Operating instructions
Refrigerator
Read the operating instructions before switching on for the first time
Page 6
GB
7083 597-00
CMes
Disposal notes
The appliance contains reusable materials and should
be disposed of properly - not simply with unsorted
household refuse. Appliances which are no longer
needed must be disposed of in a professional and
appropriate way, in accordance with the current local
regulations and laws.
When disposing of the appliance, ensure that the refrigerant circuit
is not damaged to prevent uncontrolled escape of the refrigerant
it contains (data on type plate) and oil.
• Disable the appliance.
• Pull out the mains plug.
• Cut through the connection cable.
WARNING
Danger of suffocation due to packing material and plastic film!
Do not allow children to play with packaging material. Take the
packaging material to an official collection point.
Range of appliance use
The appliance is suitable solely for cooling food in a domestic
environment or similar. This includes, for example, use
- in staff kitchenettes, bed and breakfast establishments,
- by guests in cottages, hotels, motels and other forms of accommodation,
- in catering and similar services in the wholesale trade.
Use the appliance solely as is customary within a domestic environment. All other types of use are inadmissible. The appliance
is not suitable for storing and cooling medicines, blood plasma,
laboratory preparations or similar substances and products covered by the 2007/47/EC Medical Devices Directive. Any misuse
of the appliance may result in damage to or spoilage of stored
goods. Furthermore, the appliance is not suitable for operation in
potentially explosive atmospheres.
Description of the appliance
Interior light
Interior light switch
Type plate
Brightness control for interior light
Grid shelves
Temperature control
Connect the mains cable provided
to the appliance.
Lock
Adjustable-height feet
6
Safety instructions and warnings
• To prevent injury or damage to the unit, the appliance should be
unpacked and set up by two people.
• In the event that the appliance is damaged on delivery, contact
the supplier immediately before connecting to the mains.
• To guarantee safe operation, ensure that the appliance is set up
and connected as described in these operating instructions.
• Disconnect the appliance from the mains if any fault occurs. Pull
out the plug, switch off or remove the fuse.
• When disconnecting the appliance, pull on the plug, not on the
cable.
• Any repairs and work on the appliance should only be carried
out by the customer service department, as unauthorised work
could prove highly dangerous for the user. The same applies to
changing the mains power cable.
• Do not allow naked flames or ignition sources to enter the appliance. When transporting and cleaning the appliance, ensure that
the refrigerant circuit is not damaged. In the event of damage,
make sure that there are no ignition sources nearby and keep
the room well ventilated.
• Do not stand on the plinth, drawers or doors or use them to support anything else.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities
or lack of experience and knowledge unless they have been
given initial supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should
be supervised to ensure that they do not play with the appliance.
• Avoid prolonged skin contact with cold surfaces or chilled/frozen
food. This could cause pain, numbness and frostbite. In the case
of prolonged skin contact, protective measures should be taken,
e.g. gloves should be worn.
• Do not consume food which has been stored for too long, as it
could cause food poisoning.
• Do not store explosives or sprays using combustible propellants
such as butane, propane, pentane, etc. in the appliance. Electrical
components might cause leaking gas to ignite. You may identify
such sprays by the printed contents or a flame symbol.
• Do not use electrical appliances inside the appliance.
• If you have a lockable appliance, do not keep the key near the
appliance or within reach of children.
GB
Climate rating
The climate rating indicates the room temperature at which the appliance may be
operated in order to achieve full refrigeration
performance.
The climate rating is indicated on the type
plate.
The position of the type plate is shown in
the description of the appliance.
Climate rating
SN
N
ST
T
SN-ST
SN-T
Room temperature
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
+10°C to +38°C
+10°C to +43°C
Do not operate the appliance outside the specified room
temperature range.
Setting up
• Avoid positioning the appliance in direct sunlight or near cookers,
radiators and similar sources of heat.
• The floor on which the appliance stands should be horizontal and
level. Compensate for uneven floors with the adjustable feet.
• Standard EN 378 specifies that the room in which you install
your appliance must have a volume of 1 m3 per 8 g of R 600a
refrigerant used in the appliance, so as to avoid the formation of
inflammable gas/air mixtures in the room where the appliance
is located in the event of a leak in the refrigerant circuit. The
quantity of refrigerant used in your appliance is indicated on the
type plate on the inside of the appliance.
• There must be a gap of at least 20 cm between the upper edge
of the appliance and the ceiling. Always ensure that there is good
ventilation and that the outward flowing air is able to escape.
Appliance
dimensions
• The appliance is designed for use in enclosed areas. Do not
operate the appliance outdoors or in areas where it is exposed
to splash water or damp conditions.
• Special-purpose lamps (incandescent lamps, LEDs, fluorescent
tubes) in the appliance serve to illuminate the appliance interior
and are not suited for room illumination.
• When transporting or operating the appliance at an altitude of
more than 1500 m above sea level, the glass pane in the door
can break due to the reduction in air pressure. Broken fragments
are sharp-edged and can cause serious injury.
7
Inserting the grid shelves
The knurled screws supplied are used to support the grid shelves.
Screw the knurled screws into the desired position inside the appliance to the left and right and insert the grid shelves.
The lower grid shelf only requires two screws at the front. The rear
part of this grid shelf rests on the ledge of the interior container.
Electrical connection
Only operate the appliance with alternating current (AC).
The permissible voltage and frequency are indicated on the type
plate. The position of the type plate is shown in the description of
the appliance.
The socket must be properly earthed and protected by a fuse.
The tripping current of the fuse must be between 10 A and 16 A.
The socket must not be situated behind the appliance and must
be easily accessible.
Do not connect the appliance using an extension cable or extension socket.
Do not use stand-alone inverters (conversion
of direct current to alternating/three-phase current) or energy-saving plugs. Risk of damage
to the electronic control system!
Switching the appliance on and off
You are recommended to clean the interior of the appliance before
switching it on for the first time (see Cleaning).
Switching the appliance on
Connect the appliance to the mains - the appliance is switched on.
Switching the appliance off
Pull out the mains plug or set the temperature control
to 0.
Wall mounting
The appliance can be wallmounted.
There are two mounting holes
at the top of the back of the
appliance.
Make sure the wall and the
fasteners can withstand the
weight of the appliance when
fully loaded.
Important
When the temperature control is turned to "0", only the refrigeration system is switched off. Before cleaning, always
disconnect the appliance from the mains. Remove the plug.
Setting the temperature
Set the temperature inside the appliance using the temperature
control.
When the control is turned to
"7", the temperature inside the
appliance is at its lowest.
Set the control between "1" and
"7" as required.
8
Interior light
The interior light is fitted on the
inside at the top.
It can be switched on and off by
pressing the switch S.
The lighting may only be
replaced by the customer
service technician or by
competent skilled personnel!
Caution - class 1M laser radiation. When cover is removed,
do not look directly at light
through optical instruments.
Cleaning
GB
Before cleaning always switch off the appliance. Disconnect
from the mains or switch off or unscrew the fuse.
• Clean the side panels and door surfaces with a clean and soft
cloth only. If necessary, use a moist cloth (water + detergent).
Alternatively, use a microfibre cloth.
- Do not use abrasive sponges or scourers, do not use concentrated
cleaning agents and never use cleaning agents containing sand,
chloride or acid or chemical solvents, as these would damage
the surfaces and could cause corrosion.
• Clean the inside and equipment with lukewarm water and a little
detergent.
Do not use steam cleaners
because of the risk of injury and damage.
• Ensure that no cleaning water penetrates into the electrical
components or ventilation grille.
• Dry all parts well with a cloth.
Brightness control for interior
light
The brightness of the light inside the appliance can also be
adjusted.
Adjust the brightness of the light
by turning the control shown.
• Do not damage or remove the type plate on the inside of the
appliance. It is very important for servicing purposes.
Malfunctions
You may be able to rectify the following faults by checking
the possible causes yourself
• Appliance does not function:
–Is the appliance switched on?
–Is the plug correctly fitted in the mains socket?
–Is the fuse intact?
• Loud running noise:
–Is the appliance set up firmly on the floor?
–Does the appliance cause nearby items of furniture or objects to
vibrate? Please note that noises caused by the refrigerant circuit
cannot be avoided.
Safety lock
The lock in the appliance door is
equipped with a safety mechanism.
Locking the appliance:
• Insert the key as shown by arrow
1.
• Turn the key 90°.
To unlock the appliance, the same
procedure must be repeated in the
same order.
• The temperature is not low enough:
–Is the temperature setting correct (see "Setting the temperature")?
– Does the separately installed thermometer show the correct
reading?
– Is the ventilation system working properly?
– Is the appliance set up too close to a heat source?
If none of the above causes
apply and you cannot rectify
the fault yourself, contact the
nearest customer service department stating the type designation ➊, service number ➋
and appliance number ➌ as
indicated on the type plate.
The position of the type plate
is shown in the description of
the appliance.
Defrosting
The appliance defrosts automatically. The water that forms on the
rear wall drains into a reservoir at the back of the appliance and
evaporates automatically through the compressor heat.
Shutting your appliance down
If your appliance is to be shut down for any length of time, switch
it off and disconnect the plug or switch off or unscrew the fuse.
Clean the appliance and leave the door open in order to prevent
unpleasant smells.
The appliance complies with the relevant safety regulations and
EC Directives 2004/108/EC and 2006/95/EC.
9