PresentacioEng_SELECTA MASTER

page 3 to 4
page 5
Automatic NaOH dosage and temporized stop.
Steam distillation unit kjeldahl “Pro-Nitro S”
page 6
Steam distillation unit kjeldahl “Pro-Nitro A”
page 7 to 8
Extractor for fats and oils “Det-Gras N”
Extractor for determination of cellulose and fibre
Alcohol disitillation
“DQO” and “DBO” water analysis
Flocculator and water distiller
page
page
page
page
page
Automatic boracic and Naoh dosage, sample drainage and
temporized stop.
Fully automatic operation. From reagent dosage to the titration
®
9
10
11 to 12
13 to 14
15 to 17
Distributed worldwide by Globe Scientific Inc.
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
NUTRITIONAL AND WATER ANALYSIS APPARATUS
Kjeldahl digestion unit
Steam distillation unit kjeldahl “Pro-Nitro M”
NUTRITIONAL AND WATER ANALYSIS APPARATUS
EXTRACTION
WATER ANALYSIS
Organic nitrogen determination by Kjeldahl “BLOC-DIGEST”
Steam distillation of protein, PRO-NITRO “M”
Steam distillation of protein semiautomatic, PRO-NITRO “S”
Kjeldahl distillation automatic PRO-NITRO “A”
Extractor for the determination of cellulose and fibre, “DOSI-FIBER”
Cold extraction unit, “EF-1425”
Solvent extractor unit for the determination of residues, oils and fats
in nutritional and other materials DET-GRAS “N”
Sample Hydrolysis unit, “HI-1427”
Wine (Alcohol), distillation unit “DE 1626”
Chemical Oxygen Demand in residual water “C.O.D.”
Constant temperature refrigerated incubator cabinets, B.O.D. “MEDILOW
S, M, L , LG”
Flocculator for water analysis, laboratory “FLOCUMATIC”
Flocculator for water analysis, portable “JARTEST”
De-mineraliser “LAB-ION”
Water Distillation unit , “AQUASEL”, “L-3” and “AC-L8”
RECOMMENDED METHODS AND EQUIPMENT: PRO-NITRO M, S and A, DOSI-FIBER, EF-1425, HI-1427, DET-GRAS N, BLOC-DIGEST, DE-1626 and C.O.D.*
ANALYSIS OF CEREAL AND DERIVATIVES
Reference
Pro-Nitro M,S and A
Dosi-Fiber
EF-1425
Determination index for cellulose
Method Wladesco
YES
YES
Insoluble fibre in food
Method Van Soest
YES
YES
YES
YES
Crude Fibre
Method Weende & Wijkströn
Det-Gras N
Proteins
Method Kjeldahl
Soxhlet extraction for fat identification
Soxhlet Extraction
YES
Crude Fat
Soxhlet Extraction
YES
Bloc-Digest
YES
YES
Arsenic
Determination A. A.
YES
Mercury
Determination A. A.
YES
ANALYSIS OF MILK AND DERIVATIVES
Reference
Crude Fat
Pro-Nitro M,S and A
Dosi-Fiber
EF-1425
Det-Gras N
Soxhlet Extraction
Crude Protein
YES
Method Kjeldahl
Casein
YES
Method Kjeldahl through precipitation of casein
YES
Reference
DE-1626
Method Volumetric
YES
Volatile Acid
Method Volumetric
YES
Iron
Method Volumetric
ANALYSIS OF ALCOHOLIC BEVERAGES
Degree of alcohol
Reference
ANALYSIS OF FODDER AND RAW MATERIAS
Raw Cellulose
Pro-Nitro M,S and A
Raw Protein
Method Kjeldahl
Raw Fat
Soxhlet estraction
Volatile base nitrates
Distillation Kjeldahl
YES
Method Kjeldahl
YES
Casein total
Method Kjeldahl in casein precipitate
YES
Phosphorus
Method Photometric
Hydrocyanic Acid
Distillation in Silver Nitrate
Pure zolidine
YES
YES
Dosi-Fiber
EF-1425
Det-Gras N
Dosi-Fiber
EF-1425
YES
YES
Det-Gras N
YES
YES
YES
YES
YES
YES
Reference
Pro-Nitro M,S and A
Total Nitrogen
Method Kjeldahl
YES
Volatile Acids
Distillation measurement
Arsenic
Dichromate Determination
ANALYS I S O F WATE R S
Total Nitrogen
Total Phosphorus
Bloc-Digest
YES
Soxhlet Extraction
ANALYSIS OF FRUIT BEVERAGES AND DERIVATIVES
Bloc-Digest
YES
Method Weende & Wijkströn
Soluble Raw Fat en hydrochloric acid and Pipsin
Bloc-Digest
Dosi-Fiber
DE-1626
Bloc-Digest
YES
YES
YES
Reference
Pro-Nitro M,S and A
Method Kjeldahl
YES
Dosi-Fiber
D.Q.O./ECO-8/ECO16
Bloc-Digest
YES
Method Photometric
C.O.D.
Determination by Dichromate
YES
YES
* Reference: Methods are official publications issued by the MAPA (Ministry of Agriculture, Fisheries and Nutrition) 1993.
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
2
Dry block for Determination of Organic Nitrogen by
the Kjeldahl method
Models Macro and Micro
THE EQUIPMENT FOR THE DETERMINATION OF ORGANIC NITROGEN IS MADE OF TWO BASIC ELEMENTS:
- BLOCK DIGESTER (MINERALISATION) WITH PROGRAMMABLE TEMPERATURE CONTROL AND GLASSWARE
(MACRO 250 ml AND MICRO 100 ml).
- DISTILLATION UNIT “PRO-NITRO M”, “PRO-NITRO S” (SEMIAUTOMATIC) AND “PRO-NITRO A” (AUTOMATIC).
Digestion Block “Bloc-digest”
FEATURES
Minimal sample manipulation
Uniform heating.
Capacity to store 20 programs of 4 steps for temperature and time.
RS-232 port for temperature register and digestion programation from a PC.
Gas collection system that does not require special water jet pumps.
Supplied complete with:
1 metal heater block.
1 programmer for time and temperature
1 tube support rack
1 gas collector
Digestion tubes.
Complete unit with: Dry-block connected to a programmable process
unit, (time and temperature) rack support for tubes
and fume extractor.
MODELS - COMPLETE UNIT MICRO
MODELS - COMPLETE UNIT MACRO
MACRO
Bloc Digest 6
Bloc Digest 12
Bloc Digest 20
Part No.
No. of positions
4000629
4000630
4000631
6
12
20
M I CRO
Bloc Digest m 12
Bloc Digest m 24
Bloc Digest m 40
ACCESSORIES: EXTRACTION SYSTEM AND NEUTRALIZATION OF ACID VAPOURS
Part No.
No. of positions
4001047
4001048
4001049
12
24
40
Reduces water consumption, no requirement for a
constant connection for mains water.
Prevents emission of gas vapours and acidic water to
waste.
Low noise level (<65dBA)
Re circulating pump made from chemically resistant
materials
“Scrubber” unit
Part No.
Digestion block.
“Scrubber”
Re-circulating vacuum pump.
Specially designed to absorb and neutralize vapours generated in the Kjedahl digestion processes.
Composed of a “Scrubber unit” that blocks the passage and neutralizes the condensed acids, and a re-circulating water pump that produces sufficient vacuum to aspirate the vapours.
It is essential to put the “ Scrubber” unit together with the neutralizer solution between the digestion block and the re-circulating pump. Digester
“Bloc Digest 20” requires 2 “Scrubber” units for a proper neutralization of
fumes. Note: Pump with part number 4001612 has 2 suction inlets.
Height / Width / Depth
(exterior) cm
Weight
Kg
4001611
32 31 16
2
It is supplied with 3 Kg. acid vapours neutralizer solution.
Spare part:
3 Kg. acid vapours neutralizer solution.
Part No. 4001610
Water recirculation vacuum pump
Part No.
4001612
Height / Width / Depth
(exterior) cm
Vacuum level
bar
Pump rate
Litres/minute
Weight
Kg
44 39 28
0.98
10
10
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
3
PARTS LIST AND ACCESSORIES
Heating blocks
To function correctly it is important to include in the purchase
the controller unit for time and temperature RAT-2, The block
should not be connected directly to the mains supply.
Models
MACRO
MACRO
MACRO
MICRO
MICRO
MICRO
Part No.
No. of
positions
4000507
4000508
4000509
4001050
4001051
4001052
Ø tube
mm
6
12
20
12
24
40
Height / Width / Depth
(exterior) cm
42
42
42
26
26
26
18
18
18
18
18
18
33
39
44
33
39
44
28
33
39
28
33
39
Temperature
°C
Power
W
Weight
Kg
45 to 450
45 to 450
45 to 450
45 to 450
45 to 450
45 to 450
1500
2100
2500
1500
2100
2500
18
25
31
16
22
27
Process programmer for time / temperature RAT-2.
Part No. 4001538
Features
Temperature range from 45 ºC to 450 ºC.
Memory for 20-4 steps programs.
Maximum time per step: 600 minutes.
Acoustic indication for digestion end of program.
Two selectable temperature gradients: kjeldahl/D.Q.O.
Temperature sense breakage alarm.
Independent control of safety maximum temperature.
Bidirectional RS-232 serial connection. For temperature registration and digestion program edition with
the RAT connected to a PC.
Software included.
Electronic controller RAT-2
Control Panel
The control panel and the RAT-2 display allow the creation and execution of the digestion program.
During the digestion, it shows the block temperature,
the elapsed time in the program step.
Tube support rack.
Made of chemically treated no corrosive Dural, with handles and side panel that prevents heat loss.
Models
Part No.
MACRO
MACRO
MACRO
MICRO
MICRO
MICRO
4005071
4005081
4005091
4001053
4001054
4001055
Fume extraction
Unit for collecting fumes supplied with a support rack. Made
of borosilcate glass and stainless steel.
No. of
places
6
12
20
12
24
40
Digestion and distillation tube Series
MACRO of 250 ml volume. Graduated to
100 ml 42 mm Ø x 300 mm high.
Part No. 4042300
The software included makes easier the digestion program edition
and the digester temperature register.
Height / Width / Depth
(exterior) cm
15
15
15
15
15
15
17.5
23
28.5
17.5
23
28.5
12.5
18
23.5
12.5
18
23.5
Tube for digestion and distillation
Series MICRO of 100 ml volume.
26 mm Ø x 300 mm high.
Part No. 4001045
Models
MACRO
MACRO
MACRO
MICRO
MICRO
MICRO
Part No.
No. of
places
4005072
4005082
4005092
4001056
4001057
4001058
6
12
20
12
24
40
Water jet pump for vacuum extraction. Made of PVC designed for the fume
extraction of the 20 and 40 place models.
Part No. 4000633
Height / Width / Depth
(exterior) cm
15
15
15
15
15
15
18
23
29
18
23
29
12
18
23
12
18
23
Water Jet pump for vacuum extraction. Metallic, suitable for the extraction
of fumes for the 6, 12 and 24 place models. Part No. 7000293
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
4
Steam distillation unit Kjeldahl “Pro-Nitro M”
DETERMINATION OF ORGANIC NITROGEN (KJELDAHL METHOD).
AUTOMATIC NaOH DOSAGE AND TEMPORIZE STOP.
Steam distillation Kjeldahl unit.
Simple secure systematic analysis suitable for small to Medium throughput of
samples.
FEATURES
Steam distillation system.
Compact steam generator with safety over temperature thermostat and over pressure device.
Safety door, the system will not operate if the door is open.
“Tube in place” sensor: if the tube is not located, the dosing process of NaOH will not
take place.
Universal adapter for digestion/distillation tubes MACRO (Ø 42 mm) and MICRO
(Ø 26mm)
Small footprint, saves bench top space: The H2O and NaOH reservoirs are placed within the unit.
Stainless steel case with reinforced ABS plastic front.
Automatic distillate titration kit. (See accessories).
SPECIFICATIONS
Measuring range: from 0.2 to 200 mg of Kjeldahl Nitrogen.
Programmable distillation time.
Nitrogen recovery >99.5%
Distillation speed: from 35-40ml/minute
Typical distillation time: from 7-10 minutes.
Water consumption rate: from 80-100 litres/Hr.
Steam generator water consumption: 2,5 Litres/ Hr.
Water reservoir for steam generator: 6 litres
NaOH reservoir: 2 Litres.
ALARMS
Low water level for the steam generator.
Safety door open or no distillation/digestion tube in place.
Steam generator over temperature.
1
2
3
4
5
6
AUTOMATED SEQUENCES
Open and closure of cooling water to the cooling coil.
Automatic load of NaOH once the distillation has started.
Select NaOH volume.
Stop at the end of the pre-set programmed time.
ADDITIONAL REQUIREMENTS
To complete Kjeldahl Nitrogen analysis a digestion block is also required.
(See Bloc Digest pages 251 and 252).
MODEL
Part No.
Height / Width / Depth
cm
Power
W
Weight
Kg
4002627
75 50 50
1800
30
Supplied with a MACRO Ø 42mm tube, set of reagent containers and tubing.
ACCESSORIES
Tube for digestion and distillation Series MICRO
of 100 ml volume.
Part No. 4001045
Digestion and distillation tube Series MACRO of
250 ml volume.
Part No. 4042300
CONTROL PANEL
1. Low water indicator.
2. Door open or no tube presence indicator.
3. Over temperature indicator.
4. Mains on indicator.
5. Push button and indicator start/stop distillation.
6. NaOH volume selection.
Adapter kit for automatic determinations. Vessel with
location positions for pH electrode, stirrer and reagents and distillate sample.
Part No. 4001724
Polycarbonate conical flasks
durable. CAPACITY 250 ml
Part No. 5310100 with cap.
Part No. 5310101 without cap.
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
5
Steam distillation unit Kjeldahl Semi-Automatic “Pro-Nitro S”
DETERMINATION OF ORGANIC NITROGEN (KJELDAHL METHOD).
AUTOMATIC BORACIC AND NaOH DOSAGE, SAMPLE DRAINAGE AND TEMPORIZED STOP.
Semi-automatic steam distillation Kjeldahl unit. Simple secure systematic analysis
suitable for medium to large throughput of samples.
FEATURES
Steam distillation system. Compact steam generator with safety over temperature
thermostat and over pressure device. Safety door, the system will not operate if the
door is open.
“Tube in place” sensor: if the tube is not located, the dosing process of NaOH will not
take place.
Universal adapter for digestion/distillation tubes MACRO (Ø 42mm) and MICRO (Ø 26 mm).
Small footprint, saves bench top space: The H2O, NaOH and H3BO3 reservoirs are
placed within the unit.
Empty Digestion/Distillation tube system.
Stainless steel case with reinforced ABS plastic front.
Green LED 2 digit display.
Distillation program: (Add NaOH, Add Boric Acid, Distillation time, Empty tube.)
Automatic distillate titration kit. (See accessories).
SPECIFICATIONS
Measuring range: from 0.2 to 200 mg Nitrogen.
Programmable distillation time.
Nitrogen recovery >99.5%
Distillation speed : from 35-40ml/minute
Typical distillation time: from 7-10 minutes.
Water consumption rate: from 80-100 litres/Hr.
Steam generator water consumption: 2.5 Litres/ Hr.
Water reservoir for steam generator: 6 litres
NaOH reservoir: 2 Litres.
Boric Acid reservoir: 2 Litres
ALARMS
Low water level for the steam generator.
Safety door open or no distillation/digestion tube in place.
Steam generator over temperature.
1
AUTOMATIC
Single push button to start the distillation cycle:
- Boric acid dosing
- Start distillation.
- NaOH dosing
- Stop Distillation (Programmed time transpired.)
- Acoustic indicator at the end of the cycle.
ADDITIONAL REQUIREMENTS
To complete Kjeldahl Nitrogen analysis a digestion block is also required.
(See Bloc Digest pages 251and 252).
MODEL
Part No.
Height / Width / Depth
cm
Power
W
Weight
Kg
2
3
4
5
CONTROL PANEL
1. Illuminated indicator. Steam
generator
2. Low water in the steam
generator
3. Door open or no tube present
indicator.
4. Over temperature indicator.
5. Push button and display to
select parameters.
6 7 8 9 10
6. Mode push button, Manual
or Automatic.
7. Push button, dose Boric Acid/Push button START in automatic mode.
8. Dose NaOH push button.
9. Push button, start the distillation in manual mode.
10.Push Button, empty sample tube.
4002851 75 50 50
1800
32
Supplied complete with a MACRO Ø 42 mm tube, set of connection tubes, set of reservoirs.
ACCESSORIES
Tube for digestion and distillation Series MICRO
of 100 ml volume.
Part No. 4001045
Digestion and distillation tube Series MACRO of
250 ml volume.
Part No. 4042300
Adapter kit for automatic determinations. Vessel with
location positions for pH electrode, stirrer and reagents and distillate sample.
Part No. 4001724
Polycarbonate conical flasks
durable. CAPACITY 250 ml
Part No. 5310100 with cap.
Part No. 5310101 without cap.
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
6
Automatic steam distillation unit Kjeldahl
“Pro-Nitro A”
DETERMINATION OF ORGANIC NITROGEN (KJELDAHL METHOD)
FULLY AUTOMATIC OPERATION. FROM THE REAGENT DOSAGE TO THE TITRATION.
Steam distillation system Kjeldahl, complete with automated “ON-LINE” analysis
(evaluation in real time). For systematic precise analysis, with minimum personnel
intervention, simple and safe. Adequate for a laboratory with a medium to large
throughput of samples.
The Kjeldahl steam distillation unit «PRO-NITRO A» evaluates the distillate at the same time as it is produced ( evaluation «On-Line»), the evaluation and distillation are
completed as one operation, reducing drastically the analysis time. This type of evaluation offers the following additional advantages: detects the point where the sample no longer produces Nitrogen, which means that, the distillation stops at the optimum maximum Nitrogen recovery and does not prolong the analysis longer than
necessary.
The titration is a colorimetric method and is accepted by AOAC and does not require
any periodic calibration.
FEATURES
Distillation by steam generation.
Automatic «On-line» colorimetric evaluation.
Steam generator with safety thermostat, over temperature and over pressure device.
Safety, door closed, that prevents distillation if open.
Detects that a digestion/distillation tube is present. This prevents the dosing of NaOH
if there is no tube located.
Universal adapter for MACRO (Ø 42 mm) and MICRO (Ø 26 mm)distillation tubes.
Space saving in the laboratory: the reservoirs for the H2O, NaOH, Boric Acid and
HCl are located inside the unit.
Empties the digestion/distillation tubes and the collector automatically.
Automatic stop when distillation is complete.
Large LCD display of 20 x 4 characters.
RS232 output to results printer.
Main system made from stainless steel with an ABS plastic front.
SPECIFICATIONS
Measuring range: 0.2 to 200 mg Nitrogen.
Nitrogen recovery:> 99.5%
Distillation speed: from 35 to 45 ml/minute
Coolant water consumption: 80 to 100 litres per hour.
Steam generator water consumption: 2.5 Litre/Hr.
Steam generator water reservoir capacity: 6 litres.
NaOH reservoir capacity: 2 Litres.
Boric Acid reservoir capacity: 2 Litres.
Titrant reagent reservoir capacity: 2 Litres.
Evaluation precision: 1.5%
Minimum reagent dose 0.01ml.
ALARMS
Low water level for the steam generator.
Safety door open or no distillation/digestion tube in place.
Steam generator over temperature.
ADDITIONAL REQUIREMENTS
To complete Kjeldahl Nitrogen analysis a digestion block is also required.
(See Bloc Digest pages 251 and 252).
MODEL
Part No.
Height / Width / Depth
cm
Power
W
Weight
Kg
4002430
75 50 50
1800
38
Supplied complete with a MACRO Ø 42 mm tube, set of connection tubes, set of reservoirs, 250 ml. of mixed indicator 4.8 and 100 gr. of sulphate ammonium.
AUTOMATION
Closing and opening of the condenser cooling water in line with the distillation process.
Dosing of Boric Acid.
Dosing of NaOH once the distillation has started.
Select NaOH and Boric Acid volume.
«On-line» evaluation of distillate.
Auto detection of the end of the distillation process.
Special functions to maximise performance.
Special functions for maintenance.
REAGENTS
All the reagents used in the «PRO-NITRO A» are easily located:
- Solution of 30-40% NaOH.
- Solution of Boric Acid at 1% concentration ( approx.) with mixed indicators
(Bromo-cresol green and methyl red).
- Reagent for titration: HCl or H2SO4 from 0.05N or 0.25N adjusted to 0.001
Normal.
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
7
7
1
2
3
4
5
6
CONTROL PANEL
1. Menu to configure the date, time and selectable parameters.
2. Print the analysis information using the optional printer
4120113, purchased as an accessory.
3. <<ESC>> to cancel changes and escape from the menu.
4. Increase values and navigation through the menu.
5. Decrease values and navigate through the menu.
6. <<ENTER>> to accept changes to parameters and navigation through the menu.
7. LCD display to visualise parameters and results
ADVANTAGES
Excellent precision on results.
Complete Nitrogen recovery from the sample.
Minimum operator intervention.
No calibration required.
Minimum analysis time.
RESULTS
The results can be downloaded to a printer (Optional),
required for GLP, and includes the following data:
- Consecutive unrepeatable
I.D. number of analysis.
- Date and time.
- Volume of NaOH.
- Volume of Boric acid.
- Reagent normality.
- Nitrogen detected.
ACCESSORIES
QUALITY CONTROL INFORMATION
ALL OF THE KJELDAHL DISTILLATION UNITS 4002430 REQUIRE A PROTOCOL ASSAY FOR
THE RECOVERY OF NITROGEN WHEN MANUFACTURED.
THESE RESULTS COME WITH THE EQUIPMENT AND ARE VALID FOR IQ AND OQ CLARIFICATION.
COMPLEMENT
15/10/05 12:16:08
MICROPROCESSOR CONTROLLED.
AUTOMATIC ZERO ABSORBANCE AND 100% TRANSMITTANCE.
ALPHANUMERIC 20 CHARACTER 2 LINE L.C.D. DISPLAY.
Analysis Nr: 087598
NaOH:
75ml.
Boric:
25ml.
Normality: 0.1503
Results:
Reagent:
10.521ml
Nitrogen: 22.1382mg
Ink printer (not thermal paper), size
(4/6/10 cm) suitable for use with
the PRONITRO A.
Paper 2 1/4” (56 mm) wide.
Interface RS232.
Includes interface and mains cables.
Part No. 4120113
Digestion and distillation tube. Series MACRO of 250 ml
volume. Graduated to 100 ml 42 mm Ø x 300 mm high.
Part No. 4042300
Tube for digestion and distillation. Series MICRO of 100
ml volume. 26 mm Ø x 300 mm high.
Part No. 4001045
Digital colorimeter “Pro-A 520”
APPLICATIONS
Reagent preparation for Pro-Nitro A.
FEATURES
Wavelength range: 400 to 800 nm, by using special filters.
Standard filter: 520 nm.
Expanded Absorption range: -0.3 to 3.5 O.D.
Transmission: 0 to 100 T %.
Photometric accuracy: >1 %. @ 1.000 A.
Photometric precision: ±1 %. @ 1.000 A.
Photometric stability: 0.004 A/hr. @ 0.000 A.
Light source: Long life tungsten lamp.
Detector: Solid state.
Sample chamber: 10 mm cuvettes.
Minimum volume: 1 ml.
Display: Alphanumeric LCD display of 2 lines of 20 characters.
Calculation functions: Transmission T %.
Absorbence, Concentration by factor or standard concentrations.
Calibration: Self adjusting by software.
RS-232 interface.
MODEL
Part No.
4120029
Built
in printer
NO
CONTROL PANEL
ON/OFF switch.
Interactive LCD display.
Numeric and function keypad.
SPARE
Lamp of 6 V / 6 mm.
Part No. 4512009
Height / Width / Depth
cm
11
18
28
Power
W
Weight
Kg
10
4.5
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
8
Solvent recovery extractor for fats and oils “Det-gras N”
FOR THE DETERMINATION OF FATS BY SOXHLET METHOD.
SAFETY PROTECTION IP65.
Equipment for the extraction of fats and soluble substances that will dissolve in solvents. Based on the Soxhlet methods by Randall, the DETGRAS-N extracts fats (and or other substances) from the sample by dissolving them in a solvent. If compared to the classic standard soxhlet
method, a time saving of between 30-70% can be obtained due to a two
stage extraction process and high speed in obtaining high temperatures.
APPLICATIONS
Practically all methods of classic soxhlet extraction can be substituted by
the DET-GRAS N. Typical fat determinations are: in meat products, animal
fodder, pre-prepared foods, fish etc. Also suitable for the extraction of soluble components in paper paste, textile fibres etc.
FEATURES
Heating by protected electric heater, distributed throughout the radiator
surface that provides homogeneous heating throughout the samples.
Electrical safety according to IP65.
Robust temperature control by a durable thermocouple.
Safety over temperature device.
Outer case made of solvents resistant epoxy coated steel.
Extractions can be completed using glass or cellulose thimbles.
Compatible with most common solvents: Petroleum ether. Diethyl ether,
hexane, acetone acetonitrile etc.
Supplied complete with 2 sets of seals, adapters for different solvent
types.
Typical extraction time (food fats) 50 minutes.
SPECIFICATIONS
Cellulose extraction thimbles Øext 26 x 60 mm.
Reusable glass thimbles Øext 34 x 80 mm.
Working temperature of 90 to 240 °C.
Solvent recovery 60 to 80 %.
Solvent volume (by sample): up to 50 ml.
Program memories: 16.
Extraction time <<boiling>>: from 0 to 99 minutes.
Extraction time <<rinsing>>: from 0 to 99 minutes.
Time to recuperate solvents: from 0 to 99 minutes.
CONTROL PANEL
LCD display of 2 lines of 20 characters.
Keypad with 4 push buttons to select temperature, time and programs.
MODELS
Part No.
4002841
4002842
Supplied with
Cellulose sample thimbles
Thimble rack
Support rack beakers
Aluminium tubes for thimble support
Extraction support for thimbles
Aluminium solvent beakers
Magnetic tongs for thimble manipulation
Tongs for manipulation of Aluminium beakers
Support rack
Transporting support handles
Butyl Joints
Vitron Joints
model 6
places
model 2
places
25
3
3
6
18
18
1
1
1
1
6
6
25
3
3
2
6
6
1
1
1
1
2
2
No. of
places
2
6
Height / Width / Depth Water consumption
cm
litres/minute
70
70
45
75
40
40
1
2
Power
W
Weight
Kg
200
600
19
25
Accessories supplied with the 6 place model.
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
9
Extractor for the determination of cellulose and fibre “Dosi-fiber”
APPLICATIONS
Total Fibre (WEENDE,VAN SOEST or similar).Dietary fibre. Neutral detergent fibre.
Acid detergent fibre. Other extraction processes which do not use acetic acid, acetic
trichloric acid or nitric acid. Textile fibre. Wood and paper fibre.
EQUIPMENT DESCRIPTION
Integral extraction and filtration.
No sample transfer reduces the risk of sample loss, since the tubes,crucibles and filtre are transferred with the samples in place.
Excellent results due to reproducible operating conditions.
Easy sample handling due to the special crucible support stand.
Versatile and precise test procedure that allows the samples to be weighed at various
stages in the extraction process.
FEATURES
Rugged external case with a “RILSAN” protective coating. All equipment components; condenser, valves, heater, compressed air valves and controls are all protected within the main case. Infrared heating elements.
CONTROL PANEL
Mains illuminated ON/OFF switch.
Switch for compressed air pump.
Heating element with electronic control.
TECHNICAL DATA
Sample size: 0.5 to 3 g (Normally 1 g).
Reproducibility: approximately ±1 % for fibre
level between 5-30 %.
Measuring range: 0.1 to 100 %.
Cooling water consumption: 1 litre/minute.
6 places extractor, part no. 4000623.
ACCESSORIES
Double hotplate for reagents.
Power consumption 1750 W.
Part No. 4000634
Beaker for reagents.
Part No. 1000635
EQUIPMENT
Comes complete with: crucible with a porosity P-2, Crucible support rack, heater lid
and holder manipulator.
MODELS
Part No.
4000599
4000623
No. of
places
Height / Width / Depth
(exterior) cm
Power
W
Weight
Kg
4
6
56 43 32
56 57 32
1000
1500
19
25
SPARES
Support rack
4 crucibles.
Part No. 4000600
Support rack
for 6 crucibles.
Part No. 4000624
Crucibles
with a P - 2 porosity.
Part No. 4000601
EQUIPMENT FOR THE DETERMINATION OF TOTAL DIETARY FIBRE, ENZYMATIC METHOD
THE DETERMINATION OF TOTAL DIETARY FIBRE BY THE ENZYMATIC METHOD (AOAC, AACC) IS VERY DIFFERENT TO THE WEENDE AND THE DE VAN
SOEST METHODS. THE EQUIPMENT FOR THIS ANALYSIS DEPENDS ON THE ENZYME KIT THAT YOU ARE GOING TO USE. ONCE THE TYPE OF ENZYME
KIT IS SELECTED THE KIT INSTRUCTIONS WILL INDICATE THE NECESSARY EQUIPMENT TO COMPLETE THE ANALYSIS. THE COLD EXTRACTION UNIT
EF-1425 PART NO 4001425 AND THE RECIPROCAL BATH PART NO 6032011 ARE FREQUENTLY USED (SEE PAGE 93).
Cold extraction unit “EF-1425”
DESCRIPTION
Specifically designed unit for cold extraction of up to 6
samples simultaneously, using acetone or other solvents. Complements the Dosi-Fiber for the analysis of
crude fibre.
Components: 1 litre receptacle for solvent recovery,
suction tube and 6 adapters to hold the filtration crucibles Part No. 4000601.
A pump or jet pump will be required to connect to the
suction tube.
Comes complete with: blank stoppers in the case that
not all of the 6 crucible places are used and a 1 litre solvent recovery vessel.
FEATURES
Stainless steel AISI 304, extractor, modular construction, easy to use and fast removal for efficient cleaning.
Support and crucible rack, made from hardened glass.
MODEL
Part No.
Height / Width / Depth
(exterior) cm
4001425
45
20
34
Weight
Kg
3
ACCESSORY
Jet pump.
Part No. 7000293
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
10
Oenological Distillation unit “DE-1626”
APPARATUS TO OBTAIN THE DISTILLATION OF ALCOHOL FROM ALCOHOLIC BEVERAGES IN ACCORDANCE
WITH CEE NO. 2676/90 ( WINE ANALYSIS) AND CEE NO. 2870/2000 ( ANALYSIS OF SPIRITS.)
APPLICATIONS
Degree of alcohol in wines, Degree of alcohol in spirits, Volatile acids and Sorbic acid.
FEATURES
Vapour distillation.
Designed especially to obtain the distillation of wines and spirits to
determine the alcohol grade by volume, volatile acid, ascorbic acid
and other components.
Distillation volume up to 400 ml.
Auto stop at the end of the distillation.
Simple operation with minimum service.
Vapour generator protection system.
- Tube Ø 42 mm for volatile acid samples.
- Tube Ø 52 mm for volatile acid samples and 100 ml proof alcohol.
- Tube Ø 80 mm for samples of 200 ml for proof alcohol.
- 200 ml Matrix flask to collect distillate.
TECHNICAL SPECIFICATIONS
Validated to the criteria of CEE No. 2676/90 and CEE No. 2870/2000
Distillation speed: 30-40 ml/min (Recover of 200 ml of distillate in
5/6 minutes).
Condenser coolant water rate: 80-100 l/hr.
Generator water consumption: 1 and 1.25 ml for each ml of distillate.
Vapour generator power: 2400 W.
Automatic termination of final distillation at
200 ml of distillate. By using the ADD function small quantities of distillate can be added to accurately fill the matrix flask to the
mark without having to add water to the distillation.
CONTROL PANEL
Control Panel.
Electronic controller.
Mains switch.
START Push button.
STOP Push button.
ADD Push button.
By the use of the ADD button allows the distillate to set burette level, then, there is no need to fill up with
water to a level of 200 ml.
VALIDATION
The oenological DE-1626 has been validated by the oenological laboratory INCAVI in Vilafranca del Penedés. This
laboratory has completed analysis from the distillation unit DE-1626 for the determination of alcohol proof by volumetric analysis, following the criteria of CEE No 2676/90 and CEE 2870/2000. They have analysed samples of
hydrated alcohol, different wines and spirits with a high alcohol content. The unit was successfully appraised by the
laboratory.
MODEL
Part No.
4001626
Height / Width / Depth
cm
90
30
30
Power
W
Weight
Kg
2400
20
Supplied with tubes and flasks Ø 42, 52 and 80 mm and
a 200 ml matrix flask.
ACCESSORIES
Support rack for 6 tubes,
made of stainless steel.
Part No. Suitable tubes dimensions
4000648
Ø 42 mm
4001473
Ø 52 mm
Matrix flask 200 ml.
4001613
Ø 80 mm
Part No. 1001636
Glass tube adapters.
Part No.
Dimensions
4042300 Ø 42 x 300 mm
1001422 Ø 52 x 300 mm
1000646 Ø 80 x 300 mm
Alcoholmeters, graduations
in 0.1 grade alcohol.
Part No. Graduations
1001629
0 - 10
1001630 10 - 20
1001631 20 - 30
1001632 30 - 40
1001633 40 - 50
1001634 50 - 60
1001635 90 - 100
Alcoholmeters stand 6 places.
Part No. 1000015
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
11
COMPLEMENTS FOR THE OENOLOGICAL DISTILLER “DE-1626”
ALL BASIC WINE ANALYSIS WITH A SIMPLE MANUAL EQUIPMENT, COMPOSED OF: OENOLOGICAL ANALYSER PHOTOMETER “M-3000”, MICRO-CENTRIFUGE “CENCOM-1” AND DRY-BLOCK THERMOSTAT “ENOBLOC”.
Oenological analyser photometer “M-3000”
SMALL BENCHTOP ANALYSER.
FOR COLOR MEASUREMENT, FOLIN-CIOCALTEAU INDEX AND FOR ENZYMATIC ANALYSIS.
APPLICATIONS
With the oenological application photometer, the following determinations can be performed:
1. Wine colouring intensity (absorbances addition at:
420, 520 and 620 nm.)
2. Folin index (polyphenols).
3. Grapes phenolic colour and maturity by means of
Cromoenos® method.
4. Enzymatic analysis for grape juice, grape juice-wine
and wine. Acids: acetic, malic, gluconic and lactic, glucose, fructose and glycerine.
Concentration range: from 0.001 to 9.999
Photometric accuracy: 1%.
Precision: ±1 %.
Photometric stability: better than 0.004 A/h.
Light source: halogen lamp 6V/12W.
Cell holder for 10 mm. path length cuvettes.
Internal calibration by software.
FEATURES
Wavelength range: from 340 to 750 nm, with interference filters with a 10 nm band pass.
Manual filter selection (12 positions filter disc).
Supplied with filters: 340, 420, 520, 620 and 750nm.
Other optional filters posible.
ABS, T% and concentration reading.
ABS reading range: from -0.3 to 3.5 OD.
T% reading range from 0 to 100%T.
MODEL
CONTROL PANEL
Filter change knob.
Numeric keypad and for functions.
Alphanumeric display with interactive messages.
RS-232 interface for connection to printer or computer.
Part No.
4120019
Height / Width / Depth
mm
Power
W
Weight
Kg
11 18 28
35
3
SPARE
Halogen lamp 6 V 12 W.
Part No. 4313040
Note: A visible ultraviolet range spectrophotometer UV2005 is needed for a total polyphenols index determination (absorbance 280 nm) and the Cromoenos® method exact and accurate measurement.
Part no. 4120020. Page: 235
ACCESSORIES
Glass cuvettes 10 mm. path length. 2 units pack. Part No. 5100021
Glass cuvettes 1 mm. path length. 2 units pack. Part No. 4120034
Polystyrene cuvette, semi-micro, 10 mm. path length. 100 units box. Part No. 5100023
Cuvettes adapter of 1 mm. Part No. 4120033
Microcentrifuge “Cencom I”
FOR MICROTUBES OF 2,2 / 1,5 – 0,5 AND 0,2 ML.
CONTROL PANEL
Start switch.
Push button Start/Stop.
LCD display indicating time and speed.
Time selector push button.
Speed selector push button.
Push button increase different parameters.
Push button decrease different parameters.
Push button motor drive rotation for quick acceleration
Short/Spin.
Push button open lid when cycle has ended.
APPLICATIONS
To guarantee an excellent reproductibility in the enzymatic analysis, it is recommended to centrifuge at
14.500 rpm with 1,5 to 2 ml. tubes, to remove interferences (yeast, bacteria and colouring matter).
The centrifuge is essential for the grape extract cleaning by means of Cromoenos® method.
FEATURES
see page 114.
MODEL
Part No.
5022000
Tubes capacity
Height/ Width/ Depth
(exterior) cm
Max. speed
r.p.m.
R.c.f.(xg)
Power
W
Time
selected
Weight
Kg
12
15 21 25
14500
14000
105
till 99’ 99’’
4
Comes complete with 12 adapters of
0,5 and 0,2ml.
Metallic thermostat dry block “Enobloc”
APPLICATIONS
To use the enzymatic reagents performing at full capacity, it
is recommended to incorporate the thermostat dry-block incubator for tubes/cuvettes at a fixed temperature of 35 ºC.
Part No. 7001570
Capacity: 15 cuvettes pathlength 10 mm, which can be macro or semi-micro of 1,5 ml..
Cromoenos® is a registered trademark by Bioenos S.L
MODEL
Part No.
Height / Width /Depth
(exterior) cm
7001570
http://www.bioenos.com
11 18 28
Stability
°C
±0,5
Power
W
Weight
Kg
10
2,4
(for analy tical applications, please check out the website).
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
12
APPARATUS FOR WATER ANALYSIS
Thermo reactor for determining COD Chemical
Oxygen Demand of waste water plants
STANDARD TO C.E.E. AND UNE 77-004.
REFLUX METHOD.
FEATURES
Composed of a Hot block for 6,12 or 20 samples, process programmer and lifting racks.
Uniform heating throughout the block to all samples. Automatic temperature and time control during digestion.
C.O.D. unit comprises of:
- 1 metallic hot block.
- 1 Processor for temperature and time.
- 1 Support rack for tubes.
- 1 Support rack for condensers.
- C.O.D. tubes with an aperture of 29/32.
- Condensers for C.O.D.
MODELS - EQUIPMENT DESCRIPTION
DQO. - 6
DQO. - 12
DQO. - 20
Part No.
No. of places
4000638
4000639
4000640
6
12
20
INDIVIDUAL PARTS LIST AND SPARES
Hot block. This block cannot be used without the RAT
controller of temperature and time.
Part No.
4000507
4000508
4000509
No. of
places
Ø tube
mm
6
12
20
42
42
42
Height / Width / Depth
(exterior) cm
18 33 28
18 39 33
18 44 39
Temperature
°C
Power
W
Weight
Kg
45 - 450
45 - 450
45 - 450
1500
2100
2500
18
25
31
Tube support rack.
Made of chemically treated dural sheet metal, with handles and
removable panels that maintain
the heat around the tubes and
allow the user to examine the
samples during the process.
Part No.
4005071 for C.O.D. 6 (block 4000507).
4005081 for C.O.D. 12 (block 4000508).
4005091 for C.O.D. 20 (block 4000509).
Condenser tube
support.
Part No.
4000643 6 places.
4000644 12 places.
4000645 20 places.
Condenser tubes for C.O.D. process.
Part No. 1000642
Tubes for C.O.D.
Part No. 1000641
System programmer for temperature/time RAT-2.
Part No. 4001538
Features
Display of time, temperature and program.
Selectable temperature from 45 to 450 °C. Memory
capacity: 10 programs of 5 stages of each program.
Maximum time per stage: 600 minutes. Visual and
acoustic alarm at the end of the cycle. Alarm if the
temperature probe fails.
Control Panel
Mains switch.
Temperature display.
Push button to select temperature.
Push button to increase value.
Push button to start.
Push button to stop.
Push button to decrease value.
Push button to select time.
Display time and program number
Push button to select program.
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
13
Laboratory flocculator“Flocumatic”
FOR THE DETERMINATION OF THE NECESSARY AGENTS REQUIRED FOR SEDIMENTATION.
DIGITAL ELECTRONIC CONTROL OF SPEED AND TIME FUNCTIONS.
Maximum torque per stirring unit is 40 Ncm. Maximum viscosity 30.000 mPas.
NEW
DESIGN
APPLICATIONS
Optimization of coagulant additives and poly-electrolytes for surface and residual
water treatment.
Evaluation of the efficiency of an absorbent in toxic agents.
Polyvalent. Without transmissions by belt. Due to its powerful torque it
allows stirring and mixing high viscosity substances.
FEATURES
Stirring equipment for 4 or 6 places that accommodates beakers up to 1000 ml tall
shape or 2000 ml short shape.
Stirring speed from 15 to 200 r.p.m.
Silent running.
Adjustable timer from 1 to 999 minutes or continuous operation.
Easily adjusted height over head stir, bars made of AISI 304 stainless steel are easily
fixed in position.
Two vertical and horizontal adjustable illumination units can be placed in the unit.
This adjustable accessory allows the light angle to be varied according to the samples being run. An original Selecta design. See accessories part numbers 3000834
and 3000915, 4 and 6 place models that obtain simultaneous front and back lighting.
The main case of the unit is made of epoxy coated steel, with AISI 304 stainless steel
supports with anti slip rubber feet.
1
CONTROL PANEL
1. Alphanumeric display. Indicates rpm
and time.
2. Parameter invalidate button.
3. Parameter value decrease button.
4. Parameter value increase button.
5. Parameter validation button.
Flocculator “Flocumatic” with
horizontal and vertical illumination (6 places).
Flocculator “Flocumatic”
with horizontal illumination
(4 places).
MODELS
Part No.
3000833
3000914
2
3
4
5
No. of
places
Speed
r.p.m.
4
6
15 - 200
15 - 200
Height / Width / Depth Illumination
(exterior) cm
power W
52 70 23
52 99 23
40
50
Power
W
Weight
Kg
160
170
24
36
ACCESSORIES
Illumination units, simultaneous
lighting horizontal and vertical.
Part No. Model part No.
3000834 3000833 4 places.
3000915 3000914 6 places.
Portable flocculator “4P-M”
FOUR POSITIONS. WITH ILLUMINATION.
NEW
FEATURES
Mains voltage or portable connection to a cigarette lighter within a car (12 V DC),
for achieving analysis for a site chemical dose measurements of waste water treatment plants.
Head stirrers made of AISI 304 stainless steel with variable height.
Suitable for vessels up to 1 litre capacity.
1
CONTROL PANEL
1. Alphanumeric display. Indicates rpm
and time.
2. Parameter invalidate button.
3. Parameter value decrease button.
4. Parameter value increase button.
5. Parameter validation button.
MODEL
Part No.
3000835
2
3
4
5
Height / Width / Depth
(exterior) cm
Power
W
Power supply
Weight
Kg
37 25 27
20
220-240V/50-60Hz
6
ACCESSORY.
Carrying case.
Part No. 3000836
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
14
Water distiller “Aquasel”
DISTILLATION CAPACITY: 4 AND 6 LITRES/HOUR.
Made from stainless steel and glass, easy
disassembly for cleaning and storage.
COMMON FEATURES
Easy to use, suitable for continuous distilled water requirements.
Boiler unit and heater element made of AISI 304 stainless steel, with lid and condenser made of
orosilicate glass. The glassware pressure seal connection is an original Selecta design.
Safety system cuts off power to the heater element if there is not enough water. Distilled water
produced is pyrogen free.
MODELS
Part No.
Distillation Water consumption Conductivity
capacity l/h
l/min
at 20 °C
Aquasel 4 4903004
4
Aquasel 6 4903006
6
Supplied complete with silicon seals.
1
2
3 µs/cm
3 µs/cm
Ø / Height
(ext.) cm
Power
W
Weight
Kg
18 43
23 68
2400
4800
5
8
Distillation still “L-3”
DISTILLATION CAPACITY: 3 LITRE PER HOUR.
FEATURES
Made entirely of borosilicate glass, with protective case support, designed for functionality, that
permits easy access to the quartz heater elements.
Functions: automatic with continuous water production. Produces distilled water of a high purity,
free of pyrogens and metal ions.
Equipped with quartz heater elements and protection device using a safety thermostat that is activated in the case of low water pressure to the condenser or boiler unit. The unit automatically reactivates when the water pressure is restored.
Suitable for wall mounting.
MODEL
Part No.
4903000
Distillation
capacity l/h
Water consumption
l/min
Conductivity
at 20 ºC
Height / Width / Depth
(exterior) cm
Power
W
Weight
Kg
3
1
3 µs/cm
34.5 56 19
2200
4.5
NEW
Water distiller “D-4 Large”
DISTILLATION CAPACITY: 4 LITRES/HOUR.
FEATURES
Equipment entirely made of borosilicate glass, with protective case designed for functionality that allows an easy
access to the glass and heating elements.
Automatic operation.
Continuous production of high purity distilled water, free of dissolved gases, metals, salts and pyrogens.
Spiral heating system.
Double safety system:
1. By a presostat that turns the heater off in case of lack of water supply. 2. Water level device that avoids the computer to function until the heating element is covered with water.
CONTROL PANEL
Power switch.
Lack of water flow indicator lamp.
MODEL
Part No.
4903001
Distillation
capacity l/h
Water
consumption l/min
Conductivity
at 20º C
Height / Width / Depth
(exterior) cm
Power
W
Weight
Kg
4
1
2 µs/cm
69 28 28
3000
6,3
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
15
Water distiller, “AC-L4” and “AC-L8”
DISTILLATION CAPACITY: 3.5 AND 8 LITRES/HOUR.
FEATURES
Tank and heating element made from stainless steel.
External case made from epoxy covered steel.
Easily dismantled for cleaning and service. All seals made from silicon.
In the case of over temperature or low water supply, a safety thermostat cuts power to the heater.
Water supply tube Ø 10 to 11 mm.
Distilled water tube connection Ø 12 mm.
Voltage: 230 V / 50/60 Hz
CONTROL PANEL
Illuminated power switch.
Safety switch thermostat with rearm system.
MODELS
AC-L4
AC-L8
Part No.
4903007
4903008
Distillation Water consumption
capacity l/h
l/min
4
8
1
1,4
Conductivity
at 20 °C
2,5 µs/cm
2,5 µs/cm
Height / Width / Depth
cm
44
61
25 23
26 26
Power
W
Weight
Kg
3000
6000
12
14
Water distiller “L-4 Cabinet”
DISTILLATION CAPACITY: 4 LITRES/HOUR.
NEW
FEATURES
Equipment entirely made of borosilicate glass, with protective case with transparent plastic door that allows an easy
access to the glass and heating elements.
The water distiller incorporates a boiler, a large surface cooling and two heating elements with protective quartz.
Desktop model with device to hang it on the wall.
Continuous production of high purity distilled water free of dissolved gases, metals, salts and pyrogens.
Easy to dismantle for a complete cleaning.
Automatic operation.
Totally automatic operation:
• The equipment disconnects when the distilled water tank is full.
• The equipment reconnects when emptied.
• Automatic operation of the distiller.
Double safety system: 1. By a thermostat that turns the heater off in case of lack of water supply. 2. Water level device that avoids the computer to function until the heating element is covered with water.
Note on the outlet water: Depending on the inlet water quality, it
can be of type II or III (according to ASTM). All parameters have been tested under standard laboratory conditions.
CONTROL PANEL
Start up main switch.
Light indicators of heating, cleaning, of lack of water and tank full.
MODEL
Part No.
4903002
Distillation
capacity l/h
Water
consumption l/min
Conductivity
at 20º C
Height / Width / Depth
(exterior) cm
Power
W
4
1
2 µs/cm
40 55 22
1x3000
Weight
Kg
NEW
12
Water distiller “R-4 Reser”
DISTILLATION CAPACITY: 4 LITRES/HOUR.
STORAGE TANK: 8 LITRES.
FEATURES
External case epoxy covered.
Cooling and heating elements made of stainless steel.
Easy to dismantle for cleaning.
Thermostat that disconnects the heater when there’s lack of water supply.
Monitoring function that disconnects the distiller when the storage tank is complete
full, and resumes as it empties.
Distilled water dispenser located in the front part.
Distilled water and water supply racords of 3/4 inch.
Desktop model with device to hang it on the wall.
MODEL
Part No.
CONTROL PANEL
Illuminated power switch.
4903005
Lack of water flow indicator lamp.
Distillation
capacity l/h
Water
consumption l/min
Conductivity
at 20º C
4
1
2,5 µs/cm
Height / Width / Depth
(exterior) cm
47 54
Power
W
31 3000
Weight
Kg
24
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
16
Water double distillation “L-4B”
DISTILLATION CAPACITY: 4 LITRES/HOUR.
FEATURES
Made completely from borosilicate glass with protective case that has easy access to
the heater elements and glass parts.
Automatic function and continuous production.
Produces high quality double distilled water free from pyrogen and metallic ions.
It functions through a dual distillation process:
The distilled water from the first stage is collected by the heater reservoir of the second stage, that starts the double distiller function when when the water’s level is
optimum, thus providing double distilled process.
Protection with a safety thermostat is activated if there is insufficient cooling water.
Reactivated automatically when the water supply is re-established.
Water flow stop if there is an electrical fault.
If it is required to store the distilled water and to prevent over filling, the system stops,
switches off power and disconnects the water flow when is full.
Voltage: 400 V / III+N, 50/60 Hz = 8.67 A
MODEL
Part No.
4903010
Distillation
Water
Conductivity
capacity I/h consumption l/min at 20 ºC
4
1,3
0.5 µs/cm
Height/Width/Depth Power Weight
cm
W
Kg
46 66 50 2x3000 25
NEW
SPARES
Heater element made of quartz. Part No 4903011
Glass still, borosilicate glass (front –1). Part No. 4903012
Glass still, borosilicate glass (interior-2). Part No 4903013
Condenser, borosilicate glass (the equipment comes with 2 condensers. Price
provided is for 1 spare condenser). Part No. 490301
Water distiller, specially for autoclaves “Dest-4”
DISTILLATION CAPACITY: 1.5 LITRES/HOUR. INTERNAL CAPACITY 4 LITRES.
FEATURES
Case made from thermo resistant plastic. Internal stainless steel. Cooling by forced air though a condenser. Without glass heater elements, Easy to use. Safety cut
out if over temperature due to insufficient water.
Supplied complete with a 4 litres plastic bottle and three dispenser tap with filter.
Note: for daily use it is recommended to change the filter every 3 months.
No
external additional water
required.
MODEL
Part No.
4001729
Distillation
capacity l/h
Conductivity
µs/cm
Ø Height
cm
Power
W
Weight
Kg
1.5
5
29 39
750
3.5
Descaler “C-3”
50 Litre distilled
water reservoir
APPLICATIONS
Pre-treated water that contains large quantities of
CaCO3 (lime). For general laboratory use.
Recommended for use with distillation units where water hardness is above 25° french.
TECHNICAL SPECIFICATIONS
Metal container of AISI 304 stainless steel with regeneration of salt by using a two way reverse valve system.
Resin capacity: 12 litres. Regeneration salt: 2 Kg.
Regeneration cycle: 1200 litres to 60° french / 4800 litres to 35° french.
Regeneration cycle for distillation of: 300 to 800 litres.
Maximum mains water pressure: 4.5 Kg/cm2.
Maximum supplied admissible hardness: 60° french.
Out put hardness: 1° french.
External measurement: 62 cm high x 19 cm Ø.
Weight: 20 Kg.
Part No. 0703052
SPARE. Dispensing filter tip. Part No. 4001730
FEATURES
Recommended for the storage of distilled
water. Made of high density polyethylene.
50 litre capacity, with handles and dispenser tap. 15cm Ø top lid with stopper.
Dimensions: 62 cm high x 38 cm Ø.
Part No. 0106006
Comes complete with in and out
3/4” tubing.
ACCESSORY
Water reservoir trolley.
Robust steel trolley with epoxy coating.
Lockable wheels, Inner section for holding jars and carboys etc.
Fits containers 38 cm Ø.
Height 48 cm.
Part No 5903049
0106006
5903049
®
Tel: 1-201-599-1400 • Fax: 1-201-599-1406 • mail@globescientific.com • www.globescientific.com
17
Download PDF

advertising