• Designed for quick installation
• Individually protected, electronically fused outputs
• Short circuit isolation technology for uninterrupted operation
• Class 2, Power limited outputs
• Removable output terminal blocks for quick installation
• Diagnostic LEDs for quick troubleshooting
• Automatic switch over to stand-by battery
• AC line cord included
• 8 outputs
• Battery Charger
• Power output: 12VDC@11 Amps
• Maximum temperature range:-20° C to 40° C; (For indoor use only)
• Maximum battery charge 500mA (Subtract from total output)
• Individual outputs current limited at 2.5 Amps per circuit.
• UL listed to UL-60950 Information Technology Equipment
• Maximum ripple 150mVp-p, Maximum noise 200mVp-p
• Red LED’s indicate DC power presence on each circuit
• Built-in charger for sealed lead acid battery
• Relative humidity: 20% ∼ 90%
• FCC PART 15, ICES 003-2012
• CE/LVD EN60950-1
• CE/EMC:EN55022,EN55024
• 85% of Efficiency with full load
• Dimensions: 17”L x 13.5”W x 4.75”H (43.2 cm x 34.3cm x 12.06 cm)
• 2 batteries required for backup
This switching power supply/distribution units convert 120VAC input into 12VDC at
11 amps of continuous supply current. Built in distribution boards allow for power
delivery across multiple outputs while offering electronically fused protection
on each circuit. This general-purpose power supply has a wide range of
applications for access control, security and CCTV systems that require
additional power. For convenient installation, it comes completely
assembled with a compact steel enclosure, power
cord and all connecting hardware.
Tel: 514.648.6648 • Fax: 514.667.0745 • info@inaxsys.com
Power Module 1: Output Terminal
Block for circuits 1-4
Power Module 2: Output Terminal
Block for circuits 1-4
AC power input
Keep .25" spacing between power-limited wiring and non power-limited wiring
Download PDF