ENGLISH
OWNER’S MANUAL
FRENCH DOOR
REFRIGERATOR
Please read this owner's manual thoroughly before
operating and keep it handy for reference at all times.
LFXS30766*
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
TABLE OF CONTENTS
3
4
PRODUCT FEATURES
IMPORTANT SAFETY
INSTRUCTIONS
7
COMPONENTS
7
Refrigerator Exterior
8
Refrigerator Interior
26HOW TO USE
26
Before Use
27
Control Panel
27
- Control Panel Features
30
Smart Grid
34
In-Door Ice Bin
34
- Detaching the In-Door Ice Bin
34
- Assembling the In-Door Ice Bin
35
Automatic Icemaker
35
- Turning the Automatic Icemaker On or Off
36
-W
hen You Should Turn the Icemaker Off
- Normal Sounds You May Hear
9
INSTALLATION
36
9
Installation Overview
36
- Preparing for Vacation
10
Specifications
37
Ice and Water Dispenser
11
Unpacking Your Refrigerator
37
- Dispenser
11
Choosing the Proper Location
37
- Using the Dispenser
11
- Flooring
37
- Locking the Dispenser
12
- Ambient Temperature
37
- Cleaning the Dispenser Stand
12
- Measuring the Clearances
38
Storing Food
12
Removing/Assembling the Refrigerator
Door Handles
38
- Food Preservation Location
39
- Food Storage Tips
13
Removing/Assembling the Freezer
Drawer Handle
39
- Storing Frozen Food
40
Glide‘N’Access™
13
Removing/Assembling the Doors and
Drawers
41
Detaching and Assembling the Storage Bins
14
- Removing the Left Refrigerator Door
42
Door-In-Door
15
- Removing the Right Refrigerator Door
44
Adjusting the Refrigerator Shelves
16
- Assembling the Right Refrigerator Door
17
- Assembling the Left Refrigerator Door
18
- Removing the Freezer Drawers
20
- Assembling the Freezer Drawers
21
Connecting the Water Line
21
- Before You Begin
21
- Water Pressure
45MAINTENANCE
45
Cleaning
46
Replacing the Fresh Air Filter
46
Replacing the Water Filter
21 - What You Will Need
51SMART DIAGNOSIS™
22
- Water Line Installation Instructions
51
24
Turning On the Power
25
Leveling and Door Alignment
25
- Leveling
25
- Door Alignment
Using Smart Diagnosis™
52TROUBLESHOOTING
62WARRANTY
PRODUCT FEATURES
* Depending on the model, some of the following functions may not be available.
FILTERED WATER AND ICE DISPENSER
The water dispenser dispenses fresh, chilled water.
The ice dispenser dispenses cubed and crushed ice.
Door Alarm
The Door Alarm function is designed to prevent refrigerator malfunctioning
that could occur if a refrigerator door or freezer drawer remains open. If a
refrigerator door or freezer drawer is left open for more than 60 seconds, a
warning alarm sounds at 30 second intervals.
Humidity Controlled crisper
The Humidity Controlled Crisper is designed to help keep your fruits and
vegetables fresh and crisp. You can control the amount of humidity in the
crisper by adjusting the setting between Low and High.
GLIDE‘N’SERVE
Glide‘N’Serve provides storage space with a variable temperature control
that keeps the compartment colder than the refrigerator. It is a convenient
place to store sandwiches or meat to be cooked.
Auto Closing Hinge
The refrigerator doors and freezer drawers close automatically with a slight
push. (The door only closes automatically when it is open at an angle less
than 30°.)
Ice Plus
Ice production can be increased by approximately 20 percent when the
freezer section is maintained at the coldest temperature for a 24-hour
period.
ENGLISH
PRODUCT FEATURES
3
4
IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
This guide contains many important safety messages. Always read and obey all safety messages.
This is the safety alert symbol. It alerts you to safety messages that inform you of
hazards that can kill or hurt you or others, or cause damage to the product.
All safety messages will be preceded by the safety alert symbol and the hazard
signal word WARNING or CAUTION. These words mean:
WARNING
CAUTION
You can be killed or seriously injured if you do not follow instructions.
Indicates an imminently hazardous situation which, if not avoided, may result
in minor or moderate injury, or product damage.
WARNING
To reduce the risk of fire, electric shock, or personal injury when using your product, basic safety
precautions should be followed, including the following:
Power
yy NEVER unplug your refrigerator by pulling on the power cord. Always grip the plug firmly and pull it
straight out from the outlet.
yy If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard. Do not use a cord that shows cracks or abrasion
damage along its length or at either the plug or connector end.
yy Do not use an uncertified power outlet.
yy Unplug the power plug immediately in the event of a blackout or thunderstorm.
yy Plug in the power plug with the power cord facing downward.
Installation
yy Contact an authorized service center before you install or relocate the refrigerator.
yy When moving your refrigerator away from the wall, be careful not to roll over or damage the power
cord.
yy Prior to use, ensure that you are connecting this product to a dedicated, grounded electrical outlet
rated for use with this product (115V, 60Hz, AC only). It is the user’s responsibility to replace a
standard 2-prong wall outlet with a standard 3-prong wall outlet.
yy Do not install the refrigerator where there may be a danger of the unit falling.
Use
yy DO NOT allow children to climb, stand, or hang on the refrigerator doors or on the shelves in the
refrigerator. They could damage the refrigerator and seriously injure themselves.
yy Do not hang on to or place heavy objects on the refrigerator’s dispenser.
yy Do not place heavy or dangerous objects (bottles with liquid) on the refrigerator.
yy Do not put live animals inside the refrigerator.
yy Do not allow children to climb into the product when it is in use.
yy In the event of a gas leak (propane/LPG), ensure adequate ventilation and contact an authorized service
center before resuming use. Do not touch or disassemble the electric outlet of the refrigerator.
yy In the event of a refrigerant leak, move flammable objects away from the refrigerator. Ensure adequate
ventilation and contact an authorized service center.
yy Do not use or place flammable substances (chemicals, medicine, cosmetics, etc) near the refrigerator
or store them inside the refrigerator. Do not place the refrigerator in the vicinity of flammable gas.
yy Do not overfill or pack items too tightly into door bins. Doing so may cause damage to the bin or
personal injury if items are removed with excessive force.
IMPORTANT SAFETY INSTRUCTIONS
5
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
yy This product is not to be used for special purposes such as the storage of medicine or test materials
or for use on ships, etc.
yy Unplug the power plug before cleaning or repairing the refrigerator.
yy When you replace the light bulb in the refrigerator, unplug the refrigerator or turn off the power.
yy Do not modify or extend the power cord.
yy Do not use a dryer to dry the interior. Do not light a candle to remove interior odors.
yy For your safety, this appliance must be properly grounded. Have the wall outlet and the circuit
checked by a qualified electrician to make sure the outlet is properly grounded.
yy Do not use an outlet that can be turned off with a switch. Do not use an extension cord. It is the
user’s responsibility to replace a standard 2-prong wall outlet with a standard 3-prong wall outlet.
yy Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.
yy Do not use an adapter plug and plug the power plug into a multi-outlet extension cord.
yy Disconnect the power cord immediately if you hear a noise, smell a strange odor or detect smoke
coming from the appliance.
yy Turn the power off if water or dust penetrates into the refrigerator. Call a service agent.
yy Do not disassemble or modify the refrigerator.
yy Do not put hands, feet, or metal objects below or behind the refrigerator.
yy Do not operate the refrigerator or touch the power cord with wet hands.
yy In refrigerators with automatic icemakers, avoid contact with the moving parts of the ejector
mechanism or with the heating element that releases the cubes. Do not place fingers or hands on the
automatic ice-making mechanism while the refrigerator is plugged in.
yy When dispensing ice from the dispenser, do not use crystal ceramics.
yy Do not touch the cold surfaces in the freezer compartment with wet or damp hands, when your
refrigerator is in operation.
yy Do not put glass containers, glass bottles or soda in the freezer.
yy This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning the use of the appliance by a person responsible for their safety.
yy Do not refreeze frozen food that has thawed completely. Doing so may result in a serious health
issue.
yy If you are throwing away your old refrigerator, make sure the CFC coolant is removed for proper
disposal by a qualified servicer. If you release CFC coolant, you may be fined or imprisoned in
accordance with the relevant environmental law.
yy Junked or abandoned refrigerators are dangerous, even if they are sitting for only a few days. When
disposing of the refrigerator, remove the packing materials from the door or take off the doors but
leave the shelves in place so that children may not easily climb inside.
yy If connected to a circuit protected by fuses, use time delay fuse.
WARNING
This product contains chemicals known to the State of California to cause cancer and birth defects
or other reproductive harm. Wash hands after handling.
ENGLISH
To reduce the risk of fire, electric shock, or personal injury when using your product, basic safety
precautions should be followed, including the following:
6
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
ENGLISH
To reduce the risk of fire, electric shock, or personal injury when using your product, basic safety
precautions should be followed, including the following:
CAUTION
Installation
yy The refrigerator must be properly installed in accordance with the Installer Instructions that were
taped to the front of the refrigerator.
yy Be careful when you unpack and install the refrigerator. Immediately dispose of plastic and other
packing materials out of reach of children.
yy The appliance must be positioned for easy access to a power source.
Use
yy Close the door carefully when children are around.
yy Keep fingers out of pinch point areas; clearances between the doors and cabinets are
necessarily small. Be careful closing doors when children are nearby.
yy If you store food improperly, be aware that it may fall and cause injury.
yy Do not use aerosols near the refrigerator.
yy Do not store articles on the top of the appliance.
Maintenance
yy Do not use strong detergents like wax or thinners for cleaning. Clean with a soft cloth.
yy Wipe foreign objects (such as dust and water) off the prongs of the power plug and contact
areas regularly.
yy Do not store, disassemble or repair the refrigerator by yourself.
yy Remove any dust or foreign matter from the power plug pins.
yy Do not use a wet or damp cloth when cleaning the plug.
yy If the refrigerator is disconnected from the power supply, you should wait for at least five
minutes before plugging it back in.
yy If you notice a chemical or burning plastic smell or see smoke, unplug the refrigerator
immediately and contact your LG Electronics Service Center.
SAVE THESE INSTRUCTIONS
COMPONENTS
7
Use this page to become more familiar with the parts and features of your refrigerator.
*The appearance and specifications of the actual product may differ depending on the model.
Refrigerator Exterior
Handle
Filtered Water and
Ice Dispenser
Dispenses purified water and ice.
LED Display
Displays the refrigerator and
freezer temperature, the water
filter condition and the dispenser
status.
Control Panel
Opens and closes
the door.
Button
Refrigerator
Preserves food.
LED Light
LED lights up when the
freezer door is opened.
Sets the refrigerator and freezer
temperatures, the water filter
condition and the dispenser mode.
Freezer
Ez Handle
Easily opens the freezer
door.
Preserves frozen food.
ENGLISH
COMPONENTS
8
COMPONENTS
Refrigerator Interior
ENGLISH
LED interior lamps
The interior lamps light up the
inside of the refrigerator.
Water filter
Adjustable Refrigerator Shelf
The shelves in your refrigerator are
adjustable to meet your individual
storage needs.
Door-In-Door Case
Purifies water.
NOTE
The filter should be replaced every
6 months. Please refer to the “Replacing
the filter” section in this
manual for details.
* This function may
not be available,
depending on the
model.
Indoor Ice Bin
Ice cubes are
automatically produced.
The convenience of a “soft cool”
storage area and ease in spreading
product stored in this area.
Cheese & Butter Bin
Cheese & Butter and
Condiment bins, that
are specially designed
for food that can be
stored at a warmer
temperature. This makes
spreading butter and
slicing cheese easier.
Condiment Bin
Crisper
Controls humidity and
helps vegetables and
fruit to stay crisp.
Auto Closing Hinge
The refrigerator doors
and freezer drawers
close automatically when
you push them slightly.
(The door only closes
automatically when it is
open at an angle of less
than 30°.)
Fixed Door Bin
Used to preserve
chilled food or drinks.
Pullout Drawer
Used for extra storage within
the freezer compartment.
Durabase® and Durabase® Divider
The Durabase is a storage space
recommended for the preservation of large
food items. The Durabase Divider is used
to organize the Durabase area into sections.
It can be adjusted from side to side to
accommodate items of different sizes.
Glide‘N’Serve
Allows you to store food
items at a different
temperature than the
regular refrigerator area.
F-Basket
Area in the freezer that
allows you to store
smaller items for quick
cooling.
INSTALLATION
9
Installation Overview
Please read the following installation instructions first after purchasing this product or transporting
it to another location.
1 Unpacking your
refrigerator
2 Choosing the proper
location
4 Connecting the water
supply and water line
5 Leveling and Door
Alignment
Note
Connect to potable water supply only.
3 Disassembling/Assembling
ENGLISH
INSTALLATION
10
INSTALLATION
Specifications
ENGLISH
The appearance and specifications listed in this manual may vary due to constant product
improvements.
Bottom-freezer refrigerator model LFXS30766*
Description
French door refrigerator
Electrical requirements
115 VAC @ 60 Hz
Min. / Max. Water pressure
20 – 120 psi (138 – 827 kPa)
Dimensions
35 3/4" (W) X 36 1/4" (D) X 70 1/4" (H), 48 1/8" (D w/ door open)
908 mm (W) X 921 mm (D) X 1782 mm (H), 1221 mm (D w/ door open)
Net weight
353 lb. (160 kg)
INSTALLATION
Unpacking Your Refrigerator
yyUse two or more people to move and
install the refrigerator. Failure to do so
can result in back or other injury.
yyYour refrigerator is heavy. When moving
the refrigerator for cleaning or service,
be sure to protect the floor. Always pull
the refrigerator straight out when moving
it. Do not wiggle or walk the refrigerator
when trying to move it, as floor damage
could occur.
yyKeep flammable materials and vapors,
such as gasoline, away from the
refrigerator. Failure to do so can result in
fire, explosion, or death.
Remove tape and any temporary labels from your
refrigerator before using. Do not remove any
warning-type labels, the model and serial number
label, or the Tech Sheet that is located under the
front of the refrigerator.
To remove any remaining tape or glue, rub the
area briskly with your thumb. Tape or glue residue
can also be easily removed by rubbing a small
amount of liquid dish soap over the adhesive with
your fingers. Wipe with warm water and dry.
Do not use sharp instruments, rubbing alcohol,
flammable fluids, or abrasive cleaners to remove
tape or glue. These products can damage the
surface of your refrigerator.
Refrigerator shelves are installed in the shipping
position. Please reinstall shelves according to
your individual storage needs.
Choosing the Proper Location
yy Select a place where a water supply can
be easily connected for the automatic
icemaker.
Note
The water pressure must be 20 – 120 psi
or 138 – 827 kPa or 1.4 – 8.4 kgf/cm². If
the refrigerator is installed in an area with
low water pressure (below 20 psi), you can
install a booster pump to compensate for
the low pressure.
yy The refrigerator should always be plugged
into its own individual properly grounded
electrical outlet rated for 115 Volts, 60 Hz,
AC only, and fused at 15 or 20 amperes.
This provides the best performance
and also prevents overloading house
wiring circuits which could cause a fire
hazard from overheated wires. It is
recommended that a separate circuit
serving only this appliance be provided.
Warning
To reduce the risk of electric shock, do not
install the refrigerator in a wet or damp
area.
Flooring
To avoid noise and vibration, the unit must be
leveled and installed on a solidly constructed
floor. If required, adjust the leveling legs to
compensate for the unevenness of the floor.
The front should be slightly higher than the
rear to aid in door closing. Leveling legs can
be turned easily by tipping the cabinet slightly.
Turn the leveling legs to the left to raise the
unit or to the right to lower it. (See Leveling
and Door AlIgnment.)
Note
Installing on carpeting, soft tile surfaces,
a platform or weakly supported structure
is not recommended.
ENGLISH
WARNING
11
12
INSTALLATION
Ambient Temperature
ENGLISH
Install this appliance in an area where the
temperature is between 55°F (13°C) and 110°F
(43°C). If the temperature around the appliance
is too low or high, cooling ability may be
adversely affected.
Removing/Assembling the
Refrigerator Door Handles
Note
When it is necessary to move the
refrigerator through a narrow opening,
removing the doors is the recommended
procedure. If it is necessary to remove
the handles, follow the directions below.
Measuring the Clearances
Too small of a distance from adjacent items
may result in lowered freezing capability and
increased electricity consumption charges.
Allow at least 24 inches (61 cm) in front of the
refrigerator to open the doors, and at least
2 inches (5.08 cm) between the back of the
refrigerator and the wall.
Removing the Handles
1
Loosen the set screws with a 3/32 in.
Allen wrench and remove the handle.
2
Loosen the mounting fasteners that
connect to the refrigerator door and handle
using a 1/4 in. Allen wrench, and remove
the mounting fasteners.
24” (61 cm)
2” (5.08 cm)
Assembling the Handles
1
Assemble the mounting fasteners at
both ends of the handle using a 1/4 in.
Allen wrench.
2
Place the handle on the door by fitting
the handle footprints over the mounting
fasteners and tightening the set screws
with a 3/32 in. Allen wrench.
INSTALLATION
13
Removing/Assembling the
Doors and Drawers
Removing the Handles
When it is necessary to move the refrigerator
through a narrow opening, removing the doors
is the recommended procedure.
1
2
Loosen the set screws located on the
lower side of the handle with a 1/8 in. Allen
wrench and remove the handle.
Loosen the mounting fasteners
connect to the
freezer drawer
and handle
using a 1/4 in.
Allen wrench,
and remove
the mounting
fasteners.
that
Assembling the Handles
1
2
Assemble the mounting fasteners at
both ends of the handle using a 1/4 in. Allen
wrench.
Place the handle on the door by fitting
the handle
footprints over
the mounting
fasteners and
tightening the
set screws
with a 1/8 in.
Allen wrench.
Warning
When assembling or disassembling the
handle:
yy Grasp the handle tightly to avoid dropping it.
yy Do not swing the handle into nearby people
or animals.
yy Make sure that the bracket hole of the
handle fits properly into the stopper bolt of
the door. Assemble the set screws to fix
the handle into place.
yy Make sure that there is not a gap between
the door and handle after assembling the
handle.
Warning
yy If your entrance door is too narrow for the
refrigerator to pass through, remove the
refrigerator doors and move the refrigerator
sideways through the doorway.
yy Use two or more people to remove and
install the refrigerator doors. Failure to do
so can result in back or other injury.
yy Disconnect the electrical supply to the
refrigerator before installing. Failure to do
so could result in serious injury or death.
yy Do not put hands, feet or other objects into
the air vents or bottom of the refrigerator.
You may be injured or receive an electrical
shock.
yy Be careful when handling the hinge and
stopper, to avoid injury.
yy Remove food and bins before detaching the
doors and drawers.
ENGLISH
Removing/Assembling the
Freezer Drawer Handle
14
INSTALLATION
Removing the Left Refrigerator Door
ENGLISH
1
4
The water supply is connected to the
upper right part of the rear surface of the
refrigerator. Remove the ring in the joint
area. Hold the water supply connection
and gently push the Collet to detach the
water supply line as shown in and .
Rotate the hinge lever counterclockwise
. Lift the top hinge free of the hinge
lever latch.
Hinge Lever Latch
Collet
Caution
When lifting the hinge free of the latch, be
careful that the door does not fall forward.
Note
Detachment of the water supply line is
applicable only when detaching the left
refrigerator door.
2
5
Lift the door from the middle hinge pin and
remove the door.
Remove the screw from the hinge cover
at the top of the refrigerator. Lift the hook
(not visible), located at the bottom of the
front side of the cover with a flat-head
screwdriver.
Caution
Place the door, inside facing up, on a
non-scratching surface.
3
Remove the cover and pull out the tube
Disconnect all wire harnesses .
.
INSTALLATION
1
3
Rotate the hinge lever
Lift the top hinge
lever latch.
clockwise.
free of the hinge
Remove the top hinge cover screw .
Lift the hook (not visible), located at the
bottom of the front side of the cover ,
with a flat-head screwdriver.
Hinge Lever Latch
Caution
When lifting the hinge free of the hinge
lever latch, be careful that the door
does not fall forward.
2
Detach the wire harness
.
4
Lift the door from the middle hinge pin and
remove the door.
Caution
Place the door on the floor, inside
facing up, on a non-scratching surface.
ENGLISH
Removing the Right Refrigerator
Door
15
16
INSTALLATION
Assembling the Right Refrigerator Door
ENGLISH
Install the right-side door first.
1
2
3
Connect the wire harness
4
Make sure that the door-switch located
inside the cover is tightly connected.
Position the cover in its place. Insert and
tighten the cover screw .
.
Make sure that the plastic sleeve is
inserted in the bottom of the door. Lower
the door onto the middle hinge pin as
shown in the figure.
Fit the hinge over the hinge lever latch
and slot it into place. Rotate the lever
counterclockwise to secure the hinge.
Hinge Lever Latch
INSTALLATION
4
Push the water supply tube into the hole
on the top case and pull it through the
backplate.
5
Hold the water supply connection and
gently push in the collet to connect the
water supply line as shown in and .
Insert the tube at least 5/8 inch (15 mm) into
the connector. Assemble the clip to the
joint part for fastening.
Install the left refrigerator door after the right
door is installed.
1
2
Make sure that the plastic sleeve is
inserted in the bottom of the door. Install
the refrigerator door onto the middle hinge.
Fit the hinge over the hinge lever latch
and slot it into place. Rotate the lever
clockwise and fasten the hinge.
Collet
Hinge Lever Latch
6
3
Connect all the wire harnesses.
Make sure that the door-switch located
inside the cover is tightly connected. Place
the cover in its position and tighten the
cover screw .
ENGLISH
Assembling the Left Refrigerator
Door
17
18
INSTALLATION
Removing the Freezer Drawers
Note
ENGLISH
In the following figures, the Pullout Drawer
located above the freezer drawer is not shown
for clarity.
Collet
Tube
Caution
Insert Line
Clip
1) Gently press the Collet and insert the
tube until only one line shows on the
tube.
(Correct)
(Incorrect)
yyUse two or more people to remove and
install the freezer drawer. Failure to do so
can result in back or other injury.
yyDo not hold the handle when removing
or replacing the drawer. The handle may
come off and it could cause personal
injury.
yyBe careful of sharp hinges on both sides
of the drawer.
yyWhen you lay the drawer down, be
careful not to damage the floor.
yyDo not sit or stand on the freezer drawer.
yyTo prevent accidents, keep children
and pets away from the drawer. Do not
leave the drawer open. If the Durabase®
storage bin is removed from the freezer
drawer, there is sufficient space for a
small child or pet to crawl inside.
2) Pull the tube to make sure that the
tube is tightly fastened and then insert
the clip.
(Durabase®)
INSTALLATION
Pull the drawer open to full extension.
2
Gently lift and pull out the ice bin.
On the left rail, use a flat blade screwdriver
to push in on the tab to release the drawer
from the rail, as shown below. Once the
left side is loose, push the tab on the right
side with your finger to release the drawer.
Lift the front of the drawer up, then pull it
straight out.
3
Remove the screws from the rails at both
ends.
4
Grip both sides of the drawer and pull it up to
remove it from the rails.
Caution
Do not hold the handle when removing
or replacing the drawer. The handle may
come off, causing personal injury.
5Hold both rails and push them in
simultaneously.
ENGLISH
1
19
20 INSTALLATION
Assembling the Freezer Drawers
ENGLISH
1
ull out both rails simultaneously, until both
P
rails are fully extended.
2
Grasp the drawer on each side and hook the
drawer supports into the rail tabs located on
both sides.
Caution
Do not hold the handle when removing
or replacing the drawer. The handle
may come off, causing personal injury.
3
Lower the door into its final position and
tighten the screws located on both sides.
4
Insert the drawer into the frame, and push
the drawer back into place until you hear a
click.
5
Insert the lower basket in the rail
assembly.
INSTALLATION
21
Connecting the Water Line
This water line installation is not covered by the
refrigerator warranty. Follow these instructions
carefully to minimize the risk of expensive water
damage.
Water hammer (water banging in the pipes) in
house plumbing can cause damage to refrigerator
parts and can lead to water leakage or flooding.
Call a qualified plumber to correct water hammer
before installing the water supply line to the
refrigerator.
Caution
To prevent burns and product damange,
only connect the refrigerator water line to
a cold water supply.
If you use your refrigerator before connecting
the water line, make sure the icemaker power
button is turned off.
Caution
Do not install the icemaker tubing in
areas where temperatures fall below
freezing.
Water Pressure
The water pressure must be between 20 and
120 psi. If the refrigerator is installed in an area
with low water pressure (below 20 psi), you can
install a booster pump to compensate for the low
pressure.
If a reverse osmosis water filtration system is
connected to your cold water supply, this water
line installation is not covered by the refrigerator
warranty. Follow the instructions carefully to
minimize the risk of expensive water damage.
If a reverse osmosis water filtration system is
connected to your cold water supply, the water
pressure to the reverse osmosis system needs
to be a minimum of 40 to 60 psi (276-414 kPa or
2.8-4.2 kgf/cm², less than 2.0-3.0 sec. to fill a cup
of 7 oz or 198 cc capacity).
Caution
Wear eye protection during installation
to prevent injury.
If the water pressure from the reverse osmosis
system is less than 20 psi or 138 kPa or 1.4 kgf/
cm² (takes more than 4.0 sec to fill a cup of 7 oz
or 198 cc capacity):
yy Check to see if the sediment filter in
the reverse osmosis system is blocked.
Replace the filter if necessary.
yy Allow the storage tank on the reverse
osmosis system to refill after heavy
usage.
yy If the issue concerning water pressure
from reverse osmosis remains, call a
licensed, qualified plumber.
yy All installations must be in accordance
with local plumbing code requirements.
What You Will Need
yy Copper Tubing, ¼ in. outer diameter, to
connect the refrigerator to the water
supply. Be sure both ends of the tubing
are cut square.
yy To determine how
much tubing you need:
measure the distance
from the water valve on the back of
the refrigerator to the water supply
pipe. Then, add 8 feet (2.4 m). Be sure
there is sufficient extra tubing (about 8
feet [2.4 m] coiled into 3 turns of about
10 in. [25 cm] diameter) to allow the
refrigerator to move out from the wall
after installation.
yy Power drill.
yy ½ in. or adjustable
wrench.
yy Flat blade and Phillips
head screwdrivers.
yy Two ¼ in. outer
diameter compression
nuts and 2 ferrules (sleeves) to connect the
copper tubing to the shutoff valve and
the refrigerator water valve.
ENGLISH
Before You Begin
22 INSTALLATION
ENGLISH
yy If your existing copper water line has a
flared fitting at the end, you will need
an adapter (available at plumbing supply
stores) to connect the water line to the
refrigerator OR you can cut off the flared
fitting with a tube
cutter and then use a
compression fitting.
yy Shutoff valve to
connect to the cold water line. The shutoff
valve should have a water inlet with a
minimum inside diameter of 5/32 in. at
the point of connection to the COLD
WATER LINE. Saddle-type shutoff valves
are included in many water supply kits.
Before purchasing,
make sure a saddletype valve complies
with your local
plumbing codes.
Water Line Installation Instructions
WARNING
When using any electrical device
(such as a power drill) during
installation, be sure the device is
battery powered, double insulated
or grounded in a manner that will
prevent the hazard of electric shock.
Install the shutoff valve on the nearest
frequently used drinking water line.
1
SHUT OFF THE MAIN WATER SUPPLY
Turn on the nearest faucet to relieve the
pressure on the line.
2
CHOOSE THE VALVE LOCATION
Choose a location for
the valve that is easily
accessible. It is best to
connect into the side of a
vertical water pipe. When
it is necessary to connect
into a horizontal water
pipe, make the connection to the top or
side, rather than at the bottom, to avoid
drawing off any sediment from the water
pipe.
3
DRILL THE HOLE FOR THE VALVE
Drill a ¼ in. hole in
the water pipe using
a sharp bit. Remove
any burrs resulting
from drilling the hole
in the pipe. Be careful
not to allow water
to drain into the drill. Failure to drill a ¼ in.
hole may result in reduced ice production
or smaller cubes.
Note
A self piercing saddle type water valve
should not be used.
Note
The hookup line cannot be white, plastic
tubing. Licensed plumbers must use
only copper tubing (NDA tubing #49595
or #49599) or Cross Link Polyethylene
(PEX) tubing.
INSTALLATION 23
4
7
CONNECT THE TUBING TO THE VALVE
Place the compression nut and ferrule (sleeve)
for copper tubing onto the end of the tubing
and connect it to the shutoff valve. Make
sure the tubing is fully inserted into the valve.
Tighten the compression nut securely.
Pipe Clamp
Saddle-Type
Shutoff Valve
Saddle-Type
Shutoff Valve
Compression
Nut
Vertical Cold
Water Pipe
Packing Nut
Note
Outlet Valve
Commonwealth of Massachusetts
Plumbing Codes 248CMR shall be
adhered to. Saddle valves are illegal
and their use is not permitted in
Massachusetts. Consult with your
licensed plumber.
5
TIGHTEN THE PIPE CLAMP
Tighten the clamp screws until the sealing
washer begins to swell.
NOTE: Do not overtighten the clamp
or you may crush the tubing.
8
FLUSH OUT THE TUBING
Turn the main water supply on and flush out
the tubing until the water is clear.
Shut the water off at the
water valve after about
one quart of water has
been flushed through the
tubing.
9
CONNECT THE TUBING TO THE
REFRIGERATOR
WARNING
Washer
Pipe Clamp
Inlet End
Clamp Screw
6
ROUTE THE TUBING
Route the tubing between the cold water
line and the refrigerator.
Route the tubing through a hole drilled in
the wall or floor (behind the refrigerator or
adjacent base cabinet) as close to the wall
as possible.
Note
Be sure there is sufficient extra tubing
(about 8 feet coiled into 3 turns of
about 10 in. diameter) to allow the
refrigerator to move out from the wall
after installation.
Ferrule (sleeve)
Before making the connection to the
refrigerator, be sure that the refrigerator
power cord is not plugged into the wall
outlet.
a. Remove the plastic flexible cap from the
water valve.
b. Place the compression nut and ferrule
(sleeve) onto the end of the tubing as
shown.
c. Insert the end of the copper tubing into
the connection as far as possible. While
holding the tubing, tighten the fitting.
Tubing Clamp
¼ in. Tubing
¼ in.
Compression
Nut
Ferrule
(sleeve)
Refrigerator
Connection
ENGLISH
FASTEN THE SHUTOFF VALVE
Fasten the shutoff valve to the cold water
pipe with the pipe clamp.
24 INSTALLATION
10 TURN THE WATER ON AT THE SHUTOFF
ENGLISH
VALVE
Tighten any connections that leak.
Caution
Check to see if leaks occur at the water
line connections.
11 PLUG IN THE REFRIGERATOR
Arrange the coil of tubing so that it
does not vibrate against the back of the
refrigerator or against the wall. Push the
refrigerator back to the wall.
12 START THE ICEMAKER
Turn the icemaker on at the control panel.
The icemaker will not begin to operate
until it reaches its operating temperature
of 15°F (–9°C) or below. It will then begin
operation automatically if the icemaker has
been turned on.
Turning On the Power
1
Plug in the refrigerator.
Caution
yyConnect to a rated power outlet.
yyHave a certified electrician check
the wall outlet and wiring for proper
grounding.
yyDo not damage or cut off the ground
terminal of the power plug.
INSTALLATION 25
Leveling and Door Alignment
Door Alignment
After installing, plug the refrigerator’s power
cord into a 3-prong grounded outlet and push
the refrigerator into the final position.
The left refrigerator door has an adjustable nut,
located on the bottom hinge, to raise and lower
the door for proper alignment.
Your refrigerator has two front leveling legs—
one on the right and one on the left. Adjust the
legs to alter the tilt from front-to-back or sideto-side. If your refrigerator seems unsteady, or
you want the doors to close more easily, adjust
the refrigerator’s tilt using the instructions
below:
1
If the space between your doors is uneven, follow
the instructions below to align the doors evenly:
Use the wrench (included with the Use & Care
Guide) to turn the nut in the door hinge to adjust
the height. To the right to raise or to the left to
lower the height.
Turn the leveling leg to the left to raise
that side of the refrigerator or to the right
to lower it. It may take several turns of the
leveling leg to adjust the tilt of the
refrigerator.
The right refrigerator door does not have an
adjustable nut.
If the space between your doors is uneven, follow
the instructions below to align the right door:
Note
1
With one hand, lift up both the inner and
outer door sections of the right door to raise
them at the middle hinge. (Opening the door
may make lifting it easier)
2
With the other hand, use pliers to insert the
snap ring on the middle hinge of the inner
door section as shown. Do not insert the ring
on the hinge of the outer door section.
3
Insert additional snap rings until the right door
is aligned. (Two snap rings are provided with
the unit.)
A flare nut wrench works best, but an
open-end wrench will suffice.
Do not over-tighten.
2
Open both doors again and check to make
sure that they close easily. If the doors do
not close easily, tilt the refrigerator slightly
more to the rear by turning both leveling
legs to the left. It may take several more
turns, and you should turn both leveling
legs the same amount.
Outer
Door
Inner
Door
ENGLISH
Leveling
26 HOW TO USE
ENGLISH
HOW TO USE
Before use
Clean the refrigerator.
Clean your refrigerator thoroughly and wipe off all dust that accumulated during
shipping.
Caution
yy Do not scratch the refrigerator with a sharp object or use a detergent that
contains alcohol, a flammable liquid or an abrasive when removing any tape
or adhesive from the refrigerator,.
yy Do not peel off the model or serial number label or the technical information
on the rear surface of the refrigerator.
Note
Remove adhesive residue by wiping it off with your thumb or dish detergent.
Connect the power supply.
Check if the power supply is connected before use.
Read the “Turning On the Power” section.
Turn off the icemaker if the refrigerator is not yet connected to the
water supply.
Turn off the automatic icemaker and then plug the power plug of the refrigerator
into the grounded electric outlet.
* This is applicable only to certain models.
Caution
Running the automatic icemaker before connecting it to the water
supply may cause the refrigerator to malfunction.
Wait for the refrigerator to cool.
Allow your refrigerator to run for at least two to three hours before putting food in
it. Check the flow of cold air in the freezer compartment to ensure proper cooling.
Caution
Putting food in the refrigerator before it has cooled could cause the
food to spoil, or a bad odor could linger inside the refrigerator.
The refrigerator makes a loud noise after initial operation.
This is normal. The volume will decrease as the temperature lowers.
Open refrigerator doors and freezer drawers to ventilate the interior.
The inside of the refrigerator may smell like plastic at first. Remove any adhesive
tape from inside the refrigerator and open the refrigerator doors and the freezer
drawers for ventilation.
HOW TO USE 27
Control Panel
ENGLISH
* Depending on the model, some of the following functions may not be available.
Control Panel Features
Ice Type
Press the Ice Type button to choose either cubed
or crushed ice. The cubed or crushed ice icon will
illuminate.
Refrigerator Temperature
Indicates the set temperature of the refrigerator
compartment in Celsius (°C) or Fahrenheit (°F).
Freezer Temperature
Indicates the set temperature of the freezer
compartment in Celsius (°C) or Fahrenheit (°F).
To change the temperature mode from °F to °C
(or vice versa) press and hold the Refrigerator
and Freezer temperature buttons simultaneously
for approximately five seconds. The temperature
indication on the display window switches
between Celsius and Fahrenheit.
Note
The displayed temperature is the target
temperature, and not the actual temperature
of the refrigerator. The actual refrigerator
temperature depends on the food inside the
refrigerator.
Fresh Air Filter
Led Display
Indicator
Control
Button
[
(On some
models)
]
The Fresh Air Filter helps remove odors from the
refrigerator. The Fresh Air Filter has two settings,
Auto and Power(PWR). In Auto mode, the Fresh
Air Filter will cycle on and off in increments of ten
minutes on and one hundred ten minutes off. If
set to the Power(PWR) mode, the Fresh Air Filter
will stay on continuously for four hours, cycling on
and off in increments of ten minutes on and five
minutes off. After four hours, the Fresh Air Filter
will switch back to Auto mode.
ress the Air Filter button once for
yy P
Power(PWR) mode.
ress the Air Filter button again to switch
yy P
back to Auto mode.
28 HOW TO USE
Control Panel Features (continued)
ENGLISH
Change Filter
[
(On some
models)
]
When the Change Filter icon turns on, the air
filter needs to be replaced. After replacing the air
filter, press and hold the Fresh Air Filter button for
three seconds to turn the icon light off. Changing
the air filter approximately every six months is
recommended.
Change Water Filter
When the water filter indicator turns on, you
need to change the water filter. After changing
the water filter, press and hold the Change Filter
button for three seconds to turn the indicator
light off. You need to change the water filter
approximately every six months.
Door Alarm
This function increases both ice making and
freezing capabilities.
yy When power is connected to the refrigerator,
the door alarm is initially set to ON. When you
press the Door Alarm button, the display will
change to OFF and the Door Alarm function will
deactivate.
yy When you touch the Ice Plus button, the
graphic will illuminate in the display and
will continue for 24 hours. The function will
automatically shut off after 24 hours.
yy When either the refrigerator or the freezer
door is left open for more than 60 seconds, the
alarm tone will sound to let you know that the
door is open.
yy You can stop this function manually by touching
the button one more time.
yy When you close the door, the door alarm will
stop.
Ice Plus
Ice On/Off
Press the Ice On/Off button for three seconds to
turn the icemaker on/off.
Lock
The Lock function disables every other button
on the display.
yy When power is initially connected to the
refrigerator, the Lock function is off.
Light
When you press the Light button, the dispenser
light will turn on and the indicator will appear on
the LED display.
yy If you want to activate the Lock function to lock
other buttons, press and hold the Lock button
for three seconds or more. The Lock icon will
display and the Lock function is now enabled.
yy To disable the Lock function, press and hold the
Lock button for approximately three seconds.
HOW TO USE 29
Smart Grid
yy To turn the Smart Grid function On/Off.
yy When the refrigerator is in the Power Saving
Mode, the display will remain off until a door
is opened or a button is pressed. Once on, the
display will remain on for 20 seconds.
yy To connect to a Wi-Fi network.
Smart Grid function
Press the Smart Grid button to turn the Smart
Grid function On/Off. When the function is on,
the icon will illuminate. The Smart Grid function
automatically turns on when the refrigerator is
connected to the Wi-Fi network.
When the refrigerator is responding to a Demand
Response (DR) message from the electric
company, the Grid text will illuminate.
Connect function
The Connect function connects the refrigerator to
the Wi-Fi network. Press and hold the Smart Grid
button for 3 seconds to connect to the network.
The icon will blink while the connection is being
made, then turn on once the connection is
successfully made. To disconnect, press and hold
the button again.
Caution
Display Mode (For Store Use Only)
The Display Mode disables all cooling in the
refrigerator and freezer sections to conserve
energy while on display in a retail store. When
activated OFF will display on the control panel
and the display will remain on for 20 seconds.
To deactivate / activate:
With either refrigerator door opened, press
and hold the Refrigerator and Ice Plus buttons
at the same time for five seconds. The control
panel will beep and the temperature settings
will display to confirm that Display Mode
is deactivated. Use the same procedure to
activate the Display Mode.
ENGLISH
The Smart Grid/Connect button serves two
purposes:
Power Saving Mode
30 HOW TO USE
Smart Grid
ENGLISH
The Connect icon allows you to check the status of the refrigerator’s network connection. When
the refrigerator is connected to the network, the Connect icon is illuminated.
Setting Up the Smart App and Connecting the Refrigerator
1
Create an account at Smart ThinQ.
https://us.smartthinq.com/ You will use the
ID and password from this account in the
smart phone application.
2
Download the smart phone app from the
Google Play Store. (LG Smart Refrigerator
app)
3
In the app, select the Smart Model
4
Log in to the app using the Smart ThinQ ID
and password created in step 1.
5
When prompted, select the Non Touch
Screen Model.
6
Choose your wireless router from the list
of routers in the app.
7
If necessary, enter the password for your
router and click the connect button in the
app.
8
Make sure the refrigerator display is active
by pressing any button. Press and hold the
Smart Grid button on the refrigerator for
three seconds. The Connect LED should
blink while the connection is being made.
9
The app will automatically go through the
process of registering your product on
the network, using the information you’ve
provided. This may take some time, and
the Connect LED will continue to blink
during this process. After the registration
process is completed, a message is
displayed and the app will proceed to the
Home screen.
10 Check that the Connect LED is illuminated
to confirm that the Wi-Fi network is
connected. You can now use the app
to control the Smart Features on your
refrigerator.
HOW TO USE
Smart Grid Function
yy You can override the SMART GRID function
at any time (using the Smart Grid button or
application).
yy To use the SMART GRID function, you need to
register your appliance with your electric utility
company.
Using the SMART GRID Function
This feature demands information from your
utility company and sends notifications to the
refrigerator to run high energy-consuming tasks
during off-peak times when demand is lower.
If the refrigerator receives a control signal from
the utility company, the refrigerator will turn on
the GRID LED on the refrigerator display and
control its power consumption according to the
signal.
The refrigerator will respond to the signals
received from the utility company as long as
product performance is maintained.
If the refrigerator receives a SMART GRID signal,
the refrigerator will operate in Delay Appliance
Load (DAL) or Temporary Appliance Load
Reduction (TALR) mode.
Delay Appliance Load (DAL): The refrigerator
responds to a DAL signal by providing a moderate
load reduction for the duration of the delay period.
This mode controls functions that consume a lot
of energy such as adjusting the cooling system,
running the defrost cycle, and making ice.
- When the refrigerator operates in DAL mode,
the “Grid” LED is illuminated on the refrigerator
display.
- DAL mode is automatically deactivated after it
lasts for the amount of time stipulated by the
DAL signal (max. 4 hours) or when you override
the Smart Grid function.
Temporary Appliance Load Reduction (TALR) :
The refrigerator responds to a TALR signal by
aggressively reducing the load for a short time
period, typically 10 minutes. This mode reduces
energy consumption by stopping the compressor
and controlling the functions that consume a lot
of energy such as the defrost cycle and fan.
-W
hen the refrigerator operates in TALR mode,
the “Grid” LED is illuminated on the refrigerator
display.
-T
ALR mode is automatically deactivated after it
lasts for the received duration (max. 10 minutes),
or when you override the Smart Grid function.
The mode is immediately deactivated and the
refrigerator returns to its normal state when the
door is opened or closed, or the dispenser is
used.
ENGLISH
When the refrigerator operates in SMART GRID
mode, the Smart Refrigerator function can control
energy usage or delay the operation of some
functions to save energy during peak usage
periods.
31
32 HOW TO USE
ENGLISH
Smart Grid (continued)
Smart Phone Application Features
Override Smart Grid Mode
1
Lower energy usage based on Demand
Response (DR) signals from the utility
company.
If you want the refrigerator to ignore the SMART
GRID signal from the utility company, you can
override the Smart Grid function by pushing the
Smart Grid button while the refrigerator is in
SMART GRID mode.
When you override the Smart Grid function, the
refrigerator ignores the SMART GRID (Demand
Response) signal and is no longer controlled by
the utility company until the next SMART GRID
signal is sent.
You can also override the Smart Grid function
using the smart phone app.
If the refrigerator is operating in Smart
Saving mode according to the DR signal,
you can see a pop up.
2
API list :
Demand response
- Send demand response signal
Power saving
- Set saving mode
- Get schedule of DR/Delay Defrost
Energy monitoring
- Get setting temperature
- Get door open event
- Get energy consumption
Delay defrost capability
- Insert an delay defrost schedule event
- Update an delay defrost schedule event
- Delete an delay defrost schedule event
- Get the delay defrost schedule
Energy monitoring
Refrigerator can check number of door
openings and power consumption.
3
Remote Control
You can control the Refrigerator
Temperature, Fresh Air Filter and Ice Plus
from the smart phone app.
LG Open API
Please check the detailed specifications on the
notice page on us.smartthinq.com.
Smart Saving_Delay Defrost
Lower energy usage based on time period.
Open API
You can manage Smart Grid features for the LG
Smart Refrigerator.
Smart Saving_Demand Response
4
Push messages.
- When the door is open over ten minutes,
you will receive a push message.
- When Ice Plus is finished, you will receive
a push message.
HOW TO USE 33
FCC Interference Statement
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be installed
and operated with minimum distance 20cm
between the radiator and your body.
This device is intended only for OEM integrators
under the following conditions:
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation.
1) The antenna must be installed such that 20cm
is maintained between the antenna and users,
and
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
-C
onsult the dealer or an experienced radio/TV
technician for help.
IMPORTANT NOTE: In the event that these
conditions can not be met (for example certain
laptop configurations or co-location with another
transmitter), then the FCC authorization is no
longer considered valid and the FCC ID can not be
used on the final product. In these circumstances,
the OEM integrator will be responsible for
re-evaluating the end product (including the
transmitter) and obtaining a separate FCC
authorization.
FCC Caution : Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate this equipment.
This transmitter must not be co-located or
operating in conjunction with any other antenna or
transmitter.
2) The transmitter module may not be co-located
with any other transmitter or antenna.
As long as the two conditions above are met,
further transmitter test will not be required.
However, the OEM integrator is still responsible
for testing their end-product for any additional
compliance requirements required with this
module installed.
End product Labeling
This transmitter module is authorized only for use
in a device where the antenna may be installed
such that 20cm may be maintained between the
antenna and users. The final end product must
be labeled in a visible area with the following:
“Contains FCC ID : BEJ-LGHALCW1404”.
The grantee’s FCC ID can be used only when all
FCC compliance requirements are met.
Manual Information To the End User
The OEM integrator has to be aware not to
provide information to the end user regarding how
to install or remove this RF module in the user’s
manual of the end product which integrates this
module.
The end user manual shall include all required
regulatory information/warning as shown in this
manual.
ENGLISH
This device complies with Part 15 of the FCC
Rules.
Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Radiation Exposure Statement :
34 HOW TO USE
In-Door Ice Bin
ENGLISH
* Depending on the model, some of the
following functions may not be available.
2
Caution
To remove the in-door ice bin, grip the
front handle, slightly lift the lower part,
and slowly pull out the bin as shown.
yy Keep hands and tools out of the ice
compartment door and dispenser chute.
Failure to do so may result in damage or
personal injury.
yy The icemaker will stop producing ice when
the in-door ice bin is full. If you need more
ice, empty the ice bin into the extra ice bin
in the freezer compartment. During use,
the ice can become uneven causing the
icemaker to misread the amount of ice
cubes and stop producing ice. Shaking the
ice bin to level the ice within it can reduce
this problem.
yy Storing cans or other items in the ice bin will
damage the icemaker.
yy Keep the ice compartment door closed
tightly. If the ice compartment door is not
closed tightly, the cold air in the ice bin will
freeze food in the refrigerator compartment.
This could also cause the icemaker to stop
producing ice.
yy If the Ice On/Off button on the display is
set to OFF for an extended period of time,
the ice compartment will gradually warm
up to the temperature of the refrigerator
compartment. To prevent ice cubes from
melting and leaking from the dispenser,
ALWAYS empty the ice bin when the
icemaker is set to OFF for more than a few
hours.
Assembling the In-Door Ice Bin
1
Carefully insert the in-door ice bin while
slightly slanting it to avoid contact with the
icemaker.
2
Avoid touching the auto shutoff (feeler
arm) when replacing the ice bin. See the
label on the ice compartment door for
details.
Auto shutoff
(feeler arm)
Detaching the In-Door Ice Bin
1
Gently pull the handle to open the ice
compartment.
Caution
When handling the ice bin,
keep hands away from the
icemaker tray area to avoid
personal injury.
HOW TO USE 35
Automatic Icemaker
Ice is made in the automatic icemaker and sent
to the dispenser. The icemaker will produce
70-182 cubes in a 24-hour period, depending
on freezer compartment temperature, room
temperature, number of door openings and
other operating conditions.
Personal Injury Hazard
DO NOT place fingers or hands on the
automatic ice making mechanism while the
refrigerator is plugged in.
Icemaker
yy It takes about 12 to 24 hours for a newly
installed refrigerator to begin making ice. Wait
72 hours for full ice production to occur.
yy Ice making stops when the in-door ice bin
is full. When full, the in-door ice bin holds
approximately 6 to 8 (12-16 oz) glasses of ice.
yy Foreign substances or frost on the auto shutoff
(feeler arm) can interrupt ice production. Make
sure the feeler arm is clean at all times for
proper operation.
yy To increase ice production, use the Ice Plus
function. The function increases both ice
making and freezing capabilities.
Auto shutoff (feeler arm)
Turning the Automatic Icemaker
On or Off
To turn the automatic icemaker On/Off, press
and hold the Ice On/Off button on the control
panel for three seconds.
ENGLISH
* Depending on the model, some of the
following functions may not be available.
Warning
36 HOW TO USE
ENGLISH
Automatic Icemaker
(continued)
Caution
yy The first ice and water dispensed may
include particles or odor from the water
supply line or the water tank.
yy Throw away the first few batches of ice.
This is also necessary if the refrigerator has
not been used for a long time.
yy Never store beverage cans or other items in
the ice bin for the purpose of rapid cooling.
Doing so may damage the icemaker or the
containers may burst.
yy If discolored ice is dispensed, check the
water filter and water supply. If the problem
continues, contact a qualified service
center. Do not use the ice or water until the
problem is corrected.
yy Keep children away from the dispenser.
Children may play with or damage the
controls.
yy The ice passage may become blocked with
frost if only crushed ice is used. Remove the
frost that accumulates by removing the ice
bin and clearing the passage with a rubber
spatula. Dispensing cubed ice can also help
prevent frost buildup.
yy Never use thin crystal glass or crockery to
collect ice. Such containers may chip or
break resulting in glass fragments in the ice.
yy Dispense ice into a glass before filling it
with water or other beverages. Splashing
may occur if ice is dispensed into a glass
that already contains liquid.
yy Never use a glass that is exceptionally
narrow or deep. Ice may jam in the ice
passage and refrigerator performance may
be affected.
yy Keep the glass at a proper distance from
the ice outlet. A glass held too close to the
outlet may prevent ice from dispensing.
yy To avoid personal injury, keep hands out of
the ice door and passage.
yy Never remove the dispenser cover.
yy If ice or water dispenses unexpectedly, turn
off the water supply and contact a qualified
service center.
When You Should Turn the
Icemaker Off
yy When the water supply will be shut off
for several hours.
yy When the ice bin is removed for more
than one or two minutes.
yy When the refrigerator will not be used
for several days.
Note
The ice bin should be emptied when the
Ice On/Off button is turned to the OFF
mode.
Normal Sounds You May Hear
yy The icemaker water valve will buzz as
the icemaker fills with water. If the
power button has been turned on, the
ice maker will buzz even if it has not yet
been hooked up to water. To stop the
buzzing, press the power button to turn
it off.
Note
Keeping the power turned on to the
icemaker before the water line is
connected can damage the icemaker.
yy You will hear the sound of cubes
dropping into the bin and water running
in the pipes as the icemaker refills.
Preparing For Vacation
Set the icemaker power button to OFF and
shut off the water supply to the refrigerator.
Note
The ice bin should be emptied any time
the Ice On/Off button is turned off.
If the ambient temperature will drop below
freezing, have a qualified technician drain
the water supply system to prevent serious
property damage due to flooding caused by
ruptured water lines or connections.
HOW TO USE 37
Ice and Water Dispenser
Incorrect Way
Correct Way
ENGLISH
* Depending on the model, some of the
following functions may not be available.
Water
Caution
Keep children away from the dispenser.
Children may play with or damage the
controls.
Dispenser
Ice
Water switch
Caution
Ice switch
Throw away the first few batches of ice
(about 24 cubes). This is also necessary
if the refrigerator has not been used for
a long time.
Stand
Using the Dispenser
yy To dispense cold water, push on the
water switch with a glass.
yy To dispense ice, push on the ice switch
with a glass.
Note
yy If discolored ice is dispensed, check
the water filter and water supply. If the
problem continues, contact a qualified
service center. Do not use the ice or
water until the problem is corrected.
Locking the Dispenser
Press and hold the Alarm and Lock buttons
simultaneously for three seconds to lock the
dispenser and all the control panel functions.
Follow the same instructions to unlock.
Cleaning the Dispenser Stand
1
Grip the stand with both hands and pull it
out.
2
Wipe out dirty areas with a clean cloth.
yy The dispenser will not operate when
either of the refrigerator doors are open.
yy If dispensing water or ice into a container
with a small opening, place it as close to
the dispenser as possible.
yy Some dripping may occur after
dispensing. Hold your cup beneath
the dispenser for a few seconds after
dispensing to catch all of the drops.
38 HOW TO USE
Storing Food
ENGLISH
Food Preservation Location
Each compartment inside the refrigerator is designed to store different types of food.
Store your food in the optimal space to enjoy the freshest taste.
Vegetable storage
(Crisper)
Preserves vegetables and
fruit.
Ice storage bin
If a large amount of ice is
needed, transfer the ice in
the in-door ice bin to the ice
storage bin.
Durabase®
Largest storage space in
the freezer.
Adjustable refrigerator shelf
Adjustable shelves to meet
your individual storage needs.
Recommended types of
foods to store in Door-In-Door
section. Foods like Butter,
Margarine, Cream Cheese,
Peanut Butter, Ketchup,
Mustard, Relish etc.
Glide‘N’Serve
Provides storage space with a
variable temperature control that
keeps the compartment at a different
temperature than the refrigerator.
It is a convenient place to store
sandwiches or meat to be cooked.
Caution
yy Do not store food with high moisture content towards the top of the refrigerator. The moisture
could come in direct contact with the cold air and freeze.
yy Wash food before storing it in the refrigerator. Vegetables and fruit should be washed, and food
packaging should be wiped down to prevent adjacent foods from being contaminated.
yy If the refrigerator is kept in a hot and humid place, frequent opening of the door or storing a lot of
vegetables in the refrigerator may cause condensation to form. Wipe off the condensation with a
clean cloth or a paper towel.
yy If the refrigerator door or freezer drawer is opened or closed too often, warm air may penetrate the
refrigerator and raise its temperature. It can also increase the running costs of the unit.
yy Do not overfill or pack items too tightly into door bins. Doing so may cause damage to the bin or
personal injury if items are removed with excessive force.
yy Do not store glass bottles in the pantry. If they are frozen, they can break and cause personal injury.
Note
yy If you are leaving home for a short period of time, like a short vacation, the refrigerator should
be left on. Refrigerated foods that are able to be frozen will stay preserved longer if stored in the
freezer.
yy If you are leaving the refrigerator turned off for an extended period of time, remove all food and
unplug the power cord. Clean the interior, and leave the door open to prevent fungi from growing
in the refrigerator.
HOW TO USE 39
Food Storage Tips
Wrap or store food in the refrigerator in airtight
and moisture-proof material unless otherwise
noted. This prevents food odor and taste transfer
throughout the refrigerator. For dated products,
check date code to ensure freshness.
Food
How to
Butter or
Margarine
Keep opened butter in a covered
dish or closed compartment.
When storing an extra supply,
wrap in freezer packaging and
freeze.
Cheese
Store in the original wrapping
until you are ready to use it.
Once opened, rewrap tightly in
plastic wrap or aluminum foil.
Milk
Wipe milk cartons. For coldest
milk, place containers on
interior shelf.
Eggs
Store in original carton on
interior shelf, not on door shelf.
Fruit
Do not wash or hull the fruit
until it is ready to be used. Sort
and keep fruit in its original
container, in a crisper, or store
in a completely closed paper
bag on a refrigerator shelf.
Leafy
Vegetables
Remove store wrapping and
trim or tear off bruised and
discolored areas. Wash in cold
water and drain. Place in plastic
bag or plastic container and
store in crisper.
Vegetables
with skins
(carrots,
peppers)
Place in plastic bags or plastic
container and store in crisper.
Fish
Store fresh fish and shellfish
in the freezer section if they
are not being consumed the
same day of purchase. It is
recommended to consume
fresh fish and shellfish the
same day purchased.
Leftovers
Cover leftovers with plastic wrap
or aluminum foil, or store in
plastic containers with tight lids.
Note
Check a freezer guide or a reliable cookbook
for further information about preparing food
for freezing or food storage times.
Freezing
Your freezer will not quick-freeze a large
quantity of food. Do not put more unfrozen
food into the freezer than will freeze within
24 hours (no more than 2 to 3 lbs. of food per
cubic foot of freezer space). Leave enough
space in the freezer for air to circulate around
packages. Be careful to leave enough room at
the front so the door can close tightly.
Storage times will vary according to the quality
and type of food, the type of packaging or wrap
used (how airtight and moisture-proof) and
the storage temperature. Ice crystals inside a
sealed package are normal. This simply means
that moisture in the food and air inside the
package have condensed, creating ice crystals.
Note
Allow hot foods to cool at room temperature
for 30 minutes, then package and freeze.
Cooling hot foods before freezing saves
energy.
ENGLISH
* The following tips may not be applicable
depending on the model.
Storing Frozen Food
40 HOW TO USE
ENGLISH
Storing Frozen Food (continued)
Glide‘N’Access™
Packaging
The Glide’N’Access™ slides out for easy loading
of large items, like sheet cakes or deli trays, and
to give you easy access to items stored at the
back of the shelf.
To slide out, grasp the handle at the front of the
shelf and gently pull forward. Push back to slide
in.
Successful freezing depends on correct
packaging. When you close and seal the
package, it must not allow air or moisture in or
out. If it does, you could have food odor and
taste transfer throughout the refrigerator and
could also dry out frozen food.
Packaging recommendations:
yy Rigid plastic containers with tight-fitting
lids
Caution
Take care when sliding the
Glide'N'Access™ in and out, as taller
items may fall, causing damage or injury.
yy Straight-sided canning/freezing jars
yy Heavy-duty aluminum foil
yy Plastic-coated paper
yy Non-permeable plastic wraps
yy Specified freezer-grade self-sealing plastic
bags
Follow package or container instructions for
proper freezing methods.
Do not use
Glide‘N’Serve
yy Bread wrappers
The Glide’N’Serve provides storage space
with a variable temperature control that can
keep the compartment at a slightly different
temperature than the refrigerator section. This
drawer can be used for large party trays, deli
items and beverages. (This drawer should
not be used for vegetables that require high
humidity.)
yy Non-polyethylene plastic containers
yy Containers without tight lids
yy Wax paper or wax-coated freezer wrap
yy Thin, semi-permeable wrap
Press the Select button to choose between
Produce (Cold), Deli (Colder) and Meat
(Coldest).
Meat
Deli
Produce
Select
HOW TO USE
Glide‘N’Serve and Humidity
Controlled Crisper
To Remove Glide‘N’Access™
To remove the Glide‘N’Access™, pull out the
shelf to full extension, lift the front up and pull
straight out.
To remove the Humidity Controlled Crisper and
the Glide’N’Serve, pull out the Crisper and
Glide’N’Serve to full extension, lift the front
up, and pull straight out.
Door Bins
The door bins are removable for easy cleaning
and adjustment.
1 To remove the bin, simply lift the bin up and
pull straight out.
To install, slightly tilt up the front, insert the
drawer into the frame and push it back into
place.
2 To replace the bin, slide it in above the
desired support and push down until it snaps
into place.
Note
Some bins may vary in appearance and
will only fit in one location.
Caution
yyDo not apply excessive force while
detaching or assembling the storage
bins.
yyDo not use the dishwasher to clean
the storage bins and shelves.
yyRegularly detach and wash the
storage bins and shelves; they can
become easily contaminated by the
food.
ENGLISH
Detaching and Assembling the
Storage Bins
41
42 HOW TO USE
ENGLISH
Door-In-Door
Door-In-Door Case
The Door-In-Door compartment allows for easy
access to commonly used food items.
To open the Door-In-Door case, slightly push
the marked area to pop it open. The Door-InDoor Case is removable for easy cleaning and
adjustment.
The outer Door-In-Door door includes two door
bins, the Cheese & Butter and Condiment bins,
that are specially designed for food that can be
stored at a warmer temperature. This makes
spreading butter and slicing cheese easier.
Cheese & Butter
Bin
Condiment Bin
1 To remove the Door-In-Door case, lift up and
pull out.
Door-In-Door Compartment
To access the Door-in-Door compartment, lightly
press the button on the right refrigerator door
handle to open the door.
There is no need to grip the handle when opening
the Door-in-Door compartment.
If the handle is gripped when the button is
pressed you may hear a clicking noise. This is
Normal.
2 To replace the Door-In-Door case, line the
tabs on the Door-In-Door Case with the slots
on the door and push down until it snaps
into place.
HOW TO USE 43
Door-In-Door Lower Shelf
The Door-In-Door inner and outer door bins are
removable for easy cleaning.
The Door-In-Door lower shelf is removable for
easy cleaning.
1 To remove the door bins, lift up and pull out.
1 To remove the lower shelf, lift the shelf
2 To replace the door bins, slide the door bin
in above the desired support and push down
until it snaps into place.
retainer up and out.
2 Remove the two screws from the shelf and
pull it straight out.
3 Reverse the procedure to replace the shelf.
1
2
3
ENGLISH
Door-In-Door Door Bins
44 HOW TO USE
ENGLISH
Adjusting the Refrigerator
Shelves
The shelves in your refrigerator are adjustable
to meet your individual storage needs. Your
model may have glass or wire shelves.
Using the Folding Shelf
You can store taller items, such as a gallon
container or bottles, by simply pushing the
front half of the shelf underneath the back half
of the shelf. Pull the front of the shelf toward
you to return to a full shelf.
Adjusting the shelves to fit items of different
heights will make finding the exact item you
want easier. Doing so will also reduce the
amount of time the refrigerator door is open
which will save energy.
Detaching the Shelf
Tilt up the front of the shelf and lift it straight
up. Pull the shelf out.
Caution
yy Do not clean glass shelves with
warm water while they are cold.
Shelves may break if exposed to
sudden temperature changes or
impact.
yy Glass shelves are heavy. Use special
care when removing them.
Assembling the Shelf
Tilt the front of the shelf up and guide the shelf
hooks into the slots at a desired height. Then,
lower the front of the shelf so that the hooks
drop into the slots.
Caution
Make sure that shelves are level from
one side to the other. Failure to do so
may result in the shelf falling or spilling
food.
MAINTENANCE 45
Cleaning
yy Both the refrigerator and freezer sections defrost automatically; however, clean both
sections about once a month to prevent odors.
yy Wipe up spills immediately.
yy Always unplug the refrigerator before cleaning.
General Cleaning Tips
yy Unplug refrigerator or disconnect power.
yy Remove all removable parts, such as
shelves, crispers, etc.
yy Use a clean sponge or soft cloth and a
mild detergent in warm water. Do not
use abrasive or harsh cleaners.
yy Hand wash, rinse and dry all surfaces
thoroughly.
Inside Walls (allow freezer to warm
up so the cloth will not stick)
To help remove odors, you can wash the inside
of the refrigerator with a mixture of baking
soda and warm water. Mix 2 tablespoons of
baking soda to 1 quart of water (26 g soda
to 1 liter water). Be sure the baking soda is
completely dissolved so it does not scratch the
surfaces of the refrigerator.
Door Liners and Gaskets
Exterior
Waxing external painted metal surfaces helps
provide rust protection. Do not wax plastic
parts. Wax painted metal surfaces at least
twice a year using appliance wax (or auto paste
wax). Apply wax with a clean, soft cloth.
For products with a stainless steel exterior,
use a clean sponge or soft cloth and a mild
detergent in warm water. Do not use abrasive
or harsh cleaners. Dry thoroughly with a soft
cloth.
Caution
yy Do not use a rough cloth or sponge
when cleaning the interior and exterior
of the refrigerator.
yy Do not place your hand on the bottom
surface of the refrigerator when
opening and closing.
Warning
se non-flammable cleaner. Failure to do
U
so can result in fire, explosion, or death.
Use a clean sponge or soft cloth and a mild
detergent in warm water. Do not use cleaning
waxes, concentrated detergents, bleaches,
or cleaners containing petroleum on plastic
refrigerator parts.
Plastic Parts (covers and panels)
Use a clean sponge or soft cloth and a mild
detergent in warm water. Do not use glass
cleaners, abrasive cleansers, or flammable
fluids. These can scratch or damage the
material.
Condenser Coils
Use a vacuum cleaner with an attachment to
clean the condenser cover and vents. Do not
remove the panel covering the condenser coil
area.
ENGLISH
MAINTENANCE
46 MAINTENANCE
ENGLISH
Replacing the Fresh Air Filter
Replacing the Water Filter
It is recommended that you replace the air filter:
It is recommended that you replace the water
filter:
yy Approximately every six months.
yy When the CHANGE FILTER light turns on.
yy Approximately every six months.
yy When the water filter indicator turns on.
yy When the water dispenser output
decreases.
yy When the ice cubes are smaller than normal.
1 Remove the Old Filter
Turn the filter cover to the left to detach
it from the refrigerator wall. The filter is
located on the inside of the filter cover.
Remove the filter from the cover and
replace it with a new filter.
Before Replacing the Water Filter:
If the top shelf, located below the water filter,
is in the highest position, it will need to be
removed prior to replacing the water filter.
To remove any shelf—Tilt up the front of the
shelf and lift it . Pull the shelf out.
2
Install a New Air Filter.
Place the new filter inside of the cover
with the side that says “Front” facing
outward. Turn the filter cover to the right
to attach it to the refrigerator wall.
After changing the filter, push and hold the
Air Filter button for three seconds to reset
the filter sensor.
MAINTENANCE 47
Remove the old water filter.
Lower or remove
the top left shelf to
allow the water filter
to rotate all the way
down.
Press the push button
to open the water
filter cover.
NOTE: Replacing the water filter causes a small
amount of water (around 1 oz. or 25 cc) to drain.
Place a cup under the front end of the water
filter cover to collect any leaking water. Hold the
water filter upright, once it is removed, to prevent
any remaining water from spilling out
of the water filter.
Pull the water filter
downward and pull
out. Make sure to
rotate the filter down
completely before
pulling it out of the
manifold hole.
3
After the water filter is replaced,
dispense 2.5 gallons of water (flush for
approximately 5 minutes) to remove
trapped air and contaminants from the
system. Do not dispense the entire 2.5
gallon amount continuously. Depress and
release the dispenser pad for cycles of 30
seconds ON and 60 seconds OFF.
4
Water Filter Bypass Plug
Keep the water
filter bypass plug.
You MUST use
the water filter
bypass plug when a
replacement water
filter cartridge is not
available.
Water Filter
Bypass Plug
Caution
DO NOT operate refrigerator without
water filter or water filter plug installed.
Note
2 Replace with a new water filter.
Take the new water filter out of its packing
and remove the protective cover from the
o-rings. With
the water
filter tabs in
the horizontal
position, push
the new water
filter into the
manifold hole
until it stops.
Rotate the water filter up
into position and close
the cover. The cover
will click when closed
correctly.
yy To purchase a replacement water filter:
Visit your local dealer or distributor
Web: Find Parts & Accessories from
Support section of lg.com
Call : 1-800-243-0000 (USA)
1-888-542-2623 (Canada)
yy Part number of the replacement water
filter: ADQ36006101
ENGLISH
1
48 MAINTENANCE
Performance Data Sheet
ENGLISH
Model: LG ADQ36006101-S
Use Replacement Cartridge: ADQ36006101
The concentration of the indicated substances in water entering the system was reduced to a
concentration less than or equal to the permissible limit for water leaving the system as specified in
NSF/ANSI Standard 42 and Standard 53.
System tested and certified by NSF International against NSF/ANSI Standard 42
and Standard 53 for the reduction of substances listed below.
Max
NSF
Average
Avg %
Permissible
Reduction
Product Water
Reduction
Product Water
equirements
Concentration
Concentration
Contaminant
Reduction
Average
Influent
NSF specified
Challenge
Concentration
Chlorine Taste and
Odor
2.1 mg/L
2.0 mg/L ± 10%
97.2%
0.06 mg/L
N/A
≥ 50%
J-00049247
Nominal Particulate
Class I, , ≥ 0.5 to <
1.0 µm
5,600,000 pts/
mL
At least 10,000
particles/mL
98.7%
73,000 pts/ml
N/A
≥ 85%
J-00049282
Asbestos
190 MFL
107 to 108 MFL;
fibers greater
than 10 µm in
length
>99%
< 1MLF
N/A
≥ 99%
J-0004928
Atrazine
0.0094 mg/L
0.009 mg/L
± 10%
94.7%
0.00005 mg/L
0.003 mg/L
N/A
J-00049293
Benzene
0.016 mg/L
0.015 mg/L
± 10%
96.7%
0.005 mg/L
0.005 mg/L
N/A
J-00049300
Carbofuran
0.08 mg/L
0.08 mg/L
± 10%
98.1%
0.002 mg/L
0.04 mg/L
N/A
J-00049294
Lindane
0.002 mg/L
0.002 mg/L
± 10%
98.2%
0.00004 mg/L
0.0002 mg/L
N/A
J-00051975
P-Dichlorobenzene
0.22 mg/L
0.225 mg/L
± 10%
99.8%
0.0005 mg/L
0.075 mg/L
N/A
J-00049298
Toxaphene
0.014 mg/L
0.015 mg/L
± 10%
93%
0.001 mg/L
0.003 mg/L
N/A
J-00049302
2,4-D
0.213 mg/L
0.210 mg/L
± 10%
95.2%
0.009 mg/L
0.07 mg/L
N/A
J-00049284
Lead pH @6.5
0.150 mg/L
0.15 mg/L
± 10%
>99.3%
0.001 mg/L
0.010 mg/L
N/A
J-00051974
Lead pH @8.5
0.150 mg/L
0.15 mg/L
± 10%
>99.3%
0.001 mg/L
0.010 mg/L
N/A
J-00049277
Mercury @ pH 6.5
0.0059 mg/L
0.006 mg/L
± 10%
96.1
0.0002 mg/L
0.002 mg/L
N/A
J-00053886
Mercury @ pH 8.5
0.0058 mg/L
0.006 mg/L
± 10%
90.1
0.0006 mg/L
0.002 mg/L
N/A
J-00051972
120,000
cysts/L
Minimum 50,000
cysts/L
99.99%
<1 cyst/L
N/A
≥ 99.95%
J-00049281
Cyst*
* Based on the use of Cryptosporidium parvum oocysts.
NSF Test
Report
MAINTENANCE 49
Application Guidelines/Water Supply Parameters
0.5 gpm (1.9 lpm)
Water Supply
Potable Water
Water Pressure
20 -120 psi (138 - 827 kPa)
Water Temperature
33°F - 100°F (0.6°C - 38°C)
It is essential that the manufacturer’s
recommended installation, maintenance and
filter replacement requirements be carried out
for the product to perform as advertised.
NOTE
yy While the testing was performed
under standard laboratory conditions,
actual performance may vary.
Replacement Cartridge: ADQ36006101
For estimated costs of replacement elements
please call USA 1-800-243-0000
CANADA 1-888-LGCANADA (24 hours per
day/7 days per week) or visit our website at
www.lg.com
3M is a trademark of 3M Company.
NSF is a trademark of NSF International.
© 2009 3M Company. All rights reserved.
Warning
To reduce the risk associated with choking:
yy Do not allow children under 3 years of age
to have access to small parts during the
installation of this product.
To reduce the risk associated with the
ingestion of contaminants:
yy Do not use with water that is
microbiologically unsafe or of unknown
quality without adequate disinfection before
or after the system. Systems certified for
cyst reduction may be used on disinfected
water that may contain filterable cysts. EPA
Establishment # 070595-MEX-001
Manufactured for LG®Electronics by CUNO
Incorporated 400 Research Parkway Meriden,
CT 06450 U.S.A Worldwide: 203-237-5541
www.cuno.com
ENGLISH
Service Flow
Caution
To reduce the risk associated with property
damage due to water leakage:
yy Read and follow Use Instructions before
installation and use of this system.
yy Installation and use MUST comply with all
state and local plumbing codes.
yy Do not install if water pressure exceeds
120 psi (827 kPa). If your water pressure
exceeds 80 psi, you must install a
pressure limiting valve. Contact a plumbing
professional if you are uncertain how to
check your water pressure.
yy Do not install where water hammer
conditions may occur. If water hammer
conditions exist you must install a water
hammer arrester. Contact a plumbing
professional if you are uncertain how to
check for this condition.
yy Do not install on hot water supply lines.
The maximum operating water temperature
of this filter system is 100°F (37.8°C).
yy Protect filter from freezing. Drain filter when
temperatures drop below 40°F (4.4°C).
yy The disposable filter cartridge MUST be
replaced every 6 months, at the rated
capacity or if a noticeable reduction in flow
rate occurs.
yy Protect from freezing, remove filter
cartridge when temperatures are expected
to drop below 33° F.
yy Do not install systems in areas where
ambient temperatures may go above
110° F (43.3° C).
yy Where a backflow prevention device is
installed on a water system, a device
for controlling pressure due to thermal
expansion must be installed.
yy Ensure all tubing and fittings are secure and
free of leaks.
50 MAINTENANCE
ENGLISH
SMART DIAGNOSIS
51
Should you experience any problems with
your refrigerator, it has the capability of
transmitting data via your telephone to the LG
service center. This gives you the capability of
speaking directly to our trained specialists. The
specialist records the data transmitted from
your machine and uses it to analyze the issue,
providing a fast and effective diagnosis.
If you experience problems with your
refrigerator, call 1-800-243-0000. Only use the
Smart Diagnosis™ feature when instructed
to do so by the LG call center agent. The
transmission sounds that you will hear are
normal and sound similar to a fax machine.
Smart Diagnosis™ cannot be activated unless
your refrigerator is connected to power. If
your refrigerator is unable to turn on, then
troubleshooting must be done without using
Smart Diagnosis™.
3 Hold the mouthpiece of your phone in
front of the speaker
that is located on
the right hinge of
the refrigerator door,
when instructed to
do so by the call
center.
4 Press and hold the Freezer Temperature
button for three seconds while continuing
to hold your
phone to the
speaker.
5 After you hear three beeps, release the
Freezer Temperature button.
6 Keep the phone in place until the tone
Using Smart Diagnosis™
First, call 1-800-243-0000. Only use the Smart
Diagnosis™ feature when instructed to do so
by the LG call center agent.
1 Lock the display. To lock the display,
press and hold the Lock button for three
seconds. (If the display has been locked
for over five minutes, you must deactivate
the lock and then reactivate it.)
transmission has finished. The display will
count down the time. Once the countdown
is over and the tones have stopped,
resume your conversation with the
specialist, who will then be able to assist
you in using the information transmitted
for analysis.
NOTE
yy For best results, do not move the phone
while the tones are being transmitted.
yy If the call center agent is not able to get
an accurate recording of the data, you
may be asked to try again.
NOTE
2 Open the right refrigerator door.
yy Call quality differences by region may
affect the function.
yy Use the home telephone for better
communication performance, resulting
in better service.
yy Bad call quality may result in poor data
transmission from your phone to the
machine, which could cause Smart
Diagnosis™ to malfunction.
ENGLISH
SMART DIAGNOSIS™
52 TROUBLESHOOTING
ENGLISH
TROUBLESHOOTING
Review the Troubleshooting section before calling for service; doing so will save you both time
and money.
Problem
Refrigerator and
Freezer section
are not cooling.
Cooling System
runs too much.
Possible Causes
Solutions
The refrigerator control is set to Turn the control ON. Refer to the Setting the
OFF (some models).
Controls section for proper temperature settings.
Refrigerator is in the defrost
cycle.
During the defrost cycle, the temperature of
each compartment may rise slightly. Wait 30
minutes and confirm the proper temperature
has been restored once the defrost cycle has
completed.
Refrigerator was recently
installed.
It may take up to 24 hours for each compartment
to reach the desired temperature.
Refrigerator was recently
relocated.
If the refrigerator was stored for a long period of
time or moved on its side, it is necessary for the
refrigerator to stand upright for 24 hours before
connecting it to power.
Refrigerator is replacing an
older model.
Modern refrigerators require more operating
time but use less energy due to more efficient
technology.
Refrigerator was recently
plugged in or power restored.
The refrigerator will take up to 24 hours to cool
completely.
Door opened often or a large
amount of food / hot food was
added.
Adding food and opening the door warms the
refrigerator, requiring the compressor to run
longer in order to cool the refrigerator back
down. In order to conserve energy, try to get
everything you need out of the refrigerator
at once, keep food organized so it is easy to
find, and close the door as soon as the food is
removed. (Refer to the Food Storage Guide.)
Doors are not closed
completely.
Firmly push the doors shut. If they will not
shut all the way, see the Doors will not
close completely or pop open section in
Troubleshooting.
Refrigerator is installed in a hot
location.
The compressor will run longer under warm
conditions. At normal room temperatures (70°F)
expect your compressor to run about 40% to
80% of the time. Under warmer conditions,
expect it to run even more often. The refrigerator
should not be operated above 110°F.
Condenser / back cover is
clogged.
Use a vacuum cleaner with an attachment to
clean the condenser cover and vents. Do not
remove the panel covering the condenser coil
area.
TROUBLESHOOTING 53
Problem
Possible Causes
Doors are opened often or for
long periods of time.
It may take up to 24 hours for each compartment
to reach the desired temperature.
Rearrange items to allow air to flow throughout
the compartment. Refer to the Airflow diagram in
the Using Your Refrigerator section.
When the doors are opened often or for long
periods of time, warm, humid air enters the
compartment. This raises the temperature and
moisture level within the compartment. To lessen
the effect, reduce the frequency and duration of
door openings.
Unit is installed in a hot location. The refrigerator should not be operated in
temperatures above 110F.
A large amount of food or
hot food was added to either
compartment.
Adding food warms the compartment requiring
the cooling system to run. Allowing hot food to
cool to room temperature before putting it in the
refrigerator will reduce this effect.
Doors not closed correctly.
See the Doors will not close correctly or pop
open section in Troubleshooting.
Temperature control is not set
correctly.
If the temperature is too warm, adjust the
control one increment at a time and wait for the
temperature to stabilize. Refer to the Setting the
Controls section for more information.
Defrost cycle has recently
completed.
During the defrost cycle, the temperature of each
compartment may rise slightly and condensation
may form on the back wall. Wait 30 minutes
and confirm the proper temperature has been
restored once the defrost cycle has completed.
ENGLISH
Refrigerator was recently
Refrigerator or
Freezer section is installed.
too warm.
Air vents are blocked.
Solutions
54 TROUBLESHOOTING
Problem
ENGLISH
Interior moisture
buildup.
Possible Causes
Solutions
Doors are opened often or for
long periods of time.
When the doors are opened often or for long
periods of time, warm, humid air enters the
compartment. This raises the temperature and
moisture level within the compartment. To
lessen the effect, reduce the frequency and
duration of door openings.
Doors not closed correctly.
See the Doors will not close correctly section in
the Troubleshooting section.
Weather is humid.
Humid weather allows additional moisture
to enter the compartments when the doors
are opened leading to condensation or frost.
Maintaining a reasonable level of humidity in the
home will help to control the amount of moisture
that can enter the compartments.
Defrost cycle recently
completed.
During the defrost cycle, the temperature of each
compartment may rise slightly and condensation
may form on the back wall. Wait 30 minutes and
confirm that the proper temperature has been
restored once the defrost cycle has completed.
Food is not packaged correctly.
Food stored uncovered or unwrapped, and damp
containers can lead to moisture accumulation
within each compartment. Wipe all containers
dry and store food in sealed packaging to prevent
condensation and frost.
Food is freezing
Food with high water content
in the refrigerator was placed near an air vent.
compartment.
Refrigerator temperature control
is set incorrectly.
Rearrange items with high water content away
from air vents.
If the temperature is too cold, adjust the control
one increment at a time and wait for the
temperature to stabilize. Refer to the Setting the
Controls section for more information.
Refrigerator is installed in a cold When the refrigerator is operated in temperature
location.
below 41°F (5°C), food can freeze in the
refrigerator compartment. The refrigerator should
not be operated in temperature below 55°F (13°C).
Frost or ice
crystals form
on frozen food
(outside of
package).
Door is opened frequently or for When the doors are opened often or for long
long periods of time.
periods of time, warm, humid air enters the
compartment. This raises the temperature and
moisture level within the compartment. Increased
moisture will lead to frost and condensation.
To lessen the effect, reduce the frequency and
duration of door openings.
Door is not closing properly.
Refrigerator or
Incorrect temperature control
Freezer section is settings.
too cold.
Refer to the Doors will not close correctly or pop
open section in the Troubleshooting section.
If the temperature is too cold, adjust the control
one increment at a time and wait for the
temperature to stabilize. Refer to the Setting the
Controls section for more information.
TROUBLESHOOTING 55
Problem
Possible Causes
Solutions
This is normal for food items with a high water
content.
Icemaker is not
making enough
ice.
Demand exceeds ice storage
capacity.
The icemaker will produce approximately 70-182
cubes in a 24 hour period.
House water supply is not
connected, valve is not turned
on fully, or valve is clogged.
Connect the refrigerator to a cold water supply
with adequate pressure and turn the water
shutoff valve fully open.
Do not store food items with high water content
in the freezer for a long period of time.
If the problem persists, it may be necessary to
contact a plumber.
Water filter has been
exhausted.
It is recommended that you replace the water
filter:
••
••
••
••
Low house water supply
pressure.
Approximately every six months.
When the water filter indicator turns on.
When the water dispenser output decreases.
When the ice cubes are smaller than normal.
The water pressure must be between 20 and 120
psi on models without a water filter and between
40 and 120 psi on models with a water filter.
If the problem persists, it may be necessary to
contact a plumber or install a booster pump to
compensate for the low pressure.
Reverse Osmosis filtration
system is used.
Reverse osmosis filtration systems can reduce
the water pressure below the minimum amount
and result in icemaker issues.
(Refer to Water Pressure section.)
Tubing connecting refrigerator The tubing can kink when the refrigerator is
to house supply valve is kinked. moved during installation or cleaning resulting
in reduced water flow. Straighten or repair the
water supply line and arrange it to prevent future
kinks.
ENGLISH
Frost or ice
Condensation from food with a
crystals on frozen high water content has frozen
food (inside of
inside of the food package.
sealed package).
Food has been left in the freezer
for a long period of time.
56 TROUBLESHOOTING
Problem
ENGLISH
Icemaker is not
making enough
ice (continued).
Possible Causes
Solutions
Doors are opened often or for
long periods of time.
If the doors of the unit are opened often, ambient
air will warm the refrigerator which will prevent
the unit from maintaining the set temperature.
Lowering the refrigerator temperature can help,
as well as not opening the doors as frequently.
Doors are not closed
completely.
If the doors are not properly closed, ice
production will be affected. See the Doors will
not close completely or pop open section in
Troubleshooting for more information.
The temperature setting for the
freezer is too warm.
The recommended temperature for the freezer
compartment for normal ice production is 0°F. If
the freezer temperature is warmer, ice production
will be affected.
Dispensing water Water filter has been exhausted. It is recommended that you replace the water
slowly.
filter:
••
••
••
••
Reverse osmosis filtration
system is used.
Approximately every six months.
When the water filter indicator turns on.
When the water dispenser output decreases.
When the ice cubes are smaller than normal.
Reverse osmosis filtration systems can reduce
the water pressure below the minimum amount
and result in icemaker issues.
If the problem persists, it may be necessary to
contact a plumber or install a booster pump to
compensate for the low pressure.
Low house water supply
pressure.
The water pressure must be between 20 and 120
psi on models without a water filter and between
40 and 120 psi on models with a water filter.
If the problem persists, it may be necessary to
contact a plumber or install a booster pump to
compensate for the low pressure.
TROUBLESHOOTING 57
Problem
Doors are not closed
completely.
Solutions
Ice will not dispense if any of the refrigerator
doors are left open.
Infrequent use of the dispenser. Infrequent use of the ice dispenser will cause
the cubes to stick together over time, which
will prevent them from properly dispensing.
Check the ice bin for ice cubes clumping/sticking
together. If they are, break up the ice cubes to
allow for proper operation.
The delivery chute is clogged
with frost or ice fragments.
Eliminate the frost or ice fragments by removing
the ice bin and clearing the chute with a plastic
utensil. Dispensing cubed ice can also help
prevent frost or ice fragment buildup.
The dispenser display is locked. Press and hold the Lock button for three seconds
to unlock the control panel and dispenser.
Ice bin is empty.
It may take up to 24 hours for each compartment
to reach the desired temperature and for the
icemaker to begin making ice. Make sure that the
shutoff (arm/sensor) is not obstructed.
Once the ice supply in the bin has been
completely exhausted, it my take up to 90
minutes before additional ice is available, and
approximately 24 hours to completely refill the
bin.
Icemaker is not
making ice.
Refrigerator was recently
installed or icemaker recently
connected.
It may take up to 24 hours for each compartment
to reach the desired temperature and for the
icemaker to begin making ice.
Icemaker not turned on.
Locate the Ice On/Off button and confirm that it is
turned on.
The refrigerator is not connected Connect refrigerator to the water supply and turn
to a water supply or the supply the water shutoff valve fully open.
shutoff valve is not turned on.
Icemaker shutoff (feeler arm)
obstructed.
If your icemaker is equipped with an ice shutoff
arm, make sure that the arm moves freely.
If your icemaker is equipped with the electronic
ice shutoff sensor, make sure that there is a clear
path between the two sensors.
Reverse osmosis water filtration Reverse osmosis filtration systems can reduce
system is connected to your
the water pressure below the minimum amount
cold water supply.
and result in icemaker issues.
(Refer to the Water Pressure section.)
ENGLISH
Not dispensing
ice.
Possible Causes
58 TROUBLESHOOTING
Problem
ENGLISH
Not dispensing
water.
Possible Causes
Solutions
New installation or water line
recently connected.
Dispense 2.5 gallons of water (flush for
approximately 5 minutes) to remove trapped air
and contaminants from the system.
Do not dispense the entire 2.5 gallon amount
continuously. Depress and release the dispenser
pad for cycles of 30 seconds ON and 60 seconds
OFF.
The dispenser panel is locked.
Press and hold the Lock button for three seconds
to unlock the control panel and dispenser.
The dispenser is not set for
water dispensing.
The dispenser can be set for ice or water. Make
certain that the control panel is set for the proper
operation. Press the Water button on the control
panel to dispense water.
Refrigerator or freezer doors are Water will not dispense if any of the refrigerator
not closed properly.
doors are left open.
Water filter has been recently
removed or replaced.
After the water filter is replaced, dispense 2.5
gallons of water (flush for approximately 5
minutes) to remove trapped air and contaminants
from the system. Do not dispense the entire 2.5
gallon amount continuously. Depress and release
the dispenser pad for cycles of 30 seconds ON
and 60 seconds OFF.
Tubing connecting refrigerator
The tubing can kink when the refrigerator is
to house supply valve is kinked. moved during installation or cleaning resulting in
reduced water flow. Straighten or repair the water
supply line and arrange it to prevent future kinks.
The house water supply is not
connected, the valve is not
turned on fully, or the valve is
clogged.
Connect refrigerator to the water supply and turn
the water shutoff valve fully open.
If the problem persists, it may be necessary to
contact a plumber.
TROUBLESHOOTING 59
Possible Causes
Ice has bad taste
or odor.
Water supply contains minerals
such as sulfur.
Solutions
A water filter may need to be installed to
eliminate taste and odor problems.
NOTE: In some cases, a filter may not help. It
may not be possible to remove all minerals / odor
/ taste in all water supplies.
Icemaker was recently installed. Discard the first few batches of ice to avoid
discolored or bad tasting ice.
Ice has been stored for too
long.
Ice that has been stored for too long will shrink,
become cloudy, and may develop a stale taste.
Throw away old ice and make a new supply.
The food has not been stored
Rewrap the food. Odors may migrate to the ice if
properly in either compartment. food is not wrapped properly.
The interior of the refrigerator
needs to be cleaned.
See the Care and Cleaning section for more
information.
The ice storage bin needs to be
cleaned.
Empty and wash the bin (discard old cubes).
Make sure that the bin is completely dry before
reinstalling it.
Dispensing warm Refrigerator was recently
water.
installed.
Allow 24 hours after installation for the water
storage tank to cool completely.
The water dispenser has been
used recently and the storage
tank was exhausted.
Depending on your specific model, the water
storage capacity will range from approximately 20
to 30 oz.
Dispenser has not been used
for several hours.
If the dispenser has not been used for several
hours, the first glass dispensed may be warm.
Discard the first 10 oz.
Refrigerator is connected to the Make sure that the refrigerator is connected to a
hot water supply.
cold water pipe.
WARNING: Connecting the refrigerator to a
hot water line may damage the icemaker.
Water has bad
taste or odor.
Water supply contains minerals
such as sulfur.
A water filter may need to be installed to
eliminate taste and odor problems.
Water filter has been exhausted. It is recommended that you replace the water
filter:
••
••
••
••
Refrigerator was recently
installed.
Approximately every 6 months.
When the water filter indicator turns on.
When the water dispenser output decreases.
When the ice cubes are smaller than normal.
Dispense 2.5 gallons of water (flush for
approximately 5 minutes) to remove trapped
air and contaminants from the system. Do
not dispense the entire 2.5 gallon amount
continuously. Depress and release the dispenser
pad for cycles of 30 seconds ON and 60 seconds
OFF.
ENGLISH
Problem
60 TROUBLESHOOTING
Problem
Possible Causes
Solutions
ENGLISH
Icemaker is
Icemaker shutoff (feeler arm)
making too much obstructed.
ice.
Empty the ice bin. If your icemaker is equipped
with an ice shutoff arm, maker sure that the arm
moves freely. Reinstall the ice bin and wait 24
hours to confirm proper operation.
Clicking
The defrost control will click
when the automatic defrost
cycle begins and ends.
The thermostat control (or
refrigerator control on some
models) will also click when
cycling on and off.
Normal Operation
Rattling
Rattling noises may come from
the flow of refrigerant, the
water line on the back of the
unit, or items stored on top of
or around the refrigerator.
Normal Operation
Refrigerator is not resting solidly Floor is weak or uneven or leveling legs need to
on the floor.
be adjusted. See the Door Alignment section.
Refrigerator with linear
compressor was jarred while
running.
Normal Operation
Evaporator fan motor is
circulating air through the
refrigerator and freezer
compartments.
Normal Operation
Air is being forced over the
condenser by the condenser
fan.
Normal Operation
Gurgling
Refrigerant flowing through the
cooling system.
Normal Operation
Popping
Contraction and expansion of
the inside walls due to changes
in temperature.
Normal Operation
Sizzling
Water dripping on the defrost
heater during a defrost cycle.
Normal Operation
Vibrating
If the side or back of the
To eliminate the noise, make sure that the sides
refrigerator is touching a cabinet and back cannot vibrate against any wall or
or wall, some of the normal
cabinet.
vibrations may make an audible
sound.
Dripping
Water running into the drain pan Normal Operation
during the defrost cycle.
Whooshing
TROUBLESHOOTING
Problem
Solutions
Your refrigerator is designed
Normal Operation
to run more efficiently to keep
your food items at the desired
temperature. The high efficiency
compressor may cause your
new refrigerator to run longer
than your old one, but it is still
more energy efficient than
previous models. While the
refrigerator is running, it is
normal to hear a pulsating or
high-pitched sound.
Doors will not
Food packages are blocking the
close correctly or door open.
pop open.
Ice bin, crisper cover, pans,
shelves, door bins, or baskets
are out of position.
Rearrange food containers to clear the door and
door shelves.
Push bins all the way in and put crisper cover,
pans, shelves and baskets into their correct
positions. See the Using Your Refrigerator section
for more information.
The doors were removed during Remove and replace the doors according to the
product installation and not
Removing and Replacing Refrigerator Handles
properly replaced.
and Doors section.
Refrigerator is not leveled
properly.
Doors are difficult The gaskets are dirty or sticky.
to open.
See Door Alignment in the Refrigeration
Installation section to level refrigerator.
Clean the gaskets and the surfaces that they
touch. Rub a thin coat of appliance polish or
kitchen wax on the gaskets after cleaning.
Door was recently closed.
When you open the door, warmer air enters the
refrigerator. As the warm air cools, it can create
a vacuum. If the door is hard to open, wait one
minute to allow the air pressure to equalize, then
see if it opens more easily.
Refrigerator
wobbles or
seems unstable.
Leveling legs are not adjusted
properly.
Refer to the Leveling and Door Alignment section.
Floor is not level.
It may be necessary to add shims under the
leveling legs or rollers to complete installation.
Lights do not
work.
LED interior lighting failure.
The refrigerator compartment lamp is LED interior
lighting, and service should be performed by a
qualified technician.
Refrigerator has
an unusual odor.
The Air Filter may need to
be set to the MAX setting or
replaced.
Set the Air Filter to the MAX setting. If the odor
does not go away within 24 hours, the filter may
need to be replaced. See the Replacing the Air
Filter section for replacement instructions.
The interior of
the refrigerator
is covered with
dust or soot.
The refrigerator is located near a Make sure that the refrigerator is not located
fire source, such as a fireplace, near a fire source, such as a fireplace, chimney or
chimney or candle.
candle.
ENGLISH
Pulsating or
High-Pitched
Sound
Possible Causes
61
62 WARRANTY
ENGLISH
WARRANTY (USA)
Should your LG Refrigerator (“Product”) fail due to a defect in materials or workmanship under
normal home use, during the warranty period set forth below, LG will at its option repair or replace
the product. This limited warranty is valid only to the original retail purchaser of the product and
applies only when purchased and used within the United States including U.S. Territories. Proof of
original retail purchase is required to obtain warranty service under this limited warranty.
WARRANTY PERIOD
Refrigerator
Sealed System
(Condenser, Dryer, Connecting Tube,
Refrigerant and Evaporator)
Linear Compressor
One (1) year from
the date of original
retail purchase
One (1) year from the Seven (7) years from
date of original retail the date of original
purchase
retail purchase
Ten (10) years from the
date of original retail
purchase
Parts and Labor
(internal/functional
parts only)
Parts and Labor
Part only (Consumer will
be charged for labor)
Parts only (Consumer
will be charged for
labor)
Noises associated with normal operation and failure to follow instructions found in the use and
care and installation guides or operating the unit in an unsuitable environment will not be covered
under this warranty.
Replacement products and parts are warranted for the remaining portion of the original warranty
period or ninety (90) days, whichever is greater.
Replacement products and parts may be new or remanufactured.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED
BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE.
NEITHER THE MANUFACTURER NOR ITS U.S. DISTRIBUTOR SHALL BE LIABLE FOR ANY
INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY
NATURE, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PROFITS, OR ANY
OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. Some states do
not allow the exclusion or limitation of incidental or consequential damages or limitations on how
long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This
warranty gives you specific legal rights and you may also have other rights that vary from state
to state.
WARRANTY 63
THIS LIMITED WARRANTY DOES NOT COVER:
The cost of repair or replacement under these excluded circumstances shall be borne
by the consumer.
For complete warranty details and customer assistance, please call or visit our website:
Call 1-800-243-0000 (24 hours a day, 365 days a year) and select the appropriate option from the
menu, or visit our website at http://www.lg.com Or by mail: LG Customer Information Center:
P. O. Box 240007, 201 James Record Road Huntsville, Alabama 35813 ATTN: CIC
Write your warranty information below: ________________________________________________
Product Registration Information: _____________________________________________________
Model: _____________________________________________________________________________
Serial Number: ______________________________________________________________________
Date of Purchase: ___________________________________________________________________
ENGLISH
1. Service trips to deliver, pick up, install, or repair the product; instruct the customer on operation
of the product; repair or replace fuses or correct wiring or plumbing, or correction of unauthorized
repairs/installation.
2. Failure of product to perform during power failures and interruptions or inadequate electrical service.
3. Damage caused by leaky or broken water pipes, frozen water pipes, restricted drain lines, inadequate
or interrupted water supply or inadequate supply of air.
4. Damage resulting from operating the product in a corrosive atmosphere or contrary to the
instructions outlined in the product owner’s manual.
5. Damage to the product caused by accidents, pests and vermin, lightning, wind, fire, floods, or acts of
God.
6. Damage resulting from misuse, abuse, improper installation, repair, or maintenance. Improper repair
includes use of parts not approved or specified by LG.
7. Damage or failure caused by unauthorized modification or alteration, or if it is used for other than the
intended purpose, or any water leakage where the unit was not properly installed.
8. Damage or failure caused by incorrect electrical current, voltage, or plumbing codes, commercial
or industrial use, or use of accessories, components, or consumable cleaning products that are not
approved by LG.
9. Damage caused by transportation and handling, including scratches, dents, chips, and/or other
damage to the finish of your product, unless such damage results from defects in materials or
workmanship and is reported within one (1) week of delivery (Call: 1-800-243-0000).
10. Damage or missing items to any display, open box, discounted, or refurbished product.
11. Products with original serial numbers that have been removed, altered, or can not be readily
determined. Model and Serial numbers, along with original retail sales receipt, are required for
warranty validation.
12. Increases in utility costs and additional utility expenses.
13. Replacement of light bulbs, filters, or any consumable parts.
14. Repairs when your product is used in other than normal and usual household use (e.g. commercial
use, offices, and recreational facilities) or contrary to the instructions outlined in the product owner’s
manual.
15. Costs associated with removal of your product from your home for repairs.
16. The removal and reinstallation of the product if it is installed in an inaccessible location or is not
installed in accordance with published installation instructions, including LG’s owner’s and installation
manuals.
17. Shelves, door bins, drawers, handles, accessories, and other parts besides those that were originally
included with this particular model.
18. Service trips to your home to teach you how to use the product.
19. Replacement of the water filter cartridge due to water pressure that is outside the specified
operating range or due to excessive sediment in the water supply.
64 WARRANTY
ENGLISH
WARRANTY (Canada)
WARRANTY: Should your LG Refrigerator (“Product”) fail due to a defect in material or workmanship
under normal home use during the warranty period set forth below, LG Canada will at its option
repair or replace the Product upon receipt of proof of original retail purchase. This warranty is valid
only to the original retail purchaser of the product and applies only to a Product distributed in Canada
by LG Canada or an authorized Canadian distributor thereof. The warranty only applies to Products
located and used within Canada.
WARRANTY PERIOD: (Note: If the original date of purchase can not be verified,
the warranty will begin sixty (60) days from the date of manufacture)
Refrigerator/
Freezer
Sealed System
(Condenser, Dryer, Connecting Tube,
Refrigerant and Evaporator)
Linear Compressor
One (1) year from
the date of original
retail purchase
One (1) year from
the date of original
retail purchase
Seven (7) years from
the date of original
retail purchase
Ten (10) years from the
date of original retail
purchase
Parts and Labor
(internal/functional
parts only)
Parts and Labor
Parts only (Consumer
will be charged for
labor)
Part only (Consumer will
be charged for labor)
Noises associated with normal operation and failure to follow instructions found in the use and care
and installation guides or operating the unit in an unsuitable environment will not be covered under
this warranty.
Replacement products and parts are warranted for the remaining portion of the original warranty
period or ninety (90) days, whichever is greater.
Replacement products and parts may be new or remanufactured.
LG Authorized Service Center warranties their repair work for thirty (30) days.
LG CANADA’S SOLE LIABILITY IS LIMITED TO THE WARRANTY SET OUT ABOVE. EXCEPT
AS EXPRESSLY PROVIDED ABOVE, LG CANADA MAKES NO AND HEREBY DISCLAIMS
ALL OTHER WARRANTIES AND CONDITIONS RESPECTING THE PRODUCT, WHETHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR
CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND
NO REPRESENTATIONS SHALL BE BINDING ON LG CANADA. LG CANADA DOES NOT
AUTHORIZE ANY PERSON TO CREATE OR ASSUME FOR IT ANY OTHER WARRANTY
OBLIGATION OR LIABILITY IN CONNECTION WITH THE PRODUCT. TO THE EXTENT THAT
ANY WARRANTY OR CONDITION IS IMPLIED BY LAW, IT IS LIMITED TO THE EXPRESS
WARRANTY PERIOD ABOVE. LG CANADA, THE MANUFACTURER OR DISTRIBUTOR SHALL
NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, DIRECT OR INDIRECT
DAMAGES, LOSS OF GOODWILL, LOST PROFITS, PUNITIVE OR EXEMPLARY DAMAGES
OR ANY OTHER DAMAGE, WHETHER ARISING DIRECTLY OR INDIRECTLY FROM ANY
CONTRACTUAL BREACH, FUNDAMENTAL OR OTHERWISE, OR FROM ANY ACTS OR
OMISSIONS, TORT, OR OTHERWISE. This warranty gives you specific legal rights. You may
have other rights which may vary from province to province depending on applicable provincial
laws. Any term of this warranty that negates or varies any implied condition or warranty under
provincial law is severable where it conflicts with provincial law without affecting the remainder
of this warranty’s terms.
WARRANTY 65
All costs associated with the above excluded circumstances
shall be borne by the consumer.
For complete warranty details and customer assistance, please call or visit our website:
Call 1-888-542-2623 (24 hours a day, 365 days a year) and select the appropriate option from the
menu, or visit our website at http://www.lg.com
Write your warranty information below: __________________________________________________
Product Registration Information: _______________________________________________________
Model: _______________________________________________________________________________
Serial Number: ________________________________________________________________________
Date of Purchase: _____________________________________________________________________
ENGLISH
THIS LIMITED WARRANTY DOES NOT COVER:
1. Service trips to deliver, pick up, or install the product; instructing a customer on operation of
the product; repair or replacement of fuses or correction of wiring or plumbing, or correction of
unauthorized repairs/installation.
2. Failure of the product to perform during power failures and interruptions or inadequate electrical
service.
3. Damage caused by leaky or broken water pipes, frozen water pipes, restricted drain lines, inadequate
or interrupted water supply or inadequate supply of air.
4. Damage resulting from operating the Product in a corrosive atmosphere or contrary to the
instructions outlined in the Product owner’s manual.
5. Damage to the Product caused by accidents, pests and vermin, lightning, wind, fire, floods, or acts of
God.
6. Damage resulting from the misuse, abuse, improper installation, repair, or maintenance of the
Product. Improper repair includes use of parts not approved or specified by LG Canada.
7. Damage or product failure caused by unauthorized modification or alteration, or use for other than its
intended purpose, or resulting from any water leakage due to improper installation.
8. Damage or Product failure caused by incorrect electrical current, voltage, or plumbing codes,
commercial or industrial use, or use of accessories, components, or cleaning products that are not
approved by LG Canada.
9. Damage caused by transportation and handling, including scratches, dents, chips, and/or other
damage to the finish of your product, unless such damage results from defects in materials or
workmanship and is reported within one (1) week of delivery.
10. Damage or missing items to any display, open box, discounted, or refurbished Product.
11. Products with original serial numbers that have been removed, altered, or cannot be readily
determined. Model and Serial numbers, along with original retail sales receipt, are required for
warranty validation.
12. Increases in utility costs and additional utility expenses.
13. Replacement of light bulbs, filters, or any consumable parts.
14. Repairs when your Product is used in other than normal and usual household use (including, without
limitation, commercial use, in offices or recreational facilities) or contrary to the instructions outlined
in the Product owner’s manual.
15. Costs associated with removal of the Product from your home for repairs.
16. The removal and reinstallation of the Product if it is installed in an inaccessible location or is not
installed in accordance with published installation instructions, including the Product owner’s and
installation manuals.
17. Shelves, door bins, drawers, handles, and accessories to the Product. Also excluded are parts
besides those that were originally included with the Product.
18. Service trips to your home to teach you how to use the product.
19. Replacement of the water filter cartridge due to water pressure that is outside the specified
operating range or due to excessive sediment in the water supply.
LG Customer Information Center
For inquiries or comments,
visit www.lg.com or call;
1-800-243-0000
1-888-865-3026
1-888-542-2623
USA, Consumer User
USA, Commercial User
CANADA
Register your product Online!
www.lg.com