Drench Hose Units - Guardian Equipment

Drench Hose Units
FF G5018 Drench Hose Unit, Wall Mounted
FF G5018BP Drench Hose Unit, Wall Mounted, with Backflow Preventer
Application: Drench hose unit for wall mounting. Ideal for
rinsing any part of user’s eye, face or body. Note: Under ANSI
Z358.1-2014, drench hose units supplement, but do not replace,
other types of emergency equipment.
Spray Head: Single FS-Plus™ spray head. Spray head has
“flip top” dust cover, internal flow control and filter to remove
impurities from the water flow.
Valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve
is US-made with chrome plated brass ball and PTFE seals.
Available Options
FF DC Stainless steel dust cover for spray head.
FF VB In-line vacuum breaker for installation between valve
and spray head.
FF G3600LF Thermostatic mixing valve precisely blends hot
and cold water to deliver warm (tepid) water as required by
ANSI Z358.1-2014. Refer to “Tempering Valves” section for
complete technical and product selection information.
Hose: 12' reinforced nylon retractable coiled hose. 180 PSI
maximum working pressure.
Mounting: Bracket with spring clips holds unit on wall.
Backflow Preventer: In-line L108 dual check backflow
preventer installed on inlet of hose (G5018BP only). ASSE 1024
Listed. Note: Check with code authority for compliance with
local plumbing code.
Supply: 3/8" NPT female inlet.
Sign: ANSI-compliant identification sign.
Quality Assurance: Unit is completely assembled and water
tested prior to shipment.
Guardian Equipment
1140 N North Branch St
Chicago, IL 60642
312 447 8100 TELEPHONE
312 447 8101 FACSIMILE
gesafety.com
Listed 8116. Units have been
tested to and comply with
ANSI Z358.1-2014 and the
Uniform Plumbing Code.
Drench Hose Units
FF G5018 Drench Hose Unit, Wall Mounted
FF G5018BP Drench Hose Unit, Wall Mounted, with Backflow Preventer
25°
11 3/4"
(314mm)
3/8" NPT
FEMALE INLET
5 5/8"
(143mm)
POWDER COATED MOUNTING
BRACKET WITH SPRING CLIPS
(SEE DETAIL "A")
(4) Ø17/64"
(7mm) HOLES
1 1/2"
(38mm)
2 1/8"
(52mm)
3"
(76mm)
1 1/2"
(38mm)
DETACHABLE HANDHELD SPRAY
3/4"
(19mm)
NYLON HANDLE
DETAIL 'A'
MOUNTING BRACKET
FS-PLUS™
SPRAY HEAD
7 7/8"
(200mm)
4 7/8"
(123mm)
POWDER COATED CAST
ALUMINUM FLAG HANDLE
1/2" IPS CHROME
PLATED BRASS STAYOPEN BALL VALVE
NOTES:
1. FS-PLUS™ SPRAY HEAD HAS A "FLIP-TOP" DUST COVER,
INTERNAL FLOW CONTROL AND FILTER TO REMOVE
IMPURITIES FROM THE WATER FLOW.
2. HOSE SHOULD NOT BE USED IN APPLICATIONS WHERE
WATER PRESSURE EXCEEDS 90 PSI. HOSE SHOULD BE
INSPECTED PERIODICALLY FOR DETERIORATION.
3. IF 3/8" IPS X 2-1/2" MOUNTING SHANK IS REQUIRED,
ADD SUFFIX "WSA".
12 FT. (3658)
RETRACTABLE
NYLON COILED HOSE
11.00
Sign Included
THIS SPACE FOR ARCHITECT/ENGINEER APPROVAL
Due to continuing product improvement, the information contained in this document
is subject to change without notice. All dimensions are ± 1/4" (6mm).
rev. 1117
Guardian Equipment
1140 N North Branch St
Chicago, IL 60642
312 447 8100 TELEPHONE
312 447 8101 FACSIMILE
gesafety.com
Listed 8116. Units have been
tested to and comply with
ANSI Z358.1-2014 and the
Uniform Plumbing Code.