PERLAPAL® W
Reliable and safe cleaning
Application
Description
The reliable and safe Perlapal® W hot water and steam hose is especially
designed for cleaning purposes in the food, pharmaceutical and cosmetic
industry. It is suitable for the safe transport of hot water up to +95°C
(+203°F) and steam up to +164°C (+327°F) - for open-end discharge only.
› White, non-porous, smooth and homogeneous CIIR lining
› Reinforcements: synthetic fibres
› Blue, fabric patterned NBR-cover, resistant to ozone, weather, UV, fats, oils
and abrasion
› Working pressure up to 20 bar / 290 psi (water)
Marking
› Working pressure up to 6 bar / 87 psi for steam
White spiral with blue, wavy line on blue cover
› Temperature range from -30°C up to +95°C / -22°F up to +203°F (hot
water), up to max. +164°C / +327°F (steam – open systems only)
› 2 years warranty
Technical data
nominal width
inner-Ø
wall thickness
length
working ­pressure
min. burst pressure
min. bending radius
weight
zoll/inch
mm
mm
m
bar
bar
aprx. mm
aprx. g/m
psi
psi
1/2
13
5.0
40
20
290
60
870
80
400
5/8
16
5.5
40
20
290
60
870
100
500
3/4
19
6.0
40
20
290
60
870
115
600
1
25
7.0
40
20
290
60
870
150
800
1 1/4
32
7.0
40
20
290
60
870
195
1200
1 1/2
38
8.0
40
20
290
60
870
230
1500
2
50
8.0
40
20
290
60
870
300
1900
Pressure based on room temperature / High pressure and/or temperature lead to reduced component durability / Warranty refers to faulty material and manufacture provided that couplings have
been fitted by experts, that the recommended working conditions have been respected and that the hose has been used properly
ContiTech Industrial Fluid Solutions
Industry Hose
www.contitech.de
ContiTech Schlauch GmbH
Continentalstr. 3-5 | 34497 Korbach, Germany
The content of this publication is not legally binding and is provided as information
only. The trademarks displayed in this publication are the property of Continental AG
and/or its affiliates. Copyright © 2017 ContiTech AG. All rights reserved. For complete
information go to: www.contitech.de/discl-en
industrial.hoses@fluid.contitech.de
IFS IH 1040 W 11.2017. Printed with ContiTech offset printing blankets on bleached paper free of chlorine.
PERLAPAL® S
Reliable and safe cleaning
Application
Description
The reliable and safe Perlapal® S hot water and steam hose is especially
designed for cleaning purposes in the food, pharmaceutical and cosmetic
industry. It is suitable for the safe transport of hot water up to +95°C
(+203°F) and steam up to +164°C (+327°F) - for open-end discharge only.
› Black, non-porous, smooth and homogeneous CIIR lining
› Reinforcements: synthetic fibres
› Blue, fabric patterned NBR-cover, resistant to ozone, weather, UV, fats, oils
and abrasion
› Working pressure up to 20 bar / 290 psi (water)
Marking
› Working pressure up to 6 bar / 87 psi for steam
White spiral with blue, wavy line on blue cover
› Temperature range from -30°C up to +95°C / -22°F up to +203°F (hot
water), up to max. +164°C / +327°F (steam – open systems only)
› 2 years warranty
Technical data
nominal width
inner-Ø
wall thickness
length
working ­pressure
min. burst pressure
min. bending radius
weight
zoll/inch
mm
mm
m
bar
bar
aprx. mm
aprx. g/m
psi
psi
1/2
13
5.0
40
20
290
60
870
80
400
5/8
16
5.5
40
20
290
60
870
100
500
3/4
19
6.0
40
20
290
60
870
115
600
7/8
22
6.0
40
20
290
60
870
135
700
1
25
7.0
40
20
290
60
870
150
800
1 1/9
28
7.0
40
20
290
60
870
170
1000
1 1/4
32
7.0
40
20
290
60
870
195
1200
1 1/2
38
8.0
40
20
290
60
870
230
1500
2
50
8.0
40
20
290
60
870
300
1900
Pressure based on room temperature / High pressure and/or temperature lead to reduced component durability / Warranty refers to faulty material and manufacture provided that couplings have
been fitted by experts, that the recommended working conditions have been respected and that the hose has been used properly
ContiTech Industrial Fluid Solutions
Industry Hose
www.contitech.de
ContiTech Schlauch GmbH
Continentalstr. 3-5 | 34497 Korbach, Germany
The content of this publication is not legally binding and is provided as information
only. The trademarks displayed in this publication are the property of Continental AG
and/or its affiliates. Copyright © 2017 ContiTech AG. All rights reserved. For complete
information go to: www.contitech.de/discl-en
industrial.hoses@fluid.contitech.de
IFS IH 1040 S 11.2017. Printed with ContiTech offset printing blankets on bleached paper free of chlorine.
DAMPF TRIX® 5000
Highest quality for conveying saturated steam according to DIN EN ISO 6134 - 1A
Application
Description
The DAMPF TRIX® 5000 steam hose has been designed to meet the
highest requirements on hose material for the safe transport of steam and
hot water in the chemical and petrochemical industry, the construction
industry, landscaping, for the heating of tank wagons, as well as for various
other industrial applications. The construction with special textile fibres
allows a much higher continuous temperature resistance compared to
conventional textiles. Additionally, the high flexibility and its conductivity
make the hose a safe and high-class working material.
› Black, non-porous and smooth EPDM lining
› Reinforcements: high-strength, hydrolysis and temperature resistant
aramid
› Black, smooth EPDM-cover, resistant to ozone, weather, UV and abrasion
› Working pressure up to 6 bar / 87 psi
› Temperature range from -40°C up to +120°C / -40°F up to +248°F (hot
water), or +164°C / +327°F (steam)
› Electrically conductive, R < 106 Ω/hose line
› Meets all requirements as per DIN EN ISO 6134-1A
Marking
3 red coloured axial markings on black cover “Continental ContiTech
DAMPF TRIX® 5000 – DAMPF / STEAM – PN 6 BAR / 87 PSI – Ω Made in
Germany”
Technical data
nominal width
inner-Ø
wall thickness
length
working ­pressure
min. burst pressure
min. bending radius
weight
zoll/inch
mm
mm
m
bar
bar
aprx. mm
aprx. g/m
psi
psi
1/2
13
6.0
40
6
87
60
870
130
400
3/4
19
7.0
40
6
87
60
870
190
650
1
25
7.5
40
6
87
60
870
250
900
Attention: Superheated steam will reduce the durability considerably
ContiTech Industrial Fluid Solutions
Industry Hose
www.contitech.de
ContiTech Schlauch GmbH
Continentalstr. 3-5 | 34497 Korbach, Germany
The content of this publication is not legally binding and is provided as information
only. The trademarks displayed in this publication are the property of Continental AG
and/or its affiliates. Copyright © 2017 ContiTech AG. All rights reserved. For complete
information go to: www.contitech.de/discl-en
industrial.hoses@fluid.contitech.de
IFS IH 1045 11.2017. Printed with ContiTech offset printing blankets on bleached paper free of chlorine.
DAMPF TRIX® 6000
Highest quality for conveying steam according to EN ISO 6134 - 2A
Application
Description
The high-temperature resistant DAMPF TRIX® 6000 steam hose has been
designed to meet the most severe working conditions for conveying
saturated steam in the chemical and petrochemical industry, in refineries,
the construction industry, in shipyards and for various other industrial
applications. It is made of an extremely heat resistant EPDM lining and
cover assuring the transport of pure, saturated steam at +210°C (+410°F)
and 18 bar (261 psi), or even at +220°C (+428°F) and 23 bar (334 psi) for
short-time service.
› Black, non-porous and smooth EPDM lining
› Reinforcements: 2 steel wire braids, excellent resistance to corrosion
› Black, fabric patterned EPDM-cover, resistant to ozone, weather, UV and
abrasion
› Working pressure up to 18 bar / 261 psi
› Burst pressure > 180 bar / 2.611 psi, safety factor 10:1
› Temperature range for saturated steam up to max. +210°C / +410°F,
short term +220°C / +428°F at 23 bar / 333 psi (saturated steam)
› Improved resistance against pop corning
Marking
› Electrically conductive, R < 106 Ω/hose line
3 red coloured axial markings on black cover “Continental ContiTech
DAMPF TRIX® 6000 – DAMPF / STEAM – PN 18 BAR / 261 PSI – Ω Made
in Germany”
› Meets all requirements as per EN ISO 6134-2A
Technical data
nominal width
inner-Ø
wall thickness
length
working ­pressure
min. burst pressure
min. bending radius
weight
zoll/inch
mm
mm
m
bar
bar
aprx. mm
aprx. g/m
3/8
1/2
9.5
13
psi
psi
6.0
40
18
261
180
2611
100
400
6.0
40
18
261
180
2611
130
530
3/4
19
7.0
40
18
261
180
2611
190
900
1
25
7.5
40
18
261
180
2611
250
1200
1 1/4
32
8.0
40
18
261
180
2611
320
1550
1 1/2
38
8.0
40
18
261
180
2611
380
1800
2
50
9.0
40
18
261
180
2611
500
2600
Attention: Superheated steam will reduce the durability considerably
ContiTech Industrial Fluid Solutions
Industry Hose
www.contitech.de
ContiTech Schlauch GmbH
Continentalstr. 3-5 | 34497 Korbach, Germany
The content of this publication is not legally binding and is provided as information
only. The trademarks displayed in this publication are the property of Continental AG
and/or its affiliates. Copyright © 2017 ContiTech AG. All rights reserved. For complete
information go to: www.contitech.de/discl-en
industrial.hoses@fluid.contitech.de
IFS IH 1046 11.2017. Printed with ContiTech offset printing blankets on bleached paper free of chlorine.
DAMPF TRIX® 6000 OIL
Highest quality for conveying steam according to EN ISO 6134 - 2B
Application
Description
The new, oil resistant DAMPF TRIX® 6000 OIL is an innovative hightech
version in ContiTech´s extremely successful steam hose family. Its
outstanding heat resistant inner liner made of high quality EPDM allows the
conveyance of pure, saturated steam at +210°C (+410°F) and 18 bar (261
psi), or even at +220°C (+428°F) and 23 bar (334 psi) for short-time service.
Thanks to its newly developed, oil resistant cover the hose is especially
suitable for conveying steam in the chemical and petrochemical industry,
in refineries, the building industry, in shipyards and for various other
industrial applications under the most grueling conditions – in all places,
where existing steam hoses fail at an early stage due to oil contamination
from outside. With this single high flexible hose we have managed to
solve the conflict between oil resistance on the one hand and high steam
temperature resistance on the other hand. DAMPF TRIX® 6000 OIL meets
the requirements of DIN EN ISO 6134:2006-2 to the full extent.
› Black, non-porous and smooth EPDM lining
› Reinforcements: 2 steel wire braids, excellent resistance to corrosion
› Black, fabric patterned special cover, resistant to ozone, weather, UV, oil
and abrasion
› Working pressure up to 18 bar / 261 psi
› Temperature range for saturated steam up to max. +210°C / +410°F,
short term +220°C / +428°F at 23 bar / 333 psi (saturated steam)
› Optimized resistance against pop corning
› Electrically conductive, R < 106 Ω/hose line
› Meets all requirements as per EN ISO 6134-2B
Marking
1 red and 2 white coloured axial markings on black cover “Continental
ContiTech DAMPF TRIX® 6000 OIL – DAMPF / STEAM – PN 18 BAR / 261
PSI – Ω oil can Made in Germany”
Technical data
nominal width
inner-Ø
wall thickness
length
working ­pressure
min. burst pressure
min. bending radius
weight
zoll/inch
mm
mm
m
bar
bar
aprx. mm
aprx. g/m
psi
psi
1/2
13
6.0
40
18
261
180
2611
130
530
3/4
19
7.0
40
18
261
180
2611
190
900
1
25
7.5
40
18
261
180
2611
250
1200
1 1/4
32
8.0
40
18
261
180
2611
320
1550
1 1/2
38
8.0
40
18
261
180
2611
380
1800
2
50
9.0
40
18
261
180
2611
500
2600
Attention: Superheated steam will reduce the durability considerably
ContiTech Industrial Fluid Solutions
Industry Hose
www.contitech.de
ContiTech Schlauch GmbH
Continentalstr. 3-5 | 34497 Korbach, Germany
The content of this publication is not legally binding and is provided as information
only. The trademarks displayed in this publication are the property of Continental AG
and/or its affiliates. Copyright © 2017 ContiTech AG. All rights reserved. For complete
information go to: www.contitech.de/discl-en
industrial.hoses@fluid.contitech.de
IFS IH 1047 11.2017. Printed with ContiTech offset printing blankets on bleached paper free of chlorine.
01 0203
Water-saving gun DINGA
Saving water and protecting the environment
Application
Description
The DINGA water-saving gun of ContiTech Schlauch GmbH is
extremely robust and has a long service life due to its high-quality
brass/stainless steel design. Additionally, it is protected against shock,
heat and cold and has a rubber protection against any damage
from caustic solutions and acids. The use of this gun helps to save
considerable water and energy costs, which, along with its chemical-free
cleaning capability, contributes to the protection of the environment. The
flow can be adjusted from a fine spray to a concentrated jet. Thus, the gun
is suitable for a careful and efficient cleaning for nearly any professional
application.
› Working pressure up to 25 bar / 363 psi
› Water temperature max. +50°C / +122°F (Water-saving gun), max. +95°C
/ +203°F (Hot water-saving gun)
› Flow rate of water 25 l/minute at 5 bar / 72 psi
› Cleans carefully and ecologically harmless
› Robust and with a long service life
› Resistant to caustic solutions and acids
› Shock-, heat- and cold-proof
› Adjustable water jet
› Internal thread 1/2”
› Available for hose connections 1/2’’, 3/4’’ and 1’’
01 Water-saving gun
02 Hot water-saving gun I
03 Hot water-saving gun II
› Spare parts available on request
ContiTech Industrial Fluid Solutions
Industry Hose
www.contitech.de
ContiTech Schlauch GmbH
Continentalstr. 3-5 | 34497 Korbach, Germany
The content of this publication is not legally binding and is provided as information
only. The trademarks displayed in this publication are the property of Continental AG
and/or its affiliates. Copyright © 2017 ContiTech AG. All rights reserved. For complete
information go to: www.contitech.de/discl-en
industrial.hoses@fluid.contitech.de
IFS IH 1044 11.2017. Printed with ContiTech offset printing blankets on bleached paper free of chlorine.