Laboratorybenches andsinks

3
Laboratory benches
and sinks
In our new SCALA laboratory furniture system, laboratory benches have primary importance.
We create flexibility in the laboratory by keeping the
supply and disposal services consistenly self-contained.
Our work benches are equipable with individually
selectable tabletop materials in all models – for a variety
of applications in each area of the laboratory.
Our laboratory benches feature a high level of stability, straightforward design and attractive appearance.
102
In the laboratory, access to water has to meet a variety of needs.
Amply dimensioned sink modules, integrated sinks,
and drip cups, built into service spines or fume hoods, are
integrated into the laboratory environment as needed.
Where flexibility is sought, our mobile units fit the bill
– under the service wings, with suspended service booms,
service modules, and service ceilings – for quick changes
of location in the laboratory.
Laboratory benches
Material/frame combinations
Worktop material
Bench with H-frame
Bench with C-frame
Bench with cantilever frame
Bench with supporting underbench unit
108
108
110
115
116
117
118
Mobile tables
119
Laboratory sinks
Laboratory sink
Laboratory sink with sink module
Drip cup on service spine
Drip cup in worktop
Mobile sink
AquaEl
120
120
121
123
124
125
126
Special tables
Add-on table for low level fume hoods
Balance table Rack Heavy duty rack Swing Height-adjustable table Round table
Sliding element Sekretär
Sliding element Assistent
Sliding element Protector
127
127
128
129
130
131
132
133
134
135
136
Laboratory benches and sinks
3
103
3
Laboratory benches
and sinks
Our benches fit many applications.
We produce our new bench frames out of precision
rectangular stainless steel with reinforced cross-sections.
Thus our benches handle the strain of 41 lbs/ft² (200 kg/m²)
without any problem. The thorougly homogeneous powder
coating, which protects our bench frames from outside
influences, results in a flawless appearance.
The same is true for our work surfaces. You can select
from our wide spectrum of materials according to your
desires.
Bench frames for a variety of needs
You can choose from our C-frame, H-frame and
cantilever frame work benches, to suit your needs and
purposes.
The greatest variety of grid frames available
For optimal implementation in the workplace, we offer a variety of frame widths.
Improved levelling
Our new, flush height-adjustable feet for C-frames
and H-frames provide up to 0.91 in (23 mm) travel
distance – optionally to 1.97 in (50 mm). Easily accessible
and adjustable – for a completely safe status.
For easier cleaning
The new levelling keeps the C-frame approx.
1.18 in (30 mm) over the floor. It is formed in such a way
that cleaning at the floor level is quite easy.
104
H-frames
provide great stability for add-on tables, mobile tables
and analysis tables for seated or standing work.
Underbench cabinets can be mobile, suspended and
laterally adjusted independent of a grid. Knee holes are
therefore possible anywhere.
Movable knee-hole cover panels
In benches without underbench units, we place movable and height-adjustable knee-hole cover panels. Thus,
installations routed below the rear side of the table can
be concealed.
C-frames
are extremely stable and can be loaded with
41 lbs/ft² (200 kg/m²). They provide great knee and leg
room for mobile and suspended underbench units.
Other useful helpers
Add-on tables, swings and round tables are also
combinable to new situations as independent objects –
entirely as needed. Our height-adjustable table can be
positioned from 27.55 (700) to 37.4 in (950 mm).
Cantilever frames
provide the greatest leg room and lightest visual
impact. They are attached to service spines or directly to
walls via their cantilever bracket design.
Our multi-purpose rack
The rack is ideally equipped for fitting equipment,
AquaEl and others. The stable shelves are height-adjustable and the casters enable quick re-positioning.
Laboratory benches and sinks
3
Movable suspended underbench units
Our new guiding rail allows for completely framed
sliding of suspended underbench units with cantilever
frames or C-frames.
105
3
Laboratory benches
and sinks
There are no limits on the use of sinks, sink modules
and cup sinks in the laboratory. In new design, adjusted
to our SCALA laboratory furniture program and manufactured out of chosen materials, our sink elements can
be integrated wherever they are needed. Materials like
stoneware, polypropylene, stainless steel and epoxy resin
are extremely durable.
Sink modules made of stoneware
Our sink modules can be used as end units, but can
also be fitted inline with service spines. The module is
made of high-strength fired, glazed stoneware in widths
of 47.24 in (1200 mm) and is made of one jointless piece.
Our sink modules are mounted supporting plinth units
that can be fitted with drawers, hinged or tilting doors as
desired.
Sink modules and drip cups
Sink modules, made of stoneware or polypropylene,
are integrated in the service spine above the bench levels.
Drip cups are inserted directly into the worktops – made
of stoneware, polypropylene, epoxy resin or stainless
steel.
106
Laboratory sink with built-in basin
As permanently installed parts of the laboratory furninture, sinks are either placed against a service spine or a
wall. Sinks come in various designs, and are combinable
with a wide variety of worktop materials.
Mobile sinks and AquaEl
The mobile sinks are equipped with casters, and they
supplement the flexibility of the laboratory in conjunction with the service wing and the service ceiling. Using
flexible pipes, the connection of the mobile sinks leads
directly to the service wing or the service ceiling system.
The AquaEl is a plug-in compact system that can be used
for straightforward supply and disposal of water from service modules. Here, a pump removes the wastewater over
the respective system.
Laboratory benches and sinks
3
107
Laboratory benches and sinks
3
108
Laboratory benches
Material/frame combinations
Combination of worktop materials and bench frames
Worktop material
Melamine resin
coating
Postformed
Solid grade
laminate
Solid grade laminate
Trespa TopLab+
Polypropylene
H-frame
x
x
x
x
x
C-frame
x
x
x
x
x
Cantilever frame
x
x
x
x
x
Mobile bench frames
x
x
x
x
x
H-frame for low level
fume
–
–
–
–
x 4)
Balance table
x
x
–
–
–
Swing
x 1)
–
–
–
–
Round table
x 1)
–
–
–
–
Rack
x 2)
–
–
–
–
Sliding elements
x 3)
–
–
–
–
1)
Walnut decor or light gray
2)
White shelves, Sekretär boards walnut decor
3)
Only walnut decor
4)
Material with marine edging
Worktop material
Epoxy
Stainless steel
Stoneware
Compound worktop stoneware
Glass
H-frame
x
x
x
x
x
C-frame
x
x
x
x
x
Cantilever frame
x
x
x
x
x
Mobile bench frames
x
x
x
x
x
H-frame for low level
fume
x 1)
x 1)
x 1)
–
–
1)
Material with marine edging
3
Laboratory benches and sinks
Laboratory benches
Material/frame combinations
109
Laboratory benches and sinks
3
Laboratory benches
Worktop material
Melamine resin coating/postforming
Critical substances
Acids in concentrations > 10 %
Damaging substances
Concentrated hydrochloric acids
Nitric acid
Heated sulfuric acid
Advantage
Flat
Disadvantage
Joints sensitive to moisture
Medium chemical resistance
Use
Mobile tables, add-on tables, window benches
Instrument benches and laboratory benches in the dry area
Cannot be used in moist or wet area
Weight [lbs/ft²] (kg/m²)
4 (19.6)
Total thickness [in] (mm)
1.18 (30)
Light gray
NCS S 3005 R80B
Polypropylene
Critical substances
Hydrocarbons
Citric acid
Oxalic acid
Carbon tetrachloride
Diesel oil
Damaging substances
Ozone
Concentrated nitric acid
Chloroform
Gas
Benzol
Advantage
Jointless
Flat
Light
High chemical resistance to acids and many solvents
Easy to dispose of
Less glass breakage
Disadvantage
Soft surface sensitive to scratches
Heat-sensitive
Use
Areas with high chemical resistance
Working with hydrofluoric acid
Radio-isotope area
Areas in which the lack of joints is important
Weight [lbs/ft²] (kg/m²)
4.2 (20.3)
Total thickness [in] (mm)
1.18 (30)
Increased edge [in] (mm)
0.28 (7)
Light gray
NCS S 3005 R80B
110
Solid grade laminate
Critical substances
Acids in concentrations > 10 %
Damaging substances
Concentrated hydrochloric acids
Nitric acid
Heated sulfuric acid
Advantage
Moisture-resistant
Flat
Easy to dispose of
Disadvantage
Reduced coating thickness
Use
Wet rooms
Physical laboratories
Benches with average load
Weight [lbs/ft²] (kg/m²)
Total thickness [in] (mm)
5.4 (26.4)
0.75 (19)
Light gray
NCS S 3005 R80B
Solid grade laminate Trespa TopLab+
Critical substances
Acids in concentrations > 10 %
Damaging substances
Concentrated hydrochloric acids
Nitric acid
Heated sulfuric acid
Advantage
Antibacterial
Highly compressed surface structure
High chemical resistance
Moisture-resistant
Flat
Easy to dispose of
Disadvantage
Reduced coating thickness
Use
Chemical, micro-biological, genetic engineering labatories
Weight [lbs/ft²] (kg/m²)
5.4 (26.4)
Total thickness [in] (mm)
0.75 (19)
Glacier blue
Similar to NCS 1010 R80B
3
Laboratory benches and sinks
Laboratory benches
Worktop material
111
Laboratory benches and sinks
3
Laboratory benches
Worktop material
Epoxy
Critical substances
Various solvents
Diluted acids
Damaging substances
Hydrofluoric acid
Concentrated warm mineral acids
Advantage
Jointless
Flat
Solid panel
High mechanical load capacity
Easy to dispose of
Disadvantage
Surface sensitive to scratches
Sensitive to concentrated acids
Use
Laboratory workstation of all types
Weight [lbs/ft²] (kg/m²)
6.6 (32)
Total thickness [in] (mm)
0.75 (19)
Increased edge [in] (mm)
0.28 (7)
Platinum colored
Similar to NCS S 4202 R
Stainless steel
Critical substances
Cadmium
Lactic acid
Oxalic acid
Damaging substances
Compounds containing chlorine and bromine
Formic acid
Sulfuric acid
Advantage
Jointless
High resistance to solvents
High temperature resistance
Disadvantage
Sensitive to halogens and their compounds
Use
For maximum loads in the area of decontamination and moisture resistance as well as solvent
resistance
Biology
Microbiology
Pharmacy
Radio-isotope area
Pathology
112
Weight [lbs/ft²] (kg/m²)
5.6 (27.5)
Total thickness [in] (mm)
1.18 (30)
Increased edge [in] (mm)
0.28 (7)
Stoneware
Critical substances
None
Damaging substances
Hydrofluoric acid
Advantage
Best chemical resistance
Mechanically stable
Easy to dispose of
Disadvantage
Evenness tolerances due to firing process
Thermodynamic stress limited
Use
Areas with very high chemical and mechanical stress
Weight [lbs/ft²] (kg/m²)
11.5 (56)
Total thickness [in] (mm)
1.02 (26)
Increased edge [in] (mm)
0.28 (7)
Light gray
NCS S 3005 R80B
Compound worktop - stoneware
Critical substances
None
Damaging substances
Hydrofluoric acid
Advantage
Flat
Lighter than stoneware
Best chemical resistance
Easy to dispose of
Disadvantage
Thermodynamic stress limited
Use
Areas with high chemical exposure
Weight [lbs/ft²] (kg/m²)
8.2 (40)
Total thickness [in] (mm)
1.18 (30)
Increased edge (epoxy resin) [in] (mm)
0.28 (7)
White
Similar to NCS S 0300-N
3
Laboratory benches and sinks
Laboratory benches
Worktop material
113
Laboratory benches and sinks
3
114
Service modules
Worktop material
Glass
Critical substances
None
Damaging substances
Hydrofluoric acid
Advantage
Flat
High chemical resistance
Disadvantage
Sensitive to knocks at corners and edges
Use
Laboratory benches of all types subject to large amounts of chemicals
Weight [lbs/ft²] (kg/m²)
7.8 (38)
Total thickness [in] (mm)
1.18 (30)
Light green
NCS S 2010 G10Y
Use
„„Bench
frame with worktops made of various materials as work and storage areas for laboratory work
structure for chemical analysis devices and installations
„„Not to be used for laboratory work that requires the extraction of dangerous substances
„„Supporting
Design
Technical Data
Dimensions
Width [in] (mm)
23.62 (600)
35.43 (900)
47.24 (1200)
Depth [in] (mm)
23.62 (600)
29.53 (750)
35.43 (900)
Working height [in] (mm)
29.53 (750)
35.43 (900)
Load bearing capacity
H-frame [lbs/ft²] (kg/m²)
41 (200)
Relevant features
Height-adjustable feet
Individually adjustable
Material
Bench frame [in] (mm)
Steel section 2.34 (60) / 0.98 (25) / 0.08 (2)
Worktop
See table Material/frame combinations
Height-adjustable feet
Plastic
59.06 (1500)
70.87 (1800)
3
Laboratory benches and sinks
Laboratory benches
Bench with H-frame
115
Laboratory benches and sinks
3
116
Laboratory benches
Bench with C-frame
Use
„„Bench
frame with worktops made of varied materials as work and storage areas for laboratory work
structure for chemical analysis devices and installations
„„Not to be used for laboratory work that requires the extraction of dangerous substances
„„Supporting
Design
Technical Data
Dimensions
Width [in] (mm)
23.62 (600)
35.43 (900)
47.24 (1200)
Depth [in] (mm)
23.62 (600)
29.53 (750)
35.43 (900)
Working height [in] (mm)
29.53 (750)
35.43 (900)
59.06 (1500)
Load bearing capacity
C-Frame [lbs/ft²] (kg/m²)
41 (200)
Relevant features
Design
For suspended and caster-mounted underbench units, easily movable
Height-adjustable feet
Individually adjustable
Material
Bench frame [in] (mm)
Steel section 2.76 (70) / 0.98 (25) / 0.12 (3)
Worktop
See table Material/frame combinations
Height-adjustable feet
Plastic
70.87 (1800)
Use
„„Bench
frame with worktops made of varied materials as work and storage areas for laboratory work
structure for chemical analysis devices and installations
„„For permanent installation on a wall or a wall-mounted service spine
„„Not to be used for laboratory work that requires the extraction of dangerous substances
„„Supporting
Design
Technical Data
Dimensions
Width [in] (mm)
23.62 (600)
35.43 (900)
47.24 (1200)
Depth [in] (mm)
29.53 (750)
35.43 (900)
Working height [in] (mm)
29.53 (750)
35.43 (900)
59.06 (1500)
Load bearing capacity
For wall installation [lbs/ft²] (kg/m²)
41 (200)
Relevant features
Design
For suspended and caster-mounted underbench units, easily movable
Height-adjustable feet
Individually adjustable
Material
Bench frame [in] (mm)
Steel section 2.76 (70) / 0.98 (25) / 0.12 in (3)
Worktop
See table Material/frame combinations
Height-adjustable feet
Plastic
70.87 (1800)
3
Laboratory benches and sinks
Laboratory benches
Bench with cantilever frame
117
Laboratory benches and sinks
3
Laboratory benches
Bench with supporting underbench unit
Use
„„Self-supporting
underbench units on plinth and worktop made of varied materials as work and storage area for
laboratory work
„„Supporting structure for chemical analysis devices and installations
„„Not to be used for laboratory work that requires the extraction of dangerous substances
Design
Technical Data
Dimensions
Total width [in] (mm)
Max. 118.11 (3000)
Width of underbench unit [in] (mm)
17.72 (450)
23.62 (600)
35.43 (900)
47.24 (1200)
Total depth [in] (mm)
29.53 (750)
35.43 (900)
Working height [in] (mm)
29.53 (750)
35.43 (900)
Material
Worktop
See table Material/frame combinations
Load bearing capacity
Table [lbs/ft²] (kg/m²)
118
7.87 (200)
Use
„„Caster-mounted
bench frame with worktops made of varied materials as work and storage areas for laboratory work
supporting structure for chemical analysis devices and installations
„„Not to be used for laboratory work that requires the extraction of dangerous substances
„„Movable
Design
Technical Data
Dimensions
Width [in] (mm)
35.43 (900)
47.24 (1200)
Depth [in] (mm)
23.62 (600)
29.53 (750)
35.43 (900)
Working height [in] (mm)
29.53 (750)
35.43 (900)
Load bearing capacity
Mobile table [lb] (kg)
330 (150)
Each heavy duty caster [lb] (kg)
242 (110)
Relevant features
Heavy-duty casters
4, 2 of which are lockable (lockable casters and steering axle)
Extendable shelf
Optional
Shelf and underbench unit
Optional
59.06 (1500)
3
Laboratory benches and sinks
Mobile tables
Mobile table
Material
Bench frame [in] (mm)
Steel section 2.36 (60) / 0.98 (25) / 0.08 (2)
Worktop
See table Material/frame combinations
119
Laboratory benches and sinks
3
Laboratory sinks
Laboratory sink
Use
„„Water
supply and disposal
cleaning equipment
„„For containing large volumes of water
„„Not to be used for disposal of chemicals
„„For
3
Design
2
1 Underbench unit
2 Sink
3 Fitting
1
Technical Data
Material
Worktop
Material
Sink
Sink dimensions
width x depth x height [in] (mm)
Mode of installation
Stoneware
Stoneware
15.75 (400) x 15.75 (400) x 9.84 (250)
19.69 (500) x 15.75 (400) x 9.84 (250)
Sink fitted flush in the worktop
Melamine resin
coating, laminate,
Trespa Toplab+, glass
Polypropylene
12.6 (320) x 12.6 (320) x 7.87 (200)
15.75 (400) x 15.75 (400) x 9.84 (250)
19.69 (500) x 15.75 (400) x 9.84 (250)
Sink with raised edge inserted into the worktop
from above
Melamine resin
coating, laminate,
Trespa Toplab+, glass
Stainless steel
13.39 (340) x 14.57 (370) x 5.91 (150)
19.69 (500) x 15.75 (400) x 9.84 (250)
Sink with raised edge inserted into the worktop
from above
Polypropylene
Polypropylene
15.16 (385) x 15.16 (385) x 9.84 (250)
19.09 (485) x 15.16 (385) x 9.84 (250)
Sink attached to the worktop from below and
welded
Stainless steel
Stainless steel
15.75 (400) x 15.75 (400) x 9.84 (250)
19.69 (500) x 15.75 (400) x 9.84 (250)
Sinks fitted flush in the worktop
Compound worktop stoneware
Stoneware
14.96 (380) x 14.96 (380) x 9.84 (250)
20.87 (530) x 14.96 (380) x 9.84 (250)
Sink fitted flush in the worktop
Epoxy
Epoxy
15.98 (406) x 12.01 (305) x 7.99 (203)
15.98 (406) x 15.98 (406) x 7.48 (190)
18.7 (475) x 14.96 (380) x 10.98 (279)
Sink fitted flush in the worktop
Dimensions
Width [in] (mm)
23.62 (600)
35.43 (900)
23.62 (600)1)
26.57 (675)1)
27.76 (705)1)
29.53 (750)
32.48 (825)
33.67 (855)
35.43 (900)
Height [in] (mm)
35.43 (900)
1)
If necessary, fitting positioned laterally next to the sink
Sanitary engineering
120
47.24 (1200)
Depth [in] (mm)
Water connection
Fixed connection
Waste water connection
Fixed conneciton with siphon
Water fitting
Optional bench-mounted service valve
Eye wash
Optional
59.06 (1500)
70.87 (1800)
Use
„„Water
supply and disposal
cleaning equipment
„„For containing large volumes of water
„„For installing on specialized underbench units
„„Not to be used for disposal of chemicals
„„For
Design
1
2
3
1 Fitting
2 Sink module
3 Underbench unit (3 parts)
Variants
3
Laboratory benches and sinks
Laboratory sinks
Laboratory sink with sink module
121
Laboratory benches and sinks
3
122
Laboratory sinks
Laboratory sink with sink module
Technical Data
Dimensions
Width [in] (mm)
59.06 (1500)
70.87 (1800)
Depth of wall bench,
in front of of service spine, [in] (mm)
23.62 (600)
26.57 (675) or 32.48 (825)
47.24 (1200)
–
–
Depth of double bench,
in front of service spine, [in] (mm)
27.76 (705) or 33.66 (855)
–
–
Depth of free-standing laboratory bench
[in] (mm)
29.92 (760) or 35.83 (910)
–
–
Depth of front-end sink [in] (mm)
–
29.13 (740)
29.13 (740)
–
front 35.83 (910) / 37.40 (950) rear
Height [in] (mm)
Sink dimensions width x depth x height
[in] (mm)
18.11 (460) x 15.35 (390) x 9.84 (250)
Height of sink edge [in] (mm)
front 0.79 (20) to 1.97 (50) rear
Material
Sink module
Stoneware
Relevant features
Design
Self-supporting, integrally moulded draining area
Marine edging
Modular layout
Various underbench units possible
as front-end sink with specialized underbench unit
Sanitary engineering
Water connection
Fixed connection
Waste water connection
Fixed conneciton with siphon
Water fitting
Bench-mounted fitting optional
Eye wash
Optional
Use
„„Water
supply and disposal
cleaning equipment
„„Drip collector under water fittings for containing small volumes of water
„„Not to be used for disposal of chemicals
„„For
Design
1
2
3
1 Sanitary panel with fitting
2 Drip cup
3 Front filler panel of the service spine
Technical Data
Dimensions
Width [in] (mm)
11.57 (294)
Depth [in] (mm)
5.2 (132)
Height [in] (mm)
4.41 (112)
Sink dimensions width x depth x height
[in] (mm)
10.63 (270) x 3.35 (85) x 3.15 (80)
Material
Sink module
Stoneware
Polypropylene
Relevant features
Design
Attached to the front filler panel of the service spine
3
Laboratory benches and sinks
Laboratory sinks
Drip cup on service spine
Sanitary engineering
Water connection
Fixed connection
Waste water connection
Fixed conneciton with siphon
Water fitting
Optional spine fitting
123
Laboratory benches and sinks
3
Laboratory sinks
Drip cup in worktop
Use
„„Water
supply and disposal
cleaning equipment
„„Drip collector under water fittings for containing small volumes of water
„„Not to be used for disposal of chemicals
„„For
Design
1 Fitting
2 Drip cup
3 Worktop
Technical Data
Dimensions
Width x depth [in] (mm)
11.61 (295) x 5.71 (145)
Height [in] (mm)
4.92 (125)
5.51 (140)
Sink dimensions width x depth x height
[in] (mm)
9.84 (250) x 3.94 (100) x 5.91 (150)
Material drip cup
Material worktop
Stoneware
Stoneware, compound worktop - stoneware
Polypropylene
Polypropylene, melamine resin coating, glass, laminate, Trespa Toplab+
Stainless steel
Stainless steel, melamine resin coating, glass, laminate, Trespa Toplab+
Epoxy
Epoxy
Relevant features
Design
Fastened to the worktop from below or above
Sanitary engineering
124
Water connection
Fixed connection
Waste water connection
Fixed conneciton with siphon
Water fitting
Standard fitting optional
Use
supply and disposal of water and gas
„„For cleaning equipment at any location
„„Not to be used for disposal of chemicals
1
Design
3
4
„„Mobile
1 Connecting pipes
2 Fitting with two cold water
outlets
3 Worktop
4 Sink
5 Underbench unit on casters
5
Technical Data
Dimensions
Width [in] (mm)
23.82 (605)
Depth [in] (mm)
23.62 (600)
Height without fittings [in] (mm)
35.71 (907)
Sink dimensions width x depth x height
[in] (mm)
12.6 (320) x 12.6 (320) x 7.87 (200)
Height of casters [in] (mm)
4.33 (110)
Length of inflow and outflow pipes [in] (mm)
98.43 (2500)
Length of connecting pipes [in] (mm)
98.43 (2500)
Material
Worktop/drip cups
Melamine resin coating/polypropylene
Load capacity
Each caster [lb] (kg)
154.32 (70)
Relevant features
Design
2
Mounted on underbench unit on casters with hinged doors
Attached to the worktop from above
Pipes routed out at the rear of the underbench unit
Drainage pumping system in underbench unit
Disconnection of water intake in case of power outage
3
Laboratory benches and sinks
Laboratory sinks
Mobile sink
Electrical engineering
Electrical power supply [V]
230
Sanitary engineering
Water connection
Flexible with male coupling
Waste water connection
Flexible with male coupling
Gas connection
Optionally flexible with male coupling
Water fitting
Standard fitting
Gas fitting
Optional standard fitting in combination with water fitting
Mixing tap
Optional additional flexible water fitting
125
Laboratory benches and sinks
3
Laboratory sinks
AquaEl
Use
„„Mobile
supply and disposal of water and gas
cleaning equipment at the work station, or at any mobile or stationary laboratory work station
„„Not to be used for disposal of chemicals
„„For
Design
1
2
1
2
3
4
3
4
Connecting pipes
Fitting for water outlet
Housing with pump
Sink
Technical Data
Dimensions
Width x depth x height (without fittings)
[in] (mm)
12.48 (317) x 23.03 (585) x 10.55 (268)
Sink width x depth x height [in] (mm)
10.24 (260) x 10.83 (275) x 4.13 (105)
Length of inflow and outflow pipes [in] (mm)
59.06 (1500)
Length of connecting pipes [in] (mm)
59.06 (1500)
Material
Material
GRP coated
Weight
Weight without fittings [lb] (kg)
30.86 (14)
Relevant features
Design
Ready to plug-in compact system with flexible pipes
Waste water lifting unit integrated into the housing
Disconnection of water intake in case of power outage
Electrical engineering
Electrical power supply [V]
230
Sanitary engineering
126
Water connection
Flexible with male coupling
Waste water connection
Flexible with male coupling
Gas connection
Optionally flexible with male coupling
Water fitting
Standard fitting
Gas fitting
Optional standard fitting in combination with water fitting
Mixing tap
Optional additional flexible water fitting
Use
„„For
installation in low level fume hoods
frame with worktops made of varied materials as work and storage areas for laboratory work
„„Supporting structure for chemical analysis devices and installations
„„Bench
Design
Technical Data
Dimensions
Width [in] (mm)
35.43 (900)
47.24 (1200)
59.06 (1500)
Depth [in] (mm)
23.62 (600)
Working height [in] (mm)
19.69 (500)
Material
Bench frame [in] (mm)
Steel section 2.36 (60) / 0.98 (25) / 0.08 (2)
Worktop
See table Material/frame combinations
Height-adjustable feet
Plastic
Load bearing capacity
H-frame [lbs/ft²] (kg/m²)
41 (200)
Relevant features
Worktop
Marine edging
Height-adjustable feet
Individually adjustable
70.87 (1800)
82.68 (2100)
3
Laboratory benches and sinks
Special tables
Add-on table for low level fume hoods
127
Laboratory benches and sinks
3
Special tables
Balance table
Use
„„For
installing analytical balances and other sensitive measuring devices
frame with worktop and specially positioned vibration-isolated surface
„„Not to be used for laboratory work that requires the extraction of dangerous substances
„„Bench
Design
1
2
1 Concrete worktop
2 Table sheathing
Technical Data
Dimensions
Width [in] (mm)
35.43 (900)
Depth [in] (mm)
29.53 (750)
35.43 (900)
Working height [in] (mm)
29.53 (750)
35.43 (900)
Balance plate width x depth [in] (mm)
15.75 (400) x 17.72 (450)
Material
Supporting construction
Steel section
Worktop
See table Material/frame combinations
Balance plate
Smooth concrete
Weight
Total weight [lb] (kg)
264.55 (120)
Weight of balance plate [lb] (kg)
143.3 (65)
Relevant features
Design
128
Specially mounted, heavy balance plate made of smooth concrete
Supporting construction for the balance plate vibration isolated
Use
„„Mobile,
flexible storage area
with the 23.62 in (600 mm) deep shelf to create a mobile desk/work station
„„Not to be used for storing dangerous substances
„„Combinable
Design
1
2
3
1 Steel support frame with
latticing
2 Depth of bottom storage shelf
17.72 in (450 mm)
3 Depth of bottom storage shelf
23.62 in (600 mm)
4 Heavy-duty casters with brakes
4
Technical Data
Dimensions
Width [in] (mm) with shelf
35.43 (900)
Depth [in] (mm) with shelf
depth 17.55 in (450 mm)
23.62 (600)
Height [in] (mm)
70.47 (1790)
Depth of shelf [in] (mm)
17.72 (450)
23.62 (600)
Material
Supporting construction
Steel section
Shelf 0.87 in (22 mm)
Mounting plate with melamine resin coating
3
Laboratory benches and sinks
Special tables
Rack
Load bearing capacity
Total [lbs/ft²] (kg/m²)
30.7 (150)
Shelf [lbs/ft²] (kg/m²)
6.1 (30)
Relevant features
Heavy-duty casters
4, 2 of which are lockable (lockable casters and steering axle)
Shelf
Adjustable without tools in a grid of 1.78 in (45 mm)
Integrated distribution pillar
Optional
129
Laboratory benches and sinks
3
Special tables
Heavy duty rack
Intended use
„„Mobile
multi-stage storage area
flexible work surfaces for free horizontal configuration
„„Suitable for accommodating stackable and non-stackable measuring instruments / measuring instrument towers
„„Suitable for heavy apparatus
„„With
Design
3
4
2
1 Lower shelf, fixed
2 Height-adjustable shelf, full
width
3 Height-adjustable shelf, depth
23.23 in (590 mm)
4 Steel support frame
5 Heavy duty casters without brake
6 Heavy duty casters with brake
3
1
5
6
Technical data
Dimensions
47.24 (1200)
Width [in] (mm)
70.47 (1790)
Height [in] (mm)
Shelf, width x depth [in] (mm)
70.87 (1800)
30.31 (770)
Depth [in] (mm)
19.68 x 23.23 (500 x 590)
42.20 x 23.23 (1072 x 590)
19.68 x 23.23 (500 x 590)
65.83 x 23.23 (1672 x 590)
Material
Supporting construction
Steel profile 2.76 x 1.57 in (70 x 40 mm)
Shelf
Shelf of OSB board
Load bearing capacity
Total
1102.31 lb (500 kg)
Shelf 19.68 x 23.23 [in] (500 x 590 mm)
66.14 lb (30 kg)
Shelf 42.20 x 23.23 [in] (1072 x 590 mm)
154.32 lb (70 kg)
Shelf 65.83 x 23.23 [in] (1672 x 590 mm)
154.32 lb (70 kg)
Lower shelf 42.20 x 23.23 [in] (1072 x 590 mm)
330.69 lb (150 kg)
Lower shelf 65.83 x 23.23 [in] (1672 x 590 mm)
330.69 lb (150 kg)
Design characteristics
130
Heavy duty casters
4, of which 2 can be locked (caster and steering axle can be locked)
Shelf
Can be adjusted with a grid of 2.95 in (75 mm)
Use
„„Bench
frame with worktops made of varied materials as work and storage areas for laboratory work
structure for chemical analysis devices and installations
„„Visually appealing combination of laboratory tables of various depths
„„Not to be used for laboratory work that requires the extraction of dangerous substances
„„Supporting
Design
Technical Data
Dimensions
Width [in] (mm)
47.24 (1200)
Depth [in] (mm)
59.06 (1500)
23.62 (600) - 29.53 (750)
29.53 (750) - 35.43 (900)
Working height [in] (mm)
29.53 (750)
35.43 (900)
Material
Bench frame [in] (mm)
Steel section 2.36 (60) / 0.98 (25) / 0.08 (2)
Worktop
See table Material/frame combinations
Load bearing capacity
Total [lbs/ft²] (kg/m²)
41 (200)
3
Laboratory benches and sinks
Special tables
Swing
131
Laboratory benches and sinks
3
132
Special tables
Height-adjustable table
Use
„„Bench
frame with worktops made of varied materials as height-adjustable work and storage areas for laboratory
work
„„Supporting structure for chemical analysis devices and installations
„„Not to be used for laboratory work that requires the extraction of dangerous substances
Design
Technical Data
Dimensions
Width [in] (mm)
47.24 (1200)
59.06 (1500)
Depth [in] (mm)
23.62 (600)
29.53 (750)
35.43 (900)
Working height [in] (mm)
27.56 (700) - 37.4 (950)
Material
Bench frame [in] (mm)
Steel section 2.36 (60) / 0.98 (25) / 0.08 (2)
Worktop
See table Material/frame combinations
Load bearing capacity
Total [lbs/ft²] (kg/m²)
41 (200)
Relevant features
Working height
Adjustable in a grid of 0.99 in (25 mm)
Bench frame
H-frame
Use
„„For
„„Not
installation as an additional work surface on tables with H- and C-frames
to be used for laboratory work that requires the extraction of dangerous substances
Design
Technical Data
Dimensions
Diameter [in] (mm)
47.24 (1200)
Working height [in] (mm)
29.53 (750)
35.43 (900)
Material
Bench frame [in] (mm)
Steel section 2.36 (60) / 0.98 (25) / 0.08 (2)
Worktop
See table Material/frame combinations
Height-adjustable feet
Plastic
Load bearing capacity
Round table [lbs/ft²] (kg/m²)
10.2 (50)
3
Laboratory benches and sinks
Special tables
Round table
133
Laboratory benches and sinks
3
134
Special tables
Sliding element Sekretär
Use
„„Movable,
„„Not
slanted writing surface attached to a laboratory work bench
to be used for laboratory work that requires the extraction of dangerous substances
Design
Technical Data
Dimensions
Width [in] (mm)
16.38 (416)
Working height, bench [in] (mm)
35.43 (900)
Max. total height [in] (mm)
48.98 (1244)
Relevant features
Design
Sliding elements on 4 wheels
Fastened to a sliding rail on the laboratory work bench with an adjustable writing pad
Material
Sliding element
Melamin resin coating, walnut decor
Use
„„Movable,
„„Not
installation and writing surface that swings out of a laboratory work bench
to be used for laboratory work that requires the extraction of dangerous substances
Design
Technical Data
Dimensions
Width [in] (mm)
15.98 (406)
Depth [in] (mm)
20.87 (530)
Working height, bench [in] (mm)
35.43 (900)
Load bearing capacity
Storage and writing surface [lb] (kg)
33.07 (15)
Relevant features
Design
Sliding elements on 4 wheels
Fastened to the work bench by means of a sliding rail
Can be folded down completely
Material
Sliding element
Melamin resin coating, walnut decor
3
Laboratory benches and sinks
Special tables
Sliding element Assistent
135
Laboratory benches and sinks
3
136
Special tables
Sliding element Protector
Use
„„Movable
„„Not
splash and splinter guard attached to a laboratory work bench
to be used for laboratory work that requires the extraction of dangerous substances
Design
Technical Data
Dimensions
Width [in] (mm)
15.98 (406)
Working height, bench [in] (mm)
35.43 (900)
Height, splash guard [in] (mm)
70.87 (1800)
Relevant features
Design
Sliding elements on 4 wheels
Fastened to the work bench by means of a sliding rail
Tempered safety glass (toughened glass)
Material
Sliding element
Melamin resin coating, walnut decor
Splash guard
Tempered safety glass (toughened glass)
Laboratory benches and sinks
3
137
Download PDF

advertising