Eco & Quadra Sparkling Specification Sheet Instant chilled & sparkling filtered water The Billi Sparkling systems are the ultimate drinking water appliances which deliver boiling, chilled & sparkling filtered water instantly. They deliver the following benefits: Saturated sparkling system The CO2 injection system used in the Billi Sparkling range ensures the saturation of CO2 in the water is high which means it has a better life and, consequently, taste. Adjustable sparkling water Adjust the level of sparkling to suit your taste. With adjustable controls up to 5 bar of CO2 pressure, this offers the world’s best carbonation system. Adjustable chilled temperature A simple adjustable control knob allows the chilled water temperature to be raised or lowered for chilled and refreshing drinks. XL Levered on font in Chrome Safety first Billi’s SplashFree boiling water delivery electronically varies the water flow, slowing momentarily to eliminate splashing as the water first enters the cup. All Billi dispensers are supplied standard with a safety switch. Cupboard fitment options The Billi Sparkling range is supplied as two modules enabling multiple cupboard fitment options to maximise the use and efficiency of your cupboard space. XL Levered in Chrome Eco & Quadra Sparkling Specification Sheet Specifications and guide to standard model selection Product Description Initial cup Chilled & Number delivery and sparkling suggested no. of cups / hour persons Boiling cups / hour Total current draw (amps) 903000LCH Eco Sparkling 10 60 90 2 x 10 903060LCH Quadra Sparkling 460 60 120 180 2 x 10 903100LCH Quadra Sparkling 4100 100 120 250 1 x 10 1 x 15 C&S Boiling C&S Boiling C&S Boiling Unit Unit Height Width (mm) (mm) Unit Depth (mm) 385 340 385 340 385 340 325 360 325 460 325 460 240 180 240 180 240 180 Please note: The BCS Sparkling consists of two modules, the Chilled and Sparkling (C&S) module, and the Boiling module. All Models come in a range of dispenser options and finishes. The codes shown on this table are for XL Dispenser in Chrome only. You can view the options and Product Codes here: http://billi.com.au/wp-content/uploads/2016/06/Aqua-Genius-Selection-Guide_0516.pdf Electrical installation requirements The Billi Boiling, Chilled & Sparkling consists of two modules and both require their own standard AU 10 amp power outlet. Unit is supplied with a 1 metre flex cord and plug. Water supply A single 15mm (1/2”) stop-tap with a male thread should be installed in an easily accessible position. Water supply must be microbiologically safe to drink, with a minimum dynamic water pressure of 250kPa to a maximum of 1200kPa. CO2 Gas Cylinder The CO2 gas cylinder supplied must be secured in a suitable location. Each cylinder contains 600g of CO2 and should be installed in a well ventilated area. Each cylinder will provide between 200-350L of sparkling water depending on the unit settings. The MSDS is available on www.billi.com.au for a complete list of specifications and warnings. Replacement gas cylinders are available from Billi. Warranty All components of the Billi units are covered by a 24 month warranty. Filter cartridges are a consumable and are not covered by warranty, as water conditions and usage vary. All Billi units are covered by a 5 year warranty on the boiling water tanks Filtration Billi have partnered with globally recognised brand Pentair Everpure to create the most technologically advanced filtration for instant boiling and chilled filtered water systems. It removes sediment and chemicals, allows the flow of minerals through without scale build up and suppresses harmful bacteria in the water. Due to the unique Fibredyne™ technology, our filters have a longer life, higher flow rate and lower pressure drop, leaving you with healthy fresh water. All Billi cartridges are certified by NSF International. Filter changes are made simple by our swing-change system and replacement cartridges are available online at www.billi.com.au. Optional sub micron filters are available. Certifications Every Billi drinking water appliance is manufactured under a certified quality control system. Billi Sparkling models have been tested and comply with all required standards including: Watermark License Number 21525; Tested to; AS3498 and AS/NZS4020; ISO 9001; AS1428 Accessibility Design Requirements; Section J6 of the BCA; Certificate Number QEC 11627. Technical Advice Contact Billi Pty Ltd on 1800 812 321 Billi Pty Ltd 42 Lucknow Crescent, Thomastown Victoria, 3074 Australia Telephone + 613 9469 0400 Facsimile + 613 9469 0499 Website www.billi.com.au Designed and manufactured in Australia As Billi Pty Ltd has a policy of continual improvement, all details are subject to change without notice. All goods sold are subject to our standard terms and conditions. 1016 Preferred installation layout 1 cup = 170ml. Based on the initial number of cups of boiling water immediately available, drawn one cup every 10 seconds. Consideration may be needed for usage patterns and draw-off methods.