32MD311B 32MD301B LCD TV/DVD

Owner’s Manual
Manuel du Propriétaire
Manual del Propietario
32MD311B
32MD301B
LCD TV/DVD
English
Necesita ayuda
inmediata?
Français
1-866-341-3738
Quick Use Guide Inside!
Guide d’usage Rapide Incluse!
Guía de Uso Rápido Incluida!
MODEL NUMBER
SERIAL NUMBER
1-866-341-3738
Español
1-866-341-3738
2
Return your Product Registration Card or register online at
www.magnavox.com/support today to get the very most from your purchase.
Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and
return your Product Registration Card at once, or register online at www.magnavox.com/support to ensure:
*Product Safety Notification
*Additional Benefits
By registering your product, you'll receive notification
- directly from the manufacturer - in the rare case of
a product recall or safety defect.
Registering your product guarantees that you'll
receive all of the privileges to which you're
entitled, including special money-saving offers.
Know these
This “bolt of lightning” indicates uninsulated material
within your unit may cause an electrical shock. For the
safety of everyone in your household, please do not
remove product covering.
safety symbols
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The “exclamation point” calls attention to features for
which you should read the enclosed literature closely to
prevent operating and maintenance problems.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled
with liquids, such as vases, should not be placed on this apparatus.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
ATTENTION: Pour éviter les choc électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et
pousser jusqu’au fond.
Visit our World Wide Web Site at www.magnavox.com/support
Wall Mount Bracket Kit
Recommended Wall Mount Bracket Kit:
Brand: SANUS
Model #: San25b
Do NOT use screws packed
with Wall Mount Bracket Kit.
Recommended Screw dimension when purchased:
M4 x 0.787” (20mm) + Washer 0.078”(T2mm)
•
•
•
•
The recommended Wall Mount Bracket Kit (sold
separately) allows the mounting of the TV on the wall.
For detailed information on installing the wall mount,
refer to the Wall Mount Instruction Book.
Funai is not responsible for any damage to the product
or injury to yourself or others if you elect to install the
TV Wall Mount Bracket or mount the TV onto the
Bracket on your own.
The Wall Mount Bracket must be installed by experts.
Funai not liable for these types of accidents
or injury noted below.
•
•
Install the Wall Mount Bracket on a sturdy vertical wall.
If installed onto a ceiling or slanted wall, the TV and Wall
Mount Bracket may fall which could result in a severe injury.
• Do not use screws that are longer or shorter than their
specified length. If screws too long are used this may cause
mechanical or electrical damage inside the TV set. If screws
too short are used this may cause the TV set to fall.
• Do not fasten the screws by excessive force; this may
damage the product or cause the product to fall, leading to
an injury.
• For safety reasons use 2 people to mount the TV onto a
Wall Mounting Bracket.
• Do not mount the TV onto the Wall Mounting Bracket
while your TV is plugged in or turned on. It may result in an
electrical shock injury.
When installing the unit on the wall, allow this much space.
Top:
11.8 inches (30cm)
Left and right side:
5.9 inches (15cm)
Bottom:
3.9 inches (10cm)
English
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16. Tilt/Stability - All televisions must comply with recommended
international global safety standards for tilt
and stability properties of its cabinet design.
• Do not compromise these design standards by applying
excessive pull force to the front, or top, of the cabinet
which could ultimately overturn the product.
• Also, do not endanger yourself, or children, by placing
electronic equipment/toys on the top of the cabinet. Such
items could unsuspectingly fall from the top of the set and
cause product damage and/or personal injury.
17. Wall or Ceiling Mounting - The appliance should be
mounted to a wall or ceiling only as recommended by the
manufacturer.
18. Power Lines - An outdoor antenna should be located
away from power lines.
19. Outdoor Antenna Grounding - If an outside antenna
is connected to the receiver, be sure the antenna system is
grounded so as to provide some protection against voltage
surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFPA
No. 70-1984, provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of
grounding connectors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode. See Figure below.
20. Object and Liquid Entry - Care should be taken so
that objects do not fall and liquids are not spilled into the
enclosure through openings.
21. Battery Usage CAUTION - To prevent battery
leakage that may result in bodily injury, property damage,
or damage to the unit:
• Install all batteries correctly, with + and - aligned as
marked on the unit.
• Do not mix batteries (old and new or carbon and
alkaline, etc.).
• Remove batteries when the unit is not used for a long
time.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings.
Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and third grounding prong. The wide blade or third
prong are provided for your safety. When the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Damage Requiring Service - The appliance should be
serviced by qualified service personnel when:
A. The power supply cord or the plug has been damaged;
B. Objects have fallen, or liquid has been spilled into the
appliance;
C. The appliance has been exposed to rain
D. The appliance does not appear to operate normally or
exhibits a marked change in performance;
E. The appliance has been dropped, or the enclosure damaged.
Note to the CATV system installer : This reminder is provided to call the CATV system installer’s attention to Article
820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall
be connected to the grounding system of the building, as close to the point of cable entry as practical.
Example of Antenna Grounding as
per NEC - National Electric Code
GROUND CLAMP
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMPS
ELECTRIC SERVICE EQUIPMENT
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
3
4
FCC WARNING
This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference
unless the modifications are expressly approved in the manual. The user could lose the authority to operate this apparatus if an
unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This apparatus
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this apparatus does cause harmful interference to radio or television reception, which can be determined by turning the apparatus off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the apparatus and receiver.
3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
DECLARATION OF CONFORMITY
Trade Name: MAGNAVOX
Model: 32MD311B / 32MD301B
Responsible Party: FUNAI CORPORATION, Inc.
Address: 19900 Van Ness Avenue, Torrance, CA 90501 U.S.A.
Telephone Number: 1-866-341-3738
This Class B digital apparatus complies with Canadian ICES-003. Standard Television Receiving Apparatus, Canada BETS-7 / NTMR-7
CAUTION : Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING : Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.
This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.
Make sure to leave a space of 4 inches (10cm) or more around this apparatus.
WARNING: To prevent injury, this apparatus must be securely attached to the wall in accordance with the instructions.
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or
climbing on it. A falling unit can cause serious injury or even death.
LASER SAFETY
This apparatus is classified as a CLASS 1 LASER PRODUCT. This apparatus employs a
laser. Only a qualified service person should remove the cover or attempt to service this
apparatus, due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This item incorporates copy
protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are prohibited.
Like all LCD products, this set contains a lamp with Mercury, please dispose of according to all Local, State and
Federal laws. For the disposal or recycling information, contact:
www.mygreenelectronics.com or www.eiae.org
• The American Academy of Pediatrics discourages television
viewing for children younger than two years of age.
NOTE ABOUT RECYCLING
• This unit’s packaging materials are recyclable and
can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
• Batteries should never be thrown away or
incinerated but disposed of in accordance with your
local regulations concerning chemical wastes.
• For product recycling information, please visit - www.magnavox.com
WHEN CARRYING THIS UNIT
• At least 2 people are required when
carrying this unit.
• Make sure to hold the upper and bottom
frames of the unit firmly as illustrated.
TO AVOID THE HAZARDS OF
ELECTRICAL SHOCK AND FIRE
• Do not handle the AC power cord with wet hands.
• Do not pull on the AC power cord when disconnecting it from an
AC outlet. Grasp it by the plug.
• Do not put your fingers or objects into the unit.
LOCATION AND HANDLING
• Do not install the unit in direct sunlight or in a place subject to dust
or strong vibration.
• Avoid a place with drastic temperature changes.
• Install the unit in a horizontal and stable position. Do not place
anything directly on top or bottom of the unit. Depending on your
external devices, noise or disturbance of the picture and / or sound
may be generated if the unit is placed too close to them. In this case,
please ensure enough space between the external devices and the
unit.
• Depending on the environment, the temperature of this unit may
increase slightly. This is not a malfunction.
• Be sure to unplug the AC power cord from the AC outlet before
moving or carrying the unit.
DEW CONDENSATION WARNING
• Dew condensation may form inside the unit in the following
conditions. If so, do not use this unit at least for a few hours until its
inside gets dry.
- The unit is moved from a cold place to a warm place.
- Under conditions of high humidity.
- After heating a cold room.
English
5
Child Safety
SYL Eme_Child Safety_1EMN24522_v1 1
2008/12/17 18:05:53
6
INTRODUCTION
Trademark Information
Contents
Important Safety Instructions
Child Safety
INTRODUCTION
Trademark Information
Symbols Used in this Manual
Features
Supplied Accessories
Installing the Batteries
Attaching the Base
Mounting the Unit on Your Furniture
Remote Control Function
Control Panel
Terminals
Cable Management
PREPARATION
Antenna Connection
Connection to Cable Receiver or Satellite Box
Plug In the AC Power Cord
Initial Setup
WATCHING TV
Sleep Timer
Switching Each Input Mode
Freeze Mode
Channel Selection
TV Screen Display Mode
Sound Functions
TV Screen Information
USING FUNCTIONS
Picture
Sound
Channel
Features
Language
DVD
Language Code List
OPERATING DVD
Playable Media
Unplayable Media
Playback
Disc Menu
Resume Playback
Paused and Step-by-step Playback
Fast Forward / Fast Reverse
Slow Forward / Slow Reverse
Zoom
Search Functions
Repeat Playback
Repeat A-B Playback
Random Playback
Programmed Playback
On-screen Display
Special Settings
CONNECTING DEVICES
External Device Connection
USEFUL TIPS
Troubleshooting Guide
FAQ
INFORMATION
3
5
6
6
7
8
8
8
8
9
10
11
11
12
12
12
13
14
14
14
14
15
15
16
18
18
19
20
24
25
27
28
28
29
29
29
29
29
30
30
30
31
31
31
31
32
32
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
is a trademark of DVD Format/Logo Licensing Corporation.
© 2011 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied,
transmitted, disseminated, transcribed, downloaded or stored in any
storage medium, in any form or for any purpose without the express prior
written consent of Funai. Furthermore, any unauthorized commercial
distribution of this manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Funai
reserves the right to change the content herein without the obligation to
notify any person or organization of such changes.
with the
design is a registered trademark of Funai Electric
Co., Ltd. and may not be used in any way without the express written
consent of Funai. All other trademarks used herein remain the exclusive
property of their respective owners. Nothing contained in this manual
should be construed as granting, by implication or otherwise, any license
or right to use any of the trademarks displayed herein. Misuse of any
trademarks or any other content in this manual is strictly prohibited.
Funai shall aggressively enforce its intellectual property rights to the
fullest extent of the law.
MAGNAVOX is a registered trademark of Philips Electronics North
America Corporation and is used by Funai Electric Co. Ltd. and Funai
Corporation, Inc. under license from Philips Electronics North America.
Symbols Used in this Manual
The following is the description for the symbols used in this
manual. Description refers to:
TV FUNCTIONS
ATSC
: Digital TV operation
NTSC
: Analog / Cable TV operation
• If neither symbol appears, the operation is applicable to both.
DVD FUNCTIONS
34
DVD
CD
36
38
Glossary
Maintenance
General Specifications
Other Specifications
39
39
40
40
Limited Warranty
41
: Playback of DVD-video
: Playback of audio CD
• If neither symbol appears under the function heading, operation is
applicable to both.
English
DVD
TV
DTV /TV / CATV
•
Information Display (ATSC only)
You can use your remote control to select channels which are
broadcast in digital format and conventional analog format. Also,
cable subscribers can access their cable TV channels.
You can display the title, contents and other information of the
current DTV program on the TV screen.
•
Autoprogram
•
Child Lock
This unit automatically scans and memorizes channels available in
your area, eliminating difficult setup procedures.
Dolby Digital Sound
•
Still / Fast / Slow / Step Playback
•
DVD Menus in a Desired Language
•
Auto standby
•
Parental Lock
•
Resume Playback
•
•
Bit Rate Indication
DRC (dynamic range control)
Enjoy Dolby Digital multi-channel surround sound when you
connect the unit to your Dolby Digital decoder.
Various playback modes are available including still pictures, fast
forward/reverse, slow motion and step frames.
You can display DVD menus in a desired language, if available on
a DVD-video.
If there is no operation for 20 minutes, the unit will go into
standby mode automatically.
Block the viewing of a DVD-video unsuitable for children.
•
Closed Caption Decoder
•
MTS / SAP Tuner
•
Auto Standby
•
Sleep Timer
•
Choices for On-screen Language
•
Subtitles in a Desired Language
Stereo Sound Function
PLL Frequency Synthesized Tuning
•
Selecting a Camera Angle
•
Zoom
•
•
•
Black Level Adjustment
Virtual Surround
Search
•
Marker
•
Repeat
Audio can be selected from the remote control.
If there is no input signal and no operation for 15 minutes, the
unit will go into standby mode automatically.
You can set the unit to go into standby mode after a specific
amount of time.
Select your on-screen language:
English, Spanish or French.
•
Various Adjustment for Picture and Sound
•
fun-Link via HDMI Link (HDMI Cable not Included)
HDMI Input
HDMI-DVI Input
When using HDMI 1 Input, you can enjoy this unit as a PC
monitor if your PC has a DVI output terminal.
Component Video Input
S-Video Input
AV Input
Digital Audio Output
Analog Audio Output
You can select a desired language for displaying subtitle, if that
language is available on a DVD-video.
You can select the desired camera angle, if a DVD contains
sequences recorded from different angles.
Allows you to enlarge the size of picture image.
chapter search / title search / track search / time search
The part on the disc designated by user can be called back.
chapter / title / track / all / A-B
Accessing from MODE button
In stop mode
•
Program Playback for audio CD
•
Random Playback for audio CD
You can program the order of tracks to play them back in
designated order.
This unit can shuffle the order of tracks to play them back in
randomly.
Accessing from AUDIO button
USEFUL TIPS
•
•
•
•
•
fun-Link allows your other HDMI link devices to be controlled by
the HDMI cable connected to your TV.
During playback
CONNECTING DEVICES
•
•
Customizes image quality suitable for your room and sets your
sound preference.
You can control the range of sound volume.
Accessing from MODE button
OPERATING DVD
Provides free and easy channel selection and lets you tune
directly to any channel using the number and decimal point “•”
buttons on the remote control.
Lets you resume playback from the point at which playback was
stopped.
USING FUNCTIONS
•
•
Built-in closed caption decoder displays text for closed caption
supported programs.
WATCHING TV
This feature allows you to block children’s access to inappropriate
programs.
•
PREPARATION
•
INTRODUCTION
Features
7
During playback
Choices for Audio Language and Stereo Sound Function
Select your desired languages or stereo sound function when
different options are available on your disc.
INFORMATION
•
8
Supplied Accessories
Owner’s Manual
Quick Start Guide Registration card
If you have any questions, please visit our website at
www.magnavox.com/support
Quick
Start
EN
Attaching the Base
You must attach the base to the unit to have it as a table top
unit. Be sure the front and rear of the base match the proper
direction. At least 2 people are required for these steps.
1
Installation
FR
Installation
ES
Instalación
Best
Better
Good
2
TV base and 4 screws
(M4 x 20)
Remote Control
(NF801UD)
Batteries
(AAA, 1.5V x 2)
Spread a thick and soft cloth over a table as shown at step 2.
Place the main unit face down onto it. Make sure not to
damage the screen.
Insert 2 hooks under the
bottom of the main unit ➁
into base holes (shown by
arrow ➀), then move the
base in the direction as
shown by arrow ➁ until it
➀
stops and the screw holes
are aligned. Make sure not
to put the AC power cord between the base and the unit.
Drive Phillips head screws
into the 4 threaded holes
at the bottom of the base
until they are tight.
FRONT
3
AAA
A
AA
To remove the base from this unit
Note
• If you lose the screws, please purchase M4× 20 Phillips head
screws at your local store.
• If you need to replace these accessories, please refer to the part
name and No. with the illustrations and call our toll free customer
support line found on the cover of this manual.
When using a universal remote control to operate this unit.
• Make sure the component code on your universal remote control
is set to our brand. Refer to the manual accompanying your
remote control for more details.
• We do not guarantee 100% interoperability with all universal
remote controls.
Installing the Batteries
Install the batteries (AAA, 1.5V x 2) matching the polarity
indicated inside battery compartment of the remote control.
• Unscrew the Phillips head screws in step 3.
After the screws are removed, pull the base up toward the rear of the
unit. Be careful not to drop the base when you remove it.
Note
• When attaching the base, ensure that all screws are tightly fastened. If
the base is not properly attached, it could cause the unit to fall, resulting
in injuries as well as damage to the unit.
• Make sure to use a table which can support the weight of this unit and
is larger than this unit.
• Make sure the table is in a stable location.
• When attaching the base, ensure that FRONT ↑ written on the base is
downward. If it’s not downward, the 2 hooks don’t fit in the base.
Mounting the Unit on Your Furniture
Screw this unit on your furniture tightly using wood screws
(not supplied) in the 2 holes at the back of the base as shown.
• Recommended screw dimension : 0.201 x 0.788 inches (5.1 x 20 mm)
A
AA AAA
screw holes
Battery Precautions:
• Be sure to follow the correct polarity as indicated in the battery
compartment. Reversed batteries may cause damage to the device.
• Do not mix different types of batteries together (e.g. Alkaline and
Carbon-Zinc, or rechargeable batteries like ni-cad, ni-mh, etc) or old
batteries with fresh ones.
• If the device is not to be used for a long period of time, remove the
batteries to prevent damage or injury from possible battery leakage.
• Do not try to recharge batteries; they can overheat and rupture.
rear of the unit
Note
• When you remove this unit make sure to unscrew the wood
screws from your Wood Stand, Furniture and other wood item.
English
13
14
15
16
17
MENU
▲/▼/◄/►(cursor)
OK
BACK
PREV CH
➠
➠
➠
➠
➠
p.17
p.13
p.13
p.16
p.14
➠
➠
p.15
p.14
Press to return to the previously viewed channel.
11 VOL + / −
12 Number buttons
ATSC
NTSC
PREPARATION
1
2
3
4
5
6
7
6
7
8
9
10
INTRODUCTION
Remote Control Function
9
• Press to select channels.
18
• (dot)
• Press to shift the subchannel from the main channel.
DVD
19
10
20
+10 button
• Press to select 10 or higher number of chapters.
13 FREEZE
ATSC
p.14
➠
p.29
➠
p.29
➠
p.29
➠
p.15
• Press to pause screen image.
12
14 EJECT A
Press to eject the disc.
22
15 DISC MENU
Press to display the menu on a disc.
16 TITLE
Press to display the title menu (DVD).
17 FORMAT
1
(power)
p.13
2 SLEEP
3 SOURCE
4 SAP /AUDIO
➠
➠
➠
p.14
p.14
p.15
18 INFO
19 REV E / FWD D
➠ p.16, 32
➠ p.29
Press to begin slow forward or slow reverse playback
during the pause mode (DVD) and search backward or
forward through a disc.
PLAY B
Press to begin the disc playback.
➠
p.30
➠
p.29
➠
p.29
➠
➠
➠
p.15
p.14
p.30, 31
ATSC
SKIP H / SKIP G
• Press to select the audio language.
Press to skip backward or forward chapters, titles (DVD)
or tracks (CD) of the disc.
NTSC
PAUSE F
• Press to select the audio mode.
DVD
Press to pause the disc playback.
CD
• Press to select the audio language (DVD), or sound
mode (CD).
5 MODE
➠
p.7
• Press to arrange the playing order or playback
randomly (CD).
• Press to set the black level (DVD) and the virtual
surround on or off.
• Press to change the camera angle to see the sequence
being played back from different angle (DVD).
• Press to search chapter, title (DVD), track (CD) or time.
• Press to set the marker.
• Press to repeat playback chapter, title (DVD), track, disc
(CD) repeatedly or between designated point A and B.
• Press to magnify the part of picture (2x and 4x : DVD).
• Press to select the subtitles on a disc (DVD).
STOP C
Press to stop the disc playback.
20 MUTE
21 CH + / −
22 CLEAR
• Press to clear the numbers entered incorrectly.
• Press to cancel the point A for A-B repeat.
• Press to remove the track number in program input
(CD).
INFORMATION
p.29
USEFUL TIPS
➠
CONNECTING DEVICES
➠
Press to turn the unit on and go into standby mode.
To completely turn off the unit, you must unplug the AC
power cord.
Press to select aspect ratio available for the TV screen.
OPERATING DVD
➠
NTSC
USING FUNCTIONS
21
11
CD
• Press to select chapter, title (DVD), or track (CD)
directly.
WATCHING TV
8
9
10
Control Panel
1 VOLUME + / −
32MD311B
➠
p.15
➠
➠
p.17
p.14
➠
➠
➠
➠
p.29
p.29
p.29
p.13
Press to adjust the volume or move right (+) / left (−)
through the main menu items.
2 MENU
3 CHANNEL + / −
Press to select channels or move up (+) / down (−)
through the main menu items.
DVD
8 9 10
−VOLUME+
MENU
−CHANNEL+
1
2
3
11
POWER
4
5
6
4 A (eject)
5 C (stop)
6 B (play)
POWER
7
Press to turn the unit on and go into standby mode.
To completely turn off the unit, you must unplug the AC
power cord.
8 DVD indicator
7
Lights up orange when a disc is inserted.
9 STAND BY indicator
Lights up red when the unit goes into standby mode.
10 POWER ON indicator
32MD301B
Lights up green when power is on.
11 Infrared sensor window
Receives infrared rays transmitted from the remote
control.
DVD
STAND BY POWER ON
8 9 10 11
−VOLUME+
MENU
−CHANNEL+
1
2
3
POWER
4
5
6
7
English
32”
Side Panel
12 HDMI 2 Input jack
➠ p.12, 34
13 S-Video / Composite Video /Audio (L/R) Input jacks
for VIDEO
➠ p.34
14
13
15
16
17
DVI
ANALOG
AUDIO
18
19
20
21
20 Digital Audio Output jack
21 Antenna Input jack
22 HDMI 1 (HDMI-DVI) Input jack
➠ p.35
➠ p.12
➠ p.12, 34, 35
Note for service terminal
terminal (service use only)
*• service
Use this terminal only when a software update is necessary.
CONNECTING DEVICES
• User should not connect any devices to the service terminal such
as digital camera, keyboard, mouse, etc. (because these will not
work).
• The software update is, in most cases, handled by an authorized
service person or in some circumstances the user may be asked
to do the software update themselves.
OPERATING DVD
HDMI connection for HDMI or DVI device.
When you connect your PC that has a DVI terminal,
you can enjoy this unit as a PC monitor.
USING FUNCTIONS
22
Audio cable connection from a DVI device.
When you connect your PC that has a DVI terminal,
use a stereo mini plug conversion cable as well.
(For HDMI 1 Input jack only)
WATCHING TV
*
PREPARATION
12
Rear Panel
14 Disc loading slot
➠ p.29
15 AC power cord
➠ p.12
16 Cable management
➠ p.11
17 Component Video and Audio (L/R) Input jacks
➠ p.12, 34
18 Analog Audio (L/R) Output jacks
➠ p.35
19 Analog Audio (L/R) Input jacks for HDMI 1
Input jack
➠ p.34, 35
INTRODUCTION
Terminals
11
USEFUL TIPS
Keep the cables through this holder to avoid tangling them.
INFORMATION
Cable Management
12
PREPARATION
No supplied cables are used with these connections:
• Please purchase the necessary cables at your local store.
Before you connect:
Be sure your antenna or other device is connected properly
before plugging in the AC power cord.
Connection to Cable Receiver or
Satellite Box
Use an HDMI or Component Video cables to connect the
HDMI or the Component Video Input jacks of the unit to the
HDMI or the Component Video output jacks of the cable
receiver / satellite box.
If you connect to the unit’s Component Video Input jacks,
connect Analog Audio cables to the Analog Audio L/R Input
jacks for the Component Video connector jacks.
component video cables
(red / blue / green) and audio cables
Antenna Connection
Connect the RF coaxial cable on your home outlet to the
antenna input jack of this unit.
(green) (blue) (red)
AUDIO OUT
L
R
COMPONENT VIDEO OUT
Y
Pb/Cb
Pr/Cr
HDMI OUT
or
VHF / UHF
analog
or
DTV antenna
STEREO
PCM
cable receiver /
satellite box
ANT IN
HDMI cable
or
or
satellite dish
RF coaxial cable
RF coaxial cable
or
cable TV signal
including PPV
Once connections are completed, turn on the unit and begin
initial setup. Channel scanning is necessary for the unit to
memorize all available channels in your area.
[Initial Setup]➠ p.13
You can also connect this unit to the cable receiver or satellite box
other than the HDMI or the Component Video output jacks or
Composite Video output jack (➠ p.35) because they might have
different output jacks.
Required cables and connecting methods of the cable receiver /
satellite box, or the availability channel for the clear QAM may differ
depending on the cable / satellite provider or local TV broadcaster.
For more information, please contact your cable / satellite provider
or local TV broadcaster.
Note
Note
cable TV signal
• If you have any question about the DTV’s antenna, visit
www.antennaweb.org for further information.
• Depending on your antenna system, you may need different types
of combiners (mixers) or separators (splitters) for HD TV signal
the minimum RF bandpass on these devices is 2,000MHz or 2GHz.
• For your safety and to avoid damage to this unit, please unplug the
RF coaxial cable from the antenna input jack before moving the
unit.
• If you did use an antenna to receive analog TV, it should also
work for DTV reception. Outdoor or attic antennas will be more
effective than a set top or inside antenna.
• To switch your reception source easily between antenna and cable,
install an antenna selector.
• If you are not receiving a signal from your cable service, contact the
Cable provider.
• Use an HDMI cable with the HDMI logo (a certified HDMI cable).
High Speed HDMI cable is recommended for the better compatibility.
Plug In the AC Power Cord
Make sure that the AC power cord must be plugged to an AC
outlet after all the necessary connections are made.
Caution:
• Do not connect the AC power cord to a power supply outside
the indicated voltage of this unit (AC 120V).
Connecting the AC power cord to a power supply outside of this
range may result in fire or electrical shocks.
Note
• Each time you plug in the AC power cord, no operations will be
performed for a few seconds. This is not a malfunction.
English
4
Use ◄/► to select the desired location setting, then press
OK.
Initial Setup
Initial Setup
Select “Retail” or “Home” for your location.
Retail
Use ▲/▼ to select [Antenna] for TV channels or [Cable]
for CATV channels, then press OK.
Initial Setup
Antenna
Select your signal source.
Cable
Skip
Antenna
Or
Cable
ANT.IN
OK
OK
BACK
Back
MENU
Skip
Note
• If you are not receiving a signal from your cable service, contact
the Cable provider.
• If you press or MENU during autoprogram, this setup of TV
channels will be canceled.
• The initial autoprogram function can be executed for either
[Antenna] or [Cable] only once. When you change the
connection (Antenna / Cable), set [Autoprogram] again. ➠ p.19
• If there is no signal input from the antenna terminal and no
operation for several seconds after you turn on the unit, helpful
hints appears. Follow the instructions listed on the TV screen.
Initial Setup
Retry
• [Autoprogram] will begin.
No channel is registered.
Try Autoprogram again?
Verify that you have a cable connected to the “ANT. IN” jack
on the back of the TV, the channel installation process
searches this connection. If you are using a cable or satellite
box, please confirm the input which you have connected to the
box and press “SOURCE” key on the remote control to select
the appropriate source input.
Initial Setup
Please wait while the system is scanning for channels.
Auto programming may take more than 20 minutes to
complete.
0%
0 ch
Analog channels
0 ch
MENU
OK
OK
After an initial setup is completed...
Skip
MENU
Skip
INFORMATION
• If you want to scan the channels automatically again.
[Autoprogram]
➠ p.19
• You can add the desired cable and analog channels
unmemorized by autoprogram.
[Add Channels]
➠ p.20
• If you want to change to another language.
[Language]
➠ p.24
• If you want to change the location setting.
[Location]
➠ p.24
USEFUL TIPS
Select
Digital channels
Later
CONNECTING DEVICES
Select
• Select [Retail] store, the unit will be set up with
predefined setting for retail displays.
• Select [Home], the unit is set to maximize the energy
efficiency for home setting and it can be adjusted
through a choice of picture and sound quality according
to your preference.
• When the initial setup is completed, the lowest
memorized channel with the confirmation message of
the location setting will be displayed on the TV screen.
• You must set [Home] in step 4. Otherwise, [Picture]
and [Sound] settings you adjusted will not be
memorized after the unit goes into standby mode.
OPERATING DVD
Make sure the antenna is connected to ''ANT. IN'' jack.
OK
USING FUNCTIONS
Use ▲/▼ to select the on-screen language from the
choices (English / Español / Français) on the right side of the
TV screen, then press OK.
OK
WATCHING TV
Make sure the unit is connected to antenna or cable.
1 After making all the necessary connections,
press to turn on the unit.
• It may take a few moments to turn on the unit for the
first time.
• [Initial Setup] menu appears automatically after the
unit is turned on.
3
Home
Select
Before you begin:
PREPARATION
This section will guide you through the unit’s initial setting
which includes selecting a language for your on-screen menu
and autoprogram, which automatically scans and memorizes
viewable channels.
2
INTRODUCTION
These operations are accessible by remote control.
Some may also be accessible by controls on the main unit.
13
14
WATCHING TV
Sleep Timer
can set the unit to go into standby mode after an incremental period of time.
Press SLEEP repeatedly to change the amount of time (increases
the time by 30 minutes up to 120 minutes).
Press SLEEP once to call up the display for checking the remaining time.
• To cancel sleep timer, press SLEEP repeatedly until [Sleep Off] is
displayed.
Sleep
120min.
Switching Each Input Mode can easily switch with the remote control
between TV (ATSC or NTSC) and external devices when they are connected to the unit.
Press SOURCE or CH + repeatedly to cycle through the input modes.
Source
Video
TV
Video
Component
11.1
Component
DTV /TV channel
HDMI1
HDMI2
HDMI2
HDMI1
(or PC input)
• Pressing CH − reverses the direction of the input modes.
Freeze Mode can freeze the image shown on the TV screen for 5 minutes.
Press FREEZE to freeze the image.
Freeze
• The sound output will not be paused.
• To cancel freeze mode, press any buttons except .
Channel Selection
Select channels by using CH + / − or the Number buttons.
• To select the memorized channels,
use CH + / − or the Number buttons.
• To select the non-memorized channels,
use the Number buttons.
11.1
To use the Number buttons
ATSC
- When selecting digital channel 11.1
Be sure to press • before entering the subchannel number.
NTSC
- When selecting cable or analog channel 11
Press PREV CH to return to the previously viewed channel.
Note
• [No Signal] will appear on the TV screen after the subchannel
broadcast is over.
• [Audio only program] message will appear on the TV screen, when you
receive only sound signal.
15
English
Press FORMAT repeatedly to switch the TV aspect ratio.
For 16:9 video signal
4:3
Movie expand
Zoom
For 4:3 video signal
Normal displays a 4:3 picture at its original size.
Sidebars appear on both edges of the screen.
16:9 displays a 4:3 picture at a 16:9 size; the picture is
stretched horizontally to fill the screen.
Movie expand displays a 4:3 picture at a 16:9 size;
16:9
Movie expand
Wide
Zoom
For PC input signal through
Input mode
Full
Dot By Dot
OPERATING DVD
Normal
HDMI1
the picture is stretched more vertically at the top of
the screen. This crops out the top of the picture.
Zoom displays a 4:3 picture at a 16:9 size; at its
maximum size that is more vertically stretched to fill the
screen.This crops out the top and bottom of the picture.
Wide displays the picture with its center at the
original size and the edges stretched horizontally to fill
the screen.
Normal displays a proportionately stretched picture.
Sidebars appear on both edges of the screen.
Full displays a picture that is stretched out of
proportion horizontally to fill the screen.
Dot By Dot displays a picture in its original size.
USING FUNCTIONS
Normal
WATCHING TV
Wide
shortened horizontally. Sidebars appear on both edges
of the screen.
Movie expand displays a 16:9 picture that is
vertically stretched to fill the screen. This only crops
out the top of the picture.
Zoom displays a 16:9 picture at its maximum size
without changing its horizontal and vertical ratio.
Wide displays a horizontally stretched picture. This
crops out the left and right sides of the picture.
PREPARATION
Normal
Normal displays a 16:9 picture at its original size.
4:3 displays a 16:9 picture at a 4:3 size; the picture is
INTRODUCTION
TV Screen Display Mode
5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of display
modes can be selected for PC input signal.
CONNECTING DEVICES
Sound Functions
describe how to change the audio or the audio language as well as the volume.
Volume Adjustment
Use VOL + / − to adjust the volume.
Volume
30
will be displayed for a few seconds when adjusting the volume.
Press MUTE to turn off the sound temporarily.
hi!
will be displayed for a few seconds.
Mute
• Press MUTE again or VOL + / − to recover the original volume.
salut!
hola
!
NTSC
ATSC
Press SAP/AUDIO repeatedly to cycle through the available
audio languages.
• Available languages differ depending on the broadcast.
• [Other] is displayed when the audio language cannot be
acquired, or the acquired languages are other than English,
Spanish or French.
11.1
Press SAP/AUDIO to display the currently selected audio mode.
While receiving an MTS broadcast, press repeatedly to cycle
through the available audio channel.
11
SAP / STEREO
e.g.) When all audio are available
SAP / STEREO
SAP / MONO
SAP / STEREO
English 1/3
STEREO
SAP
MONO
: Outputs stereo-audio
: Outputs second audio program
: Outputs mono-audio
INFORMATION
Switching Audio Mode
USEFUL TIPS
Silence Mode
16
TV Screen Information
You can display the currently selected channel or other
information such as the audio mode on the TV screen.
In the digital mode, the detailed broadcasting information
for the current off the air channel such as program title and
program guides are displayed.
1
Press INFO.
ATSC
1
2
3
A Day of Memories
4
11-1
KABC
A quarter-century ago,which may now qualify as the
good old days of newspapering,run-of-paper sales
accounted for 80 percent of the industry's advertising
revenues.Department stores and supermarket were
English 1/2
1080i
1080i
HD
HD
Rating
16:9
16:9
CC
CC
TV: TV-14
5
6, 7, 8
9
10
NTSC
4
11
SAP / STEREO
480i
480i
SD
SD
4:3
4:3
TV-PG DLSV CC
CC
5
6, 7, 8
9
10
1 program title
2 program guide
(The program guide added to broadcasting
information is displayed to a maximum of 4 lines.)
3 broadcast station
4 channel number
5 audio language (ATSC) / audio mode (NTSC)
[Switching Audio Mode] ➠ p.15
6 effective scanning lines and scan mode
7 TV format
8 program’s image aspect ratio
9 CC (not available if closed caption is set to [Off])
10 child lock rating
2
Press INFO or BACK to hide the information.
Note
• When the program guide consists of more than 4 lines, use ▲/▼
to scroll to the next / previous lines.
• [No description provided.] is displayed when the program guide
is not provided.
• While the program guide is displayed, the closed caption function
is interrupted.
• In external input mode, the following screen is displayed;
e.g.) When an external device is connected to Video Input jack.
Video
480i
480i
SD
SD
CC
TV-PG DLSV CC
• The information display will automatically disappear in 1 minute.
English
INTRODUCTION
USING FUNCTIONS
This section describes the overview of the main menu
displayed when you press MENU.
The main menu consists of the function setting items below.
Press MENU to display
the main menu.
2
Use ▲/▼ to select a desired menu and an item, then
press OK to determine the setting.
Page 18
Adjusting the picture mode, or customize the
picture quality as your preference.
Sound
Channel
Features
Sound
DVD
Page 18
Adjusting the sound mode, equalizer and some
other sound functions.
Page 19
Scanning the channels available in your area and
see what the antenna levels are.
Page 20
Adjusting the Closed Caption, parental guide and
some other useful functions.
Page 24
You can choose English, Spanish, or French
as your on-screen language.
Page 25
You can choose the desired DVD settings.
3
When the setting is completed, press MENU to exit.
INFORMATION
DVD
USEFUL TIPS
Language
CONNECTING DEVICES
Features
OPERATING DVD
Channel
USING FUNCTIONS
Language
WATCHING TV
Picture
Picture
PREPARATION
1
17
18
Picture
Picture
Smart Sound
Sound
Equalizer
Before you begin:
Channel
Auto Volume Leveling
Off
You must set [Home] in [Location]. ➠ p.24
Otherwise, the settings you adjusted will not be memorized
after the unit goes into standby mode.
Features
TV Speakers
Ext. Amp
Language
Primary MTS
Stereo
1
Use ▲/▼ to select the item you want to adjust, then press
OK.
2
DVD
2
Adjust the following items.
Smart Sound
Picture
Smart Picture
Sound
Brightness
30
Channel
Contrast
60
Features
Color
36
Language
Tint
DVD
Sharpness
Color Temperature
Standard
Personal
0
0
Normal
Use ▲/▼ to select the desired setting, then press OK.
([Personal], [Standard], [Movie], [Music], and [News])
Equalizer
Adjust tonal quality for each frequency.
Use ◄/► to select the specific frequency and use ▲/▼ to
adjust the level, then press OK.
Adjust the following items.
Auto Volume Leveling
Smart Picture
Use ▲/▼ to select the desired setting, then press OK.
([Personal], [Standard], [Sports], [Movie], and [Game])
Brightness, Contrast, Color, Tint, Sharpness,
Color Temperature
You can only adjust the following options when you set to
[Personal] in [Smart Picture].
Use ▲/▼ to select the desired setting, then press OK. Then
use ◄/► to adjust the setting.
Cursor ◄
Cursor ►
Brightness
to decrease brightness
to increase brightness
Contrast
to decrease contrast
to decrease color
intensity
to add red
to increase contrast
to increase color
intensity
to add green
Color
Tint
Sharpness
to soften
Color
to add warm colors
Temperature
This function keeps a constant loudness differential between
the TV commercials and the programs.
Use ▲/▼ to select the desired option, then press OK.
On
Off
TV Speakers
Select the audio output from the unit’s speakers, or not. If your
amplifier is HDMI link function compatible and connected by
an HDMI cable to this unit, some sound operations such as
volume up can be changed by using this unit’s remote control.
Make sure [fun-Link Control] is set to [On]. ➠ p.23
Use ▲/▼ to select the desired option, then press OK.
On
Off
to sharpen
to add cool colors
Reduces volume differences between the
TV commercials and the programs.
Removes the auto volume leveling.
Ext. Amp
The sound will be output from the unit’s speakers.
The sound will not be output from the unit’s
speakers.
You can control audio output from your
connected HDMI link devices by using this unit's
remote control.
Note
Sound
• We do not guarantee 100% interoperability with other brands of
HDMI link compliant devices.
Before you begin:
Primary MTS
You must set [Home] in [Location]. ➠ p.24
Otherwise, the settings you adjusted will not be memorized
after the unit goes into standby mode.
You can set the output mode as a default for the sound mode
(NTSC only).
This setting is not interlocked when you change the output
mode by pressing SAP/AUDIO. [Sound Functions] ➠ p.15
1
Use ▲/▼ to select the item you want to adjust, then press
OK.
Use ▲/▼ to select the desired option, then press OK.
Stereo
Mono
SAP
Outputs stereo-audio.
Outputs mono-audio.
Outputs second audio program.
19
English
Before you begin:
Make sure the unit is connected to antenna or cable.
Use ▲/▼ to select the item you want to adjust, then press
OK.
Autoprogram
Sound
Channel List
Channel
Add Channels
Features
Antenna
Channel List
The channels selected here can be skipped when selecting the
channels using CH + / −.
Those channels can still be selected with the Number buttons.
Language
DVD
1
2
Adjust the following items.
Autoprogram
Use ▲/▼ to select [Channel List], then press OK.
Use ▲/▼ to select the channel you want to remove, then
press OK.
If you switch wires (e.g. between antenna and CATV) or if you
move the unit to a different area after the initial setting, or if
you restore the DTV channels you deleted, it is recommended
to use Autoprogram to perform a new channel search.
Picture
DTV
11.1
Sound
DTV
11.2
Channel
DTV
11.3
Features
Language
Use ▲/▼ to select [Autoprogram], then press OK.
DVD
Use ▲/▼ to select an appropriate option, then press OK.
Ch Select
Picture
Channel
Autoprogram will rescan all channels.
Auto programming may take more than 20
minutes to complete.
Select your signal source.
Back
Antenna
Cable
Features
Language
Antenna
DVD
Cable
Or
ANT.IN
Watch / Skip
BACK
Back
• The channel display for the removed channel darkens.
You will not be able to select the channel again using
CH + / −.
• To reactivate a removed channel, use ▲/▼ and press
OK. The registered channels are highlighted.
• When you remove a main channel, its subchannels are
removed as well.
Note
Please wait while the system is scanning for channels.
Auto programming may take more than 20 minutes to complete.
• The channel with the [DTV] indicated on the display is ATSC.
Otherwise the channel is NTSC.
USEFUL TIPS
• When connected to VHF / UHF antenna, select [Antenna].
• When connected to CATV, select [Cable].
• [Autoprogram] will begin.
CONNECTING DEVICES
Sound
OK
OPERATING DVD
1
2
Highlight channels for
Ch Up / Down key selection.
USING FUNCTIONS
2
WATCHING TV
Picture
PREPARATION
1
• After setting [Autoprogram], using CH + / − on the remote control
skips unavailable programs automatically.
• If you are not receiving a signal from your cable service, contact
the Cable provider.
• If you press or MENU during autoprogram, the setup of TV
channels will be canceled.
• Even if [Autoprogram] is completed, the channel setting will be
lost if the AC power cord is unplugged before the unit goes into
standby mode by pressing .
• The PIN code will be required once you set a PIN code in the
[Child Lock]. ➠ p.21
• If you want to change your PIN code, follow the instruction of
[Change PIN]. ➠ p.23
INTRODUCTION
Note
Channel
75%
10 ch
Analog channels
6 ch
MENU
Exit
• When the scanning and memorizing are completed, the
lowest memorized channel will be displayed.
INFORMATION
Digital channels
20
Add Channels
This function lets you add the off the air along NTSC or analog
Cable channels that were not added by the autoprogram due
to reception conditions at the initial setting.
1
2
Features
1
Use ▲/▼ to select the item you want to adjust, then press
OK.
Use ▲/▼ to select [Add Channels], then press OK.
Use the Number buttons to enter the number of the
channel you want to add, then press OK.
11
Channel
Features
Language
Closed Caption
Sound
Child Lock
Channel
fun-Link (HDMI CEC)
Features
Energy Saving Mode
On
Language
Location
Home
DVD
Current Software Info
Add channels
Picture
Sound
Picture
For analog channels, select a
channel to be added using
number keys.
2
For digital channels, you must
perform Autoprogram function.
DVD
Adjust the following items.
Closed Caption
Ch Change
BACK
You can view closed captioning (CC) for TV programs,
movies and news. Closed caption refers to text of dialog or
descriptions displayed on-screen.
Back
Note
• If setup completes successfully, [Added to the channel list.] is
displayed.
• If external input is used, it is not possible to register the channel
and [Unavailable] will be displayed on the TV screen.
• By using CH + / −, you can select the memorized channels only.
Use ▲/▼ to select [Closed Caption], then press OK.
See the following description for setting each item.
Antenna Confirmation
Picture
Caption Service
On
Sound
Digital Caption Service
On
Channel
Caption Style
A
B
C
Features
Language
ATSC
DVD
This function lets you check the digital signal strength of each
channel.
1
2
Use ▲/▼ to select [Antenna], then press OK.
Use the Number buttons or CH + / − to select the channel
for which you want to check the digital signal strength.
11.1
A. Caption Service
1 Use ▲/▼ to select [Caption Service], then press OK.
2 Use ▲/▼ to select the desired closed caption, then press
OK.
Off
Back
Picture
CC-1 and T-1
Sound
Channel
Features
Language
Current
50 Max
50
DVD
Ch Change
Note
• If the channel is set to analog channel or external input, you
cannot confirm the antenna condition.
CC-3 and T-3
CC-2, CC-4,
T-2 and T-4
Select if you do not want caption service.
The primary caption and text services.The
captioning or text is displayed in the same language
as the program’s dialog (up to 4 lines of script on the
TV screen, where it does not obstruct relevant parts
of the picture).
Serve as the preferred data channels.
The captioning or text is often a secondary
language.
Rarely available and broadcasters use them only in
special conditions, such as when [CC-1] and [CC-3]
or [T-1] and [T-3] are not available.
• There are 3 display modes according to programs:
Paint-on
mode
Displays input characters on the TV screen
immediately.
Pop-on mode
Once characters are stored in memory, they are
displayed all at once.
Roll-up mode
Displays the characters continuously by scrolling
(max. 4 lines).
English
ATSC
In addition to the basic closed caption, DTV has its own closed
caption called digital caption service. Use this menu to change
the settings for digital caption service.
Use ▲/▼ to select [Digital Caption Service], then press
OK.
2
Use ▲/▼ to select the desired digital caption service, then
press OK.
Off
Note
C. Caption Style
ATSC
You can change the caption style such as font, color or size, etc.
Use ▲/▼ to select [Caption Style], then press OK.
Child Lock
Use ▲/▼ to select [User Setting], then press OK.
Child lock reads the ratings for programs, then denies access
to the programs which exceed the rating level you set. With
this function, you can block certain programs inappropriate
for children and any channels or external input modes can be
invisible.
Use ▲/▼ to select [On], then press OK.
1
Picture display
S o, you
yo u mus
must be Ph
hili
i l i p. H i !
I’m pleased
ple ased to m
meet
ee t yo u.
Edge
(Edge Color and Edge Type)
Font Style
Font Size
Font
Background
Edge
Font Color
Font
Opacity
Background
Color
Background
Opacity
Edge Color
Edge Type
Closed captioning font style, size,
color and opacity can be changed.
Background color and opacity of the
displayed caption can be switched.
Edge color and type of the displayed
caption can be switched.
Closed Caption
Sound
Child Lock
Channel
fun-Link (HDMI CEC)
Features
Energy Saving Mode
On
Language
Location
Home
DVD
Current Software Info
INFORMATION
• Review your setting choice made below by looking in
the upper right corner of the displayed setting box (not
all selections show the differences selected).
Picture
USEFUL TIPS
Font
(Font Style, Font Size, Font Color and Font Opacity or
Transparency)
Background
(Background Color and Background Opacity or
Transparency)
Use ▲/▼ to select [Child Lock], then press OK.
CONNECTING DEVICES
Use ▲/▼ to select an item, then press OK. Then use
▲/▼ to select the desired setting and press OK.
OPERATING DVD
1
2
3
4
USING FUNCTIONS
• [Digital Caption Service] that you can switch differs depending on
the broadcast description.
WATCHING TV
CS-1 to CS-6
Select if you do not want digital caption
service.
Select one of these before changing any
other item in [Closed Caption] menu.
Choose [CS-1] under normal circumstances.
• Closed caption will not be displayed when you are using an HDMI
connection.
• To show the closed caption on your TV screen, broadcast signal
must contain the closed caption data.
• Not all TV programs and commercials have the closed caption or
all types of the closed caption.
• Captions and texts may not exactly match the TV voice.
• Changing channels may delay the closed caption for a few seconds.
• Adjusting or muting the volume may delay the closed caption for
a few seconds.
• Abbreviations, symbols and other grammatical shortcuts may be
used in order to keep pace with the on-screen action. This is not
a malfunction.
• The caption or text characters will not be displayed while the
main menu or functions display is shown.
• If a black box appears on the TV screen, this means that the closed
caption is set to the text mode. To clear the box, select [CC-1],
[CC-2], [CC-3], [CC-4] or [Off].
• If the unit receives poor quality television signals, the captions may
contain errors, or there might be no captions at all. Some possible
causes of poor quality signals are:
- Automobile ignition noise
- Electric motor noise
- Weak signal reception
- Multiplex signal reception (ghosts or screen flutter)
- Data dropout and Pixelation (for DTV only)
• The unit retains the closed caption setting if the power fails.
• When the unit receives special effects playback signal (e.g. Search,
Slow and Still) from a VCR’s video output channel (ch3 or ch4),
the unit may not display the correct caption or text.
PREPARATION
1
Note
INTRODUCTION
B. Digital Caption Service
21
22
2
Use the Number buttons to enter the 4-digit number for
your PIN code.
Features
Language
_
Enter PIN.
Channel Lock
Sound
US Movie Ratings Lock
Channel
US TV Ratings Lock
Features
Canadian English Rating
Language
Canadian French Rating
DVD
Region Ratings Lock
US Movie ratings lock is the rating system created by MPAA.
1
• When you have not set up your PIN code,
enter 0, 0, 0, 0.
• When the PIN code is correct, [Child Lock] menu is
displayed.
• See the following description for setting each item.
Picture
B. Setting US Movie ratings
2
Use ▲/▼ to select [US Movie Ratings Lock], then press
OK.
Use ▲/▼ to select the desired rating, then press OK
repeatedly to switch between [View] and [Block].
A
B
C
Picture
X
Sound
NC-17
Channel
R
Features
PG-13
Language
PG
DVD
G
NR
Clear Region Ratings Lock
Select
D
Change PIN
Rating
OK
View / Block
BACK
Back
Category
Note
X
Mature audience only
• When you select a rating and set it to [Block], the higher ratings
will be blocked automatically. The lower ratings will be available for
viewing.
• When you set the highest rating to [View], all ratings turn to
[View] automatically.
• To block any inappropriate programs, set your limits in [US Movie
Ratings Lock], [US TV Ratings Lock] and [Region Ratings Lock].
• The child lock setting will be retained after a power failure or after
the power is removed for longer than 10 seconds (except the PIN
code reverts to 0000). [Child Lock] ➠ p.21
• If the rating is blocked, will appear.
• [Region Ratings Lock] will be available when the unit receives a
digital broadcast using the new rating system.
• For the United States, the unit may download the Region Ratings
Lock Table, if required.
• The Canadian rating systems on this unit are based on CEA-766-A
and CRTC policy.
NC-17
No one under 17 admitted
R
Restricted; under 17 requires accompanying
parent or adult guardian
PG-13
Unsuitable for children under 13
PG
Parental guidance suggested
G
General audience
NR
No rating
C. Setting TV ratings
1
2
Use ▲/▼ to select [US TV Ratings Lock], then press OK.
Use ▲/▼ / ◄/► to select the desired rating, then press
OK repeatedly to switch between [View] and [Block].
A. Channel Lock
Picture
Particular channels or external input modes can be invisible in
this function.
1
2
Use ▲/▼ to select [Channel Lock], then press OK.
FV
Sound
TV-MA
Channel
TV-14
Features
TV-PG
Language
TV-G
DVD
TV-Y7
Select
Rating
Features
Language
BACK
HDMI1
TV-PG
Parental guidance suggested
HDMI2
TV-G
General audience
TV-Y7
Appropriate for all children 7 and
older
TV-Y
Appropriate for all children
OK
View / Block
BACK
Back
D
Back
Category
Unsuitable for children under 14
40.1 DTV
Select
View / Block
TV-14
DVD
DVD
OK
Mature audience only
Component
Channel
L
TV-MA
Video
Sound
S
TV-Y
Use ▲/▼ to select the desired rating, then press OK
repeatedly to switch between [View] and [Block].
Picture
V
higher
lower
English
As for TV-MA, TV-14, TV-PG, or TV-Y7, you can further set the
sub ratings to block specific elements of programming. To set
the sub ratings, follow the step below.
Use ▲/▼ / ◄/► to select the desired rating, then press OK
repeatedly to switch between [View] and [Block].
FV
Sound
TV-MA
Channel
TV-14
Features
TV-PG
Language
TV-G
DVD
TV-Y7
V
S
L
This function allows you to operate the linked functions
between our brand devices with a fun-Link feature and this
unit connecting through an HDMI cable.
1
D
fun-Link Control
On
Sound
Auto Device Off
On
Channel
Auto TV On
On
Features
Device List
OK
View / Block
Category
Fantasy Violence
V
Violence
S
Sexual Situation
L
Coarse Language
D
Suggestive Dialog
DVD
Back
Rating
TV-Y7
TV-MA
TV-14
TV-PG
TV-14, TV-PG
Note
Use ▲/▼ to select the desired setting, then press OK.
Adjust the following items.
fun-Link Control
Set the fun-Link [On] or [Off].
The following additional settings will be grayed out when you
set to [Off].
Use ▲/▼ to select the desired setting, then press OK.
On
Off
Selects if you have connected an external device
that is compatible with the fun-Link function.
Disables all fun-Link.
Auto Device Off
D. Change PIN
You can set your device to turn off by interlocking from this
unit’s power.
Use ▲/▼ to select the desired setting, then press OK.
Use ▲/▼ to select [Change PIN], then press OK.
On
Press the Number buttons to enter the new 4-digit PIN
code.
• Enter PIN code again in [Confirm PIN.] entry field.
Off
Your connected fun-Link device turns off
automatically when the unit goes into standby
mode.
Your connected fun-Link device stays on even if
the unit goes into standby mode.
Auto TV On
Sound
Channel
Enter PIN.
_
Use ▲/▼ to select the desired setting, then press OK.
Features
Language
On
Confirm PIN.
DVD
BACK
Back
Note
• Make sure new PIN code and confirm PIN code must be exactly
the same. If they are different, the space is cleared for reentering.
• Your PIN code will be erased and returns to the default PIN code
(0000) when a power failure occurs.
• If you forget the PIN code, unplug the AC power cord then wait
for 10 seconds to plug the AC power cord in again.
The unit will restore the PIN code to 0000 as the factory default.
INFORMATION
Off
PIN Code
This unit turns on automatically when you turn on
your connected fun-Link device.
This unit stays the standby mode even if you turn
on your connected fun-Link device.
USEFUL TIPS
This unit will turn on detected when the power on signal is
sent from your connected fun-Link device.
Picture
CONNECTING DEVICES
Although the default PIN code (0000) is supplied with the unit,
you can set your own PIN code.
OPERATING DVD
• Blocked sub rating will appear beside the main rating category in
[US TV Ratings Lock] menu.
• You cannot block a sub rating (D, L, S or V) if the main rating is set
to [View].
• Changing the category to [Block] or [View] automatically changes
all its sub ratings to the same ([Block] or [View]).
2
3
USING FUNCTIONS
FV
BACK
WATCHING TV
Select
1
2
Picture
Language
TV-Y
Sub Rating
Use ▲/▼ to select [fun-Link (HDMI CEC)], then press
OK.
PREPARATION
Picture
fun-Link (HDMI CEC)
INTRODUCTION
To set the sub ratings
23
24
Device List
This function lets you see the product model number or name
of connected devices.
Use ▲/▼ to select the desired HDMI device listed on the TV
screen, then press OK.
Current Software Info
This function shows what version of the software currently
used.
1
2
Picture
Sound
HDMI1
NB620SL2
Channel
HDMI2
MBP5230
Use ▲/▼ to select [Current Software Info], then press
OK.
Confirm the version of the software currently used.
Features
Picture
Language
Sound
DVD
Channel
Features
Select
OK
Input Change
BACK
Back
Release Version:
XXXXXXX_XXX_X_XXXX
Language
Back
DVD
Energy Saving Mode
You can set whether the power consumption is saved or not.
1
2
Use ▲/▼ to select [Energy Saving Mode], then press OK.
Language
Use ▲/▼ to select the desired mode, then press OK.
On
Off
Reduces the power consumption.
Sets the backlight brighter.
Use ▲/▼ to select [English], [Español] or [Français], then
press OK.
Note
• You must set [Home] in [Location]. ➠ p.24
Otherwise, the settings you adjusted will not be memorized after
the unit goes into standby mode.
Picture
Sound
Select your menu language.
English
Seleccione el idioma para el menú.
Español
Sélectionnez la langue du menu.
Français
Channel
Features
Language
Location
DVD
You must set [Home] in this setting. Otherwise, [Picture] and
[Sound] settings you adjusted will not be memorized after you
turn off the unit.
1
2
Use ▲/▼ to select [Location], then press OK.
Use ▲/▼ to select the desired location, then press OK.
Retail
Home
The unit will be set up with predefined settings
for retail displays. In this setting, you can set the
backlight brighter.
The unit is set to maximize the energy efficiency
for home setting and it can be adjusted through a
choice of picture and sound quality according to
your preference.
Note
• If you need the English menus instead of the Spanish or French
menus, press MENU. Use ▲/▼ to select [Idioma] or [Langue],
then press OK.
Use ▲/▼ to select [English], then press OK.
Press MENU to exit the main menu.
English
Choose the appropriate audio settings for your equipment. It only
affects during the playback of DVD.
Settings are only effective when the unit is in DVD mode
and any discs should not be played back.
Use ▲/▼ to select the desired item, then press OK.
Use ◄/►to select a desired setting and an item, then press
OK to determine the setting.
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
LANGUAGE
ON
ON
BITSTREAM
PREPARATION
1
1
INTRODUCTION
DVD Audio Setting
DVD
25
ENTER/OK
ORIGINAL
OFF
ENGLISH
2
ENTER/OK
When the setting is completed, press MENU to exit.
(Default: ON)
DRC (dynamic range control)
This function is available only on the discs which are recorded
in the Dolby Digital format.
ON
OFF
DVD Language Setting
You can change the desired language when playing back the disc.
2
Use ▲/▼ to select the item you want to adjust, then press
OK.
Adjust the following items.
AUDIO *1, *2
(Default: ORIGINAL)
Select the desired audio language.
ON
OFF
When outputting in 48kHz.
When outputting the original sound.
Note
SUBTITLE *1, *2
(Default: OFF)
(Default: ENGLISH)
Select the desired language in DVD menu.
Note
DOLBY DIGITAL
(Default: BITSTREAM)
Set to [BITSTREAM] when this unit is connected to a Dolby
Digital decoder.
BITSTREAM
PCM
Outputs Dolby Digital signals.
Converts the Dolby Digital into PCM. (2 channel)
USEFUL TIPS
INFORMATION
• To change the on-screen language, call up [Language] from the
main menu and set the desired language. [Language] ➠ p.24
*1
• Language options are not available with some discs.
• If [OTHER] is selected in [AUDIO], [SUBTITLE] or
[DISC MENU] menu, press 4-digit number to enter the code for
the desired language. [Language Code List]. ➠ p.27
• Only the languages supported by the disc can be selected.
*2
• Language setting for Audio and Subtitle are not available with
some discs.
- Use MODE to select subtitles available on the DVD.
- Use SAP/AUDIO to select audio available on the DVD.
• If the DVD’s default settings for audio and subtitle are the same
language, the subtitles may not show unless you turn them on.
• When playing back a 96 kHz disc with the copyright protection
or when [Virtual Surround] is set to [1] or [2], the sound will be
down sampled at 48 kHz even if the [DOWN SAMPLING] is set
to [OFF]. [Virtual Surround]. ➠ p.33
CONNECTING DEVICES
Select the desired subtitle language.
DISC MENU *1
(Default: ON)
DOWN SAMPLING
This function is available only on digital outputting of a disc
recorded in 96kHz.
OPERATING DVD
1
Compress the range between soft and loud
sounds.
No effects (original sound).
USING FUNCTIONS
2
Adjust the following items.
WATCHING TV
AUDIO
SUBTITLE
DISC MENU
26
Parental Setting
Others
Parental setting prevents your children from viewing inappropriate
materials. (password protected.) Playback will stop if the ratings
exceed the levels you set.
You can change the other functions.
1
1
Use ▲/▼ to select the desired item, then press OK.
Use the Number buttons to enter the 4-digit password for
your password, then press OK.
OTHERS
ANGLE ICON
ON
STILL MODE
AUTO
AUTO POWER OFF ON
PARENTAL
PASSWORD
ENTER/OK
Please enter a 4-digit password.
ENTER/OK
2
2
3
• If you have set password already, use
the Number buttons to enter the current 4-digit
password.
• You cannot use the default password (4737) to play
back a DVD.
Use ▲/▼ to select the [PARENTAL LEVEL], then press
OK.
Use ▲/▼ to select the desired item, then press OK.
PARENTAL LEVEL
ALL
All parental locks are cancelled.
All ratings (adult / general / children) can be
8 [ADULT]
played back.
7 [NC-17]-2 [G] Only DVD intended for general use and
children can be played back.
Only DVD intended for children can be played
1 [KID SAFE]
back.
To change the password
4
5
At step 2, use ▲/▼ to select [PASSWORD CHANGE]
then press OK.
Use the Number buttons to enter the new 4-digit
password.
Adjust the following items.
ANGLE ICON
(Default: ON)
Set to [ON] to show the angle icon when multiple camera
angles are available during DVD playback.
STILL MODE
(Default: AUTO)
Set the picture quality in the still mode.
If you select [AUTO], it automatically selects the best
resolution setting ([FRAME] or [FIELD]) based on the date
characteristics of the pictures.
FIELD
FRAME
The picture in the still mode will be stabilized.
The picture in the still mode will be highly defined.
AUTO POWER OFF
(Default: ON)
Set to [ON] if there is no operation for 20 minutes, the unit
goes into standby mode.
Reset to the Default Setting
You can reset all the settings except for the parental setting and
on-screen menu language.
1
Use ▲/▼ to select [YES], then press OK.
Note
• DVD-video may not respond to parental lock settings. Make sure
this function works with your DVD-video.
• Record the password in case you forget it.
• If you forget the password, press 4, 7, 3, 7, then enter your new
password. Password will be cleared and parental levels will be set
to [ALL].
• A power failure will not erase your password.
INITIALIZE
Initialize?
NO
YES
ENTER/OK
Note
• When you want to cancel the initialization, select [NO], then press
OK.
English
Language
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
Laothian
Latin
Latvian;Lettish
Lingala
I-K
L-N
5861
5847
5868
5860
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
S
T
U-Z
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Note
• If you choose a language that has a 3-letter abbreviation, the code
will be displayed every time you change the audio or subtitle
language setting above. If you choose any other language, [---] will
be displayed instead. (3-letter abbreviation is written in bracket.)
INFORMATION
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
USEFUL TIPS
5261
5256
5255
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
F-H
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
O-R
CONNECTING DEVICES
Faroese
Fiji
Finnish [FIN]
French [FRE]
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish [POL]
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
OPERATING DVD
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
USING FUNCTIONS
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech [CZE]
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
Code
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian [NOR]
WATCHING TV
C-E
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
Language
PREPARATION
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Code
A-B
INTRODUCTION
Language Code List
27
28
OPERATING DVD
Unplayable Media
Playable Media
Media Type
Logo
Recorded
Signal
Media Size
DVD-VIDEO
DVD-RW
digital video
(MPEG2)
DVD-R
5 inches
(12 cm)
NEVER play back the following discs. Otherwise, malfunction
may result!
• 3 inches (8 cm) disc
• DVD-RAM
• DVD-audio
• CD-i
• Photo CD
• Video CD
• DVD with region codes other than 1 or ALL
• DTS-CD
• DVD-ROM for personal computers
• CD-ROM for personal computers
• The discs with labels, scratches, stains, blemishes, etc.
• HD DVD
• Blu-ray Disc
• DVD or CD contains MP3 / JPEG files
• KODAK Picture CD
On the following disc, the sound MAY NOT be heard.
• Super audio CD
Any other discs without compatibility indications
Note
CD-DA
CD-RW
digital audio
CD-R
Region Codes
This unit has been designed to play back DVD with
region 1. DVD must be labeled for ALL regions or
for region 1 in order to play back on the unit. You
cannot play back DVD that are labeled for other
regions. Look for the symbols on your DVD. If these
region symbols are not on your DVD, you cannot
play back the DVD in this unit.
The number inside the globe refers to region of the world.
A DVD labeled for a specific region can only be played back
on the unit with the same region code.
Color Systems
DVD is recorded in different color systems throughout the
world. The most common color system is NTSC (which is used
primarily in the United States and Canada).
This unit uses NTSC, so DVD you play back must be recorded
in the NTSC system. You cannot play back DVD recorded in
PAL color systems.
• Unfinalized discs cannot be played back.
• For DVD-RW/-R, discs recorded in the VR (video recording)
format cannot be played back. Only the finalized video format
discs can be played back.
• Some discs cannot be played back because of incompatible
recording conditions, characteristics of the recorder or special
properties of discs.
• Only the sound recorded on the normal CD layer can be
delivered. The sound recorded on the high density super audio
CD layer cannot be delivered.
• Do not use a single CD adaptor which makes 3 inches (8 cm) to
5 inches (12 cm) disc.
• You can play back discs with the marks listed in [Playable Media].
If you use non-standardized discs, this unit may not play them back
or the sound and video quality will be compromised.
• If the recorded portion of the disc is too small (less than 2.17
inches (55 mm) across), it may not play back properly.
English
Disc Menu
DVD
Some discs contain disc menus which describe the contents of the
disc or allow you to customize disc playback, or title menu which
lists the titles available on the DVD.
Playback
Turn on the amplifier and any other equipment which is
connected to this unit. Make sure the external audio receiver (not
included) are set to the correct channel.
Press
Note
to turn on the unit.
• Menu operations may vary depending on the disc.
Refer to the manual accompanying the disc for more details.
Insert a disc with label facing forward.
label
# CAUTION
3
5
The unit starts playback.
• If playback does not start automatically, press PLAY B
again.
Press STOP C to stop playback temporarily.
• If playback remains stopped for 20 minutes, the unit will
go into standby mode automatically when
[AUTO POWER OFF] is set to [ON].
Press EJECT A to eject the disc.
Note
Paused and Step-by-step Playback
Press PAUSE F during playback.
• Playback will be paused and sound will be muted.
DVD
Each time you press PAUSE F in the pause mode, the disc
goes forward one frame at a time.
To continue playback, press PLAY B.
Note
• Set [STILL MODE] to [FIELD] in the [OTHERS] menu if pictures
in the pause mode are blurred. ➠ p.26
Fast Forward / Fast Reverse
To continue playback, press PLAY B.
Note
• Set [STILL MODE] to [FIELD] in the [OTHERS] menu if pictures
in the fast playback mode are blurred. ➠ p.26
• Fast forward / fast reverse speed varies with disc. Approximate
speed is 1(2x), 2(8x), 3(20x), 4(50x) and 5(100x) on DVD and
1(2x), 2(8x) and 3(30x) on audio CD.
• For DVD, sound will be muted during this function.
• For audio CD, sound will be intermittent during the search.
INFORMATION
Press FWD D or REV E repeatedly during playback to
select the desired forward or reverse speed.
USEFUL TIPS
• [
] may appear at the top-right on the TV screen when the
operation is prohibited by the disc or this unit.
• Some DVD may start playback from title 2 or 3 due to specific
programs.
• During the playback of a 2-layered disc, pictures may stop for a
moment. This happens while the 1st layer is being switched to the
2nd layer. This is not a malfunction.
• When you cannot remove the disc, you may try either following
operations.
- Press and hold EJECT A on the unit for more than 5 seconds.
- Unplug the AC power cord and plug it in again, then press
EJECT A.
It will take about 10 seconds to eject the disc, while that the unit
will not respond to any key commands.
• To cancel resume, press STOP C one more time in the stop mode.
On some discs, STOP C will not work while the resume message
appears. Please wait until the message disappears.
• The resume information will be kept even when the unit goes
into standby mode. However, ejecting the disc will cancel the
resume feature. Playback will start at the beginning the next time
you insert the disc.
CONNECTING DEVICES
6
The unit switches to the DVD mode when the unit was in
TV mode and detects the type of disc.
• Press PLAY B if the unit does not go to the DVD mode.
Note
OPERATING DVD
4
• In case the DVD was recorded on both sides, make
sure the label of the side you want to play back is facing
forward.
Press STOP C during playback. Resume message will appear
on the TV screen.
Press PLAY B. Playback will resume from the point at which
playback was stopped.
USING FUNCTIONS
• Do not put coins or
foreign objects into
the disc loading slot.
Resume Playback
WATCHING TV
1
2
To display the DVD menu, press DISC MENU and use
▲/▼/◄/► to select an item, then press OK (or PLAY B).
To display the top menu, press TITLE and use
▲/▼/◄/► to select an item, then press OK (or PLAY B).
PREPARATION
Before you begin:
INTRODUCTION
These operations are accessible by remote control. Some
may also be accessible by controls on the main unit.
29
30
Slow Forward / Slow Reverse
DVD
Press FWD D or REV E repeatedly during the paused
mode to select the desired forward or reverse speed.
To continue playback, press PLAY B.
Note
• Set [STILL MODE] to [FIELD] in the [OTHERS] menu if pictures
in the slow playback mode are blurred. ➠ p.26
• Slow forward / slow reverse speed varies with disc. Approximate
speed is 1(1/16x), 2(1/8x) and 3(1/2x).
• The sound will be muted during this function.
Note
• Chapter, title or track search can only be performed during
playback or when the unit has kept the resume information. It
cannot be performed in the stop mode.
• The total number of chapters / titles / tracks in your disc; with
less than 10 chapters / titles / tracks, press the chapter / title / track
number directly. To play a double-digit chapter / title / track, press
the chapter / title / track number.
• Track search is not available for programmed or random playback.
Using SKIP H / G
1
During playback, press SKIP H / G repeatedly until a
desired chapter, title or track will be selected.
current chapter/track
(CH) (TR)
Zoom
CH/TR 1 CH/TR 2 CH/TR 3 CH/TR 4
[SKIP H]
DVD
[SKIP G]
current title
(TT)
or
TT 1
TT 2
TT 3
[SKIP H]
TT 4
[SKIP G]
The zoom function allows you to enlarge the video image and
to pan through the enlarged image.
2
1
During playback, press MODE repeatedly until
[
] appears.
• The picture becomes twice as large.
Note
Press OK repeatedly to change the zoom factor, [2x] or
[4x].
Time Search
Once a desired zoom factor is set, use ▲/▼/◄/► to slide
the zoomed picture across the TV screen.
You can select the desired time which the disc is played back
from.
2
3
4
To exit zoom, repeat steps 1 to 2 above and press OK
repeatedly until [OFF] appears.
Note
• The gray box with an inner blue box that shows during zoomed
playback is the position guide indicates the position of the zoomed
image within the overall image.
Position guide stays on the TV screen until you press OK.
Press OK one more time to recall the position guide when
disappears.
• Zoom function does not work while the disc menu is displayed.
• 4x zoom is not available on some discs.
• Zoom function is also available during pause mode.
Search Functions
Playback will start automatically from the chapter, title or
track you selected.
• SKIP H / G are not available when playback is stopped.
1
2
3
4
During playback, press MODE repeatedly until
[
]/[
] appears.
Use ▲/▼ repeatedly until [
] appears.
Press the Number buttons to select your desired time
lapse within 60 seconds.
Playback will start automatically from the time you selected.
Note
• When there is no need to enter a number, [0] appears
automatically. For example, [0: 0_: _ _] appears in the time search
menu if the total time of the title or track is less than 10 minutes.
• Press CLEAR to erase the incorrect input at step 3.
• Time search can only be performed during playback or when the
unit has kept the resume information.
It cannot be performed in the stop mode.
Chapter / Title / Track Search
Direct Search
You can select chapters, titles or tracks on the disc.
Press the Number buttons to select your desired chapter, title
or track.
1
2
3
During playback, press MODE repeatedly until
[
]/[
] appears.
• If you want to perform the title search, use
▲/▼ repeatedly until [
] appears.
Press the Number buttons to select your desired chapter,
title or track within 60 seconds.
To play back a single-digit chapter, title or track when
there are more than 10 chapters, titles or tracks, press
OK after entering the chapter, title or track number.
Playback will start automatically from the chapter, title or
track you selected.
Note
• To select a single-digit chapter, title or track number, press the
number directly.
• To select double digit chapter, title or track number:
- If the disc contains more than 9 and less than 100 chapter, title
or track, press +10 first, then enter the double digit chapter, title
or track number.
(e.g., for track 26, press +10, 2 and 6)
English
Random Playback
CD
Repeat function is available only during playback.
1
]
Press ▲/▼ to change the repeat mode.
DVD
OFF
CHAPTER
TITLE
repeat off
current chapter repeat
current title repeat
OFF
TRACK
ALL
3
repeat off
current track repeat
entire disc repeat
Press BACK to exit.
2
In stop mode, press MODE repeatedly until [RANDOM]
menu appears.
Press PLAY B to start random playback.
Note
• To repeat the current track in the random mode, follow the steps
1 and 2 in [Repeat Playback] and select [
TRACK]. ➠ p.31
• To repeat the entire random selections, follow the steps 1 and 2 in
[Repeat Playback] and select [
ALL]. ➠ p.31
Programmed Playback
Repeat A-B Playback
You can repeat playback between A and B on a disc.
1
1
2
Press OK at your desired ending point (B).
• Point B should be in the same title or track as point A.
• Within a few seconds, the section A-B will begin to play
back repeatedly.
To cancel repeat A-B playback, press MODE repeatedly
until [ A B ] appears.
Press OK so [OFF] appears.
Note
Press PLAY B to start programmed playback.
Note
INFORMATION
• Press CLEAR to erase the last track in the program if you make
an error.
• To erase all programmed tracks at once, select [ALL CLEAR] and
press OK at step 2.
• While a program is being played back, STOP C works as follows:
- Pressing STOP C once: The track will be in the resume standby
mode. Next time you press PLAY B, the playback will resume
from the point where it is stopped in the programmed playback.
- Pressing STOP C twice: Resume mode will be canceled. Next
time you press PLAY B, playback will restart from the first track
in the original order. However, your programmed playback can
be restarted when you follow the above steps. (Your programs
are still stored until either the disc is ejected or the unit goes into
standby mode.)
- On some discs, STOP C will not work while the resume message
appears. Please wait until the message disappears.
• To repeat the current track in the program, follow the steps 1 and
2 in [Repeat Playback] and select [TRACK]. ➠ p.31
• To repeat the entire program, follow the steps 1 and 2 in [Repeat
Playback] and select [ALL]. ➠ p.31
• Ejecting the disc or the unit goes into standby mode will erase the
program.
• You cannot use the Number buttons to select another track
during programmed playback. Use SKIP H / G to select other
tracks in the program.
• You cannot combine random playback with programmed playback.
• You cannot alter a programmed order during playback.
• You can start programmed playback only while in [PROGRAM]
menu.
USEFUL TIPS
• Repeat setting (except [ALL]) will be cleared when moving to
another title or chapter, track.
• During programmed playback, repeat setting will be effective for
the tracks in the program.
• Repeat playback or repeat A-B playback may not available with
some discs.
• Repeat A-B playback does not function during other repeat mode.
• To cancel point A, press CLEAR at step 2 in
[Repeat A-B Playback].
• Stopping playback will cancel repeat A-B playback.
3
CONNECTING DEVICES
4
Press OK at your desired starting point (A).
Use ▲/▼ to select a desired track, then press OK to
store.
• Additional tracks may be on other screens. Use ▲/▼
to go on to the next / previous pages.
• Repeat this step until you have selected all the tracks
you wish to play back in the program.
• Up to 99 tracks can be ordered.
• If 8 or more tracks were in a program, use
SKIP H / G to see all the tracks.
OPERATING DVD
2
3
During playback, press MODE repeatedly until
[ A B ] appears.
In stop mode, press MODE repeatedly until [PROGRAM]
menu appears.
USING FUNCTIONS
CD
You may determine the order in which tracks will play back.
WATCHING TV
CD
1
PREPARATION
2
During playback, press MODE repeatedly until [
appears.
This function shuffles the playing order of tracks instead of
playback in the sequence.
INTRODUCTION
Repeat Playback
31
32
On-screen Display
You can check the information about the current disc by
pressing INFO on the remote control.
remaining time of the current
chapter
appears only when multiangle is available on the DVD
current playback status
DVD
DVD
This unit allows you to select a subtitle language (if available)
during DVD playback.
1
2
11/16 0:00:00 - 0:03:30
elapsed time of the current
chapter
CH (Chapter):
current chapter number /
total chapters
1/3
Special Settings
Subtitle Language
T L1
current repeat setting appears only
when the repeat setting is active
C : Chapter repeat
T : Title repeat
A B : A-B repeat
bit rate indication for the amount
of audio and video data currently
being read
elapsed time of the current track
remaining time of the current
track
current playback status
CD
4/12 0:03:21 - 0:02:15
subtitles can be varied on the
displayed number
current subtitles language
3
4/12 0:13:45 - 0:45:40
T
ALL:
current track number / total tracks
current repeat setting appears
only when the repeat setting is
active
T : Track repeat
A : All tracks repeat
A B : A-B repeat
remaining time of the entire disc
elapsed time of the entire disc
Note
• When you are playing back an audio CD in program or random
mode, [
PROGRAM] (or [
RANDOM]) will be displayed
instead of 2 .
Each time you press ▲/▼, the subtitle language changes
as follows.
OFF
ENG
SPA
4
no subtitles
English audio
Spanish audio
Press BACK to exit.
Note
• To cancel the subtitle, select [OFF] at step 2.
• If your language is not shown after pressing
▲/▼ several times, the disc may not have that language. However,
some discs allow you to change subtitle languages setting in the
disc menu. (Operation varies depending on the disc, so refer to
the manual along with the disc.)
• When [NOT AVAILABLE] appears on the TV screen, it means no
subtitle is recorded on the scene.
• If you choose a language that has 3-letter-language code, the code
will be displayed every time you change the subtitle language
setting. If you choose any other languages, [---] will be displayed
instead. ➠ p.27
• Ejecting the disc will cancel your subtitle setting.
Audio Language
T
TR (Track):
current track number / total tracks
Use ▲/▼ repeatedly until your desired language appears.
1.ENG / 6 (SUBTITLE)
0:00:00 - 1:23:45
remaining time of the current title
elapsed time of the current title
TT (Title):
current title number / total titles
layer number, appears only when
playing a 2-layered disc
L0 : Layer 0 is playing
L1 : Layer 1 is playing
During playback, press MODE repeatedly until
[
] appears.
DVD
This unit allows you to select an audio language (if multiple
languages are available) during DVD playback.
1
During playback, press SAP/AUDIO repeatedly until the
desired language appears.
1.ENG Dolby D 3/2.1ch 48k/3
2
audio can be varied on the
displayed number
current audio language
Each time you press SAP/AUDIO, the audio language
changes as follows.
ENG
SPA
FRE
English audio
Spanish audio
French audio
33
English
STEREO
L-ch
R-ch
Stereo sound with left and right channels.
Left channel sound only.
Right channel sound only.
Virtual Surround
Camera Angles
You can enjoy virtual surround on your 2 channel stereo
system.
DVD
1
Use ▲/▼ repeatedly until your desired camera angle
appears.
1 / 8 (ANGLE)
angles can be varied on the
displayed number
Makes the dark areas brighter.
Shows the original picture as recorded.
Press BACK to exit.
Note
• The setting will be kept even if the unit goes into standby mode.
CD
This unit allows you to select a sound mode during CD
playback.
2
During playback, press SAP/AUDIO repeatedly until the
desired sound mode appears.
Each time you press SAP/AUDIO, the sound mode
changes as follows.
• The setting will be kept even if the unit is turned off.
• For audio CD, virtual surround will not be effective if the sound
mode is set to something other than [STEREO].
[Stereo Sound Mode]. ➠ p.33
• Turn down the level or select [OFF] if the sound is distorted.
To set a marker
1
2
3
4
5
During playback, press MODE repeatedly until
[
]/[
] appears.
Use ▲/▼ repeatedly until marker search menu appears.
Use ◄/► to select an available marker within 60 seconds.
When the playback reaches the point at which you want to
set a marker, press OK.
• Marker is now set.
Press BACK to exit.
To return to the marker later
1
2
Repeat steps 1-2 in [To set a marker]. Use ◄/► to select
the desired marker.
Press OK at the desired marker to restart playback from
the specific point which you set.
Note
• Marker search menu will disappear in about 60 seconds when
there is no input.
• You can mark up to 10 points.
• To clear a marker, select the marker to be cleared, and then press
CLEAR.
• Ejecting the disc or turning off the power will erase all markers.
• Selecting [
] at step 3 in the section [To set a marker] will
also erase all markers.
INFORMATION
Stereo Sound Mode
1
Note
USEFUL TIPS
3
]
Press ▲/▼ to adjust the black level.
ON
OFF
Press BACK to exit.
CONNECTING DEVICES
Adjust the black level to make the dark areas of the TV picture
brighter.
2
Natural effect.
Emphasized effect.
No effects (original sound).
This feature allows you to assign a specific point on a disc to
be called back later.
DVD
During playback, press MODE repeatedly until [
appears.
Press ▲/▼ to select the sound level.
1
2
OFF
3
]
Marker Setup
Press BACK to exit.
Black Level Setting
1
2
During playback, press MODE repeatedly until [
appears.
OPERATING DVD
3
]
1
USING FUNCTIONS
2
During playback, press MODE repeatedly until [
appears.
• Virtual surround cannot be changed when the sound mode is set
to either [L-ch] or [R-ch].
WATCHING TV
Some DVD may contain scenes which have been shot
simultaneously from various angles. You can change the camera
angle if [ ] appears on the screen. If [ANGLE ICON] is set
to [OFF] in [OTHERS] menu, [ ] will not appear. ➠ p.26
Note
PREPARATION
• Some discs will only allow you to change the audio setting from
the disc menu. Refer to the manual accompanying the discs for
details.
• If your language is not shown after pressing SAP/AUDIO several
times, the disc may not have that language.
However, some discs allow you to change multiple audio languages
setting in the disc menu. (Operation varies depending on the disc,
so refer to the manual along with the disc.)
• When [NOT AVAILABLE] appears on the TV screen, it means
audio language is not available.
INTRODUCTION
Note
34
CONNECTING DEVICES
No supplied cables are used with these connections:
• Please purchase the necessary cables at your local store.
Before you connect:
Be sure other device is connected properly before plugging in
the AC power cord.
External Device Connection
HDMI Connection
HDMI connection offers the highest picture quality.
HDMI (High-Definition Multimedia Interface) transports high definition
digital video and multi-channel digital audio through a single cable.
Blu-ray / DVD recorder
with the HDMI output jack
5
ELTIT
51 RETPAHC
B-A TAEPER
Note
• Use an HDMI cable with the HDMI logo (a certified HDMI cable).
High Speed HDMI cable is recommended for the better
compatibility.
For HDMI connection (use HDMI 1 or 2 Input jack)
• The unit accepts 480i, 480p, 720p, 1080i and 1080p 24/60 Hz of
video signals, and 32kHz, 44.1kHz and 48kHz of audio signals.
• This unit accepts 5.1 channel audio signal (Dolby Digital) and 2
channel audio signal (LPCM).
• This unit accepts only signals in compliance with EIA861.
For HDMI-DVI connection
• The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.
• HDMI-DVI connection requires separate audio connections as well
and the audio signals are converted from digital to analog.
• DVI does not display 480i image which is not in compliance with
EIA/CEA-861/861B.
Component Video Connection
Component Video connection offers better picture quality for
video devices connected to the unit.
If you connect to the unit’s Component Video Input jacks,
connect Analog Audio cables to the Analog Audio L/R Input
jacks for the Component Video connector jacks.
component video cables (red / blue / green)
audio cables
HDMI OUT
or
HDMI cable
(green) (blue) (red)
AUDIO OUT
L
R
COMPONENT VIDEO OUT
Y
Pb/Cb
Pr/Cr
TITLE
5
CHAPTER 15
REPEAT A-B
HDMI-DVI Connection
Use an HDMI-DVI conversion cable to connect the unit to
external video devices equipped with DVI output jack.
(Use HDMI 1 Input jack only and Audio L/R below HDMI 1
Input jack on rear of TV.)
cable receiver or satellite box
with the DVI output jack
AUDIO OUT
L
R
Note
• The unit accepts 480i / 480p / 720p and 1080i of video signals for
this connection.
S-Video Connection
STEREO
PCM
DVI OUT
Blu-ray / DVD recorderwith
the component video output jacks
audio cables
S-Video connection offers good picture quality for video
devices connected to the unit.
If you connect to the unit’s S-Video Input jack, connect audio
cables to the Audio L/R jacks right below the Composite Video
connector.
S-Video cable
To HDMI 1 Input
jack only
audio cables
S-VIDEO
OUT
AUDIO OUT
L
R
HDMI-DVI conversion cable
TITLE
5
CHAPTER 15
REPEAT A-B
Blu-ray/DVD recorder, camcorder and
VCR with the S-Video output jack
English
stereo system
AUDIO IN
L
R
PREPARATION
Composite Video connection offers standard picture quality
for video devices connected to the unit. If you connect to the
unit’s Composite Video Input jack, connect audio cables to
the Audio L/R Input jacks right below the Composite Video
connector jacks.
When the Audio is monaural, then only connect to the Audio
L Input jack.
INTRODUCTION
Composite Video Connection
35
video cable
audio cables
audio cables
AUDIO OUT
L
R
PC Connection
If you connect this unit to your PC, you can use this unit as a
PC monitor.
The unit can be connected to your PC that has a DVI terminal.
Use an HDMI-DVI conversion cable for this connection and it
requires stereo mini plug conversion cable as well.
video game
USING FUNCTIONS
camcorder
personal computer
STAND-BY
STEREO
WATCHING TV
VIDEO
OUT
VCR
mini audio cable
Note
DVI OUT
audio cables
Digital Audio Output Connection
To HDMI 1 Input
jack only
HDMI-DVI conversion
cable should be with
ferrite core.
HDMI-DVI conversion cable
The following video signals can be displayed:
Dolby Digital
decoder
WXGA
DIGITAL AUDIO
COAXIAL IN
Resolution
640 x
480
800 x
600
1,024 x
768
1,280 x
768
1,360 x
768
Refresh rate
60Hz
USEFUL TIPS
Format
VGA
SVGA
XGA
CONNECTING DEVICES
(for digital broadcasting and DVD functions only)
If you connect this unit to an external digital audio device, you
can enjoy multi-channel audio like 5.1ch digital broadcasting
sound.
Use a digital audio coaxial cable to connect the unit to
external digital audio devices.
OPERATING DVD
• If you connect to the S-Video Input jack and the Composite Video
Input jack at the same time, the S-Video connection will have
priority.
Other formats or non-standard signals will not be displayed
correctly.
Analog Audio Output Connection
(for both analog and digital broadcasting)
If you connect this unit to an external analog audio device, you
can enjoy stereo (2-channel) audio.
Use audio cables to connect the unit to external analog audio
devices.
• Please purchase the VGA cable or HDMI-DVI conversion cable
that has a ferrite core.
• The following operations may reduce noise.
- Attach a ferrite core to the AC power cord of your PC.
- Unplug the AC power cord and use the built-in battery of your
PC.
INFORMATION
Note
digital audio coaxial cable
36
USEFUL TIPS
Troubleshooting Guide
If the unit does not perform properly when operated as instructed in this manual,
check the following chart and all connections once before calling for service.
Symptom
Remedy
No power
•
•
Control button's do not work.
Power is ON but no screen image.
•
Make sure the AC power cord is plugged in.
Make sure that the AC outlet supplies the proper voltage, plug another electrical appliance into
the AC outlet to ensure that AC outlet operates normally.
If a power failure occurs, unplug the AC power cord for 1 minute to allow the unit to reset itself.
•
•
Press only one button at a time. Do NOT press more than one button at the same time.
Ensure that no buttons on the remote are depressed and move freely.
•
Check whether the connection of the antenna, cable receiver or satellite box is connected
correctly.
Check whether all the cables to the unit are connected to the correct output jack of your device
like Blu-ray / DVD recorder.
Make sure that the selected input mode is connected to the working input jack.
Check if your computer is NOT in sleep mode when the input mode of this unit is in PC mode.
Tap any key on the keyboard to wake up your computer.
•
•
•
•
•
•
•
•
No picture or sound
•
•
•
•
•
T
V
No color
•
•
Adjusted [Picture] or [Sound]
settings are not effective every time •
the unit is turned on.
Sound okay, picture poor
•
•
•
•
Picture okay, sound poor
You see a distorted picture or hear
an unusual sound.
•
•
•
•
Check if the power is on.
Check if the correct input mode is selected.
Check whether all the cables to the unit are connected to the correct output jack of your device
like Blu-ray / DVD recorder.
View other TV channels. The problem might be limited to the broadcasting station or weak signal
strength.
Unplug the AC power cord and wait for about 1 minute, then plug the AC power cord and turn
on the unit again.
Check whether the connection of the antenna, cable receiver or satellite box is connected
correctly.
Make sure that the selected input mode is connected to the working input jack.
Check if your computer is NOT in sleep mode when the input mode of this unit is in PC mode.
Tap any key on the keyboard to wake up your computer.
Make sure that the sound is not muted. Press MUTE so that the volume bar and current volume
level will appear on the TV screen.
Make sure that the volume is NOT set to [0] or [Mute]. If so, use VOL + / − to adjust the desired
volume.
View other TV channels. The problem might be limited to the broadcasting station or weak signal
strength.
Adjust [Color] in the main menu.
You must set [Home] in [Location]. ➠ p.24
Otherwise, the settings you adjusted will not be memorized after the unit goes into standby mode.
Electrical interference from nearby appliances may affect picture quality.
Adjust [Contrast] and [Brightness] in the main menu.
View other TV channels. The problem might be limited to the broadcasting station or weak signal
strength.
For the best picture quality, watch "High Definition" wide screen programs.
If the HD content is not available, watch "Standard Definition" programs instead.
View other TV channels. The problem might be limited to the broadcasting station or weak signal
strength.
Check if the audio cable is connected in correctly.
You may be getting interference from electrical appliances, automobiles, motorcycles or fluorescent
lights.
Try moving the unit to another location to see if this is the cause of the problem.
Ghosts, lines or streaks in picture
•
•
Electrical interference from nearby appliances may affect picture quality.
View other TV channels. The problem might be limited to the broadcasting station or weak signal
strength.
You see "noise" or "trash" on the
screen.
•
When the capabilities of the unit exceed the capabilities of the digital broadcasting, the signal will
be increased to match the capabilities of the display of the unit. This may cause noise or trash.
Different color marks on the TV
screen
•
View other TV channels. The problem might be limited to the broadcasting station, missing data or
pixelation.
You switch to a different input and
the volume changes.
•
•
This unit will memorize the volume level from the last time you adjusted it.
If the volume of the sound from another device is higher or lower, then the loudness will change.
English
37
INTRODUCTION
If you are watching TV or using the Composite Video, Component Video or HDMI with 480i Input,
press FORMAT repeatedly to switch various screen modes.
Captions are displayed as a white
T box. No caption is displayed in
the Closed Caption-supported
V program.
•
•
Interference from buildings or weather conditions may cause captioning to be incomplete.
Broadcasting station may shorten the program to insert advertisement.
The closed caption decoder cannot read the information of the shortened program.
•
The disc or cassette tape may be illegally copied, or the caption signal might not have been read
during copying.
Black box is displayed on the TV
screen.
•
The text mode is selected for caption. Select [CC-1], [CC-2], [CC-3], [CC-4] or [Off].
Completely distorted picture or
black/white picture with DVD.
•
Make sure the disc is compatible with the unit.
Picture freezes momentarily during
playback.
•
Check the disc for finger prints/scratches and clean with a soft cloth wiping from center to edge.
•
•
•
•
•
•
Clean the disc.
Ensure the disc is correctly inserted.
Check if the disc is defective by trying another disc.
Cancel the parental lock or change the control level.
Insert a correct disc that plays on this unit.
Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its
surface.
Buttons do not work or the unit
stops responding.
•
To completely reset the unit, unplug the AC power cord from the power outlet for 5-10 seconds.
The unit does not respond to
some operating commands during
playback.
•
Operations may not be permitted by the disc. Refer to the instructions of the disc.
•
The angle cannot be switched for DVD which do not contain multiple angles. In some cases
multiple angles are only recorded for specific scenes.
Playback does not start when the
title is selected.
•
Check the [PARENTAL] setting.
The password for rating level has
been forgotten.
•
Enter the default password (4737), then your forgotten password will be cleared.
No caption is displayed when
playing back a disc or a cassette
tape containing captions.
Disc cannot be played.
D
V
D
Angle does not switch.
USEFUL TIPS
Note
• The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fixed point of blue,
green or red.
This is not to be considered a defect in the LCD screen.
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual for more details on
correct operations.
• Some functions are prohibited on some discs.
CONNECTING DEVICES
•
OPERATING DVD
The display image does not cover
the entire screen.
USING FUNCTIONS
This unit will memorize the viewing mode from the last time you used the particular input modes.
WATCHING TV
Remedy
•
PREPARATION
Symptom
You switch to a different input and
the screen size changes.
INFORMATION
38
FAQ
Question
Answer
•
•
•
•
My remote control does not work. •
What should I do?
•
•
•
•
How come the Initial setup
appears every time I turn on this
unit?
Why can I not watch some RF
signal TV programs.
Check the antenna or cable connection to the main unit.
Check the batteries of the remote control.
Check if there is an obstacle between the infrared sensor window and the remote control.
p.39
Test the signal output use [IR Signal Check]
If okay, then possible infrared sensor trouble. ➠
Aim the remote control directly at the infrared sensor window on the front of the unit.
Reduce the distance to the unit.
Re-insert the batteries with their polarities (+/− signs) as indicated.
When there is an infrared-equipped device such as PC near this unit, it may interrupt the remote
control signal of this unit.
Move the infrared-equipped device away from this unit, change the angle of the infrared sensor or
turn off the infrared communication function.
•
•
Connect the RF coaxial cable to the unit directly and run the initial setup.
Make sure to complete the channel scan before the unit goes into standby mode.
•
•
Make sure [Autoprogram] has been completed. ➠ p.19
Autoprogram must be completed when you set up the unit for the first time or move it to a location
where previously unavailable channels are broadcast.
The selected channel may not be broadcasting.
When [Autoprogram] is interrupted and not completed, some channels will not be received. Make
sure to complete the Autoprogram. ➠ p.19
The selected channel cannot be viewed by the [Child Lock] setting. ➠ p.21
The unit requires some kind of antenna input. An indoor antenna (VHF / UHF), an external antenna
(VHF / UHF) or an RF coaxial cable from your wall cable/satellite box needs to be plugged into the
unit.
•
•
•
•
•
How come there is no image from •
the connected external devices?
•
Check if the correct input mode is selected by pressing SOURCE or using CH + / −.
[Switching Each Input Mode] ➠ p.14
Check the antenna or cable connection to the unit.
When using the Component Video Connection check that the Green (Y), Blue (Pb/Cb) and Red (Pr/
Cr) connectors are connected to their corresponding colored jacks on the unit.
•
Many digital channels have alternate channel numbers. The unit changes the numbers automatically to
the ones signifying the broadcasting station channel number. These basic numbers used for previous
analog broadcasts. (e.g., input ch#30 auto changes to ch#6.1)
•
•
•
My disc cannot be played back.
Is there any way I can play my disc? •
•
•
Clean the disc.
Ensure the disc is correctly inserted.
Check if the disc is defective by trying another disc.
Cancel the parental lock or change the control level.
Insert a correct disc that plays back on this unit.
Handle a disc with special care so that it does not have fingerprints, scratches or dusts on its surface.
•
Captions that are delayed a few seconds behind the actual dialog are common for live broadcasts.
Most captioning production companies can display a dialog to maximum of 220 words per minute. If
a dialog exceeds that rate, selective editing is used to insure that the captions remain up-to date with
the current TV screen dialog.
How can I set the clock ?
•
There is no clock function on this unit.
I cannot change the [Child Lock]
setting because my PIN code no
longer works.
•
If a Power failure occurs for longer than 10 seconds the child lock setting is retained, but the PIN code
is set to the default code “0000”. [Child Lock] ➠ p.21
When I enter a channel number, it
changes automatically.
Why are captions not displayed
entirely? Or, captions are delayed
behind the dialog.
English
Glossary
Maintenance
ATSC
Aspect Ratio
The width of a TV screen relative to its height. Conventional TVs are 4:3
(in other words, the TV screen is almost square); widescreen models
are 16:9 (the TV screen is almost twice as wide as its height).
Cabinet Cleaning
•
•
Panel Cleaning
Wipe the panel of the unit with a soft cloth. Before cleaning
the panel, disconnect the AC power cord.
Component Video
Disc Handling
Handle the discs so that fingerprints and dust do not adhere
to the surfaces of the discs.
Dolby Digital
The system developed by Dolby Laboratories to compress digital
sound. It offers stereo sound (2ch) or multi-channel audio.
HDMI (High-Definition Multimedia Interface)
HDTV (High Definition TV)
Ultimate digital format that produces high resolution and high picture
quality.
NTSC
PIN code
A stored 4-digit number that allows access to parental control features.
Region Code
SAP (Secondary Audio Program)
Second-audio channel delivered separately from main-audio channel.
This audio channel is used as an alternate in bilingual broadcasting.
SDTV (Standard Definition TV)
Standard digital format that is similar to the NTSC picture quality.
Offers higher quality images by delivering each signal, color (c) and
luminance (y) independently of each other through a single cable.
If the Laser Optical Pickup Unit is Dirty
If the unit still does not perform properly when it is operated,
while referring to the relevant sections and to [Troubleshooting
Guide] in this manual, the laser optical pickup unit may be
dirty. Consult your dealer or an Authorized Service Center for
inspection and cleaning of the laser optical pickup unit.
IR Signal Check
If the remote control is not working properly, you can use a
digital camera (including a cellular phone with built-in camera)
to see if it is sending out an infrared signal.
With a digital camera
(including built-in cell phone cameras):
Point the Digital Camera towards the remote
control infrared diode at the front of the
remote control. Press any button on the
remote control and look through the camera
display. If the infrared pulsating light appears
through the camera, the remote control is
sending out an IR signal.
INFORMATION
S-Video
Servicing
Should your unit become inoperative, do not try to correct
the problem yourself. There are no user serviceable parts
inside. Call our toll free customer support line found on the
cover of this manual to locate an authorized service center.
USEFUL TIPS
Regions associate discs and players with particular areas of the world.
This unit will only play back discs that have compatible region codes.
You can find the region code of your unit by looking on the rear panel.
Some discs are compatible with more than one region (or all regions).
•
•
•
•
•
Always store the disc in its protective case when it is not
used.
To clean-off, use a soft cloth.
Do not use a hard cloth since this will mar the disc.
Wipe the disc in a straight line form center to edge.
Never wipe with a circular motion.
Do not use detergent or abrasive cleaning agents.
CONNECTING DEVICES
Acronym that stands for National Television Systems Committee and
the name of analog broadcasting standards.
Off the air NTSC signals are no longer being sent by major
broadcasting stations in the USA.
•
OPERATING DVD
Interface that supports all uncompressed, digital audio / video formats
including set-top box, Blu-ray / DVD recorder or digital television, over
a single cable.
USING FUNCTIONS
This is a video signal format that conveys each of 3 principal colors
of light (red, blue and green) through different signal lines. This allows
the viewers to experience picture colors as original as it is. There are
several signal formats, including Y / Pb / Pr and Y / Cb / Cr.
WATCHING TV
CEC (Consumer Electronics Control)
This allows you to operate the linked functions between our brand
devices with CEC feature and this unit. We do not guarantee 100%
interoperability with other brands of CEC compliant devices.
Wipe the front panel and other exterior surfaces of the
unit with a soft cloth.
Never use a solvent or alcohol. Do not spray insecticide
liquid near the unit. Such chemicals may cause damage and
discoloration to the exposed surfaces.
PREPARATION
Acronym that stands for Advanced Television Systems Committee and
the name of the digital broadcasting standards.
INTRODUCTION
INFORMATION
39
40
General Specifications
TV
TV format
ATSC / NTSC-M TV standard
Closed Caption system
§15.122 / FCC (digital CC)
§15.119 / FCC (analog CC)
Channel coverage (ATSC / NTSC)
Terrestrial DTV (ATSC)
VHF 2~13
UHF 14~51 each channel has e.g.)
2.1~2.9, 3.1~3.9, etc.
Terrestrial Analog (NTSC)
VHF 2~13
UHF 14~69
CATV
2~13, A~W,
W+1~W+94 (analog W+1~W+84),
A-5~A-1, 5A
Tuning system
Channel frequency synthesized tuning
system
Channel access
Direct access keyboard,
Programmable scan, and up / down
DVD
Discs (playback compatibility)
DVD-video, DVD-RW/-R,
audio CD, CD-RW/-R
Frequency response
DVD (linear sound) 20 Hz to 20 kHz (sample rate: 48 kHz)
20 Hz to 44 kHz (sample rate: 96 kHz)
CD
20 Hz to 20 kHz
Signal-to-noise ratio (S/N ratio)
90 dB (JEITA)
CD
Total distortion factor
DVD
1 KHz 0.007% (JEITA)
CD
1 KHz 0.007% (JEITA)
Other Specifications
Terminals
Antenna Input VHF / UHF / CATV
Audio Input
RCA jack (L/R) x 6
Composite Video Input
RCA jack x 1
S-Video Input
Mini DIN 4 pin jack x 1
Component Video Input
RCA jack x 3
HDMI Input
HDMI 19 pin x 2
Digital Audio Output (coaxial)
RCA jack x 1
Analog Audio Output
RCA jack (L/R) x 2
1V p-p (75 Ω)
286 mV p-p (75Ω)
500 mV p-p (75 Ω)
500 mV rms
Digital encoded infrared light system
Operating temperature
41 °F (5 °C) to 104 °F (40 °C)
Power requirements
120V~ AC +/− 10 %, 60 Hz +/− 0.5 %
Power consumption (maximum)
150W
LCD
32 inches
Audio Output
(31.5 inches measured diagonally)
10W, 8 Ω x 2
[32MD311B ]
Dimensions <without base>
Width 30.0 inches (760.0 mm)
Height 20.5 inches (519.3 mm)
Depth 4.5 inches (114.0 mm)
Weight
•
Y
C
Remote control
Width 30.0 inches (760.0 mm)
Height 20.5 inches (519.3 mm)
Depth 5.1 inches (127.5 mm)
Designs and specifications are subject to change without
notice and without our legal obligation.
If there is a discrepancy between languages, the default
language will be English.
1V p-p (75 Ω)
Y
1V p-p (75 Ω)
Pb/Cb 700 mV p-p (75Ω)
Pr/Cr 700 mV p-p (75Ω)
Weight
19.63 lbs.
(8.90kg)
[32MD301B ]
Dimensions <without base>
•
75 Ω unbalanced (F-type)
500mV rms
19.85 lbs.
(9.00 kg)
<with base>
30.0 inches (760.0 mm)
22.2 inches (563.0 mm)
9.4 inches (238.0 mm)
20.73 lbs.
(9.40 kg)
<with base>
30.0 inches (760.0 mm)
22.2 inches (563.0 mm)
9.4 inches (238.0 mm)
20.95 lbs.
(9.50 kg)
English
WARRANTY COVERAGE:
This warranty obligation is limited to the terms as set forth
below.
to any hardware product or any software, even if packaged or
sold with the product, as manufacturers, suppliers, or publishers
may provide a separate warranty for their own products packaged with the bundled product.
TO OBTAIN ASSISTANCE…
Contact the Customer Care Center at:
1-866-341-3738
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
ON THIS PRODUCT IS LIMITED IN DURATION TO THE
DURATION OF THIS WARRANTY.
Some states do not allow the exclusions or limitation of incidental or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you.
FUNAI CORPORATION, Inc. 19900 Van Ness Avenue, Torrance, CA 90501
Printed in China
INFORMATION
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-supplied product,
(b) to damage caused by service performed by anyone other than
company approved Authorized Service Location, (c) to a product
USEFUL TIPS
The company is not liable for any damage to or loss of any programs, data, or other information stored on any media contained
within the product, or other additional product or part not covered by this warranty. Recovery or reinstallation of programs,
data or other information is not covered under this Limited
Warranty.
can be provided.
• Failure to operate per Owner’s Manual.
CONNECTING DEVICES
WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS:
This Limited Warranty applies only to new company manufac-
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
OPERATING DVD
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements
can result in delay.
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
USING FUNCTIONS
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
tent for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of the company.
• Damage or claims for products not being available for use, or
for lost data or lost software.
• Damage from mishandled shipments or transit accidents when
returning product.
WATCHING TV
WHAT IS COVERED:
This warranty covers new products if a defect in material or
workmanship occurs and a valid claim is received within the
Warranty Period. At its option, the company will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or serviceable used parts and is at least functionally equivalent or most
comparable to the original product in current inventory, or (3)
refund the original purchase price of the product.
Replacement products or parts provided under this warranty are
covered against defects in materials and workmanship from the
date of the replacement or repair for ninety (90) days or for the
remaining portion of the original product’s warranty, whichever
provides longer coverage for you. When a product or part is
exchanged, any replacement item becomes your property and the
replaced item becomes company property. When a refund is
given, your product becomes company property.
This Limited Warranty does not cover:
• Shipping charges to return defective product.
• Labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
• Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
PREPARATION
WHO IS COVERED:
This product warranty is issued to the original purchaser or the
person receiving the product as a gift against defects in materials
and workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
mission, or (d) if any serial number has been removed or defaced,
or (e) product, accessories or consumables sold “AS IS” without
warranty of any kind by including refurbished product sold “AS
IS” by some retailers.
INTRODUCTION
LIMITED WARRANTY
NINETY (90) DAY LABOR / ONE (1) YEAR PARTS
41