Treadmills
Stress Testing Treadmills
TRACKMASTER TMX428
TRACKMASTER TMX428CP
This heavy-duty, medical
treadmill is specifically
designed to be interfaced
and controlled by a wide
variety of Cardiac and
Pulmonary Stress Testing Systems, including
the Ultima Series® cardiorespiratory diagnostic
systems.
For applications requiring
occasional independent control
of the treadmill (not using
the stress testing computer),
the TMX428CP is the ideal
choice with an easy to use,
programmable controller that can be operated in
manual mode.
FEATURES
FEATURES
quiet, zero-start, 4 HP (6 HP peak)
˚˚Smooth,
hi-torque drive.
all the features from the TMX 428
˚˚Includes
with an optional programmable controller
quiet linear actuator elevation system.
˚˚Smooth,
Low-to-the-floor, cushioned deck for patient
˚˚comfort and safety.
bright display shows speed, pace,
˚˚Large,
elapsed time, elevation, distance, calories,
˚˚
˚˚
˚˚
˚˚
˚˚
22” x 63” (56 cm x160 cm) running belt and
safety handrails.
Patented MasterTrack® belt alignment system
eliminates off-center running belts.
Prominent emergency stop button and patient
safety tether
Minimum maintenance.
www.mgcdiagnostics.com
˚˚
˚˚
˚˚
˚˚
METS, heart rate and target heart rate.
Message center displays customized
information.
2 built-in accessory holders.
Dual stop switches and safety tether
Quick start, speed, elevation commands
Cool down command
SPECIFICATIONS
TMX428
User weight capacity 500 lb/227 kg
Safe, Low-profile deck 7” (18 cm) from floor)
22” x 63” (56 x 160 cm) running surface
Self-aligning running belt
Cushioned and reversible running deck
All steel chassis
Powder Coat finish
Emergency stop and patient tether
Space Requirements 33”x 78.5” (84 x 199 cm)
[ Drive System ]
Heavy-duty, 4 HP (6 HP peak) drive
208-240V, 50/60 Hz, dedicated 15A service
110V, 50/60 Hz, dedicated 15A service
[ Speed Range ]
Zero start, .1-12 mph (.16-19 kph)
Zero start, .1-15 mph (.16-24 kph)
Self-calibrating
[ Elevation Range ]
0-25%
Self-calibrating
110V, 50/60 Hz, dedicated 15A service
[ Other Options ]
Emergency stop
Adjustable front handrail
TMX428CP
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
button left or right side
buttons on controller
l
l
Specifications subject to change without notice from the manufacturer
MANUFACTURED BY:
MANUFACTURER’S WARRANTY:
Domestic - 2 years parts, 1 year labor
International - 3 years parts
TrackMaster® Treadmills meet all worldwide regulatory
requirements and are listed by Intertek.
MGC DIAGNOSTICS CORPORATION, manufactured by Trackmaster distributed by Medical Graphics Corporation
350 Oak Grove Parkway St. Paul, Minnesota USA 55127-8599
© 2016 MGC Diagnostics Corporation or one of its affiliates. All rights reserved.
All specifications subject to change without notice. Products may vary from those illustrated.
MGC Diagnostics and its affiliates are equal opportunity/affirmative action employers committed to cultural diversity in the workforce.
Part# 060147-001 Rev A