Ruckus H510 Unleashed
Multiservice 802.11ac Wave 2 Wired/Wireless Wall Switch
DATA SHEET
HIGH PERFORMANCE 802.11AC WAVE 2 INTEGRATED WIRED/
WIRELESS WALL SWITCH
Ruckus H510 Unleashed enables controller-less Wi-Fi architecture for hospitality and
small business environments with superior performance, lower costs and simplified
management. Separate controllers and access point licenses are no longer needed,
significantly reducing upfront costs. Set-up is also easy, thanks to a simplified web
interface that helps businesses configure Wi-Fi in just 60 seconds.
BENEFITS
UNLEASH THE PERFORMANCE
In the Unleashed version, the Ruckus H510 is capable of
supporting controller-less deployments for up to 25 access
points and 100 concurrent devices per AP.
WAVE 2 MU-MIMO
Network performance improved by transmitting to multiple
clients at the same instant.
CONVERGED IP SERVICES
Multiple SSIDs, port-based VLANs and four Gigabit
Ethernet access ports make the H510 Unleashed ideal for
supporting concurrent IP-based services such as VoIP,
IPTV, high-speed Internet access and in-room device
connectivity — both wired and wireless
ADDITIVE PERFORMANCE WITH
BEAMFLEX+
BeamFlex+ adaptive antennas improve Wi-Fi signal quality
by adapting to device location and orientation, which is ideal
for better performance on handheld mobile devices
MODULAR SUPPORT
The H510 Unleashed has been designed to accommodate
snap-on modules for a variety of applications including
connectivity beyond Wi-Fi
FLEXIBLE DEPLOYMENT OPTIONS
The H510 Unleashed requires a single cable drop and
operates under standard 802.3af PoE, reducing cabling,
switch ports and power sourcing equipment
SLEEK, INCONSPICUOUS COMPACT
FORM FACTOR FOR BEST AESTHETICS
The H510 Unleashed is the industry’s first Wave 2 802.11ac wired and wireless
wall switch using Ruckus’ patented BeamFlex+ adaptive antenna technology to
deliver high-speed 802.11ac Wi-Fi in an ultra-sleek, low-profile design that can be
discretely installed over a standard electrical junction box. Ideal for offering converged
services in hotel guest rooms, student residences, and multi-dwelling units, the
H510 Unleashed provides an easy way to offer multiple connections in a single room
without multiple cables.
The H510 Unleashed supports Multi-User MIMO (MU-MIMO) as a Wave 2
solution and can increase network throughput by transmitting to two Wave 2 clients
at the same instant in time. This efficient utilization of the Wi-Fi channel boosts
performance for Wave 2 clients but also frees up airtime for all clients, which means
even non-Wave 2 clients see a performance benefit.
The “mobile device ready” H510 Unleashed with BeamFlex+ adapts in real time
to client device location and physical orientation, delivering consistent Wi-Fi
performance. The BeamFlex+ adaptive antenna system of the H510 Unleashed is
optimized to deliver best-in-class Wi-Fi coverage and performance in hotel guest
rooms and MDU residences.
Equipped with four Ethernet ports for in-room access, the H510 Unleashed can be
used to connect a range of wired network devices such as IPTV set top boxes, IP
telephones, or networked minibars while simultaneously providing dual band 802.11ac
wireless LAN coverage. An IEEE 802.3af-compliant Power-over-Ethernet (PoE) port
on the H510 Unleashed allows devices such as IP telephones to be powered directly
from the wall switch. The H510 Unleashed itself may be powered via standard PoE or
a DC power adapter.
The H510 Unleashed offers maximum flexibility and future-proofed utility. It is
designed to securely support future add-on radio modules for wireless connectivity
beyond best-in-class Wi-Fi. The cable pathways at the rear, support legacy cabling
such as RG6 or CAT3/CAT5. Existing services such as video and voice over Ethernet
can co-exist within the same junction box, reducing both installation time and
construction costs.
Installs into any standard electrical outlet box creating a
low profile, secure design and front port access which
eliminates unsightly cabling and disruptive furniture
placement
INTEGRATED POE SUPPORT ELIMINATES
MORE WIRES
POE out to power devices such as IP-based VoIP phones
eliminates the need for more power cords and clutter
© 2017 RUCKUS WIRELESS, INC. COMPANY PROPRIETARY INFORMATION
Ruckus H510 Unleashed
Multiservice 802.11ac Wave 2 Wired/Wireless Wall Switch
DATA
DATASHEET
SHEET
145 mm
FEATURES
29 mm
90 mm
•
Integrated dual radio 2x2 802.11ac Wave 2 Wi-Fi AP and Ethernet wall switch
supporting Multi-User MIMO (MU-MIMO)
•
Ruckus patented BeamFlex+ adaptive antennas optimized for in-room performance and mobile clients
•
Matched Band Coverage ensures similar Wi-Fi coverage for both 2.4 and 5 GHz
client devices
•
Modular options for add-on radios
•
Powered by either PoE or 48VDC
•
Supplies PoE power for in-room devices such as VoIP phones
•
SmartCast QoS
•
Multiple BSSIDs per radio with unique QoS and security policies
•
WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i
•
802.1X support for RADIUS and Active Directory
•
Dynamic PSK*
•
Gateway mode with NAT and DHCP services
•
Application recognition and control
•
Mounts over a standard US and EU single gang wall jack
•
RJ-45 for uplink Ethernet port
•
Cable channel for preserving legacy infrastructure (e.g. PBX phones)
•
SmartMesh Networking
© 2017 RUCKUS WIRELESS, INC. COMPANY PROPRIETARY INFORMATION
Ruckus H510 Unleashed
DATA
DATASHEET
SHEET
Multiservice 802.11ac Wave 2 Wired/Wireless Wall Switch
CONVERGED WIRED AND WIRELESS SERVICES
Laptop
SmartPhone
VoIP Phone
In-room IP device
(eg. minibar)
IPTV
Printer
© 2017 RUCKUS WIRELESS, INC. COMPANY PROPRIETARY INFORMATION
TITLE GOES
Ruckus
H510 Unleashed
HERE
CASE
DATA
DATASHEET
STUDY
SHEET
SUB-TITLE 802.11ac
Multiservice
GOES HERE
Wave 2 Wired/Wireless Wall Switch
PHYSICAL CHARACTERISTICS
Power
Physical Size
Weight
Physical Ports
•
•
•
POE 802.3af/802.3at
48VDC input
•
•
•
230 g
292 g with bracket
•
Mounting Options
Environmental
Conditions
Power Draw
•
•
•
•
•
90 mm x 145 mm x 29 mm
4 10/100/1000 Mbps Base-T 802.3, 802.3u, RJ-45
Ethernet access ports.
1 10/100/1000 Mpbs Base-T 802.3, 802.3u, 802.3ab,
802.3af (802.3at class 4) PoE input, RJ-45
USB 2.0
Electrical wallbox; Standard US and EU single gang
wall jack
Optional bracket for offset & wall mount
Operating Temperature:
32°F (0°C) - 104°F (40°C)
Operating Humidity: 15% - 95%
non-condensing
•
•
•
Idle: 6.5 W
Typical: 7.3 W
Peak, no PoE out load: 9.2W
Max load on PoE out:
• 4W with 802.3af for PoE
• 12.95W with 802.3at PoE in
RF
Minimum Rx Sensitivity
•
Up to -99dBm
Beamflex* Sinr Tx Gain
•
2dB
Beamflex* Sinr Rx Gain
•
3-5dB (PD-MRC)
Interference Mitigation
•
5dB
* BeamFlex gains are statistical system level effects translated to enhanced SINR based on
observations over time in real-world conditions with multiple APs and many clients
PERFORMANCE AND CAPACITY
Concurrent users
•
100
Voice Calls
•
30
BSSID
•
8 BSSIDs per radio
MULTIMEDIA AND QUALITY OF SERVICE
802.11e/WMM
•
Supported
Software Queues
•
Per traffic type (4), per client
Traffic Classification
•
Automatic, heuristics and TOS based or
VLAN-defined
Rate Limiting
•
Dynamic, per-user or per-WLAN
NETWORK ARCHITECTURE
IP
•
IPv4
VLANs
•
802.1X For Ethernet
Ports
•
•
•
802.1Q (1 per BSSID or dynamic, per user
based on RADIUS)
Port-based
MANAGEMENT
Deployment Options
•
Ruckus Unleashed, controller-less
Configuration
•
•
Web User Interface (HTTP/S)
CLI (Telnet/SSH), SNMP v1, 2, 3
WI-FI
•
IEEE 802.11a/b/g/n/ac
802.11n/ac: 6.5Mbps – 173.4Mbps (20MHz)
13.5Mbps – 400Mbps (40MHz)
29.3Mbps – 867Mbps (80MHz)
802.11a: 54, 48, 36, 24, 18, 12, 9 and 6Mbps
802.11b: 11, 5.5, 2 and 1 Mbps
802.11g: 54, 48, 36, 24, 18, 12, 9 and 6 Mbps
Rf Power Output*
(Aggregate)
•
•
•
•
•
•
•
•
•
•
2 x 2 : 2 SU-MIMO
2 x 2 : 2 MU-MIMO
Channelization
•
20MHz, 40MHz, 80MHz
Frequency Band
•
•
IEEE 802.11 b/g/n: 2.4 – 2.484GHz
IEEE 802.11a/ac: 5.15 – 5.25GHz; 5.25 – 5.35GHz;
5.47 – 5.725GHz; 5.725 – 5.85GHz
Operating
Channels
•
•
•
2.4GHz : 1-13
5GHz : 36-64, 100-140, 149-165
Channel availability is country dependent according to
the local regulations
Wireless
Security
•
•
WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i
Authentication via 802.1X with local authentication database, support for RADIUS, LDAP, and Active Directory
Standards
Mimo Configuration
Supported
Data Rates
2.4GHz: 18dBm
5.0GHz: 22dBm
* Maximum power varies by country
**See price list for latest country certifications
PRODUCT ORDERING INFORMATION
MODEL
DESCRIPTION
Ruckus H510 Wi-Fi Wall Switch
9U1-H510-XX00
802.11ac dual-band concurrent 2.4 GHz & 5 GHz, Wired/
Wireless Wall Switch, BeamFlex+, 1 10/100/1000 & 4 10/100
Ethernet Access Ports, POE in, PoE out (one port), USB port.
Does not include DC power supply.
Optional Accessories
902-0170-XX00
•
902-0162-XX00
•
PoE injector (Qty. 1)
902-0126-0000
•
Optional Surface-mount bracket
Power Supply (Qty. 1)
PLEASE NOTE: When ordering Indoor APs, you must specify the destination region by indicating
-US, -WW, or -Z2 instead of XX. When ordering PoE injectors or power supplies, you must specify the
destination region by indicating -US, -EU, -AU, -BR, -CN, -IN, -JP, -KR, -SA, -UK, or -UN instead
of -XX.
For access points, -Z2 applies to the following countries: Algeria, Egypt, Israel, Morocco, Tunisia,
and Vietnam
Warranty: Sold with a limited lifetime warranty.
For details see: http://support.ruckuswireless.com/warranty
Authenticator
Supplicant
Copyright © 2017, Ruckus Wireless, Inc. All rights reserved. Ruckus Wireless and Ruckus Wireless design are registered in the
U.S. Patent and Trademark Office. Ruckus Wireless, the Ruckus Wireless logo, BeamFlex+, MediaFlex, FlexMaster, ZoneDirector,
SpeedFlex, SmartCast, SmartCell, ChannelFly and Dynamic PSK are trademarks of Ruckus Wireless, Inc. in the United States and
other countries. All other trademarks mentioned in this document or website are the property of their respective owners.
17-07-A
Ruckus Wireless, Inc. | 350 West Java Drive | Sunnyvale, CA 94089 USA | T: (650) 265-4200 | F: (408) 738-2065
ruckuswireless.com
Download PDF

advertising