Electronic Proximity™ Sensing
Technology Lavatory Faucets
SPECIFICATION: (example)
•Deck mount electronic lavatory faucet
• Cast chrome plated brass spout
•Proximity™ Sensing Technology
•Hardwire 24 VAC to 6 VDC
(Transformer required. Specify separately)
• Battery 4 ‘C’ cell
•Surface mount control box
•Mixing valve required (Order separately)
ELECTRONIC DECK mount LAVATORY FAUCET
GRAIL®
FRONT VIEW
1.5 USGPM (5.7 L/min)
o 610T040 Grail®, hardwire
o 611T040 Grail®, battery operated
o 610T040-BB Grail®, hardwire with battery backup
See DSP-BB for detailed specification
(found in the “Add-On Option” section when
using the printed spec binder)
o6
11T040-HP Grail®, HydroPower™
See DSP-HP for detailed specification
(found in the “Add-On Option” section when
using the printed spec binder)
SIDE VIEW
44.5 mm
(1.75")
38mm
(1.5")
Max Deck
Thickness
32 mm (1.25")
Dia. Hole Required
0.5 USGPM (1.9 L/min)
o 610T050 Grail®, hardwire
o 611T050 Grail®, battery operated
o 610T050-BB Grail®, hardwire with battery backup
See DSP-BB for detailed specification
(found in the “Add-On Option” section when
using the printed spec binder)
124 mm
(4.9")
77 mm
(3.0")
102 mm
(4")
Sensing Wire
711 mm (28")
OPERATION:
• Hands free (touchless) operation.
• No visible sensor, the spout is the sensor.
• Water flows when sensor is activated.
• Water flow stops upon de-activiation of sensor.
•Auto shut-off feature. Factory set to
45 seconds. Will reset and recalibrate once
obstruction is removed.
• Adjustable sensing distance 0 to 89mm
(0 to 3.5") factory set to 89mm (3.5") ± 1/8".
• Low battery audible beep (for battery models
only) will activate after faucet shuts off when
approximately 1500 cycles remain.
NOTE: For optimum performance of this product, we recommend a
system pressure between 20 and 80 PSI static. This product will
operate up to a maximum of 125 PSI static per ANSI and CSA
requirements. However, we do not recommend pressures above
80 PSI. Thermal expansion or leaking pressure reducing valves may
require use of expansion tanks or relief valves to ensure your
system never exceeds its maximum intended pressure setting.
To Control Box
152 mm
(6.0")
3/8"
Compression
62 mm
(2.5")
VANDAL PROOF SURFACE MOUNT HOUSING
FLOW RATE vs PRESSURE
FLOW
(l/min.)
Outlet Flow Rates
FLOW
(USGPM)
2.5
9
8
2
7
6
1.5
5
6_ _ T040
4
3
1
6_ _ T050
2
1
0
0
10
20
30
40
50
60
.5
70
062022A GRAIL® DECORATIVE COVERPLATE 102 mm (4.0")
Reduces Max. Deck Thickness to 28 mm (1 1/8")
80
Battery Operated box shown.
Hardwire Version comes complete with
Watertight Connector and Hardwire Converter
24VAC to 6VDC.
Hardwire with Battery Backup (-BB) comes
complete with Watertight Connector, Hardwire
Converter 24VAC to 6VDC and 9V battery.
See DSP-BB for detailed specification
(found in the “Add-On Option” section when
using the printed spec binder).
139 mm
(5.47")
36 mm
(1.43")
0
3/8"
Compression
Connection
Outlet
Line Pressure (psig)
Approvals:
• CSA certified
• Complies to ASME A112.18.1
• ADA Compliant and meets Handicapped
Accessibility Standard ASME A117.1
of less than 5 lbs. handle operating force.
• IAPMO listed
(Contact Delta Representative for State and/or
Local Approvals.)
Note: Measurements may vary ± 6mm (0.25")
Batteries included on all battery models.
Refer to www.specselect.com for individual models.
Page 4.C.14
DSP–610T
Rev.
C DSP–610T Rev. C
146 mm
(5.73")
89 mm
(3.5")
MAX.
Recommended
381 mm
(15" max.) to
top of counter
101 mm
(3.96")
1/8" Allen Screw
Battery Pack
Inlet 3/8" NPT or
3/8" Compression
Adaptor (Supplied)
Flow Rates are at 60 PSI.
Note: Use this page as a product submittal sheet.
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.