EN
max
www.tefal.com
TE_KITCHEN-8080012365-01.indd 1
5/2/13 8:25 PM
A
B
B2
A5
A4
A3
B1
A6
A7
A2
A1
max
D
D3
C
D2
C1
D1
C2
C3
2
TE_KITCHEN-8080012365-01.indd 2
5/2/13 8:25 PM
F
F7
E
F8
F5
F1
F4 F3 F2
F6
H
G
H1
G6
G5
G2
G1
H2
H3
H5
G4
H4
G3
H6
3
TE_KITCHEN-8080012365-01.indd 3
5/2/13 8:25 PM
4
TE_KITCHEN-8080012365-01.indd 4
5/2/13 8:25 PM
5
TE_KITCHEN-8080012365-01.indd 5
5/2/13 8:25 PM
6
TE_KITCHEN-8080012365-01.indd 6
5/2/13 8:25 PM
7
TE_KITCHEN-8080012365-01.indd 7
5/2/13 8:25 PM
EN
Thank you for choosing an appliance from the Tefal range, which is intended exclusively for the preparation of food
and is only for indoor, domestic use.
DESCRIPTION
A - Motor unit
a1 Electronic speed selector
a2 Multi-function head (a3) release button
a3 Multi-function head
a4 High speed outlet
(blender jug / juice / extractor / grinder)
a5 Safety cover
a6 Mixer accessories outlet
(kneader, balloon whisk, mixer)
a7 Power cord storage
B - Bowl assembly
b1 Stanless steel bowl
b2 Lid
C - Mixer accessories
c1 Kneader
c2 Mixer
c3 Balloon whisk
D - Blender jug (depending on model)
d1 Jug
d2 Lid
d3 Measuring cup
E - Attachment holder (depending on model)
F - Mincer head (depending on model)
f1 Metal body
f2 Feed screw
f3 Blade
f4 Large-hole screen
f5 Small-hole screen
f6 Nut
f7 Pusher
f8 Tray
G - Vegtable slicer (depending on model)
g1 Drum body
g2 Pusher
g3 Slicer drum A
g4 Coarse grater drum C
g5 Fine grater drum D
g6 Reibekuchen drum E
H - Juice extractor (depending on model)
h1 Pusher
h2 Lid
h3 Rotary filter
h4 Juice collector
h5 Pouring spout
h6 Locking lever
I - Grinder (depending on model)
SAFETY INSTRUCTIONS
• Read the instructions for use carefully before using your appliance for the first time: the manufacture shall accept no
liability in the event of any use that does not comply with the instructions.
• This appliance is not designed to be used by persons (including children) with reduced physical, sensorial or mental
capacities, or by people with no prior knowledge or experience, except where they have benefited from supervision
or previous instructions relating to the use of the appliance, from a person responsible for their safety. Children must
be supervised to ensure that they do not play with the appliance.
• Check that the power rating of your appliance corresponds to your electrical supply. Any connection fault
invalidates the warranty.
• Your appliance is intended only for domestic culinary use, in an indoor setting and under supervision.
• Always unplug the appliance as soon as you have finished using it and when you are cleaning it.
• Do not use the appliance if it is not working properly or if it has been damaged. Contact an authorised service centre
(see list in the service booklet).
• Any maintenance other than routine cleaning and upkeep by customers must be carried out by an approved service
centre (see list in the service booklet).
• Do not place the appliance, the supply cable or the plug in water or any other liquid.
• The power cord must be kept out of the reach of children and must not be placed near or come into contact with the
hot parts of the appliance, sources of heat or sharp corners.
• If the power cable or the plug are damaged, do not use the appliance. To maintain safety, these parts must be
replaced by an approved service centre (see list in the service booklet).
• Do not place the accessories in a microwave oven.
• For your own safety, use only accessories and spare parts designed for your appliance and sold in an approved
service centre.
• Always remove the blender (d) or the juice extractor (h) before pressing the multi-function head (a3) release button
(a2).
• Always use the pusher (f7) with the mincer head accessory (f), to guide food in the feed tube. Never use your
fingers, a fork, a spoon, a knife or any other object.
• Never touch any moving parts. Wait for the appliance to come to a complete stop before removing accessories.
8
TE_KITCHEN-8080012365-01.indd 8
5/2/13 8:25 PM
EN
• Handle the sharp blades (d, f, g) carefully when emptying the bowls and when cleaning: they are extremely sharp.
• Do not touch the whisks or the kneader when the appliance is running.
• Do not allow long hair, scarves, ties etc. to dangle over the appliance during operation.
• Never insert utensils (spoon, spatula, etc.) through the feed tube in the lids (b2), (d2) or (h2) in the drum body (g1).
• Do not run the blender jug (d1) without its lid (d2).
• Use only one accessory at a time.
• Do not use the bowls (b1, d1) as containers for freezing, cooking or sterilisation.
• Do not use the juice extractor if the rotary filter (h3) is damaged.
• Switch off the appliance and unplug from the mains supply before changing accessories or handling any parts that
move during use.
BEFORE FIRST USE
• Before using for the first time, wash all accessory parts in warm water and washing up liquid (except for the
attachment (e): see cleaning paragraph) Rinse and dry.
• Place the appliance on a flat, clean and dry surface. Make sure that the selector button (a1) is in “0” position and
plug in your appliance.
• You have several options for starting your appliance:
- Intermittent operation (pulse): Turn the selector button (a1) to the “pulse” position. Using a succession of
pulses can give you better control when preparing certain foods.
- Continuous operation: Turn the selector button (a1) to the desired position from “1” to “max” depending on the
food you are preparing.
You can change it as required during preparation.
• To stop the appliance, turn the button (a1) to “0”.
Important: The appliance will start only if the cover (a5) and the head (a3) are locked. The appliance will stop
immediately if you unlock the cover (a5) and/or the head (a3) during operation. Lock the cover and/or the
head, turn the control button (a1) to the “0” position, and then start the appliance normally by selecting the
desired speed.
Your appliance comes with a microprocessor that controls and analyses the operating power. If the load becomes
too high, your appliance will stop automatically. To restart your appliance, turn the rotary button (a1) to the “0”
position and remove some of your ingredients. Allow your appliance to cool down for a few minutes. You can then
select the desired speed to complete your preparation.
The paragraph numbering corresponds to the numbers in the diagrams.
1 - MIXING / KNEADING / BEATING / EMULSIFYING / WHISKING
You can prepare up to 1,8 kg of dough using the stainless steel bowl (b1) and its lid (b2) depending on the food.
ACCESSORIES USED:
- Stainless steel bowl (b1).
- Lid (b2)
- Kneader (c1) or mixer (c2) or balloon whisk (c3)
1.1 - ASSEMBLING THE ACCESSORIES
• Press the button (a2) to release the multi-function head (a3) and raise it until it locks in place. (Fig 1.1a).
• Lock the stainless steel bowl (b1) (clockwise) on the appliance and put in the ingredients. (Fig 1.1b)
• Insert the desired accessory (c1, c2 or c3) on the outlet (a6), push and rotate it anti-clockwise a quarter turn to
lock the accessory in its housing. (Fig 1.1c).
• Place the multi-function head (a3) to the horizontal position: press the button (a2) and manually lower the multifunction head (a3) until it locks (the button (a2) returns to its initial position).
• Slide the lid (b2) over the stainless steel bowl (b1). (Fig 1.1d).
Note: It is not essential to use the lid but it prevents splashing.
• Make sure that the cover (a5) is locked correctly (clockwise) on the high-speed outlet (a4).
1.2 - USAGE
Start by turning the selector button (a1) to the desired position according to the recipe.
• The appliance starts running immediately.
You can add food through the hole in the lid (b2) during preparation.
• To stop the appliance, turn the button (a1) to “0”.
9
TE_KITCHEN-8080012365-01.indd 9
5/2/13 8:25 PM
EN
Tips:
- Kneading
- Use the kneader accessory (c1) at speed “1”.
You can knead up to 500 g of flour (e.g. white bread, grain bread, short crust pastry, etc.).
- Mixing
- Use the mixer (c2) at speed “1” to “max”.
You can mix up to 1,8 kg of light dough (light cake mixture, sponge cake, biscuit or cookie dough).
- Never use the mixer (c2) to knead heavy dough.
- Beating / emulsifying / whisking
- Use the balloon whisk (c3) at speed “1” to “max”.
- You can prepare: mayonnaise, aioli, sauces, whisked egg whites (up to 8 egg whites), whipped cream
(up to 500 ml), meringues etc.
- Never use the balloon whisk (c3) to knead heavy dough or mix light dough.
1.3 - DISMANTLING THE ACCESSORIES
• Wait for the appliance to come to a complete stop.
• Remove the lid (b2).
• Using the button (a2), release the multi-function head (a3) and raise it to the upper position.
• Release the accessory (c1), (c2) or (c3) from the multi-function head by pushing the accessory into the head and
rotating it clockwise a quarter turn.
• Remove the stainless steel bowl.
2 - BLENDING/MIXING (DEPENDING ON MODEL)
Depending on the nature of the food, you can use the blender (d) to prepare up to 1.5 L of thick mixtures
and 1.25 L of liquid mixtures.
ACCESSORIES USED :
- Blender jug (d)
2.1 - ASSEMBLING THE ACCESSORIES
• Place the multi-function head (a3) in the horizontal position: press the button (a2) and manually lower the multifunction head (a3) until it locks (the button (a2) returns to its initial position). (Fig 2.1a).
• Unlock the safety cover (a5) from the high-speed outlet (a4) by rotating it anti-clockwise and then remove it.
(Fig 2.1b).
• Make sure that the appliance is switched off before locking the blender (d).
• Lock the blender jug (d) on the outlet (a4) by rotating it clockwise.
• Place the food in the blender jug, and lock the lid (d2) fitted with the measuring cap (d3), by rotating it anticlockwise. (Fig 2.1c).
2.2 - USAGE
• Start by turning the selector button (a1) to the desired position according to the recipe.
Use the “Pulse” position for better mixing control and for a better blending of your preparation.
You can add food through the hole in the measuring cap (d3) during preparation.
• To stop the appliance, turn the button (a1) to “0”.
Tips :
You can prepare:
- finely blended soups, cream soups, stewed fruit, milkshakes and cocktails.
- liquid batter (pancake, fritters, Yorkshire pudding, waffles, clafoutis and custard flans).
If ingredients stick to the sides of the bowl when mixing, stop the appliance. Remove the blender, and push the food
down onto the blades and put your blender back to continue your preparation.
• Never fill the blender jug with boiling liquid. Only use liquids or foods at simmering temperatures or below.
• Never run the blender jug empty.
• Always use the blender jug with its lid.
• Never remove the lid before the blades have stopped completely.
• Always pour liquid ingredients into the blender jug first before adding solid ingredients.
2.3 - DISMANTLING THE ACCESSORY
10
TE_KITCHEN-8080012365-01.indd 10
5/2/13 8:25 PM
EN
• Wait for the appliance to come to a complete stop before removing the blender by unlocking it in the anti-clockwise
direction and put back the cover (a5) by locking it on the outlet (a4) (clockwise).
3 - MINCING (DEPENDING ON MODEL)
ACCESSORIES USED :
- Attachment holder (e)
- Assembled mincer head (f)
3.1 - FITTING THE MINCER ATTACHMENT
• Press the button (a2) to release the multi-function head (a3) and raise it until it locks in place. (Fig 3.1a).
• Place the attachment (e) and lock it in the anti-clockwise direction such that the outlet is in alignment with the appliance.
(Fig 3.1b).
• Place the multi-function head (a3) in the horizontal position by pressing the button (a2) once again.
3.2 - ASSEMBLING THE MINCER HEAD
• Hold the body (f1) by the feed tube, with the wider opening uppermost.
• Insert the feed screw (f2) (long shaft first) into the body (f1). (Fig 3.2a).
• Fit the blade (f3) onto the short shaft protruding from the feed screw (f2) with the cutting edges facing outwards.
• Fit the chosen screen (f4 or f5) on the blade (f3), aligning the two lugs with the two notches in the body (f1).
• Screw the nut (f6) home on the body (f1) in the clockwise direction, without locking it.
• Check the assembly. The shaft should have no play, neither should it be able to turn on its own. Otherwise, repeat
the assembly procedure. (Fig 3.2b).
3.3 - FITTING THE MINCER HEAD ON THE APPLIANCE
• Facing the attachment outlet (e), insert the assembled mincer head (f) inclined to the right, aligning the two
bayonets in the mincer head with the two notches in the attachment. Push the mincer head home into the
attachment and turn the mincer head anti-clockwise until it latches with the feed tube in the vertical position.
(Fig 3.3a).
• Place the removable tray (f8) on the feed tube. (Fig 3.3b).
• Turn the safety cover (a5) clockwise on the high speed outlet (a4).
3.4 - USAGE, TIPS AND DISMANTLING
• Make sure that the safety cover (a5) is locked correctly (clockwise) on the high-speed outlet (a4).
• Place a container to collect the preparation in front of the appliance.
• Run the appliance by turning the selector (a1) to speed “3” or “4”.
• Push the meat, piece by piece, down the feed tube, using the pusher (f7). Never push the ingredients down the
feed tube with your fingers or any other utensil.
• To stop the appliance, turn the selector to “0” speed and wait for the appliance to come to a complete stop.
• Unlock the mincer head in the reverse order of the assembly.
Tips :
- Prepare all of the foodstuffs to be minced (for meat, remove the bones, gristle and tendons and cut it into pieces of
approximately 2 x 2 cm).
- Make sure that frozen meat is thoroughly thawed.
- At the end of the operation, you can feed a few small pieces of bread into the feed tube to clear any meat remaining
in the machine.
4 - GRATING / SLICING (DEPENDING ON MODEL)
ACCESSORIES USED :
- Attachment holder (e)
- Assembled vegetable slicer (g)
- Drums (depending on model)
4.1 - ASSEMBLING THE ACCESSORIES
• Press the button (a2) to release the multi-function head (a3) and raise it until it locks in place.
• Insert the attachment (e) and lock it in an anti-clockwise direction so that the outlet is aligned to the left of the
appliance.
• Place the multi-function head (a3) in the horizontal position by pressing the button (a2) once again. (Fig 4.1b).
11
TE_KITCHEN-8080012365-01.indd 11
5/2/13 8:25 PM
EN
• Make sure that the safety cover (a5) is locked correctly (clockwise) on the high-speed outlet (a4). (Fig 4.1c).
• Position the attachment (e) facing you, insert the drum body (g1) inclined to the right, aligning the two bayonetcs
in the drum body with the two notches in the attachment. Push the drum body home and turn the drum body anticlockwise until it latches with the feed tube in the vertical position.
• Insert the chosen drum into the body, and make sure that it is fully engaged in the body.
4.2 - USAGE AND TIPS
• Place a container to collect the preparation in front of the appliance.
• Run the appliance by turning the selector (a1) to speed “3” to slice and to speed “4” to grate.
• Place the food in the feed tube on the body and press down with the pusher (g2). Never push the ingredients with
your fingers or any other utensil.
• To stop the appliance, turn the selector to “0” speed and wait for the appliance to come to a complete stop.
• Unlock the drum body in the reverse order of the assembly.
• Use the drums to :
- Grate coarsely C (g4) / grate finely D (g5): carrots, celery, potatoes, cheese, etc.
- Slice thickly A (g3): potatoes, carrots, cucumbers, ap ples, beetroot, etc.
- Reibekuchen E (g6): potatoes, parmesan, etc.
5 - EXTRACTING JUICE FROM FRUITS AND VEGETABLES (DEPENDING ON MODEL)
ACCESSORIES USED :
- Assembled juice extractor (h).
5.1 - ASSEMBLING THE JUICE EXTRACTOR
• Place the filter (h3) in the middle of the juice collector (h4). (Fig 5.1a).
• Lock the lid: turn it anti-clockwise and lock the lid (h2) on the juice collector (h4) (closed padlock position). (Fig 5.1b).
• General locking: push the locking lever (h6) to closed padlock position. (Fig 5.1c).
5.2 - FITTING THE JUICE EXTRACTOR ON THE APPLIANCE
• Place the multi-function head (a3) in the horizontal position: press the button (a2) and manually lower the multifunction head (a3) until it locks (the button (a2) returns to its initial position).
• Unlock and remove the cover (a5) from the outlet (a4) by turning it anti-clockwise.
• Make sure that the appliance is switched off before locking the juice extractor (h).
• Lock the assembled juice extractor on the outlet (a4) by turning it clockwise, so as to have the outlet for the
pouring spout aligned with the appliance.
• Fit the pouring spout (h5) on the collector (h4).
5.3 - USAGE AND TIPS
• Place a large glass under the pouring spout (h5).
• Run the appliance by turning the selector (a1) to speed “3”.
• Cut the fruits and/or vegetables into pieces.
• Insert them down the feed tube in the lid (h2) push them slowly using the pusher (h1). Never push the ingredients
with your fingers or any other utensil.
• Do not process 500 g of food more than 5 times continuously, without allowing your appliance to cool down
completely.
• For best results, clean the filter after every 300 g of ingredients.
• Important: When the pulp collector is full, stop the appliance and empty the collector.
• To stop the appliance, turn the selector to “0” speed and wait for the appliance to come to a complete stop.
• Wait until the rotary filter comes to a complete stop before removing the assembly from the appliance.
• To remove the juice extractor, unlock it by turning it anti-clockwise.
• Place the locking lever (h6) in the open padlock position. Open the lid (open padlock position). You can then
remove the filter (h3) to clean it and empty the collector (h4).
Tips :
• You can make juice from: carrots, tomatoes, apples, grapes, raspberries, etc.
• Peel fruits with thick skins; remove stones and the core of pineapples.
• It is not possible to extract juice from certain fruits and vegetables: bananas, avocado pears, blackberries, etc.
• You can prepare juices with different fruits and vegetables without having to clean the juice extractor every time,
the flavours will not be mixed. Just run the extractor with a little water to rinse it between two different juices.
• Drink the juices immediately after preparation, and add lemon juice to keep them in the fridge for a few hours.
12
TE_KITCHEN-8080012365-01.indd 12
5/2/13 8:25 PM
EN
6 - ADJUSTING THE CORD LENGTH
For more comfortable use or for storage, you can reduce the cord length by pushing it inside the motor unit (a) via the
opening on the rear (a7). (Fig 6).
7 - FINELY CHOPPING SMALL QUANTITIES (DEPENDING MODEL)
ACCESSORY USED :
- Assembled grinder (i), (refer to the grinder instruction booklet for details on assembly).
You can use the grinder to :
- Chop in a few seconds by pulsing: dried figs, dried apricots, etc.
Quantity / max time: 100g / 5s
This grinder is not designed for hard products like coffee beans or hard spices.
CLEANING
• Unplug the appliance.
• Do not immerse the motor unit (a) or the attachment (e) in water or under running water. Wipe them with a dry or
slightly damp cloth.
• For easier cleaning, rinse the accessories quickly after use. Dismantle the mincer head assembly fully. Handle the
blades with care to prevent injury.
• Wash, rinse and dry the accessories: they are dishwasher-safe, except for all the metal components in the mincer
head: body (f1), feed screw (f2), blade (f3), screens (f4 and f5), nut (f6).
• The screens (f4) and (f5) as well as the blade (f3) must remain greased. Coat them with cooking oil.
Tips :
• In the event any of your accessories are coloured by food (carrots, oranges, etc.), rub with a cloth soaked in cooking
oil and then clean them as usual.
• Blender jug (d): pour some hot water containing a few drops of washing up liquid into the blender. Close the lid.
Place it on the appliance and pulse a few times. After removing it, rinse the jug in running water and allow to dry
(jug upside down).
STORAGE
Do not store your appliance in a humid environment.
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK
If your appliance does not work, check:
- that it is plugged in correctly.
- that the accessories are correctly locked.
- that the safety cover (a5) is present and locked when the high-speed outlet (a4) is not used.
- that the multi-function head (a3) is locked horizontally.
Your appliance comes with a microprocessor that controls and analyses the operating power. If the load becomes too
high, your appliance will stop automatically. To restart your appliance, turn the speed control (a1) to the “0” position
and remove some of your ingredients. Allow your appliance to cool down for a few minutes. You can then select the
desired speed to complete your preparation.
HELPLINE:
If you have any product problems or queries, please contact our Customer Relations Team first for expert help and advice:
0v845 602 1454 – UK / (01) 677 4003 – Ireland / 02 97487944 - Australia
DISPOSAL OF PACKAGING AND THE APPLIANCE
The packaging is comprised exclusively of materials that present no danger for the environment and
which may therefore be disposed of in accordance with the recycling measures in force in your area.
For disposing of the appliance itself, please contact the appropriate service of your local authority.
13
TE_KITCHEN-8080012365-01.indd 13
5/2/13 8:25 PM
EN
END-OF-LIFE ELECTRICAL OR ELECTRONIC PRODUCTS
Think of the environment!
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
ACCESSORIES
You can customise your appliance and obtain the following accessories from your usual retailer or an authorised
service centre:
Stainless steel bowl
Stainless steel bowl lid
Kneader
Mixer
Balloon whisk
Blender jug
Juice extractor
Grinder
Attachment holder
Mincer head
Vegetable slicer:
- A: Slicer
- C: Coarse grating
- D: fine grating
- E: reibekuchen (potato rosti) grater
Pasta shaping kit
Coulis attachment
Pasta rolling mill
Caution: This booklet contains instructions for additional accessories. Please keep safe for future reference. You
can purchase new or replacement items directly from Tefal Customer Relations.
TELFAL / T-FAL INTERNATIONAL GUARANTEE
Date of purchase
Date d’achat / Fecha de compra / Data da compra / Data d’acquisto / Kaufdatum / Aankoopdatum / Købsdato / Inköpsdatum / Kjøpsdato /
Ostopäivä / Data zakupu / Data vânzării / Įsigijimo data/ Ostukuupäev / Datum nakupa / Sorozatszám / Dátum nákupu / Pirkuma datums /
Datum Kupovine / Datum kupnje / Data cumpărării / Datum nákupu / Tarikh pembelian / Tanggal pembelian / Ngày mua hàng / Satın alma
tarihi / Дата продажи / Дата на закупуване / Датум на купување / Сатылған мерзімі / Ημερομηνία αγοράς / Վաճառքի օրը / วันที่ซื้อ / 購買
日期 / 購入日 / 구입일자 / ‫ءارشلا خيرات‬/ ‫يرخ خيرات‬r
Product reference
Référence du produit / Referencia del producto / Nome do produto / Tipo de prodotto / Typnummer des Gerätes / Artikelnummer van het
apparaat / Referencenummer / Produktreferens / Artikkelnummer / Tuotenumero / referencja produktu / Model / Gaminio numeris / Toote
viitenumber / Tip aparata / Vásárlás kelte / Typ výrobku / Produkta atsauces numurs / Model proizvoda / Oznaka proizvoda / Cod produs /
Produk rujukan / Referensi produk / Mã sản phẩm/ Ürün kodu / Модель / Модель / Модел на уреда / Моделi / Κωδικός προιόντος / Մոդել
/ รุ่นผลิตภัณฑ์ / 產品模型 / 製品レファレンス番号/ 제품명 / ‫ لماكلا جتنملا عجرم‬/ ‫لوصحم لماك عجرم‬
Retailer name & address
Nom et adresse du vendeur / Nombre y dirección del minorista / Nome e endereço do revendedor / Nome e indirizzo del negozzio / Name
und Anschrift des Händlers / Naam en adres van de dealer / Forhandler navn & adresse / Återförsäljarens namn och adress / Forhandler
navn og adresse / Jälleenmyyjän nimi ja osoite / nazwa i adres sprzedawcy / Numele şi adresa vânzătorului / Parduotuvės pavadinimas
ir adresas / Müüja kauplus ja aadress / Naziv in naslov trgovine / Tipusszám / Názov a adresa predajcu / Veikala nosaukums un adrese
/ Naziv i adresa maloprodaje / Naziv i adresa prodavca / Naziv i adresa prodajnog mjesta / Nume şi adresă vânzător / Název a adresa
prodejce / Nama dan alamat peruncit / Nama Toko Penjual dan alamat / Tên và địa chỉ cửa hàng bán / Satıcı firmanın adı ve adresi /
Название и адрес продавца / Назва і адреса продавця / Търговки обект / Назив и адреса на продавницата / Сатушының аты және
мекен-жайы / Επωνυμία και διεύθυνση καταστήματος / Վաճառողի անվանումը և հասցեն / ชื่อและที่อยู่ของห้าง / ร้านที่ซื้อ / 零售商的店名和地址 /
販売店の名前、住所 / 소매점 이름과 주소 / ‫ او هناونع و ةئزجتلا عئاب مسا‬/ ‫ شورف هدرخ سرد مان‬
Distributor stamp
Cachet distributeur / Sello del distribuidor / Carimbo do revendedor / Timbro del negozzio / Händlerstempel / Stempel van de
dealer / Forhandler stempel / Återförsäljarens stämpel / Forhandler stempel / Jälleenmyyjän leima / pieczęć sprzedawcy / Ştampila
vânzătorului / Antspaudas / Tempel / Žig trgovine / Eladó neve, címe/ Razítko predajcu / Zīmogs / Pečat maloprodaje/ Pečat prodavca
/ Pečat prodajnog mjesta / Ştampila vânzătorului/ Razítko prodejce/ Cap peruncit / Cap dari Toko Penjual / Cửa hàng bán đóng
dấu / Satıcı Firmanın Kaşesi / Печать продавца / Печатка продавця / Печат на търговския обект / Печат на продавницата /
Сатушының мөрі / Σφραγίδα καταστήματος / Վաճառողի կնիքը / ตราประทับของห้าง / ร้านที่ซื้อ / 零售商的蓋印 / 販売店印 / 소매점 직인 /
‫ ةئزجتلا عئاب متخ‬/ ‫ورف هدرخ رهم‬
14
TE_KITCHEN-8080012365-01.indd 14
5/2/13 8:25 PM
EN P. 8-14
Ref. 8080012365-01
TE_KITCHEN-8080012365-01.indd 18
5/2/13 8:25 PM
Download PDF