FCC Statements
Moultrie Products
MCG-13036
Panoramic 180i
Instructions for P-Series Digital Game Camera
Moultrie Products
MCG-13269
THANK YOU for your purchase of a P-Series Digital Game Camera. Please read this booklet before using the unit. If you should
have any questions about this product or any other Moultrie product, please contact us using the information on the back of
this booklet. Please register your camera at www.moultriefeeders.com/warranty to activate your warranty.
Panoramic 120i
Note: changes and modifications not expressly approved by the party responsible could void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Infrared LED Flash
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Light Sensor
NOTE: This device complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Camera Lenses
- Reorient or relocate the receiving antenna.
- lncrease the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Motion Sensors
SD Card Slot
LCD Display
Mode Selector Switch
www.moultriefeeders.com
Navigation Buttons
PRADCO Outdoor Brands • 3280 Highway 31, Ste B • Calera, AL 35040
11072017 / MCG-13036 • MCG-13269
Release for
Battery Compartment
External Power Port
Micro USB Port
MOULTRIE P-SERIES
R ES ET
O P T IO N S
R E SE T
O P T I O NS
T. L . P R O G R A M # 2
S T O P T IM E
PHOTO OR
V ID E O
T.L. PROGRAM #2
S T A R T T IM E
MU L TI-SHOT
T.L . PROGRAM #1
STOP TIME
PIR
SENSITIVITY
T.L . PROGRAM # 1
START TIME
Important Battery lnformation
- Only use Alkaline or Lithium batteries. We recommend the use of Energizer batteries.
- Do not mix old and new batteries. Always replace ALL the batteries at the same time.
- When the camera is not in use, please remove the batteries.
DETEC TION
AY
MoultrieDELLimited
Warranty
M OT I ON D E T E C T
M AI N S C R E E N
S T AR T M OT I ON
D E T E C T C AP T UR E
This product has been thoroughly tested and inspected before shipment. It is guaranteed from defects in material and workmanship from the
date of purchase for 2 years. Under this limited guarantee we agree to replace or repair free of charge any part or parts which have been found to
S T AR Tservice,
T I M E call our Customer Service Department. If your problem
T I M E LAPShould
SE
TIMELinAPSE
be defective
original material or workmanship.
you require in-warranty
S E C APproduct
T UR E plus proof of purchase.
M AI
S C Rneed
E E N you to send us yourLAP
INTERVAL
cannot be
addressed over the telephone,
weN may
defective
You must register your camera at www.moultriefeeders.com/warranty to activate your 2-year warranty.
*If Timelapse Program #1 is set to Always On,
settings for Program #2 will be disabled.
*Set options in the respective menus.
Troubleshooting
M OT I ON + T . L.
M AI N S C R E E N
S T AR T M OT I ON +
T . L. C AP T UR E
Please visit www.moultriefeeders.com/contact-us for troubleshooting and helpful tips.
INFOSTRIP
AC TIVE
VIDEO QU AL ITY *
TEMPERATU RE
Returns
( º Fand
OR ºRepairs
C)
I N F OS T R I P
OP T I ON S
D AT E & T I M E
C AM E R A N AM E
Please visit http://www.moultriefeeders.com/return-policy and complete the form or our Service Department will gladly answer any questions
you have. Call 800-653-3334, Monday - Friday, 8:00 AM to 5:00 PM CST.
VIDEO L ENGTH*
P H OT O/ V I D E O
OP T I ON S
MOULTRIE MOBILE® COMPATIBILITY
P H OT O QUALI T Y
P AN OR AM I C P H OT O
Your camera is compatible with our Moultrie Mobile® cellular service when combined with the Field Modem MV1. Please visit www.moultriemobile.com
for more information.
U PGRADE
FIRMW ARE
2
FAC TORY RESET
M E M OR Y
OP T I ON S
E R AS E ALL I M AG E S
M AN AG E D M E M OR Y
SYSTEM
OP T I ON S
P R OG R AM
S E C UR I T Y C OD E
C ON F I R M
S E C UR I T Y C OD E
15
J
MENU MAP
SYSTEM OPTIONS (cont.)
Upgrade Firmware
UPGRADE
The firmware version used by your camera is displayed on the screen.
R ES ET
O P T IO N S
Select Yes - To upgrade version
Select No - To keep current version
PHOTO OR
V ID E O
NOTE: This operation should only be performed when prompted by a technician to do so.
R E SE T
O P T I O NS
K
T. L . P R O G R A M # 2
S T O P T IM E
FIRMWARE
4P180-13090
T.L. PROGRAM #2
S T A R T T IM E
NO
MU L TI-SHOT
PIR
SENSITIVITY
DETEC TION
DEL AY
M OT I ON D E T E C T
M AI N S C R E E N
S T AR T M OT I ON
D E T E C T C AP T UR E
T.L . PROGRAM #1
STOP TIME
T.L . PROGRAM # 1
START TIME
TIMEL APSE
INTERVAL
T I M E LAP S E
M AI N S C R E E N
S T AR T T I M E
LAP S E C AP T UR E
M OT I ON + T . L.
M AI N S C R E E N
S T AR T M OT I ON +
T . L. C AP T UR E
I N F OS T R I P
OP T I ON S
D AT E & T I M E
C AM E R A N AM E
P H OT O/ V I D E O
OP T I ON S
P H OT O QUALI T Y
P AN OR AM I C P H OT O
M E M OR Y
OP T I ON S
E R AS E ALL I M AG E S
M AN AG E D M E M OR Y
SYSTEM
OP T I ON S
P R OG R AM
S E C UR I T Y C OD E
C ON F I R M
S E C UR I T Y C OD E
*If Timelapse Program #1 is set to Always On,
settings for Program #2 will be disabled.
FIELD OF VIEW
*Set options in the respective menus.
Moultrie’s P-Series cameras are known for their wider-than-average field of view. Below you will see a quick comparison between the FOV of the
INFOSTRIP
P-120i and the P-180i.
AC TIVE
P-120i
P-180i
VIDEO QU AL ITY *
TEMPERATU RE
( º F OR º C )
VIDEO L ENGTH*
120º
UNDER
0.5
SECOND
0.4
SECOND
OVER 2X THE COVERAGE
14
U PGRADE
FIRMW ARE
FAC TORY RESET
3
A
CAMERA OVERVIEW (cont.)
MODE SWITCH
Aim - When Aim is ON and the PIR Motion Sensor detects motion, the Status Indicator’s red LED on the front of the camera will come on and
remain lit as long as motion is detected.
Custom Start - Set and run camera with custom settings.
Quick Start - Set and run camera with pre-defined settings.
NAVIGATION BUTTONS
The Menu Button selects Camera Setup or Main Screen. When Camera Setup is selected, the LEFT and RIGHT buttons navigate through the menu
options. The Menu Button is also used to wake-up the camera and turn on the display when the camera is in power saving (or sleep) mode. The
OK button selects the item to be changed. The UP/DOWN and LEFT/RIGHT buttons are used to step through and modify the menu options. Pressing
the OK button again, selects the option indicated on the display. The OK button is also used to manually take a picture.
BATTERY COMPARTMENT
The camera is powered by AA alkaline or lithium batteries – twelve (12) for P-180i, eight (8) for P-120i. Push the battery compartment release
button to eject the battery tray. Install batteries as indicated by the engravings on the battery tray, taking care to note the correct polarity.
See Important Battery Information section on Page 15 of this manual.
SD CARD SLOT
Accepts up to a 32GB SD Card (Class 4 or higher) for photo and video storage. NOTE: A Class 4 or higher SD Card must be installed for the camera to
operate (sold separately). Ultra/Turbo SD cards are not recommended.
J
SYSTEM OPTIONS
Security Code
Select a 5 digit security code for your camera.
NOTE: Please remember your security code. If the code is lost, you can contact
Moultrie customer support to reset the password (charges may apply). Also,
use caution when navigating through the Security Code option as not to set a
code by mistake. For no security code, the setting should remain as “00000”.
Confirm Security Code
Once a security code has been entered, the camera will prompt you to verify the code.
This will keep you from mis-entering a code or seting a code inadvertantly.
Reset to Default settings
You can reset your camera to the factory default settings.
Choose Yes, to restore factory default or No, to keep custom settings.
PROGRAM
SECURITY
CONFIRM
SECURITY
FACTORY
RESET?
CODE00000
CODE00000
NO
USB PORT
Download still pictures and video onto your computer by connecting a Micro-B to USB cable (not included) to the USB port.
EXTERNAL POWER PORT
Accepts the Moultrie power accessories (sold separately) only. Refer to www.moultriefeeders.com for more information.
NOTE: The use of any other power source will void your warranty and possibly harm your camera.
4
13
H
B
SETTING PHOTO/VIDEO OPTIONS (cont.)
Setting Video Length
Choose between 5 video length settings (5, 10, 30, 60 or 90 seconds).
NOTE: Nighttime videos are limited to a maximum of 30 seconds.
VIDEO
Use the steps below as a guide to quickly set up your camera so it will function using the factory default settings.
LENGTH
10
QUICK START INSTRUCTIONS
SECONDS
STEP 1
Open camera cover. Install AA size alkaline or lithium batteries – twelve (12) for P-180i, eight (8) for P-120i – with polarities as indicated in the
battery tray. Insert your SD card. We recommend that you erase the SD card (ERASE IMAGES) inside the camera before taking pictures: this will not
only erase all images, but will also format your SD card for use in the camera. Camera will not operate without SD card. Switch camera to Quick Start.
STEP 2
I
MEMORY OPTIONS
Managed Memory
Selecting the OVERWRITE OLDEST option will cause the oldest files to be overwritten with
new captures when the SD card reaches its capacity. With the DO NOT OVERWRITE option
selected, the camera will cease image capture once the SD card reaches capacity.
Erase Images
Choose Yes, to erase all images or No, to keep stored images.
NOTE: This will also format your SD card for use in your camera.
12
Mount camera in desired location using a mounting strap. The camera also has Python™ Cable
Loops for added security. NOTE: Camera must be attached to a stable object for motion
detection to function properly. Mounting camera on an unstable structure may result in
excess image captures with no subject (false triggers).
Eyelet
STEP 3
MANAGED
DO
NOT
MEMORY
OVERWRITE
Switch camera to Aim mode. Aim camera using motion detection to determine
target area. Walk in front of the camera at the desired distance and the
camera LED will flash showing the covered area.
STEP 4
Close cover. The camera will operate using Default settings. You may also
customize the settings if desired in Custom Start.
ERASE
ALL
IMAGES
NO
Setting Run Mode
When you choose Quick Start, the only settings
that you will be able to change will be Date and
Time. Other settings are:
OPTION
SETTING
Mode
Motion Detect
Detection Delay
30 seconds
Multi-Shot
3-Triggered
Photo or Video
Photo
Python™ Cable
Loops
Mounting
Strap
5
C
CAPTURE MODES
Setting Capture Mode
Use the Up/Down buttons to choose between operating modes. This camera has 3 modes.
1. Motion Detect - Capture photo or video when motion or heat is detected.
2. Time Lapse - Capture photo at periodic intervals based on the Time Lapse program setting.
3. Motion + Time Lapse - Uses a combination of Time Lapse and Motion Detect modes at different times
of the day. Press the Right button to start motion capture.
H
SETTING PHOTO/VIDEO OPTIONS
Setting Photo Quality
Choose between 4 image resolution settings:
1. Enhanced:
2. High:
3. Medium:
4. Low:
PHOTO
QUALITY
HIGH(4MP)
4992 x 2808
4032 x 2268
2688 x 1512
1920 x 1080
NOTE: Options for Motion and Time Lapse can be set in their respective option menus.
D
SETTING MOTION DETECT OPTIONS
IMAGE REVIEW SOFTWARE INSTALLATION
Download your free Image Review software at www.moultriefeeders.com/imagesoftware
For PC users: Installation and operation instructions are available here, as well.
For Mac users: This software is not Mac-compatible. You can import your image files into a program such as iMovie and iPhoto.
Setup Selection Setting
From the Default Screen, pressing the Menu button will enter the current capture mode’s Main Screen. Press the Down button 3 times to enter
GENERAL SETTINGS. Press the Left button to move to the next setting. Using this method you can customize your camera’s feature settings.
From this Main Screen, press OK to get to the Test Capture screen. See pages 1 & 2 for the full layout of the camera menu.
For all menu navigation, use UP/DOWN to change and LEFT/RIGHT to navigate between options and OK to lock-in your selection.
6
Setting Panoramic Photo
Choose between the below options:
YES - camera will take a photo from each lens and combine them into a panoramic image*
NO - camera will take a single photo from the lens that is triggered
PANORAMIC
YES
PHOTO
* Images in Panoramic Mode are only captured in limited resolutions.
NOTE: Panoramic Mode will only be available if Photo/Video Mode is set to Photo.
Setting Video Quality
Choose between 2 image quality settings:
1. HD:
2. Full HD:
1280 x 720
1920 x 1080
VIDEO
QUALITY
HD
(1280X720)
11
G
Event Delay Setting
SETTING INFOSTRIP OPTIONS
Infostrip Active
Choose between:
INFOSTRIP
ACTIVE
PIR Sensitivity
PIR Sensitivity allows you to control as to how much movement and at what distance
the camera will trigger. HIGH sensitivity will allow for more distance, but will make
the camera slightly more susceptible to false triggers and is ideal for open areas such as
fields and food plots. LOW sensitivity will shorten the distance but lower the chance of
false triggers and is ideal for close range traps and deeply wooded areas.
No - To omit information bar.
The temperature is imprinted on each photo and can be in degrees Fahrenheit or Celsius.
IMPORTANT! Patterning animal activity requires setting date and time.
Setting Camera Name
Select an identity for your camera. For example, you can use a name or a location;
the identity you wish to use is up to you.
10
10
DELAY
SECONDS
PIR
SENSITIVITY
HIGH
TEMPERATURE
FAHRENHEIT
Setting Multi-Shot
Setting Date and Time
DETECTION
YES
Yes - To imprint camera name, time, and other information at bottom of image/video.
Note: Remember to input the camera name in the setup and set the clock accordingly.
Temperature
Detection Delay determines the number of minutes between pictures when an
animal is detected and remains in range. Choose between (NONE, 10 sec, 30 sec,
1 min, 5min, 10min, or 30 min).
DATE
&
TIME
CAMERA
NAME
11/11/17
11:11pm
MOULTRIECAM
MULTI-SHOT
Choose how many pictures you would like captured in a sequence
when the camera is triggered (1 or 3).
Available options are:
1 (OFF) - Single photo taken per event.
3 BURST - Three rapidly captured photos taken per event. All 3 photos are captured within one second.
NOTE: Burst mode is only capable of up to 4MP captures, regardless of your resolution setting.
1 (OFF)
3 TRIGGERED - Up to three photos are captured per event with an approximate one second delay between each capture. Each subsequent photo
after the first requires an individual trigger. This allows for multiple potential image captures of the same event while reducing the chance of
empty images if the subject moves out of the field of view after the first shot.
7
Setting Photo or Video
Choose between Photo, Video or Both. “Both” will take a photo, then a video.
Reset Options
Choose between a set of predefined configurations for the motion detect
capture mode to quickly configure your camera for certain levels of performance.
PHOTO
RESET
OR
Setting Program Stop
VIDEO
PHOTO
NOT
RESET
Use to reset your Timelapse options.
#1
RESET
OPTIONS?
DO
NOT
RESET
SETTING TIMELAPSE OPTIONS
Set Frequency of Capture
Choose between 10, 30 seconds / 1, 5, 10, 15, or 30 minutes / 1, 2, 3, 6, 12 hours or 1 day.
TIMELAPSE
INTERVAL
10
SEC
F
Setting Program Start
Choose between 24 different settings: any hour from MlDNlGHT to 11 PM. This will
determine what time the camera will wake up during the program and begin its time
lapse program. Setting to ALWAYS ON will make the camera operate in timelapse
24 hours/day.
8
PROGRAM
STOP10AM
WARNING: If Program #1 is set to Always On, settings for Program #2 will be disabled.
Reset Options
E
T.L.
NOTE: Repeat the above steps for each Program #2 to be set.
OPTIONS?
DO
When start time is set, the camera will automatically move to the Stop option. Set the
Stop time after the Start time you already set. This will set the Start and Stop during
the time lapse photography.
T.L.
PROGRAM
#1
START6AM
SETTING MOTION + TIMELAPSE OPTIONS
Setting Motion + Timelapse Features
The camera operates in Motion Detect Mode and Time Lapse Mode during the programmed intervals.
NOTE: The settings entered for both Timelapse and Motion Detect modes will be used when in this mode. Settings can be made in their
respective menus.
9
Download PDF

advertising