Measurement data monitoring system testo Saveris

We measure it.
Measurement data monitoring
system testo Saveris™
Automated and uninterrupted measurement data recording
°C
Flexible system set-up with wireless or Ethernet probes in
many probe versions
Extensive alarm management
Automatic creation of measurement data reports
Integration of other further measurement parameters via
standard interfaces
%RH
Saveris
testo Saveris™:
Easy, secure and efficient measurement
data montoring
The data monitoring system testo Saveris measures
In addition to this, transmitters of all measurement
temperature and humdity values in sensitive goods and
parameters with standard current/voltage interfaces can be
products, in the surroundings and in processes. The easily
integrated into the Saveris system. The integration not only
operated measurement system provides security as well as
of Testo transmitters, but also those of other manufacturers
savings of time and costs thanks to automated
is possible.
measurement data recording. The measurement data
All recorded data are centrally stored in a software. At the
transfer takes place by wireless and/or Ethernet connection
same time, the Saveris software also allows a
to a base station. This documents and monitors all
comprehensive analysis and evaluation of all recorded
measurement data. If limit values are exceeded, a number of
measurement data.
alarm options such as SMS/e-mail alarm or alarm relay are
available. Remote alarms can also be triggered even when
the system is not connected to a running PC.
Production
2
Storage
Building climate
We measure it.
+15
°C
+16
°C
3
Saveris
testo Saveris™ system overview
Data monitoring for uninterrupted control
testo Saveris™ wireless probes
testo Saveris™ Router
testo Saveris™ Converter
Probe versions with internal as well as
The use of a router can improve or
By connecting a testo Saveris
external temperature and humidity
extend the wireless connection in
converter to an Ethernet socket, the
sensors allow the adaptation to any
difficult constructional circumstances.
signal from a wireless probe can be
application. The wireless probes are
Several routers in the testo Saveris
converted into an Ethernet signal. This
available optionally with or without
system are of course possible. At the
combines the flexible installation of a
display. The current measurement
same time, the serial switching if up to
wireless probe with the exploitation of
data, the battery status and the quality
3 routers V 2.0 provides the highest
the existing Ethernet even over long
of the wireless connection are shown.
level of flexibility regarding wireless
transmission distances.
range.
testo Saveris™ Router
testo Saveris™ Converter V 2.0
Ethernet
testo Saveris™ wireless probes
testo Saveris™ Analog coupler (Ethernet)
testo Saveris™ Analog coupler (wireless)
Humidity transmitter
testo Saveris™ analog coupler
Humidity and differential pressure
The two versions of the analog coupler (wireless/Ethernet)
transmitters testo 6651/6681/6351/6381/6383
allow the integration of further measurement parameters
By integrating the humidity and differential pressure
into the testo Saveris monitoring system, by including all
transmitters, measurement data monitoring parallel to the
transmitters with standardized current/voltage interfaces,
control is possible. This offers the solution for highest
e.g. 4 to 20 mA or 0 to 10 V.
accuracy as well as for special applications, (high humidity,
trace humidity etc.) in compressed air, drying and air
4
conditioning technology.
Find out more at www. testo.com
We measure it.
testo Saveris™ Base
testo Saveris™ software
The base is the heart of testo Saveris, and can store 40,000
The testo Saveris software offers easy operation as well as
measurement values per measurement channel
an intuitive user interface. The Saveris software is available
independently of a PC. This corresponds to a storage
in three different versions: as a basic version SBE (Small
capacity of approximately a year at a measurement rate of
Business Edition), as a PROF version (professional) with
15 minutes. System data and alarms are visible via the
many additional options, or as a CFR version. The CFR
Saveris base display.
software fulfils the 21 CFR Part 11 requirements of the FDA,
and is thus validatable.
USB or Ethernet
Ethernet
testo Saveris™ Base
Ethernet
testo Saveris™ Ethernet probes
testo Saveris™ software
testo Saveris™ Ethernet probes
In addition to the wireless probes, probes can be used
which can be directly connected to the Ethernet. This
means that an existing LAN structure to be used, allowing
the data transfer from probe to base even over large
distances.
5
Saveris
Overview of application areas
for testo Saveris™
Monitoring processes in the pharmaceutical industry
Monitoring building climate
In the pharmaceutical industry, the recording and
Especially in museums and archives, stable ambient
monitoring of quality parameters is subject to strict
conditions are indispensable in the monitoring of building
requirements. Constant documentation during the
climate, in order to protect sensitive and valuable objects.
production and storage of temperature-sensitive products
testo Saveris automates the central recording of all ambient
such as medicines, blood products or cell cultures has long
data.
been considered a "must".
testo Saveris automates central documentation as well as
Saveris protects valuable inventory at all times from
safe monitoring in refrigerated or deep-freeze rooms,
undesired temperature or humidity influences. The wireless
incubators and climate cabinets. testo Saveris thus offers
probes can be flexibly installed at the measurement sites
optimum control in critical processes. The comprehensive
without complicated wiring.
alarm management allows fast alarms if limit values are
exceeded. Thanks to the combination of wireless and/or
Ethernet probes, the system concept is ideal for many
different applications in the pharmaceutical industry. The
data monitoring system testo Saveris of course complies
with the requirements of 21 CFR Part 11 and is thus
validatable.
6
Thanks to the alarms when limit values are exceeded, testo
We measure it.
Monitoring of processes in research and
development, laboratories and hospitals
Research and development areas as well as laboratories
testo Saveris thus guarantees the easy and safe monitoring
and hospitals are responsible for the recording of ambient
of ambient and process data in climate cabinets,
and process data, in order to monitor sensitive products or
refrigerators, incubators, test benches or blood banks. At
machines. testo Saveris takes over the central
the same the Saveris software also allows a comprehensive
documentation of the measurement series.
analysis and evaluation of all recorded measurement data.
7
Saveris
Overview of application areas
for testo Saveris™
Monitoring the food cold chain
The maintenance of pre-defined temperature values is
Monitoring in production, quality control and storage
in industry
crucial for quality in food production, and important for the
A number of quality data must be recorded and monitored
fulfilment of legal hygiene standards.The deciding factor.
in production, quality control and storage in industry. testo
however, is the uninterrupted maintenance of the cold chain
Saveris automates the documentation of these data and
during production and storage. In the final analysis, only
provides alarms when upper or lower limit values are
this uninterrupted monitoring guarantees an evaluation of
exceeded. The quality of the products and processes is thus
the quality and freshness of the products. testo Saveris
guaranteed at a stable level.
automates not only the monitoring of the ambient and
product temperatures during production but also the
maintenance of defined temperature limit values during
storage. Alarms are of course immediately triggered when
testo Saveris is ideally applicable for the monitoring and
documentation of ambient and temperature data in
production areas, in storerooms, refrigerators and climate
cabinets.
limit values are exceeded.
The most diverse applications are optimally covered by
The measurement data are stored centrally in a database,
and are available at any time. All measurement values are
thus under control! It goes without saying that testo Saveris
complies with the EN12830 standard.
8
testo Saveris wireless and/or Ethernet probes.
We measure it.
9
Saveris
testo Saveris™ software
1
Installation made easy
· Connect Saveris base to mains. The probes can now be logged on at
the base: They are switched on in series and automatically identified by
the base.
· The Saveris base is connected to the PC via USB or Ethernet. The software is installed on the PC with help from the installation wizard.
· The system is ready for configuration: Probe name, limit values, measuring cycles and alarms can be adapted to the individual measuring
tasks.
2
Clear and always up-to-date
· The measurement data can always be shown as a graph or table.
· Various probes can be compiled into groups. Logical units by measurement task are thus formed.
· The measurement data view over days, weeks or months is freely definable. The integrated calendar offers practical assistance here.
3
Automated documentation
Daily report
Cold storage house zone: Hourly mean values on 03.08.2007
Time
°C freezer 1
%RH cold room 1
°C refrigerator
°C beverages
°C freezer 2
°C freezer 3
°C freezer 4
· Format and time of the report creation are predefined once.
· The creation and saving of reports as a PDF file now takes place automatically in accordance with the set conditions. The files are therefore
ready to be printed at any time.
10
Total maximum value
Total mean value
Total minimum value
We measure it.
Small Business Edition (SBE), Professional (PROF)
and CFR-Version
4
Even more flexible with Professional software
The PROF (Professional) software version offers interesting additional
functions beyond the attractive standard functions of the basic version
SBE, e.g.:
21 °C
48 %RH
· Client-server concept: the measurement data can be monitored from
different PC's integrated into network.
· Photos of machines or rooms can be stored as images. On these, the
respective measurement values are presented directly in the position of
the probe in the room or at the machine. The link between
measurement site and measurement value is thus visualized very easily
(fig. 4)
· A comprehensive alarm management offers the possibility or alarming
more than two people simultaneously or consecutively. Depending on
the day of the week and/or time, alarms by e-mail or SMS can be freely
selected.
26 °C
38 %RH
41 °C
22 %RH
5
Validatable CFR software
The CFR software fulfils the requirements of the FDA’s 21 CFR Part 11 and is
thus validatable.
Overview of software functions
SBE
Diagrams / tables / alarm overview / PDF reports
Calendar management
Presentation of probe groups
Alarm dispatch (e-mail, SMS, relay)
•
•
•
•
Comprehensive alarm management
Automatic refresh of measurement data ("online mode")
Measurement data on background photo of measurement sites
Integration in network (client server)
Allocation of access rights for probe groups
Compliant with 21 CFR Part 11 (validatable)
Electronic signature
Audit Trail for traceability of user activities
Allocation of access rights on 3 user levels
PROF CFR
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Software versions
SBE software, incl. USB connecting cable base-PC
Part no. 0572 0180
PROF software, incl. USB connecting cable base-PC
Part no. 0572 0181
CFR software, incl. Ethernet connection cable base to PC
Part no. 0572 0182
11
Saveris
testo Saveris™ Base
The base is the heart of testo Saveris and can save 40,000
readings per measurement channel independently of the
PC. The system data and alarms are visible via the display
of the Saveris base.
Display for showing alarms and system data
Large data memory
Issue of alarms via LED/relay
SMS alarm (optional)
Emergency battery integrated
Up to 150 probes can be connected
Connection option via USB or Ethernet
12
Memory
40,000 values per channel
(total max. 18,000,000 values)
Dimensions
Weight
Protection class
Material/Housing
Radio frequency
Power supply (absolutely necessary)
225 x 150 x 49 mm
Approx. 1510 g
IP42
Diecast zinc / plastic
2.4 GHz
6.3 V DC mains unit; alternatively via 24 V AC/DC
plug-in/screw terminals, power consumption 4 W
Rech. batt.*
Li-ion battery (for data back-up and for emergency SMS if power supply fails)
Oper. temp.
Storage temp.
Display
Interfaces
Connectable radio
probe
-10 to +50 °C
-40 to +60 °C
graphical display, 4 control keys
USB, radio, Ethernet
max. 15 probes can be directly connected via wireless interface, max. 150 total via wireless / Router /
Converter / Ethernet / Extender, max. 450 channels
Alarm relay
max. 1 A, max. 30 W, max. 60/25 V DC/AC,
NC or NO contact
GSM module
850 / 900 / 1800 / 1900 MHz
not valid for Japan and South Korea
Set up
Table base and wall bracket included
Firmware version
*Wearing part
2.X
Saveris base, radio frequency
2,4 GHz
Part no.
0572 0260
2.4 GHz
Ordering data
2.4 GHz
Technical data
Saveris base, radio frequency
2,4 GHz, GSM module integrated (for SMS alarm)
Part no.
0572 0261
No mains units or aerials with magnetic base are contained in this ordering data.
Note on the radio frequencies
2.4 GHz: non-EU countries
We measure it.
testo Saveris™ components:
Router, Converter and Extender
The use of a router can improve or extend the wireless connection in difficult constructional circumstances. Several routers
in the testo Saveris system are of course possible. At the same time, the serial switching if up to 3 routers V 2.0 provides the
highest level of flexibility regarding wireless range.
By connecting a testo Saveris converter to an Ethernet socket, the signal from a wireless probe can be converted into an
Ethernet signal. This combines the flexible installation of a wireless probe with the exploitation of the existing Ethernet even
over long transmission distances.
Radio
Radio
Radio
Radio
Ethernet
Ethernet
Saveris router V 1.0
Saveris Router V 2.0
Saveris converter V 1.0
Saveris Converter V 2.0
Application
· for Saveris Base Firmware
Version V 1.X
· for Saveris Base Firmware
Version V 2.X
· for Saveris Base Firmware
Version V 1.X
· only for wireless probes
Firmware Version 1.X
· for all Saveris Base Firmware
versions
· only for wireless probes with
Firmware Version 2.X
Dimensions
Weight
Power supply
Approx. 85 x 100 x 38 mm
Approx. 180 g
Approx. 190 g
6.3 V DC mains unit; alternatively via 24 V AC/DC plug-in/screw
6.3 V DC mains unit; alternatively via 24 V AC/DC plug-in/screw
terminals, power consumption 〈 0.5 W
terminals, PoE, power consumption 〈 2 W
Oper. temp.
Storage temp.
Material/Housing
Protection class
Interfaces
Connectable radio probe
Router cascading
Wall bracket
-20 to +50 °C
-40 to +60 °C
Plastic
IP54
Radio
max. 5
no
Radio, Ethernet
max. 15
-
yes
-
included
2.4 GHz
Versions
Saveris Router V1.0, 2.4 GHz,
radio transmission medium
Saveris Router V2.0, 2.4 GHz,
radio transmission medium
Saveris-Converter V 1.0, 2.4 GHz,
converts the radio transmission
medium to Ethernet
Saveris-Converter V 2.0, 2.4 GHz,
converts the radio transmission
medium to Ethernet
Part no.
0572 0159
Part no.
0572 0259
Part no.
0572 0158
Part no.
0572 0258
No mains units are contained in this ordering data.
13
Saveris
testo Saveris™ components:
Radio probes
Probe versions with internal and external temperature sensors and with humidity sensors allow the adaptation to every application. The radio probes are available with or without a display as an option. Current measurement data, the battery status
and the quality of the radio link are shown in the display.
°C / °F
Radio
Pt
100
internal
internal
external
external
external
Saveris T2
Saveris T1
Saveris Pt
Saveris T3
External probe
Internal sensor
Radio probe with internal NTC Radio probe with external
2-channel radio probe with 2
probe connection and internal external TC probe connections
NTC, door contact
(Choice of TC characteristics)
Probe type
NTC
NTC
Meas. range
Accuracy
-35 to +50 °C
±0.4 °C (-25 to +50 °C)
±0.8 °C (remaining range)
-35 to +50 °C
±0.4 °C (-25 to +50 °C)
±0.8 °C (remaining range)
Resolution
Probe type
Meas. range
(Instrument)
0.1 °C
0.1 °C
NTC
-50 to +150 °C
–
Accuracy
(Instrument)
–
–
–
Resolution (Instrument)
Connection
TC type K
TC type J
-195 to +1350 °C
-100 to +750 °C
TC type T
TC type S
-200 to +400 °C
0 to +1760 °C
–
Pt100
-200 to +600 °C
at +25 °C
±0.1 °C (0 to +60 °C)
±0.2 °C (-100 to +200 °C)
±0.5 °C (remaining range)
0.1 °C
NTC via mini-DIN socket,
door contact connection
cable included in delivery
(1.80 m)
0.1 °C / TC type S 1 °C
2 TCs via TC socket, max. difference in potential 2 V
0.01 °C
1 Pt100 via mini-DIN sokket
Plastic
IP68
IP54
2.4 GHz
Standard 15 min, 1 min to 24 h can be set
6,000 measurement values per channel
IP68
DIN EN 12830
-35 to +50 °C
Oper. temp.
Storage temp.
Display (optional)
Transmission distance
Wall bracket
2.4 GHz
–
Battery life at +25 °C, 3 years; for freezer applications, 3 years with L91 Photo lithium Energizer batteries
Conformity with standards
14
–
80 x 85 x 38 mm
Approx. 240 g
Material/Housing
Protection class
Radio frequency
Measuring rate
Memory
Version with
display
–
±0.5 °C or 0.5% of mv
Dimensions (housing):
Versions
Version
without
display
–
–
±0.2 °C (-25 to +70 °C)
±0.4 °C (remaining
range)
Weight
Battery life
(Type: 4 AA batteries)
Radio probe with 1 external
Pt100 probe connection
–
–
–
81 mm
TC
81 mm
NTC
81 mm
NTC
81 mm
NTC
–
-20 to +50 °C
-40 to +55 °C (incl. batteries)
LCD, 2 lines; 7-segment with symbols
approx. 100 m w/o obstruction at frequency 2.4 GHz
included
Saveris T1
Part no.
0572 1250 *
Saveris T2
Part no.
0572 1251 *
Saveris T3
Part no.
0572 9252 *
Saveris Pt
Part no.
0572 7251 *
Saveris T1 D
Saveris T2 D
Saveris T3 D
Saveris Pt D
Part no.
0572 1260 *
Part no.
0572 1261 *
Part no.
0572 9262 *
Part no.
0572 7261 *
The alkali manganese batteries AA (0515 0414) are included in these ordering data (analog coupler excluded). Saveris probes are delivered with a calibration protocol of the factory adjustment
data. Calibration certificates must be ordered separately.
* The Saveris Converter V 2.0 (order no. 0572 0258) is required for integration of Saveris wireless probes into systems with Base firmware V 1.X . For more information please contact our customer hotline or your Testo partner.
We measure it.
mA and V
°C / °F and %RH
Radio
%RH NTC
%RH NTC
%RH NTC
external
internal
external
Internal sensor
External probe
internal
Saveris H3
Saveris H4D
Saveris U1
Wireless humidity probe
Humidity radio probe
Wireless probe with 1 external
humidity probe connection
Wirelss probe with current/
voltage output
–
Meas. range
–
Accuracy
NTC
Humidity sensor
-20 to +50 0 to 100
°C
%RH1)
±0.5 °C
NTC
–
Humidity sensor
Meas. range
(Instrument)
-20 to +50 °C 0 to +100 %RH 1)
Accuracy
(Instrument)
±0.5 °C
Resolution (Instrument) 0.1 °C
1 channel: current/voltage
input
2-wire: 4 to 20 mA, 4-wire: 0/4
to 20 mA, 0 to 1/5/10 V, load:
max. 160 Ω at 24 V DC
–
–
±3 %RH at +25 °C
±0,03 %RH/K
±1 digit
–
Connection
V
Saveris H2D
Probe type
Resolution
Probe type
mA
Current ±0.03 mA / 0.75 μA
Voltage 0 to 1 V ±1.5 mV/39 μV
Voltage 0 to 5 V ±7.5 mV / 0.17 mV
Voltage 0 to 10 V ±15 mV / 0.34 mV
±0.02% of. m.v./K deviating from nominal temperature 22 °C
–
0.1 °C
0.1 °C% / 0.1 °C td
–
–
to 90 %RH: ±2 %RH at +25 °C
> 90 %RH: ±3 %RH at +25 °C
±0,03 %RH/K
±1 digit
–
NTC
-20 to +70 °C
Humidity sensor
0 to +100 %RH 1)
±0.2 °C
see probes
–
0.1% / 0.1 °C td
–
–
–
–
non-exchangeable
stump probe
–
–
0.1% / 0.1 °C td
0.1 °C
–
1 x external humidity probe 2 or 4-wire current/
mini DIN socket
voltage output
Service interface mini DIN for
adjustment
Dimensions (housing):
Weight
Battery life
(Type: 4 AA batteries)
Material/Housing
Protection class
Radio frequency
Measuring rate
Memory
Oper. temp.
Storage temp.
Display (optional)
Transmission distance
Wall bracket
80 x 85 x 38 mm
85 x 100 x 38 mm
Approx. 85 x 100 x 38 mm
Approx. 245 g
Approx. 240 g
Approx. 256 g
Battery life at +25 °C, 3 years; for freezer applications, 3 years with L91 Photo lithium Energizer Supply: Mains unit 6.3 V DC,
20 to 30 V DC max. 25 V AC
batteries
Plastic
IP42
IP54
IP54
2.4 GHz
Standard 15 min, 1 min to 24 h can be set
6,000 measurement values per channel
-20 to +50 °C
-40 to +55 °C (incl. batteries)
LCD, 2 lines; 7-segment with symbols
(no display)
approx. 100 m w/o obstruction at frequency 2.4 GHz
included
2.4 GHz
Versions
Version without
display
Version with
display
Saveris H3
Part no.
0572 6250 *
Saveris H2D
Part no.
0572 6262 *
Saveris H3 D
Part no.
0572 6260 *
Saveris U1
Part no.
0572 3250 *
Saveris H4D
Part no.
0572 6264 *
The alkali manganese batteries AA (0515 0414) are included in these ordering data (analog coupler excluded). Saveris probes are delivered with a calibration protocol of the factory adjustment
data. Calibration certificates must be ordered separately.
1) Not for condensing atmosphere. For continuous applications in high humidity (>80 %RH at ≤30 °C for >12 h, >60 %RH at >30 °C for >12h), please contact us via www.testo.com.
* The Saveris Converter V 2.0 (order no. 0572 0258) is required for integration of Saveris wireless probes into systems with Base firmware V 1.X . For more information please contact our customer hotline or your Testo partner.
15
Saveris
testo Saveris™ components:
Ethernet probes
The existing LAN infrastructure can be used through the Ethernet probe. This allows the data transfer from the probe to the
base, even over long distances. Ethernet probes have a display.
°C
NTC
TC
Pt
100
external
external
external
Saveris T1E
Saveris T4 E
Saveris Pt E
Ethernet probe with 1 external
probe connection NTC
4-channel Ethernet probe with 4 external
TC probe connections
Ethernet probe with external Pt100
probe connection
NTC
-50 to +150 °C
TC type K
TC type J
-195 to +1350 °C
-100 to +750 °C
Pt100
-200 to +600 °C
TC type T
TC type S
-200 to +400 °C
0 to +1760 °C
External probe
Ethernet
Probe type
Meas. range
(Instrument)
Accuracy
(Instrument)
±0.2 °C (-25 to +70 °C)
±0.4 °C (remaining range)
±0.5 °C or 0.5% of mv
Resolution (Instrument)
Connection
0.1 °C
1 x NTC via mini DIN socket
0.1 °C / TC type S 1 °C
0.01 °C
4 TCs via TC socket, max. difference in po- 1 Pt100 via mini-DIN socket
tential 50 V
Dimensions (housing):
Weight
Power
Buffer battery
Material/Housing
Protection class
Measuring rate
Memory
Oper. temp.
Storage temp.
Power consumption
Display (optional)
Wall bracket
Versions
Mini-DIN service interface for adjustment is accessible externally
Approx. 85 x 100 x 38 mm
Approx. 220 g
6.3 V DC mains unit; alternatively via 24 V AC/DC plug-in/screw terminals, PoE
Li-ion (wearing part)
Plastic
IP54
2 s to 24 h
6,000 measurement values per channel
-20 to +60 °C
-40 to +60 °C
PoE Class 0 (typical ≤ 3 W)
LCD, 2 lines; 7-segment with symbols
included
Saveris T1E with display
Saveris T4 E with display
Saveris Pt E with display
Part no.
0572 1191
Part no.
0572 9194
at +25 °C
±0.1 °C (0 to +60 °C)
±0.2 °C (-100 to +200 °C)
±0.5 °C (remaining range)
Part no.
0572 7191
Saveris probes are delivered with a calibration protocol of the factory adjustment data. Calibration certificates must be ordered separately. Mains units are not included in delivery.
16
We measure it.
mA and V
°C / °F and %RH
%RH NTC
%RH NTC
%RH NTC
external
external
external
Saveris H1 E
Saveris H2 E
Saveris H4E
Saveris U1E
Humidity Ethernet
probe 1%
Humidity Ethernet
probe 2 %
Ethernet probe with external
humidity probe connection
Ethernet probe with
current/voltage
mA
V
internal
Internal sensor
Ethernet
Probe type
1 channel: current/voltage
Meas. range
2-wire: 4 to 20 mA, 4-wire: 0/4 to 20
mA, 0 to 1/5/10V, load: max. 160 Ω at
24 V DC
Probe type
External probe
Current ±0,03 mA / 0.75 μA
Voltage 0 to 1 V ±1.5 mV / 39 μV
Voltage 0 to 5 V ±7.5 mV / 0.17 mV
Voltage 0 to 10 V ±15 mV / 0.34 mV
±0.02% of. m.v./K deviating from nominal
temperature 22 °C
Accuracy
NTC
Meas. range (Instrument) -20 to +70 °C
Accuracy
(Instrument)
0 to 100 %RH1)
to 90 %RH: ±1
±0.2 °C (0 to +30 °C) %RH +0,7 % of mv
±0.5 °C (remaining
at +25 °C
range)
> 90 %RH: ±1,4
%RH +0,7 % of mv
±0,03 %RH/K
± 1 digit
Resolution (Instrument) 0.1 °C
Humidity sensor
–
-20 to +70 °C 0 to 100 %RH1) -20 to +70 °C 0 to 100 %RH1)
–
Humidity sensor NTC
0.1% / 0.1 °C td
Connection
±0.5 °C
0.1 °C
Humidity sensor NTC
to 90 %RH: ±2
%RH at +25 °C
> 90 %RH: ±3
%RH at +25 °C
±0,03 %RH/K
± 1 digit
0.1% / 0.1 °C td
±0.2 °C
see external
probes
–
0.1 °C
0.1% / 0.1 °C td
1 x external Ethernet humidity probe mini DIN socket
–
–
1 x 2- or 4-wire current/voltage
Mini-DIN service interface is accessible externally
Approx. 85 x 100 x 38 mm
Approx. 254 g
Approx. 230 g
6.3 V DC mains unit; alternatively via 24 V AC/DC plug-in/screw terminals, PoE
Li-ion (wearing part)
Dimensions (housing):
Weight
Power
Buffer battery
Plastic
IP54
2 s to 24 h
6,000 measurement values per channel
-20 to +60 °C
Material/Housing
Protection class
Measuring rate
Memory
Oper. temp.
Storage temp.
Power consumption
Display (optional)
Wall bracket
Versions
Approx. 240 g
-40 to +60 °C
PoE Class 0 (typical ≤ 3 W)
LCD, 2 lines; 7-segment with symbols
included
Saveris H1 E with display
Part no.
0572 6191
Saveris H2 E with display
Part no.
0572 6192
Saveris H4E with display
Part no.
0572 6194
no display
Saveris U1E no display
Part no.
0572 3190
Saveris probes are delivered with a calibration protocol of the factory adjustment data. Calibration certificates must be ordered separately. Mains units are not included in delivery.
1) Not for condensing atmosphere. For continuous applications in high humidity (>80 %RH at ≤30 °C for >12 h, >60 %RH at >30 °C for >12h), please contact us via www.testo.com.
Sintered caps for Saveris H1 E, H2 E and H2 D probes
Part no.
Metal protection cage, Ø 12 mm for humidity probes, for measurement in flow velocities of less than 10 m/s
0554 0755
Stainless steel sintered filter, pore size 100 μm, sensor protection in dusty atmospheres or higher flow velocities, for
measurements at higher flow velocities or in contaminated air
0554 0647
Cap with wire mesh filter, Ø 12 mm
0554 0757
Sintered PTFE filter, Ø 12 mm, for corrosive media, High humidity range (long-term measurements), high flow velocities.
0554 0756
Testo saline pots for testing and humidity calibration of humidity sensors, 11.3 %RH and 75.3 %RH, incl. adapter for
humidity probes, fast testing or calibration of humidity probe
0554 0660
17
Saveris
testo Saveris™ accessories:
External temperature and humidity probes
Pt
100
Plug-in probes
Illustration
Robust, Pt100 stainless steel food
probe (IP65)
125 mm
15 mm
Measuring
range
Accuracy
t99
Part no.
-50 to +400 °C
Class A (-50 to
+300 °C), Class
B (remaining
range)
10 s
0609 2272
-85 to +150 °C
Class A
Ø 4 mm
Ø 3 mm
Connection: Fixed cable
Penetration probe Pt100 with ribbon
cable, cable length 2 m, IP 54
60 mm
30 mm
Ø 5 mm
Ø 3.6 mm
35 s
Connection cable for unlimited Pt100 stationary probes (4-wire technology), Cable length: 3 m
possible max. cable length: 20 m
TC
Plug-in probes
Measuring
range
Illustration
Stationary probe with stainless
steel sleeve, TC Type K
40 mm
0.00
0572 7001
0554 0213
Accuracy
t99
Part no.
-50 to +205 °C
Class 2*
20 s
0628 7533
-40 to + 220 °C
Class 1
7s
0572 9001
-50 to +170 °C
Class 2*
150
s
0602 4792
-50 to +400 °C
Class 2*
-60 to +130 °C
Class 2*
5s
0602 4592
-50 to +120 °C
Class 1*
90 s
0628 0020
-50 to +400 °C
Class 2*
5s
0602 0644
-50 to +400 °C
Class 2*
5s
0602 0645
-50 to +250 °C
Class 2*
5s
0602 0646
-200 to +1000
°C
Class 1*
5s
0602 5792
-200 to
+1300 °C
Class 1*
4s
0602 5693
Ø 6 mm
Connection: Fixed cable 1.9 m
Magnetic probe, adhesive force approx. 20 N, with magnets, for measurements on metal surfaces, TC Type K
Magnetic probe, adhesive force approx. 10 N, with magnets, for higher
temp., for measurements on metal
surfaces, TC Type K
Pipe wrap probe for pipe diameter 5
to 65 mm, with exchangeable measuring head. Meas. range short-term to
+280°C, TC Type K
Pipe wrap probe with velcro strip; for
temperature measurement on pipes
with diameter up to max. 120 mm;
Tmax. +120 °C; TC Type K
Thermocouple with TC adapter,
flexible, 800mm long, fibre glass,
TC Type K
Thermocouple with TC adapter,
flexible, 1500mm long, fibre glass,
TC Type K
Thermocouple with TC adapter,
flexible, 1500mm long, PTFE, TC
Type K
Immersion tip, flexible, TC Type K
60 mm
30 mm
Ø 5 mm
Ø 3.6 mm
35 mm
Ø 20 mm
Fixed cable
75 mm
0602 4892
Ø 21 mm
Connection: Fixed cable 1.6 m
Connection: Fixed cable 1.2 m
395 mm
Connection: Fixed cable 1.5 m
800 mm
20 mm
Penetration probe TC with ribbon
cable, Type K, cable length 2 m, IP 54
Ø 1.5 mm
1500 mm
Ø 1.5 mm
1500 mm
Ø 1.5 mm
500 mm
Ø 1.5 mm
Immersion measurement tip, flexible,
for measurements in air/exhaust
gases (not suitable for measurements in smelters), TC Type K
18
The specified accuracy class of the Saveris
radio and Ethernet probe is achieved using
these external probes.
1000 mm
Ø 3 mm
*According to standard EN 60584-2, the accuracy of Class 1 refers to -40 to +1000 °C
(Type K), Class 2 to -40 to +1200 °C (Type K), Class 3 to -200 to +40 °C (Type K).
We measure it.
NTC Plug-in probes
Illustration
Stub probe, IP 54
35 mm
Measuring
range
Accuracy
t99
-20 to +70 °C
±0.2 °C (-20 to +40 °C)
±0.4 °C (+40.1 to +70 °C)
15 s
0628 7510
-30 to +90 °C
±0.2 °C (0 to +70 °C)
±0.5 °C (remaining range)
190
s
0628 7503*
-35 to +80 °C
±0.2 °C (-25 to +74.9 °C)
±0.4 °C (remaining range)
5s
0610 1725*
-35 to +80 °C
±0.2 °C (-25 to +74.9 °C)
±0.4 °C (remaining range)
5s
0628 0006*
-40 to +125 °C
±0.5 % of mv (+100 to +125
°C)
±0.2 °C (-25 to +80 °C)
±0.4 °C (remaining range)
8s
0572 1001
-50 to +80 °C
±0.2 °C (0 to +70 °C)
20 s
0628 7507
8s
0613 2211*
Part no.
Ø 3 mm
Stationary probe with aluminium
sleeve, IP 65
40 mm
Ø 6 mm
Connection: Fixed cable; Cable/length: 2.4 m
Accurate imm./pen. probe, 6m
cable, IP 67
40 mm
Ø 3 mm
Ø 3 mm
Connection: Fixed cable; Cable/length: 6 m
Accurate immersion/penetration
probe, cable: 1.5 m long, IP 67
40 mm
Ø 3 mm
Ø 3 mm
Connection: Fixed cable; Cable/length: 1.5 m
Penetration probe NTC with ribbon cable, cable length 2 m, IP
54
Wall surface temperature probe,
e.g. to prove damage in building
material
60 mm
30 mm
Ø 5 mm
Ø 3.6 mm
Connection: Fixed cable; Cable/length: 3 m
Stainless steel NTC food probe
(IP65) with PUR cable
125 mm
15 mm
Ø 4 mm
Ø 3 mm
Connection: Fixed cable; Cable/length: 1.6 m
300 mm
30 mm
Pipe wrap probe with Velcro for
pipe diameter to max. 75 mm,
Tmax. +75°C, NTC
-50 to +150 °C2) ±0.5% of mv (+100 to +150
°C)
±0.2 °C (-25 to +74.9 °C)
±0.4 °C (remaining range)
-50 to +70 °C
±0.2 °C (-25 to +70 °C)
±0.4 °C (-50 to -25.1 °C)
0613 4611
Connection: Fixed cable; Cable/length: 1.5 m
The standard temperature probes from the Testo range can be individually tailored to your application. For more information please
contact your Testo partner.
%RH Plug-in probes
Illustration
Humidity / Temperature Probe
12mm
Ø 12 mm
Measuring
range
Accuracy
-20 to +70 °C
0 to 100 %RH
±0,3 °C
±2 %RH at +25 °C (2 to 98 %RH)
±0,03 %RH/K
± 1 digit
0 to +40 °C
0 to 100 %RH
±0,3 °C
±2 %RH at +25 °C (2 to 98 %RH)
±0,08 %RH/K
± 1 digit
Ø 4 mm
Humidity / Temperature Probe 4
mm
The specified accuracy class of the Saveris radio and Ethernet probe is achieved
using these external probes.
Part no.
0572 6172
0572 6174
* Probe tested to EN 12830 for suitability in the transport and storage sectors
2) Long-term measurement range +125°C, short-term +150°C or +140°C (2 minutes)
19
Saveris
testo Saveris™: Accessories
Power supply
Part no.
Battery for radio probe (4 AA alkali manganese mignon batteries)
0515 0414
Battery for radio probe for use below -10 °C (4
Energizer L91 Photo lithium)
0515 0572
Li-ion rechargeable battery for Saveris Base, Ethernet probe and
Saveris analog coupler U1E
0515 0021
Mains unit international 100-240 V AC / 6,3V DC for mains operation or
battery charging in instrument
0554 1096
Power supply (top-hat rail mounting) 90 to 264 VAC/24VDC (2.5A)
0554 1749
Power supply (desktop) 110 to 240 VAC/ 24VDC (350 mA)
0554 1748
Other features
Part no.
1
Magnetic foot aerial (dualband) with 3 m cable, for base with GSM
module (not suitable for USA, Canada, Chile, Argentina, Mexico)
0554 0524
Magnetic foot aerial (quadband) for base with GSM module
0554 0525
Alarm module (visual + acoustic), can be connected to base alarm
relay, Ø 70 x 164 mm, 24 V AC/DC / 320 mA, perm. light: red, perm.
tone: buzzer approx. 2.4 kHz (Mains unit 0554 1749 required)
0572 9999
ID-Nr. 0699 6111/1
Saveris protective housing for protection from high-pressure
cleaning and impact, IP 69 K suitable for wireless probes T1 / T1D /
T2 / T2D / Pt / PtD / H4D
0572 0200
Progamming adapter (from mini-DIN to USB) for Base, Ethernet probe,
Converter and Extender for the configuration of IP addresses
0440 6723
1
Magnetic foot aerial (dualband)
2
2
3
Software
Part no.
SBE software, incl. USB connecting cable base-PC
0572 0180
PROF software, incl. USB connecting cable base-PC
0572 0181
CFR software, incl. Ethernet connection cable base to PC
0572 0182
Saveris adjustment software incl. connection cable for wireless and
Ethernet probes
0572 0183
Calibration Certificates
Part no.
ISO calibration certificate/temperature; Temperature probes; calibration points -8 °C; 0 °C; +40 °C per channel/instrument (suitable for
Saveris T1/T2)
ISO calibration certificate/temperature; Temperature probes; calibration points -18 °C; 0 °C; +60 °C; per channel/instrument (not suitable
for Saveris T1/T2)
DAkkS calibration certificate/Temperature; Temperature probes; calibration points -20 °C; 0 °C; +60 °C; per channel/instrument (not suitable for
Saveris T1/T2)
ISO calibration certificate humidity ; Humidity probe, calibration
points 11.3 %RH and 75.3 %RH at +25 °C/+77 °F; per channel/instrument
DAkkS calibration certificate humidity; Humidity probe, calibration
points 11.3 %RH and 75.3 %RH at +25 °C; per channel/instrument
20
Alarm module (visual + acoustic), can
be connected to base alarm relay
3
0520 0171
0520 0151
0520 0261
0520 0076
0520 0246
Saveris protective housing
We measure it.
testo Saveris™ set
Adjustment
You can assemble all individual components yourself, of
Naturally all testo Saveris probes are adjusted in the factory,
course, but you also have the option of ordering a testo
which is confirmed by an adjustment report. You can
Saveris set. This can be supplemented with individual
perform further calibrations or adjustments either yourself
components as required.
on site, via a service provider or in a calibration laboratory.
The separate Saveris adjustment software is available for
this. After successful adjustment, the current data is stored
in the probe. At the same time, the adjustment software and
the Saveris software accept this data so that the adjustment
histories are available.
Radio and Ethernet probes are connected to a cable via the
service interface for adjustment.
If you do not wish to perform your own calibration, Testo is
available as a service provider.
Set: 2.4 GHz, consisting of base 0572 0260, 3 NTC radio probes
without display 0572 1250, mains unit for base 0554 1096 and SBE
software 0572 0180 incl. USB cable
Saveris adjustment software
incl. connection cable for wireless and Ethernet probes
Set 2.4 GHz
Part no. 0572 0250
Part no. 0572 0183
21
Saveris
The essence
of precision.
Made in Germany – on the job for you
worldwide.
The requirements for practical measurement solutions are becoming increasingly more complex and customized. At Testo
we have made it our business to recognize these customer
requirements in industry and trade, and to translate them permanently into new technologies. We carry out our own intensive research, and for decades have been at the cutting edge
Certified reliability
of the market. Real innovations in sensor systems as well as
Quality assurance allows no leeway. Testo Industrial Ser-
advances made in microelectronics, measurement data sto-
vices offers certified calibration according to all valid guide-
rage or communication with other media such as a PCs and
lines, as well as the qualification and validation of portable
portable terminals benefit all Testo customers.
and stationary measurement technology. The calibrations
take place in Testo’s own accredited high-tech laboratories
Competent service
at our facility, or directly on site at the customer’s busi-
Testo offers professional and reliable consultation for all que-
ness.
stions pertaining to measuring technology. We provide users
quick assistance also after the purchase is made – worldwide.
Research and development
Testo invests roughly 10 percent of turnover in Research and
Development annually. Staff from many different disciplines
such as physics, chemistry, biology, electrotechnology and
process technology conduct applied research in sensor and
measurement technology. Testo maintains international cooperation with universities and research institutes, and is represented in a number of committees which are concerned
with innovative measurement technology for various fields.
22
We measure it.
Worldwide presence
Testo is a manufacturer of measuring instruments and
retrofitting further system components, please refer to your
measuring systems with a global presence, with 31
competent contact in your country.
international subsidiaries and representatives in numerous
You can find an overview of the nearest service location at
countries. Naturally, Testo also offers you on-site service.
www.testo.com.
For questions regarding testo Saveris, from installation to
23
www.testo.com
0981 8164/msp/A/05.2012
Subject to change without notice.
Saveris
We measure it.