Climate chambers
ALWAYS AN EYE ON LONG-TERM STABILITY.
CONSTANT CLIMATE CHAMBER HPP
HUMIDITY CHAMBER HCP
CLIMATE CHAMBER ICH
ENVIRONMENTAL TEST CHAMBER CTC/TTC
100% ATMOSAFE. MADE IN GERMANY.
www.memmert.com | www.atmosafe.net
2
Reliable.
Precise.
100%
AtmoSAFE.
Perfect simulation of reality.
Reproducable, standard compliant, economic.
Each climate chamber creates a climate of temperature and
­humidity. For Memmert climate chambers, however, that is not
enough. Each individual climate chamber is perfectly designed
for the high requirements of stability and climate tests, con­
ditioning or ageing. In each individual appliance, there is a
­homogenous and stable temperature and humidity distribution
over the entire chamber. Operation, programming and documentation options feature top-notch convenience. Each individual
Memmert climate chamber complies with the strict requirements
of DIN 12880:2007-05 and is equipped with a maximum of
­safety functions. Each individual Memmert climate chamber is
100% AtmoSAFE.
CONTENTS
CONSTANT CLIMATE CHAMBER HPP
PAGE 4 TO 5
TECHNICAL DATA
PAGE 6 TO 7
Stability testing (according to ICH Q1A) in the pharmaceutical industry,
­l­ong-term storage, growing plants, conditioning and climate testing of plastic
material/metal/composite material, storage of electronic components/lacquers/
coatings in controlled environment
HUMIDITY CHAMBER HCP
PAGE 8 TO 9
TECHNICAL DATA
PAGE 10 TO 11
Conditioning and climate testing of plastic material/metal/composite ­
material, stability testings in the pharmaceutical industry, storage of
electronic components/­lacquers/coatings in controlled environment
CLIMATE CHAMBER ICH
PAGE 12 TO 13
TECHNICAL DATA
PAGE 14 TO 15
Stability testing (according to ICH Q1A) and photostability testing
(according to ICH Q1B) in the pharmaceutical industry, long-term storage,
conditioning and climate testing of plastic material/metal/composite material,
storage of electronic components/lacquers/coatings in controlled environment
CLIMATIC TEST CHAMBER CTC
TEMPERATURE TEST CHAMBER TTC
PAGE 16 TO 17
TECHNICAL DATA
PAGE 18 TO 19
Accelerated and intermediate tests, alternate stability testing, conditioning
and ­climate-/temperature testing of plastic material/metal/composite material, ­
storage of electronic components/lacquers/coatings in controlled environment
with/without humidity
DECISION-MAKING-AID PAGE 20
Decision-making-aid for appliances with controlled humidity
OPTIONS AND ACCESSORIES PAGE 20 TO 22
Options and accessories available for all products
FEATURES MODEL VARIANTS
SingleDISPLAY and TwinDISPLAY
PAGE 23
3
4
C O N S TA N T C L IMATE
P ELTIER
ECOLOGICA L
ECONOMICA L
Constant climate chamber HPP
with TwinDISPLAY
AtmoCONTROL software
Model sizes: 110 / 260 / 750
0 °C to +70 °C
Humidity 10 to 90 % rh
optional with LED light module
CONSTANT CLIMATE CHAMBER HPP They are simply
unbeatable in energy efficiency. Furthermore, as constant
­climate chambers HPP have a very long, almost maintenance
free service life, they are perfectly suited for stability tests,
storage in controlled environment and conditioning. The high
precision temperature control from 0 °C to +70 °C as well as
active humidification and dehumidification from 10 % to 90 %
rh were particularly adapted to the ICH guidelines, option Q1A,
for stability tests.
S TAB I LI T Y T ES T I NG
ICH
C LI M AT E T E S T I N G
The best climate for samples, environment and budget
Almost without vibrations and extremely quiet, the specially adapted Peltier technology heats
up and cools down seamlessly in one system. In this respect, the innovative constant climate
chamber HPP not only contributes to climate protection, but it also achieves an additional
decrease in operating costs of up to 90 % compared to compressor technology.
Cost effective climate protection
The main part of stability testing is performed at temperatures between +20 °C and +30 °C
– close to the ambient temperature. The impressive cost effectiveness of Peltier technology can
be seen here, since only small amounts of energy are required to raise or lower the temperature
slightly, in comparison with compressor technology. Due to its environmentally friendly Peltier
elements, the HPP has no need for coolants and requires no regular maintenance.
Comparison between compressor and Peltier technology
Reduction in energy consump­
tion of up to 90 %
250 Watt
200 Watt
150 Watt
100 Watt
Compressor technology
Peltier technology
50 Watt
0 Watt
5 °C
20 °C
60 °C
30 °C
Top level optimisation
The outstanding precision of the constant climate chambers was optimised with the introduction
of our new appliances. If required, the Peltier elements can be controlled individually to ensure
even more homogenous temperature and humidity distribution inside the chamber.
For supporting IQ/OQ/PQ validation, temperature and humidity control can be adjusted directly
on the ControlCOCKPIT with three free-selectable measuring points.
LED light module:
Innovative and
environmentally friendly
Temperature-humidity working range
relative humidity (%)
100
90
80
Dimmable LED light in two alternative colour
temperatures protects the environment,
reduces energy consumption and ensures
ideal conditions of growth in models HPP
with light. Available alternatives:
Cold-white light (6,500 K), warm-white light
(2,700 K) or cold-white plus warm-white light,
dimmable in 1 % steps.
70
60
50
40
30
20
10
0
0
10
20
30
40
50
60
T emperature and humidity test points
defined in the guideline ICH
70
80
90
Temperature (°C)
5
6
T E C H N I C AL DATA
OV ERV IEW
CONS TA NT CLIMAT E CH A MBERS H PP
CONSTANT CLIMATE CHAMBERS HPP
(93)
F
D
A
Internals:
256
Standard equipment
Interior:Stainless steel, mat. 1.4301 (ASTM 304),
deep-drawn
2 stainless steel grids
56
C
(93)
319
according to DIN 12880:2007-05, EN 61010-1 (IEC 61010-1), 61010-2-010
10
Connection:
B
Double doors:Outside stainless steel, fully insulated,
inside glass (size 750 two-leaves)
352
E
Housing:Textured stainless steel, rear zinc-plated
steel, intuitively operated TwinDISPLAY
(TFT colour display) with touchscreen
Mains cable with plug
Installation:4 feet; size 750 mounted on lockable
castors
Interfaces:
Ethernet
30
USB
LAN
HPP110: 2 Peltier elements in the rear
HPP260: 3 Peltier elements in the rear
HPP750: 6 Peltier elements in the rear
Model sizes/Description
Stainless steel
interior
110
260
750
approx. l
108
256
749
Width(A)
mm
560
640
1040
Height(B)
mm
480
800
1200
mm
400
500
600
Volume
Depth (less 10 mm for fan – Peltier)
Textured stainless
steel exterior
Further data
number
Max. number of grids/shelves
number
Packing data
5
9
14
kg
Max. loading of chamber
kg
150
Width(D)
mm
745
824
1224
Height (size 750 with castors)
(E)
mm
864
1183
1726
Depth (without door handle), door handle + 56 mm
(F)
mm
674
774
874
approx. W
650
820
1200
Electrical load at 230/115 V, 50/60 Hz
20
30
200
Working-temperature range without light
°C
0 (at least 20 below ambient temperature) to +70
Working-temperature range with light
°C
+15 to +40
Setting temperatur range
°C
0 to +70
°C
0.1
Adjustment range humidity without light
% rh
10 to 90
Adjustment range humidity with light
% rh
10 to 85
Setting accuracy humidity
% rh
0.5
k
Water tank including connection hose
Net weight
approx. kg
77
122
208
Gross weight (packed in carton)
approx. kg
102
173
279
Width
approx. cm
83
93
133
Height
approx. cm
105
138
191
Depth
approx. cm
80
93
105
HPP110
HPP260
HPP750
Order No. Constant Climate Chambers
Jan-2016
2
Max. loading per grid/shelf
Setting accuracy temperature
Standard accessory
(C)
Stainless steel grids (standard equipment)
T EC HNI C AL DATA
Options
OV ERV I EW
110
260
Voltage 115 V, 50/60 Hz
750
–
K1
T7
T8
T9
R3
F0
F1
F2
F3
F4
F5
F6
F7
V3
V6
V7
D00105
C9
110
260
750
Stainless steel grid (standard equipment)
E20165
E28891
E20182
Additional reinforced stainless steel grid, max. loading 60 kg; size 750 with guide bars and fixing screws
(only in connection with option K1). Please consider max. loading of chamber
E29767
E29766
B32190
Perforated stainless steel shelf
B00325
B29725
B00328
Additional reinforced stainless steel shelf, max. loading 60 kg; with guide bars and fixing screws
(only in connection with option K1). Please consider max. loading of chamber
Stainless steel slide-in drip tray, 15 mm rim (may affect the temperature distribution)
– cannot be used in connection with option K1
Max. loading per slide-in drip tray (kg)
Stainless steel slide-in drip tray, 15 mm rim, with guide bars and fixing screws
(can be used only in connection with option K1)
Stainless steel bottom drip tray, 15 mm rim (may affect the temperature distribution)
– cannot be used in connection with option K1
Max. loading per bottom drip tray (kg)
–
E29726
E02075
3
4
8
–
B04359
B32763
B29722
3
Holder for water tank for mounting on the rear of the appliance or the wall (connection lead 0.5 m);
additional water tank included. Standard equipment for size 750
Central water supply with filter cartridges for connection to the domestic water supply
Product information on demand
Central water supply without filter cartridges for connection to the domestic water supply
(only for demineralised water in accordance with VDE 0510/DIN EN 50272).
Product information on demand
Further options/accessories see pages 20 - 22
B32191
E02073
Stainless steel bottom drip tray, 15 mm rim (can be used only in connection with option K1)
Guarantee extension by 1 year
7
X2
Chamber modification for the application of reinforced perforated stainless steel shelves or stainless steel
grids (bearing rails mounted in the working chamber) – includes replacement of 2 standard grids
by 2 reinforced grids
Light module cold white 6,500 K: light strips arranged on the side walls of the interior, 10 for model 110,
14 for model 260/750, programme-controlled dimming from 0 to 100 % (in 1 % steps), ramp programming
in combination with temperature and humidity
Light module cold white 6,500 K + warm white 2,700 K: LED light strips – 10 for model 110 to 14 for
model 260/750 – (5 resp. 7 alternating cold white light strips and 5 resp. 7 warm white light strips)
on the side walls of the interior, programme-controlled dimming from 0 to 100 % (in 1 % steps),
ramp programming in combination with temperature and humidity
Light module warm white 2,700 K: light strips arranged on the side walls of the interior, 10 for model 110,
14 for model 260/750, programme-controlled dimming from 0 to 100 % (in 1 % steps), ramp programming
in combination with temperature and humidity
Interior socket, ampacity 230 V/2.2 A, can be switched off with the On/Off switch,
cannot be switched individually, moisture tight IP68
Entry port, 23 mm clear diameter, for introducing connections at the side, moisture tight,
can be closed by flap and silicone stopper, standard positions
(F0 und F2 not for model sizes 110 und 260 with light module)
left centre/centre
left centre top
right centre/centre
right centre top
Entry port, 23 mm clear diameter for introducing connections, moisture tight,
can be closed by flap and silicone stopper (please, state location) left
right
rear
Entry port (silicone), 40 mm clear diameter, for introducing connections, moisture tight,
can be closed by silicone stopper, at the back (please, state location)
4 – 20 mA current loop interface (-10 to +80 °C 4 to 20 mA)
Temperature controller, actual value
Temperature of a Pt100 sensor positioned flexibly in chamber for external temperature monitoring
(max. 3 TwinDISPLAY)
Humidity controller, actual value (0 – 100 % rh 4 – 20 mA)
Works calibration certificate for one (freely selectable) temperature and humidity value
Standard works calibration certificate (measuring point chamber centre) at +10 °C,
+37 °C as well as 60 % rh at +30 °C
Compressed air dehumidification (efficient dehumidificaiton of the interior by means of compressed air)
Standard works calibration certificate (measuring point chamber centre) at +10 °C with 10 % rh
Accessories
C ONS TANT C LI MAT E C H A M B E R S H P P
B04362
4
8
–
B34055
B32371
–
ZWVR6
ZWVR7
GA1Q5
GA2Q5
Jan-2016
8
R A M P P RO G RAMMIN G
STER ILIS AT ION ROUT INE
Humidity chamber HCP
“Celsius” standard software
Model sizes: 108 / 153 / 246
+20 °C to +90 °C (with humidity)
+20 °C to +160 °C (without humidity)
Humidity 20 to 95 % rh
HUMIDITY CHAMBER HCP Applications for humidity
chambers range from construction physics to corrosion testing
and down to biological research. Ramp programming for
­temperature and humidity, active humidity control between
20 % and 95 % rh as well as exact temperature control of up to
+90 °C ensure a controlled, physiologically ideal environment
for the simulation of real conditions. Without humidity, the
­temperature in humidity chambers HCP can be controlled to up
to +160 °C.
C OR R OS I ON T ES T I NG
S I MULAT ED C LI MAT E
HUMI DI T Y I N C U BAT I O N
Homogeneity in the chamber
Heating the working chamber from all six sides is essential for preventing condensation.
An aluminium thermal conduction layer supports the optimal temperature distribution,
and serves as a heat accumulator in case of a temporary power failure. Turbulence-free
ventilation additionally supports the homogenous atmosphere in the working chamber.
Germ-free through sterilisation
Particularly in highly-sensitive applications with organic chamber loads, hygiene is the decisive
factor. Cross contamination must be excluded. Therefore, the chamber including ventilation
­system and all sensors can be sterilised in a 4-hour programme at +160 °C.
Ramp programming
Essential for the exact simulation of environmental conditions in research: user-friendly ramp
programming. Thanks to the “Celsius” standard software, an unlimited amount of different set
values of temperature and humidity can be combined on time ramps.
Ramp programming
°C
90
50
Temperature-humidity working range
relative humidity (%)
1
2
3
4
5
100
90
80
70
20
rh %
90
60
50
40
30
50
20
10
0
10
0
10
20
30
40
50
60
70
80
90
Temperature (°C)
9
10
T E C H N I C AL DATA
OV ERV IEW
H UMID IT Y CH A MBE RS H CP
HUMIDITY CHAMBERS HCP
with automatic sterilisation (with all interior fittings incl. humidity sensor sterilised inside the humidity chamber!)
according to DIN 12880:2007-05, EN 61010-1 (IEC 61010-1), 61010-2-010
supply cable
parallel interface
USB port
Standard equipment
Interior:Stainless steel, material 1.4301 (ASTM 304),
deep-drawn,electropolished
Internals:
25
2 perforated stainless steel shelves
H2O
inner
glass door
Housing:Textured stainless steel, rear zinc-plated steel,
aesthetic functional glass-stainless steel operating
panel with multifunction display and input module;
fully insulated stainless steel door and inner glass door
Connection:
Mains cable with plug
Installation:
4 adjustable feet
Interfaces:
USB
parallel interface
Optional
Ethernet
LAN
adjusting screw
Model sizes/Description
Stainless steel
interior
electropolished
Volume
approx. l
153
246
108
153
246
Width(A)
mm
560
480
640
Height(B)
mm
480
640
640
mm
400
500
number
5
Depth (less 25 mm for fan)
(C)
Provision for stainless steel grids or shelves
Textured stainless
steel exterior
108
Width(D)
mm
710
630
790
Height (variable through adjustable feet)
(E)
mm
778
938
938
Depth (without door handle, door handle 38 mm)
(F)
mm
550
650
750
Fully insulated, heated stainless steel door
k
Extra internal glass door
k
Ventilation
Uniform atmosphere and temperature distribution through enclosed
non-turbulent ventilation system, fully covered by the sterilisation process
k
Temperature
Electronic microprocessor temperature controller
with Pt100 and auto-diagnostic system
Temperature sensors Pt100 Class A in 4-wire circuit for uninterrupted
operation on failure of one Pt100 with warning indication
k
Temperature range with humidity control
Temperature range without humidity control:
during sterilisation the temperature is fixed at +160 °C – set value
Temperature fluctuations with time
(to DIN 12880:2007-05)
Temperature variation in chamber at +50 °C
(to DIN 12880:2007-05)
Sterilisation
Humidity
Jan-2016
600
7
double
°C
from +20 to +90 (temperature at 8 above RT to +90)
°C
from +20 to +160 (temperature at 8 above RT to +160)
K
≤ ± 0.1
K
≤ ± 0.3
STERICard for automatic chamber sterilisation cycle
4 h at +160 °C (not for sterilising the load!)
k
Capacitive humidity sensor (sterilisable)
k
Active microprocessor control for humidifying and dehumidifying
(20 – 95 % rh), incl. digital indication and auto-diagnostic system
ensures even more rapid reaching of set humidity and very short
recovery times while avoiding condensate formation; humidity supply
with distilled water (from an external tank) by a self-priming pump;
integral bacteria block by generating hotsteam, dehumidifying via
sterile filter.
k
T EC HNI C AL DATA
Model sizes/Description
Monitor
108
OV ERV I EW
HUMI DI T Y C H A M B E R S H C P
153
Microprocessor temperature monitor acting as overtemperature protection
(protection class 3.1), with Pt100 incorporating fault diagnostics with
visual and audible alarm
k
Digital over- and undertemperature monitor
k
Temperature monitoring band automatically linked to the setpoint (ASF)
k
Relay for reliable heating cut-off in case of fault
k
Mechanical temperature limiter (TB)
k
Audible alarm: Over- and undertemperature, underhumidity,
open door and empty water tank
k
Timer functions
Real-time/weekly programmer with group function
(e.g. Monday – Friday), programme operation with up to
40 ramps for temperature and humidity (MEMoryCard XL)
k
Documentation
Internal log memory 1024 kB as ring memory for all setpoints,
actual values, errors, settings with real-time and date;
capacity approx. 3 months at 1 min intervals.
Parallel printer interface for printing logging files, suitable for all PCL3compatible ink jet printers (USB available via converter, see accessories)
“Celsius“ software for control and documentation
of temperature and relative humidity.
Setup
k
k
k
Setting of language for dialogue and display DE / EN / ES / FR / IT
k
Electrical load at 230/115 V (50/60 Hz)
Standard accessories
Perforated stainless steel shelves
approx. W
1000
number
Net weight
1500
2000
2
k
Works calibration certificate (test point chamber centre at +60 °C)
Packing data
246
k
Calibration (no separate PC required), Temperature: 3-point calibration
on controller, Humidity: 2-point calibration at 20 % and 90 %
Further data
approx. kg
70
80
110
Gross weight (packed in carton)
approx. kg
95
106
132
Width
approx. cm
83
83
93
Height
approx. cm
105
130
114
Depth
approx. cm
80
80
93
HCP108
HCP153
HCP246
108
153
246
Order No. Humidity Chambers
Options
Voltage 115 V, 50/60 Hz
X2
Door hinged on the left
B8
Entry port, 23 mm clear diameter, for introducing connections at the side, moisture tight,
can be closed by flap and silicone stopper, standard positions left centre/centre, left centre top,
right centre/centre, right centre top
Entry port (silicone), 40 mm clear diameter, for introducing connections, moisture tight,
can be closed by silicone stopper, at the back (please, state location)
F0,F1,F2,F3
F7
Works calibration certificate for 80 % rh (measured at +50 °C)
D00107
Start-up of HCP and brief training (D, A, CH only) through MEMMERT service
K9
Stacking version for 2 units of equal size (bottom unit modification)
G3
Process-dependent electromagnetic door lock
D4
Accessories
Additional perforated stainless steel shelf
108
153
246
B00325
B00321
B03813
Additional stainless steel grid
E20165
E20166
E29766
Subframe, adjustable in height (622 mm high)
B02792
B02732
B02793
Subframe (130 mm high for 2 stacked cabinets)
B02794
B02740
B02795
STERICard (additional or as replacement) for automatic
chamber sterilisation cycle (not for sterilising the load!)
Central water supply with filter cartridges for connection to the domestic water supply
Product information on demand
Central water supply without filter cartridges for connection to the domestic water supply
(only for demineralised water in accordance with VDE 0510/DIN EN 50272).
Product information on demand
Further options/accessories see pages 20 - 22
11
E04337
ZWVR6
ZWVR7
Jan-2016
12
C O N S TAN T C L I MATE
L IG HT
CO 2 CONT ROL
Climate chamber ICH
with TwinDISPLAY + AtmoCONTROL software
Model sizes: 110 / 260 / 750
ICH with humidity control
ICH L with humidity control and light
ICH Cwith humidity and CO2 control
Temperature range with humidity
ICH +10 °C to +60 °C
ICH L +10 °C to +60 °C
ICH C +10 °C to +50 °C
Humidity range 10 – 80 % rh
Temperature range without humidity
ICH -10 °C to +60 °C
ICH L 0 °C to +60 °C
ICH C+10 °C to +50 °C
CLIMATE CHAMBER ICH Compressor-cooled stability
test chambers developed by M
­ emmert stand out due to their
unparalleled temperature and humidity homogeneity for longterm stable ambient conditions. The climate chamber ICH has
been specially designed for t­esting pharmaceutical products
according to ICH, Q1A and Q1B, option 2, and similar global
standards for stability tests of cosmetics and food.
S TAB I LI T Y T ES T I NG
ICH
C LI M AT E T E S T I N G
All-round protection of samples
No icing, no drying out of samples, no dehumidification
of the working chamber. Cooling aggregate and heating
of the ICH are situated outside the working chamber in
the air jacket surrounding the entire chamber thus ensur­
ing quick and precise temperature control. Furthermore,
the motor-driven forced air circulation, adjustable in
10 % steps, ensures particularly homogenous temperature distribution.
For supporting IQ/OQ/PQ validation, the control
can be adjusted directly on the appliance:
on models ICH, ICH L, ICH C of size 110/260: for three
free-selectable values each, temperature/humidity/CO2
on models ICH, ICH L, ICH C of size 750: for three
free-selectable values each, temperature/humidity;
for two selectable values CO2
ICH air jacket system
Illumination complies with ICH Q1B, option 2
For tests in accordance with ICH Q1B, option 2, an illumination unit is available for model
ICH L. Fluorescent lights with cold-white light (standard illuminant D65, 6,500 K) as well as
UV radiation in the spectral range of 320 – 400 nm, serve as light source.
Model ICH C with CO2 control
In addition to the features of the basic model ICH, the ICH C model is equipped with
an electronic CO2 control with automatic zero setting, NDIR measurement system,
auto-diagnostic system, acoustic alarm and air pressure compensation.
Temperature-humidity working range
relative humidity (%)
100
90
80
70
60
50
40
30
20
10
0
0
10
20
30
40
50
60
T emperature and humidity test
points defined in the ICH guideline
70
80
90
Temperature (°C)
13
14
T E C H N I C AL DATA
OV ERV IEW
CLIMAT E CH A MBERS ICH
CLIMATE CHAMBERS ICH
according to DIN 12880:2007-05, EN 61010-1 (IEC 61010-1), 61010-2-010
D
(93)
F
(93)
A
Internals:
256
Standard equipment
Interior:
Stainless steel, mat. 1.4301 (ASTM 304), deep-drawn
2 stainless steel grids
56
C
33
Housing:Textured stainless steel, rear zinc-plated steel,
intuitively operated TwinDISPLAY (TFT colour display)
with touchscreen
Mains cable with plug
Installation:
Mounted on lockable castors
Interfaces:
Ethernet
E
Connection:
B
Double doors:Outside stainless steel, fully insulated, inside glass
(size 750: two-leaves)
USB
LAN
135
Model sizes/Description
Stainless steel
interior
Textured stainless
steel exterior
Further data
750
108
560
480
400
256
640
800
500
2
9
749
1040
1200
600
150
Width(D)
mm
745
824
1224
Height (with castors)
(E)
mm
1233
1552
1950
Depth (without door handle), door handle + 56 mm
(F)
Entry port (silicone), 40 mm clear diameter, for introducing connections,
moisture tight, can be closed by a silicone stopper, standard position
mm
634
734
834
5
approx. W
Electrical load at 230/115 V, 50/60 Hz ICH L
200
approx. W
1350
1450
1530
Working temperature range ICH / ICH L with humidity and/or light
°C
+10 to +60
Working temperature range ICH C with and without humidity
°C
+10 to +50
Working temperature range without humidity ICH (not suitable for
long-term storing at sub-zero temperatures. During permanent operation,
the glass door may ice over)
°C
-10 to +60
Working temperature range without humidity ICH L
°C
0 to +60
Setting temperature range ICH
°C
-10 to +60
Setting temperature range ICH L
°C
0 to +60
Setting temperature range ICH C
°C
+10 to +50
Setting accuracy
°C
0.1
Adjustment range humidity
% rh
10 to 80
Setting accuracy humidity
% rh
0.5
Illumination unit (only model ICH L) acc. ICH Q1B option 2;
separately switchable via controller, one box
Number of fluorescent lights with cold white light size 110: 3, sizes 260/750: 4
Number of fluorescent lights with UV lamps all sizes: 2
Water tank including connection hose
14
30
20
k
Electrical load at 230/115 V, 50/60 Hz ICH and ICH C
Setting accuracy CO2 (only model ICH C)
Jun-2015
260
Volume
approx. l
Width(A)
mm
Height(B)
mm
Depth (less 33 mm for fan)
(C)
mm
Stainless steel grids (standard equipment)
number
Max. number of grids/shelves
number
Max. loading per grid/shelf
kg
Max. loading of chamber
kg
Digital electronic CO2 control with autozero, NDIR system,
with auto-diagnostic system and acoustic fault indication,
barometric pressure compensation (only ICH C), adjustment range
Control accuracy
0 – 10 % CO2
11 – 15 % CO2
Standard accessories
110
% CO2
0 to 20
0 to 10
%
+/- 0.2
+/- 0.5
+/- 0.3
–
% CO2
0,1
standard illuminant D65, 6,500 K
spectral range of 320 to 400 nm
k
T EC HNI C AL DATA
Model sizes/Description
Packing data
Net weight
Gross weight (packed in carton)
Width
Height
Depth
approx. kg
approx. kg
approx. cm
approx. cm
approx. cm
Order No. Climate Chambers
ICH = Climate chamber
ICH L = Climate chamber with light
ICH C= Climate chamber with CO2 control
Options
OV ERV I EW
C LI MAT E C H A M B E R S I C H
110
260
750
109
137
88
141
81
160
217
93
176
93
249
319
133
215
105
ICH110
ICH260
ICH750
ICH110L
ICH260L
ICH750L
ICH110C
ICH260C
ICH750C
110
260
750
Voltage 115 V, 50/60 HZ
Chamber modification for the application of reinforced perforated stainless steel shelves or stainless steel grids
(bearing rails mounted in the working chamber) – includes replacement of 2 standard grids by 2 reinforced grids
(only ICH and ICH C)
Illumination unit (has to be ordered together with the chamber) consisting of 4 fluorescent lights
with cold white light (standard illuminant D65, 6,500 K) and 2 UV lamps in the spectral range
of 320 to 400 nm, in accordance with ICH Q1B, option 2;
separately switchable via controller (only ICH L)
second box
Alternative light boxes (replace the standard lighting; have to be ordered together with the chamber);
number of fluorescent lamps: size 110: 5, sizes 260/750: 6,
with cold white light (standard illuminant D65, 6.500 K) (only ICH L)
one box
second box (cannot be switched on separately)
Alternative light boxes (replace the standard lighting; have to be ordered together with the chamber);
number of UV lamps: size 110: 5, sizes 260/750: 6 in the spectral range
of 320 to 400 nm (only ICH L)
one box
second box (cannot be switched on separately)
Interior socket, ampacity 230 V/2.2 A, can be switched off with the On/Off switch,
cannot be switched individually, moisture tight IP68
Entry port, 23 mm clear diameter, for introducing connections at the side, moisture tight,
can be closed by flap and silicone stopper, standard positions
(F1 and F3 not for models ICH L)
left centre/centre
left centre top
right centre top
Entry port (silicone), 40 mm clear diameter, for introducing connections, moisture tight,
can be closed by silicone stopper, at the back (please, state location)
4 – 20 mA current loop interface (-20 to +70 °C 4 to 20 mA)
(Models ICH C max. 2 interfaces – only combination V3 + V7 or V3 + V9 possible)
Temperature controller, actual value
Temperature of a Pt100 sensor positioned flexibly in chamber for external temperature monitoring
(max. 3 TwinDISPLAY)
Humidity controller, actual value (0 – 100 % rh 4 – 20 mA)
CO2 controller, actual value (0 – 25 % CO2 4 – 20 mA)
X2
–
T72
T81
–T82
T01
–T02
R3
F0
F1
–F3
F7
V3
V6
V7
V9
V4
Works calibration certificate for one (freely selectable) temperature and humidity value
Standard works calibration certificate (measuring point chamber centre) at +10°C, +37 °C and +30 °C with 60 % rh
Compressed air dehumidification
(efficient dehumidificaiton of the interior by means of compressed air – for models ICH and ICH L)
Standard works calibration certificate (measuring point chamber centre) at +10 °C with 10 % rh
Stainless steel grid (standard equipment)
Additional reinforced stainless steel grid, max. loading 60 kg; size 750 with guide bars and fixing screws
(only in connection with option K1). Please consider max. loading of chamber
Stainless steel shelf
Additional reinforced stainless steel shelf, max. loading 60 kg; with guide bars and fixing screws
(only in connection with option K1). Please consider max. loading of chamber
Stainless steel slide-in drip tray, 15 mm rim (may affect the temperature distribution)
– cannot be used in connection with option K1
Max. loading per slide-in drip tray (kg)
Stainless steel slide-in drip tray, 15 mm rim, with guide bars and fixing screws (can be used only in connection with option K1)
Stainless steel bottom drip tray, 15 mm rim (may affect the temperature distribution)
– cannot be used in connection with option K1
Max. loading per bottom drip tray (kg)
Stainless steel bottom drip tray, 15 mm rim (can be used only in connection with option K1)
Holder for water tank for mounting on the rear of the appliance or the wall (connection lead 0.5 m);
additional water tank included. Standard equipment for size 750
Central water supply with filter cartridges for connection to the domestic water supply. Product information on demand
Central water supplywithout filter cartridges for connection to the domestic water supply
(only for demineralised water in accordance with VDE 0510/DIN EN 50272). Product information on demand
Further options/accessories see pages 20 - 22
K1
–
Fan speed monitoring with switching off the heating and with alarm in case of failure
Accessories
15
D00121
C9
110
260
750
E20165
E28891
E20182
E29767
E29766
B32190
B00325
B29725
B00328
–
B32191
E02073
E29726
E02075
3
4
8
B32763
B29722
B04362
4
–
8
B34055
B32371
–
–
B04359
3
ZWVR6
ZWVR7
Jan-2016
16
A LT E R N ATIN G C L I MATE
RAMP PROGRA MMING
PLUS /MINUS T E MPE RAT UR ES
Climatic test chamber CTC
with humidity control
Temperature test chamber TTC
“Celsius” standard software
Model size: 256
- 42 °C to +190 °C (without humidity)
+10 °C to +95 °C (CTC with humidity)
Humidity 10 to 98 % rh (CTC)
CLIMATIC TEST CHAMBER CTC / TEMPERATURE
TEST CHAMBER TTC 100% AtmoSAFE: In Memmert environmental test chambers CTC and TTC, the perfect atmosphere
for climate and temperature tests, specifically in accordance with
DIN EN 60068-2-1, 2-2 and 2-3 are simulated. Ramp o­ peration,
active humidification and dehumidification of 10 to 98 % rh and
precise temperature control from -42 °C to +190 °C (without
humidity) with humidity control from +10 °C to +95 °C provide
unlimited flexibility for controlled material and function tests as
well as ageing tests.
C LI MAT E T ES T I NG
MAT ER I AL T ES T S
AG E I N G T E S T
Reliable and efficient climate technology
The components of the climate system interact perfectly for quick, precise and energy-saving
temperature changes. The 3-layer insulation system for the chamber, derived from aerospace
engineering applications, impresses with an excellent K-value and prevents moisture penetration
of the insulation material. The electronically controlled injection of refrigerants guarantees an
optimal cooling performance and thanks to the automatic defrosting system, the TTC and CTC
test chambers run in continuous operation without interruption.
The stainless steel evaporator stands out with a long and corrosion-free life and the twin-compressor, regulated according to the output, saves valuable energy. The temperature-dependent
speed-controlled condenser fan ensures low noise level in partial load operation.
Economical at high performance
The high level of standardisation and the highly efficient principle of equal parts in production at
Memmert allow an extensive range of standard features, along with constantly excellent quality
at an outstanding cost/benefit ratio. Thus, the environmental test chambers CTC and TTC cool
down from +180 °C to -40 °C (98 % of setpoint) in only 95 minutes, for example, and heat back
up again from -40 °C to +180 °C (98 % of setpoint) in only 20 minutes. However, this highperformance duo proves to be extreme­ly cost-efficient not only in their procurement costs, but
also in their operating costs.
Cooling down speed
Heating up speed
-40 °C to +180 °C in 20 minutes to 98 % of setpoint
+180 °C to -40 °C in 95 minutes to 98 % of setpoint
Temp. °C
Temp.°C 0 %
180
100 %
180 175,6
98 %
150
150
100
100
50
50
0
0
-40
0%
av
e ra
ge
tem
(IE per
C 6 atu
0 0 re
68 ch
-3- an
5) ge
s
10
20
30
ed
90 %
-40
98 %
-35,6
100 %
95 min cooling down time
20 min heating up time
0
pe
40
0
50
Minutes
10
20
30
40
50
60
70
80
Temperature-humidity working range CTC
relative humidity (%)
100
90
80
70
60
50
40
30
20
10
0
0
10
20
30
40
50
60
70
80
90 Temperature (°C)
90
100
Minutes
17
18
T E C H N I C AL DATA
OV ERV IEW
CLIMAT IC T E S T CH A MBERS CT C – T E MP ER AT UR E T ES T C HAMB ER S T T C
CLIMATIC TEST CHAMBERS CTC – TEMPERATURE TEST CHAMBERS TTC
according to DIN 12880:2007-05, EN 61010-1 (IEC 61010-1), 61010-2-010
D
122
A
supply
cable
Standard equipment
Interior:
Stainless steel, material 1.4301 (ASTM 304)
Internals:
C
1 stainless steel grid
80
Housing:Textured stainless steel, rear zinc-plated steel,
aesthetic functional glass-stainless steel operating
panel with multifunction display and input module
Stainless steel, fully insulated, heated
Connection:
Mains cable with plug
Installation:
On lockable castors
USB
printer interface
B
working chamber
E
Door:
Interfaces:
F
parallel
interface / USB
Optional
Ethernet
LAN
Model sizes/Description
Stainless steel
interior
CTC256
Volume
approx. l
256
Width(A)
mm
640
Height(B)
mm
670
Depth(C)
mm
597
number
6
(D)
mm
898
Height(E)
mm
1730
Depth (without door handle), depth of door handle 50 mm
mm
1100
Support ribs for stainless steel grids
Textured stainless
steel exterior
Temperature
Humidity
Width (plus 20 mm for silicone plug and 5 mm for interfaces))
Jul-2014
(F)
Fully insulated heated stainless steel door
k
Lockable castors for ease of transport
k
Entry port, right, 80 mm with plug
k
Electronic microprocessor temperature controller with Pt100 and auto-diagnostic system
Temperature sensors Pt100 Class A in 4-wire circuit for uninterrupted
operation on failure of one Pt100 with warning indication
Temperature range with humidity control
k
°C
Temperature range without humidity control
°C
-42 to +190
Setting accuracy
°C
-42 to 99.9: 0.1 / 100 to 190: 0.5
double
+10 to +95
–
Average heating up speed (acc. to IEC 60068-3-5) -40 to +180 °C
10 K / minute
Average cooling down speed (acc. to IEC 60068-3-5) +190 °C to 0 °C
5 K / minute
Average cooling down speed (acc. to IEC 60068-3-5) +180 to -40 °C
3 K / minute
Heating up time from -40 °C up to +180 °C (98 % of setpoint)
20 minutes
Cooling down time from +180 °C to -40 °C (98 % of setpoint)
95 minutes
Temperature variation in time acc. to DIN 12880:2007-05 (setpoint dependent)
K
± 0.2 … 0.5
Temperature uniformity in chamber (setpoint dependent)
K
± 0.5 … 2
Capacitive humidity sensor
Active microprocessor control for humidifying and dehumidifying (10 – 98 % rh) incl. digital
indication and auto-diagnostic system ensures rapid reaching of set humidity and very
short recovery times; humidity supply with distilled water by self-priming pump
Telescopic slide for each 2 x 10 l tanks for distilled water
as well as 2 x 10 l tanks as condensate collector
Automatic water tank change-over with alarm for continuous operation
Monitor
TTC256
k
–
k
–
k
–
k
–
Microprocessor temperature monitor acting as over- and undertemperature protection
(protection class 3.3), with Pt100 incorporating fault diagnostics with visual and
acoustic alarm
k
Temperature monitoring band automatically linked to the setpoint (ASF)
k
Monitor relay for reliable heating cut-off in case of fault
k
Mechanical temperature limiter (TB)
k
T EC HNI C AL DATA
OV ERV I EW
C LI MAT I C T ES T C HAMB ER S C T C – T EMPER AT UR E T ES T CH A M B E R S T T C
Model sizes/Description
Acoustic and
optical alarm
CTC256
TTC256
Over- and undertemperature
k
Door-open
k
Underhumidity
k
–
Empty water tank
k
–
Real-time/weekly programmer with group function (e.g. Monday – Friday)
k
Timer with residual running time: max. 40 ramps (each 1 min. up to 999 h) programmable
through controller or MEMoryCard XL; programming via PC and free-of-charge software:
unlimited number of ramps
k
Air Circulation
High-performance air fan, speed adjustable in 10 % steps with
monitoring function of fan speed and automatic speed adjustment
k
Documentation
Internal log memory 1024 kB as ring memory for all setpoints, actual values, errors, settings with
real-time and date; capacity approx. 3 months (CTC) resp. 6 months (TTC) at 1 min. intervals
Parallel printer interface for printing logging files, suitable for all PCL3-compatible
ink jet printers (USB available via converter, see accessories)
k
“Celsius“ software for control and documentation of temperature and relative humidity
k
Calibration (no separate PC required), temperature: 3-point calibration on controller
k
Timer functions
Setup
k
k
Calibration (no separate PC required), humidity: 2-point calibration at 20 % and 90 %
–
Setting of language for dialogue and display DE / EN / ES / FR / IT
k
High-performance twin compressor (refrigerant R404A) with adjustable
speed condenser fan and electronically controlled refrigerant injection
k
Large-area stainless steel evaporator
k
Lighting
Halogen interior lighting 2 x 25 W
k
Further data
Electrical load at 400 V/50 Hz
Refrigeration
Standard accessories
Stainless steel grid
approx. W
7000
number
1
k
Works calibration certificate (measuring point chamber centre at -20 °C and +160 °C)
k
Works calibration certificate (measuring point chamber centre at +30 °C and 60 % rh)
Packing data
Net weight
–
approx. kg
337
Gross weight
approx. kg
463
Width
approx. cm
102
Height
approx. cm
191
Depth
approx. cm
131
Order No. Climatic Test Chambers
Order No. Temperature Test Chambers
Options
CTC256
–
–
TTC256
CTC256
TTC256
Works calibration certificate for one temperature and humidity according to customer specification
D00110
Door hinged on the left
B8
Full-sight glass door (5-layer insulating glazing), heated
B0
Entry port, left, 80 mm, with stopper
F0
Start-up of CTC and TTC chambers and brief training (D, A, CH only) through Memmert service
K9
Accessories
CTC256
TTC256
Additional stainless steel grid
E20591
External control and logging package consisting of mini-Notebook and software “Celsius“,
pre-configurated, and lateral swinging arm
B04410
Further options/accessories see pages 20 - 22
19
Jun-2015
20
PR O DU C T IN F O RMATI O N ABO UT A LL A PPLIA NCE S
DECISION-MAKING-AID
Relying on perfectly controlled processes
Temperature/humidity combinations of Memmert climate chamber*
100% AtmoSAFE: Made by Memmert. As decision-making-aid for the right climate
Active humidification and dehumidification are essential to exactly ­
reach the desired set temperatures and set humidity values, also in
areas with high ambient temperature and extremely high or low air
humidity.
chamber, this graph shows all temperature/humidity combinations of the Memmert
climate chambers.
100
90
Furthermore, to guarantee long term homogeneity,
interaction between humidity and temperature control has been
perfectly adjusted in all Memmert climate chambers.
80
relative humidity (%)
70
60
50
40
30
20
10
0
10
20
30
40
50
60
70
80
90
100
*Note: Within the respective temperature-humidity range, condensation-free ­permanent operation is possible. To which extent condensation may occur in the threshold range depends on the humidity content
of the chamber load and the ambient conditions.
Temperature (°C)
H
PP constant climate chamber
The higher the humidity content of the chamber load, the more water
evaporates inside the chamber. This may influence the maintenance
of the constant humidity considerably. If you need constant stable operation at the edges or the chamber load is very humid, we
recommend dehumidifying with compressed air. We also have other
technical solutions for special needs that guarantee stable operation.
Send us your inquiry!
ICH climate chamber
(page 4 to 7)
(page 12 to 15)
H
CP humidity chamber
CTC environmental test chamber
(page 8 to 11)
(page 16 to 19)
Temperature and humidity test points defined in the guideline ICH
SPECIAL EQUIPMENT FOR MODELS U, UF TS, UNpa, S, I, ICP, IPP, IPS, HPP, ICH
Options for models U, UF TS, UNpa, S, I, ICP, IPP, IPS, HPP, ICH
30
55
75
110
Door with lock (safety lock); for models UF TS per side;
standard on SN/SF and SNplus/SFplus 450 and 750
Door hinged on the left; for models UF TS per side
Potential-free contact (24 V/2 A) with socket to NAMUR NE 28
for external monitoring (indicates when setpoint is reached)
Potential-free contact for combination error message
(e.g. supply failure, sensor fault, fuse)
Potential-free contact (24 V/2 A) with socket to NAMUR NE 28, for signal g­ eneration,
controlled by programme segment, for free-selectable functions to be activated
(e.g. activation of audible and visual signals, exhaust m
­ otors, fans, stirrers, etc.).
Only for units with TwinDISPLAY; max. 2 contacts on 1-phase appliances;
max. 4 contacts on 3-phase appliances
2 contacts
4 contacts
Process-dependent door lock
(only for units with TwinDISPLAY); for models UF TS see page 11 of oven brochure
Door-open-recognition (only for units with TwinDISPLAY); for models UF TS per side;
standard on models ICH L and ICH C
Flexible Pt100 for positioning in chamber or in load with socket, 4-pin,
according to NAMUR NE 28, for external temperature recording (load temperature)
max. 3 sensors
Flexible Pt100 temperature sensor, positioned flexibly in chamber or load,
for local temperature measurement (up to 3 additional sensors are possible).
The measured temperature can, if required, be indicated on the display, recorded
in the integral data store, and can be documented via the AtmoCONTROL software
MobileALERT, notification by SMS in case of any error or alarm of the device.
Requires option H6 “floating contact for alarm”
Temperature restriction (for UN/UF/UNplus/UFplus and models UF TS)
Temperatures: +60, +70, +80, +95, +100, +120, +160, +180, +200, +220
or +250 °C (Please, indicate upon ordering)
Jan-2016
160
260
450
750
1060
B6
B8
–
H5
H6
H72
H74
D4
V5
H4
H8
C3
A8
PR ODUC T I NF OR MAT I ON AB OUT AL L A P P L I A N C E S
21
SPECIAL EQUIPMENT FOR MODELS U, UF TS, UNpa, S, I, ICP, IPP, IPS, HPP, ICH
Accessories for models U, UF TS, UNpa, S, I, ICP, IPP, IPS, HPP, ICH
30
55
75
110
160
USB-Ethernet adapter
E06192
Ethernet connection cable 5 m for computer interface
E06189
USB User-ID stick (with User-ID licence): Oven-linked authorisation licence
(User-ID-programme) on Memory-stick, prevents undesired manipulation by
unauthorised third parties. When reordering please specify serial number.
(Only for units with TwinDISPLAY)
USB stick with documentation software AtmoCONTROL and operation manual
for products with SingleDISPLAY (the standard equipment of appliances with
TwinDISPLAY includes one USB stick with AtmoCONTROL)
Software conforming to FDA AtmoCONTROL. Meets the requirements
for the use of electronically stored data sets and electronic signatures
as laid down in Regulation 21 CFR Part 11 of the US Food and
Drug Administration (FDA). Base licence for the control of one unit
(only for units with TwinDISPLAY)
Integration of additional units (up to max. 15 units) into an already existent
FDA-software licence (only for units with TwinDISPLAY)
IQ document with works test data for chamber, OQ/PQ check list
as support for validation by customer
IQ/OQ document with works test data for chamber, incl. temperature distribution
survey for one free-selectable temperature value. 9 measuring points (size 30),
27 measuring points (sizes 55 – 1060) to DIN 12880:2007-05 (further temperature
values on demand), PQ check list as support for validation by customer
IQ/OQ document with works test data for chamber, incl. temperature distribution
survey for one free-selectable temperature and humidity value. 27 measuring
points to DIN 12880:2007-05, PQ check list as support for validation by customer
(models HPP and ICH)
IQ/OQ document with works test data for chamber, incl. temperature distribution
survey for one free-selectable temperature, humidity and light value. 27 measuring
points to DIN 12880:2007-05, PQ check list as support for validation by customer
(models HPP with light and ICH L)
External measuring instrument with sensors for daylight and UV-light.
Product information on demand (models HPP, ICH L, IPPplus)
Ditto with additional measuring head for temperature and humidity measurement.
Product information on demand (models HPP, ICH L, IPPplus)
750
1060
B33172
B29768
Stacking set (4 pcs) for stacking of appliances of same size
Castor frame (2-part), height 140 mm (not for models UF TS)
450
B33170
Set of height adjustable feet (4 pcs)
Plug-in tube extension (outer diam. 60,3 mm, inner 57 mm), straight, for exhaust air
ducting (if necessary for connection by hose), only models U, I, S, not for models UF TS
Plug-in tube extension (outer diam. 60,3 mm, inner 57 mm), angled, for exhaust
air ducting (if necessary for connection by hose), only models U, I, S, not for models UF TS
Flush-fit unit (stainless steel frame covering gap between oven and wall opening),
with air slots – technical clarification required
Flush-fit unit (stainless steel frame covering gap between oven and wall opening),
without air slots – technical clarification required; for models UF TS see page 11 of
oven brochure
Subframe, adjustable in height (not for models UF TS)
(size 30 to 75: height 600 mm, size 110 to 450: height 500 mm)
Subframe, on castors (not for models UF TS)
(size 30 to 75: height 660 mm, size 110 to 160: height 560 mm)
Subframe, adjustable in height (not for models UF TS)
(height 130 mm, for example for units with fresh air filter)
260
–
B29744
–
B29718
B29719
B29728 B29730 B29732 B29734 B29736 B29738 B29740
B29742
B29729 B29731 B29733 B29735 B29737 B29739 B29741
B29743
B29745
B29747
B29749
B29751 B29753
–
B29746
B29748
B29750
B33657
B33659
B33661
B33664
–
B33173
B33174
B33175
B33176
–
–
FDAQ1
FDAQ2
D00124
D00125
D00127
–
D00136
–
D00136
–
D00136
–
–
D00137
–
D00137
–
D00137
–
B04713
–
B04714
–
Jan-2016
22
PR O DU C T IN F O RMATI O N ABO UT A LL A PPLIA NCE S
SPECIAL EQUIPMENT FOR MODELS FOR MODELS VO, VOcool, INCOmed, HCP, TTC, CTC
Options for models VO, VOcool, INCOmed, HCP, TTC, CTC
Sizes: 200 / 400 / 500 108 / 153 / 246 256
Interface Ethernet instead of USB including software
W4
RS232 interface instead of USB
W6
Computer interface RS485 (for networking a max. of 16 ovens) instead of RS232
V2
Door with lock (safety lock – standard on sterilisers of size 700 and 800 –
not available for VO, VOcool, TTC/CTC)
Flexible Pt100 for positioning in chamber or in load with socket, 4-pin,
according to NAMUR NE 28, for external temperature recording (load temperature);
for VO and VOcool on demand
Additional Pt100 temperature sensor, positioned flexibly in chamber or load, for local
temperature measurement (up to 3 additional sensors are possible). The measured temperature can, if required, be indicated on the multifunction display, recorded in the integral
ring store, and can be documented via the “Celsius” software or on an attached printer.
(Not available for VO, VOcool, TTC and CTC)
Potential-free contact (24 V/2 A) with socket, according to NAMUR NE 28
for external monitoring (indicates when setpoint is reached)
Ditto, according to NAMUR NE 28 for combination error message
(e.g. supply failure, sensor fault, fuse)
Ditto, triple, for signal generation, controlled by programme segment for a total of 3
freely selected functions to be activated (e.g. acoustic and visual signals, exhaust motors,
fans, stirrers etc.)
MobileALERT, notification by SMS in case of any error or alarm of the device.
Requires option H6 “floating contact for alarm”
Accessories for models VO, VOcool, INCOmed, HCP, TTC, CTC
USB connection cable for computer interface
Parallel/USB converter cable with integrated power supply unit to connect
HP printers with USB interface to MEMMERT units
Documentation package consisting of parallel USB converter cable including
PCL3-compatible HP colour inkjet printer with USB interface
(HP OfficeJet 6000 or successor) for direct connection of printer to Memmert unit
Temperature profile write/read unit for programming via PC,
for writing to and reading from the chip card, up to 40 ramps
Additional chip card, blank, formatted (32 kB MEMoryCard XL for a maximum
of 40 ramps). Not available for INCOmed models
Oven-linked authorisation card (User-ID-Card) prevents undesired manipulation
by unauthorised third parties. When reordering please specify serial number
Software conforming to FDA ”Celsius FDA Edition“. Meets the requirements for
the use of electronically stored data sets and electronic signatures as laid down
in Regulation 21 CFR Part 11 of the US Food and Drug Administration (FDA).
Base licence for the control of one unit
Integration per additional unit (up to max.15 units)
into an already existent FDA-software licence (E05019)
IQ check list with works test data for chamber as support for validation by customer
OQ check list with works test data for one free-selectable temperature
value incl. temperature distribution survey for 27 measuring points to
DIN 12880:2007-05 as support for validation by customer
OQ check list with works test data for one free-selectable temperature value
incl. temperature distribution survey for 5 measuring points to DIN 12880:2007-05
as support for validation by customer valid for one thermoshelf;
ditto for further thermoshelves VO upon request (VO and VOcool only)
OQ check list with works test data for one free-selectable humidity and
temperature value incl. temperature distribution survey for 27 measuring points
to DIN 12880:2007-05 as support for validation by customer (models HCP and CTC)
OQ check list with works test data for one free-selectable CO2, humidity and
temperature value incl. temperature distribution survey for 27 measuring points
to DIN 12880:2007-05 as support for validation by customer (models INCOmed)
External measuring instrument with sensors for daylight and UV-light, with additional
measuring head for temperature and humidity.
Product information on demand (models INCOmed and HCP)
Jan-2016
B6
H4
H8
H5
H6
H7
C3
Sizes: 200 / 400 / 500 108 / 153 / 246 256
E03643
E05300
B04432
E05284
E04004
E04159
E05019
FDAQ4
D00103
D00104
D00117
D00104
D00104
B04714
PR ODUC T I NF OR MAT I ON AB OUT AL L A P P L I A N C E S
MODEL VARIANTS
SingleDISPLAY
ControlCOCKPIT with one TFT display
TwinDISPLAY
ControlCOCKPIT with two TFT displays
AVAILABLE APPLIANCES
AVAILABLE APPLIANCES
UN / UF / IN / IF / SN / SF / IPP / IPS
UNplus / UFplus / UF TS / UNpa / INplus / IFplus / SNplus / SFplus
IPPplus / ICP / HPP / ICH
One high-resolution TFT colour display with touch-sensitive
buttons for selection of functions
Two high-resolution TFT colour displays with touch-sensitive
buttons for selection of functions
Available parameters on the ControlCOCKPIT: Temperature
(Celsius or Fahrenheit), fan speed, exhaust air flap position,
programme time
Available parameters on the ControlCOCKPIT: Temperature
(Celsius or Fahrenheit), fan speed, exhaust air flap position,
programme time, relative humidity, illumination, CO2
One temperature sensor Pt100 DIN class A in a 4-wire circuit
Two Pt100 sensors DIN class A in a 4-wire circuit for mutual
monitoring, taking over functions in case of an error
HeatBALANCE function for application specific adjustment of heat
output distribution (balance) between the upper and lower heating
groups in an adjustment range between -50 % and +50 %
(not valid for models 30, HPP110, IPP110plus, ICP, ICH)
AtmoCONTROL software for reading out, managing and organising
the data logger via Ethernet interface (temporary trial version can be
downloaded). USB stick with AtmoCONTROL software available as
accessory (on demand)
AtmoCONTROL software on a USB stick for programming, managing
and transferring programmes via Ethernet interface or USB port
ControlCOCKPIT with USB port for uploading programmes,
reading out protocol logs, activating the User-ID function
Displaying of already logged protocol data on the ControlCOCKPIT
(max 10,000 values correspond to approx. 1 week)
Ethernet interface on the rear of the appliance for reading
out the protocol log and for online logging
Ethernet interface on the rear of the appliance for reading out the
protocol log and for uploading programmes and for online
logging
Double overtemperature protection: Electronic temperature
monitoring with freely adjustable monitoring temperature,
for models U, I, S with option A6 TWW/TWB
(protection class 3.1 or 2), mechanical temperature
limiter TB acc. to DIN 12880
Multiple overtemperature protection: Electronic temperature monitoring
TWW/TWB (protection class 3.1 or 2 resp. 3.3 for units with active
cooling) and mechanical temperature limiter TB (protection class 1)
acc. to DIN 12880, AutoSAFETY automatically adjusts to the set
value within a freely adjustable tolerance range. Setting individual
MIN / MAX values for over/undertemperature alarm and also for all
other parameters such as relative humidity, CO2
PID microprocessor control with integrated auto-diagnostic system
Structured stainless steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel
High-temperature connectors on the rear of the appliance for single-phase power connection according to country specific systems and IEC standards
Internal data logger with a storage capacity of at least 10 years
German, English, French, Spanish language settings available on the ControlCOCKPIT
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
The SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at
all measuring points – optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamber.
Adjustment of three calibration values for temperature and additional appliance
specific parameters directly at the ControlCOCKPIT
23
HEATING AND DRYING OVENS UNI
UNIVERSAL OVEN U
PASS-THROUGH OVEN UF TS
PARAFFIN OVEN UNpa
STERILISER S
VACUUM OVEN VO
COOLED VACUUM OVEN VOcool
INCUBATORS
INCUBATOR I
CO2 INCUBATOR INCOmed
COMPRESSOR-COOLED INCUBATOR ICP
COOLED STORAGE INCUBATOR IPS
CLIMATE CHAMBERS
CONSTANT CLIMATE CHAMBER HPP
HUMIDITY CHAMBER HCP
CLIMATE CHAMBER ICH
ENVIRONMENTAL TEST CHAMBER CTC/TTC
WATERBATHS / OILBATHS
WATERBATH W
OILBATH O
YOUR MEMMERT PARTNER
Memmert GmbH + Co. KG
P.O. Box 1720 | D-91107 Schwabach
Tel. +49 9122 925-0 | Fax +49 9122 14585
E-Mail: sales@memmert.com
facebook.com/memmert.family
The platform for experts: www.atmosafe.net
Order No. D13643 · Printed in Germany · Climate 1601 e 2.0 © by Memmert GmbH + Co. KG www.ad-room.de
Some of the illustrations in this publication include special accessories. We reserve the right of technical modifications. Dimensions are subject to confirmation.
PELTIER-COOLED INCUBATOR IPP
Download PDF

advertising