Product Data Sheet ACI5005 Stand-Alone Keypad for One-Door Control. Controller Built-In Robust design The electronics are mounted in an aluminium housing which is designed to resist weather and vandalism. It is suitable for all kinds of environments, indoors or outdoors, and has a built-in heater to keep the unit ice-free. If the keypad is opened or removed from the wall, a tamper contact will transmit an alarm to any external alarm system. Built-in buzzer The unit has a built-in buzzer that will activate when the door is held open too long. The buzzer can be set to operate according to a time schedule. Programming The keypad is simple to program and use. Enter new code simply by accessing programming mode and typing the new code. Delete a code by entering the code number on the keypad. Other features (time schedules and print-outs) can be loaded via the hand-held programmer. Expansion The keypad can be connected to a controller and will work as a 'slave keypad' when the demand for security increases. In this mode, the electronics to release the door will be in a secure area in the controller. The keypad can be connected to other keypads and/or controllers and can be programmed from a personal computer via the application software. Functionality The keypad can be used to: - Open a door for valid code during certain hours. - Arm/disarm an intruder alarm system The keypad has three LED indications to give the user information about the status of the system. The security level can be chosen for each individual reader : 1. Door open - unlocked 2. code to access Memory The reader has a built-in memory for : - 1289 personal codes - 100 time schedules - 250 card groups (user groups) - 500 'last' events, which can be printed out using the hand-held programmer. Standard Features ACI5005 Stand-Alone Keypad for One-Door Control. Controller Built-In Specifications Supply voltage Current consumption 12 VDC 24 VDC Outputs Inputs Operating temperature Programming Ordering Information 12 to 24 VDC 60 mA 40 mA Lock relay (free switching relay C/NC/NO) Request to exit device -20 °C to +50 °C Via keypad Via handheld programmer As a company of innovation, UTC Fire & Security reserves the right to change product specifications without notice. For the latest product specifications, visit UTC Fire & Security online or contact your sales representative. ACI5005-2018-03-23 18:05:27 Released :04-OCT-17 Part No. Description ACI5005 Stand-Alone Keypad for One-Door Control. Controller Built-In ACA000 Transparent Plexiglass Rain Protection Hood ACA001 Request to Exit Button Surface Mounted ACP111 Hand-Held Programmer - Also Acts As Printer Interface.