Wall Input
Panel Type 1
Press Power button to activate projector. (Give
it a minute to warm up.) Press Power button
twice to turn the projector off when not in use.
VGA Cable
Connect your device into the wall’s Computer
input using a VGA cable. Press Source button
to cycle through available projector inputs until
your device’s screen displays. (The Source
button toggles the wall input and an Apple TV,
so press it until the desired device displays.)
Press Arrow buttons to control classroom
speaker volume. (Separate from your device’s.)
Please Note: Macs, iPads, Android devices, and
some PC laptops require a special VGA or HDMI
adapter in order to connect to the respective cable.
VGA Cable
Wall Input
Panel Type 2
Press On to activate projector. (Give it a minute
to warm up.) Press Off twice to turn the
projector off when not in use.
If connecting your device with a VGA cable,
use the wall’s Computer input and press
Video to display your device’s screen.
If connecting your device with an HDMI cable,
use the wall’s HDMI input and press Video to
display your device’s screen. (The Video
button toggles the wall input and an Apple TV,
so press it until the desired device displays.)
Press Arrow buttons to control classroom
speaker volume. (Separate from your device’s.)
HDMI Cable