Type BLM80
instructions
istruzioni
instrucciones
Bedienungsanleitungen
gebruiksaanwijzing
한국어
English
2-9
10 - 19
1
1
bq
2
3
3
4
br
5
6
bk
bl
bm
bn
bo
4
bp
7
8
9
2
bs
Your Blend-X PRO blender has 6 pre-set
programmes available for all core blending tasks
plus the flexibility of variable speed and pulse for
total control. Each programme has been set to
provide the perfect consistency every time, whether
its puréeing ingredients for soups, crushing ice for
cocktails, blending breakfast smoothies, grinding
coffee or preparing salsa.
●
●
●
before using your Kenwood appliance
Read these instructions carefully and retain for
future reference.
Remove all packaging and any labels.
Wash the parts: see ‘care and cleaning’.
safety
IMPORTANT: HOT BLENDING INSTRUCTIONS
To minimise the possibility of scalding when blending hot
ingredients keep hands and other exposed skin away from the
lid to prevent possible burns. The following precautions must
be observed:
● CAUTION: Blending very hot ingredients may
result in hot liquid and steam being forced
suddenly past the lid or filler cap 1.
● We recommend that hot ingredients are allowed
to cool before blending.
● NEVER exceed 1200ml / 5 cups capacity if processing hot
liquids, such as soups (refer to the markings on the goblet).
● ALWAYS use the pre-set “Soup” program bl for blending
hot liquids and NEVER use the pulse setting.
● Liquids which tend to foam such as milk, should be limited
to a maximum capacity of 1000ml/4 cups.
● Take care when handling the blender as the goblet and its
contents will be very hot.
● Take particular care when removing the lid. The lid is
designed to be a tight fit to prevent leakage. If necessary
protect your hands with a cloth or oven gloves when
handling.
● Ensure the goblet is securely attached to the base and
when removing from the appliance, guide the base and
ensure it is removed together with the goblet.
2
●
●
●
Ensure that the lid and filler cap are securely in place before
every blending operation.
Always ensure that the vents in the filler cap are clear before
every blending operation bq.
When fitting the lid to the goblet always ensure that the lid
and goblet rim are clean and dry to ensure a good seal and
prevent spillage.
safety
●
Switch off and unplug:
before fitting or removing parts;
● when not in use;
● before cleaning.
Never fit the blade unit to the power unit without
the blender goblet fitted.
Ensure the cord is fully unwound from the cord
storage device bs before using the blender.
Always unplug the appliance before putting your hands or
utensils in the goblet.
The blender lid must be fitted when using the stir stick in the
goblet.
Only use the stir stick br for processing cold ingredients. DO
NOT use when processing hot liquids.
Always take care when handling the blade assembly and
avoid touching the cutting edge of the blades when cleaning.
Only operate the blender with the lid in place.
Only use the goblet with the blade assembly supplied.
Never let the power unit, cord or plug get wet.
Never use a damaged appliance. Get it checked or repaired:
see ‘service and customer care’.
Never use an unauthorised attachment.
SCALD RISK: Hot ingredients should be allowed to cool to
room temperature before blending.
Never leave the appliance unattended when it is operating.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
3
●
●
●
●
●
●
●
●
●
●
●
●
●
●
When removing the blender from the power unit:
● wait until the blades have completely stopped;
● don’t accidentally unscrew the goblet from the blade
assembly.
Never run the blender empty.
Never blend more than the maximum capacity stated in the
recommended speed chart.
To ensure long life of your blender, do not run it for longer
than 3 minutes.
Smoothie recipes - never blend frozen ingredients that have
formed a solid mass during freezing, break it up before adding
to the goblet.
This appliance shall not be used by children. Keep the
appliance and its cord out of reach of children.
Do not process hard spices such as Nutmeg or Turmeric root
as they may damage the blade.
Don’t use the blender as a storage container. Keep it empty
before and after use.
Always use the blender on a secure, dry level surface.
Never place this appliance on or near a hot gas or electric
burner or where it could touch a heated appliance.
Important - The skirt on the base of the goblet is fitted
during manufacture and no attempt should be made to
remove it.
Misuse of your blender can result in injury.
Appliances can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and if they
understand the hazards involved.
Only use the appliance for its intended domestic use.
Kenwood will not accept any liability if the appliance is subject
to improper use, or failure to comply with these instructions.
4
●
●
8 Choose one of the following options:
Programme buttons:- Turn the speed control to the
‘On’ position and all the buttons will light up. Press the
required programme button and the lights on the other
buttons will go out and the programme will start. The
blender will switch off automatically at the end of the
programme time. If you wish to stop before the
programme time has elapsed, press the selected
programme button again.
● Manually selected a speed by turning the speed control
until the required speed is reached. At the end of
blending return the speed control to “O” before
removing the blender.
● Do not remove the goblet until the blades
have stopped rotating and the speed control
is in the ‘O’ position.
● (P) Pulse – operates the motor in a start/stop action.
The pulse will operate for as long as it is held in
position.
before plugging in
Make sure your electricity supply is the same as the
one shown on the underside of your handmixer.
This appliance conforms to EC directive 2004/108/EC
on Electromagnetic Compatibility and EC regulation no.
1935/2004 of 27/10/2004 on materials intended for
contact with food.
●
key
1
2
3
4
5
6
7
8
9
bk
bl
bm
bn
bo
bp
bq
br
bs
filler cap
lid
goblet
sealing ring
blade unit
blade base
Power On indicator
speed + pulse control
power unit
drinks programme button
soups programme button
ice crush programme button
fine chop programme button
coarse chop programme button
rinse programme button
vents
stir stick
cord storage device
Refer to the troubleshooting section if you
experience any problems with the operation of
the blender.
to use the stir stick
1 Fit the lid to the goblet and remove the filler cap. DO
NOT use the stir stick in the goblet without the lid fitted.
2 Insert the stir stick 4 and move it round the goblet
slowly whilst the motor is operating.
3 Use the stir stick to help move ingredients around the
goblet and prevent clogging during processing.
to use your blender
1 Fit the sealing ring 4 into the blade unit 5 - ensuring
the seal is located correctly in the grooved area. Then fit
the blade unit into the goblet 3.
● Leaking will occur if the seal is damaged or
incorrectly fitted.
2 Screw the blade base 6 onto the goblet – ensuring the
blade assembly is fully tightened. Refer to the graphics
on the side of the blade base as follows:
●
●
- unlocked position
- locked position
Put your ingredients into the goblet.
Fit the filler cap to the lid and push down to secure.
Fit the lid by pushing down until secure.
Place the blender onto the power unit.
● Ensure the cord is fully unwound from the
cord storage device before using the blender.
● The appliance will not work if the blender is
incorrectly fitted.
7 Plug in and the Power On indicator 7 will light up.
Note: The Power On indicator will flash if the goblet is
not fitted to the power unit. Select a speed (refer to the
recommended speed chart).
3
4
5
6
●
5
hints
To blend dry ingredients - cut into pieces, remove the
filler cap, then with the machine running, drop the
pieces down one by one. Keep your hand over the
opening. For best results empty regularly.
When making mayonnaise, put all the ingredients,
except the oil, into the blender. Remove the filler cap.
Then, with the appliance running, add the oil slowly
through the hole in the lid.
Thick mixtures, e.g. pâtés and dips, may need scraping
down. If the mixture is difficult to process, add more
liquid and use the stir stick supplied.
Programme Button
Drinks
Soups
Ice Crush
Fine Chop
Recommended Usage Chart (Programme buttons)
Usage/Food Items
Max.
Programme
Recommended
Time
Quantity
Cold Liquids
Max 1.6 litres
60 secs
Drinks & Cocktails
Max 1.2 litres
Milkshakes and milk based drinks
Smoothies
1 litre Liquid
Place the fresh fruit and liquid ingredients in
first (includes yoghurt, milk and fruit juices).
Then add ice or frozen ingredients (includes
frozen fruit, ice or ice cream)
Stock based soups 1.2 litre
1.2 litres
30 secs
Soups using milk 1 litre
1 litre
DO NOT use the stir stick when processing hot liquids.
We recommend that hot ingredients are allowed to cool before
blending. However should you wish to process hot ingredients
please read the Hot Blending Safety instructions.
Ice crushing - Automatic pulsing action.
300g
30 secs
A change in speed will be noted - this is
(14 ice cubes)
normal.
Freeze fruit juice in ice trays for Slushie
type drinks
Sorbet recipes
350g
30 secs X 2
40g sugar
250g Frozen fruit
1 egg white
Use the stir stick
Instant Ice Cream
600g
30 secs X 2
100g sugar
300g Frozen mixed berries
150g whipping cream
Use the stir stick
Use for chopping nuts, breadcrumbs and
30 secs
similar dry ingredients.
Grinding Coffee Beans and Spices.
Coffee Beans
200g
For best results
Almonds
200g
manually stop the
program when
Spices such as black peppercorns,
200g
you have achieved
cardamon seeds, cumin seeds, coriander
the desired result.
seeds, fennel seeds.
Hints
• For optimum performance when
processing spices we recommend
that you do not process more than 200g
at a time.
• Whole spices retain their flavour for a
much longer time than ground spices so
it is best to grind a small quantity fresh at
a time to retain the flavour.
• To release the maximum flavour and
essential oils whole spices are best
roasted prior to milling.
6
Recommended Usage Chart (Programme buttons)
Usage/Food Items
Max.
Recommended
Quantity
Raw vegetables (such as onion, leeks,
250g
carrots, celery)
350g
Salsa
200g onion cut into quarters
Coarse Chop
1 red chilli cut in half
½ red pepper
few coriander leaves
1 plum tomato
Use to rinse the goblet before taking apart
500mls warm
for cleaning.
water Max
Rinse
For best results always take the blender
apart for cleaning and dry thoroughly before
re-assembling.
Programme Button
Programme
Time
10 secs
10 secs
30 secs
Processing times stated are for guidance only and will vary depending on the exact recipe used, ingredients
being processed and personal preference. Stop the processing when the desired result has been achieved.
Recommended Usage Chart (Manual Control)
Recommended
Speed
Qty
Mayonnaise
Max 3 egg mix
Max
Caesar Dressing
Max 200g
Mid
Vegetable Purees /Baby Food
300g
Min - Mid
Fruit Purees
200g - 500g
Max
Batter mixes
Max 1 litre
Max
Uncooked meat (Lean Beef,
150g
Max
Pork and Lamb)
Lean Beef cut into 2 cm cubes
Usage/Food items
Time
60 secs
70 secs
60 secs
30 secs
15 secs
5 secs
Processing times stated are for guidance only and will vary depending on the exact recipe used, ingredients
being processed and personal preference. Stop the processing when the desired result has been achieved.
care and cleaning
●
●
●
●
●
●
●
blade assembly
1 Unscrew the base from the goblet by turning in a
clockwise direction. Refer to the graphics on the
side of the base.
- unlocked position
Always switch off, unplug and dismantle before
cleaning.
Empty the goblet before unscrewing it from the
blade unit.
Don’t immerse the blade unit in water.
The goblet can be washed in your dishwasher.
- locked position
2 Then lift out the blade unit.
● Care should be taken when removing the
blade unit from the base.
3 Remove and wash the sealing ring.
4 Don’t touch the sharp blades – brush them clean
using hot soapy water, then rinse thoroughly under
the tap. Don’t immerse the blade unit in
water. DO NOT DISHWASH.
5 Leave to dry upside down.
power unit
Wipe with a damp cloth, then dry.
Don’t immerse the power unit in water.
Wind excess cord 2 into the cord storage device
bs.
other parts
Wash by hand, then dry.
7
service and customer care
●
If the cord is damaged it must, for safety reasons,
be replaced by KENWOOD or an authorised
KENWOOD repairer.
If you experience any problems with the
operation of the blender, before calling for
assistance refer to the troubleshooting
guide.
●
●
●
●
●
If you need help with:
using your appliance or
servicing or repairs
Contact the shop where you bought your
appliance.
Designed and engineered by Kenwood in the UK.
Made in China.
IMPORTANT INFORMATION FOR CORRECT
DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH EC DIRECTIVE
2002/96/EC.
At the end of its working life, the product must not be
disposed of as urban waste.
It must be taken to a special local authority differentiated
waste collection centre or to a dealer providing this
service.
Disposing of a household appliance separately avoids
possible negative consequences for the environment
and health deriving from inappropriate disposal and
enables the constituent materials to be recovered to
obtain significant savings in energy and resources. As
a reminder of the need to dispose of household
appliances separately, the product is marked with a
crossed-out wheeled dustbin.
8
저희 드롱기켄우드코리아(주)에서는 품목별 소비자 분쟁해결 기준 공정거래위원회
고시에 따라 아래와 같이 제품에 대한 보증을 실시합니다.
서비스 요청시 080-848-8800으로 연락해 주십시오.
상담서비스 및 수리를 제공해 드리겠습니다.
푸드 블렌더
BLM800
푸드 블렌더
- 구입일자 확인이 어려운 경우 제조년월로 부터 6개월이 경과된 날로 부터 보증기간을 가산 합니다.
고객 상담 및 서비스
080 848 8800
HEAD OFFICE: Kenwood Limited, 1-3 Kenwood Business Park, New Lane, Havant, Hampshire PO9 2NH
123961/1