Operating instructions
for washing machines
To avoid the risk of accidents or damage to the machine, it is essential
to read these instructions before it is installed and used for the first time.
en-GB
M.-Nr. 10 834 320
Caring for the environment
Disposal of the packing material
Disposing of your old appliance
The packaging is designed to protect
the appliance from damage during
transportation. The packaging materials
used are selected from materials which
are environmentally friendly for disposal
and should be recycled.
Electrical and electronic appliances often contain valuable materials. They
also contain specific materials, compounds and components, which were
essential for their correct function and
safety. These could be hazardous to human health and to the environment if
disposed of with your domestic waste
or if handled incorrectly. Please do not,
therefore, dispose of your old appliance
with your household waste.
Recycling the packaging reduces the
use of raw materials in the manufacturing process and also reduces the
amount of waste in landfill sites.
Please dispose of it at your local community waste collection / recycling
centre for electrical and electronic appliances, or contact your dealer or
Miele for advice. You are also responsible (by law, depending on country) for
deleting any personal data that may be
stored on the appliance being disposed
of. Please ensure that your old appliance poses no risk to children while being stored prior to disposal.
2
Contents
Caring for the environment .................................................................................. 2
Warning and Safety instructions ......................................................................... 6
Operating the washing machine ........................................................................ 13
Control panel ......................................................................................................... 13
How the control panel works ................................................................................ 14
Before using for the first time ............................................................................ 16
Washing environmentally and economically .................................................... 18
1. Prepare the laundry......................................................................................... 19
2. Load the washing machine............................................................................. 20
3. Select a programme........................................................................................ 21
4. Add detergent .................................................................................................. 23
Detergent dispenser drawer .................................................................................. 23
Tips on dosing.................................................................................................. 23
Adding detergent.............................................................................................. 23
CapDosing............................................................................................................. 24
5. Start the programme....................................................................................... 26
6. End of programme - unload the drum ........................................................... 27
Spinning................................................................................................................ 28
Delay start ............................................................................................................ 30
Programme chart ................................................................................................ 31
Extra options........................................................................................................ 34
Short...................................................................................................................... 34
Water plus ............................................................................................................. 34
Pre-wash ............................................................................................................... 34
Soak ...................................................................................................................... 34
The following extra options can be selected in addition to the programme: ........ 35
Programme sequence......................................................................................... 36
Changing the programme sequence ................................................................ 38
Changing a programme......................................................................................... 38
Cancelling a programme ....................................................................................... 38
Interrupting a programme...................................................................................... 38
Adding or removing laundry .................................................................................. 39
3
Contents
Garment care label symbols............................................................................... 40
Detergent ............................................................................................................. 41
The correct detergent............................................................................................ 41
Water softeners ..................................................................................................... 41
Dispensing aids ..................................................................................................... 41
Fabric conditioner and liquid starch ...................................................................... 41
Miele recommended detergents ........................................................................... 42
Recommended detergents in accordance with Directive (EU) Nr. 1015/2010...... 43
Cleaning and care ............................................................................................... 45
Cleaning the drum (Hygiene info) .......................................................................... 45
External casing and fascia panel........................................................................... 45
Cleaning the detergent dispenser drawer ............................................................. 45
Cleaning the water inlet filters ............................................................................... 47
Problem solving guide ........................................................................................ 48
The programme does not start.............................................................................. 48
The programme is cancelled and a fault indicator light lights up in the
control panel.......................................................................................................... 49
During the programme, a symbol appears in the time display ............................. 50
At the end of the programme, an indicator light lights up in the control panel ..... 50
General problems with the washing machine ....................................................... 51
An unsatisfactory wash result ............................................................................... 53
The door will not open........................................................................................... 54
Opening the door in the event of a blocked drain outlet and/or power failure ..... 55
After sales service............................................................................................... 57
Contact in case of malfunction ............................................................................. 57
Optional accessories............................................................................................. 57
Warranty ................................................................................................................ 57
Installation and connection ................................................................................ 58
Front view .............................................................................................................. 58
Rear view............................................................................................................... 59
Installation surface ................................................................................................ 60
Transporting the washing machine to its installation site...................................... 60
Removing the transit bars ..................................................................................... 60
Re-fitting the transit bars....................................................................................... 62
Levelling the machine............................................................................................ 63
Screwing out and adjusting the feet................................................................. 63
Building under a continuous worktop/ in a kitchen run.................................... 64
Washer-dryer stack .......................................................................................... 64
The water protection system................................................................................. 65
4
Contents
Connection to the water supply ............................................................................ 66
Water drainage ...................................................................................................... 67
Electrical connection U.K. ..................................................................................... 68
Technical data...................................................................................................... 69
Data sheet household washing machines............................................................. 70
Consumption data ............................................................................................... 72
Note for test institutes ........................................................................................... 72
Programmable functions .................................................................................... 73
Choosing and selecting a programmable function ............................................... 73
Editing and saving the programmable function .................................................... 74
Exit programming level.......................................................................................... 74
 Keypad tone..................................................................................................... 74
 Lock code........................................................................................................ 75
 Control panel switch-off status ...................................................................... 75
 Memory .......................................................................................................... 76
 Longer pre-wash Cottons .............................................................................. 76
 Soak duration ................................................................................................. 76
 Gentle action .................................................................................................. 76
 Reduce temperature....................................................................................... 77
 Water plus....................................................................................................... 77
 Water plus level ............................................................................................... 77
 Maximum rinse level ....................................................................................... 77
 Suds cooling ................................................................................................... 78
 Anti-crease ..................................................................................................... 78
 Backlight brightness dimmed ........................................................................ 78
Optional accessories .......................................................................................... 79
Detergent............................................................................................................... 79
Specialist detergents............................................................................................. 79
Fabric care............................................................................................................. 80
Additive ................................................................................................................. 80
Machine care......................................................................................................... 80
5
Warning and Safety instructions
This washing machine complies with current safety requirements.
Inappropriate use can, however, lead to personal injury and damage to property.
To avoid the risk of accidents and damage to the machine, please
read these instructions carefully before using it for the first time.
They contain important information on its safety, use and maintenance.
Keep these instructions in a safe place and ensure that new users
are familiar with the content. Pass them on to any future user.
Correct application
 This washing machine is intended for use in domestic households
and similar working and residential environments.
 The washing machine is not intended for outdoor use.
 It must be used only as a domestic appliance to wash items which
are specified by the manufacturer as being washable on the wash
care label. Miele cannot be held liable for damage resulting from incorrect or improper use or operation.
 The washing machine can only be used by people with reduced
physical, sensory or mental capabilities, or lack of experience or
knowledge, if they are supervised whilst using it or have been shown
how to use it safely and recognise and understand the consequences of incorrect operation.
6
Warning and Safety instructions
Safety with children
 Children under 8 years of age must be kept away from the washing machine unless they are constantly supervised.
 Children 8 years and older may only use the washing machine unsupervised if they have been shown how to use it safely and recognise and understand the consequences of incorrect operation.
 Children must not be allowed to clean or maintain the washing
machine unsupervised.
 Please supervise children in the vicinity of the washing machine
and do not let them play with it.
Technical safety
 Please observe the instructions in "Installation and connection"
and "Technical data".
 Before setting up the washing machine, check it for any externally
visible damage. Do not install or use a damaged machine.
 Before connecting the washing machine, ensure that the connection data on the data plate (fuse rating, voltage and frequency) match
the mains electricity supply. If in any doubt, consult a qualified electrician.
 Reliable and safe operation of this washing machine can only be
assured if it has been connected to the mains electricity supply.
7
Warning and Safety instructions
 The electrical safety of this washing machine can only be guaranteed when correctly earthed.
It is essential that this standard safety requirement is met. If in any
doubt, please have the wiring system of the building tested by a
qualified electrician.
Miele cannot be held liable for the consequences of an inadequate
earthing system (e.g. electric shock).
 Do not connect the washing machine to the mains electricity supply by a multi-socket adapter, extension lead or similar. These do not
guarantee the required safety of the machine (fire hazard due to the
risk of overheating).
 Faulty components must only be replaced by genuine Miele original spare parts. Only when these parts are fitted can Miele guarantee the safety standards of the machine.
 The electrical socket must be easily accessible after installation so
that the machine can be disconnected from the electricity supply if
necessary.
 Unauthorised repairs could result in unforeseen dangers for the
user, for which the manufacturer cannot accept liability. Repairs
should only be undertaken by a Miele authorised service technician,
otherwise any subsequent damage will not be covered by the warranty.
 If the electrical connection cable is faulty it must only be replaced
by a Miele authorised service technician to protect the user from
danger.
8
Warning and Safety instructions
 The machine must be isolated from the electricity supply when
cleaning and maintaining the machine and in the event of a fault.
 The machine must only be connected to the on-site water supply
using a new hose kit. Old hose kits must not be re-used. Check the
condition of the hoses regularly so that you can replace them in
good time and avoid the risk of any water damage.
 The water flow pressure must be at least 100 kPa and should not
exceed 1000 kPa.
 In areas which may be subject to infestation by cockroaches or
other vermin, pay particular attention to keeping the machine and its
surroundings in a clean condition at all times. Any damage which
may be caused by cockroaches or other vermin will not be covered
by the warranty.
 The machine must not be used in a non-stationary location (e.g.
on a ship).
 Do not make any alterations to the machine, unless authorised to
do so by Miele.
9
Warning and Safety instructions
Correct use
 Do not install the washing machine in a room where there is a risk
of frost. Frozen hoses may burst or split. The reliability of the electronic control unit may be impaired at temperatures below freezing
point.
 Before using the machine for the first time, check that the transit
bars at the rear of the machine have been removed (see "Installation
and connection - Removing the transit bars"). During spinning, a
transit bar which is still in place may result in damage to both the
machine and adjacent furniture or appliances.
 Turn off the stopcock if the machine is to be left for any length of
time (e.g. holiday), especially if there is no floor drain (gully) in the immediate vicinity.
 Flooding danger.
If hooking the drain hose into a wash basin, check that the water can
drain off quickly enough to prevent the sink from overflowing. Make
sure the drain hose is secure, so that the force of the water flowing
out of the hose does not dislodge it.
 Take care to ensure that foreign objects (e.g. nails, pins, coins, paper clips) do not find their way into the machine with the laundry.
These may damage components of the machine (e.g. suds container, drum), which in turn can result in damage to the laundry.
 The maximum load for this washing machine is 8 kg (dry weight).
See the "Programme chart" for the maximum recommended loads
for individual programmes.
10
Warning and Safety instructions
 If the correct amount of detergent is dispensed, the machine
should not need to be descaled. If, however, you do wish to descale
it, only use a proprietary natural citric acid based descaling agent.
Miele recommends using Miele descaling agent which is available to
order online at www.miele-shop.com or from Miele. Strictly observe
the instructions on the packaging.
 Textiles which have been pre-treated in solvent based cleaning
agents must be thoroughly rinsed in clean water before being
washed in the machine.
 Do not use solvent based cleaning agents, e.g. those containing
benzine, in this machine, as this may result in damage to component
parts and create toxic fumes. Such agents also pose a fire and explosion hazard.
 Do not use solvent based cleaning agents, e.g. those containing
benzine, to clean the surfaces of the machine. They can cause damage to plastic surfaces.
 Only use dyes specified by the manufacturer as being suitable for
use in a domestic washing machine. Always observe the manufacturer's instructions carefully.
 Colour run and dye removers contain sulphur compounds which
can cause damage such as corrosion. Do not use these products in
this machine.
 If detergent comes into contact with the eyes, rinse them thoroughly with lukewarm water immediately. If swallowed, seek medical
assistance immediately and retain the packaging or label for reference. Those with skin problems or sensitive skin should avoid their
skin coming into contact with detergent.
11
Warning and Safety instructions
Accessories
 Accessory parts may only be fitted when expressly approved by
Miele. If other parts are used, warranty, performance and product liability claims will be invalidated.
 A Miele tumble dryer can be stacked on top of a Miele washing
machine using the appropriate stacking kit (available as an optional
accessory). Please make sure you order the correct one for the Miele
washing machine and Miele tumble dryer.
 If installing the machine on a Miele plinth, (available as an optional
accessory, depending on country), please make sure you order the
correct one for this washing machine.
Miele cannot be held liable for damage caused by non-compliance
with these Warning and Safety instructions.
12
Operating the washing machine
Control panel
a Control panel
b Sensor controls – temperature
for selecting the temperature.
c Sensor controls – spin speed
for selecting the spin speed.
d Sensor controls – extras
various options can be added to the
wash programmes.
e Indicator lights   
light up when necessary
f Sensor controls – CapDosing
g Time display
for the programme duration
h Sensor controls   
for the delay start function
i Sensor control – Start/Stop
for the programme start/cancellation
j Optical interface
for service technicians
k Programme selector
for programme selection and for
switching the machine off. Selecting
a programme switches the washing
machine on, and turning the programme selector to  switches the
machine off.
13
Operating the washing machine
How the control panel works
 Sensor controls for extras
You can select extra options to augment the wash programmes.
If a wash programme has been selected, the sensor controls for the possible
extras light up dimly.
 Indicator lights
– 
light up if there are faults with the water inlet and drainage
The , , , ,  and  sensors
react to fingertip contact. Selection is
possible as long as the respective
sensor is illuminated.
If a sensor is brightly lit, this means:
currently selected
If a sensor is dimly lit, this means: selection possible
 and  sensors for temperature
and spin speed
After selecting a wash programme with
the programme selector, the recommended temperature (in °C) and spin
speed (in rpm) light up brightly.
Selectable temperatures and spin
speeds light up dimly.
– 
lights up if excess detergent was
used
– 
lights up as a reminder about hygiene
information
– 
flashes for as long as it is possible to
add laundry
lights up when the door of the washing machine is locked
 CapDosing
The CapDosing sensors are used for
activating cap dosing.
– 
Fabric care (e.g. fabric conditioner,
proofing agent)
– 
Additives (e.g. detergent enhancers)
– 
Detergent (for the main wash only)
14
Operating the washing machine
 Time display
 Start/Stop sensor control
After the programme has started, the
programme duration will appear in the
display in hours and minutes.
Touching the Start/Stop sensor starts
the selected programme or cancels a
programme that has already been started. The sensor flashes slowly as soon
as it is possible for a programme to be
started and then lights up constantly
after the programme has started.
If delay start has been selected, the
programme duration will appear at the
end of the delay start time.
 Sensor controls   
– 
After touching the  sensor, a later
start time for the programme (delay
start) can be selected. Once selected,  lights up brightly.
– 
The duration of the delay start period
is selected by touching the  or
 sensor.
The delay start time selected will appear in the time display.
After the programme has started, the
delay start time will begin to count
down.
Once the delay start time has elapsed,
the programme begins and the estimated programme duration appears in
the time display.
15
Before using for the first time
 Before using the machine for the
first time ensure that it is correctly installed and connected. See "Installation and connection". Also check
that the drain filters are securely
tightened to prevent the risk of water
leaks during use.
Remove the protective foil and
stickers
 Remove
– the protective foil from the door.
– any stickers from the front and the
lid.
 Please do not remove any labels
(e.g. the data plate), visible when you
open the door.
Remove the drain hose elbow
from the drum
An elbow piece for the drain hose is
stored in the drum.
 Shut the door with a gentle swing.
This washing machine has undergone
a complete functional test at the factory and there will be some residual
water in the drum from this process.
For safety reasons, spinning is not possible until the machine has been prepared for using for the first time. To activate the spinning function you must
run a wash programme without laundry
and without detergent.
Using detergent could result in an excessive build-up of foam.
This also activates the ball valve. The
ball valve prevents detergent escaping
from the suds container into the sump
during a wash programme, thus making
maximum use of the detergent.
 Reach under the door grip and pull
the door open.
 Remove the elbow piece.
16
Before using for the first time
Running the first programme
 Open the stopcock.
 Turn the programme selector to Cottons.
The washing machine is now switched
on and in the control panel, the temperature 60 °C lights up.
 Touch the Start/Stop sensor.
The programme will start and the 
symbol lights up in the control panel.
After 10 minutes, the indicators dim
and the Start/Stop sensor starts
flashing.
Tip: Leave the door slightly open to allow the drum to dry.
 After the end of the programme, turn
the programme selector to .
The washing machine is switched off
again and is now ready for use.
Energy savings
– Ten minutes after the beginning of the
anti-crease phase, the indicators dim
and the Start/Stop sensor starts
flashing.
– Fifteen minutes after completion of
the anti-crease phase, the washing
machine is completely switched off
and the door lock lifted.
After the end of the programme
At the end of the programme, the anticrease phase is switched on. The
 symbol lights up in the control panel;
: appears in the time display and
the drum occasionally rotates.
 Touch the Start/Stop sensor.
The door will unlock.
 Reach under the door grip and pull
the door open.
17
Washing environmentally and economically
Energy and water consumption
Detergent
– Water consumption and energy usage are determined by the size of the
load.
To make the most of your machine,
load the maximum dry load for the
programme you are using.
– Do not exceed the amounts of detergent recommended by the manufacturer on the packaging.
– When smaller amounts of laundry are
washed, the automatic load control
will reduce the amount of water and
energy used.
– Use the Express 20 programme for
small, lightly soiled loads.
– Modern detergents make it possible
to wash at lower temperatures (e.g.
20 °C). Washing using lower temperature settings will save energy.
– To maintain the hygiene of the machine, carry out a hot wash (above
60 °C) at regular intervals. The  indicator will light to remind you to
carry out a hot wash.
– Adjust the dosage to the degree of
soiling of the laundry.
– Reduce the amount of detergent with
smaller loads (approx. ⅓ less than
the amount recommended can be
used when washing a half load).
Choosing the correct extra option
(Short, Soak, Pre-wash)
Select:
– A wash programme together with the
Short extra option for light to normal
soiling where there are no obvious
marks.
– A wash programme without any extra
options for normal to heavy soiling
with visible staining.
– A wash programme together with the
Soak extra option for heavily soiled
laundry.
– The Pre-wash extra option for laundry
with large amounts of dirt (e.g. dust,
sand).
When drying with a tumble dryer
Selecting the highest possible spin
speed for the wash programme will
save energy when drying in a tumble
dryer afterwards.
18
1. Prepare the laundry
Tip: Badly soiled areas can be pretreated with liquid detergent, stain removers etc. first, following the manufacturer's instructions. With particularly
stubborn stains ask your dry cleaner for
advice.
 Solvent-based cleaners (e.g.
 Empty all pockets.
 Foreign objects (e.g. nails, coins,
paper clips, etc.) can cause damage
to garments and to components in
the machine.
Check the laundry before washing
and remove any foreign objects.
Sort the laundry
 Sort the laundry by colour and by
care label. Most garments have a textile care label in the collar or side
seam.
Tip: Dark textiles often contain excess
dye and should be washed separately
several times before being included in a
mixed load. Always wash whites and
coloureds separately.
Pre-treat stains
 Badly soiled areas, stains etc. should
be cleaned as soon as possible,
preferably whilst still fresh. Spillages
should be carefully dabbed off using
a soft, colourfast cloth. Do not rub.
benzine) can damage plastic parts.
When pre-treating garments, make
sure that any plastic parts (e.g. buttons) are protected from cleaning
agent.
 Chemical (solvent-based) cleaning agents can cause severe damage
to the washing machine.
Do not use solvent-based cleaning
agents in this machine.
General tips
– Curtains: Remove lead weights first
or place in a laundry bag.
– Underwiring and collar stiffeners: Any
loose wiring in bras, shirt collar
stiffeners, etc. should be removed or
sewn in.
– Close any zips, attach velcro fasteners, fasten hooks and eyes etc. before washing.
– Fasten duvet covers, pillow cases
etc. to prevent small items from being
rolled up inside them.
Do not wash any items in this washing
machine which are specified by the
manufacturer as not washable on the
care label ( symbol).
19
2. Load the washing machine
Open the door
Close the door
 Reach under the door grip and pull
the door open.
 Make sure that no items are caught
between the door and the seal.
Check the drum for pets or foreign
objects before loading it with laundry.
The most efficient use of energy and
water is achieved when a full load is
washed. However, do not overload as
this reduces cleaning efficiency and
causes creases.
 Unfold the laundry and load loosely
into the drum.
Mixing both large and small items
gives better wash results and also
helps distribute the load evenly during
spinning.
Tip: Please note the maximum load for
different wash programmes.
20
 Shut the door with a gentle swing.
3. Select a programme
Programme selection
The washing machine is switched on by
turning the programme selector to a
wash programme.
Selecting a temperature/spin speed
The wash programme's pre-set temperature and spin speed light up
brightly. The choice of temperatures
and spin speeds selectable for the
wash programme light up dimly.
 Turn the programme selector to the
required programme.
The likely wash time is shown in the
time display and the pre-set temperature and spin speed light up in the control panel.
 Touch the sensor for the temperature
you want. It then lights up brightly.
 Touch the sensor for the spin speed
you want. It then lights up brightly.
21
3. Select a programme
Selecting Extras
The selection of extras available for
the wash programme lights up dimly.
 Touch the sensor for the extra you
want. It then lights up brightly.
Tip: You can select multiple extras for a
wash programme.
Please refer to "Extras" for more information.
22
4. Add detergent
Detergent dispenser drawer
Adding detergent
Any detergent suitable for automatic
front loading washing machines can be
used. Please observe the instructions
for use and dosage on the detergent
packaging.
Tips on dosing
Adjust the detergent dosage to the level
of soiling of the laundry and the size of
the load. Reduce the amount of detergent with smaller loads (e.g. reduce the
amount of detergent by ⅓ when washing a half load).
Too little detergent:
 Pull out the detergent drawer and add
detergent to the compartments.
– Results in laundry not being cleaned
properly and may cause it to become
grey and hard to the touch over time.
 Detergent for the pre-wash
– Can lead to a build-up of mould in
the washing machine.
 Fabric softener, liquid starch, or
 capsules
 Detergent for the main wash and
soaking
– Results in grease not being completely removed from the laundry.
– Can lead to limescale deposits on the
heater elements.
Too much detergent
– Causes poor wash, rinse, and spin
results.
– Causes higher water consumption as
an extra rinse cycle is automatically
activated.
– Is a greater burden on the environment.
23
4. Add detergent
CapDosing
Inserting a capsule
Three different types of capsule are
available:
 Open the detergent dispenser drawer.

= Fabric care (e.g. fabric conditioner, proofing agent)
 = Additives (e.g. detergent enhancers)

= Detergent (for the main wash
only)
Each capsule contains the correct
amount for one wash cycle.
You can order the capsules online at
www.miele-shop.com or from Miele
(see the end of this booklet for contact
details).
 Open the lid of the / compartment.
 Keep capsules out of the reach
of children.
Activating CapDosing
 Touch the sensor for the capsule you
want to use.
Sensor control
24
Capsule

for


for


for

 Press the capsule in firmly.
4. Add detergent
The wash programme will dispense the
contents of the capsule at the correct
time.
Water intake to the  compartment
is solely via the capsule.
No additional fabric conditioner may
be added to the  compartment
when using a capsule.
 Remove the empty capsule at the
end of the programme.
 Close the lid and press it firmly shut.
 Close the detergent dispenser
drawer.
The capsule is opened by the act of
inserting it in the detergent dispenser
drawer. The contents can run out of
the capsule if you then remove it
from the drawer before it is used.
In this case, dispose of the capsule
and do not re-use it.
For technical reasons a small amount
of water will remain in the capsule.
Switching off/changing CapDosing
 In order to switch off CapDosing,
touch the brightly lit sensor.
 In order to change CapDosing, touch
one of the other capsule sensors.
25
5. Start the programme
Starting a programme
 Touch the flashing Start/Stop sensor.
The door will lock and the programme
will start.
– As long as the  symbol is flashing
in the control panel you can add
laundry.
– When the  symbol lights up constantly, the door is locked until the
end of the programme.
If a delay start time has been selected,
then this will count down in the time
display. At the end of the delay start
time or immediately after the programme has started the programme
duration will appear in the time display.
Energy savings
After 10 minutes, the indicators dim.
The Start/Stop sensor flashes slowly.
To reactivate the indicators:
 Touch the Start/Stop sensor (this
does not have any effect on a running
programme).
26
6. End of programme - unload the drum
End of programme
The time display shows 0:00. The 
symbol will remain lit up in the control
panel. The door is locked in the anticrease phase.
Items left in the drum could discolour
other items in the next wash or become discoloured themselves.
Check that all items have been removed from the drum!
 Touch the Start/Stop sensor.
The door will unlock and the symbol 
appears in the control panel.
 Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
 Pull open the door.
 Remove the laundry.
Energy savings
– Ten minutes after the beginning of the
anti-crease phase, the indicators dim
and the Start/Stop sensor starts
flashing.
– Fifteen minutes after completion of
the anti-crease phase, the washing
machine is completely switched off
and the door lock lifted.
Tip: Leave the door slightly open to allow the drum to dry.
 Turn the programme selector to the 
position. This switches the washing
machine off.
 If applicable, remove the used capsule from the detergent dispensing
drawer.
Tip: Leave the detergent dispenser
drawer slightly open to allow it to dry.
27
Spinning
Final spin speed
Programme
rpm
Cottons 
1400
Cottons
1400
Minimum iron
1200
Delicates
900
Woollens 
1200*
Shirts
900
Express 20
1200
Dark garments / Denim
1200
Final spin speed in the programme
When a programme is selected, the
sensor for the optimum spin speed for
that programme will be brightly lit up in
the control panel. For programmes
marked with a * in the chart, the optimum spin speed is not the maximum
spin speed.
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart.
Outerwear
900
Proofing
1200
Drain / Spin
1400
Rinse and interim spin
Separate rinse/Starch
1200
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the interim spin speed. If a spin speed of less
than 700 rpm is selected for the Cottons programme, an additional rinse is
introduced.
28
Spinning
To omit the final spin (Rinse
hold)
To omit rinse and interim spin
and the final spin
 Touch the  sensor (rinse hold).
 Touch the  sensor.
The laundry is not spun after the final
rinse and remains in the final rinse water. This helps prevent creasing if the
laundry is not going to be removed from
the drum immediately after the end of
the programme.
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch in.
In some programmes an additional rinse
is introduced with this setting.
After the end of a programme
The sensor for the optimum spin
speed lights up in the control panel.
You can change the spin speed. The
Start/Stop sensor lights up, flashing.
 Start the final spin:
touch the flashing Start/Stop sensor
once.
The final spin is carried out.
 End the programme:
touch the flashing Start/Stop sensor
twice.
The water will drain away.
29
Delay start
With Delay start you can choose when
you want the programme to start. You
can delay the start of the programme by
30 minutes up to a maximum of 24
hours, allowing you to make use of
night-time economy electricity rates, for
example.
Select delay start
Delay start cannot be selected with
Drain/Spin or Proofing.
 Select the programme required.
 Touch the  sensor.
To begin delay start
 Touch the flashing Start/Stop sensor.
The delay start process starts and
counts down in the time display.
To alter delay start
 Touch the Start/Stop sensor.
The delay start process stops and the
 symbol lights up in the control panel.
 Touch the  or  sensor repeatedly
until the required delayed start time
appears in the time display.
 Touch the flashing Start/Stop sensor.
To cancel a delay start that has
already started
 Touch the Start/Stop sensor.
The delay start process stops and the
 symbol lights up in the control panel.
 Touch the brightly lit  sensor.
The  sensor lights up brightly.
 Touch the  or  sensor repeatedly
until the required delayed start time
appears in the time display.
– For less than 10 hours, the delay start
time changes in increments of 30
minutes
– For more than 10 hours, the delay
start time changes in increments of
one hour
30
The delay start period is deleted and
the  sensor switches off. The programme duration appears in the time
display.
 Touch the flashing Start/Stop sensor
in order to start the wash programme.
Programme chart
Cottons 
60 °C/40 °C
Max. load 8.0 kg
Use for
Normally soiled cotton garments.
Note
– These settings are the most efficient in terms of energy and water
consumption for washing cottons.
– At 60 °C, the actual wash temperature reached will be lower than
60 °C, although the wash performance is the same as with the
Cottons 60 °C programme.
Note for test institutes:
The test programme conforms to EN 60456 and the energy label to Directive
1061/2010
Cottons
Cold to 90 °C
Max. load 8.0 kg
Use for
Cotton, linen or mixed fibre fabric, e.g. table linen, towelling, underwear, T-shirts etc.
Note
The wash temperatures 60 °C/40 °C differentiate themselves from
the programme Cottons  60 °C/40 °C by:
– Shorter programme durations
– Longer temperature holding times
– Higher energy consumption
Where particularly high levels of hygiene are required please select a
temperature of 60 °C or higher.
Minimum iron
Cold to 60 °C
Max. load 3.5 kg
Use for
Synthetic and mixed fibre textiles as well as easy care cotton
Note
Reduce the spin speed for fabric that creases easily.
31
Programme chart
Delicates
Use for
cold to 40 °C
Max. load 2.0 kg
Delicate garments made from synthetic fibre, mixed fibre, rayon and
viscose.
Curtains, including net curtains, specified as machine-washable by
the manufacturer.
Notes
– Dust in curtains usually makes a programme with pre-wash advisable.
– Deselect the spin for items which crease easily.
Woollens 
cold to 40 °C
Max. load 2.0 kg
Use for
Machine-washable or hand-washable wool or wool blend fabric. If
the care label does not specify a temperature, wash using the cold
setting.
Note
Reduce the spin speed for items which crease easily.
Shirts
Cold to 60 °C
Use for
Shirts and blouses made of cotton and mixed fibre
Note
– Pre-treat soiled cuffs and collars if necessary.
Max. load 2.0 kg
– Wash silk shirts and blouses in the Delicates programme.
Express 20
Cold to 40 °C
Max. load 3.5 kg
Use for
Cotton garments that have hardly been worn or are only very lightly
soiled
Note
The Short option is activated automatically.
Dark garments / Denim
cold to 60 °C
Max. load 3.0 kg
Use for
Black and dark items made of cotton, mixed fibre or denim.
Notes
– Wash inside out.
– Denim often contains excess dye and may run during the first few
washes. Wash light and dark coloured items separately.
32
Programme chart
Outerwear
cold to 40 °C
Max. load 2.5 kg
Use for
Performance outerwear (e.g. jackets and trousers) made from membrane fabric such as Gore-Tex®, SYMPATEX®, WINDSTOPPER®
etc.
Notes
– Zip up or close jackets before washing.
– Do not use fabric conditioner.
– If wished, these garments can also be re-proofed using the Proofing programme. Proofing should not be done every time the garment is washed.
Proofing
40 °C
Max. load 2.5 kg
Use for
Treating microfibre fabric, skiwear and table linen made from mainly
synthetic fibres to provide a water and dirt resistant finish.
Notes
– The items should be freshly laundered and spun or dried before
proofing.
– For best results, the items should be heat-treated afterwards either
in a tumble dryer or by ironing.
Drain / Spin
Notes
–
– Drain only: Select  for the spin speed.
– Make sure you select the appropriate spin speed.
Separate rinse/Starch
Use for
Max. load 8.0 kg
– Rinsing handwashed items
– Starching table cloths, serviettes and workwear
Note
– Reduce the spin speed for items which crease easily.
– The laundry should be washed but not treated with fabric conditioner.
– Items will be rinsed very effectively using two rinse cycles by activating the extra Water plus option.
33
Extra options
You can use the extra options buttons
to augment the wash programmes.
Extras are selected and deselected using the relevant sensors on the control
panel.
Water plus
The water level in the wash and rinse
stages is increased and a second rinse
is carried out in the "Separate rinse /
Starch" programme.
You can select other functions for the
Water plus sensor. These are described
in "Programmable functions".
Pre-wash
For laundry with large amounts of dirt,
e.g. dust and sand.
Soak
For heavily soiled and stained items
with protein stains.
 Touch the sensor for the extra you
want.
The relevant sensor will light up brightly.
Not all the extra options are suitable for
use with every programme.
An extra that is not permitted for the
wash programme is not lit dimly and
cannot be activated by touch.
Short
Use this option for light soiling with no
visible staining.
The wash duration is reduced.
34
– A duration of between 30 minutes
and 2 hours can be programmed in
30 minute increments for the soak
process.
– The factory default setting is
30 minutes.
See "Programmable functions - Soak"
for instructions on how to programme a
different soak period.
Extra options
The following extra options can be selected in addition to the
programme:
Short
Water plus
Pre-wash
Soak
None of the extras can be selected with programmes which are not listed in the
chart below.
Cottons 
X
X
X
X
Cottons
X
X
X
X
Minimum iron
X
X
X
X
Delicates
X
X
X
X
Shirts
X
X
X
X
Express 20
X
–
–
–
Dark garments/Denim
X
X
X
X
Outerwear
X
X
X
X
Separate rinse/Starch
–
X
–
–
X = can be selected
1)
1)
= can be deselected
– = cannot be selected
35
Programme sequence
Main wash
Rinses
Spinning
Water
level
Wash
rhythm
Water
level
Rinses
Cottons 



2-5
Cottons



2-5
Minimum iron



Delicates


Woollens 


2)3)

1)2)3)

2-4
2)3)


2-4
2)3)


2

3)
Shirts



3-4

Express 20



1

Dark garments / Denim



3-5
Outerwear



Proofing
–

Drain / Spin
–
–
Separate rinse / Starch


2)3)

3-4
3)


1

–
–

Please see the next page for a description of the symbols.
36

5)
0-1

Programme sequence
 = Low water level
 = Medium water level
 = High water level

= Intensive rhythm

= Normal rhythm

= Sensitive rhythm

= Ultra sensitive rhythm

= Handwash rhythm

= Carried out
–
= Not carried out
The washing machine has fully electronic controls with automatic load recognition. It takes in the right amount of
water required for the programme depending on the amount of laundry and
its absorbency rate.
The programme sequences shown in
the chart are based on the standard
programme with a full load.
Special features in the programme sequence
Anti-crease:
at the end of the programme the drum
continues to turn at intervals for up to
30 minutes to help prevent creasing.
Exception: there is no anti-crease
phase in the Woollens programme.
The door can be opened at any time
during the anti-crease phase.
1)
If a temperature of 60 °C or higher is
selected, two rinses are carried out. If
a temperature of less than 60 °C is
selected, three rinses are carried out.
2)
An additional rinse is carried out if:
– there is too much foam in the drum
– a spin speed lower than 700 rpm has
been selected
3)
An additional rinse is carried out if:
– Water plus has been selected and the
options  or  have been activated
in Programmable functions.
5)
An additional rinse is carried out if:
the Water plus option is selected.
37
Changing the programme sequence
Changing a programme
After the successful start of a programme it is no longer possible to
change the programme.
If you would like to change the programme, you have to cancel the programme.
Cancelling a programme
You can cancel a wash programme at
any time after it has started.
 Touch and hold the Start/Stop sensor
until the time display switches to
:.
The water will be pumped away. As
soon as the  symbol in the control
panel goes out, the programme has
been cancelled.
 Open the door.
Selecting a different programme after
cancelling the programme
Removing laundry after cancelling
the programme
If you want to remove the laundry when
it is dripping wet:
 Open the door.
 Remove the laundry.
If you want to remove the laundry after
it has been spun (damp):
 Open the door.
 Close the door.
 Turn the programme selector to
Drain/Spin.
Tip: Select an appropriate spin speed.
Interrupting a programme
 Turn the programme selector to the
 position.
The washing machine switches off.
 Close the door.
 To continue: turn the programme selector to the position of the wash programme that was started.
 Check that there is still detergent in
the dispenser drawer. Add more detergent if necessary.
Tip: If  appears in the time display,
the programme selector is in the incorrect position.
 Turn the programme selector to the
programme you want and start it by
pressing the Start/Stop sensor.
38
Changing the programme sequence
Adding or removing laundry
You can add or remove laundry at the
start of a wash programme as long as
the  symbol is flashing in the control
panel.
 Briefly touch the Start/Stop sensor.
The programme will stop and the door
will unlock.
 Pull open the door.
 Add or remove items.
 Close the door.
 Touch the Start/Stop sensor.
The programme will continue.
39
Garment care label symbols
Washing
Drying
The figure quoted in the bucket is the
maximum temperature the garment
can be washed at. The number of
bars under the symbol indicates the
level of agitation permitted.
The number of dots indicates the drying temperature

No bar under the symbol:
= normal agitation

One bar under the symbol:
= reduced agitation

Two bars under the symbol:
= much reduced agitation

Hot iron (max. sole plate temp.
approx. 200 °C)

Hand wash (if no temperature is
specified, use the lowest temperature or cold)

Medium hot iron (max. sole
plate temp. approx. 150 °C)

Do not wash

Cool iron (max. sole plate temp.
approx. 110 °C).

Normal temperature

Low temperature

Do not tumble dry
Ironing
The number of dots indicates the ironing temperature
Programme selection examples
Programme
Do not steam iron garments
carrying this symbol as this
could cause irreversible damage.
Garment care label
symbols
Cottons

Minimum iron

Delicates

Woollens 

Express 20


Do not iron
Professional cleaning


Dry clean only. The letters indicate the type of cleaning agent required.

Professional Wet Clean only

Do not dry clean
Bleaching
40

Any oxidising bleaching agent
can be used

Only use an oxygen based
bleach or a non-chlorine bleach

Do not bleach
Detergent
The correct detergent
Dispensing aids
All detergents produced for automatic
washing machines are suitable. Follow
the manufacturer's instructions and
dosage recommendations on the packaging.
Use dispensing aids, (e.g. balls) if these
are supplied with the detergent, particularly when using liquid detergent.
For users in Asia:
please use a low foaming detergent
suitable for use in front-loading machines
When purchasing detergent buy refill
packs wherever possible. This helps reduce the amount of waste packaging.
The right amount to dispense
will depend on the following:
– the soiling level of the load
– the quantity of the laundry
– the water hardness level.
Check with your local water supplier
if you do not know the hardness level
in your area.
Refill packs of detergent
Fabric conditioner and liquid
starch
Fabric conditioner
makes garments soft to handle and
helps prevent static cling when tumble
drying.
Starch
stiffens and gives body to items of laundry, e.g. shirts, tablecloths and bed
linen.
Water softeners
A water softener can be used to cut
down on the use of detergents in areas
with water hardness levels II and III.
Dispense according to the amount specified on the packaging. First add detergent and then the water softener.
You can then use the recommended
amount of detergent for water hardness
level I.
Water hardness levels
Hardness
scale
Hardness level
in mmol/l
German scale
°d
I (soft)
0 – 1.5
0 – 8.4
II (medium)
1.5 – 2.5
8.4 – 14
III (hard)
above 2.5
above 14
41
Detergent
Miele recommended detergents
Miele detergents and care products have been specially designed for Miele washing machines. They are available to order via the internet at www.miele-shop.com
or from Miele.
Miele
UltraWhite
Miele
UltraColor
Miele
Cap 
Miele
Cap 
Miele
Cap 
Cottons 


–


Cottons


–


Minimum iron
–

–


Delicates
–

, , 

–
Woollens 
–
–
, 
–
–
Shirts


–


Express 20
–

–

–
Dark garments /
Denim
–

–

–
Outerwear
–
–

–
–
Proofing
–
–
–

–
Separate rinse /
Starch
–/–
–/–
–/–
/–
–/–
 Recommended
 Sport
 SilkCare
–
 Down
 Fabric conditioner
 Outdoor
 Reproofing
 WoolCare
 Booster
42
Not recommended
Detergent
Recommended detergents in accordance with Directive
(EU) Nr. 1015/2010
The recommendations apply to the temperature ranges given in the Programme
chart.
Universal
Coloureds
Delicates and
woollens
Specialist
detergent
Cottons 


–
–
Cottons


–
–
Minimum iron
–

–
–
Delicates
–
–

–
Woollens 
–
–


Shirts


Express 20
–
–
–
1)
–
–
1)

Dark garments / Denim
–

–

Outerwear
–
–


 Recommended
1)
Liquid detergent
–
2)
Powder detergent
Not recommended
43
Detergent
Dispensing fabric conditioner
and liquid starch at the end of
the programme
Adding fabric conditioner or liquid
starch separately
Prepare the starch in accordance with
the manufacturer's instructions on the
packaging.
Tip: When adding fabric softener, activate the Water plus extra.
 Add fabric conditioner to the  compartment or insert the appropriate
capsule.
 Add liquid starch to the  compartment and powder or viscous starch to
the  compartment.
 Add the fabric conditioner or liquid
starch to the  compartment or insert the appropriate capsule. Do not
exceed the maximum level mark.
The agent will be automatically dispensed in the last rinse. At the end of
the programme a small amount of water
will remain in the  compartment.
Starch can make the siphon tube
sticky.
If starching frequently, thoroughly
clean the dispenser compartment,
especially the siphon tube regularly.
44
 Select the Separate rinse/Starch programme.
 Change the spin speed if necessary.
 Activate the Cap  sensor if using a
capsule.
 Touch the Start/Stop sensor.
Colour run and dye removers/dyes
 Do not use colour run or dye removers in this washing machine.
They can cause corrosion in the machine.
Dyes suitable for use in domestic washing machines can be used. However,
please note that the salt used in the
dyeing process can cause corrosion to
stainless steel components in the machine if you dye frequently. Always observe the manufacturer's instructions
carefully.
Cleaning and care
Cleaning the drum
(Hygiene info)
Washing at low temperatures and/or using liquid detergent can cause bacteria
and unpleasant odours to build up in
the washing machine. Use the Cottons
90 °C programme to clean the machine.
Run this programme at the latest when
the  indicator lights up.
Cleaning the detergent dispenser drawer
Washing at low temperatures and the
use of liquid detergent can lead to a
build-up of mould and bacteria in the
detergent dispenser drawer.
 For hygiene reasons, clean the entire
drawer at regular intervals.
External casing and fascia
panel
 Disconnect the machine from the
mains electricity supply before cleaning or maintenance.
 The washing machine must not
be hosed down.
 Clean the casing and fascia panel
with a mild non-abrasive cleaning
agent or soap and water using a well
wrung-out cloth. Wipe dry with a soft
cloth.
 The drum can be cleaned with a proprietary stainless steel cleaning
agent, following the manufacturer's
instructions on the packaging.
 Pull out the detergent dispenser
drawer until a resistance is felt. Press
down the release button and at the
same time pull the drawer right out of
the machine.
 Clean the drawer with hot water.
 Do not use solvents, abrasive
cleaners, glass cleaners or multi-purpose cleaning agents. These could
damage plastic surfaces and other
parts.
45
Cleaning and care
Cleaning the siphon tube and the
channel
Cleaning the detergent dispenser
drawer housing
Liquid starch can cause the siphon
to become clogged. Make sure that
you clean the siphon and siphon
tube particularly thoroughly after using liquid starch a few times.
 Use a bottle brush to remove detergent residues and limescale from the
jets inside the detergent dispenser
drawer housing.
 Clean the siphon.
1. Remove the siphon from the  compartment and rinse under hot running
water. Clean the siphon tube at the
same time.
2. Replace the siphon.
 Clean the fabric conditioner channel
with a brush and hot water.
46
 Replace the detergent dispenser
drawer.
Tip: Leave the detergent dispenser
drawer slightly open to allow it to dry.
Cleaning and care
Cleaning the water inlet filters
The washing machine has two filters to
protect the water inlet valve. These filters should be checked every six
months or so, or more often if there are
frequent interruptions to the water supply.
To clean the filter in the water inlet
valve:
 Using pliers, carefully loosen the
ribbed plastic nut on the inlet valve
and unscrew.
To clean the filter in the union in the
open end of the inlet hose:
 First turn off the stopcock.
 Unscrew the inlet hose from the stopcock.
 Use pointed nose pliers to withdraw
the plastic filter by the bar (see illustration).
 Clean the filter.
 Replace the filter in the reverse order.
 Remove the rubber seal 1 from the
recess.
 Using pointed pliers, take hold of the
plastic filter bar 2 and remove it.
 Clean the filter.
After cleaning the filters, turn on the
stopcock and check the connection
is watertight. If water drips out,
tighten the connection.
The two filters must be put back in
place after cleaning.
 Replace the filter and seal back in the
reverse order and reconnect the
hose.
47
Problem solving guide
Minor faults in the performance of the washing machine, some of which may result
from incorrect operation, can be put right without contacting the Service Department.
The following guide may help you to find the reason for a fault, and to correct it.
You should, however, note the following:
 Repair work to electrical appliances should only be carried out by a suitably
qualified person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The
manufacturer cannot be held liable for unauthorised work.
The programme does not start
Problem
Cause and remedy
The control panel remains dark.
There is no power to the machine.
 Check whether the mains plug is plugged in and
switched on.
 Check whether the fuse or circuit breaker has
tripped.
The washing machine has switched off automatically
to save energy.
 Switch the washing machine on again by turning
the programme selector.
 and  alternately ap- The door is not closed properly. The door lock could
pear in the time display. not engage.
 Close the door again.
 Start the programme again.
If the fault message appears again, contact the
Service Department.
48
Problem solving guide
The programme is cancelled and a fault indicator light lights up
in the control panel
Problem
Cause and remedy
The fault indicator light
 lights up,  and  appear alternately in the
time display and the
buzzer sounds.
The water inlet is blocked or restricted.
 Check whether the stopcock is opened properly.
 Check whether the inlet hose is kinked.
 Check whether the water pressure is too low.
The fault indicator light
 lights up,  and  appear alternately in the
time display and the
buzzer sounds.
The water outlet is blocked or restricted.
The drain hose has been fixed too high.
 Clean the drain filter and the drain pump.
 The maximum delivery head is 1 m.
The filter in the water inlet is blocked.
 Clean the filter.
The fault indicator light The water protection system has reacted.
 lights up,  and 
 Close the stopcock.
appear alternately in the  Call the Service Department.
time display and the
buzzer sounds.
 and  alternately
appear in the time display and the buzzer
sounds.
There is a fault.
 Disconnect the washing machine from the mains
electricity supply, either by switching off at the wall
socket and withdrawing the plug, or by disconnecting the relevant fuse on the mains fuse board.
 Wait at least 2 minutes, before reconnecting the
washing machine to the mains electricity supply.
 Then switch the washing machine on again.
 Restart the programme.
If the fault message appears again, contact the
Service Department.
49
Problem solving guide
During the programme, a symbol appears in the time display
Message
Cause and remedy

The programme selector was moved to a different position after the programme had started.
 Turn the programme selector back to the original
position.
lights up
The programme has been interrupted.
 Open the door.
 Close the door.
At the end of the programme, an indicator light lights up in the
control panel
Problem
Cause and remedy
The indicator light 
lights up.
Excessive foam has built up during washing.
 Use less detergent next time, and follow the manufacturer's recommended dosage amounts on the
packaging.
The indicator light 
lights up.
A programme using a temperature above 60 °C has
not been run for a long time.
 In order to prevent bacteria and unpleasant odours
building up in the machine, run the Cottons 90 °C
programme using Miele machine cleaner or
powder detergent.
50
Problem solving guide
General problems with the washing machine
Problem
Cause and remedy
The washing machine
smells.
The  indicator light was ignored. A wash programme using a temperature above 60 °C has not
been run for a long time.
 In order to prevent bacteria and unpleasant odours
building up in the washing machine, run the Cottons 90 °C programme using Miele machine
cleaner or a universal powder detergent.
The door and the detergent dispenser drawer were
left open after washing.
 Leave the door and the detergent dispenser
drawer slightly open to allow them to dry.
The machine shakes
during the spin cycle.
The machine feet are not level.
 Level the machine and adjust the feet correctly.
The laundry has not
The machine detected an imbalance during the final
been spun properly and spin cycle and reduced the spin speed automatically.
is still wet.
 Include both large and small items in the load as
this will give better distribution during spinning.
Strange pump noises
can be heard.
This is not a fault.
These slurping noises occur at the end of the pump
sequence as a normal part of operation.
Large amounts of deter- The water pressure is too low.
gent residue remain in
 Clean the water inlet filter.
the detergent dispenser  It may be useful to select the Water plus option.
drawer.
Powder detergent used in conjunction with water
softeners tends to become sticky.
 In future, add washing powder into the dispenser
drawer first, and then add the water softener.
51
Problem solving guide
General problems with the washing machine
Problem
Cause and remedy
Fabric conditioner is not The siphon tube is not correctly positioned or is
completely dispensed
clogged.
or too much water re Clean the siphon, see "Cleaning and care - Cleanmains in the  coming the detergent dispenser drawer".
partment.
At the end of the programme there is still liquid in the capsule.
The small pipe in the detergent dispenser drawer onto
which the capsule is placed is blocked.
 Clean the small pipe.
This is not a fault.
For technical reasons a small amount of water will remain in the capsule.
There is water next to
the capsule in the fabric
conditioner compartment.
The Cap  sensor was not activated or an empty
capsule was not removed at the end of the last programme.
 Make sure that you remember to activate the Cap
 sensor the next time you insert a capsule.
 Remove and then dispose of the empty capsule at
the end of each programme.
The small pipe in the detergent dispenser drawer onto
which the capsule is placed is blocked.
 Clean the small pipe.
52
Problem solving guide
An unsatisfactory wash result
Problem
Cause and remedy
Liquid detergent does
not give the required
result.
Liquid detergents usually contain no bleaching
agents. They do not remove fruit, coffee and tea
stains.
 Use a general purpose powder detergent containing a bleaching agent.
 Use the appropriate capsule or add stain removers
to the  compartment.
 Never put stain removers and liquid detergent together in the dispenser drawer.
Grey, greasy particles
Insufficient amounts of detergent were used to break
cling to washed laundry. down the particles of grease in heavily soiled laundry.
 Use more detergent.
 Before washing the next load run a Cottons 60°C
programme with powder detergent but without a
load.
White residues which
look like powder detergent are seen on dark
textiles after washing.
The detergent contained compounds (zeolites) to aid
water softening which are not soluble in water. These
have ended up on the laundry.
 Try and brush off the residues with a soft brush
once the laundry is dry.
 Wash dark textiles using a detergent which contains no zeolites. Liquid detergents usually contain
no zeolites.
 Use the Dark garments / Denim programme for
dark coloured laundry.
53
Problem solving guide
The door will not open
Problem
Cause and remedy
The door cannot be
pulled open during a
programme.
The door is locked during a programme.
 Touch the Start/Stop sensor to cancel the programme.
The programme is cancelled, the door will unlock and
you will be able to pull it open.
There is still water in the drum and the machine is unable to drain.
 Clean the drain filters and the drain pump as described in "Opening the door in the event of a
blocked drain outlet and/or power failure".
After the programme is For safety reasons the drum door cannot be opened if
cancelled, flashing bars the suds temperature is higher than 55 °C.
......... appear  Wait until the temperature in the drum has dein the time display.
creased and the bars have stopped flashing in the
display.
 and  alternately ap- The door lock has jammed.
pear in the time display.  Call the Service Department.
54
Problem solving guide
Opening the door in the event
of a blocked drain outlet and/
or power failure
 Switch off the washing machine.
Procedure for draining the washing
machine
When draining water from the machine, do not unscrew the drain filter
completely or take it right out.
 Place a suitable container, e.g. a
Miele universal oven tray under the
access panel.
 Open the drain pump access panel.
Blocked drain outlet
If the drain outlet is blocked, a large
quantity of water can remain in the
washing machine.
 If laundry has been washed at a
high temperature, water draining out
of the machine will still be hot.
Danger of scalding!
Take care when draining the machine.
 Slowly and carefully unscrew the filter
to let the water out. Be careful not to
release too much water at once. If the
flow of water is too strong, some water can seep into the washing machine base and activate the water
protection float switch. This will prevent the washing machine from functioning.
 Tighten the drain filter back up again
if you need to interrupt the flow of
water.
Once the flow of water ceases:
55
Problem solving guide
Opening the door
 Always make sure that the drum
is stationary before reaching in to remove laundry. Reaching into a moving drum is extremely dangerous.
 Remove the drain filter completely.
 Use a screwdriver to unlock the door.
 Pull open the door.
 Clean it thoroughly.
 Remove any foreign objects (e.g. buttons, coins, etc.) and fluff from the filter housing. Turn the impeller by hand
to check that it rotates freely.
 Replace the drain filter correctly and
tighten it securely.
 Make sure the drain filter is securely tightened. Otherwise there is a
risk of water leakage during use.
56
After sales service
Contact in case of malfunction
Optional accessories
In the event of any faults which you
cannot remedy yourself, please contact
your Miele Dealer or Miele Service.
Optional spare parts and accessories
for this washing machine are available
from your Miele Dealer, the Miele Spare
Parts Department or via the internet at
www.miele-shop.com.
Contact information for Miele Service
can be found at the end of this document.
Please note that telephone calls may be
monitored and recorded for training
purposes and that a call-out charge will
be applied to service visits where the
problem could have been resolved as
described in this booklet.
Please quote the model and serial number of your appliance when contacting
Miele. This information can be found on
the data plate.
The data plate is found above the
porthole glass when the door is
opened.
Please note that telephone calls may
be monitored and recorded for training
purposes.
Warranty
The appliance warranty is valid for 2
years from date of purchase. In the UK,
you must activate your cover by calling
0330 160 6640 or registering online at
www.miele.co.uk.
For further information on country specific warranty terms and conditions,
please refer to your warranty booklet or
contact Miele Customer Service.
57
Installation and connection
Front view
a Inlet hose (tested to withstand pressure of at least 7,000 kPa)
b Electrical supply cable
c Flexible drain hose (with detachable
swivel elbow)
d Control panel
e Detergent dispenser drawer
58
f Door
g Access to drain filter, drain pump and
emergency release
h Four height adjustable feet
Installation and connection
Rear view
a Drain hose
b Transport clips for electrical supply
cable, inlet and drain hoses
e Inlet hose (tested to withstand pressure of at least 7,000 kPa)
f Safety caps for transit bars
c Electrical supply cable
g Transport clips for inlet and drain
hoses and for storing transit bars
d Protruding lid for holding when movwhen not in use
ing the machine
59
Installation and connection
Installation surface
A concrete floor is the most suitable installation surface for a washing machine, being far less prone to vibration
during the spin cycle than wooden
floorboards or a carpeted surface.
Please note:
 The machine must be level and securely positioned.
 To avoid vibrations during spinning,
the machine should not be installed
on soft floor coverings.
If installing on a wooden joist floor:
 We recommend a plywood base at
least 59 x 52 x 3 cm). The base
should span several joists and be
bolted to the joist and not only the
floorboards. Check for the presence
of pipes and cables first.
Transporting the washing machine to its installation site
 Make sure the fixings at the back
of the lid are secure.
Otherwise there is a danger of the lid
being pulled off when carrying the
machine.
Before carrying the machine check
that the lid is secure where it protrudes at the back of the machine.
 Carry the washing machine by the
front feet and the protruding lid at the
back.
Removing the transit bars
Tip: If possible, install the machine in a
corner, as this is usually the most stable
part of the floor.
 There is the danger of the washing machine moving about during
spinning and falling off a plinth.
For this reason, if the machine is installed on a raised plinth (concrete or
brick), it has to be secured against
slippage using an MTS floor/plinth
mounting kit (available from Miele).
60
 To remove the left and right covers
1. Pull on the attached stopper,
2. then use a screwdriver to release the
catches at the top and bottom.
Installation and connection
 Using the spanner supplied, turn the
left-hand transit bar 90°, then
 Turn the right-hand transit bar 90°,
then
 pull the transit bar out.
 pull the transit bar out.
61
Installation and connection
 To avoid the risk of injury, the
holes for the transit bars must be
covered after the transit bars have
been removed.
 Secure the transit bars to the back of
the washing machine. Make sure the
top catch is located above the holder.
 The washing machine must not
 Plug the holes with the plastic caps
as illustrated.
be moved without the transit bars in
place. Store them as shown or keep
them in a safe place for future use.
They must be re-fitted if the machine
is to be moved again (e.g. when
moving house).
Re-fitting the transit bars
Re-fitting is carried out by reversing the
procedure.
62
Installation and connection
Levelling the machine
The washing machine must stand perfectly level on all four feet to ensure
safe and proper operation.
Incorrect installation may increase electricity and water consumption and may
cause the machine to move about.
Screwing out and adjusting the feet
The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the machine is delivered.
 Use a spirit level to check that the
washing machine is standing level.
 Hold foot 1 securely with a pipe
wrench. Turn counter nut 2 again using the spanner supplied until it sits
firmly up against the housing.
 All four counternuts must be
firmly up against the housing. Please
also check this for the feet which did
not need adjustment. Otherwise
there is a danger of the machine
moving about.
 Using the spanner supplied turn
counter nut 2 in a clockwise direction.
Then turn counter nut 2 together with
foot 1 to unscrew.
63
Installation and connection
Building under a continuous worktop/ in a kitchen run
 The washing machine lid cannot
be removed.
This washing machine (with lid intact)
can be pushed under a worktop if there
is space to do so.
Washer-dryer stack
The washing machine can be combined
with a Miele tumble dryer in a washerdryer stack. The appropriate "WTV"
stacking kit* to match your dryer is required.
All parts marked* are available from
your Dealer or Miele.
Please note:
a = at least 2 cm
b = WTV without drawer: 172 cm
WTV with drawer: 181 cm
c = 68 cm
64
Installation and connection
The water protection system
The Miele water protection system protects all parts of the washing machine
from water damage.
The system consists of three main components:
– the inlet hose
– the electronic unit and drainage and
overflow protection
– the drain hose
Inlet hose
– Protection against bursting
The inlet hose is tested to withstand
pressure of at least 7,000 kPa.
Electronic unit and washing machine
housing
– Sump
Any leaking water is collected in a
sump in the base of the machine. A
float switches off the water inlet
valves, preventing any more water
from flowing into the machine and
water in the suds container is
pumped away.
– Overflow protection
This prevents the washing machine
taking in too much water. If the water
level exceeds a certain level, the
drain pump switches in and pumps
the excess water away.
Drain hose
The drain hose is protected by a ventilation system which prevents the washing
machine from being emptied completely.
65
Installation and connection
Connection to the water supply Maintenance
The washing machine should be connected to a mains water supply in accordance with current local and national
safety regulations. The German authorities do not require it to have a non-return valve as the washing machine has
been designed to comply with DIN regulations.
The machine is designed to operate
with a flow pressure of between 100
and 1,000 kPa. If it is higher than
1,000 kPa it is essential to fit a pressure
reducing valve.
Connection to the mains water supply
should incorporate a mains stopcock
with ¾" threaded union. The stopcock
should be fitted by a qualified plumber.
 The connection point is subject
to mains water pressure. Turn on the
stopcock slowly and check for leaks.
Correct the position of the washer
and union if appropriate.
The washing machine is not suitable
for connection to a hot water supply.
66
Only use a genuine Miele hose that has
been pressure tested to withstand at
least 7,000 kPa should you ever need a
replacement.
A filter is located in the open end of
the inlet hose and another in the intake point to protect the inlet valve.
Neither filter may be removed.
Hose extension
Longer hoses 2.5 or 4.0 m in length are
available from your Miele Dealer or
Miele as optional extras.
Installation and connection
Water drainage
Please note:
The suds are drained through a drain
pump with a 1 m delivery head. For the
water to drain freely, the hose must be
free of kinks.
If required, the hose can be extended to
a length of up to 5 m. Accessories are
available from Miele or from your Miele
dealer.
For a delivery head of more than 1 m
(up to a max. of 1.8 m) a replacement
drain pump will need to be fitted.
Please contact Miele for advice.
For a delivery head of 1.8 m the hose
can be extended to a length of up to 2.5
m. Accessories are available from Miele
or from your Miele dealer.
Drainage options:
a Adapter
b Spigot nut
c Hose clip
d End of the hose
Please note:
 Fit adapter  to the sink drain outlet
using nut .
– Hook the hose over the edge and
secure it.
 Attach the end of hose  to adapter
.
– If the water is pumped into a
washbasin, make sure that it can
drain away freely. Otherwise there
is a risk of water overflowing or of
some of the drained water being
sucked back into the machine.
 Use a screwdriver to tighten hose clip
 up close to the nut.
1. Directed into a sink or basin:
2. Connected securely to a plastic drain
pipe with a rubber nipple (there is no
need to use a siphon).
3. Connected securely to a floor drain
(gully).
4. Connected securely to a washbasin
with plastic nipple.
67
Installation and connection
Electrical connection U.K.
Non-rewireable plugs BS 1363
All electrical work should be carried out
by a suitably qualified and competent
person, in strict accordance with current national and local safety regulations (BS 7671 in the UK).
The fuse cover must be refitted when
changing the fuse, and if the fuse cover
is lost, the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is embossed in words on the base of the
plug (as applicable to the design of plug
fitted).
Ensure power is not supplied to the appliance until after installation work has
been carried out.
The appliance is supplied with a mains
cable with moulded plug ready for connection to a 230-240V mains supply.
Please ensure the connection data
quoted on the data plate match the
household mains supply.
Connection should be made via a suitable switched socket which is easily accessible after installation.
For extra safety it is advisable to protect
the machine with a suitable residual
current device (RCD). Contact a qualified electrician for advice.
Do not connect via an extension lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
68
Replacement fuses should be ASTA approved to BS 1362 and have the correct
rating. Replacement fuses and fuse
covers may be purchased from your
local electrical supplier.
WARNING: THIS APPLIANCE MUST
BE EARTHED
Technical data
Height
850 mm
Width
596 mm
Depth
636 mm
Depth with door open
1054 mm
Height for building under
850 mm
Width for building under
600 mm
Weight
Approx. 100 kg
Capacity
8 kg dry laundry
Voltage
See data plate
Connected load
See data plate
Fuse rating
See data plate
Consumption data
See "Consumption data"
Minimum flow pressure
100 kPa
Maximum flow pressure
1000 kPa
Inlet hose length
1.60 m
Drain hose length
1.50 m
Mains connection cable length
2.00 m
Delivery head max.
1.00 m
Maximum drainage length
5.00 m
LEDs
Class 1
Test certificates awarded
See data plate
69
Technical data
Data sheet household washing machines
In acc. with delegated regulation (EU) No. 1061/2010
MIELE
Model name / identifier
Rated capacity
WDD 030 WCS
1
8,0 kg
Energy efficiency class
A+++ (most efficient) to D (least efficient)
A+++
2
Annual energy consumption (AEc)
177 kWh/year
Energy consumption of the standard "60°C cotton programme" at full load
0,90 kWh
Energy consumption of the standard "60°C cotton programme" at partial load
0,88 kWh
Energy consumption of the standard "40°C cotton programme" at partial load
0,53 kWh
Weighted power consumption in off-mode (Po)
0,30 W
Weighted power consumption in the left-on mode (Pl)
2,50 W
Weighted annual water consumption (AWc)
3
10.120 Litres/year
Spin-drying efficiency class
A (most efficient) to G (least efficient)
Maximum spin speed
B
4
Remaining moisture content
1.400 U/min
4
53 %
Standard programme to which the information in the label and the fiche relates
5
Cottons 60/40 with
arrow
Programme time of the standard programme
60°C cotton programme (full load)
179 min
60°C cotton programme (partial load)
179 min
40°C cotton programme (partial load)
179 min
Duration of the 'left-on' mode (Tl)
6
15 min
Airborne acoustical noise emissions
Washing phase
7
50 dB(A) re 1 pW
7
74 dB(A) re 1 pW
Spinning phase
Built-in
-
This product does not release silver ions during the washing cycle.
● Yes, standard feature
1
2
In kg of cotton for the standard "60 °C cotton programme "at full load or the "40 °C cotton programme" at full load, whichever is the lower.
Based on 220 standard washing cycles for cotton programmes at 60 °C and 40 °C at full and partial
load, and the consumption of the low-power modes. Actual energy consumption will depend on how
the appliance is used.
70
Technical data
3
4
5
6
7
Based on 220 standard washing cycles for cotton programmes at 60 °C and 40 °C at full and partial
load. Actual water consumption will depend on how the appliance is used.
Attained for the standard "60 °C cotton programme" at full load or the standard "40 °C cotton programme" at partial load, whichever is the lower, and remaining moisture content attained for the
standard "60 °C cotton programme" at full load or the standard "40 °C cotton programme" at partial
load, whichever is the greater.
These programmes are suitable to clean normally soiled cotton laundry and are the most efficient
programmes in terms of combined energy and water consumption.
If the household washing machine is equipped with a power management system.
For the standard "60 °C cotton programme" at full load.
71
Consumption data
Load
Energy
Water
Duration
Residual
moisture
kg
kWh
Litres
h:min
%
60 °C
8.0
0.90
49
2:59
53
60 °C
4.0
0.88
48
2:59
53
40 °C
4.0
0.53
39
2:59
53
90 °C
8.0
2.10
49
2:29
53
60 °C
8.0
1.35
49
2:29
53
60 °C
4.0
1.15
48
2:19
53
40 °C
8.0
0.98
54
2:39
53
20 °C
8.0
0.35
54
2:39
53
Minimum iron
30 °C
3.5
0.45
52
1:59
30
Delicates
30 °C
2.0
0.25
30
1:09
–
Woollens 
30 °C
2.0
0.23
35
0:38
–
1)
40 °C
3.5
0.34
30
0:20
–
60 °C
2.0
0.77
40
1:31
–
Cottons *
Cottons
Express 20
Shirts
1)
Short extra option activated
Note for test institutes
*
Test programme in accordance with EN 60456 and energy label with
Directive 1061/2010
Consumption data can vary from the nominal values given depending on water
pressure, water hardness, water inlet temperature, room temperature, type and
volume of load, fluctuations in the electricity supply and any extras selected.
72
Programmable functions
The programmable functions are used
to alter the machine's electronics to
suit changing requirements. Programmable functions can be altered at any
time.
The programming is carried out in eight
steps (, ,  ... ) using the sensor
controls.
Accessing the programming level
Pre-requisites:
– The washing machine is switched on
(the programme selector is pointing
to a wash programme).
Choosing and selecting a programmable function
The number of the programmable
function will appear in the time display
as  and a number: e.g. .
 Touch the  or  sensor to scroll to
the next or previous programmable
function:
Programmable functions

Keypad tone

Lock code

Control panel standby status
– The washing machine door is open.
 Memory
 Touch the Start/Stop sensor and
leave your finger on it whilst carrying
out steps -.
 Additional pre-wash time - Cottons
 Close the washing machine door.

Soak duration
 Gentle action
Wait until the Start/Stop sensor lights
up constantly ...
 Reduced temperature
 ... and then take your finger off the
Start/Stop sensor.

Water plus

Water plus level

Maximum rinse level

Suds cooling

Anti-crease action
After approx. four seconds,  will light
up in the time display.
 Backlight brightness
 Confirm the selected programmable
function by pressing the Start/Stop
sensor.
73
Programmable functions
Editing and saving the programmable function
Exit programming level
You can either switch a programmable
function on or off or select different options.
The option you have selected is now
stored in memory. You can change it
again at any time.
 Touch the  or  sensor to switch
the programmable function on/off or
to select an option:
 Keypad tone
 Turn the programme selector to .
Programmable function
Available options




X
O
X

O
X

X
O

O
X

O
X
X
X
O
X
X
O
X
X
O
X
X
X
X
O
X


O
X

O
X



O
X

O
X

X
O

X
X = Can be selected
O = Factory setting
74


 – 
Each touch of a sensor is confirmed
with an audible tone.
Options
 = Keypad tone switched off

X
X
= Keypad tone switched on
(factory default setting)
Programmable functions
 Lock code
The lock code prevents the washing
machine being used without your
knowledge.
When the code has been activated, you
have to enter a code after switching the
washing machine on. Otherwise the
washing machine cannot be operated.
Options
 = Lock code switched off (factory default setting)

= Lock code is switched on
Using the washing machine with a
lock code
The code is 125 and cannot be altered.
 Switch on the washing machine.
   appears in the time display and
the  and  sensors light up.
 Touch the  sensor.
   appears in the time display.
 Confirm the number with the Start/
Stop sensor.
The first number was saved and you
can now enter the second number using the  and  sensors.
 Control panel switch-off
status
To save energy the time display and
sensors will go out after 10 minutes,
and only the Start/Stop sensor will
flash slowly.
Options
 = Off
The time display and sensors
will remain lit up while the
washing machine is switched
on

= On (factory default setting)
The time display and sensors
will switch off after 10 minutes
if
– no further selection is made
after switching the machine
on
– the programme is started
However; the time display and
sensors will remain lit up for 10
minutes after a delay start time
has elapsed, after the end of
the programme or at the end of
the anti-crease phase.
 Also enter the second and third numbers and confirm the numbers with
the Start/Stop sensor.
The lock is released and a wash programme can now be selected and started.
75
Programmable functions
 Memory
The washing machine will save the
last settings (temperature, spin speed
and some of the extras) selected for a
programme after the programme has
started.
When this programme is chosen again,
these saved settings will appear in the
display.
Options
 = Memory is switched off (factory default setting)

= Memory is switched on
 Longer pre-wash Cottons
If you require a longer pre-wash you
can extend the pre-wash time.
Options
 = No increase in the pre-wash
time (factory default setting)

= + 6 minutes increase in the
pre-wash time
 = + 9 minutes increase in the
pre-wash time
 = + 12 minutes increase in the
pre-wash time
 Soak duration
You can set a duration for the soak
process of between 30 minutes and
two hours.
You can select the duration in 30 minute
increments. When the Soak Extra option
is selected the laundry will be soaked
for the duration selected.
Options

 = 1 hour soak duration
 = 1 hour 30 minutes soak duration
4 = 2 hours soak duration
 Gentle action
Activating gentle action reduces the
drum action and is suitable for washing lightly soiled items more gently.
Gentle action can be activated for the
Cottons and Minimum iron programmes.
Options
 = Gentle action is switched off
(factory default setting)

76
= 30 minutes soak duration
(factory default setting)
= Gentle action rhythm is
switched on
Programmable functions
 Reduce temperature
The boiling point for water is lower at
high altitudes. In order to avoid water
boiling, Miele recommend activating
the reduce temperature setting at altitudes of more than 2000 m above sea
level. The maximum temperature is reduced to 80 °C even when a higher
temperature is selected.
Options
 = The reduce temperature setting
is switched off (factory default
setting)

= The reduce temperature setting
is turned on
 Water plus
You can determine the amount of water used if the Water plus extra is selected.
Options

= More water is used in the wash
and rinse stages (factory default setting)
 = An extra rinse is carried out
 = The water level is increased in
the wash and rinse stages and
an additional rinse is carried
out
 Water plus level
There are three different water levels
which can be selected by activating
the Water plus extra.
Options

= No higher water level (factory
default setting)
 = Water level increase by 1 level
when washing and rinsing
 = Water level increase by 2 levels
when washing and rinsing
 = Water level increase by 3 levels
when washing and rinsing
 Maximum rinse level
The water level in the rinse cycle can
be permanently set to the highest
value.
This function is useful for allergy sufferers as it achieves an excellent rinse result. Water consumption will increase.
Options
 = Maximum rinse level is
switched off (factory default
setting)

= Maximum rinse level is
switched on
77
Programmable functions
 Suds cooling
When this is activated, additional water flows into the drum at the end of
the main wash to cool the suds down.
Hot suds can damage plastic drainage
pipes.
Suds cooling takes place when a temperature of 70 °C or higher is selected
for the Cottons programme.
 Backlight brightness
dimmed
The brightness of the dimmed sensors
in the control panel can be set to one
of seven different levels.
The brightness changes as soon as you
select a different setting.
Options
Suds cooling should be activated:

– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
 = Lightest level
– where drainage pipes do not comply
with DIN 1986.
Options
 = Suds cooling is switched off
(factory default setting)

= Suds cooling is switched on
 Anti-crease
The anti-crease function helps prevent
creasing if laundry is not going to be
removed immediately after the end of
the programme.
The drum continues to turn at intervals
for up to 30 minutes at the end of the
programme. The door can be opened at
any time.
Options
 = The anti-crease function is
switched off

78
= The anti-crease function is
switched on (factory default
setting)
= Darkest level

 = (Factory default setting)
Optional accessories
Detergent, fabric care, additives and
machine care products are available for
this washing machine. All the products
have been designed for Miele washing
machines.
Specialist detergents
These and many other useful products
can be ordered via the internet at
www.miele-shop.com or from Miele
(see end of this booklet for contact details).
Outerwear
Specialist detergents are available as
capsules  in convenient single dose
amounts or in a handy bottle.
– Liquid detergent for outerwear and
performance clothing
– Cleans with care and is gentle on colours
– With lanolin to care for and condition
membrane fabric
Sport
Detergent
UltraWhite
– Multi-purpose powder detergent
– Liquid detergent for sportswear and
fleece garments
– Neutralises unpleasant odours
– Retains the shape of the items
– For white and light-coloured laundry
as well as heavily soiled cotton items
Down
– Effective stain removal even at low
temperatures
– Liquid detergent suitable for pillows,
sleeping bags, and down-filled items
UltraColor
– Retains the elasticity of down and
feather-filled items
– Liquid detergent for coloured items
– For coloured and dark fabrics
– Protects bright colours from fading
– Effective stain removal even at low
temperatures
– Retains the breathability of downfilled items
– Prevents down filling clumping together
Wool and delicates detergent
– Liquid detergent for delicates
– Particularly suitable for woollen and
silk fabrics
– Cleans at temperatures as low as
20 °C, helps retain the shape of delicate items and protect colours
79
Optional accessories
WoolCare
Additive
– Liquid detergent for woollens and
delicates
Booster
– Includes a special wheat protein conditioning formula
– Helps prevent felting
– Gentle on colours
– For removing stains
– For white and coloured laundry
– Available as capsules  in convenient single dose amounts
– Only available as capsules 
Machine care
SilkCare
Machine cleaner
– Liquid detergent for silks
– For cleaning the washing machine
thoroughly and effectively
– Contains a special silk protein conditioning formula
– Gentle on colours
– Only available as capsules 
Fabric care
Fabric care is available as capsules 
in convenient single dose amounts or in
a handy bottle.
– Removes grease, bacteria, and associated unpleasant odours
– Use 1–3 times per year
Descaling agent
– removes heavy limescale deposits
– Mild and gentle with natural citric
acid
Proofing agent
Water softener tablets
– For proofing microfibre fabrics, e.g.
rain coats
– Reduces the amount of detergent
needed for hard water
– Retains the breathability of fabrics
– Less detergent residue in fabrics
Fabric conditioner
– Less chemicals in waste water due to
reduced amount of detergent
– Fresh, natural fragrance
– Makes laundry soft to handle
80
United Kingdom
Miele Co. Ltd.
Fairacres, Marcham Road
Abingdon, Oxon, OX14 1TW
Customer Contact Centre Tel: 0330 160 6600
E-mail: mielecare@miele.co.uk
Internet: www.miele.co.uk
Australia
Miele Australia Pty. Ltd.
ACN 005 635 398
ABN 96 005 635 398
1 Gilbert Park Drive
Knoxfield, VIC 3180
Tel: 1300 464 353
Internet: www.miele.com.au
China
Miele (Shanghai) Trading Ltd.
1-3 Floor, No. 82 Shi Men Yi Road
Jing' an District
200040 Shanghai, PRC
Tel: +86 21 6157 3500
Fax: +86 21 6157 3511
E-mail: info@miele.cn,
Internet: www.miele.cn
Miele (Hong Kong) Limited
41/F - 4101, Manhattan Place
23 Wang Tai Road
Kowloon Bay, Hong Kong
Tel: (852) 2610 1025
Fax: (852) 3579 1404
Email:
customerservices@miele.com.hk
Website: www.miele.hk
India
Miele India Pvt. Ltd.
Ground Floor
Copia Corporate Suites
Plot No. 9, Jasola
New Delhi - 110025
Tel: 011-46 900 000
Fax: 011-46 900 001
E-mail: customercare@miele.in
Internet: www.miele.in
Ireland
Miele Ireland Ltd.
2024 Bianconi Avenue
Citywest Business Campus
Dublin 24
Tel: (01) 461 07 10
Fax: (01) 461 07 97
E-Mail: info@miele.ie
Internet: www.miele.ie
Malaysia
Miele Sdn Bhd
Suite 12-2, Level 12
Menara Sapura Kencana
Petroleum
Solaris Dutamas No. 1
Jalan Dutamas 1
50480 Kuala Lumpur, Malaysia
Phone: +603-6209-0288
Fax: +603-6205-3768
New Zealand
Miele New Zealand Limited
IRD 98 463 631
Level 2, 10 College Hill
Freemans Bay, Auckland 1011
New Zealand
Tel: 0800 464 353
Internet: www.miele.co.nz
Singapore
Miele Pte. Ltd.
163 Penang Road
# 04 - 03 Winsland House II
Singapore 238463
Tel: +65 6735 1191
Fax: +65 6735 1161
E-Mail: info@miele.com.sg
Internet: www.miele.sg
South Africa
Miele (Pty) Ltd
63 Peter Place, Bryanston 2194
P.O. Box 69434, Bryanston 2021
Tel: (011) 875 9000
Fax: (011) 875 9035
E-mail: info@miele.co.za
Internet: www.miele.co.za
Taiwan
K.E. & Kingstone Co., Ltd.
6th Fl., No. 120, Sec. 2
Jianguo N. Rd.
Taipei, Taiwan
TEL: +886 2 2502-7256
FAX: +886 2 2502-3077
E-mail: kenk@kenk.com.tw
Website:
www.kenk.com.tw/ke/miele
Thailand
BHIRAJ TOWER at EmQuartier
43rd Floor Unit 4301-4303
689 Sukhumvit Road
North Klongton Sub-District
Vadhana District
Bangkok 10110, Thailand
United Arab Emirates
Miele Appliances Ltd.
Gold & Diamond Park
Office No. 6-217
Sheikh Zayed Road
P.O. Box 11 47 82 - Dubai
Tel. +971 4 3044 999
Fax. +971 4 3418 852
800-MIELE (64353)
E-Mail: info@miele.ae
Website: www.miele.ae
Manufacturer: Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany
WDD 030 EcoPlus&Comfort

en-GB
M.-Nr. 10 834 320 / 00
Download PDF

advertising