TLC130
Time Lapse Camera
User Manual
1. Install Brinno App on Smartphone
http://www.brinno.com/tlc130#app
!
Smartphone OS:
Android 4.4, iOS 8.0 or later.
Camera Wi-Fi and BLE
SSID# is required when
connecting the camera
to smartphone. The
information is on a sticker
inside the device package.
SSID:
TLC130-XXXXXX
1
2. Camera Parts
1
1. Power/ Step Video Recording Button
2
2. Time Lapse Recording Button
3. Memory Card Cover
3
3-1. Micro SD Card Slot
3-2. Camera Reset Button
4
3-3. USB-C Socket
5
4. Lens
5. LED Status Indicator*¹
6. Tripod Mount (size: 1/4”)
3-1
3-2
3-3
6
2
*¹ LED Status Indicator:
• Power/ Memory Card Status
- Power on: Green light turns on.
- Battery Low: Red light flashes slowly.
- Micro SD Card Not Inserted: Red light flashes.
- Micro SD Card Full or Error: Red light flashes with
buzzer alert.
• Recording Status
- Time Lapse Recording:
Orange light flashes in every 3 secs.
- Step Video Recording:
Green light flashes in every 2 secs.
• Charging Status
- Charging: Solid red light
- Fully Charged: Solid green light
3
3. Charge Camera Battery
1. Insert Micro SD card.
!
Micro SD/ Micro SDHC/
Micro SDXC card (Up to 64GB)
2. Fully charge the battery.
• First time charging requires 3 hours.
• LED indicator:
Red: Battery charging
Green: Battery fully charged.
DC IN,
5V 500MA
4
4. Operation Button
Power on and off
1. Power ON:
Hold “POWER” button for
5 secs. The green LED light
turns on and the buzzer emits
one long beep.
5 secs
2. Power OFF:
Hold “POWER” button for
3 secs. The green LED light
turns off and the buzzer emits
one long beep.
3 secs
5
Time Lapse Recording
1. Press “Time Lapse Recording”
button to trigger recording
(short beeps *3). The orange
LED light starts flashing one
time in every 3secs.
2. Hold “Time Lapse Recording”
button for 3 secs to stop
recording (short beeps *3).
Step Video Recording
1. Press “Step Video Recording”
button to trigger recording
(short beeps *4). The green
LED light starts flashing one
time in every 2 secs.
2. Hold “Step Video Recording”
button for 3 secs to stop
recording short beeps *4).
6
5. Two-step Connection
1. Control and operation:
through Bluetooth connection
(Remains connected).
!
2. Preview and download videos:
through Wi-Fi connection
(Disconnected during
recording).
6. Brinno App
Open App to connect
Bluetooth before access
Wi-Fi connection
(Details in Section 7).
1
1. CAMERA: Connect your
smartphone to Brinno camera.
2. EDIT: Edit single video clip.
2
3. Brinno: Brinno website.
4. App Settings
4-1. Change language.
4
3
7
7. Connect to Smartphone
Connect to Android Phone
1. Power on camera (Hold “POWER”
button for 5 secs, green LED light
turns on).
2. Turn on Bluetooth and Wi-Fi on
smartphone.
1
2
3
4
3. Open Brinno App.
CAMERA
4. Press “CAMERA” button.
5. Select the camera’s SSID:
TLC130-XXXXXX
6. Press “CONNECT”.
7. After Bluetooth is connected.
Preview screen shows
“Connecting Wi-Fi?” message.
Press “OK” to proceed to
connect camera Wi-Fi.
8
5
6
7
8. Select “AP Mode”, press “SCAN”.
Smartphone is auto connecting
to camera Wi-Fi.
8
9. Once Wi-Fi is connected, you see
PREVIEW screen in the app.
9
9
Connect to iPhone
8
Steps 1~7 are same as “Connect
to Android Phone”.
8. Select “AP Mode”, press
“CONNECT”.
9
9. Follow connection guide to
connect Wi-Fi:
Go to Settings > Wi-Fi> select:
TLC130-XXXXXX -> Password:
12345678.
10. Once Wi-Fi is connected, go
back to Brinno App, press “OK”.
11. You see PREVIEW screen in ]
the app.
10
10
11
8. Record Time Lapse Video
1. When camera is successfully
connected to smartphone.
1
2. Press “SCENE” button.
3. Select a capture scene.
2
4. Press “<” button to confirm and
go back to PREVIEW screen.
3
i
Recommend for first time user:
Choose “Scenery” scene, place
your camera on a location and
record any subject for 15 mins
to experience the time lapse
shooting effect.
11
5. Press “SHUTTER” button to record.
5
6. When camera is recording, the
screen shows a flashing “REC”
icon. Exit app.
7. Press “SHUTTER” button to stop
recording.
7
12
i
Camera offers 3 capture modes:
Photo, Time Lapse, Step Video
i
When camera is recording, Wi-Fi
is automatically turned off to save
power.
9. Record Step Video
1. When camera is successfully
connected to smartphone.
1
2. Press “STEP VIDEO” button.
3. Select video burst length and
capture interval.
4. Press “<” button to confirm and
go back to PREVIEW screen.
3
3s
5 mins
2
STEP VIDEO
<
4
13
5. Press “SHUTTER” button to record.
6. When camera is recording, the
screen shows a flashing “REC”
icon. Exit app.
7. Press “SHUTTER” button to stop
recording.
5
6
7
14
10. Replay Videos (Reconnect to Your Smartphone)
For power saving purpose, camera
disconnects Wi-Fi when recording.
To re-enable camera preview or
replay time lapse video, you MUST
RECONNECT TO camera’s Wi-Fi
after you are done with recording.
1
2
1. Press “SETTING” button at
PREVIEW screen.
2. Select “Wi-Fi Connection”.
3. Press “OK” to connect Wi-Fi.
3
15
4. Reconnect camera Wi-Fi to see
image in the PREVIEW screen.
(Details in Section 7).
5. When camera is successfully
connected to a smartphone,
select “FILE” icon.
6. Select a video at View Movie
screen.
7. Press “PLAY” button to replay
video.
8. Press “<” button to return to
View Movie screen.
i
16
Save videos to smartphone before
editing or sharing. (Refer to next
section).
4
5
<
6
7
11. Save Videos to Smartphone
1. When camera is successfully
connected to smartphone.
2. Press “FILE” button.
1
3. Press “SELECT” button.
4. Select videos.
2
5. Press “TRANSFER”.
3
<
4
i
It takes longer when multiple video
files are transferred at one time.
5
17
6. For iPhone users: Press “OK” to
allow Brinno App to access to
your photos.
7. Do not leave or exit App while
videos are transferring.
8. When file transmission is done,
you can replay or edit it in App.
6
7
Transmission in Progress
TLC0001.AVI
0%
CANCEL
18
12. Edit Videos
1. At App home page, press “EDIT”
button.
2. Press “SELECT” button.
3. Select one video.
4. Press “+” button to go to editing
page.
i
The App supports one video
editing at one time.
1
2
<
3
4
19
Editing Page:
<
1. TRIM: Trim your video
(see page 21).
2. TEXT: Add text to video
3. SPEED: Change video
playback speed.
4. MUSIC: Add music to video
(see page 22).
5. REVERSE: Reverse video clip and
save frames from last to first.
6. SIGNATURE: Add signature at
the end of video.
7. SHARE: Upload your video to
social media for sharing. Or save
it to camera roll. (see page 22).
20
1
2
3
4
7
5
6
TRIM:
<
1. Move the 2 sliders to get your
desired video clip.
2. Select “OK” to confirm.
1
2
21
MUSIC:
1. Select “Add Music”.
2. My Music: Select music from your phone.
3. Featured Music: Select music from Brinno App.
1
2 My Music
3 Featured Music
SHARE:
When editing is done, upload
your video to social media for
sharing. Or save it to camera roll.
22
App Interface: Preview Screen
Home Screen
Camera Setting
Wi-Fi Connection
Status
Battery Status
Time Stamp On
Storage Status
Scene
(Time Lapse Mode)
File (In-Camera)
SCENERY
Capture Mode
Photo
Time Lapse
Step Video
23
Camera Settings
Custom Image: Saturation / Contrast / Sharpness
Image Quality: Best / Better / Good
Resolution: Full HD / HD
Time Stamp: ON / OFF
LED Indicator: ON / OFF
Advanced Settings:
Band Filter
50 Hz / 60 Hz / None
Firmware Version
Firmware Upgrade
SD Card Format
Live View Scene Effect
Apply custom image and scene setting effect in real time, it will delay
Live View image transfer.
Reset
Reset camera to default settings.
24
For more information,
please visit Brinno website:
QR code
www.brinno.com
Please use the link below to download the latest user manual.
www.brinno.com/support
The product features, specifications sheets and instructions
may differ from actual products. Please refer to Brinno
official site for the latest version of user manual.
25
FCC
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT.
This equipment has been tested and found to comply with the limit s for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
26
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for
an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20 centimeters between the radiator and your body.
BSMI 有電池產品
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
警告
本電池如果更換不正確會有爆炸的危險,請依製造商說明書處理使用過之
電池。
NCC LP0002
低功率電波輻射性電機管理辦法
第十二條
經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不
得擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾
現象時,應改善至無干擾時方得繼續使用。前項合法通信,指依電信法規
定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫
療用電波輻射性電機設備之干擾。
27
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
auxappareils radio exempts de licence.L’exploitation est autorisée aux deux
conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit
accepter tout brouillage adioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.
RF Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC
établies pour un environnement non contrôlé. Cet équipement doit être installé
et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement
et votre corps.
28
EN_A1 HTLCQIG00003
Download PDF

advertising