5715111851_00/11.14
www.delonghi.com
made in China -
Instructions for use
Keep these instructions
Mode d’emploi
Conservez cette notice
Instrucciones de uso
Repase y guarde estas instrucciones
Lea cuidadosamente este instructivo
antes de usar su aparato
Register this product online
Visit www.delonghiregistration.com
Visit www.delonghi.com for a list of
service centers near you.
PORTABLE AIR CONDITIONER
CONDITIONNEUR D’AIR PORTATIF
SISTEMA DE AIRE
ACONDICIONADO PORTÁTIL
PAC AN130ES
Para registrar su producto en línea
Visite www.delonghiregistration.com
Visite www.delonghi.com para ver la lista
de centros de servicios cercanos a usted.
Enregistrez ce produit en ligne
Visit www.delonghiregistration.com
Visitez www.delonghi.com pour y voir
une liste des centres de réparation proches de chez vous.
Electrical Specifications - Données électriques -Especificaciones electricas
115 V∼ 60 Hz 10.8 A
Description
19
2
5
1
11
3
6
7
8
4
9
10
• ACCESSORIES • ACCESSOIRES
12
13
16
14
17
15
18
19
I m p o r t a n t s a f e g u a rd s
• Use this appliance only as described in this instruction manual.
As with any electrical appliance, the instructions aim to cover as many situations as
possible. Caution and common sense should be used when operating and installing
this air conditioner.
• This appliance has been manufactured to cool and dehumidify domestic environments and must not be used for other purposes.
• It is dangerous to alter or modify the unit's characteristics in any way.
• The appliance must be installed in accordance with the relevant national legislation.
• Should repairs be necessary, contact the nearest authorized Repair Service Center.
Unauthorized servicing can be dangerous.
• The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
• In the case that the power cord becomes damaged, this must be repaired only by specialized personnel authorized by the manufacturer in order to protect against fire.
• Always ensure the appliance is plugged into a grounded 3-prong outlet. If you have any
doubts check with a qualified electrician.
• We strongly discourage the use of an extension cord due to potential safety hazards.
• Before cleaning or maintenance operations, always unplug the unit from the outlet.
• Do not pull on or place strain on the power cord when moving the appliance.
• The appliance should not be installed where the atmosphere may contain combustible gases, oil or sulphur, or near heat sources.
• Do not rest hot or heavy objects on the appliance.
• Clean the filters at least once a week.
• Avoid using heaters near the unit.
• The unit should be transported in a vertical position. If this is not possible secure the
unit at an angle, do not lie it horizontally.
• Before transporting the unit, drain the unit. After transportation, wait at least 6 hours
before switching the unit on.
• The packaging materials can be recycled. You are therefore recommended to
place them in the special containers for differentiated waste collection.
• This appliance is fitted with a special safety device. When the compressor switches
off, this device prevents it from switching on again for at least 3 minutes.
• WARNING: Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
SAVE THESE INSTRUCTIONS
THIS PRODUCT IS FOR HOUSEHOLD ONLY
4
Pre p a r i n g f o r u s e
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
air outlet grille
control panel
handles
castors
filter
air intake grille
air exhaust hose housing
air intake grille
power cable
drainage with 2 caps
remote control compartment
wall flange with cap
air exhaust hose
hose adaptor
accessory for wall mounting
window bracket with pins
additional window bracket
window outlet
remote control
ELECTRICAL CONNECTIONS
Before plugging the appliance into the electrical receptacle, check that:
• The outlet’s power supply corresponds to the value indicated on the rating label on the back
of the appliance;
• The outlet and electrical circuit are adequate for the appliance;
• The outlet is a 3-hole grounded outlet
. If this is not the case, you must choose another outlet.
Failure to follow these important safety instructions absolves the manufacturer of all liability.
The power cable must be replaced by a qualified professional only.
The instructions below will enable you to prepare your air conditioner for operation as efficiently
as possible.
Before use, make sure the air intake and outlet grilles are unobstructed.
AIR-CONDITIONING WITHOUT INSTALLATION
Just a few simple steps and your comfort is
ensured with your air conditioner:
• Screw the hose adaptor
end 13 .
1
14 to the hose’s
2
• Fit the air exhaust hose in the housing at
the back of the appliance. Insert it as
shown in figure A. Be sure it is properly
fixed (check by pulling lightly the hose).
B
Sash window
• Open the window.
• Place the window bracket 16 in the window, extending it to fit the width of the
window (fig. C).
• Place the air conditioner near the window. Insert the assembled exhaust hose
A
• Screw the window outlet 18 to the other
end of the exhaust hose. (see fig. B).
13 into the window bracket hole 16 .
• Make sure the air exhaust hose is unobstructed.
• If you have a very large window, in order
to cover your window aperture, use the
additional window bracket without holes
17 , extending it to the desired dimen5
Pre p a r i n g f o r u s e
sion, then fix the bracket by using the
locking pin provided. When extracting the
window bracket and joining the two
pieces pay attention you do not cover the
hole.
E
Keep the air hoses as short and free of
curves as possible to avoid bottlenecks.
C
Other set-up methods:
• Thanks to the locking pin, it’s possible to
use the window bracket also for sliding
windows. Position the hole of the bracket
so to allow a correct installation of the
exhaust hose (see figure D).
SEMI-PERMANENT INSTALLATION
If required, your appliance can also be
installed semi-permanently (Fig. F).
12 inch
es
30 cm
D
Keep the air hoses as short and free of
curves as possible to avoid constrictions.
French window
• After having screwed the window outlet
18 into the air exhaust hose 13 , open
the French window slightly and position
the window outlet 18 as shown in figure
E.
6
s
he
inc
12 0 cm
3
F
Proceed as follows:
• Drill a hole (ø134 mm / 5.27 in.) in an outside wall or through a window pane.
Respect the height and dimensions of the
hole given in figures F and G.
NOTE: As special tools are required for installation, we suggest you have the appliance
installed by specialized personnel.
Pre p a r i n g f o r u s e
When the hose 13 is not fitted, the hole can
5.27 inches
be closed with the flange cap
in the window
pane
in the wooden
kickboard of a
French window
G
12 .
NOTE: When installing the air conditioner
semi-permanently, you should leave a door
slightly open (as little as 1/2 inches -1 cm) to
guarantee correct ventilation.
in the wall: you are
recommended to
insulate the section
of wall using suitable insulation.
• Fit the wall flange 12 into the hole.
• Screw the hose adaptor
end 13 .
14 to the hose’s
• Fit the air exhaust hose in the housing at
the back of the appliance as shown in
figure A.
• Screw
the
wall mounting accessory
15
into the
2
13
hose
(fig. H) and fit
it into the
wall flange
as
12
shown in fig. I.
H
MAX 39 inches
MAX100 cm
MIN 14 inches
MIN 35 cm
I
7
Control panel
THE CONTROL PANEL
G
H
I
L
D
A
B
E
°C
°F
F
C
S
R Q
P
O N
M
DESCRIPTION OF THE CONTROL PANEL
A ON /OFF button
B MODE selection button
Air conditioning, dehumidifying, fan
C Decrease temperature/programmed operation time button
D Timer button
E Fan speed button (MAX/MED/MIN)
F Increase temperature/programmed operation time button
G Air conditioning symbol
H Dehumidifying symbol
I Fan symbol
L Alarm symbol
M Fan speed indicator
N Temperature scale indicator
O Time indicator
P Set temperatures, room temperature and programmed on/off time
Q Timer symbol
R Room temperature symbol
S Set temperature symbol.
8
Never turn the air conditioner off by unplugging from the outlet. Always press the
button, then wait for a few minutes before unplugging. This allows the appliance to perform a
cycle of checks to verify operation
Operation
Before plugging the appliance check: the caps on the back
of the unit are correctly inserted and screwed on the
drainage 10 .
TURNING THE APPLIANCE ON
Plug the appliance into the electrical receptacle. Two lines
appear on the display indicating that the appliance is in stand-by.
Press the
button (A).
The first time the appliance is turned on, it will be in air conditioning mode. Room temperature will be displayed and fan speed
will be at minimum. When turned on subsequently it will be in the
same mode as when last turned off.
Press the MODE button (B) until the symbol corresponding to the
required mode is displayed:
Air conditioning symbol (G)
Dehumidifying symbol (H)
Fan symbol (I)
AIR CONDITIONING MODE
Ideal for hot muggy weather when you need to cool and dehumidify the room.
To set this function correctly:
• Press the MODE button a number of times until the air conditioning symbol appears. Room temperature is displayed.
• Select the target temperature by pressing the
button (F) or
button (C) until the required value is displayed.
During selection, the temperature flashes.
After 10 seconds, room temperature is displayed again.
• Select the required fan speed by pressing the
button.
There are 3 speeds available:
High speed: to achieve the target temperature as
rapidly as possible
°F
°F
Medium speed: reduces noise levels but still maintains a
good level of comfort
Low speed: for silent operation
The most suitable indoor temperature for the room during the
summer varies from 75 to 81°F (24°C to 27°C). You are recommended, however, not to set a temperature much below the
outdoor temperature.
DEHUMIDIFYING MODE
Ideal to reduce room humidity (spring and autumn, damp rooms,
rainy periods, etc). For this mode, the appliance should be prepared in the same way as for air conditioning, with the air exhaust
hose attached to enable the moisture to be discharged outside.
To set this function correctly:
• Press the MODE button a number of times until the dehumidifying symbol appears.
°F
9
Operation
NOTE: In this mode, with room temperature above 25 degree C,
the fan speed is adjustable. If the temperature is below, fan
speed is selected automatically by the appliance and cannot
be set manually.
°F
FAN MODE
When using the appliance in this mode, the air exhaust hose
does not need to be attached.
To set this function correctly:
• Press the MODE button a number of times until the fan symbol
appears.
• Select the required fan speed by pressing the
button.
There are 3 speeds available:
°F
High speed: for maximum fan power;
°
°F
Medium speed: reduces noise levels but still maintains a
good level of comfort;
Low speed: for silent operation.
PLEASE NOTE: To change the unit of measurement for the
displayed temperature, press the
and
buttons together for
3 seconds.
°F
SETTING THE TIMER
The timer can be used to delay when the appliance comes on
or goes off. This avoids wasting electricity by optimising operating
periods.
How to programme delay ON
• Plug the appliance into an electrical receptacle.
It will be in STAND-BY.
• Press the timer button (D). The timer symbol (Q) comes on.
• Use the
(F) or
(C) buttons to set the number of hours
delay before the appliance comes on. They increase or
decrease the time in steps of an hour.
The appliance can be set to come on within the next 24 hours.
Five seconds after the timer has been set, the display dims and
the setting is memorised.
NOTE: after setting, the operating mode and fan speed can be
modified.
To cancel the timer programme, press the timer button (D) again.
Pressing the ON/OFF button (A) cancels the timer programme
and the air conditioner comes on immediately in the selected
mode.
10
°C
Setting the timer
How to programme delay OFF
• Delay OFF can be programmed in any operating mode:
air conditioning/dehumidifying/fan.
• Press the timer button (D). The timer on symbol (Q) comes on.
• Use the
(F) or
(C) buttons to set the number of hours
delay before the appliance goes off.
They increase or decrease the time in steps of an hour.
The appliance can be set to go off within the next 24 hours.
Five seconds after the timer has been set, the operating mode is
displayed and the timer symbol remains on.
At the set time, the air conditioner goes off and remains in standby.
To cancel the timer programme, press the timer button (D)
again. The timer symbol goes off.
°F
PLEASE NOTE: after setting, the operating mode and fan speed
can be modified.
MAX 16,4 ft
MAX 5 metres
MODELS WITH REMOTE CONTROL
• Point the remote control at the receiver on the air conditioner. The remote control must be no more than 16.4 ft (5 metres)
away from the appliance (without obstacles between the
remote control and the receiver).
• The remote control must be handled with extreme care. Do
not drop it or expose it to direct sunlight or sources of heat.
• Replace the cover.
PLEASE NOTE: The remote control can be safely stored in the
appropiate compartment 11 (see figure).
DESCRIPTION OF THE REMOTE CONTROL
20)
21)
22)
23)
24)
25)
"ON/OFF" button
Increase/decrease temperature/programmed operation
"MODE" button
"TIMER" button
°F/°C switching button
Fan speed button (MAX/MED/MIN)
Replacing the batteries
•
•
•
Remove the cover on the back of the remote control;
Insert two new LR03 “AAA” 1.5V batteries, making sure they are in the
correct position (see the instructions inside the battery compartment);
Replace the cover.
20
21
25
22
23
24
11
Using the remote control unit
If the remote control unit is replaced or discarded, the batteries must be removed and
disposed of in accordance with current legislation as they are harmful to the environment.
Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. Do not dispose of batteries in fire. Batteries may explode or
leak. If the remote control will not be used for a certain length of time, remove the batteries.
• Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
• This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
• This Class B digital apparatus complies with Canadian CAN ICES-3 (B) / NMB-3 (B).
TURNING THE APPLIANCE ON
Plug the appliance into the electrical receptacle.
Press the ON/OFF button of the remote control (20) (when turned on, the air conditioner starts
operating in the same mode as when last turned off).
Press the MODE button (22) button to select the required mode:
AIR CONDITIONING (COOLING)
DEHUMIDIFYING
FAN ONLY
The light corresponding to the selected mode lights up on the control panel.
For air conditioning/dehumidifying/fan only settings and programming the timer, see the paragraphs on pages 9 - 11.
12
Tips
To get the best from your air conditioner, follow these recommendations:
• close the doors and windows of the room
to be air conditioned. The only exception
is when the appliance is installed through
a hole in the wall. In this case, you are
recommended to leave a slight draught
through a door or window to guarantee
correct ventilation.
• Never use the appliance in very damp
rooms (laundries for example).
• Never use the appliance outdoors.
close doors and windows
• Protect the room from direct exposure to
the sun by partially closing curtains and/or
blinds to make the appliance much more
economical to run;
• Never rest objects of any kind on the air
conditioner;
• Do not obstruct the air intakes
8 or outlet 1 ;
6
and
• Make sure there are no heat sources in the
room.
close blinds or curtains
• Make sure the air conditioner is on a flat
floor.
do not cover
the appliance
13
Cleaning
Before cleaning or maintenance, turn the
appliance off by pressing the ON/OFF button (A)
or in models with remote control, by pressing the
ON/OFF button 20 , then always unplug the
appliance from the electrical receptacle.
CLEANING THE CABINET
You should clean the appliance with a slightly
damp cloth then dry with a dry cloth. For
safety reasons, never wash the air conditioner
with water.
Precautions
Never use petrol, alcohol or solvents to clean
the appliance. Never spray insecticide liquids
or similar.
CLEANING THE SILVER ION AIR FILTER
If the filter is dirty, air circulation is compromised and the efficiency of the appliance
decreases.
It is therefore good practice to clean the filter
at regular intervals. The frequency depends
on the duration and conditions of operation.
If the unit is used constantly or systematically,
you are recommended to clean the filter
once a week.
The filter is housed in the intake grille.
To clean the filter, extract as shown in fig. L.
Use a vacuum cleaner to remove the dust
collected on the filter. If it is very dirty, immerse in warm water and rinse a number of times.
The water should never be hotter than 104°F
40°C.
After washing the filter, allow it to dry completely before repositioning it.
The silver ion filter not just retains dust particles, but also has an efficient antibacterial
action. It also greatly reduces concentrations
of irritants such as pollen and spores.
START OF SEASON CHECKS
Make sure the power cable and plug are
undamaged and the ground connection is
efficient. Follow the installation instructions
precisely.
END OF SEASON OPERATIONS
To drain all water from the circuit, remove the
external cap by unscrewing it in the anticlockwise direction then, remove the internal
cap from the drainage 10 on the back of
the appliance and allow the water to drain
out into a basin (figure M).
When the appliance is empty, replace the
caps.
Clean the filter and dry thoroughly before
putting back.
M
L
14
Troubleshooting
PROBLEM
The air conditioner
does not come on
CAUSE
REMEDY
•
there is no current
•
wait
•
the appliance is not plugged into the electrical receptacle
•
•
The safety device of the plug has tripped
plug into the electrical receptacle
reset the plug safety device, if
problem persists contact our toll
free customer service.
•
the air exhaust hose has a constriction
•
•
the air exhaust hose is blocked
•
•
there are bends in the air exhaust hose
•
•
windows opened
•
•
•
the exhaust hose is detached
air filter clogged
•
•
•
The air conditioner
works for a short
time only
The air conditioner
works, but does not
cool the room
position the air exhaust hose
correctly
check there are no obstacles
obstructing air discharge
eliminate the bends
close all windows. Only the
window where the appliance
is installed can remain slightly
opened
connect the exhaust hose
clean or replace the filter
Unpleasant smell in
the room
•
the air filter is clogged
•
clean or replace the filter
The air conditioner
does not operate
after restarting it
•
The safety device has tripped
•
wait for 3 minutes (it’s due to a
normal safety check)
The alarm light
(L) comes on
•
The tray under the appliance is full
•
empty the tray (see paragraph
on end-of-season operations
on page 14).
SELF-DIAGNOSIS
The appliance has a self diagnosis system to identify a number of malfunctions.
Error messages are displayed on the appliance display.
IF THE APPLIANCE DISPLAYS...
“Low Temperature”
…THIS MEANS:
room temperature is too low
IF THE APPLIANCE DISPLAYS...
“High Temperature”
…THIS MEANS:
room temperature is too high
IF THE APPLIANCE DISPLAYS...
“Probe Failure”
…THIS MEANS:
contact Customer Services.
15
Technical specification
TECHNICAL CHARACTERISTICS:
Power supply voltage
Max. power input
during air conditioning
Max. power input
during heating
Refrigerant
Cooling capacity
LIMIT CONDITIONS
see rating plate
“
“
“
“
Room temperature for air
conditioning (with fans
at maximum speed)
64 ÷ 104°F
18 ÷ 40°C
Transport, filling, cleaning, recovery and disposal of refrigerant should be performed by a technical service centre appointed by the manufacturer only.
The appliance should be disposed of by a specialist centre appointed by the manufacturer only.
NEVER TRANSPORT OR TURN THE APPLIANCE UPSIDE DOWN OR ON ITS
SIDE. IF THIS OCCURS, WAIT 6 HOURS BEFORE TURNING THE APPLIANCE
ON, 24 HOURS IS RECOMMENDED. (After the unit has been on its side,
oil needs to return to the compressor to ensure proper function.
Without allowing the unit this time (6-24 hours) The unit may function
for only a short time, and then the compressor will break down from
lack of oil).
This appliance is equipped with a 3 prong grounded plug. The plug must be connected
into an outlet that is properly installed and grounded in the accordance with all local
codes and ordinances. Do not modify the plug provided with the appliance. If it will not
fit the outlet, have a proper outlet installed by a qualified electrician or relocate the unit
to a proper outlet.
If the household electrical supply does not meet the above specifications, or if you are
not sure your home has an effective electrical ground, have a qualified electrician or
your local electrical utility company check it and correct any problems.
SAFETY PLUG
The appliance is fitted with a safety plug to protect the power cable.
If power is cut off, unplug from the outlet and make sure the power cable is undamaged.
If the cable is damaged, call the service center immediately.
If power cuts off frequently and the power cable is undamaged, contact a qualified electrician.
OPERATION OF THE SAFETY PLUG
If the safety device incorporated in the plug trips and cuts off the power supply, check
that the power cable and plug are not damaged.
If the power cable is undamaged, to restore operation press the "RESET" button.
To verify correct operation of the plug, press the "TEST" button periodically and make sure
the appliance disconnects. If this is not the case, contact the service center.
To restore operation, press the "RESET" button.
16
L i m i t e d Wa r ra n t y
De’Longhi is the distributor of Kenwood home appliances.
This warranty applies to all home appliances with De’Longhi or Kenwood brand names
LIMITED WARRANTY
We warrant each De’Longhi AIR CONDITIONER to be free from defects in material and workmanship. From the purchase date, our obligation under this warranty is to provide one (1) year free
parts and labor on the entire AIR CONDITIONER, with an additional four (4) years free on any part
of the sealed system consisting of the compressor, evaporator, condenser and factory connected
refrigerant tubing. Labor and all other parts during the additional four (4) years warranty are to
be paid by the owner. All AIR CONDITIONERS in need of repair are to be shipped to an authorized De’Longhi service center at the owner’s expense, and De’Longhi will then incur the return
shipping costs. After the first five (5) years of ownership, all expenses (all parts, labor and shipping)
are to be paid by the owner of the unit. This warranty shall apply only if the AIR CONDITIONER is
used in accordance with the factory directions that accompany it, and on an Alternating Current
(AC) circuit. This warranty is in lieu of all other warranties and representations, expressed or
implied, and all other obligations or liabilities on our part. We do not authorize any other person
or company to assume for us any liability in connection with the sale or use of our AIR CONDITIONER. This warranty shall not apply to any AIR CONDITIONER that has been repaired or altered outside our factory nor shall it apply to any AIR CONDITIONER that has been subjected to misuse,
negligence or accidents.
If repairs become necessary, see contact information below:
U.S. Residents:
Please contact our toll free hotline at 1-800-322-3848
or log onto our website at www.delonghi.com
CANADA Residents:
Please contact our toll free hotline at 1-888-335-6644
or log onto our website at www.delonghi.com
MEXICO Residents:
Please contact our toll free hotline at 01-800-711-8805
or log onto our website at www.delonghi.com
The above warranty is in lieu of all other express warranties and representations. All implied
warranties are limited to the applicable warranty period set forth above. This limitation does not
apply if you enter into an extended warranty with De’Longhi. Some states/countries do not allow
limitations on how long an implied warranty lasts, so the above exclusions may not apply to you.
De’Longhi does not authorize any other person or company to assume for it any liability in
connection with the sale or use of its appliance.
How does country law apply?
This warranty gives you specific legal rights, and you may also have other rights, which vary from
state to state/country to country.
17
Download PDF

advertising