Pro20 Notebook Cart
™
Technical Specifications
55462
Power side
Device side
Use the Pro20 Cart to store, transport, and charge up to 20 notebooks or laptops. An optional current-sensing timer provides
adaptive switching. Padded shelves and flexible dividers protect the notebooks. The overhead wire management aids the wiring integration and allows the charging plugs to hang in front of each laptop. The cart’s compact footprint and handle provide
easy mobility. The Pro20 Cart is made with heavy-gauge steel for security and powder-coated for a durable, long-lasting finish. A dual-bolt lock with hasp on the doors increase security of the notebooks.
Features and Benefits
• Stores, charges, and transports up to 20 of the largest notebooks
(laptops) commonly used in education
• 1.688”W x 17.450”D x 12.344”H storage bay
• Small cart footprint (21”W x 28”D) saves valuable space
• Durable ABS plastic dividers protect notebooks from scratching
(dividers are removable to provide storage space for thicker devices)
• Doors provide easy-access to device and power-side of cart (can be
flipped to be hinged from the left or right)
• Double bolt keyed locks and heavy-gauge steel doors provide security
• Hasp locks provide an additional level of security and the ability to use
your padlocks of choice
(not included), or secure the unit to a wall
• Notebooks and students are separated from all line voltage
• Superior, all-metal overhead cord management system keeps charge
cords organized above each storage bay
Available with:
• PowerProdigy™ timer that senses current from both power units and
distributes power (up to 10A) to the least-charged devices first
(where charging is needed most) *For most power adapters up to 135W
• eLogix™ timer provides cycling power to both power units
(non current-sensing) *For most power adapters up to 90W
• Power switch provides continuous power to both power units
(non current-sensing) *For most power adapters up to 65W
• Two 14-outlet, (125V~/12A, 60Hz) universal power units work with
both inline, and wall adapters
• External power switch provides easy-access for safe power connection
/ disconnection
• Two auxiliary outlets (always on) for teacher laptop, WiFi access point,
or other accessory (1 external, 1 internal)
• Large, removable QuickBrick™ wiring trays with retaining straps for
charge adapters allow wiring to be completed outside the cart at the
comfort of a workstation or desk to provide quick and easy integration
revised 7/19/17
• Ventilated doors and side panels keep notebooks and chargers cool,
preventing overheating, and extending device life
• Replaceable, IEC quick-release 8’ nominal 14 AWG, 3-wire power
cord and external cord wrap brackets provide easy power access
• Four inboard locking casters provide easy rolling, and quiet transport
(5” balloon wheel, 4” balloon wheel options available)
• One all steel handle provides control and maneuverability
• Worksurface and base panel 3mm vinyl edging protects walls and furniture
• Cart ships fully-assembled with handle for quick, simple integration
and deployment
• Durable powder coated steel chassis provides a long-lasting finish
• Scratch and impact-resistant high-pressure laminate top provides a
durable, useful worksurface for instructors
• ETL recognized (certified to UL 60950-1) in the US and Canada for the
cart and electrical system
• Warranted to be free of all defects in materials and workmanship for
10 years, electrical system 2 years
• Designed and assembled in Chippewa Falls, WI, USA
This cart is designed to hold up to 20 notebooks or laptops.
55462-AAD - with 4” Balloon Wheels, PowerProdigy™ timer
55462-ABD - with 5” Balloon Wheels, PowerProdigy™ timer
55462-AAB - with 4” Balloon Wheels, Power switch
55462-ABB - with 5” Balloon Wheels, Power switch
55462-AAL - with 4” Balloon Wheels, eLogix™ timer
55462-ABL - with 5” Balloon Wheels, eLogix™ timer
Color Options
Laminate:
White Fiesta
Metal:
Warm Gray
Page 1 of 10
Construction
• The worksurface and base panel is constructed from 1” NAF (No Added Formaldehyde) composite board
with .030” high-pressure laminate on one face, and a balancing phenolic backer on the opposing face
• Worksurface and base panel edges are covered with 3mm vinyl edgeband
• 16-gauge side panels, shelves, and doors
• All metal components are finished with a scratch-resistant powder coat epoxy
• This cart is factory-assembled, packaged, and shipped on its own skid
Specifications
Capacity
20 Notebooks or Laptops
Storage bays (nominal)
1.688”W [4.29 cm] x 17.450”D [44.32 cm] x 12.344”H [31.36 cm]
Electrical
• (2) 14-outlet power units (outlets rotated 90°)
• 125V~/12A, 60Hz
• 15-amp breaker
• Locking power-side door isolates and separates
electrical line voltage from students
• ETL recognized (certified to 60950-1)
Charging options
(See p.4 for specs)
Wheels
5” Balloon Wheels - Weight capacity 300 lb [136 kg] each
4” Balloon Wheels (total locking) - Weight capacity 250 lb [114 kg] each
Certifications / Compliance
• ETL recognized
• SCS Indoor Advantage Certified
Unit weight (nominal)
146 lb [66.3 kg]
Shipping weight (nominal)
178 lb [80.8 kg]
• Meets or exceeds applicable ANSI-BIFMA test standards
Specifications subject to change without notice
D
H
W
Double-bolt lock with padlock
hasp (on both doors)
(padlocks not included)
Devices must be placed in the bays with the charge
plug on one of the two exposed edges shown.
revised 7/19/17
Page 2 of 10
Casters
ORDER CODE A = 4” Balloon Wheel
ORDER CODE B = 5” Balloon Wheel
Electrical Options
Pro20™ Electrical comparison
PowerProdigy
Timer
™
eLogix
Timer
™
Power
Switch
ü
External auxiliary outlet
ü
ü
ü
Internal auxiliary outlet
ü
ü
ü
External on/off switch
ü
Load-sensing technology
ü
2 bank
ü
ü
ü
*For most power adapters up to 90W
ü
ü
ü
ü
ü
revised 7/19/17
4 bank
*For most power adapters up to 135W
ü
ü
*For most power adapters up to 65W
ü
ETL certified to 60950-1
*Total maximum wattage will be affected by actual charge adapter
wattage and number of charge adapters per cart. See more wattage /
adapter information on p.4.
LED lights indicate charging status
Page 3 of 10
PowerProdigy™ Timer (D)
e
id
al s
n
ter
Ex
LE
t
utle
A
Int
X
AU t
le
t
C
u
IE O
t
Inle
D
C
A
Use with higher amp-draw devices. On the Pro20, the PowerProdigy™
Timer can be used with most power adapters up to 135W.
• Four green LED lights indicate
• Smart charging senses current
and distributes power to the
charging activity status of each
power units requiring it most
power unit
• Four timed power unit-dedicated • Two auxiliary outlets (1 external,
1 internal)
outlets (labeled A, B, C, D)
controlled by logic board
• ETL recognized (certified to 60950-1)
e
sid
al
ern
B
rs
we
Po
ts
ligh
D
o
UX
ch
wit
ts
utle
O
Input:
Breaker:
Cycling interval:
Cycling outlets:
Auxiliary outlets:
Power Cord:
Power switch:
125V~/12A, 60Hz
15A, 250 VAC
15 minutes
4 timed (A, B, C, D) up to 10A
1A each (controlled by main power switch)
IEC quick-release (replaceable)
8’ nominal, 14 AWG, 3-wire
15A (externally accessible)
eLogix™ Timer (L)
ide
s
nal
r
xte
E
er
w
Po
sw
LE
s
nal
r
Inte
A
A
B
s
t
tle
The eLogix™ timer charges one half of the devices for 15 minutes, then
charges the second half of the devices for another 15 minutes. This
cycling occurs automatically and is not adjustable. On the Pro20, the
eLogix™ timer can be used with most power adapters up to 90W.
• Two timed power-unit dedicated outlets (labeled A, B)
(up to 10A power output)
• Two green LED lights indicate charging activity status
• One auxiliary outlet (external)
• ETL recognized (certified to 60950-1)
ts
igh
Dl
ide
itch
X
AU t
e
l
C
t
IE Ou
B nlet
I
Input:
Breaker:
Cycling interval:
Cycling outlets:
Auxiliary outlet:
Power Cord:
Power switch:
125V~/12A, 60Hz
15A, 250 VAC
15 minutes
4 timed (A, B) up to 10A
1A (controlled by main power switch)
IEC quick-release (replaceable)
8’ nominal, 14 AWG, 3-wire
15A (externally accessible)
Ou
Power Switch (B)
de
l si
na
ter
Ex
t
ese
itch
sw
er
w
Po
R
tlet
u
XO
AU
ide
al s
rn
Inte
B
A
revised 7/19/17
C
t
e
l s
X
AU t
e
l
C
t
IE Ou
D nlet
I
The Power Switch provides continuous power to all power units.
Use with lower amp-draw devices. On the Pro20, the Power Switch
can be used with most power adapters up to 65W.
• Four continuous power-unit dedicated outlets (labeled A, B, C, D)
• Two auxiliary outlets (1 external, 1 internal)
• ETL recognized (certified to 60950-1)
Input:
Breaker:
Outlets:
Auxiliary outlets:
Power Cord:
Power switch:
125V~/12A, 60Hz
15A, 250 VAC
4 timed (A, B, C, D) up to 10A
1A each (controlled by main power switch)
IEC quick-release (replaceable)
8’ nominal, 14 AWG, 3-wire
15A (externally accessible)
t
Ou
Page 4 of 10
External power switch,
LED indicators, and
AUX outlet
revised 7/19/17
Pro20 Notebook Cart
(Shown with 5” balloon wheels)
Page 5 of 10
Section view A-A
Power side
Device side
Inline adapter
and cord storage
Notebook / laptop
QuickBrick™
removable tray
14-outlet
power units
Inline adapter
and cord storage
Notebook / laptop
QuickBrick™
removable tray
14-outlet
power units
revised 7/19/17
Page 6 of 10
Device side view
(shown without door)
1.688
[4.28 cm]
Overhead cord
management
Overhead cord
management
revised 7/19/17
Page 7 of 10
Power-side wiring diagram
(shown without door)
To timer
QuickBrick™ removable tray
8’ nominal [1m] 14 AWG,
3-wire IEC power cord
(to wall outlet)
14-outlet power unit
QuickBrick™ removable tray
Cord wrap
59” nominal [1.5m] 14 AWG,
3-wire IEC power cord on
each lower power unit (to
PowerProdigy™ timer)
revised 7/19/17
14-outlet power unit
Page 8 of 10
Note: Cart includes two QuickBrick™ removable trays with
a hook and loop retaining strap for charge adapters for fast
and easy wiring for quick deployment and cord storage.
QuickBrick™ removable tray
loaded with inline adapters in
vertical position
QuickBrick™ removable tray
loaded with inline adapters in
horizontal position
Accessories
A
.3125” [7.9 mm]
B
1” [25.4 mm]
C
.983” [25 mm]
D
2.07” [52.5 mm]
E
.987” [25.1 mm]
Reprogrammable 4-digit Combination Lock - 95536
•
•
•
•
•
Set your own 4-digit personalized combination (up to 10,000 options)
5/16” hardened steel shackle for cut-resistance
Black powdercoated die-cast body for durability
Change key included
Unit weight: .55 lb [.25 kg]
revised 7/19/17
Hook-and-loop Strap Kit - 95004
Slot labels for Pro20 - 55478
(16) .75” [1.91 cm] x 12” [30.48 cm],
and (32) .75” [1.91 cm] x 5” [12.7 cm]
• Black numbers on transparent
adhesive backer
• 1-10 label, 11-20 label
See spectrumfurniture.com for the latest
accessories and detailed warranty information.
Page 9 of 10
Warranty
WE WILL MAKE IT RIGHT FOR YOU!
Spectrum is committed to provide complete customer satisfaction. Each of our products is manufactured from the best materials available and each
product is stringently monitored throughout the production process through our P.A.C.E. program (Product Assurance to meet Customer Expectations).
We expressly warrant that Spectrum products will be of good quality and workmanship and free from defect for the period set out in the warranty table below
from the date of delivery. This warranty shall not apply to defects or damage resulting from misuse, abuse, neglect, improper care, modification or repair not
authorized by Spectrum, or any other cause outside the control of Spectrum. Spectrum will, at its sole option, either repair or replace the defective product.
This warranty is exclusive; no other warranty, written or oral, is expressed or implied. This warranty is given by Spectrum to Buyer and to no other person or legal entity. No Spectrum dealer, distributor, agent or employee is authorized to make any modification or addition to this warranty.
NOTWITHSTANDING ANYTHING TO THE CONTRARY, SPECTRUM WILL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR INDIRECT OR LIQUIDATED DAMAGES, INCLUDING CONSEQUENTIAL, INCIDENTAL AND SPECIAL DAMAGES. IN NO EVENT SHALL SPECTRUM’S LIABILITY, WHETHER
UNDER CONTRACT OR WARRANTY, IN TORT OR OTHERWISE, EXCEED THE PURCHASE PRICE RECEIVED BY SPECTRUM FOR THE PRODUCT AT
ISSUE AND “RECALL ACTION” EXPENSES. SPECTRUM SHALL NOT BE SUBJECT TO ANY OTHER OBLIGATIONS OR LIABILITIES, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORIES OF LAW, WITH
RESPECT TO PRODUCTS SOLD OR SERVICES RENDERED BY SPECTRUM, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATING THERETO.
Our Customer Service Department is ready to provide immediate attention to any questions, comments or concerns. They are available to answer your calls
Monday through Friday from 7 am to 5 pm CST. In addition your product comments or concerns are welcome via e-mail at: spectrum@spectrumfurniture.com.
Warranty Table
Item
Adjustable Crank / Electric Desk Legs
Flat Panel Desk Gas Cylinders
Chairs
• Adjustable Height Chair Parts – including frames, gas
cylinders, wood and plastic parts, control handles, casters
• Adjustable Height Chair Upholstery
• In-Stock Upholstery
• Graded-In Fabrics and Customer Owned Material
Height Adjustable Columns and Lifts
General Use Casters
Warranty Period
effective 1/1/2015
• 1 Year
• 7 Years
• 2 Years
• 2 Years
• No Warranty
• 1 Year
Electrical (including timers and LINAK actuators)
• 2 Years
Keyboard / Mouse Trays
• 1 Year
Flat Panel Monitor Arms
• Flat Panel Monitor Arm – General Parts
• Flat Panel Monitor Arm – Gas Cylinders
• 5 Years
• 2 Years
Desks and Lecterns
• Computer Desk Chassis
• Cart Chassis
• Lectern Chassis
• 10 Years
DESIGNED AND ASSEMBLED IN
CHIPPEWA FALLS
WISCONSIN.USA
925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM
revised 7/19/17
© 2017 Spectrum Industries Inc., All rights reserved.
Page 10 of 10
Download PDF
Similar pages
Cart
Easily manage all your Chromebooks in one
Conceptronic CZSHB16B
Pro32™ NotebookCart - 2016
Wireless User Guide – Windows XP
Pro32™ NotebookCart - Spectrum Industries
Conceptronic Notebook Sleeve 18"