biological microscope ws–il model iroscope

BIOLOGICAL MICROSCOPE
WS–IL MODEL
IROSCOPE®
Authorized Distributor
MADE IN MEXICO - FROM MEXICO
For customer service center:
Camino Real a San Lorenzo no. 263
Col. Barrio de San Miguel, 09360 México, D.F.
Tel. 1087 1087 - Fax 1087 1092
OPERATING INSTRUCTION
NOTES
The microscope
This precision instrument for incident illumination, has been designed to
require a minimum of optical and mechanical elements.
Maintenance
Its excellent design assures years of high quality. We recommend you to
read this manual carefully before beginning to use the instrument.
Warning
Please disconnect plug from main socket before removing parts, like lamp
replacement.
Warning
The power cord provided with the equipment has a grounded plug. Always
use the power cord with a properly grounded wall outlet.
Do no expose the instrument to high temperatures or humidity; avoid using
the instrument in extremely dusty locations.


Operating temperature 5ºC to 35ºC
Operating humidity: 20% to 80% @ 25 c
Caution: Never immerse the instrument in water or solvent.
Caution: Do not put any foreign objects in the frame or into any moving
mechanical parts.
NOTES
NOTES
TABLE OF CONTENTS
A.
Getting started
1
B.
Components
1
C.
Setup instructions
2
D.
Changing the light bulb and fuse
2
E.
Preventative maintenance
2
C. SETUP INSTRUCTIONS.
A. GETTING START
This reference manual is written base on whole series, it covers some
capable optional attachments and functions, and you may read the similar
operation what you need.
1.
Remove the microscope from their packing materials and retain the
packaging in the event you need to transport the product.
2.
You are ready to connect the power cord to a suitable power supply.
B. COMPONENTS
D. CHANGING THE LIGHT BULB AND FUSE
A. Switch off the power supply and pull out the plug of electrical cord.
B.
Lamp. Loose the two screws in the left side of the lamp. Put out base
of the lamp. Take out the old lamp; assemble the new halogen lamp.
Reinstalled the base. Tighten the screws.
C. Fuse. To exchange the fuse, follow the same steps: A
E. PREVENTATIVE MAINTENANCE
Fig. 1
1. Monocular tube, 2. Head with screw, 3. Body, 4. Incident halogen lamp 6V20Watts (220 volts) On/Off with two screws, 5. Nosepiece, 6. Objectives (5x and
10x), 7. Mechanical stage with two specimen holder X-Y movements, 8. Coarse
focusing knob, 9. Fine focusing knob, 10. Light control Off/On, 11. Power cord with
fuse 3A, always fit BS1362 replacement cartridge.
1
1.
Cleaning frame and stage.
Disconnect the plug from main socket before cleaning. Clean the
frame and stage with a soft cloth moistened with a mild detergent
solution. Be sure the instrument is dry before using.
2.
Cleaning optical parts
Microscope optical parts are coated.
They should not be wiped while dry as dirt or dust may scratch the
coating. It is best to remove parts from the frame prior to cleaning.
Always blow loose dust away first.
Use cotton swabs or lens tissue moistened with a lens cleaner or a
small amount of alcohol, and then wipe the surface clean with a good
quality lens tissue. Solvents such as xylem should not be used as a
cleaner.
Do not disassemble lenses.
2
Download PDF

advertising