La Spaziale S1 Vivendi
La Spaziale S1 Vivendi
Dose Setting (to program single or double cup button)
With the machine on, hold the On/Off button til the On/Stby light flashes.
Fill PF with coffee. Press the Single Cup or Double Cup button.
Press the same button again when proper volume achieved.
Momentarily press the On/Off button to save setting.
Master Temp Setting
With machine on, hold On/Off button til On/Stby & current Temp lamps
start flashing. Press the Hot Water button to cycle to the next Temp.
When the desired Temp lamp is lit, press the On/Off button to save.
Incremental Temp Control (up to ±3ºC)
Press On/Off button til On/Stby light blinks. Press Two Cup for 3 sec.
To increase temp press One Cup button. 1 green=+1ºC,2 green=+2ºC,
3 green=+3ºC. Just two yellow lamps=0ºC. To decrease temp press
Boiler button. 1 yellow=-1ºC,1 yellow+1 red=-2ºC,1yellow+2 red=-3ºC.
Press Two Cup button until lamps go out & On/Stby blinking.
La Spaziale S1 Vivendi
La Spaziale S1 Vivendi
Dose Setting (to program single or double cup button)
With the machine on, hold the On/Off button til the On/Stby light flashes.
Fill PF with coffee. Press the Single Cup or Double Cup button.
Press the same button again when proper volume achieved.
Momentarily press the On/Off button to save setting.
Master Temp Setting
With machine on, hold On/Off button til On/Stby & current Temp lamps
start flashing. Press the Hot Water button to cycle to the next Temp.
When the desired Temp lamp is lit, press the On/Off button to save.
Incremental Temp Control (up to ±3ºC)
Press On/Off button til On/Stby light blinks. Press Two Cup for 3 sec.
To increase temp press One Cup button. 1 green=+1ºC,2 green=+2ºC,
3 green=+3ºC. Just two yellow lamps=0ºC. To decrease temp press
Boiler button. 1 yellow=-1ºC,1 yellow+1 red=-2ºC,1yellow+2 red=-3ºC.
Press Two Cup button until lamps go out & On/Stby blinking.
La Spaziale S1 Vivendi
La Spaziale S1 Vivendi
Dose Setting (to program single or double cup button)
With the machine on, hold the On/Off button til the On/Stby light flashes.
Fill PF with coffee. Press the Single Cup or Double Cup button.
Press the same button again when proper volume achieved.
Momentarily press the On/Off button to save setting.
Master Temp Setting
With machine on, hold On/Off button til On/Stby & current Temp lamps
start flashing. Press the Hot Water button to cycle to the next Temp.
When the desired Temp lamp is lit, press the On/Off button to save.
Incremental Temp Control (up to ±3ºC)
Press On/Off button til On/Stby light blinks. Press Two Cup for 3 sec.
To increase temp press One Cup button. 1 green=+1ºC,2 green=+2ºC,
3 green=+3ºC. Just two yellow lamps=0ºC. To decrease temp press
Boiler button. 1 yellow=-1ºC,1 yellow+1 red=-2ºC,1yellow+2 red=-3ºC.
Press Two Cup button until lamps go out & On/Stby blinking.
Dose Setting (to program single or double cup button)
With the machine on, hold the On/Off button til the On/Stby light flashes.
Fill PF with coffee. Press the Single Cup or Double Cup button.
Press the same button again when proper volume achieved.
Momentarily press the On/Off button to save setting.
Master Temp Setting
With machine on, hold On/Off button til On/Stby & current Temp lamps
start flashing. Press the Hot Water button to cycle to the next Temp.
When the desired Temp lamp is lit, press the On/Off button to save.
Incremental Temp Control (up to ±3ºC)
Press On/Off button til On/Stby light blinks. Press Two Cup for 3 sec.
To increase temp press One Cup button. 1 green=+1ºC,2 green=+2ºC,
3 green=+3ºC. Just two yellow lamps=0ºC. To decrease temp press
Boiler button. 1 yellow=-1ºC,1 yellow+1 red=-2ºC,1yellow+2 red=-3ºC.
Press Two Cup button until lamps go out & On/Stby blinking.
Dose Setting (to program single or double cup button)
With the machine on, hold the On/Off button til the On/Stby light flashes.
Fill PF with coffee. Press the Single Cup or Double Cup button.
Press the same button again when proper volume achieved.
Momentarily press the On/Off button to save setting.
Master Temp Setting
With machine on, hold On/Off button til On/Stby & current Temp lamps
start flashing. Press the Hot Water button to cycle to the next Temp.
When the desired Temp lamp is lit, press the On/Off button to save.
Incremental Temp Control (up to ±3ºC)
Press On/Off button til On/Stby light blinks. Press Two Cup for 3 sec.
To increase temp press One Cup button. 1 green=+1ºC,2 green=+2ºC,
3 green=+3ºC. Just two yellow lamps=0ºC. To decrease temp press
Boiler button. 1 yellow=-1ºC,1 yellow+1 red=-2ºC,1yellow+2 red=-3ºC.
Press Two Cup button until lamps go out & On/Stby blinking.
La Spaziale S1 Vivendi
La Spaziale S1 Vivendi
Dose Setting (to program single or double cup button)
With the machine on, hold the On/Off button til the On/Stby light flashes.
Fill PF with coffee. Press the Single Cup or Double Cup button.
Press the same button again when proper volume achieved.
Momentarily press the On/Off button to save setting.
Master Temp Setting
With machine on, hold On/Off button til On/Stby & current Temp lamps
start flashing. Press the Hot Water button to cycle to the next Temp.
When the desired Temp lamp is lit, press the On/Off button to save.
Incremental Temp Control (up to ±3ºC)
Press On/Off button til On/Stby light blinks. Press Two Cup for 3 sec.
To increase temp press One Cup button. 1 green=+1ºC,2 green=+2ºC,
3 green=+3ºC. Just two yellow lamps=0ºC. To decrease temp press
Boiler button. 1 yellow=-1ºC,1 yellow+1 red=-2ºC,1yellow+2 red=-3ºC.
Press Two Cup button until lamps go out & On/Stby blinking.
Dose Setting (to program single or double cup button)
With the machine on, hold the On/Off button til the On/Stby light flashes.
Fill PF with coffee. Press the Single Cup or Double Cup button.
Press the same button again when proper volume achieved.
Momentarily press the On/Off button to save setting.
Master Temp Setting
With machine on, hold On/Off button til On/Stby & current Temp lamps
start flashing. Press the Hot Water button to cycle to the next Temp.
When the desired Temp lamp is lit, press the On/Off button to save.
Incremental Temp Control (up to ±3ºC)
Press On/Off button til On/Stby light blinks. Press Two Cup for 3 sec.
To increase temp press One Cup button. 1 green=+1ºC,2 green=+2ºC,
3 green=+3ºC. Just two yellow lamps=0ºC. To decrease temp press
Boiler button. 1 yellow=-1ºC,1 yellow+1 red=-2ºC,1yellow+2 red=-3ºC.
Press Two Cup button until lamps go out & On/Stby blinking.
Dose Setting (to program single or double cup button)
With the machine on, hold the On/Off button til the On/Stby light flashes.
Fill PF with coffee. Press the Single Cup or Double Cup button.
Press the same button again when proper volume achieved.
Momentarily press the On/Off button to save setting.
Master Temp Setting
With machine on, hold On/Off button til On/Stby & current Temp lamps
start flashing. Press the Hot Water button to cycle to the next Temp.
When the desired Temp lamp is lit, press the On/Off button to save.
Incremental Temp Control (up to ±3ºC)
Press On/Off button til On/Stby light blinks. Press Two Cup for 3 sec.
To increase temp press One Cup button. 1 green=+1ºC,2 green=+2ºC,
3 green=+3ºC. Just two yellow lamps=0ºC. To decrease temp press
Boiler button. 1 yellow=-1ºC,1 yellow+1 red=-2ºC,1yellow+2 red=-3ºC.
Press Two Cup button until lamps go out & On/Stby blinking.
La Spaziale S1 Vivendi
La Spaziale S1 Vivendi
Dose Setting (to program single or double cup button)
With the machine on, hold the On/Off button til the On/Stby light flashes.
Fill PF with coffee. Press the Single Cup or Double Cup button.
Press the same button again when proper volume achieved.
Momentarily press the On/Off button to save setting.
Master Temp Setting
With machine on, hold On/Off button til On/Stby & current Temp lamps
start flashing. Press the Hot Water button to cycle to the next Temp.
When the desired Temp lamp is lit, press the On/Off button to save.
Incremental Temp Control (up to ±3ºC)
Press On/Off button til On/Stby light blinks. Press Two Cup for 3 sec.
To increase temp press One Cup button. 1 green=+1ºC,2 green=+2ºC,
3 green=+3ºC. Just two yellow lamps=0ºC. To decrease temp press
Boiler button. 1 yellow=-1ºC,1 yellow+1 red=-2ºC,1yellow+2 red=-3ºC.
Press Two Cup button until lamps go out & On/Stby blinking.
Dose Setting (to program single or double cup button)
With the machine on, hold the On/Off button til the On/Stby light flashes.
Fill PF with coffee. Press the Single Cup or Double Cup button.
Press the same button again when proper volume achieved.
Momentarily press the On/Off button to save setting.
Master Temp Setting
With machine on, hold On/Off button til On/Stby & current Temp lamps
start flashing. Press the Hot Water button to cycle to the next Temp.
When the desired Temp lamp is lit, press the On/Off button to save.
Incremental Temp Control (up to ±3ºC)
Press On/Off button til On/Stby light blinks. Press Two Cup for 3 sec.
To increase temp press One Cup button. 1 green=+1ºC,2 green=+2ºC,
3 green=+3ºC. Just two yellow lamps=0ºC. To decrease temp press
Boiler button. 1 yellow=-1ºC,1 yellow+1 red=-2ºC,1yellow+2 red=-3ºC.
Press Two Cup button until lamps go out & On/Stby blinking.