BLUETOOTH ® HEADSET
User Guide
UK ENGLISH
TABLE OF CONTENTS
Welcome
3
What is Bluetooth?
3
Package Contents & Features
4
Charging
5
Pairing
6
Proper Fit
8
Headset Controls
9
Indicators
11
Range
11
Hands-Free Features 12
Multipoint
13
Accessories Available for purchase
14
Troubleshooting
15
Product Specifications
16
Technical Assistance
16
Model & Country Information
16
Limited Warranty
17
Important Safety and Operational Information
17
Regulatory Notices
19
Plantronics Voyager 520
Thank you for choosing the Plantronics Voyager™ 520 headset. To get the
most from your new headset, we recommend that you take the following
steps:
1. Read this User Guide, including all the safety information at the end of this
guide, before you use your headset.
. If you need assistance, please do the following:
•
Follow the steps in the “Troubleshooting” section on page 15.
•
Contact the Plantronics Technical Assistance Center at
www.plantronics.com/support.
. Visit www.plantronics.com/productregistration to register your headset online
so we can provide you with the best possible service and technical support.
NOTE: If you are considering returning the product, please contact the Technical
Assistance Center first.
What is Bluetooth?
Bluetooth wireless technology provides a way for devices to communicate
with each other using short-range radio frequency instead of wires.
Any two Bluetooth devices can communicate as long as they both have
Bluetooth turned on, they are within range and they have been paired--a
quick “handshake” process that connects the two devices.
Bluetooth range is up to 33 feet (10 metres). Obstructions, such as walls
or other electronic devices, can cause interference or shorten the effective
range. For optimal performance, place your headset and phone on the
same side of your body.
Plantronics Voyager 520
UK ENGLISH
Welcome
UK ENGLISH
Package Contents & Features
4
3
2
5
1
6
7
1. Call control button
8
. Wind screen
. Adjustable ear loop
. Ear tip
1
5. Charging jack
6. Noise canceling
microphone
7. AC charger 100 – 240V
8. Desktop charging cradle
Plantronics Voyager 520
Before you use your headset for the first time, charge it for at least 1 hour.
It takes approximately 2 hours to fully charge your headset.
While your headset is charging the indicator glows red. When your
headset is fully charged, the indicator turns off.
There are two ways to charge the headset:
Use the AC charger to connect directly to a
power outlet.
•
Use the desktop charging cradle with the AC
charger.
2
•
1. Turn the charging cradle upside down and
slide off the cover.
1
. Insert the AC charger cable into the charging
cradle.
. Slide the charging cradle cover back into place.
. Plug the AC charger into a power outlet.
5. Insert the headset into the charging cradle.
4
1
2
5
3
Warning: Do not use your headset while it is connected to the charger.
Check the charge level
When you turn on the headset, the indicator flashes red to show the charge level.
Red Flashes
Battery Level
1
Less than 1/3 full
2
1/3 to 2/3 full
3
More than 2/3 full
Plantronics Voyager 520
UK ENGLISH
Charging
UK ENGLISH
Pairing
Pairing is the process of introducing your headset to your phone. Before
using your headset for the first time, you must pair it with your Bluetooth
phone. Normally you only need to pair your headset with your phone
once. To see a demo of the pairing process, visit
www.plantronics.com/EasyToPair.
QuickPair™ Technology
Your new headset includes Plantronics QuickPair technology to simplify
the Bluetooth setup process. The first time you turn your headset on, your
headset automatically enters pairing mode for 10 minutes. Once paired
successfully, your headset stays on for instant use.
If not successfully paired after 10 minutes, your headset automatically
powers off. When you turn the headset on again, it automatically goes
into pairing mode until successfully paired with a Bluetooth phone.
To pair your headset for the first time:
1. Turn ON the Bluetooth feature on your phone.
3
4
2
1
TIP: For most phones, select Settings/Tools > Connections > Bluetooth > On.
See your phone’s user guide for more information.
. Press and hold the call control button to turn on your headset. (The indicator
flashes red/blue to show that the headset is on and in pairing mode.)
TIP: If you don’t see the red/blue flash, press and hold the call control button to
turn your headset off, and then press and hold the call control button again until
you see the red/blue flash.
. Use the commands on your phone to locate your headset.
TIP: For most phones, select Settings/Tools > Connections > Bluetooth >
Search > 520Plantronics. See your phone’s user guide for more information.
. When prompted for the password, enter 0000.
When pairing is successful, the indicator on your headset flashes blue. Your
headset is now connected and ready to use.
Plantronics Voyager 520
UK ENGLISH
Subsequent Pairing
If you’ve already paired your headset with another device, or you have
trouble pairing your headset, follow these steps:
1. Turn ON the Bluetooth feature on your phone.
TIP: For most phones, select Settings/Tools >Connections > Bluetooth >
On. See your phone’s user guide for more information.
. Turn the headset off by pressing and holding the call control button until the
indicator turns red and then turns off.
. Turn the headset back on by pressing and holding the call control button until the
indicator flashes red/blue. The headset is now in pairing mode.
. Use the commands on your phone to locate your headset.
TIP: For most phones, select Settings/Tools > Connections > Bluetooth >
Search > 520Plantronics. See your phone’s user guide for more information.
5. When prompted for the password, enter 0000.
When pairing is successful, the indicator on your headset flashes blue. Your
headset is now connected and ready to use.
Plantronics Voyager 520
UK ENGLISH
Proper Fit
1. Lift the ear loop.
. Swivel the ear loop to the right to wear it on your left ear, or swivel it to the left
to wear it on your right ear.
Right
Left
. Place the ear loop behind your ear.
. Rotate the headset so that the speaker rests comfortably in your ear.
5. Align the microphone with the corner of your mouth.
TIP: Callers can hear you best when you point the microphone towards the corner
of your mouth.
Plantronics Voyager 520
Action
Steps
Turn on the
headset
Press and hold the call control button until the indicator
glows blue. The indicator then flashes red up to three
times to show you the battery charge level.
UK ENGLISH
Headset Controls
See “Check the charge level” on page 5 for details.
Turn off the
headset
Press and hold the call control button until the indicator
glows red. When the power is off, the indicator stays off.
Answer a call
Briefly press the call control button.
Reject a call
Press the call control button for 2 seconds to reject the call.
End a call
Briefly press the call control button.
Make a call
The call automatically transfers to your headset after you
enter the number on your phone and press send.
Adjust volume
Push the call control button up to increase the listening
volume or down to decrease the volume.
See volume warning on page 18.
Transfer a call
from the headset
to the phone
Press and hold the call control button until you hear a
long low tone.
Transfer a call
from the phone
to the headset
Briefly press the call control button.
Plantronics Voyager 520
UK ENGLISH
Tips
•
If you’re wearing the headset, you hear ascending tones when the power turns
on and descending tones when the power turns off.
•
When you receive a call, your phone may ring before your headset rings. Wait
until you hear the ring in your headset before you press the call control button
to answer the call.
•
For best performance, position your phone on the same side of your body as
your headset.
•
To quickly re-connect to your recently used device that is within range, briefly
press the call control button.
•
To cancel an outgoing call, briefly press the call control button.
•
If your phone supports voice dialling see Hands-Free Features on page 14 for
instructions.
10
Plantronics Voyager 520
UK ENGLISH
Indicators
Action
Light
Tone
Charging
Solid red
None
Fully charged
None
None
Low battery
Double red flash every 10 seconds
2 high tones every
30 seconds
Pairing
Flashes red and blue
1 low tone
Paired
Flashes blue
1 low tone
Turning on
Solid blue for 2 seconds
Ascending tones
Standby
Blue flash every 10 seconds
None
Missed call
Flashes purple every 10 seconds
None
Out of range
None
1 high tone
Back in range
1 blue flash
1 low tone
Turning off
Solid red for 4 seconds
Descending tones
Tip: To reset the missed call indicator, press the call control button once.
Range
To maintain a connection, keep your headset within 33 feet (10 metres) of
the Bluetooth device. If there are obstacles between your headset and the
device you may experience interference. For optimal performance, place
your headset and phone on the same side of your body.
As you move out of range, audio quality degrades. When you are far enough
away to lose the connection, you hear a high tone in the headset. The
headset attempts to reconnect after 30 seconds. If you move back in range
later, you can manually reconnect by pressing the call control button.
NOTE: Audio quality is also dependent upon the device with which the
headset is paired.
Plantronics Voyager 520
11
UK ENGLISH
Hands-Free Features
If your phone and your wireless service provider both support hands-free
operation, you can use the following features:
Action
Steps
Redial the last number
you called
Press the call control button twice. You hear a high
tone after each press.
Voice activated dialing
When the headset is on, press and hold the call
control button for about 2 seconds until you hear
1 low tone.
Reject a call
When your headset rings, press and hold the call
control button for about 2 seconds until you hear
1 low tone.
TIP: When you reject a call the caller goes to voice mail.
12
Plantronics Voyager 520
Plantronics Voyager 520 supports multipoint technology, which allows you
to switch between two different Bluetooth audio devices. This enables you
to use one headset between two different phones.
Pair another Bluetooth device
Repeat the pairing steps with the new device. See “Subsequent Pairing”
on page 7 for instructions.
Initiate a call
The headset initiates a call on the device you most recently used. To use
the second phone, initiate the call using the controls on the second phone.
The second phone forms a link with the headset.
Answer a call
An incoming call from either phone rings through to your headset.
•
To answer a call, press the call control button.
Answer a call while talking on the other device
To answer the second call, the first call must be terminated. There is no
function for placing one call on hold while answering another call from
the headset.
•
Press the call control button once to hang up the existing call, and then press
the call control button again to answer the new call from the other phone.
•
Wait for the beep and then answer the second call by pressing the call control
button again.
If you choose not to answer the second call, and you have voice mail on
the second device, the call will go to voice mail.
Plantronics Voyager 520
13
UK ENGLISH
Multipoint
UK ENGLISH
Accessories Available for
purchase
USB charging cable
model # 69519-01
Vehicle power charger
model #69520-01
Vent clip cradle
model #72323-01
To order, please contact your Plantronics supplier or go to
www.plantronics.com.
14
Plantronics Voyager 520
Problem
Solution
My headset does not
work with my phone.
Ensure that the headset is fully charged.
UK ENGLISH
Troubleshooting
Make sure headset is paired with the phone you are
trying to use.
Headset was not in discovery mode when mobile phone
menu selections were made. See “Pairing” on page 6.
Incorrect menu selections were made on your mobile
phone. See “Pairing” on page 6.
Your phone did not
locate the headset.
Turn both your phone and headset off and on, and then
repeat the pairing process on page 6.
I could not enter my
password.
Turn both your phone and headset off and on, and then
repeat the pairing process on page 6.
I cannot hear caller/
dialing tone.
The headset is not turned on. Press the call control button for approximately 2 seconds until you hear a tone or
see the indicator glow blue.
Your headset is out of range. Move the headset closer to
the phone or Bluetooth device.
Your headset battery is drained. Charge your battery. See
“Charging” on page 5.
The listening volume is too low. Push the call control button up to increase the sound you hear in the headset.
Plantronics Voyager 520
15
UK ENGLISH
Product Specifications
Talk time*
battery enables up to 8 hours
Standby time*
battery enables up to 180 hours
Charge time
2 hours for full charge
Range
up to 33 feet (10 metres)
Headset weight
16 grams
Power requirements
Battery type
Lithium ion polymer
Storage/
Usage Temperature
50F–104F (10C – 40C)
Version
Bluetooth 2.0
Bluetooth Profiles:
Headset Profile (HSP) for talking on the phone.
Hands-free Profile (HFP) for talking on the phone
and operating the phone.
* Performance may vary by device. Headset can last up to four days without
charging, based on average talk time of 1.5 hours per day.
Technical Assistance
The Plantronics Technical Assistance Center (TAC) is ready to assist you.
Visit us on the web at www.plantronics.com/support. You can also call the
Technical Assistance Center for accessibility information.
From Australia call: 1800 793 150; from New Zealand call: 00 800 5444 6600.
Model & Country Information
See package for product model number and refer to the table below for
approved use.
16
Plantronics Voyager 520
This warranty covers defects in materials and workmanship of products manufactured,
sold or certified by Plantronics which were purchased and used in the United Kingdom.
The warranty lasts for one year from the date of purchase of the products.
This warranty extends to you only if you are the end user with the original purchase
receipt.
We will, at our discretion, repair or replace the products that do not conform to
the warranty. We may use functionally equivalent reconditioned/refurbished/
remanufactured/pre-owned or new products or parts.
To obtain service contact Plantronics: from Australia call: 1800 793 150 or
1800 428 526; from New Zealand call: 00 800 5444 6600.
THIS IS PLANTRONICS’ COMPLETE WARRANTY FOR THE PRODUCTS.
This warranty gives you specific legal rights and you may also have other rights
depending on your location. Please contact your dealer or our service centre for
the full details of our limited warranty, including items not covered by this limited
warranty.
Important Safety and
Operational Information
Please read the following safety and operational instructions before using
your Bluetooth headset. Keep these instructions for future reference.
When using your Bluetooth headset, these basic safety precautions and
warnings should be followed to reduce the risk of fire, electric shock,
injury to persons and damage to property.
This symbol
identifies and alerts the user to the presence of important
safety warnings.
WARNINGS
•
CHILDREN. Never allow children to play with the product – small parts may be
a choking hazard.
•
Check local laws regarding use of a mobile phone and headset while driving. If
you use the headset while driving, ensure your attention and focus remain on
driving safely.
•
Observe all signs that require an electrical device or RF radio product to be
switched off in designated areas, such as hospitals, blasting areas, potentially
explosive atmospheres and aircraft. On aircraft, obey the airline regulations for
use of wireless equipment.
•
To reduce the risk of electric shock, explosion or fire use only the supplied
charger or Class 2 AC adapter to charge the headset. Ensure that the voltage
rating (e.g. 120v, 60 Hz) corresponds to the power supply you intend to use.
•
Do not disassemble the AC adapter as this may expose you to dangerous
voltages or other risks. Incorrect reassembly can cause electric shock or fire
when the product is subsequently used.
Plantronics Voyager 520
17
UK ENGLISH
Limited Warranty
UK ENGLISH
•
Do not insert anything into the product because this may cause damage to the
internal components or cause injury to you.
•
Avoid contact with liquids. Do not locate this product near water, for example,
near a bath or sink, in a wet cellar or near a swimming pool.
•
Discontinue use of product and contact Plantronics if the product overheats,
has a damaged cord or plug, if the product has been dropped or damaged, or if
the product has come into contact with liquids.
•
Exposure to high volume sound levels may damage your hearing. Although
there is no single volume setting that is appropriate for everyone, you should
always use your headset or headphones with the volume set at moderate
levels and avoid prolonged exposure to high volume sound levels. The louder
the volume, the less time is required before your hearing could be affected.
You may experience different sound levels when using your headset or
headphones with different devices. The device you use and its settings affect
the level of sound you hear. If you experience hearing discomfort, you should
stop listening to the device through your headset or headphones. To protect
your hearing, some hearing experts suggest that stop listening to the device
through your headset or headphones. To protect your hearing, some hearing
experts suggest that you:
1. Set the volume control in a low position before putting the headset or
headphones on your ears.
. Limit the amount of time you use headsets or headphones at high volume.
. Avoid turning up the volume to block out noisy surroundings.
. Turn the volume down if the sound from the headset or headphones
prevents you from hearing people speaking near you. See
www.plantronics.com/healthandsafety for more information on headsets
and hearing.
BATTERY WARNINGS
To reduce the risk of fire or injury to persons, read and follow these
instructions.
•
Charge the headset according to the instructions supplied with the unit.
•
Do not expose the battery to high temperatures.
•
Do not puncture or otherwise damage the battery. The cell contains corrosive
materials which may damage eyes and skin and may be toxic if swallowed.
•
Do not short-circuit the battery, as this may result in a sudden rise in
temperature.
•
Do not incinerate the battery.
•
Never put batteries in mouth. If swallowed, contact your physician or local
poison control center.
•
Dispose or recycle the battery according to local and regional regulatory
requirements.
18
Plantronics Voyager 520
Regulatory Notices
FCC Requirements Part 15
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
. This device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception which can be determined by turning the radio or television
off and on, the user is encouraged to try to correct interference by one or more
of the following measures:
1. Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
. Connect the equipment into an outlet on another circuit.
. Consult the dealer or an experienced radio/TV technician for help.
Exposure To Radio Frequency Radiation
This device and its antenna must not be collocated or operated in
conjunction with any other antenna or transmitter. To comply with FCC
RF exposure requirements, only use supplied antenna. Any unauthorized
modification to the antenna or device could void the user’s authority to
operate this device.
Industry Canada Radio Equipment
The term “IC:” before the radio certification number only signifies
that Industry Canada technical specifications were met. Operation is
subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device. “Privacy
of communications may not be ensured when using this telephone.” This
product meets the applicable Industry Canada technical specifications of
the RSS210.
N10687
Plantronics Inc
345 Encinal Street
Santa Cruz, CA 95060 USA
Tel: (800) 544-4660
Plantronics Pty Ltd.
5 Everage Street
Victoria, 3039 Australia
Tel: 61.3.8371.0050
Fax: 61.3.9326.1620
www.plantronics.com
© 2007 Plantronics, Inc. All rights reserved. Plantronics, the logo design,
Plantronics Voyager, QuickPair and Sound Innovation are trademarks or
registered trademarks of Plantronics, Inc. The Bluetooth® word mark and
logos are owned by the Bluetooth SIG, Inc. and any use of such marks by
Plantronics, Inc. is under licence.
Patents U.S. 5,210,791 and Patents Pending
76502-04 (06-07)