Spec Sheet - Universal Remote Control

Lighting Control System
Control Your World
Today’s homes have a wide variety of lights, dimmers
Set the Scene
and switches, indoors and out. Lighting control pro-
Vivido allows you to set the scene and enjoy a
vides convenience, cost savings and an extra meas-
personal library of preset combinations of lighting
ure of security. The Vivido by URC lighting system
levels perfectly suited to your home and lifestyle.
delivers the most vivid wireless RF lighting available.
For example, an Entertaining scene dims the interior
And, if you’re looking for brilliant style and design, no
lights and turns on color LED lighting in the pool
other lighting control system outshines it.
area to bring your yard to life. For added convenience, common events can be scheduled for specific
Two-way Control
times – such as illuminating a pathway to the kitchen
Vivido lighting products deliver two-way feedback
using a Good Night scene.
when installed as part of a URC Total Control® and
MX HomeProTM system. Control lights and scenes –
Access from Anywhere
at home or while away – using an array of premium
Add a whole new level of security to your life. Enjoy
touchscreens, handheld remotes, keypads, mobile
two-way control of your lighting from your smart-
apps and even voice control. Vivido can also be
phone or tablet using the Total Control 2.0 mobile app.
installed as part of a standalone lighting system.
Adjust lights from the office or just before you arrive
home. And, make your house look lived in while you
are away.
Dimmers
Master and Accessory
Dimmers
Single-pole, 3-way, 4-way
Using dimmers saves money by reducing energy consumption and dramatically
extending bulb life. In circuits where a light is controlled by more than one dimmer, one Vivido Master Dimmer and the appropriate number of Accessory Dimmers
(maximum five) must be installed. No traveler wire necessary.
120V/AC, 60Hz
COMMON KEY FEATURES
300W LED, CFL
• Adjustable low-level trim setting helps prevent flickering
600W magnetic low-voltage,
electronic low-voltage,
incandescent,
fluorescent, halogen
• Adjustable high-level trim setting for additional energy savings
• Programmable rapid start feature ensures lamp start-up even at low dim levels
• Can be associated with up to five other devices
• Air-gap switch disconnects power from load forcing an OFF condition
• Electro-mechanical push pad for ON/OFF operation with separate DIM/BRIGHT bar
• Patented indicator system alerts if dimmer is not set up on the network
• Seven step blue LED display alongside push pad indicates selected light level and
reduces brightness when OFF (night light feature)
• Programmable rapid and delayed fading up to 4 minutes (default is 10 seconds)
• Adjustable ramp rate (up to 4 minutes) and All-ON/All-OFF inclusion
• Panic mode for increased security and integration with security systems
• Press and hold push pad to bring light to full brightness without
affecting presets
• Compatible with any Decora® wall plate (not included)
• Available in White, Black and Light Almond
ACCESSORY DIMMER FEATURES
• 600W and 1000W models
• All-load and no-neutral models (1000W no neutral only)
• 600W models do not require de-rating in multi-gang installations.
1000W model derates to 800W for 2+ gang installations
MASTER ACCESSORY FEATURES
• Adds wireless 3-way control when used with master dimmer, eliminating the
need for traditional 3-way wiring or dedicated traveler wires
• Compatible with Vivido Master Dimmers only
SPECIFICATIONS
Performance
Rating: 120V/AC, 60Hz
Derating is required in some multi-gang installations; derating never required for 600 Watt dimmer
Performance
A URC Z-Wave enabled device must be within 30 feet of another Z-Wave enabled device to participate in a Z-Wave
Consideration
wireless mesh network. Any one dimmer or switch can be associated with up to 5 devices (dimmers, switches,
receptacles, or plug-in modules)
Terminations
All-load dimmers have four 6” pre-stripped wire leads for line, load, ground and neutral; no-neutral dimmers have three
Dimmers designated “all-load” require connection to a neutral wire.
Dimming LED, CFL, ELV and Fluorescent Dimming Ballasts requires an all-load dimmer.
2
Battery Operated
Switch/Dimmer
Battery operated, CR2025 batteries
The Vivido Battery Operated Switch/Dimmer controls RF receptacles, switches or
dimmers to provide remote ON/OFF/DIM/BRIGHT control. This switch/dimmer
provides other programmable functions (association, etc.) when used with Vivido or
other Z-Wave® compliant products. It is intended to manually control other Z-Wave
devices through association. Utilizes two CR2025 batteries and mounts flush to the
wall. No new wiring is required—so it’s ideal for retrofits.
KEY FEATURES
• Blue LED displays as follows during sent command:
ON — comes on for 2 seconds
OFF — blinks once
No Response — blinks six times
• Can be associated with up to five other devices
• Electro-mechanical push pad for ON/OFF operation with separate DIM/BRIGHT bar
• Can be used in existing or new multi-gang installations with inner wall plate
• Patented indicator system alerts if dimmer is not set up on the network
• Compatible with Vivido devices for wireless 3-way control, eliminating the need for
traditional 3-way wiring or for a dedicated traveler wire
• Sleep Mode reduces power consumption and extends battery life (LED is OFF)
• Single button programming
• Mounts to any flat surface
• All-ON/All-OFF inclusion
• Includes single-gang wall plate mounting hardware (two (2) drywall screws and
anchors, two (2) two-sided tape strips) and two (2) CR2025 batteries
• Wall plate included in this Vivido model only
• Available in White, Black and Light Almond
Stylish Vivido Dimmers and Switches complement any décor.
3
Plug-In Modules
Lamp Dimming and
Appliance Switching
Plug-In Modules
Lamp dimming module
up to 300W
incandescent lighting
Appliance switching module
up to 600W appliances
Simply plug the lamp cord into the receptacle on the Vivido Lamp Dimmer and plug
the Lamp Dimmer into the wall. No screwdriver needed. The Vivido Plug-in Lamp
Dimming Module provides local and remote ON/OFF/DIM/BRIGHT control of table
and floor lamps where desired. Furthermore, the module provides other programmable functions (scenes, events, association, etc.) when installed as part of a Total
Control system. Plug-in modules can be manually controlled and remotely controlled
by commands sent from URC and other Z-Wave compatible controllers or programs.
The Vivido Plug-in Appliance Switching Module plugs directly into the wall.
Any device up to 600 Watts, including appliances, then plugs into the
Switching Module.
COMMON KEY FEATURES
• Quiet relay switching
• Amber LED indicates ON/OFF load status
• Single button programming
• Can be included in Scenes
• Ability to be controlled remotely by other Vivido devices through association
• Can be associated with up to five other devices
• Panic mode for increased security & integration with security systems
• All-On/All-Off inclusion
• Patented indicator system alerts if module is not set up on the network
• Configurable “Power On Status”
• Power failure memory
• Available in White only
PLUG-IN LAMP DIMMING MODULE FEATURES
• Provides polarized 300W-120VAC NEMA
• Electro-mechanical push button located on side of device for inclusion and
ON/OFF/DIM/BRIGHT operation
• Adjustable ramp rate (up to 4 minutes)
PLUG-IN APPLIANCE SWITCHING MODULE FEATURES
• 120V/AC NEMA 5-15R grounding receptacle for use with a variety of appliances
• Electro-mechanical push button for inclusion and ON/OFF operation
4
Switches
Master and Accessory
Switches
Single-pole, 3-way, 4-way
15A, 120V/AC, 60Hz
LED, CFL, incandescent,
magnetic low-voltage,
electronic low-voltage,
fluorescent, halogen
Switches are ideal for controlling wall outlets and devices that cannot be dimmed
(e.g., outdoor lights, radios) and standard wall outlets. Wall outlets should never be
controlled by a dimmer due to the risk that someone might plug in an
inappropriate device (anything with an electric motor such as a vacuum cleaner or
fan) which can cause damage or potentially create safety hazards.
In circuits where a light is controlled by more than one switch, one Vivido Master
Switch and the appropriate number of Accessory Switches (maximum five) must be
installed. No traveler wire necessary.
COMMON KEY FEATURES
• Can be associated with up to 5 other devices
• Electro-mechanical push button for ON/OFF operation
• Patented indicator system alerts if switch is not set upon the network
• Blue LED illuminates to indicate ON/OFF status
• Single button programming
• Programmable delayed OFF mode up to 4 minutes (default is 10 seconds)
• Panic mode for increased security & integration with security systems
• All-ON/All-OFF inclusion
• Configurable “power up state”
• Compatible with any Decora® wall plate (not included)
• Available in White, Black and Light Almond
ACCESSORY SWITCH FEATURES
• Adds wireless control eliminating the need for traditional three-way wiring
(up to five locations)
• Compatible with Vivido Master Switches only
SPECIFICATIONS
Performance
Maximum Amperage: 15A (applies to Master Switch only)
Rating: 120V/AC, 60Hz
Performance
A URC Z-Wave enabled device must be within 30 feet of another Z-Wave enabled device to participate in a Z-Wave
Consideration
wireless mesh network. Any one dimmer or switch can be associated with up to 5 devices (dimmers, switches, receptacles,
or plug-in modules)
Terminations
All-load switches have four 6” pre-stripped wire leads for line, load, ground and neutral; no-neutral switches have three
Switches designated “all-load” require connection to a neutral wire.
Controlling LED, CFL, ELV and Fluorescent Dimming Ballasts requires an all-load switch.
5
RF Receptacle
RF Duplex Receptacle
The Vivido split receptacle replaces regular receptacles to provide local and remote
RF ON/OFF control of a single outlet. Moreover, the receptacle provides other
programmable functions (scenes, events, association, etc.) when used with a URC or
15A, 1/2 HP
other Z-Wave® compliant controllers. The receptacle can be manually and remotely
120V/AC, 60 Hz
controlled by commands sent from an URC controller or other Z-Wave compatible
ballast, incandescent,
inductive tungsten
controllers or programs. A Vivido RF Duplex Receptacle utilizes existing 120V/AC
60Hz standard house wiring and fits into a standard wall box. No new wiring needed.
KEY FEATURES
• Provides control of one outlet leaving the other one for normal use
• Complies with 2011 NEC® section 406.12 specification that states all receptacles
installed in dwelling units must be tamper resistant (dwelling units are defined in
NEC® Article 210.52)
• UL listed safety shutter system prevents insertion of foreign objects into receptacle
• Ability to be controlled remotely by other Z-Wave devices through association
• Patented built-in wire stripper for #14 and #12 wire to speed installation
• Electro-mechanical push button located at center of device for inclusion and
ON/OFF operation
• Blue LED at center illuminates to indicate ON/OFF status
• Panic mode for increased security and integration with security systems
• Single button programming
• All-ON/All-OFF inclusion
• Patented indicator system alerts if receptacle is not set up on the network
• Configurable “power up state”
• Available in White, Black and Light Almond
SPECIFICATIONS
Performance
Maximum amperage for receptacle: 15A
Rating: 120V/AC, 60Hz
Horsepower rating: 1/2 HP (9.8A)
Performance
A URC Z-Wave enabled device must be within 30 feet of another Z-Wave enabled device to participate in a Z-Wave
Consideration
wireless mesh network. Any one dimmer or switch can be associated with up to 5 devices (dimmers, switches, receptacles,
or plug-in modules)
Terminations
Receptacle has three 6” pre-stripped wire leads for line, ground and neutral
6
Keypad
Wall Mount
Five-scene Keypad
120V/AC, 60Hz
The Vivido Wall Mount Five-scene Keypad mounts in a standard single-gang electrical box and is powered by normal household line voltage (120V/AC 60Hz). It activates
up to five (5) preset scenes by manually pushing one of the five buttons on the keypad.
Scenes are a group of devices set to customized levels or states.
The keypad has five buttons for turning individual scenes both ON and OFF.
A blue LED on each button provides scene status notification and LEDs also dim
when a scene is deactivated. The button located on the side of the device transmits
an All-OFF command to lighting devices associated with scene controller.
KEY FEATURES
• All OFF button provides easy access for turning off all devices associated with
scene keypad
• Fits standard wall box and uess existing 120V/AC, 60Hz (neutral wire required)
• Activates scenes associated with Vivido devices and other Z-Wave® compliant
devices
• Provides individual scene DIM/BRIGHT function by pressing and holding any
active (ON) scene’s button
• Stores up to 5 scenes for activation (ON/OFF)
• Blue LED on each button for scene status notification
• Blue LEDs provide night light feature by dimming when scene is deactivated
• Single button programming
• Transfer function on primary controllers allows user to easily copy scene informa-
tion from controller to each button on scene keypad
• Patented indicator system alerts if scene keypad is not set up on the network
• Compatible with any Decora® wall plate (not included)
• Available in White, Black and Light Almond
SPECIFICATIONS
Performance
Rating: 120V/AC, 60Hz
Performance
A URC Z-Wave enabled device must be within 30 feet of another Z-Wave enabled device to participate in a Z-Wave
Consideration
Terminations
wireless mesh network.
Keypad has three 6” pre-stripped wire leads for line, ground and neutral
7
Product Name
Master Neutral Dimmer - all load
Accessory Neutral Dimmer
Master Neutral Switch - all load
Accessory Neutral Switch
Master Dimmer - no neutral
Accessory Dimmer - no neutral
Requires Neutral
Color
Yes
White
VL-9540-MND
Black
VL-9540-MND-BL
Light Almond
VL-9540-MND-LA
White
VL-9542-AND-WH
Black
VL-9542-AND-BL
Light Almond
VL-9542-AND-LA
White
VL-9501-MNS-WH
Black
VL-9501-MNS-BL
Light Almond
VL-9501-MNS-LA
White
VL-9517-ANS-WH
Black
VL-9517-ANS-BL
Light Almond
VL-9517-ANS-LA
White
VL-9534-MD-WH
Black
VL-9534-MD-BL
Light Almond
VL-9534-MD-LA
White
VL-9542-AD-WH
Black
VL-9542-AD-BL
Light Almond
VL-9542-AD-LA
Yes
Yes
Yes
No
No
Part Number
Lamp Dimming Plug-in Module
NA
White
VL-LDM
Appliance Switching Plug-in Module
NA
White
VL-APM
Battery Operated Switch/Dimmer
NA
White
VL-9500-BOS-WH
Black
VL-9500-BOS-BL
Light Almond
VL-9500-BOS-LA
White
VL-9536-DW-WH
Black
VL-9536-DW-BL
Light Almond
VL-9536-DW-LA
1000 Watt Dimmer - no neutral
RF Duplex Receptacle
Wall Mount Five-Scene Keypad
No
No
Yes
White
VL-9505-RFR-WH
Black
VL-9505-RFR-BL
Light Almond
VL-9505-RFR-LA
White
VL-RFWC5D-KP-WH
Black
VL-RFWC5D-KP-BL
Light Almond
VL-RFWC5D-KP-LA
All Vivido products come with a Two-Year Limited Warranty from date of installation.
Dimmers and Switches designated “all-load” require connection to a neutral wire.
Controlling LED, CFL, ELV and Fluorescent Dimming Ballasts requires an all-load dimmer or switch.
totalcontrol@universalremote.com
UniversalRemote.com
©2017 Universal Remote Control, Inc. Specifications subject to change without notice. URC® and Total Control®
are trademarks of Universal Remote Control, Inc. All other trademarks are property of their respective owners.