Operating instructions Range hood DKS5i DKS6i - V

Operating instructions
DKS5i | DKS6i
Range hood
Thank you for choosing to buy one of our products. Your appliance is made to high
standards and is easy to use. Nevertheless, please take the time to read these operating
instructions in order to familiarise yourself with the appliance and get the best use out of
it.
Please follow the safety precautions.
Modifications
Text, diagrams and data correspond to the technical standard of the appliance at the
time these operating instructions went to press. The right to make technical modifications
for the purpose of the further development of the appliance is reserved.
Validity
The product family (model number) corresponds to the first alphanumerics on the identification plate. These operating instructions apply to:
Type
Product family
Size system
DKS5i
61043
55
DKS6i
61044
60
Variations depending on the model are noted in the text.
© V-ZUG Ltd, CH-6301 Zug, 2018
2
Contents
1
Safety precautions
4
1.1
Symbols used......................................................... 4
1.2
General safety precautions.................................. 4
1.3
Appliance-specific safety precautions ............... 4
1.4
Instructions for use................................................ 5
2
Appliance description
2.1
Introduction ............................................................. 7
2.2
Extraction mode ..................................................... 7
2.3
Recirculation mode with activated charcoal filter
7
2.4
Features................................................................... 7
2.5
Construction ........................................................... 7
2.6
Operating and display elements......................... 8
3
Operating the appliance
3.1
Switching appliance on ........................................ 8
3.2
Setting the power level ......................................... 8
3.3
Switching the illumination on/off......................... 9
3.4
Switching appliance off ........................................ 9
4
Care and maintenance
4.1
Cleaning the housing............................................ 9
4.2
Metal grease filters .............................................. 10
4.3
Standard activated charcoal filter..................... 11
4.4
Replacing the LED light bulbs........................... 12
5
Trouble-shooting
13
6
Accessories and spare parts
14
7
Technical data
14
7.1
Product fiche ........................................................ 15
8
Disposal
16
9
Index
17
11
Service & Support
19
Quick instructions
20
7
8
9
3
1
Safety precautions
1.1
Symbols used
Denotes important safety precautions.
Failure to observe said precautions
can result in injury or in damage to
the appliance or fittings!
Information and precautions that
should be observed.
Information on disposal
Information about the operating instructions
▸ Indicates step-by-step instructions.
– Describes how the appliance reacts
to the steps taken.
▪ Indicates a list.
1.2
General safety precautions
▪ Read the operating instructions before using the appliance for the first time!
▪ This appliance can be used
by children aged 8 and above
and by persons with reduced
physical, sensory or mental
capabilities, or lack of experience and/or knowledge,
provided they are supervised
or have been instructed on
the safe use of the appliance
and have understood the hazards involved. Children shall
not play with the appliance.
4
Cleaning and user maintenance shall not be undertaken
by children without supervision.
▪ If an appliance is not
equipped with a mains cable
and a plug or other means for
disconnecting from the mains
with a contact opening on
each pole complying with the
conditions of overvoltage category III for full isolation, an
isolating device must be incorporated into the permanently installed electrical installation in accordance with the
installation regulations.
▪ If the mains cable of this appliance is damaged, it must
be replaced by the manufacturer or its Customer Services
or a similarly qualified person
in order to avoid hazard.
1.3
Appliance-specific safety
precautions
▪ The room must be adequately
ventilated when operating the
range hood at the same time
as other appliances that burn
gas or other fuels.
▪ Observe the official regulations for the exhaust-air layout.
1 Safety precautions
▪ The extracted air must not be
fed into a chimney which is
used for exhausting fumes
from appliances burning gas
or other fuels.
▪ The minimum distance
between the supporting surface for the cooking equipment on the hob and the lowest part of the range hood
must be observed. If the
range hood is installed above
a gas appliance, this distance
must not be less than 65 cm.
If the installation instructions
for the gas hob stipulate a larger distance, this must be observed.
▪ WARNING: Before replacing
the light bulb, ensure the appliance is switched off and
disconnected from the mains
power supply to avoid possible electric shock.
▪ When replacing a light bulb,
the maximum wattage rating
of replaceable light bulbs
must be visible.
▪ This appliance is intended for
use in the home and similar
settings such as: in staff kitchens in shops, offices and
other commercial establishments; in agricultural establishments; by guests in hotels,
motels and other accommodation establishments; in bed
and breakfast establishments.
▪ Do not operate the appliance
using an external time switch
or a separate remote control
system.
▪ Failure to follow the cleaning
instructions may cause a fire
hazard.
▪ Do not flambé food underneath the range hood.
1.4
Instructions for use
Before using for the first time
▪ The appliance must be installed and
connected to the electricity supply in
accordance with the separate installation instructions. Have a qualified fitter/
electrician carry out the necessary
work.
▪ Observe the official regulations for the
exhaust-air layout.
▪ Dispose of the packaging material in
accordance with local regulations.
Correct use
▪ The appliance is designed for use in
the home for extracting cooking fumes
and smells from above the cooking surface.
▪ Any repairs, modifications or manipulations to the appliance, especially any
electrically live parts, may only be carried out by the manufacturer, its customer service department or similarly
qualified persons. Repairs if carried out
incorrectly may cause serious injury,
damage to the appliance and fittings,
as well as affect the functioning of the
appliance. If the appliance is not working properly or in case a repair is
needed, follow the instructions given in
the 'Service & Support' section. Contact
our Customer Services if necessary.
5
1 Safety precautions
▪ Use original spare parts only.
▪ Retain these operating instructions for
future reference.
Note on use
▪ If the appliance is visibly damaged, do
not use it. Contact our Customer Services.
▪ If the appliance is not functioning properly, disconnect it from the power supply immediately.
▪ Ensure there is adequate ventilation
when the extractor fan is on so as to
avoid creating underpressure in the kitchen and to achieve optimal air extraction.
▪ Avoid a cross-current of air, which
could blow the cooking vapours over
the cooking area.
▪ If other appliances – fired by gas or
other fuels – are being used at the
same time, ensure that there is a sufficient supply of fresh air. This does not
apply to air recirculation appliances.
▪ If other firing systems are being used at
the same time (e.g. wood, gas, oil or
coal fired heating appliances), safe operation is only possible providing a
room negative pressure of 4 Pa
(0.04 mbar) is not exceeded at the location of the appliance. Risk of toxic
fumes! An adequate flow of fresh air
must be guaranteed e.g. via non-closable openings in doors or windows and
in combination with an air-intake/exhaust-air wall box or by other technical
means.
▪ When cleaning the appliance make
sure no water gets inside it. Use a moderately damp cloth only. Do not spray
the inside or outside of the appliance
with water. Do not use a steam cleaner.
If water gets inside the appliance, it can
cause damage.
▪ Accessible parts may become hot when
used with cooking appliances.
6
Caution: Burns hazard!
▪ Do not leave the appliance unattended
when deep-frying on the cooking surface. The cooking oil in the deep-frying
appliance could overheat and catch
fire. Constantly monitor the temperature
of the cooking oil, keeping it below the
temperature at which it can catch fire.
Change the cooking oil regularly – dirty
oil catches fire more easily than clean
oil.
Caution: Risk to life!
▪ Packaging material, e.g. plastic film and
polystyrene, can be dangerous for children and animals. Danger of suffocation! Keep packaging material away
from children and animals.
▪ When carrying out maintenance work
on the appliance, including replacing
light bulbs, cut off the electricity supply
to the appliance: remove the screw fuse
from the holder or switch the circuit
breaker off, or disconnect from the
mains supply.
How to avoid damaging the appliance
▪ Observe the cleaning intervals. Failure
to do so can increase the fire hazard
due to the build-up of grease in the
metal grease filters.
2
Appliance description
2.1
Introduction
The appliance is designed for use in the home for extracting cooking odours from above
a cooking area and can be used in the extraction or recirculation mode.
2.2
Extraction mode
A fan extracts cooking fumes and smells from above the cooking surface. The metal
grease filters clean the extracted air, which is then passed through a connecting pipe fitted with an integrated non-return valve and through the air duct to the outside.
When in use, ensure there is a sufficient supply of fresh air to replace the air that is
being extracted.
2.3
Recirculation mode with activated charcoal filter
A fan extracts cooking fumes and smells from above the cooking surface. The air is
passed through the metal grease filter and activated charcoal filter, grease particles and
odours are largely removed from the air and it is then circulated back into the room.
If activated charcoal filters are not supplied with the appliance, these should be
ordered and installed before using the appliance for the first time.
2.4
Features
▪ 1 hood body is equipped with: extractor fan, LED lighting, operating and display elements, metal grease filters
▪ Installation material
▪ Activated charcoal filter for recirculation mode (not included in the scope of delivery,
available as an accessory)
2.5
Construction
1 Cover flap
2 Illumination
1
3 Metal grease filters
4 Operating and display elements
2
3
4
7
3 Operating the appliance
2.6
Operating and display elements
Power level 3
Power level 2
Power level 1
Switching appliance off
Indicator light: appliance status on/off
Illumination on
Illumination off
Depending on the model and features, the specification of your appliance may differ in individual details from the standard specification described.
3
Operating the appliance
3.1
Switching appliance on
▸ Open the cover flap.
▸ Use the power level switch to set the desired power level.
– The corresponding power level switches
on.
3.2
Setting the power level
▸ Use the power level switch to set the desired power level.
– The corresponding power level switches
on.
8
4 Care and maintenance
3.3
Switching the illumination on/off
▸ Use the illumination switch to switch on/
off.
– The illumination switches on/off.
3.4
Switching appliance off
▸ Close the cover flap or set the switch to O.
– The appliance switches off.
If a power level had been running before closing the cover flap, the appliance
switches back to this power level when the cover flap is opened again.
4
Care and maintenance
4.1
Cleaning the housing
Make sure no water gets inside the appliance. If water gets into the appliance, it
can cause damage.
Do not use abrasive cleaners, scouring pads, steel wool, etc. for cleaning, as they
can damage the surface. Before cleaning the appliance, disconnect the power
supply and switch off the fuse or circuit breaker.
Exterior
▸ Clean using a clean, damp cloth and a mild cleaning agent, then wipe dry.
Interior
Grease and condensate water can build up on the inside around the metal grease filters.
▸ Clean using a clean, damp cloth and a mild cleaning agent, or a soft brush as
needed, then dry well using kitchen towel.
9
4 Care and maintenance
4.2
Metal grease filters
The metal grease filters should be cleaned at least every two months with normal use
(more frequently with intensive use). If properly cared for, the metal grease filters should
provide years of service.
Removing
1
2
3
▸ Open the cover flap
and switch the appliance off.
▸ Push the lock on the metal grease filter
down.
▸ Remove the grease filter down and out of the fixture
.
Cleaning
▸ Clean the grease filters in the dishwasher. Select the «intensive» dishwasher programme with a warm prewash. If no dishwasher is available: Soak the grease filters in
hot water and mild detergent.
▸ Clean, rinse well with clean cold water and then wipe dry.
– Grease filters can be used again after being cleaned.
▸ Put the grease filters back.
Cleaning may cause the metal grease filters to become slightly discoloured. However, this will not affect the functioning of the filters in any way.
10
4 Care and maintenance
4.3
Standard activated charcoal filter
The standard activated charcoal filter needs replacing after an operating period of 3 to 6
months. Standard activated charcoal filters cannot be washed or regenerated.
Removing
1
2
3
2
3
4
▸ Open the cover flap
and switch the appliance off.
▸ Remove the metal grease filters.
▸ Turn the activated charcoal filters by hand
to disengage them from the locking
device and remove from both sides
.
▸ Dispose of spent activated charcoal filters at a suitable recycling point
and replace.
11
4 Care and maintenance
4.4
Replacing the LED light bulbs
Disconnect the power supply and switch off the fuse or circuit breaker.
Removing/Installing
1
2
3
▸ Open the cover flap
and switch the appliance off.
▸ Remove the metal grease filters.
– The light socket is accessible from inside the housing.
▸ Turn the LED light bulbs
and remove. Dispose of the LED light bulbs at a suitable
recycling point
.
▸ Replace the LED light bulbs with new LED light bulbs of the same type (see designation on the light bulb housing or on the identification plate).
12
5 Trouble-shooting
5
Trouble-shooting
This section lists faults that can be solved simply by following the instructions given. If
the fault cannot be remedied, please call Customer Services.
Before calling Customer Services: Please note down the serial number (for FN, see identification plate under «Technical data») and what led to the fault.
Malfunction
Possible cause
Solution
Appliance is not
working.
▪ An interruption in the
power supply.
▸ Check the power supply.
▸ Change fuse.
▸ Reset automatic circuit breaker.
Illumination is not
working.
▪ LED light bulb is defective. ▸ Replace the LED light bulb.
Malfunction
Possible cause
Solution
Appliance is not extracting enough air.
▪ Metal grease filters are
dirty.
▸ Clean metal grease filters.
▪ Recirculation mode only:
Activated charcoal filters
are saturated.
▸ Clean and reactivate or replace
activated charcoal filters.
▪ Extraction mode only: Insufficient fresh air intake.
▸ Ensure fresh air intake is sufficient.
13
6 Accessories and spare parts
6
Accessories and spare parts
Please give product family of the appliance and exact designation of the accessory or
spare part when ordering parts.
LED light bulb (E14)
Metal grease filters
Standard activated charcoal filter
(set of two filters)
7
Technical data
Electrical connection
Accessing the identification plate:
▸ Remove the metal grease filters.
▪ The identification plate is located on the inside of the appliance.
▪ A second identification plate is included in the scope of delivery and should be
retained for the purpose of appliance identification.
14
7 Technical data
7.1
Product fiche
In accordance with EU Regulation No. 65/2014 and No. 66/2014
Description
Brand
Model identifier
Abbreviations
Unit
Value
S
-
V-ZUG LTD
M
-
61043/61044
Annual Energy Consumption
AEChood
kWh/a
60.5
Energy Efficiency Index
EEIhood
%
87.4
Energy Efficiency Class
EEC
-
D
Fluid Dynamic Efficiency
FDEhood
%
9.3
Fluid Dynamic Efficiency Class
FDEC
-
E
Lighting Efficiency
LEhood
lux/W
11.0
Lighting Efficiency Class
LEC
-
E
GFEhood
%
85.8
GFEC
-
B
Air flow at minimum
speed
Qmin
m3/h
249
Air flow at maximum
speed (intensive or boost excluded)
Qmax
m3/h
394
Air flow at intensive
or boost setting
Qboost
m3/h
-
Airborne acoustical A-weighted
Sound Power Emissions at minimum
speed
SPEmin
dBA
53
Airborne acoustical A-weighted
Sound Power Emissions at maximum
speed
SPEmax
dBA
65
Airborne acoustical A-weighted
Sound Power Emissions at intensive
or boost setting
SPEboost
dBA
-
Measured power consumption of off
mode
P0
W
0.0
Measured power consumption of
standby mode
Ps
W
0.0
f
-
1.7
Measured air flow rate at the best efficiency point
QBEP
3
m /h
222.5
Measured air pressure at the best efficiency point
PBEP
PA
137
Measured value of the electric power
input at the best efficiency point
WBEP
W
90.0
Grease Filtering Efficiency
Grease Filtering
Efficiency Class
Time increase factor
15
8 Disposal
Nominal power of the lighting system
Average illumination of the lighting
system on the cooking surface
Sound power level
8
Disposal
8.1
Packaging
WL
W
8.0
Emiddle
lux
90
Lwa
dBA
-
Never allow children to play with packaging material due to the danger of injury or
suffocation. Store the packaging material in a safe location or dispose of it in an
environmentally-friendly way.
8.2
Safety
Render the appliance unusable to prevent accidents caused by improper use (e.g.
through children playing):
▸ Disconnect the appliance from the mains. With a fixed appliance, this is to be carried
out by a qualified electrician. Then cut the mains cable off flush with the appliance.
8.3
Disposal
The «crossed‐out wheeled bin» symbol requires the separate collection of waste
electrical and electronic equipment (WEEE). Such equipment can contain hazardous,
environmentally harmful materials.
▪ These appliances are to be handed over to a designated collection point for the recycling of electrical and electronic equipment and must not be disposed of with unsorted
household waste. And in this way, you will be helping to protect resources and the environment.
▪ For more information, please contact the local authorities.
▪
16
9
Index
A
Accessories ...................................................... 14
Appliance description ........................................ 7
Appliance disposal .......................................... 16
C
Care and maintenance ...................................... 9
Cleaning
Housing ............................................................ 9
Metal grease filters ...................................... 10
Standard activated charcoal filters
........................................................................ 11
Construction......................................................... 7
General ............................................................. 4
Instructions for use......................................... 5
Note on use ..................................................... 6
Service & Support................................... 19
Service agreement........................................... 19
Setting power level ............................................. 8
Spare parts ....................................................... 14
Switching appliance off...................................... 9
Switching appliance on...................................... 8
Symbols ................................................................ 4
T
D
Technical data .................................................. 14
Trouble-shooting .............................................. 13
Type....................................................................... 2
Disposal............................................................. 16
V
E
Validity................................................................... 2
Electrical connection ....................................... 14
Equipment ............................................................ 7
Extraction mode .................................................. 7
I
Identification plate............................................ 14
Illumination ........................................................... 9
Initial set-up .......................................................... 5
M
Model number ..................................................... 2
N
Notes .................................................................. 18
O
Operating and display elements...................... 8
P
Product family...................................................... 2
Product fiche..................................................... 16
Q
Queries .............................................................. 19
R
Recirculation mode ............................................ 7
Replacing light bulb ........................................ 12
S
Safety precautions
Appliance-specific .......................................... 4
Before using for the first time....................... 5
Correct use ...................................................... 5
17
10
18
Notes
11
Service & Support
The «Trouble-shooting» section gives you valuable tips on how to deal with minor
malfunctions yourself, saving you the time and trouble of calling out a service technician and any cost that goes along with it.
Information on the V-ZUG warranty can be found at www.vzug.com →Service
→Warranty information. Please read this information carefully.
Please register your V-ZUG appliance immediately:
▪ online at www.vzug.com →Service →Online warranty registration or
▪ using the enclosed registration card.
This will allow you to take advantage of the best possible support in the event of a fault
in the appliance during the guarantee period. You will require the serial number (FN) and
appliance designation to register your appliance. You will find them on the identification
plate of your appliance.
My appliance information:
FN: ___________________
Appliance: _____________________
Please have this appliance information to hand when contacting V-ZUG. Thank you.
▸ Remove the metal grease filters.
– The identification plate is located on the inside of the appliance.
– A second identification plate is included in the scope of delivery and should be retained for the purpose of appliance identification.
Your repair order
Call the free service number 0800 850 850 to contact your nearest
V-ZUG service centre. You can arrange an onsite visit by us by phone if you wish.
General queries, accessories and service agreement
V-ZUG will be happy to help you with any general administrative or technical queries, to
accept your orders for accessories and spare parts and to inform you about our progressive service agreements. You can contact us by calling Tel. + 41 58 767 67 67 or
by going to our website at www.vzug.com.
19
Quick instructions
Power level 3
Power level 2
Power level 1
Switching appliance off
Indicator light: appliance status on/off
Illumination on
Illumination off
1039484-R01
V-ZUG Ltd, Industriestrasse 66, CH-6301 Zug
Tel. +41 58 767 67 67, Fax +41 58 767 61 61
info@vzug.com, www.vzug.com
Service Centre: Tel. 0800 850 850
Download PDF

advertising