WF1104ZA(C/U)
WF1104ZB(C/U)
WF1104XA(C/U)
WF1104XB(C/U)
Washing Machine
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
ARNO_DC68-03038N-13_EN_151021.indd 1
2015-10-21
6:00:54
contents
SAFETY INFORMATION
3
3
What you need to know about safety instructions
Important safety symbols and precautions
11
12
12
12
13
13
13
13
13
18
19
19
20
23
23
24
24
25
26
27
27
28
28
29
29
30
31
32
32
33
33
34
34
35
36
Checking the parts
Meeting installation requirements
Electrical supply and grounding
Water Supply
Drain
Flooring
Surrounding temperature
Alcove or closet installation
Installing your washing machine
Environment
Washing for the first time
Basic instructions
Using the control panel
Child lock
Sound off
Delay end
My cycle
Bubble
Washing clothes using the cycle selector
Washing clothes manually
Laundry guidelines
Detergent and additives information
Which detergent to use
Detergent drawer
Liquid Detergent (Selected models)
Drum Clean
Draining the washing machine in an emergency
Cleaning the debris filter
Cleaning the exterior
Cleaning the detergent drawer and drawer recess
Cleaning the water hose mesh filter
Repairing a frozen washing machine
Storing your washing machine
Check these points if your washing machine...
Information codes
CALIBRATING YOUR WASHING
MACHINE
36
Calibration mode
CYCLE CHART
37
Cycle chart
APPENDIX
38
38
39
Fabric care chart
Protecting the environment
Specifications
3
11
SETTING UP YOUR WASHING
MACHINE
WASHING A LOAD OF LAUNDRY
19
CLEANING AND MAINTAINING YOUR
WASHING MACHINE
30
TROUBLESHOOTING AND
INFORMATION CODES
35
36
37
38
English - 2
ARNO_DC68-03038N-13_EN_151021.indd Sec1:2
2015-10-21
6:00:56
safety information
Congratulations on your new Samsung washer. This manual contains important
information on the installation, use and care of your appliance. Please take time to
read this manual to take full advantage of your washer’s many benefits and features.
01 SAFETY INFORMATION
WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS
Please read this manual thoroughly to ensure that you know how to safely and efficiently operate the
extensive features and functions of your new appliance and retain it at a safe place near the appliance
for your future reference. Use this appliance only for its intended purpose as described in this instruction
manual.
Warnings and Important Safety Instructions in this manual do not cover all possible conditions and
situations that may occur. It is your responsibility to use common sense, caution, and care when installing,
maintaining, and operating your washer.
Because these following operating instructions cover various models, the characteristics of your washer
may differ slightly from those described in this manual and not all warning signs may be applicable. If you
have any questions or concerns, contact your nearest service center or find help and information online at
www.samsung.com.
IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS
What the icons and signs in this user manual mean:
WARNING
Hazards or unsafe practices that may result in severe personal injury,
death and/or property damage.
CAUTION
Hazards or unsafe practices that may result in personal injury and/or
property damage.
CAUTION
To reduce the risk of fire, explosion, electric shock, or personal injury
when using your washer, follow these basic safety precautions:
CAUTION
To reduce the risk of fire or explosion, follow these basic precautions.
Do NOT attempt.
Do NOT disassemble.
Do NOT touch.
Follow directions explicitly.
Unplug the power plug from the wall socket.
Make sure the machine is grounded to prevent electric shock.
Call the service centre for help.
Note
These warning signs are here to prevent injury to you and others.
Please follow them explicitly.
After reading this section, keep it in a safe place for future reference.
Read all instructions before using the appliance.
As with any equipment using electricity and moving parts, potential hazards exist. To safely
operate this appliance, become familiar with its operation and exercise care when using it.
English - 3
ARNO_DC68-03038N-13_EN_151021.indd 3
2015-10-21
6:00:56
safety information
1. This appliance is not to be used by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their
safety.
2. For use in Europe: This appliance can be used by
children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance
in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and
user maintenance shall not be made by children without
supervision.
3. Children should be supervised to ensure that they do not
play with the appliance.
4. If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
5. The new hose-sets supplied with the appliance are to be
used and that old hose-sets should not be reused.
6. For appliances with ventilation openings in the base, that a
carpet must not obstruct the openings.
7. For use in Europe: Children of less than 3 years should
be kept away unless continuously supervised.
English - 4
ARNO_DC68-03038N-13_EN_151021.indd 4
2015-10-21
6:00:57
WARNING
SEVERE WARNING SIGNS FOR INSTALLATION
The installation of this appliance must be performed by a qualified technician or service
company.
- Failure to do so may result in electric shock, fire, an explosion, problems with the
product, or injury.
The appliance is heavy, take care upon lifting it
Plug the power cord into an AC 220-240V / 50Hz wall socket or higher and use the socket
for this appliance only. In addition, do not use an extension cord.
- Sharing a wall socket with other appliances using a power strip or extending the power
cord may result in electric shock or fire.
- Ensure that the power voltage, frequency and current are the same as those of the
product specifications. Failure to do so may result in electric shock or fire. Plug the
power plug into the wall socket firmly.
Remove all foreign substances such as dust or water from the power plug terminals and
contact points using a dry cloth on a regular basis.
- Unplug the power plug and clean it with a dry cloth.
- Failure to do so may result in electric shock or fire.
Plug the power plug into the wall socket in the right direction so that the cord runs towards
the floor.
- If you plug the power plug into the socket in the opposite direction, the electric wires
within the cable may be damaged and this may result in electric shock or fire.
Keep all packaging materials well out of the reach of children, as packaging materials can
be dangerous to children.
- If a child places a bag over its head, it may result in suffocation.
When the appliance or power plug or power cord is damaged, contact your nearest service
centre.
This appliance must be properly grounded.
Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.
- This may result in electric shock, fire, an explosion, or problems with the product.
- Never plug the power cord into a socket that is not grounded correctly and make sure
that it is in accordance with local and national codes.
Do not install this appliance near a heater, inflammable material.
Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct
sunlight and water (rain drops).
Do not install this appliance in a location of low temperature
- Frost may cause tubes to burst.
English - 5
ARNO_DC68-03038N-13_EN_151021.indd 5
2015-10-21
6:00:57
01 SAFETY INFORMATION
8. CAUTION: In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not
be supplied through an external switching device, such as
a timer, or connected to a circuit that is regularly switched
on and off by the utility.
safety information
Do not install this appliance in a location where gas may leak.
- This may result in electric shock or fire.
Do not use an electric transformer.
- It may result in electric shock or fire.
Do not use a damaged power plug, damaged power cord or loose wall socket.
- This may result in electric shock or fire.
Do not pull or excessively bend the power cord.
Do not twist or tie the power cord.
Do not hook the power cord over a metal object, place a heavy object on the power cord,
insert the power cord between objects, or push the power cord into the space behind the
appliance.
- This may result in electric shock or fire.
Do not pull the power cord, when unplugging the power plug.
- Unplug the power plug by holding the plug.
- Failure to do so may result in electric shock or fire.
Do not lay the power cord and tubes where you may fall over them.
This appliance should be positioned so that the power plug, the water supply taps, and the
drain pipes are accessible.
CAUTION
CAUTION SIGNS FOR INSTALLATION
This appliance should be positioned in such a way that it is accessible to the power plug.
- Failure to do so may result in electric shock or fire due to electric leakage.
Install your appliance on a level and hard floor that can support its weight.
- Failure to do so may result in abnormal vibrations, moves, noise, or problems with the
product.
WARNING
SEVERE WARNING SIGNS FOR USING
If the appliance is flooded, Turn off the water & power supply immediately and contact your
nearest service centre.
- Do not Touch the power plug with wet hands.
- Failure to do so may cause electric shock.
If the appliance generates a strange noise, a burning smell or smoke, unplug the power
plug immediately and contact your nearest service centre.
- Failure to do so may result in electric shock or fire.
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without
touching the power plug. Do not touch the appliance or power cord.
- Do not use a ventilating fan.
- A spark may result in an explosion or fire.
Do not let children play in or on the washer. In addition, when disposing of the appliance,
remove the washer door lever.
- If trapped inside, the child may become trapped and suffocate to death.
Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the
washer before using it.
English - 6
ARNO_DC68-03038N-13_EN_151021.indd 6
2015-10-21
6:00:57
Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or
other flammable or explosive substances.
- This may result in electric shock, fire or an explosion.
01 SAFETY INFORMATION
Do not open the washer door by force while it is operating (high-temperature washing/
drying/spinning).
- Water flowing out of the washer may result in burns or cause the floor to be slippery.
This may result in injury.
- Opening the door by force may result in damage to the product or injury.
Do not insert your hand under the washer.
- This may result in injury.
Do not touch the power plug with wet hands.
- This may result in electric shock.
Do not turn the appliance off by unplugging the power plug while an operation is in
progress.
- Plugging the power plug into the wall socket again may cause a spark and result in
electric shock or fire.
Do not let children or infirm persons use this washer unsupervised. Do not let children climb
in the appliance.
- Failure to do so may result in electric shock, burns or injury.
Do not insert your hand or a metal object under the washer while it is operating.
- This may result in injury.
Do not unplug the appliance by pulling at the power cord, always grip plug firmly and pull
straight out from the outlet.
- Damage to the cord may cause short-circuit, fire and/or electric shock.
Do not attempt to repair, disassemble, or modify the appliance yourself.
- Do not use any fuse (such as cooper, steel wire, etc.) other than the standard fuse.
- When repairing or reinstalling the appliance is required, contact your nearest service
centre.
- Failure to do so may result in electric shock, fire, problems with the product, or injury.
If the water supply hose comes loose from the Water tap and floods the appliance, unplug
the power plug.
- Failure to do so may result in electric shock or fire.
Unplug the power plug when the appliance is not being used for long periods of time or
during a thunder/lightning storm.
- Failure to do so may result in electric shock or fire.
Do not let children (or pets) play in or on your washing machine. The washing machine door
does not open easily from the inside and children may be seriously injured if trapped inside.
English - 7
ARNO_DC68-03038N-13_EN_151021.indd 7
2015-10-21
6:00:57
safety information
CAUTION
CAUTION SIGNS FOR USING
When the washer is contaminated by a foreign substance such as detergent, dirt, food
waste, etc., unplug the power plug and clean the washer using a damp and soft cloth.
- Failure to do so may result in discolouration, deformation, damage or rust.
The front glass may be broken by a strong impact. Take care when using the washer.
- When the glass is broken, it may result in injury.
After a water supply failure or when reconnecting the water supply hose, open the Water
Tap slowly.
Open the Water Tap slowly after a long period of non-use.
- The air pressure in the water supply hose or the water pipe may result in damage to a
part or in water leakage.
If a drain error occurs during an operation, check if there is a draining problem.
- If the washer is used when it is flooded because of a draining problem, it may result in
electric shock or fire due to electric leakage.
Insert the laundry into the washer completely so that laundry does not get caught in the
door.
- If laundry gets caught in the door, it may result in damage to the laundry or the washer,
or result in water leakage.
Ensure that the Water Tap is turned off when the washer is not being used.
- Ensure that the screw on the water supply hose connector is properly tightened.
- Failure to do so may result in property damage or injury.
Take care that the rubber seal and the front door glass are not contaminated by a foreign
substance (e.g. waste, thread, hair, etc.)
- If a foreign substance is caught in the door or the door is not completely closed, it may
cause a water leakage.
Open the Water Tap and check if the water supply hose connector is firmly tightened and
that there is no water leaking before using the product.
- If the screws or the water supply hose connector are loose, it may result in water
leakage.
The product you have purchased is designed for domestic use only.
The use for business purposes qualifies as product misuse. In this case, the product will not
be covered by the standard warranty provided by Samsung and no responsibility can be
attributed to Samsung for malfunctions or damages resulting from such misuse.
English - 8
ARNO_DC68-03038N-13_EN_151021.indd 8
2015-10-21
6:00:57
Do not stand on top of the appliance or place objects (such as laundry, lighted candles,
lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.
- This may result in electric shock, fire, problems with the product, or injury.
Do not place an object that generates a electromagnetic field near the washer.
- This may result in injury due to a malfunction.
Since the water drained during a high-temperature wash or drying cycle is hot, do not
touch the water.
- This may result in burns or injury.
Do not wash, spin or dry water-proof seats, mats or clothing (*) unless your appliance has a
special program for washing these items.
- Do not wash thick, hard mats even if the washer mark is on the care label.
- This may result in injury or damage to the washer, walls, floor or clothing due to
abnormal vibrations.
* Woollen Bedding, rain covers, fishing vests, ski pants, sleeping bags, diaper covers,
sweat suits, and bicycle, motor cycle, car covers, etc.
Do not operate the washer when the detergent box is removed.
- This may result in electric shock or injury due to water leakage.
Do not touch the inside of the tub during or just after drying as it is hot.
- This may result in burns.
Do not insert your hand into the detergent box after opening it.
- This may result in injury as your hand may be caught by the detergent input device. Do
not place any objects (such as shoes, food waste, animals) other than laundry into the
washer.
- This may result in damage to the washer, or injury and death in the case of pets due to
the abnormal vibrations.
Do not press the buttons using sharp objects such as pins, knifes, fingernails, etc.
- This may result in electric shock or injury.
Do not wash laundry contaminated by oils, creams or lotions usually found in skincare
shops or massage clinics.
- This may result in the rubber seal becoming deformed and water leakage.
Do not leave metal objects such as a safety pin or hair pin, or bleach in the tub for long
periods of time.
- This may cause the tub to rust.
- If rust starts appearing on the surface of the tub, apply a cleansing agent (neutral) to the
surface and use a sponge to clean it. Never use a metal brush.
Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry
contaminated by dry cleaning detergent.
- This may result in spontaneous combustion or ignition due to the heat of the oxidation of
the oil.
Do not use hot water from water cooling/heating devices.
- This may result in problems with the washer.
English - 9
ARNO_DC68-03038N-13_EN_151021.indd 9
2015-10-21
6:00:57
01 SAFETY INFORMATION
Do not spray volatile material such as insecticide onto the surface of the appliance.
- As well as being harmful to humans, it may also result in electric shock, fire or problems
with the product.
safety information
Do not use natural hand-washing soap for the washer.
- If it hardens and accumulates inside the washer, it may result in problems with the
product, discolouration, rust or bad odours.
Do not wash large laundry items such as Bedding in the washing net.
- Place socks and brassieres into the washing net and wash them with the other laundry.
- Failure to do so may result in injury due to abnormal vibrations.
Do not use hardened detergent.
- If it accumulates inside the washer, it may result in water leakage.
For washing machines with ventilation openings in the base, ensure that the opening is not
obstructed by carpet or any other obstacles.
Make sure that the pockets of all clothing to be washed are empty.
- Hard, sharp objects, such as coins, safety pins, nails, screws, or stones can cause
extensive damage to the appliance.
Do not wash clothing with large buckles, buttons, or other heavy metal.
WARNING
SEVERE WARNING SIGNS FOR CLEANING
Do not clean the appliance by spraying water directly onto it.
Do not use the strong acid cleaning agent.
Do not use benzene, thinner or alcohol to clean the appliance.
- This may result in discolouration, deformation, damage, electric shock or fire.
Before cleaning or performing maintenance, unplug the appliance from the wall socket.
- Failure to do so may result in electric shock or fire.
English - 10
ARNO_DC68-03038N-13_EN_151021.indd 10
2015-10-21
6:00:57
setting up your washing
machine
02 SETTING UP
Be sure to have your installer follow these instructions closely so that your new
washing machine works properly and so that you’re not at risk of injury when doing
laundry.
CHECKING THE PARTS
Carefully unpack your washing machine, and make sure you’ve received all of the parts shown below.
If your washing machine was damaged during shipping, or if you do not have all of the parts, contact
Samsung Customer Service or your Samsung dealer.
Work top
Release lever
Detergent drawer
Control panel
Plug
Door
Drain hose
Emergency drain
tube
Levelling feet
Tub
Debris filter
Filter Cover
Spanner
* Bolt hole
covers
Cold
Hot
(Selected
model)
Water supply hose
Hose guide
Liquid
detergent box
(Selected
model)
* Bolt hole covers : The number of bolt hole covers depends on the model (3~6 covers).
English - 11
ARNO_DC68-03038N-13_EN_151021.indd 11
2015-10-21
6:00:57
setting up your washing
machine
MEETING INSTALLATION REQUIREMENTS
Electrical supply and grounding
WARNING
Never use an extension cord.
Use only the power cord that comes with your washing machine.
When preparing for installation, ensure that your power supply offers:
• AC 220-240V / 50Hz fuse or circuit breaker
• Individual branch circuit serving only your washing machine
Your washing machine must be grounded. If your washing machine malfunctions or breaks
down, grounding will reduce the risk of electric shock by providing a path of least resistance for
the electric current.
Your washing machine comes with a power cord having a three-prong grounding plug for use in
a properly installed and grounded outlet.
Never connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.
Improperly connecting the equipment-grounding conductor can result in electric shock.
Check with a qualified electrician or serviceman if you are unsure if the washing machine is
properly grounded. Do not modify the plug provided with the washing machine. If it does not fit
the outlet, have a proper outlet installed by a qualified electrician.
Water Supply
Your washing machine will fill properly when your water pressure is 50 kPa ~ 800 kPa. Water
pressure less than 50 kPa may cause water valve failure, not allowing the water valve to shut
off completely. Or, it may take the washing machine longer to fill than what the controls allow,
resulting in your washing machine turning off. (A fill-time limit, designed to prevent overflows/
flooding if an internal hose becomes loose, is built into the controls.)
The water taps must be within 120cm of the back of your washing machine for the provided inlet
hoses provided to reach your washing machine.
Most plumbing supply stores sell inlet hoses of various lengths up to 305 cm long.
You can reduce the risk of leaks and water damage by:
• Making water taps easily accessible.
• Turning off taps when the washing machine is not in use.
• Periodically checking for leaks at water inlet hose fittings.
WARNING
Before using your washing machine for the first time, check all connections at the water
valve and taps for leaks.
English - 12
ARNO_DC68-03038N-13_EN_151021.indd 12
2015-10-21
6:00:58
Drain
Samsung recommends a standpipe height of 65cm. The drain hose must be routed through
the drain hose clip to the standpipe. The standpipe must be large enough to accept the outside
diameter of the drain hose. The drain hose is attached at the factory.
For best performance, your washing machine must be installed on a solidly constructed floor.
Wood floors may need to be reinforced to minimize vibration and/or unbalanced loads. Carpeting
and soft tile surfaces are contributing factors to vibrations and the tendency for your washing
machine to move slightly during the spin cycle.
Never install your washing machine on a platform or poorly supported structure.
Surrounding temperature
Do not install your washing machine in areas where water may freeze, since your washing
machine always retains some water in its water valve, pump, and hose areas. Frozen water in
the lines can cause damage to belts, the pump, and other components.
Alcove or closet installation
To operate safely and properly, your new washing machine requires minimum clearances of:
Sides – 25 mm
Rear – 50 mm
Top – 25 mm
Front – 465 mm
If both the washing machine and a dryer are installed together, the front of the alcove or closet
must have at least 465 mm unobstructed air opening. Your washing machine alone does not
require a specific air opening.
INSTALLING YOUR WASHING MACHINE
STEP 1
Selecting a location
Before you install the washing machine, make sure the location:
•
•
•
•
•
•
Has a hard, level surface without carpeting or flooring that may obstruct ventilation
Is away from direct sunlight
Has adequate ventilation
Will not be freezing (below 0 ˚C)
Is away from heat sources such as oil or gas
Has enough space so that the washing machine doesn’t stand on its power cord
English - 13
ARNO_DC68-03038N-13_EN_151021.indd 13
2015-10-21
6:00:58
02 SETTING UP
Flooring
setting up your washing
machine
STEP 2
Removing the shipping bolts
Before installing the washing machine, you must remove all shipping bolts from the back of the
unit.
1. Loosen all the bolts with the supplied wrench.
Option
2. Hold the bolt with the spanner and pull it through the wide
section of the hole. Repeat for each bolt.
Option
3. Fill the holes with the supplied plastic covers.
Option
4. Store the shipping bolts away safely in case you have to move the washing machine in the
future.
WARNING
Packaging materials can be dangerous to children; keep all packaging material (plastic
bags, polystyrene, etc.) well out of the reach of children.
English - 14
ARNO_DC68-03038N-13_EN_151021.indd 14
2015-10-21
6:00:58
STEP 3
Adjusting the Levelling feet
When installing your washing machine, ensure that the power plug, the water supply and
the drain are easily accessible.
02 SETTING UP
1. Slide the washing machine into position.
2. Level your washing
machine by turning the
levelling feet in and out as
necessary by hand.
3. When your washing machine is level, tighten the nuts using
the wrench supplied with your washing machine.
STEP 4
Connecting the water and drain
Connecting the water supply hose
1. Take the L-shaped arm fitting for the cold water
supply hose and connect it to the cold water
supply intake on the back of the machine.
Tighten by hand.
Option
The water supply hose must be connected to
the washing machine at one end and to the
water tap at the other. Do not stretch the water
supply hose. If the hose is too short, replace
the hose with a longer, high pressure hose.
2. Connect the other end of the cold water supply
hose to your sink’s cold water tap and tighten
it by hand. If necessary, you can reposition the
water supply hose at the washing machine end
by loosening the fitting, rotating the hose, and
retightening the fitting.
For selected models with an additional hot water
intake:
1. Take the red L-shaped arm fitting for the hot water supply hose and connect it to the hot
water supply intake on the back of the machine. Tighten by hand.
2. Connect the other end of the hot water supply hose to your sink’s hot water tap and tighten
it by hand.
3. Use a Y-piece if you only want to use cold water.
English - 15
ARNO_DC68-03038N-13_EN_151021.indd 15
2015-10-21
6:00:58
setting up your washing
machine
Connecting the water supply hose
1. Remove the adaptor from the water supply hose.
Adaptor
Water supply
hose
2. First, using a ‘+’ type screwdriver, loosen the four screws
on the adaptor. Next, take the adaptor and turn part (2)
following the arrow until there is a 5 mm gap.
1
5 mm
2
3. Connect the adaptor to the water tap by tightening the
screws firmly while lifting the adaptor upwards.
Turn part (2) following the arrow and connect (1) and (2).
Water tap
1
2
4. Connect the water supply hose to the adaptor.
When you release part (3), the hose automatically
connects to the adaptor making a ‘click’ sound.
After you have connected the water supply
hose to the adaptor, ensure that it is connected
correctly by pulling the water supply hose
downwards.
3
5. Connect the other end of the water supply hose to the inlet
water valve at the rear of the washing machine. Screw the
hose clockwise all the way in.
Option
English - 16
ARNO_DC68-03038N-13_EN_151021.indd 16
2015-10-21
6:00:58
6. Turn on the water supply and ensure that no water leaks
from the water valve, tap or adaptor. If there is a water
leaks, repeat the previous steps.
WARNING
✗
✗
02 SETTING UP
•
Do not use your washing machine if there is a water leak.
This may cause electric shock or injury.
If the water tap has a screw type tap, connect the water
supply hose to the tap as shown.
Use the most conventional type of tap for the water supply. In case the tap is square or too
big, remove the spacing ring before inserting the tap into the adaptor.
Connecting the Aqua Hose (Selected models)
The Aqua Hose was invented for perfect leakage protection.
It is attached to the water supply hose and automatically cuts
off the water flow if the hose is damaged. It also displays a
warning indicator.
•
Connect the water supply hose to the tap as shown.
English - 17
ARNO_DC68-03038N-13_EN_151021.indd 17
2015-10-21
6:00:59
setting up your washing
machine
Connecting the drain hose
The end of the drain hose can be positioned in three ways:
1. Over the edge of a wash basin: The drain hose must be placed at a height of between 60 and
90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure the guide
to the wall with a hook or to the tap with a piece of string to prevent the drain hose from moving.
2. ln a sink drain pipe branch: The drain pipe branch must be above the sink siphon so that
the end of the hose is at least 60 cm above the ground.
60 ~ 90 cm
Drain hose
Hose guide
60 ~ 90 cm
3. ln a drain pipe: We recommend using a 65 cm high vertical
pipe; it must be no shorter than 60 cm and no longer than 90
cm.
The standpipe drain requires;
• minimum diameter 5 cm.
• minimum carry-away capacity 60 liter per minute.
STEP 5
Powering your washing machine
Plug the power cord into a wall sockets, an AC 220-240V / 50Hz approved electrical outlet protected by
a fuse or circuit breaker. (For more information on electrical and grounding requirements, see page 14.)
Test run
Make sure that you install your washing machine correctly by running the Rinse+Spin cycle
after the installation is complete.
STEP 6
Select the Language (selected LCD models)
At the beginning setting (After power on), the “Language setting” message appears
on the display. you can select one language among English, French, Dutch, German,
Italian, or Spanish.(Polish, Russian, Turkish, Chinese or Thai.)
* Language selections can be changed according to derived models.
1. Push the Rinse button to choose a language.
2. Push the Spin button to set the chosen language.
To reselect the language, press the Rinse and Spin buttons simultaneously for
3 seconds.
Türkçe
ᳯᐴ
Polska
Poccию
The LCD display Language may differ depending on the model.
ENVIRONMENT
Please dispose of the packaging materials for this product in an “environmentally friendly” manner.
For further detail, please contact your local area authority.
English - 18
ARNO_DC68-03038N-13_EN_151021.indd 18
2015-10-21
6:00:59
washing a load of laundry
With your new Samsung washing machine, the hardest part of doing laundry will be
deciding which load to wash first.
WASHING FOR THE FIRST TIME
1. Press the Power button.
2. Add a little detergent to the detergent compartment
the detergent drawer.
3. Turn on the water supply to the washing machine.
4. Press the Start/Pause button.
03 WASHING A LOAD OF LAUNDRY
Before washing laundry for the first time, you must run a complete empty cycle (i.e. no laundry).
in
This will remove any water that might be left over in the
machine from the manufacturer’s test run.
Compartment
Compartment
: Detergent for prewash, or starch.
: Detergent for the main wash, water softener, pre-soaking agent, bleach and
stain removal product.
To use liquid detergent, use the liquid detergent box (refer to page 31 of the manual for the
corresponding model). Do not add powdered detergent into the liquid detergent box.
Compartment
: Additives, e.g. fabric softener or former (fill no higher than lower edge (MAX)
of “A”).
BASIC INSTRUCTIONS
1. Load your laundry into the washing machine.
WARNING
Do not overload the washing machine. To determine the load capacity for each type of
laundry, refer to the chart on page 30.
• Make sure that laundry is not caught in the door, as this may cause a water leak.
• Washing detergent may remain in the front rubber part of the washer after a wash cycle.
Remove any remaining detergent, as they may cause a water leak.
• Do not touch the door glass while your washing machine is running or it may be hot.
• Do not open the detergent drawer or the debris filter while your washing machine is
running or you might be exposed to hot water or steam.
• Do not wash water-proofed items in normal cycle except outdoor care program.
2.
3.
4.
5.
Close the door until it latches.
Turn the power on.
Add detergent and additives to the dispenser drawer.
Select the appropriate cycle and options for the load.
The Wash Indicator light will illuminate and the estimated cycle time will appear in the display.
6. Press the Start/Pause button.
English - 19
ARNO_DC68-03038N-13_EN_151021.indd Sec5:19
2015-10-21
6:00:59
washing a load of laundry
USING THE CONTROL PANEL
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
9
10
10
11
12
13
11
12
13
Select the tumble pattern and spin speed for the cycle.
For detailed information, refer to “Washing clothes using the cycle
selector”. (see page 28)
1
Cycle Selector
Cotton - For average or lightly soiled cottons, bed linen, table linen,
underwear, towels, shirts, etc.
(Cotton, 40 ˚C water temperature, 2 rinses, Intensive, Bubble, 1400 rpm
spin is suitable for a normally soiled cotton load. Energy and water
labelling test programme in accordance with AS/NZS 2040.)
Synthetics - For averagely or lightly soiled blouses, shirts, etc., made
of polyester (diolen, trevira), polyamide (perlon, nylon) or other similar
blends.
Denim - A high water level in the main wash and extra rinse to help
ensure that little washing powder remains that may mark your clothing.
Bedding - For bed spread, bed sheet, Bedding cover etc.
Wash under 2.5 kg and only 1 kind of Bedding to achieve the best
result.
Dark Garment - Additional rinses and reduced spinning ensure that your
favourite dark clothes are washed gently and rinsed thoroughly.
Daily Wash - Use for everyday items such as underwear and shirts.
Drum Clean - Use for drum cleaning. It helps to cleans dirt and bacteria
of drum. Regular use (after every 40 washes) is recommended. No
detergent or bleach needed.
Intensive Cold - Low temperature Bubble.
Outdoor Care - Use for outdoor wear such as mountain clothes,
skiwear, and sports wear. Fabrics include functional technology finishes
and fibers such as spandex, stretch, and micro-fiber.
Baby Care - High temperature wash and extra rinses helps ensure that
little washing powder should remain to mark your thin clothes.
English - 20
ARNO_DC68-03038N-13_EN_151021.indd Sec5:20
2015-10-21
6:01:00
2
Lcd Display / Digital
Graphic Display
Displays the remaining wash cycle time, all cycle information, and error
messages.
3
Temp
Press this button repeatedly to cycle through the available water
temperature options: (Cold Water , 20 ˚C, 30 ˚C, 40 ˚C, 60 ˚C and 95 ˚C).
4
Rinse
Press this button to add additional rinse cycles. The maximum number
of rinse cycles is five.
03 WASHING A LOAD OF LAUNDRY
Wool
- Only for machine-washable wool. A load should be less than
2.0 kg.
• The wool course washes the laundry using gentle cradling actions.
During the wash, the gentle cradling and soaking actions are
continued to protect the wool fibers from shrinkage / distortion and
for a super gentle clean. This stop operation is not a problem.
• Neutral detergent is recommended for wool course, for improved
washing results and for improved care of the wool fibers.
Hand Wash - A very light wash cycle as gentle as a hand wash.
Spin - Performs an additional spin cycle to remove more water.
Rinse + Spin - Use for a load that needs rinsing only or to add rinseadded fabric softener to a load.
Press the button repeatedly to cycle through the available speeds for the
spin cycle.
WF1104
5
6
Spin
Option
,
, 400, 800, 1000, 1200, 1400 rpm
“No spin ” - The laundry remains in the drum and no spin cycle is
performed after the final drain.
“Rinse Hold
” - The laundry remains soaking in the final rinse water.
Before the laundry can be unloaded, either a Drain or Spin cycle must be
performed.
Press this button repeatedly to cycle through the options:
Soak  Intensive  Prewash  Soak + Intensive  Soak + Prewash 
Intensive + Prewash  Soak + Intensive + Prewash  off
“Prewash
”: Press this button to select pre-wash.
Pre-wash is only available with: Cotton, Synthetics, Denim, Bedding,
Dark Garment, Daily Wash, Intensive Cold, Baby Care.
“Soak
”: Use this option to effectively remove stains from your laundry
by soaking your laundry.
• The Soak function is performed 13 minutes into the wash cycle.
• The Soak function continues for 30 minutes with six cycles, where one
cycle is a soak cycle that spins for 1 minute and stands still for 4 minutes.
• The Soak function is only available for the following wash programs:
Cotton, Synthetics, Denim, Bedding, Daily Wash, Intensive Cold,
Baby Care.
“Intensive
”: Press this button when the laundry is heavily soiled and
needs to be washed intensively. The cycle time is increased for each cycle.
English - 21
ARNO_DC68-03038N-13_EN_151021.indd Sec5:21
2015-10-21
6:01:00
washing a load of laundry
7
8
9
Bubble
Bubble selection is turned on as a default. Press the Bubble option
button once to deselect and the Bubble Generator OFF (shown on the
panel), press it again to turn the function back ON.
• Some wash cycles must have Bubble option ON (will show on the
panel, and the Generator will turn on automatically).
• Other wash cycles do not need this option and automatically turn the
Generator OFF.
• On many cycles, you can manually adjust this option, which will
visibly affect wash time on the panel to achieve results (please see
page 27 for more information).
Easy Iron
Press this button to prepare your laundry so that it can be easily ironed by
reducing the wrinkles during the spin cycle.
• Easy Iron is only available for the following wash programs: Cotton,
Synthetics, Denim, Bedding, Dark garment, Daily wash, Intensive
Cold, Baby Care.
• When Easy Iron is selected, you can set the spin cycle speed up
to 800 rpm. (If you select Easy Iron with a spin cycle speed set to
higher than 800 rpm, the spinning speed is automatically changed to
800 rpm.)
Quick Wash
For lightly soiled garments and less than 2kg laundry that you require
quickly. It takes about minimum 15 minute, but can vary from the
indicated values depending on water pressure, water hardness, water
inlet temperature, room temperature, type and amount of washing and
degree of soiling, utilized detergent unbalaced load, fluctuation in the
electricity supply and extra options selected.
• Press this button repeatedly to choose cycle time: 15min  20min 
30min  40min  50min  1hr  Off
WARNING
Powdered/Liquid detergent should be under 20g(for 2kg load) or
detergent may remain on the clothes.
10
Delay End
Press this button repeatedly to cycle through the available Delay End
options (from 3 hours to 19 hours in one hour increments).
The hour displayed indicates the time when the wash cycle will be finished.
11
Start/Pause
Press to pause and restart a cycle.
12
My Cycle
Choose your favorite cycle including temperature, spin, soil level, option, etc.
13
Power
Press it once to turn your washing machine on, press it again to turn
your washing machine off.
If the washing machine is left on for more than 10 minutes without any
buttons being touched, the power automatically turns off.
English - 22
ARNO_DC68-03038N-13_EN_151021.indd Sec5:22
2015-10-21
6:01:00
Child Lock
The Child Lock function allows you to lock the buttons so that the wash cycle you’ve chosen
can’t be changed.
Activating/Deactivating
When the Child Lock function is activated, only the Power button works. The Child Lock
function remains on even after the power is turned on and off or after the disconnecting and
reconnecting the power cord.
3 sec.
3 sec.
Sound Off
The Sound Off function can be selected during all courses. When this function is selected, sound is
turned off for all courses. Even if the power is turned on and off repeatedly, the setting is retained.
Activating/Deactivating
If you want to activate or deactivate the Sound Off function, press the Spin and Option buttons
at the same time for 3 seconds. The “Sound Off ” will be lit when this feature is activated.
3 sec.
3 sec.
English - 23
ARNO_DC68-03038N-13_EN_151021.indd Sec5:23
2015-10-21
6:01:01
03 WASHING A LOAD OF LAUNDRY
If you want to activate or deactivate the Child Lock function, press the Temp and Rinse buttons
at the same time for 3 seconds. “Child Lock ” will be lit when this feature is activated.
washing a load of laundry
Delay End
You can set the washing machine to finish your wash automatically at a later time, choosing a
delay of between 3 to 19 hours (in 1 hour increments). The hour displayed indicates the time at
which the wash will be finished.
1. Manually or automatically set your washing machine according to the type of laundry you are
washing.
2. Press the Delay End button repeatedly until the delay time is set.
3. Press the Start/Pause button. The “Delay End ” indicator will be lit, and the clock will
begin counting down until it reaches the set time.
4. To cancel a Delay End function, press the Power button and then turn the washing machine
on again.
My Cycle
Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one button
convenience.
By pushing the My Cycle button, press the My Cycle button to load and use the saved My
Cycle options. The “My Cycle” light will indicate activation. Also, the chosen course and option
lights will flicker.
You can set all options as follows in the My Cycle mode.
1. Turn the water supply on.
2. Press the Power button.
3. Select cycle using the Cycle Selector.
4. After cycle selection, set each option.
See the “Cycle Chart” on page 39 for available option settings with each cycle.
5. You can then store the selected cycle and options by pressing and holding the My Cycle
button for longer than 3 seconds in My Cycle mode. The cycle and options you select will be
displayed the next time you choose the My Cycle function.
You can change the My Cycle settings by repeating the same process above.
The last used setting will be displayed the next time you choose the My Cycle function.
If you press My Cycle and release it within 3 seconds, the previously saved course and
options appear. If you press and hold My Cycle for 3 second or longer, the currently set
course and options are saved and the LED blinks for 3 seconds.
English - 24
ARNO_DC68-03038N-13_EN_151021.indd Sec5:24
2015-10-21
6:01:01
Bubble
The bubble function is available in all courses except for Drum Clean course and the
function availability is as follows.
Bubble function
Canceling the bubble function
Intensive Cold, Outdoor Care,
, Hand Wash
Baby Care, Wool
Drum Clean
•
03 WASHING A LOAD OF LAUNDRY
Course
Cotton, Synthetics, Denim, Bedding,
Dark Garment, Daily Wash
Available
Available
Not available
Not available
-
A different bubble function may be applied depending the course.
Bubble selection is default. Press it once to deselect bubble option, press it again to
select bubble option.
1.
2.
3.
4.
Open the door, place the laundry inside the wash tub and close the door.
Press the Power button.
Select a function.
Place the appropriate amount of detergent and fabric
softener into the corresponding compartments depending
on the amount of laundry and close the detergent drawer.
• Add the appropriate amount of detergent into the
detergent compartment , and add the fabric softener
to softener compartment
just under the fiber softener
base line (MAX) of “A”).
• When the Prewash course is selected, add detergent
into the prewash compartment
as well.
• To use liquid detergent, leave the liquid detergent box in
the drawer(refer to “Liquid Detergent” section on page 31).
Do not add powdered detergent into the liquid detergent box.
5. Press the Start/Pause button.
• Press the Start/Pause button to start the wash.
• The amount of the laundry is automatically detected and the laundry is washed.
• Once a washing machine operation begins, you cannot add or select the bubble function.
• Enough bubbles are generated with the specified amount of detergent.
• Please clean the debris filter frequently. Periodic cleaning helps generate sufficient
bubbles.
• Depending on the detergent and the laundry, the bubbles may be absorbed and seem
like a small quantity.
• Although bubbles are generated once the wash begins, it may take several minutes for
users to see them.
English - 25
ARNO_DC68-03038N-13_EN_151021.indd Sec5:25
2015-10-21
6:01:02
washing a load of laundry
Washing clothes using the cycle selector
Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Control”
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1. Turn on your sink’s water tap.
2. Press the Power button.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling it.
5. Close the door.
6. Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate
compartments.
Pre-wash is only available when selecting the Cotton, Synthetics, Denim, Bedding, Dark
Garment, Daily Wash, Intensive Cold, Baby care cycles. It is only necessary if your clothing
is heavily soiled.
7. Use the Cycle Selector to select the appropriate cycle according to the type of material:
Cotton, Synthetics, Denim, Bedding, Dark Garment, Daily Wash, Intensive Cold, Outdoor Care,
Baby Care, Wool
, Hand Wash. The relevant indicators will illuminate on the control panel.
8. At this time, you can control the wash temperature, the amount of rinses, the spinning
speed, and the delay time by pressing the appropriate option button.
9. Press the Start/Pause button and the wash will begin. The process indicator will light up
and the remaining time for the cycle will appear in the display.
Pause Option
Within 5 minutes of starting a wash, it is possible to add/remove laundry items.
1. Press the Start/Pause button to unlock the door.
The door cannot be opened when the water is too HOT or the water level is too HIGH.
2. After closing the door, press the Start/Pause button to restart the wash.
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1. Open the door.
2. Remove laundry.
English - 26
ARNO_DC68-03038N-13_EN_151021.indd Sec5:26
2015-10-21
6:01:02
Washing clothes manually
LAUNDRY GUIDELINES
Follow these simple guidelines for the cleanest laundry and the most efficient wash.
Always check the Care label on clothing before washing.
Sort and wash your laundry according to the following criteria:
• Care Label: Sort laundry into cottons, mixed fibres, synthetics, silks, wools and rayons.
• Colour: Divide whites and colours. Wash new colour items separately.
• Size: Placing items of different sizes in the same load will improve the wash action.
• Sensitivity: Wash delicate items separately, using the Delicate wash cycle for pure, new
woollen items, curtains and silk articles. Check the labels on the items you are washing or
refer to the fabric care chart in the appendix.
Emptying pockets
Before each wash, empty all the pockets of your laundry. Small, irregularly shaped hard objects,
such as coins, knives, pins, and paperclips could damage your washing machine. Do not wash
clothing with large buckles, buttons, or other heavy metal objects.
Metal on clothing may damage your clothing as well as the tub. Turn clothing with buttons and
embroidered clothes inside out before washing them. If zips of pants and jackets are open while
washing, the spin basket may be damaged. Zips should be closed and fixed with a string before
washing.
Clothing with long strings may become entangled with other clothes damaging them. Be sure to
fix the strings before starting the wash.
Prewashing cotton
Your new washing machine, combined with modern detergents, will give perfect washing results,
thus saving energy, time, water and detergent. However, if your cotton is particularly dirty,
prewash with a protein-based detergent.
English - 27
ARNO_DC68-03038N-13_EN_151021.indd Sec5:27
2015-10-21
6:01:02
03 WASHING A LOAD OF LAUNDRY
You can wash clothes manually without using the Cycle Selector.
1. Turn the water supply on.
2. Press the Power button on the washing machine.
3. Open the door.
4. Load the articles loosely into the drum one at a time, without overfilling it.
5. Close the door.
6. Add detergent and, if necessary, softener or prewash detergent, into the appropriate
compartments.
7. Press the Temp button to select the temperature. (Cold water, 20 ˚C, 30 ˚C, 40 ˚C, 60 ˚C, 95
˚C)
8. Press the Rinse button to select the required number of rinse cycles.
The maximum number of rinse cycles is five.
The wash duration is increased accordingly.
9. Press the Spin button to select the spin speed.(
: No Spin)
10. Press the Delay End button repeatedly to cycle through the available Delay End options
(from 3 hour to 19 hours in one hour increments). The hour displayed indicates the time at
which the wash will be finished.
11. Press the Start/Pause button and the machine will begin the cycle.
washing a load of laundry
Determining the load capacity
Do not overload the washing machine or your laundry may not wash properly. Use the chart
below to determine the load capacity for the type of laundry you are washing.
Fabric Type
Load Capacity
Model
WF1104
Cotton
- average/lightly soiled
- heavily soiled
10.0 kg
Synthetics
5.0 kg
Denim
3.0 kg
Bedding
2.5 kg
Outdoor Care
2.0 kg
Wool
2.0 kg
• When the laundry is unbalanced (“UE” lights up on the display), redistribute the load.
If the laundry is unbalanced, the spin efficiency may be degraded.
• When washing Bedding or Bedding cover, the wash time may be lengthened or the spin
efficiency may be degraded.
• For Bedding or Bedding cover, the recommended load capacity is 2.5 kg or less.
Make sure to insert brassieres (water washable) into a laundry net (to be
purchased additionally).
• The metal parts of the brassieres may break through the material
and damage the laundry. Therefore make sure to place them inside
a fine laundry net.
• Small, light clothing such as socks, gloves, stockings and
handkerchiefs may become caught around the door. Place them
inside a fine laundry net.
CAUTION
Do not wash the laundry net by itself without other laundry. This may cause abnormal
vibrations that could move the washing machine and cause an accident resulting in
injury.
DETERGENT AND ADDITIVES INFORMATION
Which detergent to use
The type of detergent you should use is based on the type of fabric (cotton, synthetic, delicate
items, wool), colour, wash temperature, and degree of soiling. Always use “low suds” laundry
detergent, which is designed for automatic washing machines.
Follow the detergent manufacturer’s recommendations based on the weight of the laundry, the
degree of soiling, and the hardness of the water in your area. If you do not know how hard your
water is, enquire at your local water authority.
Do not use detergent that has hardended or solidified as the detergent may remain in
the rinse cycle. It may cause your washing machine to not rinse properly or result in the
overflow becoming blocked.
Powdered detergent should be thoroughly dissolved in a small amount of warm water
before adding to the machine.
English - 28
ARNO_DC68-03038N-13_EN_151021.indd Sec5:28
2015-10-21
6:01:02
Detergent drawer
Your washing machine has separate compartments for dispensing detergent and fabric softener.
Add all laundry additives to the correct compartment before starting your washing machine.
Do not open the detergent drawer while your washing machine is running or you might be
exposed to hot water or steam.
03 WASHING A LOAD OF LAUNDRY
1. Pull out the detergent drawer on the left side of the control
panel.
2. Add the recommended amount of laundry detergent
before starting
directly into the detergent compartment
your washing machine.
To use liquid detergent, use the liquid detergent box (refer
to “Liquid Detergent” for the corresponding model).
•
Do not add powdered detergent into the liquid detergent box.
3. Add the recommended amount of fabric softener into the
softener compartment
if required. DO NOT exceed the
MAX FILL ( ) line.
CAUTION
Do NOT add any powder/liquid detergent to the softener
compartment ( ).
4. When using the Prewash option, add the recommended
amount of laundry detergent into the prewash
compartment .
When washing large items do NOT use the following
detergetnt types.
• Tablet and capsule type detergents
• Detergents using a ball and net
MAX
concentrated or thick fabric softener and conditioner
must be diluted with a little water before being poured
into the dispenser (prevents the overflow from being
blocked and avoids risk of clothing being stained).
Be careful that the fabric softener does not overflow, when you close the detergent drawer
after adding fabric softener into the rinse detergent compartment.
Liquid Detergent (Selected models)
To use liquid detergent, place the liquid detergent box into the main wash section of the
detergent drawer and pour liquid detergent into the liquid detergent box.
• DO NOT fill above the MAX line.
Liquid
• When using powdered detergent, remove the liquid
detergent box
detergent box from the detergent drawer. Powdered
detergent will not dispense with liquid detergent box.
• After a wash, some liquid may remain in the detergent
drawer.
English - 29
ARNO_DC68-03038N-13_EN_151021.indd Sec5:29
2015-10-21
6:01:02
cleaning and maintaining your
washing machine
Keep your washing machine clean.
DRUM CLEAN
This course is a self-cleaning course that helps to remove mould that may occur inside the washing
machine.
1. Press the Power button.
2. Turn the Cycle Selector to the Drum Clean course.
• You can only use the Delay End function.
• The water temperature during the Drum Clean is set to
70 ˚C.
You cannot change the temperature.
3. Place the appropriate amount of cleansing agent into the
detergent compartment
and close the detergent drawer
(when cleaning the drum using a cleansing agent).
• Be sure to use the recommended cleansing agent for
cleaning the drum.
• There are powder-type and liquid-type drum cleansing
agents. The liquid-type cleaning agent is only available
with liquid detergent box (option).
4. Press the Start/Pause button.
• If you press the Start/Pause button, the Drum Clean course begins.
CAUTION
•
•
•
•
•
•
•
Using the Drum Clean course, you can clean the drum without using a cleansing agent.
Never use the Drum Clean course when laundry is in the washing machine. This may result in
damage to the texture or a problem with the washing machine.
In the Drum Clean course, never use normal detergent.
Use only 1/10 of the amount of the drum cleansing agent recommended by the
cleansing agent manufacturer.
Since using a chlorine bleaching agent may discolour the product, be sure to use only
oxygen bleaching agents.
Powder-type cleansing agent: Use a [powder-type bleaching agent] or a [cleansing agent for
drum cleaning only].
Liquid-type cleansing agent: Use a [liquid-type oxygen bleaching agent] or a [cleansing agent
for drum cleaning only].
English - 30
ARNO_DC68-03038N-13_EN_151021.indd Sec6:30
2015-10-21
6:01:03
04 CLEANING AND MAINTAINING
The Drum Clean Auto Alarm Function
• If the “Drum Clean” indicator on the display and the lamp on
the Cycle Selector are lit after a wash, it indicates that tub
(drum) cleaning is required. In this case, remove the laundry
from the washing machine, turn the power on, and clean the
drum by performing the Drum Clean course.
• If you do not perform the Drum Clean course, the “Drum
Clean” indicator on the display and the lamp on the Cycle
Selector are turned off. However, the “Drum Clean” indicator
on the display and the lamp on the Cycle Selector are turned
on again after two washes are performed. However, this will
not result in a problem with the washing machine.
• Although generally, the Drum Clean Auto Alarm appears once
a month or so, the frequency may differ depending on the
number of times the washing machine is used.
• In case of the alarm, please also clean the debris filter
(refer to “Cleaning the debris filter” section on page 34).
Otherwise the performance of the bubble function may
lower down.
DRAINING THE WASHING MACHINE IN AN EMERGENCY
If there is a power outage, drain all remaining water before removing your laundry.
1. Unplug the washing machine from the power supply.
2. Open the filter cover by using a coin or key.
Filter cover
3. Open the emergency drain cap by pulling it.
Emergency
drain cap
4. Hold the cap on the end of the emergency drain tube and
slowly pull it out.
5. Allow all the water to flow into a bowl.
Emergency
drain tube
Remain water maybe more than you expected. Prepare
larger bowl.
6. Reinsert the emergency drain cap and the drain tube.
7. Replace the filter-cover.
English - 31
ARNO_DC68-03038N-13_EN_151021.indd Sec6:31
2015-10-21
6:01:03
cleaning and maintaining your
washing machine
CLEANING THE DEBRIS FILTER
We recommend cleaning the debris filter 5 or 6 times a year, or when the error message of “5E” is
displayed. (Refer to “Draining the washing machine in an emergency” in the previous section.)
If foreign substances accumulate debris filter, the performance of the bubble function will be degraded.
Before cleaning the debris filter, make sure to unplug the power cord.
CAUTION
1. Remove the remaining water first (refer to “Draining the
washing machine in an emergency” on page 33.)
If you separate the filter without draining the remaining
water, the remaining water may trickle out.
2. Open the filter cover by using a key or coin.
3. Unscrew the emergency drain cap by turning it to the left
and drain off all the water.
4. Unscrew the debris filter cap.
Debris filter cap
5. Wash any dirt or other material from the debris filter. Make
sure the drain pump propeller behind the debris filter is not
blocked.
6. Replace the debris filter cap.
7. Replace the filter cover.
CAUTION
Do not open the debris filter cap while the machine is running or hot
water may flow out.
•
Make sure to replace the filter cap after the filter cleaning. If the filter is out of the machine, your
washing machine may malfunction or leak water.
•
The filter should be fully assembled after the filter cleaning.
For models with the safety filter cap
• To open, push in, and then turn the safety filter cap counterclockwise.
The spring in the cap will make opening the cap easy.
• To close, turn the safety filter cap clockwise. As you turn the cap, the
spring will make a rattling sound. The rattling sound is normal.
CLEANING THE EXTERIOR
1. Wipe the washing machine surfaces, including the control panel, with a soft cloth using a
nonabrasive household detergent.
2. Use a soft cloth to dry the surfaces.
3. Do not pour water onto the washing machine.
English - 32
ARNO_DC68-03038N-13_EN_151021.indd Sec6:32
2015-10-21
6:01:04
CLEANING THE DETERGENT DRAWER AND DRAWER RECESS
Release lever
liquid detergent box (Option)
04 CLEANING AND MAINTAINING
1. Press the release lever on the inside of the
detergent drawer and pull the drawer out.
2. Remove the softener divider and the liquid
detergent box(option) from the detergent
drawer.
Softener divider
3. Wash all parts under running water.
4. Clean the drawer recess with an old toothbrush.
5. Replace the softener divider and the liquid detergent box
(option) by pushing it firmly into the drawer.
6. Push the drawer back into place.
7. To remove any remaining detergent, perform a rinse cycle
without any laundry in the drum.
CLEANING THE WATER HOSE MESH FILTER
You should clean the water hose mesh filter at least once a year, or when the error message of “4E” is
displayed:
1. Turn off the water supply to the washing machine.
2. Unscrew the hose from the back of the washing machine. To prevent water from gushing out
due to the air pressure in the hose, cover the hose with a cloth.
3. Gently pull out the mesh filter from the end of the hose using a pair of pliers and rinse it under
water until clean. Also clean inside and outside the threaded connector.
4. Push the filter back into place.
5. Screw the hose back onto the washing machine.
6. Make sure the connections are watertight and turn on the tap.
English - 33
ARNO_DC68-03038N-13_EN_151021.indd Sec6:33
2015-10-21
6:01:04
cleaning and maintaining your
washing machine
REPAIRING A FROZEN WASHING MACHINE
If the temperature drops below freezing and your washing machine is frozen:
1.
2.
3.
4.
5.
Unplug the washing machine.
Pour warm water over the tap to loosen the water supply hose.
Remove the water supply hose and soak it in warm water.
Pour warm water into the washing machine drum and let it sit for 10 minutes.
Reconnect the water supply hose to the water tap and check if the water supply and drain
are operating normal.
STORING YOUR WASHING MACHINE
If you need to store your washing machine for an extended time, it’s better to drain and disconnect it.
Washing machines can be damaged if water is left in the hoses and internal components before storage.
1. Select the Cotton cycle and push the Quick Wash button and run your washing machine
through the cycle without a load.
2. Turn the water taps off and disconnect the inlet hoses.
3. Unplug your washing machine from the electrical outlet, and leave your washing machine
door open to allow air to circulate inside the tumbler.
If your washing machine has been stored in below-freezing temperatures, allow time for any
leftover water in your washing machine to thaw out before using it.
English - 34
ARNO_DC68-03038N-13_EN_151021.indd Sec6:34
2015-10-21
6:01:05
troubleshooting and
information codes
CHECK THESE POINTS IF YOUR WASHING MACHINE...
05 TROUBLESHOOTING
PROBLEM
SOLUTION
Will not start
•
•
•
•
Make sure your washing machine is plugged in.
Make sure the door is firmly closed.
Make sure the water source tap(s) are turned on.
Make sure to press the Start/Pause button.
Has no water or not enough
water
•
•
•
•
Turn the water tap on fully.
Make sure the water source hose is not frozen.
Straighten the water intake hoses.
Clean the filter on the water intake hose.
Has detergent remaining in
the detergent drawer after
the wash cycle is complete
•
Make sure your washing machine is running with sufficient water
pressure.
Make sure the detergent is added to the center of the detergent
drawer.
Vibrates or is too noisy
•
•
•
•
•
Make sure your washing machine is on a level surface. If the surface
is not level, adjust the washing machine feet to level the appliance.
Make sure that the shipping bolts are removed.
Make sure your washing machine is not touching any other object.
Make sure the laundry load is balanced.
The washing machine does
not drain and/or spin
•
•
Straighten the drain hose. Eliminate kinked hoses.
Make sure the debris filter is not clogged.
Door is locked shut or will
not open.
•
The door will not open until 3 minutes after the machine stops or the
power turns off.
If the problem persists, contact your local Samsung Customer Service.
English - 35
ARNO_DC68-03038N-13_EN_151021.indd Sec11:35
2015-10-21
6:01:05
troubleshooting and
information codes
INFORMATION CODES
If your washing machine malfunctions, you may see an information code on the display. If this happens,
please check the table below and try the suggested solution before calling Customer Service.
CODE SYMBOL
SOLUTION
dE
•
•
Make sure the door is firmly closed.
Make sure that laundry is not caught in the door.
4E
•
•
•
Make sure the source water tap is turned on.
Check the water pressure.
Clean the mesh filters of water hose.
5E
•
•
•
Clean the debris filter.
Make sure the drainage hose is installed correctly.
Clean the water hose mesh filter.
•
The laundry load is unbalanced. Redistribute the load. If only one item
of clothing needs washing, such as a bathrobe or pair of jeans, the
final spin result might be unsatisfactory and an “UE” error message
will be shown in the display window.
•
Call the after-sales service.
UE
cE/3E/Uc
For any codes not listed above, or if the suggested solution doesn’t fix the problem, call your Samsung
Service Centre or local Samsung dealer.
calibrating your washing
machine
CALIBRATION MODE
Samsung washing machine detects the laundry weight automatically. For more accurate weight detection,
please run Calibration Mode after the installation. Calibration mode is done by following the steps below.
1. Remove laundry or any contents in the machine and turn off the machine.
2. Press the Temp button and Delay End button simultaneously, and press the Power button in addition.
Then the machine turns on.
3. Press the Start button to activate “Calibration Mode”.
4. The drum rotates clockwise and counterclockwise approximately for 3 minutes.
5. When “Calibration Mode” is finished, “End/Cycle is complete” appears on the display, and the
machine automatically turns off. The washing machine is now ready for use.
English - 36
ARNO_DC68-03038N-13_EN_151021.indd Sec11:36
2015-10-21
6:01:05
cycle chart
CYCLE CHART
( user option)
DETERGENT
PROGRAM
Spin Speed(MAX) rpm
Max load(kg)
wash
Softener
Max Temp
(˚C)
WF1104
Cotton
10.0

yes

95
1400
Synthetics
5.0

yes

60
1200
800
Denim
3.0

yes

60
Bedding
2.5

yes

40
800
Dark Garment
6.0

yes

40
1200
1400
Daily Wash
3.0

yes

60
Drum Clean
-
-
-
-
70
400
Intensive Cold
6.0

yes

40
1200
Outdoor Care
2.0
-
yes

40
1200
Baby Care
6.0

yes

95
1400
Wool
06 CYCLE CHART
Pre-wash
2.0
-
yes

40
800
Hand Wash
2.0
-
yes

40
400
PROGRAM
Bubble
Delay End
Easy Iron
Intensive
Soak
Quick Wash
Cycle time
(min)
Cotton






138
Synthetics





-
77
Denim





-
64
Bedding





-
93
Dark Garment




-
-
69
Daily Wash





-
52
Drum Clean
-

-
-
-
-
101
Intensive Cold





-
110
Outdoor Care


-
-
-
-
74
Baby Care





-
128
Wool


-
-
-
-
53


-
-
-
-
29
Hand Wash
1. A cycle with a prewash takes approx. 17 minutes longer.
2. The cycle duration data has been measured under the conditions specified in Standard IEC 60456 / EN
60456.
3. Cotton 40˚C/60˚C + intensive + Bubble are programs according to EN60456.
4. Daily Wash : Short program for test institutes.
5. Course time in individual homes may differ from the values given in the table due to variations in the
pressure and temperature of the water supply, the load and the type of laundry.
6. When the Intensive Wash function is selected, the cycle time is increased for each cycle.
English - 37
ARNO_DC68-03038N-13_EN_151021.indd Sec8:37
2015-10-21
6:01:05
appendix
FABRIC CARE CHART
The following symbols provide garment care directions. The care labels include four symbols in this order:
washing, bleaching, drying and ironing (and dry cleaning when necessary). The use of symbols ensures
consistency among garment manufacturers of domestic and imported items. Follow the care label
directions to maximize garment life and reduce laundery problems.
Resistant material
Can be ironed at 100 ˚C max
Delicate fabric
Do not iron
Item may be washed at 95 ˚C
Can be dry cleaned using any
solvent
Item may be washed at 60 ˚C
Dry clean with perchloride, lighter
fuel, pure alcohol or R113 only
Item may be washed at 40 ˚C
Dry clean with aviation fuel, pure
alcohol or R113 only
Item may be washed at 30 ˚C
Do not dry clean
Item may be hand washed
Dry flat
Dry clean only
Can be hung to dry
Can be bleached in cold water
Dry on clothes hanger
Do not bleach
Tumble dry, normal heat
Can be ironed at 200 ˚C max
Tumble dry, reduced heat
Can be ironed at 150 ˚C max
Do not tumble dry
PROTECTING THE ENVIRONMENT
•
•
•
•
This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance,
please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be
connected to a power source. Remove the door so that animals and small children cannot get trapped
inside the appliance.
Do not exceed the detergent quantities recommended in the detergent manufactures’ instructions.
Use stain removal products and bleaches before the wash cycle only when strictly necessary.
Save water and electricity by only washing full loads (the exact amount depends upon the program
used).
English - 38
ARNO_DC68-03038N-13_EN_151021.indd Sec9:38
2015-10-21
6:01:05
SPECIFICATIONS
TYPE
FRONT LOADING WASHING MACHINE
WF1104XA/ WF1104XB
WF1104ZA/ WF1104ZB
DIMENSIONS
W600×D600×H850(mm)
WATER PRESSURE
50 kPa ~ 800 kPa
NET WEIGHT
71 kg
WASH AND SPIN CAPACITY
10.0 kg
220 V
150 W
WASHING
POWER
CONSUMPTION
SPIN
REVOLUTIONS
07 APPENDIX
MODEL NAME
240 V
150 W
WASH AND
HEATING
220 V
2000 W
240 V
2400 W
SPIN
230V
300 W
PUMPING
30 W
rpm
1400
The appearance and specifications of the product are subject to change without prior notice for purposes
of product enhancement.
English - 39
ARNO_DC68-03038N-13_EN_151021.indd Sec9:39
2015-10-21
6:01:06
QUESTIONS OR COMMENTS?
Country
CALL
OR VISIT US ONLINE AT
AUSTRALIA
1300 362 603
www.samsung.com/au/support
DC68-03038N-13
ARNO_DC68-03038N-13_EN_151021.indd Sec9:40
2015-10-21
6:01:06