7” Digital Photo Frame
Instruction manual
-------------------------------------------------------------------------L7DPF17
-------------------------------------------------------------------------12 month manufacturer's warranty
Contents
Safety precautions........................................................................ 2
Package contents.......................................................................... 3
Guide to the device....................................................................... 4
Preparations..................................................................................... 5
Main menu......................................................................................... 7
Photo play......................................................................................... 7
File manager.................................................................................... 8
Calendar............................................................................................. 9
Setup.................................................................................................... 9
Troubleshooting............................................................................. 11
Specifications.................................................................................. 12
1
Safety precautions
Congratulations for purchasing your new digital photo frame. With this Digital Photo Frame,
you can easily and quickly view photos directly from your digital camera’s memory card.
You can even create a slide show with multiple transition effects. The Digital Photo Frame is
compatible with the following memory cards and device: SD, MMC and USB device.
Warning
• High voltage inside. Do not open the casing of the digital photo frame. Refer servicing to
qualified personnel only.
• To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
• To avoid permanent loss of data, do not insert or remove memory cards or USB device
when the power is on.
Safety instruction
• The product shall not be exposed to dripping or splashing liquids and no objects filled with
liquids, such as vases, shall be placed on the product. Dry location use only.
• No naked flames sources, such as candles, should be placed on or near the product.
• Keep the digital photo frame clean and never store it next to a heat source or in dirty, humid
or wet places. Keep it out of direct sunlight.
• Press the buttons gently. Pressing them or the screen too hard can damage the digital photo
frame.
• Do not use the product in an extremely dry environment as this can lead to static discharge,
which can damage the digital photo frame.
• Do not subject the product to harsh impacts. Do not drop the appliance. These may result in
damage to the product and loss of data.
• Do not attempt to repair or disassemble the unit by yourself. Only qualified service personnel
should perform repairs.
• The digital photo frame is for indoor use only.
• Only use the DC 5V power adaptor supplied with this product. Do not unplug the adaptor
when viewing the pictures.
• Do not block the ventilation holes on the back of the digital photo frame.
• Children should be supervised to ensure that they do not play with the appliance.
• Please unplug the product when you do not intend to use it for a long period of time to
prevent overheating and damage to the screen.
• Please insert the plug into the DC IN jack completely on the unit before connecting the AC
adaptor to mains supply.
• This product can only play files with compatible format.
• Do not use the product in extreme temperature, the best operating temperature is 5°C-35°C.
• Do not allow metallic objects to touch the DC plug when the player is on.
2
Cleaning and care
• Always turn off the unit and remove the power adaptor from the mains outlet before cleaning
the unit.
• Use a soft dry cloth to clean this product.
• Never spray or pour liquids directly onto the screen or casing.
• Do not use abrasive materials or chemical cleaners such as alcohol, benzene, etc. Do not allow
any water or other liquid to enter the appliance.
• Do not drop the unit, which is a complicated electronic device and cannot withstand shock
from falls.
• Do not hit or scratch the screen. Handle it with care. The LCD panel of the digital photo frame
is made of glass and therefore is sensitive to excessive force or contact with sharp edges.
Package contents
Please make sure the following items are included in the package. If an item is damaged or
missing, please contact your dealer.
Main Unit
Stand
User Manual
AC Adaptor
Items not shown:
Statutory notice
Warranty card
3
Guide to the device
Digital Photo Frame view
1 2
3
4
5
6
9
10
7
8
11
Keys definitions
1. Right key: Press it to navigate RIGHT when selecting options.
2. Power key: Press it to power on the unit or power off the unit.
3. Up key: Press it to navigate UP when selecting options.
4. Play/Pause key: Press it to confirm option. In slideshow mode, press it to pause or play
slideshow.
5. Left key: Press it to navigate LEFT when selecting options.
6. Down key: Press it to navigate DOWN when selecting options.
7. Menu key: Press it to return to the upper menu.
8. Stand hole to hold the digital photo frame.
9. Card reader slot for connecting SD/MMC cards.
10. USB port for connecting most of the USB device directly once all photos are loaded into
the USB device.
1 1. DC 5V IN jack for connecting the supplied AC adaptor to power the digital photo frame.
Note: Due to production improvements, the appliance may differ slightly from the
diagram shown. Diagrams in this instruction manual are for reference only.
4
Preparations
Getting started:
Step 1: Install the stand at the rear of the digital photo frame.
Step 2: Insert memory devices into the correct slot.
Step 3: Insert the DC plug of adaptor to the unit and plug the power adaptor into an available
AC 100-240V wall outlet to power on the unit.
Installing the stand
Install the stand to the stand hole; place it on a stable and flat surface so that it stands up.
Connecting the power supply
1. Place the digital photo frame on a stable and flat surface.
2. Insert the DC plug of the adaptor into the DC 5V IN on
the side of the digital photo frame, and then connect
power adaptor to an available AC 100V-240V 50/60Hz
mains outlet, the unit will then automatically power on.
3. Press the [
] button to power ON/OFF.
4. When the unit is not being used for a long time, press
the [
] button to power it off again and unplug the AC
adaptor from mains outlet.
Connecting a USB device
You can view the pictures from the USB memory device by
connecting it to the digital photo frame.
Note: Not all USB storage devices can be read in this digital
photo frame.
Inserting memory cards
To view the pictures from a compatible memory card, insert
it into the respective card slot in the Digital Photo Frame.
This Digital Photo Frame is compatible with the following
memory cards: • SD • MMC
Insert a SD or MMC card into the 2- in -1 card slot correctly
according to the indication on the unit.
5
Notes:
1. This unit can play only pictures in USB device or memory card.
2. If your USB device or memory card is loaded with images but do not display, the format of your
USB device or memory card might not be compatible with the unit.
3. Do not force the memory card into the slot. If you are not able to insert the memory card easily
and completely, you may have inserted it incorrectly.
4. To remove the card, pull out the card slowly. Please DO NOT remove the memory card just after
inserting it into the unit or when the unit is processing the files. Wait until the screen is stable.
5. SD Card maximum support is 32GB (FAT32 format), USB maximum support is 8GB(FAT32
format).
6. This unit may not be compatible with all USB devices and memory cards, this is not an indication
of a problem with the unit.
Selecting the memory device
Plug in memory device and then press the [ ] button to power on the Digital Photo Frame, it will
enter slide show automatically. Press MENU key to exit slideshow mode and enter the thumbnail
mode, press MENU key twice to enter into memory device selecting interface. Press
key to
select the desired device. Press the
key twice to return to the thumbnail gallery.
Note: The Digital Photo Frame may be slow to read some large capacity memory cards
and USB devices. Please wait for the device to be recognized.
1. Press
key to choose an input source : Memory Card or USB device.
2. Press
key to choose Photo mode on main menu.
3. And then press
key to confirm your selection and start to play the photos.
6
Main menu
In the memory device selecting interface, press the
key to enter into main menu; press
key to select Photo/File/Calendar/Setup mode, press
to enter into the selection.
Photo play
Viewing photos
When a SD/MMC card or USB device containing photos is inserted, a photo slideshow will
start automatically.
If you press MENU key, a thumbnail gallery will appear.
Press
key to select the desired picture.
Press
key to display the selected picture.
Press
key for the second time to enter slideshow mode.
Press
key again to pause the slideshow.
Press MENU key to return to Thumbnail, press again to return to main menu.
7
Adjusting photos
When playing a photo, long press MENU key to enter into photo adjusting interface. Press
key to select Save Picture/Rotate/Zoom/Exit. Press
key to confirm selection.
Save Picture: Save the photo into built-in memory if there is an available built-in memory.
Rotate: Rotate the photo.
Zoom: Enlarge the photo.
Exit: Exit the photo adjusting.
File manager
In main menu interface, press the
key to select the File mode, and then press the
key to enter into File mode.
Long press MENU key to Delete File or Exit, then press
key to select option, press
key to confirm selection.
Press
key to select the desired files or pictures.
Press MENU key to exit the interface.
8
Calendar
In main menu interface, press the
key to select the Calendar mode, and then press the
key to enter Calendar interface.
Calendar photo will be displayed automatically after entering Calendar mode.
Press
key to view month display.
Press MENU key to return main menu.
Setup
The Setup interface lets you customise and configure the digital photo frame.
key to select the Setup mode on the main menu, and press
key to enter
1. Press
into Setup interface.
2. Press
key to select the desired setting.
3. Press
to enter setting, select the items with
key, then press
to confirm.
4. Press MENU to exit.
9
Language: Select the system display language.
Slide mode: Select the slide mode between Single window/Four windows/Triple windows.
Slide speed: Select interval time for slideshow.
Photo effect: Select photo effect between Color/Mono/Sepia.
Slide effect: Select the style of photo transition while playing slideshow.
Photo mode: Select photo mode between Auto Fit/Optimal/Full.
Display: Adjust the display Contrast/Brightness/Saturation/Tint.
Set time/date: Setup the Calendar and clock.
Set time format: Select time format to 12-hour or 24-hour.
Format built-in memory: Select No or Yes to format the built-in memory.
Reset Setting: Select to reset all settings to default.
Exit: Select to exit the setup mode.
10
Troubleshooting
Symptom or problem
Possible cause/solution
No power
The power connector is not completely inserted into the unit.
Screen freezes
The unit may have malfunction. Switch it off and wait for a
few minutes before turning it on again.
Characters in display are
incorrect
Make sure that you have selected the correct language.
Unable to insert memory
card or USB device.
Memory card or USB device is not inserted correctly; insert
the card or USB device in the opposite side.
The unit cannot recognize
the memory device
inserted.
1. Memory card or USB device is not inserted correctly.
2. The memory device may be damaged. Please try a new
device.
3. Make sure that you are using a memory card type, which
is supported by the unit.
4. Some unpopular memory cards or USB devices are not
compatible with the product. Use a memory card or USB
device, which matches with the Digital Photo Frame.
5. It is slow to read the mass capacity memory device; you
should wait for a minute.
Note: Not all USB storage devices or Memory cards
can be recognized for this digital photo frame.
There is a memory card or
USB device inserted in the
unit, but the photo frame
is not able to read the card
or USB device.
1. Make sure that you are using a memory card or USB
device type, which is supported by the unit.
2. Make sure that the memory card or USB device is inserted
all the way into the correct slot.
3. The memory card or USB device is damaged.
11
Specifications
Display
Screen size: 7” color TFT LCD
Screen resolution: 800 x 480 pixels
Power adaptor
Input: AC100~240V, 50/60Hz 0.18A
Output: DC 5V 1A
For use only with Audio/Video or similar equipment.
USB port
USB port 2.0 supports most of the USB device
Support memory cards
SD, MMC
Support picture format
JPEG only
Operating temperature
5°C ~ 35°C
NOTE: As a result of continual improvements, the design and specifications of this
product are subject to change without notice and may differ slightly from the unit
illustrated on the packaging.
12
Distributed by:
M.E.W. (Australia) Pty Ltd,
15 Vaughan St, Essendon Fields, Vic 3041
ACN 152 719 036
Customer care: Aus-1300 530 800
customercare@lindenproducts.com.au
lindenproducts.com.au
While every effort has been made in the preparation of this
instruction manual the publishers cannot be held responsible
for the accuracy of the information contained herein or any
consequence arising from it.
E2284