Industrial Vacuum 55 Gallon Drum Adapter Kit Instruction Manual

INSTRUCTION MANUAL
MODEL #860250
55 GALLON DRUM
ADAPTER KIT
OPERATING INSTRUCTIONS
Inspection
Thoroughly inspect your machine for any shipping damage. Your machine has already been thoroughly
tested at the Nikro Industries manufacturing plant prior to shipping.
Electrical Specification
This machine 1s designed to operate on a 15 amp. 115V., 60 hz., AC circuit. A deviance of this could
cause serious damage to the unit.
Grounding Instructions
This machine is equipped with a grounding type cord and three
prong plug. Make sure that the plug is connected to an outlet with
three receptacles designed for use with the three prong plug. (See
Illustration) Never use an adapter with machine.
Maintenance
Lubrication of this motor is not required as it is equipped with sealed bearings.
Always keep the air cooling intake screen free, not allowing any restriction of airflow. Airflow restriction
will overheat and damage the motor.
To prolong the life of the H.E.P.A. filter, empty, clean, and replace bags and filters regularly as described
in the following sections.
SAFETY INSTRUCTIONS
Read all safety instructions before using!
1. Electrical shock could occur if used outdoors or on wet surfaces.
2. Always store machine indoors in a dry area. If machine is dropped in water or left in rain, it should be
serviced by an authorized service technician prior to plugging the unit in.
3. Prior to plugging in machine, always inspect cord for cuts and exposed wires. If these problems are
found, return the machine to an authorized service technician..
4. Never use the cord as a handle, or pull the machine by using the cord.
5. Never unplug this machine or any other electrical appliance by pulling on the cord.
6. Do not wrap the cord around the dome. Wrapping the cord around the dome will restrict the motor
from exhausting properly and will result in overheating and damaging the motor.
7. Keep hair, fingers, and other objects away from all moving parts and openings on this machine.
8. This vacuum cleaner should never be used in explosion-hazardous areas or to pick up combustible or
flammable liquids such as gasoline, etc.
9. Never leave the machine unattended when plugged in or running.
10. Always have the switch in the OFF position before unplugging the unit.
11. Do not operate this machine with any of the openings blocked; always keep these areas free of lint and
dust or any other particles that could reduce the airflow.
12. Never operate or plug in this machine or any other electrical appliance with wet hands or when
standing in water.
13. This machine should never be operated without the proper filters installed in the manner described in
the following pages of this manual.
14. This machine should never be serviced by anyone other than an authorized technician.
15. Use only original NIKRO replacement parts and attachments.
OPERATION INSTRUCTIONS
1) PLUG IN POWER CORD
2) ON/OFF SWITCH IS LOCATED ON THE MOTOR DOME.
3) MAKE SURE THE VACUUM LID IS SECUREL ¥ IN PLACE ON THE VACUUM
TANK.
4) PLACE METAL HOSE CUFF END OF HOSE INTO THE VACUUM INTAKE
AND SECURE IT WITH THE INTAKE KNOB.
5) TURN ON THE UNIT.
6) PLACE DESIRED VACUUM TOOLS INTO THE PLASTIC HOSE CUFF
7) WHEN PICKING UP DRY MATERIALS, THE FOAM FILTER BAG AND
WHITE DACRON BAG SHOULD BE USED.
8) WHEN PICKING UP WET MATERIALS, USE ONLY THE FOAM FILTER BAG.
REFERENCE
1
2
3
4
5
6
7
8
9
10
11
PART NO.
520001
520010
520015
520004
520016
520304
520029
520365
520029
520013
520214
DESCRIPTION
MOTOR DOME
POWER CORD
TOGGLE SWITCH
DOME FELT
FOAM RIGN
MOTOR HOLD DOWN
UPPER MOTOR GASKET
MOTOR
LOWER MOTOR GASKET
STAIN RELIEF
LARGE SPACER
QTY. REQ.
1
1
1
1
1
1
1
1
2
1
4
''
REFERENCE
PART NO.
DESCRIPTION
QTY. REQ.
1
860466
LID W/MTG. PLATE & GASKET
1
2
520018
LID GASKET
1
3
520014
LID EDGING GASKET
1
4
550013
FLOAT MOUNTING PLATE
1
5
520310
FLOAT
1
6
520309
FLOAT CAGE
1
7
860792
BAG CLAMP
1
8
550015
FOAM FILTER BAG
1
9
520210
DACRON FILTER BAG
1
LID ASSEMBLY
#550015
FOAM FILTER BAG
#520210
DACRON FILTER BAG
#520360
55 GALLON ADAPTOR RING
(520360 CONSISTS OF;)
A. #520306 55 GAL ADAPTOR RING
B. #860582 ADPT. RING GASKET (76”)
C. #520220 INTAKE
D. #520217 INTAKE KNOB
E. #520216 INTAKE GASKET
F. #540001 DOWN TUBE ELBOW
G. #520019 LID LATCH (2 REQ.)
55 GALLON DRUM
(OPTIONAL)
DRUM DOLLY
(OPTIONAL)
DRUM SET-UP
FOR DRY PICK UP
WARRANTY
Nikro equipment is warranted for 1 year from the date delivered to the original
purchaser. Parts, which become defective due to faulty workmanship or materials during
normal use in these years will be repaired or exchanged at no charge if returned and
approved by an authorized Nikro service center. The freight shall be at the expense of the
customer.
This warranty does not apply to normal wear and tear, neglect, misuse, or
incorrect installation. If any other replacement parts, filters or attachments are used other
an original Nikro parts, this warranty will become void.
This warranty does not apply to hoses, switches, lights, sensors, or breaks in cords. All
motors are subject to manufacturer’s warranty. Contact Nikro Industries for assistance
with these items.
Nikro disclaims responsibility for loss of production, profits, or any other costs
that may indirectly occur due to the failure of this product.
Download PDF

advertising