More Precision
optoCONTROL // Optical precision micrometers
14
High resolution LED micrometer
optoCONTROL 2600
Measuring range 40mm
Resolution 0.1µm
Measuring rate 2.3kHz
Linearity typ. <3µm
Analogue
Analog output 0 ... 10VDC
Serial
Serial interface RS232/RS422
LED light source
Maximum resolution and accuracy
Outstanding repeatability
Measuring rate 2.3kHz for fast processes
Insensitive to external light
Measurement against glass and
transparent plastics
Six different measuring programs
Measures up to 4 segments simultaneously
Free parameterisation and data acquisition tool
Measuring principle
optoCONTROL 2600 is an optical measuring system with integrated
high resolution CCD camera. Using a special lens arrangement, an
LED light source produces a parallel light curtain (visible red light),
which is imaged on the CCD camera via a telecentric lens. If an object
to be measured is placed in the light curtain, the shadow it creates is
detected by the CCD array. The measured data is output via analog
and digital interfaces. The system is insensitive to high external light
conditions.
System design
optoCONTROL 2600 consists of a sensor unit and a controller, which
are attached to a mounting rail. The sensor unit comprises a light
source with high power LED and a receiver with telecentric lens and
CCD array. The sensor unit is controlled and evaluated by an intelligent
controller with graphical display for operation and display of the measured value. The adjustable light source enables precise measurement
of most transparent objects. Significantly higher accuracies and repeatability of measured data is made possible due to the combination of
LED with telecentric lens arrangement. The system is insensitive to dirt
and moisture.
Predefined measurement modes
(six individual programs can be generated)
Segment
Multisegment
Gap
Edge light / dark
Edge dark / light
Diameter
Analog output
Digital output
Switching output
External controller:
easy operation and measured
value display (included)
LED light source:
wear-free and long
service life
Receiver with telecentric
lens for high precision
measurements:
Linearity ≤3μm
Resolution 0.1μm
Light source to CCD camera gap 300 ±50mm;
option (209/210) 400mm ±50mm
Measuring range 40mm
Measurement object diameter from 0.3mm
15
Model
ODC2600-40
ODC2600-40(209)
Measuring range
ODC2600-40(210)
40mm
Smallest diameter or gap (detectable target)
0.3mm
Distance light source - CCD camera (free space)
300 (±50)mm
400 (±50)mm
400 (±50)mm
Distance (target to receiver)
150 (±5)mm
200 (±5)mm
200 (±5)mm
Linearity (3 s) 1)
≤3µm
Resolution 2)
0.1µm
Repeatibility 1) 3)
≤1µm
≤1.5µm
Measuring rate
≤1.5µm
2.3kHz
Light source
red LED
Analog output (voltage)
0 ... 10VDC, range ±10VDC, selectable
Digital output
RS232 (115.2kBaud) or RS422 (691.2kBaud)
Switching output
error, 4x limit, synchronisation
Input
zero; reset; trigger; synchronisation; light on/off (programmable)
Shock
acc. IEC 60068-2-29
Vibration
acc. IEC 60068-2-6
Operation temperature
0 to 50°C
Storage temperature
-20 to 70°C
Power supply
24VDC (±15%), <1A
Cable length
(controller-light source / controller-CCD camera)
standard: 2m, cable outlet
light source and receiver 90°
standard: 2m
receiver / light source
Protection class
IP 64
controller
IP 40
Measurement programs
edge light-dark; edge dark-light; diameter; gap; segment; multi-segments; 4 user-programs
LC-display (value, maximum, minimum, peak-to-peak); display in mm or inch, selectable;
menu languages in German / English, selectable; 3x LED (power on, light on, error)
Display
All specifications are measured at a constant temperature of 20°C after a warm-up time of 30 minutes.
1)
(edge measurement, no averaging at the target, operating distance 150 ±5mm) <±3μm
2)
Display resolution (resolution digital output 0.6μm)
3)
Measured at static noise for 3 min.
Optional versions
ƒƒCarry case version for service tasks
ƒƒCustomized cable lengths, modified cable outlet
ƒƒCustomer-specific software (measuring programs, statistics)
ƒƒSystem for measurement of grooved surfaces
ƒƒSystem with reduced distance between transmitter and receiver
ƒƒSystem with reduced and increased distance between transmitter and receiver
LED-light source
Receiver
87
4
45
39
Target
71
71
Controller
116
39
mid of
measuring
range
40.5
39
Measuring
range
40
39
24
110
97
ø4.8
Mouting rail (detachable)
Measuring distance 150 ±5
optional (209/210) 200 ±5
ø6.6
ø4.6
50
78
5
35
35
M4x5
Light source and receiver are keyed
34
78
195
200
510
155
191
12
50
30
26.5
45
Measuring level
M4x5
100
80
4
300; optional (209/210) 400 ±50
Measuring distance 150 ±5
optional (209/210) 200 ±5
16
Accessories
optoCONTROL
IF2008 - PCI interface card
Particular benefits
ƒƒ4x digital signals and two encoders with basic printed circuit board
ƒƒAdditional expansion board for a total of 6x digital signals, 2x encoder
and 2x analog signals and 8x I/O Signals
ƒƒFIFO data memory
ƒƒSynchronous data acquisition
IF2008
Example: measurement of diameters with two optoCONTROL.
The diameter to be measured can be increased using two optoCONTROL. See CSP2008 universal controller.
IF2008E - Expansion board
Particular benefits
ƒƒTwo digital signals, two analog signals and 8 I/O signals
ƒƒOverall with IF2008: 6 digital signals,2 encoders and 2 analog
signals and 8 I/O signals
ƒƒFIFO data memory
ƒƒSynchronous data acquisition
Diverse ODC tools
Depending on the sensor, diverse tools for continuous measurement
value recording and parameter set up are available free of charge.
17
CSP2008 - Universal controller for up to six sensor signals
The controller CSP2008 has been designed to process 2 to 6 both optical and other sensors
from Micro-Epsilon (6 digital or 4 analog input signals max., 2x internal + 4x external via EtherCAT modules from the company Beckhoff. EtherCAT is intended as external bus for connecting
further sensors and I/O modules. The controller is equipped with a display offering multicolor
backlighting which changes its color in the case of exceeding the limit value while a signal is
displayed.
Features
ƒƒReal-time processing of input and output signals at up to 100kHz (user selectable)
ƒƒUnique user interface for the configuration of the controller via Ethernet on a PC or laptop.
All user selectable functions of the controller and the measured values can be viewed,
displayed and stored in real time via your own web browser without installing any 3rd part
software
ƒƒSimple sensor connection with automatic sensor recognition, configuration of the sensor
using buttons and display on controller or via web browser
ƒƒModular system upgradable with additional I/O modules for customer-specific requirements.
The internal communication between I/O components using EtherCAT connection (CSP 2008
acts as master)
ƒƒExtremely flexible and powerful functionality; function modules can be combined in many
ways
ƒƒSimple mounting using DIN rail TS 35
Universal controller with DIN rail TS 35
(dimensions not to scale)
35
96.8
103.1
45.2
146
3.3
57.9
69.1
IF1032/ETH
The IF1032/ETH interface module now enables to run sensors equipped with analog interfaces
with the proven operating concept based on a web interface. The Ethernet interface permits to
easily display the measured data on a PC. Moreover, sensors can be connected to an EtherCAT
bus. The RS485 interface allows to connect new sensors that use the Micro-Epsilon specific
RS485 protocol.
Interfaces
ƒƒ1x RS485 (ME-internal protocol)
ƒƒ2x analog-in (14 bit, max. 4 ksps), voltage
ƒƒ1x analog-in, (14 bit, max. 4 ksps), current
ƒƒInputs for supply voltage
ƒƒTrigger input
ƒƒEtherCAT synchronisation output
ƒƒOutput for sensor power supply
CSP2008
18
Accessories
optoCONTROL
Accessories optoCONTROL 1200/1201
Article number
2901260
2901483
2901261
0260031.11
2420066
2966006 *
2966007 *
2966008 *
2966018
2966019
2966020
2966021
2966024
2966025
Model
PC1200-5
PC1200-10
PC1200/90-5
DD241PC(11)-U
IF1032/ETH
ODC1202-L100
ODC1202-L200
ODC1202-L500
JU1200-VR
JU1200-HR
JU1200-VT
JU1200-HT
BR1200L220
BR1200L320
Description
Power supply and signal cable 5m, straight connector, for light source and receiver unit
Power supply and signal cable 10m, straight connector, for light source and receiver unit
Power supply and signal cable 5m, angled connector, for light source and receiver unit
Digital display unit, RS232, connection for 1 analog sensor 0-10V, 2 limit switches
ME Ethernet/EtherCAT interface module max.14Bit/4k samples/sec
Mounting rail for ODC1202, 400mm; distance light source/receiver max.100mm
Mounting rail for ODC1202, 500mm; distance light source/receiver max. 200mm
Mounting rail for ODC1202, 800mm; distance light source/receiver max. 500mm
ODC1200 adjustment plate for vertical mounting of the receiver
ODC1200 adjustment plate for horizontal mounting of the receiver
ODC1200 adjustment plate for vertical mounting of the transmitter
ODC1200 adjustment plate for horizontal mounting of the transmitter
Bracket for mounting as C-frame, length 220mm, 2 pcs. required
Bracket four mounting as C-frame, height 320mm, 2 pcs. required
*only for C-frame mounting combined with adjustment plate JU1200 and bracket BR1200
Accessories optoCONTROL 1202
2901497
2901482
2901371
2901509
2901848
2901373
2901510
2966006
2966007
2966008
6414114
6414107
2420057
2420066
CE1202-2
CE1202-5
SCD1202-2-RS232
SCD1202-5-RS232
SCD12xx-2-USB
SCA1202-2
SCA1202-5
ODC1202-L100
ODC1202-L200
ODC1202-L500
EK1100/CSP2008
EL3162/CSP2008
CSP2008
IF1032/ETH
Connecting cable light source-receiver, 2m
Connecting cable light source-receiver, 5m
Digital output cable, 2m, for connection to a RS232 port
Digital output cable, 5m, for connection to a RS232 port
Digital output cable for USB connection incl. driver, 2m
Power supply and analog output cable, 2m
Power supply and analog output cable, 5m
Mounting rail for ODC1202, 400mm; distance light source/receiver max.100mm
Mounting rail for ODC1202, 500mm; distance light source/receiver max. 200mm
Mounting rail for ODC1202, 800mm; distance light source/receiver max. 500mm
Bus terminal
Bus terminal; 2-channel analog input terminal
Universal controller for displacement sensors
ME Ethernet/EtherCAT interface module max.14Bit/4k samples/sec
Accessories optoCONTROL 1220
2901871
2901851
2901852
2901371
2901509
2901848
2901373
2901510
2966009
2966011
2966012
6414114
6414107
2420057
2420066
CE1220-1
CE1220-2
CE1220-5
SCD1202-2-RS232
SCD1202-5-RS232
SCD12xx-2-USB
SCA1202-2
SCA1202-5
ODC1220-L220
ODC1220-L420
ODC1220-L620
EK1100/CSP2008
EL3162/CSP2008
CSP2008
IF1032/ETH
Connecting cable light source-receiver, 1m
Connecting cable light source-receiver, 2m
Connecting cable light source-receiver, 5m
Digital output cable, 2m, for connection to a RS232 port
Digital output cable, 5m, for connection to a RS232 port
Digital output cable for USB connection incl. driver, 2m
Power supply and analog output cable, 2m
Power supply and analog output cable, 5m
Mounting rail for ODC1220, 400mm; distance light source/receiver max. 220mm
Mounting rail for ODC1220; 600mm; distance light source/receiver max. 420mm
Mounting rail for ODC1220; 800mm; distance light source/receiver max. 620mm
Bus terminal
Bus terminal; 2-channel analog input terminal
Universal controller for displacement sensors
ME Ethernet/EtherCAT interface module max.14Bit/4k samples/sec
Accessories optoCONTROL 2500/2600
2901123
2901124
2901120
2901215
2901121
2213017
2213018
2901122
2901057
2901118
2901058
2901119
2420057
2901504
2901505
PC2500-3
PC2500-10
SCA2500-3
SCA2500-10
SCD2500-3/3/RS232
IF2008
IF2008E
SCD2500-3/10/RS422
CE1800-3
CE2500-3
CE1800-8
CE2500-8
CSP2008
SCD2500-3/CSP
SCD2500-10/CSP
Power supply cable 3m, open
Power supply cable 10m, open
Signal output cable, analog, 3m
Signal output cable, analog, 10m
Signal output cable, 3m, analog / RS232
PCI interface card RS422
Expansion board analog / RS422 / PCI
Signal output cable, 3m, analog / RS422, 10m
Sensor cable extension for camera, 3m
Sensor cable extension for light source, 3m
Sensor cable extension for camera, 8m
Sensor cable extension for light source, 8m
Universal controller for up to six sensor signals
Output cable, 3m, for connection to CSP2008
Output cable, 10m, for connection to CSP2008
19
Accessories optoCONTROL 2500/2600
2964022
2213024
2213025
2213022
29011111
2901528
2901561
2901563
6414071
MBC300
IF2004/USB converter
IF2001/USB converter
RS-422/USB converter
SCD2500-3/RS422
IF2008-Y adaptation cable
SCD2500-3/IF2008
SCD2500-8/IF2008
Extension clamp
Assembly block for controller ODC2500/2600
4 channel RS422/USB converter
IF2001/USB converter RS422 to USB
Industrial converter for ODC2xxx sensors, RS-422/USB
Output cable RS422, 3m, open ends
Adaptation cable, Y-type, 100mm
Interface cable
Interface cable
Extension clamp RS422 to CSP2008
Accessories optoCONTROL 2520
2901925
SCD2520-3
29011002
SCD2520/90-5
29011042
SCD2520/90-8
29011003
PC/SC2520/90-5
2901918
PC/SC2520-3
29011037
PC/SC2520-10
29011038
PC/SC2520-20
29011039
PC/SC2520-30
29011040
SCD2520-5 M12
2901919
CE2520-1
2901920
CE2520-2
2901921
CE2520-5
2901922
CE2520/90-1
2901923
CE2520/90-2
2901924
CE2520/90-5
2901967
PC/SC2520-3/CSP
29011014
PC/SC2520-3/IF2008
2213024
IF2004/USB converter
2213022
RS-422/USB converter
2213025
IF2001/USB converter
0260031.10
DD241PC(10)-U
0260031.11
DD241PC(11)-U
2213017
IF2008
2213018
IF2008E
2901528
IF2008-Y adaptation cable
2420057
CSP2008
6414071
Extension clamp
6414113
EK1122/CSP2008
6414114
EK1100/CSP2008
Digital output cable, 3m, RJ45/ Ethernet/EtherCAT
Digital output cable, 5m, RJ45/ Ethernet/EtherCAT
Digital output cable, 8m, RJ45/ Ethernet/EtherCAT
Supply-, interface- and signal cable, 5m
Supply-, interface- and signal cable, 3m
Supply-, interface- and signal cable, 10m
Supply-, interface- and signal cable, 20m
Supply-, interface- and signal cable, 30m
Digital output cable Ethernet/EtherCAT, 5m
Connecting cable light source-receiver, 1m
Connecting cable light source-receiver, 2m
Connecting cable light source-receiver, 5m
Connecting cable light source-receiver, 1m
Connecting cable light source-receiver, 2m
Connecting cable light source-receiver, 5m
Interface and supply cable for CSP2008
Interface and supply cable for IF2008
4 channel RS422/USB converter
Industrial converter for ODC2xxx sensors, RS-422/USB
Single channel RS422/USB converter
Digital process display, 0...10V
Digital process display, 2 limit switches, 0...10V
PCI interface card RS422
Expansion board analog / RS422 / PCI
Adaptation cable, Y-type, 100mm
Universal controller for displacement sensors
Extension clamp RS422 to CSP2008
2 port RJ45 EtherCAT junction
Bus terminal
Accessories power supplies
2420065
PS2030
2420062
PS2020
2420042
PS2011
Wall power supply 24V/24W/ 1A; 2m-PVC; clamp
Power supply for DIN rail mounting 24VDC / 2.5A
Power supply for laboratory use 230VAC/ 24VDC / 5.2A
Further cable lengths on request.
Laser radiation
Do not view directly with
optical instruments
Class 1M Laser Product
IEC 60825-1: 2008-05
P≤2mW, E≤0.2mW/cm²; λ=670nm
Class 1 Laser Product
IEC 60825-1: 2008-05
THIS PRODUCT COMPLIES
WITH FDA REGULATIONS
21CFR 1040.10 AND 1040.11
optoCONTROL 2520 use a semiconductor class 1M laser with a wavelength of 670nm.
The maxi­mum optical output power is <=2mW . This laser class does not require any
additional protection equipment. Be careful with the dazzling effect related to optical
instruments.
optoCONTROL 12xx and 2500 use a semiconductor class 1 laser with a wavelength of
670nm. The maxi­mum optical output power is ≤0.39 mW. This laser class does not require
any additional protection equipment.
Modifications reserved / Y9766284-D011046GKE
High performance sensors made by Micro-Epsilon
Sensors and systems for displacement
and position
Sensors and measurement devices for
non-contact temperature measurement
2D/3D profile sensors (laser scanner)
Optical micrometers, fiber
optic sensors and fiber optics
Color recognition sensors, LED analyzers
and color online spectrometer
Measurement and inspection systems
MICRO-EPSILON USA
8120 Brownleigh Dr. · Raleigh, NC 27617 / USA
Phone +1/919/787-9707 · Fax +1/919/787-9706
me-usa@micro-epsilon.com · www.micro-epsilon.com
Download PDF

advertising