POWER & YOUR PC
The power coming into a computer is the most critical component, and it
may be one of the most overlooked. It is just taken for granted that it
will always be there and working properly. A top of the line processor
and ultra powerful video card do nothing if a system does not receive the
ample, stable power it demands. Having quality components providing
and regulating the power supplied to a computer is critical, and this brief
overview looks at a few areas worth consideration.
Power Supplies
Computer power supplies take the high (110V or 220V) AC voltages
from an electrical outlet and convert it to the various lower DC voltages
required for a system to operate. The typical voltages required inside a
computer are 3.3V, 5V, and 12V, where the 3.3V and 5V lines are
generally used to power circuitry, and the 12V line provides power to
run items such as hard drives, optical drives, and cooling fans.
Power supplies are sold in terms of their total power
output, in terms of wattage. Choosing the correct power
supply means not only finding one that will provide
enough power for all of the components connected to
the system, but also one that is the correct size
physically, has enough connections for typical drives and fans, and if
necessary, that also has special connections for things such as Serial
ATA drives and modern video cards.
Choosing a power supply with enough power shouldn’t be much of a
problem, as having more power than you need is never a bad thing. Just
because a power supply is rated for 400W, or perhaps 600W, does not
imply that it is drawing that at any given time. It just indicates the total
power available to the various lines inside the computer. For those
interested in getting a good idea of their minimum power requirements,
this Power Wattage Calculator is a convenient reference. In addition to
checking out the total wattage of a power supply, looking for strong
amperage ratings on the 3.3V, 5V, and 12V lines is also recommended,
as power supplies with identical total power ratings may distribute the
power to the various lines in different quantities.
Power supplies come in a few different physical sizes, but the
most common are designed to fit the standard ATX and micro
ATX (mATX) form factor cases. A typical ATX power supply,
such as this Echo-Star 680W unit, measures 3.25” x 6” x 5.5”
and features two cooling fans to not only cool the power supply,
but to also help draw hot air out of the computer. A typical
mATX power supply, such as this A-Power 320W unit, measures 2.5” x
5” x 4” and due to the smaller size features just one cooling fan. mATX
cases are generally much smaller than ATX cases, and therefore have
smaller power supplies, with generally lower power ratings, and fewer
connectors.
The connectors on a power supply also deserve consideration. Most
power supplies come with what looks to be an electric octopus of wires
hanging off the back surface, and you need to make sure that somewhere
in that tangled bundle are all of the connectors you need. The power
supply should at least have as many connections as the number of drives,
cooling fans, and other items found in the case. Up until recently power
supplies had a fixed number of connections, and if you needed more,
you needed to use splitters to distribute the power to all the components.
Modular power supplies, such as theUltra X-Connect 500W unit, are
now available that eliminate that “electric octopus” all together, and
allow the end user to connect just the cables they need. The flexibility of
a modular power supply design not only lets you customize the
connections to your needs, it also makes for a simple and tidy
installation, since there are no extra wires dangling inside the case.
The selection of a high quality power supply may cost more money up
front, but down the road it could wind up saving money. Many
manufacturers now offer power supplies that consume less energy
thanks to high quality internal components, advanced designs, and active
power factor correction. These units are now able to provide the same
power to the components in a computer, but due to increased efficiency,
draw less power from the electrical outlet.
Surge Protectors
Surge protectors are intended to protect
your electronics from a brief increase in
voltage caused by such things as lightning, rolling blackouts, and heavy
drawing electrical equipment. A surge protector reacts to divert the extra
electricity to ground, and thus protects your expensive computer
equipment from damage. A surge is any increase lasting three
nanoseconds or longer, so a surge protector needs to react quickly. Most
surge protectors also include a fuse (or breaker), and if the surge is too
great to be handled without interruption, the fuse will blow. Although
the fuse may be destroyed, it’s a small loss compared to what it may
have saved.
Surge protectors come in all shapes and styles. Some basic models can
even be found at your local dollar store, but offer no more than a few
outlets connected to a breaker. No serious protection is obtained, but
many people just want more outlets, not protection.
More serious surge protectors will probably cost a bit more than a dollar,
but will offer some peace of mind that your equipment is actually being
protected. In addition to protecting from electrical surges, some devices
include extra features such as conditioning to filter out line noise and
ports to protect other lines such as cable television, telephone, and
networking.
The Fellowes Smart Surge Power Strip protects up to 10 devices from
surges, as well as offering line conditioning and ports to protect your
phone line. A highly appealing feature of such a surge protector is that 4
of the ports are designed to accept bulky AC adaptors. For those with
surge protectors that weren’t designed to be this user friendly, there is
still hope in the form of Power Strip Saver Cables. Basically just 7 inch
long extension cords, these items can come in very handy when trying to
connect multiple AC adaptors to a more traditional surge protector.
Uninterruptible Power Supplies
Many people familiar with Uninterruptible power supplies (UPS) know
that they can keep a computer up and running during a total power
failure, but don’t know what else they do. Most UPSes will also provide
protection from voltage surges and sags
(when the voltage drops below normal), as
well as protection from the possibility of a
shift in the electricity’s frequency.
UPSes come in two varieties, standby and continuous, although standby
versions are far more common and less expensive. A standby UPS
allows the devices connected to it to run from the normal electrical
connection until a loss of power is detected, at which point it quickly (in
a matter of milliseconds) switches to the battery backup of the UPS. A
continuous UPS always has the devices connected to it running off of
battery power, while the batteries are recharged by the normal electrical
connection.
UPSes are sold in terms of their capacity, in terms of VA (voltage
multiplied by amperage). This implies that devices connected to the UPS
can draw a maximum of so much amperage at a specific voltage. A run
time after a power failure is also generally specified for a UPS based on
a full load being placed on the device.
Selecting a UPS needs to be based on the intended use… A smaller unit,
such as the Fenton 600VA, would be adequate for powering a typical
desktop computer, monitor, and smaller peripherals such as a printer and
lighting for what they rate as 15-23 minutes at full load. If multiple
systems need to be powered, or perhaps there are plans for future
expansion that will add to the power demands, a larger unit such as
the Tripp Lite 1500VA may be more appropriate. The first two units are
intended to be set in close proximity to the devices to be powered,
perhaps on the floor behind a desk, but if you are seeking to add a UPS
to a server, there are also rackmount solutions such as the Opti-UPS
1100VA.
No matter the application, sizing a UPS may seem overwhelming. One
manufacturer, APC, has created a handyUPS Selector Application which
will take some of the guess work out of choosing the right UPS for any
particular application.
Source: http://www.geeks.com/techtips/2004/techtips-09dec04.htm
Download PDF

advertising