CABLOFIL ®
CABLOCUT
Battery powered cable tray cutter
FOR BURR-FREE OPERATIONS
AT-A-GLANCE
• Open rotating cutting head
• Electronic control and monitoring of cutting operation
• One-button operating concept for controlling all
tool functions
• Ergonomic 2-component housing with soft grips for
comfortable and safe one-hand operation
• Balanced center of gravity for simple handling and
effortless operations
• LED for workplace illumination
• High-performance 18V Lithium-ion batteries with
high capacity and extremely short charging time
(standard Makita design battery)
• High-performance motors for maximum operating speed
• Energy saving function by switching off the motor when
the cutting operation is complete
• Quick motor stop for high user safety
• Automatic retraction when cut is complete
• Manual blade retraction is required
• Multifunction LED for maintenance display and battery
charge indication of the battery
• Environmentally-friendly hydraulic oil, quickly biodegradable
FEATURES & BENEFITS
• Cablocut – faster and easier than other electric cutters
• Hydraulic damping – extends tool life, reduces oil leakage
• Easily replaceable shear blades –user replaceable
• Shear cut blade design – no grinding
• Smaller head – cuts flush with cross wire
Burr-free and clean operations
The battery powered wire mesh
cable tray cutter is able to cut Steel
or Stainless Steel trays up to 6mm
dia easily, quickly, and cleanly.
Special shearing blade
geometry – no burr
formation – saves time, no
follow-up work required
Hydraulic damping system
significantly extends service
life – maintenance required
only after 20,000 cuts
Easily replaceable
cutting blade
Cablocut
Clean Edge
Other
Smaller head permits
outstanding accessibility and
cutting close to the weld point
LED for workplace
C A B LO C U T D E TA I L S
Cutting Range
max. 6mm VA
Cutting Force
24 kN
Cutting Time
< 1s
Number of Cuts
approx. 300 at 6mm VA
Battery Voltage
18 V (SOLD SEPARATELY)
Charging Time
15 min
Weight incl. Battery
1.9 kg
Ambient Temperature
10 to +40 degrees
C AT #
ITEM
RIGID PLASTIC CASE
room for cutter,
battery & charger
BATTERY
18 V / 1.5 Ah /
Li-Ion
CHARGER
Quick-charger for 18 V
Li-Ion batteries, 20 V
(SOLD SEPARATELY) (SOLD SEPARATELY)
©2017 Legrand All Rights Reserved 05|17
DESCRIPTION
945064
CABLOCUT*
Cutter, Case, Spare Blade
945065
CABLOCUT BLADES
Spare Blades (one set)
945066
CABLOCUT BATTERY* 18V Li-Ion Battery 1.5 A/HR
945067
CABLOCUT CHARGER* 120 VAC Quick Charger
*BATTERY AND CHARGER SOLD AND SHIPPED SEPARATELY
Electrical Wiring Systems
8319 State Route 4
Mascoutah, IL 62258
800.658.4641
www.legrand.us/cablofil
570 Applewood Crescent
Vaughan, Ontario L4K 4B4
905.738.9195
www.legrand.ca
FOLLOW US