FCC Statements
Instructions for M-BTi Digital Game Camera
Moultrie Products
THANK YOU for your purchase of an M-BTi Digital Game Camera. Please read this booklet before using the unit. If you should
have any questions about this product, please contact us using the information on the back of this booklet. Please register
your camera at www.moultriefeeders.com/warranty to activate your warranty.
Note: changes and modifications not expressly approved by the party responsible could void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Motion Sensor
Infrared LED Flash
NOTE: This device complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device
does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- lncrease the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Camera Lens
Light Sensor
ON/OFF Switch
SD Card Slot
PRADCO Outdoor Brands • 3280 Highway 31, Ste B • Calera, AL 35040
01092018 / MCG-13268
M-BTi (2018) manual_ENGLISH_1-9-18.indd 1
Micro USB Port
External Power Port
Battery Compatment
1/9/18 2:56 PM
1. Installing Batteries
Open the M-BTi using the latch on the right side of the camera housing. The M-BTi requires 8 AA alkaline or lithium batteries. There are two levels
for battery placement within the compartment. Be sure to orientate the batteries according to the polarity icons found in the compartment.
2. Installing SD Card
Access the SD Card port using the latch on the right side of the camera housing. Slide card into slot with label side up (see icon next to card slot).
Card will click into place. To remove, push card inward to eject. Be sure to format your SD Card once you have downloaded the SmartSet™ app
(see Section 5 below).
3. Powering Up
The power switch is located next to the SD card slot. Slide left for on, the red LED will come on momentarily.
4. Understanding the Red LED
The red LED comes on:
A. To indicate there is power to the camera. The LED will then go off indicating it is ready to capture images.
B. Once the sensor detects movement and captures an image
C. When a Bluetooth connection is made using the SmartSet app
5. Downloading the SmartSet™ app
All settings for the M-BTi are controlled using the Moultrie SmartSet app and a Bluetooth connection. Download your free SmartSet app
through the App Store or on Google Play.
6. SD Card Slot
Accepts up to a 32GB SD Card (Class 4 or higher) for photo and video storage. NOTE: A Class 4 or higher SD Card must be installed for the camera
to operate (sold separately). Ultra/turbo SD cards are not recommended.
7. USB Port
Download still pictures and video onto your computer by connecting a micro-B to USB cable (not included) to the USB port.
8. External Power Port
Accepts Moultrie power accessories (sold separately) only. Refer to www.moultriefeeders.com for more information.
NOTE: The use of any other power source will void your warranty and possibly harm your camera.
M-BTi (2018) manual_ENGLISH_1-9-18.indd 2
Important Battery lnformation
- Only use Alkaline or Lithium batteries. We recommend the use of Energizer batteries.
- Do not mix old and new batteries. Always replace ALL the batteries at the same time.
- When the camera is not in use, please remove the batteries.
- Using weak batteries can adversely affect the performance of your camera and degrade the Bluetooth® connection between your app and camera.
Moultrie Limited Warranty
This product has been thoroughly tested and inspected before shipment. It is guaranteed from defects in material and workmanship from the
date of purchase for 2 years. Under this limited guarantee we agree to replace or repair free of charge any part or parts which have been found to
be defective in original material or workmanship. Should you require in-warranty service, call our Customer Service Department. If your problem
cannot be addressed over the telephone, we may need you to send us your defective product plus proof of purchase.
You must register your camera at www.moultriefeeders.com/warranty to activate your 2-year warranty.
For troubleshooting and helpful tips please visit the “Help” section within the Moultrie SmartSet app. If you require additional assistance email us
at info@MoultrieSmartSet.com.
Returns and Repairs
Please visit http://www.moultriefeeders.com/return-policy and complete the form.
Moultrie Mobile® Compatibility
The M-BTi game camera is compatible with Moultrie Mobile when connected to a Moultrie Mobile modem. Please visit Moultrie Mobile.com for monthly
plan pricing and more information.
Terms and Conditions
This product and the Moultrie SmartSet application are subject to terms and conditions. Use of the product or the Moultrie SmartSet application
constitutes acceptance of those terms and conditions. For details about the terms and conditions, download the Moultrie SmartSet application for
your mobile device.
1/9/18 2:56 PM
Download PDF