bathrooms with high frequency of use by
many individuals, such as hotels, motels, retirement villages
and hospitals.
The Commercial warranty covers this product against
manufacturing faults in the construction, material and assembly
of both the finished products and any spare parts for a period
of 1 year from the date of purchase. Products and spare
parts which are found upon inspection by an authorised
Reece representative to be defective in construction, material
or assembly will be repaired or exchanged free of charge.
Replaced items become Reece’s property. The labour for the
replacement of products and spare parts to which this warranty
applies will be supplied by Reece or relevant supplier using
licensed plumbers engaged by Reece or relevant supplier.
The Warranty Conditions and exclusions which apply to the
domestic use warranty also apply to this commercial warranty.
EXCLUSIONS
To the fullest extent permitted by law, Reece excludes all liability
for damage or injury to any person, damage to any property,
and any indirect consequential or other loss or damage.
CLAIM PROCEDURE
For all warranty queries customers are to contact the branch
where the product was purchased. These details can be found
on your purchase invoice.
Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
TAP.T1.1YR
This warranty does not cover products purchased as an
ex-display without being fully checked and tested for sale by
the manufacturer.
• Unsuitable or improper use
Don’t risk it, use a licensed plumber.™
Arco Lever Handle Wash Stop from Reece
Page 1 of 2
http://www.reece.com.au/bathrooms/products/arco-lever-handle-wash-stop-100831
10/05/2016
DURA
VALVES
REECE PRODUCT QUALITY GUARANTEE
You have purchased a quality product from Reece Pty Ltd
ABN 84 004 097 090 (“Reece”). This product is covered by a
12 month product warranty.
12 MONTH WARRANTY
This warranty covers faults in the product construction, material
and assembly. Products which are within 12 months from the
date of purchase, found upon inspection by an authorised
Reece representative, to be defective in construction,
material or assembly, will be repaired or exchanged with an
equivalent product free of charge. Replaced items become
Reece’s property.
All replacement products will be available for collection without
charge to the customer at the nearest Reece branch to the
customer’s location, or elsewhere as agreed between the
customer and Reece.
Warranty Conditions
This warranty will apply only under all of the following
conditions:
• The item has been installed by a licensed plumber
• Failure is due to a fault in the manufacture of the product
• Proof of purchase (including the date of purchase) is
provided
• The installation of the product is in accordance with the
instructions provided
This warranty does not cover products purchased as an
ex-display without being fully checked and tested for sale by
the manufacturer.
G UARA
N
This warranty does not include faults caused by:
• Unsuitable or improper use
• Incorrect installation or installation not in accordance with
the instructions provided
• Installation or part installation by the purchaser or any person
other than a LICENSED PLUMBER or tradesperson licensed
to install this product.
• Normal wear and tear
• Inadequate or complete lack of maintenance
• Chemical, electrochemical or electrical influences
• Harsh detergents or abrasive cleaners used on product
finishes
EXCLUSIONS
To the fullest extent permitted by law, Reece excludes all liability
for damage or injury to any person, damage to any property,
and any indirect consequential or other loss or damage.
CLAIM PROCEDURE
For all warranty queries customers are to contact the branch
where the product was purchased. These details can be found
on your purchase invoice.
Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Plumbers/Contractors, please ensure a copy of the installation
instructions is left with the end user for future reference.
Don’t risk it, use a licensed plumber.™
MONTHS
IT Y
E
AL
TE
QU
12
Data Sheet
DHCE 6/50
Instantaneous Single Phase Electric Water Heater
Delivers hot water not exceeding 50°Celsius
in accordance with AS3498*
The advantages
› Electronically controlled to save energy and water
› Temperature selection up to a maximum of 50°Celsius in
accordance with AS3498*
› No external temperature control device required*
› Ideal for low flow applications with a switch on flow rate of only
1.5L/min
› Three selectable temperatures for greater convenience, note that
output temperature will be impacted by cold water inlet
temperature
› ● : 40°C
› ●● : 45°C
› ●●● : 50°C
› No flue, ventilation or safe tray required
› Compact design for space saving installation flexibility
› Available in electrical size:
› DHCE 6/50 - 7.1kW, 30 Amps per phase, single phase 240V
› WaterMark approved, licence number WMKA21273, AS3498
50˚C
Ideal installation areas^
› Basin
*This appliance delivers hot water not exceeding 50°Celsius in accordance with AS3498. Refer to AS/NZS3500.4, local requirements and installation instructions to
determine if additional delivery temperature control is required.
^Dependent on model selected
Free Call 1800 153 351 | www.stiebel.com.au
01 | 02
Data Sheet DHCE 6/50 AUG 2015
For more information on the right Stiebel Eltron water heater for
your project please contact our Technical Services Department on
free call 1800 153 351 (Australia).
Data Sheet
DHCE 6/50
Instantaneous Single Phase Electric Water Heater
Delivers hot water not exceeding 50°Celsius
in accordance with AS3498*
SINGLE PHASE ELECTRIC
Model number
DHCE 6/50
Rated output (240V)
7.1kW
Rated current (240V)
30 Amp
Phases
1/N/PE/AC 220..240V
Electrical installation
As per AS/NZS3000
Installation requirements
AS/NZS3500.4.2 & local requirements
Switch on flow rate
1.5 L/min
Permissible operating pressure
1000 kPa
Temperature adjustment
●40˚C ●● 45˚C ●●● 50˚C
IP Rating
IP25
Height
360 mm
Width
200 mm
Depth
110 mm
Weight (filled with water)
2.45 kg
Colour
silver look
Nominal capacity
0.45L
Approvals
WaterMark Lic No. WMKA21273. AS3498
Equipment
For one/several draw off points
Yes/No
Heating system
Tubular
Electronic flow rate control
-
Electronic air detection system
-
Accepts pre-heated water (solar)
-
Programmable temperature
-
Wellness shower programs
-
ECO energy & water function
-
Optional accessories
Radio remote control primary
-
Radio remote control secondary
-
Selecting the right Stiebel Eltron instantaneous water heater
Thank you for considering the Stiebel Eltron instantaneous water
heater, with over 90 years of hot water technology experience
we are sure you will be happy with your choice of a Stiebel Eltron
instantaneous water heater.
The temperature rise table will assist you in determining the
appropriate size of instantaneous water heater required for your
application. The required temperatures at specific flow rates
will determine the size of system needed. Our customer support
representatives can be contacted on our free call number 1800 153
351 to assist in selecting the appropriate system/systems for your
project.
Installation close to the point of use
The Stiebel Eltron DHCE instant water heaters compact design allows
for ease of installation close to the point of use. In order to minimise
thermal losses in the pipe work the water heater should be installed
as close to the point of use as possible.
Electrical installation
This water heater must be installed in accordance with AS/NZS3000
electrical regulations by a qualified installer.
Plumbing installation
This water heater must be installed in accordance with AS/NZS3500.4.2
and local authority regulations by a qualified installer.
Warranty
For full warranty information please visit www.stiebel.com.au.
Technical Support
Stiebel Eltron (Aust) Pty Ltd
Free Call (Australia): 1800 153 351
Telephone: (03) 9645 1833
Website: stiebel.com.au
DHCE 6/50 instantaneous single phase electric water heater
12L/min
-
14L/min
^Please note temperature rise is based on connection to 240V.
Our customer support representatives can be contacted on our free call number
1800 153 351 to assist in selecting the appropriate system/systems for your project.
G1/2
35 mm
110 mm.
100 mm
200 mm
Hot water outlet
Cold water inlet
STIEBEL ELTRON is committed to our policy of continual improvement, some features may have subsequently been changed or even removed. Our advisors will be happy
to consult with you regarding the currently applicable equipment features. The images used in this brochure are for reference only.
Free Call 1800 153 351 | www.stiebel.com.au
01 | 02
Data Sheet DHCE 6/50 AUG 2015
-
G1/2
13°C
10L/min
270 mm.
360 mm.
16°C
8L/min
264 mm.
25°C
6L/min
280 mm.
4L/min
65 mm
9 mm.
Add the below temperature to the cold water inlet temperature. Temperature
will also be dependent on the output dial setting.
50 mm.
DHCE 6/50
59 mm.
Temperature rise chart^
19.6 kW
DEL 18A
105
29.1 kW
40
DEL 27A
105
Stiebel Eltron Warranty for Water Heaters – Models DHE, DEL,
DHB-E, DHC, SN & SNU
Who gives the warranty
1. The warranty is given by Stiebel Eltron (Aust) Pty Ltd (A.B.N.
82 066 271 083) of Unit 4/8 Rocklea Drive, Port Melbourne,
Victoria, 3207 (“we”, “us” or “our”).
The warranty
2. This warranty applies to Stiebel Eltron Water Heaters –
Models DHE 18, DHE 27, DEL 18A, DEL 27A, DHB-E 13A, DHB-E
13, DHB-E 18, DHB-E 27, DHC 4, DHC 6, DHC 8, SN 5, SN 10, SNU
5 and SNU 10 (the “unit”) manufactured after 1 June 2013.
3. Subject to the warranty exclusions we will repair or replace,
at our absolute discretion, a faulty component in your unit
free of charge if it fails to operate in accordance with its
specifications during the warranty period.
4. If we repair or replace a faulty component to your unit under
this warranty, the warranty period is not extended from the
time of the repair or replacement.
5. The warranty period commences on the date of completion
of the installation of the unit. Where the date of completion
of installation is not known, then the warranty period will
commence 2 months after the date of manufacture.
6. The warranty period for a unit used for domestic purposes is
shown in the table below. Domestic purposes means that the
unit is used in a domestic dwelling.
Component
Warranty period
All components
5 years from the date of
completion of the installation
of the unit.
7. The warranty period for a unit used for commercial purposes
is shown in the table below. Commercial purposes means that
the unit is used for a non-domestic purpose and includes but
not limited to being used in a motel, hotel, mining camp or
nursing home.
9.1. The model number of the unit;
9.2. A description of the problem with the unit;
9.3. The name, address and contact details (such as phone number and e-mail address) of the owner;
9.4. The address where the unit is installed and the location (e.g. in laundry);
9.5. The serial number of the unit;
9.6. The date of purchase of the unit and the name of the seller of the unit;
9.7. The date of installation of the unit;
9.8. A copy of the certificate of compliance when the unit was installed.
10. The contact details for you to make your warranty claim are:
Name:
Stiebel Eltron (Aust) Pty Ltd
Address:
Unit 4, 8 Rocklea Drive, Port Melbourne, Victoria, 3207
Telephone: 1800 153 351
(8.00 am to 5.00 pm AEST Monday to Friday)
Contact person: Customer Service Representative
E-mail: service@stiebel.com.au
11. We will arrange a suitable time with you to inspect and test
the unit.
Warranty exclusions
12. We may reject your warranty claim if:
12.1. The unit was not installed by registered and qualified tradespeople.
12.2. The unit was not installed and commissioned:
(a) in Australia;
Component
Warranty period
All components
1 year from the date of
completion of the installation
of the unit.
(b) in accordance with the Operating and Installation Guide; and
(c) in accordance with the relevant statutory and local requirements of the State or Territory in which the unit is installed.
Your entitlement to make a warranty claim
8. You are entitled to make a warranty claim if:
12.3. The unit has not been operated or maintained in accordance with the Operating and Installation Guide.
8.1. you own the unit or if you have the owner’s consent to represent the owner of the unit;
12.4. The unit does not bear its original Serial Number or Rating Label.
8.2. you contact us within a reasonable time of discovering the problem with the unit;
12.5. The unit was damaged by any or any combination of the following:
How you make a warranty claim
9. To make a warranty claim you must provide us with the
following information:
(a) normal fair wear and tear;
(b) connection to an incorrect water supply;
1 June 2013
(c) connection to water from a bore, dam or swimming pool;
(d) connection to an incorrect power supply;
(e) connection to faulty equipment, such as damaged valves;
(f) foreign matter in the water supply, such as sludge or sediment;
(g) corrosive elements in the water supply;
(h) accidental damage;
(i) act of God, including damage by flood, storm, fire, lightning strike and the like;
Australian Consumer Law
18. Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation for
any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not amount to a
major failure.
19. The Stiebel Eltron warranty for the unit is in addition to
any rights and remedies you may have under the Australian
Consumer Law.
(j) excessive water pressure, negative water pressure (partial vacuum) or water pressure pulsation.
12.6. The unit was damaged before it was installed e.g. it was damaged in transit.
12.7. An unauthorised person has modified, serviced, repaired or attempted to repair the unit without our consent.
12.8. Non genuine parts other than those manufactured or approved by us have been used on the unit.
13. We may charge you:
13.1. for any additional transport costs if the unit is installed more than 30 kilometres from our closest authorised service technician.
13.2. for the extra time it takes our authorised service technician to access the unit for inspection and testing if it is not sited in accordance with the Operating and Installation Guide and not readily accessible for inspection.
13.3. for any extra costs of our authorised service technician to make the unit safe for inspection.
14. You must ensure that access to the unit by our authorised
service technician is safe and free from obstruction.
15. Our authorised service technician may refuse to inspect and
test the unit until you provide safe and free access to it, at your
cost.
16. If we reject your warranty claim in accordance with clause
12, we may charge you for our authorised service technician’s
labour costs to inspect and test the unit.
17. In order to properly test the unit we may remove it to
another location for testing.
1 June 2013
Data Sheet
DEL 18 AU | DEL 27 AU
Instantaneous 3 Phase Electric Water Heater
Delivers hot water not exceeding 50°Celsius
in accordance with AS3498
The advantages
› Temperature selection up to a maximum of 50° Celsius in
accordance with AS3498
› Made in Germany
› Designed for Australian conditions
› Instantaneous, continuous supply of hot water
› Memory function & T-Max temperature limit function
› Compact space saving design for installation flexibility
› No external temperature control device required*
› No safe tray, flue or ventilation required
› Electronically controlled to accurately regulate the output water
temperature
› Electronic safety system with air detection
› Bare wire element design suitable for hard or soft water areas
› Available in two electrical sizes:
› DEL 18 AU (50°C) - 19.4kW, 27 Amps per phase, 3 phase 415V
› DEL 27 AU (50°C) - 28kW, 40 Amps per phase, 3 phase 415V
› WaterMark approved, licence number WMKA00301, AS3498
ELECTRONICALLY
CONTROLLED
3i Technology
Comfort
E
ency
PREMIUM
50˚C
PLEASE NOTE: The DEL AU SERIES
superseded the DEL A SERIES.
3 – fold intelligence for a high level of convenience |
The electronically regulated appliances feature 3i technology.
This comprises of an inlet temperature sensor, an outlet
temperature sensor and a flow sensor.
Ideal installation areas**
›
›
›
›
›
Bathrooms
Apartments
Factory bathrooms or sinks
Hair salons
Kitchenettes
For more information on the right Stiebel Eltron water heater for
your project please contact our Technical Services Department on
free call 1800 153 351 (Australia).
*This appliance delivers hot water not exceeding 50°Celsius in accordance with AS3498. Refer to AS/NZS3500.4, local requirements and installation instructions to
determine if additional delivery temperature control is required. If your application requires a Thermostatic Mixing Valve (TMV) we recommend using the STIEBEL ELTRON
DHE or DHB-E models which can heat water to 60°Celsius and work well with TMVs. The DEL AU is not suitable for operation with a TMV.
**Dependent on model selected
Free Call 1800 153 351 | www.stiebel.com.au
01 | 02
Data Sheet DEL AU AUG 2015_V2
3i
3 TIMES
THE INTELLIGENCE
Data Sheet
DEL 18 AU | DEL 27 AU
Instantaneous 3 Phase Electric Water Heater
Delivers hot water not exceeding 50°Celsius
in accordance with AS3498
3 PHASE ELECTRIC
Model number
DEL 18 AU
DEL 27 AU
Rated output (415V)
19.4kW
28kW
Rated current (415V)
27 Amp
40 Amp
Phases
3/PE
Electrical installation
3/PE
As per AS/NZS3000
Installation requirements
AS/NZS3500.4.2 & local requirements
Switch on flow rate
2.5 L/min
2.5 L/min
Permissible operating pressure
1000 kPa
1000 kPa
Temperature adjustment
30°C-50°C
30°C-50°C
IP Rating
IP25 (IP24 at electrical connection- finished walls)
Height
478 mm
478 mm
Width
225 mm
225 mm
Depth
105 mm
105 mm
Weight (filled with water)
4 kg
4 kg
Colour
white
white
Nominal capacity
0.4L
0.4L
Flow rate limiter (if fitted) L/min
7.5(blue) 12(brown) 7.5(blue) 12(brown)
Approvals
WaterMark Lic No. WMKA00301. AS3498
Equipment
For one/several draw off points
Yes / Yes
Yes / Yes
Heating system
Bare wire
Bare wire
Electronic flow rate control
-
-
Electronic air detection system
Yes
Yes
Accepts pre-heated water (solar)
Yes (incoming hot water must not exceed 45°C)
Programmable temperature
-
-
Wellness shower programs
-
-
ECO energy & water function
-
-
Radio remote control primary
-
-
Radio remote control secondary
-
-
Selecting the right Stiebel Eltron instantaneous water heater
Thank you for considering the Stiebel Eltron instantaneous water
heater, with over 90 years of hot water technology experience
we are sure you will be happy with your choice of a Stiebel Eltron
instantaneous water heater.
The temperature rise table will assist you in determining the
appropriate size of instantaneous water heater required for your
application. The required temperatures at specific flow rates
will determine the size of system needed. Our customer support
representatives can be contacted on our free call number 1800 153
351 to assist in selecting the appropriate system/systems for your
project.
Installation close to the point of use
The Stiebel Eltron DEL AU instant water heaters compact design
allows for ease of installation close to the point of use. In order to
minimise thermal losses in the pipe work the water heater should be
installed as close to the point of use as possible.
Electrical installation
This water heater must be installed in accordance with AS/NZS3000
electrical regulations by a qualified installer.
Plumbing installation
This water heater must be installed in accordance with AS/NZS3500.4.2
and local authority regulations by a qualified installer.
Warranty
For full warranty information please visit www.stiebel.com.au.
Technical Support
Stiebel Eltron (Aust) Pty Ltd
Free Call (Australia): 1800 153 351
Telephone: (03) 9645 1833
Website: stiebel.com.au
Optional accessories
DEL AU instantaneous 3 phase electric water heater
225
140
DEL 27 AU*
33°C*
14L/min
19°C*
28°C*
^Please note temperature rise is based on connection to 415V
* The DEL AU instantaneous 3 phase electric water heater delivers hot water
not exceeding 50°Celsius in accordance with AS3498. Refer to AS/NZS3500.4,
local requirements and installation instructions to determine if additional delivery
temperature control is required.
165
b04
Hot water outlet
b04
35
100
c06
c01
114
mm
Cold water inlet
STIEBEL ELTRON is committed to our policy of continual improvement, some features may have subsequently been changed or even removed. Our advisors will be happy
to consult with you regarding the currently applicable equipment features. The images used in this brochure are for reference only.
Free Call 1800 153 351 | www.stiebel.com.au
01 | 02
Data Sheet DEL AU AUG 2015_V2
39°C*
23°C*
478
27°C*
12L/min
b02
30
35
10L/min
b04
b02
30
b04
44
-
72
-
34°C*
35
46°C*
8L/min
338
6L/min
b03
50
-
47
44
-
105
b04
Add the below temperature to the cold water inlet temperature.*
4L/min
≤ 20
493
473
414
368
DEL 18 AU*
325
Temperature rise chart^
Posh Solus Toilet Roll Holder from Reece
Page 1 of 2
http://www.reece.com.au/bathrooms/products/posh-solus-toilet-roll-holder-9504077
10/05/2016
page 1 of 3
BASE MKII
BASIN MIXER
SPECIFICATIONS
Recommended use
Domestic, hotel and commercial
Colour availability
Chrome
Pressure rating
Maximum continuous operating pressure
1000kPa.
Note: As per AS/NZS 3500 pressure must be
limited to 500kPa on any new home, extension
or renovation.
Note: For best performance and longer life we
recommend an operating pressure between
150-500 kPa
Temperature rating
Maximum continuous working temperature 80°
WELS
Stars 4
Flow Rate 7.5 L/min
Suitable Hot Water Units
Storage tank: Yes
Continuous Flow: Yes
Gravity Feed: Not recommended
Standards
AS/NZS 3718
CLEANING RECOMMENDATIONS
This product should not be cleaned with abrasive materials
eg. steel wool/scourers. Do not use any corrosive or abrasive
cleaning agents containing acids or scouring agents. Bleaches
can also discolour products and therefore should not be used.
Damage caused by any improper treatment is not covered by the
product warranty- refer to Warranty Conditions on the last page.
The more
stars the more
water efficient
WATER
RATING
A joint government and industry program
Licence No. 1238
7.5
litres per minute
When tested at 150, 250 & 350kPa
When tested in accordance with Standard AS/NZS 6400
www.waterrating.gov.au
WMKA
22094
Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered
trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from
their range without prior notification. Dimensions are nominal measurements only. Dimensions and set-outs
listed are correct at time of publication however the manufacturer/distributor takes no responsibility for
printing errors.
Tech Page Version 1
page 2 of 3
BASE MKII
BASIN MIXER
INSTALLATION
4. Place the washer into position.
Note
5. Fit the tap body (7) into the basins hole making sure first that
the flexible connectors (10, 11) are firmly tightened into the base
of the body.
The installation must comply with requirements of AS/NZS
3500. Mixer must be installed by a licenced plumber.
Important
Your mixer comes to you already factory assembled and tested.
We do not recommend the dismantling of any internal part of
the mixer. The mixers are factory tested and sealed so as to
give the best performace.
1. Please flush out new pipe work prior to connecting the new
mixer.
2. All mixers should be installed with isolating stop cocks (Arco
brand recommended).
3. This tap is suitable for high pressure applications where both
hot and cold water supply pressures are at 150kPa or above.
6. Do not use teflon tap on threads.
7. From underneath apply your washer prior to positioning the
horse shoe plate.
8. Lock the mixer onto the basin or benchtop by tightening the
lock nut.
Servicing - Replacement of Cartridge
1. Remove cap (3) and unscrew the grub screw (2) using allen
key.
2. Lift off handle and remove the cartridge dome (4), unscrew
brass locking nut (5) and lift out cartridge (6).
3. Replace the cartridge (6), replace the brass locking nut (5),
replace the cartridge dome (4) and replace handle. Tighten grub
screw (2) and push in indicator cap (3).
Exploded View
Item Description Product Code
1-3.Basin Mixer Handle Complete
9502420
4. Cartridge Dome
5. Cartridge Lock Nut
6.
Cartridge9502422
7. Mixer Body
Plumbers, please ensure a copy of the installation
instructions is left with the end user for future reference
8. Aerator Complete
9502423
9. Basin Mixer Fixing Kit
9502426
10. Flexible Hose (Hot)
9502424
11. Flexible Hose (Cold)
9502425
QU
AL
1
YEAR
IT Y
TE
BASE MKII
BASIN MIXER
E
page 3 of 3
G UARA
N
REECE PRODUCT QUALITY GUARANTEE
You have purchased a quality product from Reece Pty Ltd
ABN 84 004 097 090 (“Reece”). This product is covered by a
1 year replacement product warranty and a 12 month warranty
over spare parts and labour.
This warranty does not include faults caused by:
1 YEAR WARRANTY – DOMESTIC USE
This warranty covers faults in the product construction, material
and assembly. Products which are within 1 year from the date
of purchase, found upon inspection by an authorised Reece
representative, to be defective in construction, material or
assembly, will be repaired or exchanged with an equivalent
product free of charge. Replaced items become Reece’s
property. This warranty also covers any spare parts included
under “Manufacturer’s Provisions” below.
• Installation or part installation by the purchaser or any person
other than a LICENSED PLUMBER
All replacement products will be available for collection without
charge to the customer at the nearest Reece branch to the
customer’s location, or elsewhere as agreed between the
customer and Reece.
Labour and Spare Parts
The labour for the replacement of products and spare parts
to which this warranty applies will be supplied by Reece or
relevant supplier using licensed plumbers engaged by Reece or
relevant supplier within 1 year from the date of purchase.
Spare parts other than those listed in the Manufacturer’s
Provisions above, which are within 1 year from the date of
purchase found upon inspection by an authorised Reece
representative to be defective in construction, material or
assembly, will be replaced free of charge.
Warranty Conditions
This warranty will apply only under all of the
following conditions:
• The item has been installed by a licensed plumber
• The item has been installed for and subjected to domestic
residential use only
• Failure is due to a fault in the manufacture of the product
• Proof of purchase (including the date of purchase)
is provided
• The installation of the product is in accordance with the
instructions provided
• Incorrect installation or installation not in accordance with
the instructions provided
• Normal wear and tear
• Inadequate or complete lack of maintenance
• Chemical, electrochemical or electrical influences
• Harsh detergents or abrasive cleaners used on
product finishes
1 YEAR WARRANTY – COMMERCIAL USE
‘Commercial’ use is all use other than for normal domestic
residential purposes, including use in non-business places as in
public buildings, schools, sports centres and in establishments
that contain private bathrooms with high frequency of use by
many individuals, such as hotels, motels, retirement villages
and hospitals.
The Commercial warranty covers this product against
manufacturing faults in the construction, material and assembly
of both the finished products and any spare parts for a period
of 1 year from the date of purchase. Products and spare
parts which are found upon inspection by an authorised
Reece representative to be defective in construction, material
or assembly will be repaired or exchanged free of charge.
Replaced items become Reece’s property. The labour for the
replacement of products and spare parts to which this warranty
applies will be supplied by Reece or relevant supplier using
licensed plumbers engaged by Reece or relevant supplier.
The Warranty Conditions and exclusions which apply to the
domestic use warranty also apply to this commercial warranty.
EXCLUSIONS
To the fullest extent permitted by law, Reece excludes all liability
for damage or injury to any person, damage to any property,
and any indirect consequential or other loss or damage.
CLAIM PROCEDURE
For all warranty queries customers are to contact the branch
where the product was purchased. These details can be found
on your purchase invoice.
Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
TAP.T1.1YR
This warranty does not cover products purchased as an
ex-display without being fully checked and tested for sale by
the manufacturer.
• Unsuitable or improper use
Don’t risk it, use a licensed plumber.™
page 1 of 4
POSH
DOMINIQUE MKII 2 DOOR MIRROR CABINET
150
130
750
600/750/900
SPECIFICATIONS
Recommended use
Domestic, hotel and commercial.
Colour availability
White
Finish material
2-pack gloss finish moisture resistant MDF
Fixing requirement
Fixed to wall or inset into wall cavity
Widths
600mm, 750mm or 900mm
Height
750mm
Depth
150mm
Mirror
3mm glass with safety backing
Door features
Anti-slam door stoppers
CLEANING RECOMMENDATIONS
We recommend the use of a mild glass cleaner for glass doors.
This product should not be cleaned with abrasive materials.
Damage caused by improper treatement is not covered by the product
warranty - refer to warranty conditions on the last page.
Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people. The
manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior notification. Dimensions
are nominal measurements only. Dimensions and set-outs listed are correct at time of publication however the manufacturer/distributor
takes no responsibility for printing errors.
Tech Page Version 2
To see the complete Posh range go to
www.reece.com.au/bathrooms
page 2 of 4
POSH
DOMINIQUE MKII 2 DOOR MIRROR CABINET
INSTALLATION INSTRUCTIONS
Please read instructions carefully. Remove all wrapping material,
staples and packing straps from the carton. Be sure to have all
parts before you start assembling. Place all wooden furniture parts
on a clean and flat surface, such as carpet or a rug to prevent
scratching.
1. Locate noggins or re-enforced fixing points in wall
2. Drill pilot holes in cabinet to line up with pre-determined fixing
points
3. Fix cabinet to wall using appropriate screws for the relevant wall
material. Take care not to overtighten screws.
4. If installed in a wall cavity, ensure that the mirror cabinet is securely fixed to framework
5. Refer below for cabinet assembly
Plumbers, please ensure a copy of the installation
instructions is left with the end user for future reference
PARTS INCLUDED
1. CABINET
:1PC
2. SHELF
:2PCS
3. SHELF SUPPORT
:8PCS
page 3 of 4
POSH
DOMINIQUE MKII 2 DOOR MIRROR CABINET
HINGE ADJUSTMENT INSTRUCTIONS
Adjustable screw “A”
Adjustable screw “A”
Front and rear adjustment in three dimensions.
Adjustable screw “B”.
The clearance between door board and cabinet side
board can be changed only by adjusting screw “A”.
Left and right adjustment in three dimensions
able screw “B”
ablescrew
screw“B”
“B”
able
Adjustable screw “B”
Adjustable screw “B”
Adjustablescrew
screw“B”
“B”
Adjustable
Adjustablescrew
screw“B”
“B”
Adjustable
Adjustable screw “C”
Adjustable screw “C”
Adjustablescrew
screw“C”
“C”
Adjustable
Vertical adjustment in three dimensions.
Vertically and clearance bewteen top and bottom can be
corrected by adjusting screw “C” on hinge base board.
Plumbers, please ensure a copy of the installation
instructions is left with the end user for future reference
QU
AL
7
YEAR
IT Y
TE
POSH
DOMINIQUE MKII 2 DOOR MIRROR CABINET
E
page 4 of 4
G UARA
N
REECE PRODUCT QUALITY GUARANTEE
You have purchased a quality product from Reece Pty Ltd
ABN 84 004 097 090 (“Reece”). This product is covered by a
7 year replacement product warranty and a 12 month warranty
over spare parts.
7 YEAR WARRANTY – DOMESTIC USE
This warranty covers faults in the product construction, material
and assembly. Products which are within 7 years from the
date of purchase, found upon inspection by an authorised
Reece representative, to be defective in construction,
material or assembly, will be repaired or exchanged with an
equivalent product free of charge. Replaced items become
Reece’s property.
All replacement products will be available for collection without
charge to the customer at the nearest Reece branch to the
customer’s location, or elsewhere as agreed between the
customer and Reece.
Spare Parts
Spare parts which are within 1 year from the date of purchase
found upon inspection by an authorised Reece representative
to be defective in construction, material or assembly, will be
replaced free of charge.
Warranty Conditions
This warranty will apply only under all of the
following conditions:
• The item has been installed for and subjected to domestic
residential use only
• Failure is due to a fault in the manufacture of the product
• Proof of purchase (including the date of purchase)
is provided
• The installation of the product is in accordance with the
instructions provided
This warranty does not include faults caused by:
1 YEAR WARRANTY – COMMERCIAL USE
‘Commercial’ use is all use other than for normal domestic
residential purposes, including use in non-business places as in
public buildings, schools, sports centres and in establishments
that contain private bathrooms with high frequency of use by
many individuals, such as hotels, motels, retirement villages
and hospitals.
The Commercial warranty covers this product against
manufacturing faults in the construction, material and assembly
of both the finished products and any spare parts for a period
of 1 year from the date of purchase. Products and spare
parts which are found upon inspection by an authorised
Reece representative to be defective in construction, material
or assembly will be repaired or exchanged free of charge.
Replaced items become Reece’s property. The replacement
of products and spare parts to which this warranty applies
will be supplied by Reece or relevant supplier. The Warranty
Conditions and exclusions which apply to the domestic use
warranty also apply to this commercial warranty.
EXCLUSIONS
To the fullest extent permitted by law, Reece excludes all liability
for damage or injury to any person, damage to any property,
and any indirect consequential or other loss or damage.
CLAIM PROCEDURE
For all warranty queries customers are to contact the branch
where the product was purchased. These details can be found
on your purchase invoice.
Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
• Unsuitable or improper use
• Incorrect installation or installation not in accordance with
the instructions provided
• Normal wear and tear
• Inadequate or complete lack of maintenance
• Chemical, electrochemical or electrical influences
MIRROR_VAN.T1.7YR
• Harsh detergents or abrasive cleaners used on
product finishes
Don’t risk it, use a licensed plumber.™
WZKhd^W/&/d/KEs/t
KEKD^dZD&ϲϬͲ^^
ŚŝůůĞĚ >ŝŐŚƚŽŵŵĞƌĐŝĂůhƐĞ ƵďďůĞƌ
ĂƌĂĨĞ &ŝůƚĞƌĞĚ
KƌĚĞƌŽĚĞ͗DϭϱϬϱ
ŝƉĐŽŶŽDĂƐƚĞƌΠ/ŶƐƚĂŶƚĨŝůƚĞƌĞĚĚƌŝŶŬŝŶŐǁĂƚĞƌ͘&ƌĞĞͲƐƚĂŶĚŝŶŐƵƉƌŝŐŚƚĐŚŝůůĞƌǁŝƚŚŚĞĂǀLJĚƵƚLJ͕
ĞĂƐLJͲƚŽͲĐůĞĂŶďŽǁůĂŶĚĐĂƐĞƉĞƌĨĞĐƚĨŽƌĨĂĐƚŽƌŝĞƐ͕ǁŽƌŬƐŝƚĞƐĂŶĚƐŝƚĞƐŚĞĚƐ
^W/&/d/KEZYh/ZDEd^
ĂƐĞ ^ƚĂŝŶůĞƐƐ^ƚĞĞů
dĂƉ ƵďďůĞƌĂŶĚĂƌĂĨĞ&ŝůůĞƌ
ĂƉĂĐŝƚLJ ϲϬ'ůĂƐƐĞƐͬϭϮ>ŝƚƌĞƐƉĞƌŚŽƵƌ;ϳΣͲϭϮΣͿ
tĂƚĞƌWƌĞƐƐƵƌĞ DŝŶϴϬŬWĂͲDĂdžϱϬϬŬWĂ
tĂƚĞƌĐŽŶŶĞĐƚŝŽŶ ϭϮ͘ϳŵŵ^W
tĂƚĞƌsĂůǀĞƐ Eͬ
&ŝůƚĞƌ hŶĨŝůƚĞƌĞĚ
ƌĂŝŶ /ŶƚĞŐƌĂůϰϬŵŵWs^ΘWdƌĂƉ
WŽǁĞƌ ϭϬĂŵƉ'WKϮϮϬͲϮϰϬsϱϬͬϲϬ,nj
ŝŵĞŶƐŝŽŶƐ ,ϵϬϯŵŵdžtϯϱϬŵŵdžϯϱϬŵŵ
WƌŽĚƵĐƚĂƉƉƌŽǀĂůƐ tĂƚĞƌDĂƌŬ͕͕Z
tĂƌƌĂŶƚLJ ϭLJĞĂƌ
ŝŵĞŶƐŝŽŶƐ ,ϵϬϯŵŵdžtϯϱϬŵŵdžϯϱϬŵŵ
WƌŽĚƵĐƚĂƉƉƌŽǀĂůƐ tĂƚĞƌDĂƌŬ͕͕Z
tĂƌƌĂŶƚLJ ϭLJĞĂƌ
/^>/DZ
ϭ͘ DƵƐƚďĞŝŶƐƚĂůůĞĚďLJĂƐƵŝƚĂďůLJƋƵĂůŝĨŝĞĚƉĞƌƐŽŶŝŶĂĐĐŽƌĚĂŶĐĞǁŝƚŚŵĂŶƵĨĂĐƚƵƌĞƌƐŝŶƐƚƌƵĐƚŝŽŶƐ
ĂŶĚǁŝƚŚĂůůƌĞůĞǀĂŶƚƉůƵŵďŝŶŐĂŶĚĞůĞĐƚƌŝĐĂůƌĞŐƵůĂƚŝŽŶƐ
Download PDF