1/3” ccd sony super high resolution color day &

1/3” CCD SONY SUPER HIGH RESOLUTION
COLOR DAY & NIGHT CAMERA
ART. HCAM675B-HCAM676B
Please read this manual thoroughly before use, and keep for
future reference.
Via Don Arrigoni, 5 24020 Rovetta S. Lorenzo (Bergamo)
http://www.comelitgroup.com e-mail:export.department@comelit.it
WARNINGS AND CAUTIONS
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT INSERT ANY
METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON
THE EQUIPMENT.
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICABLE PARTS INSIDE.
REFFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated ''dangerous
voltage'' within the product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
PRECAUTIONS
Safety
Installation
Should any liquid or solid object fall into the cabinet,
unplug the unit and have it checked by
qualified personnel before operating it any further.
Do not install the unit in an extremely hot place or in a
place subject to
excessive dust,
mechanical
vibration.
Unplug the unit from the wall outlet if it is not going to
be used for several days or more.
To disconnect the cord, pull it out by the plug. Never
pull the cord itself.
Cleaning
Clean the unit with a slightly damp soft cloth.
Use a mild household detergent. Never use
strong solvents such as thinner or benzine as
they might damage the finish of the unit.
Allow adequate air circulation to prevent internal heat
build-up. Do not place the unit on soft surfaces (rugs,
sofas,
etc.)
or
near
materials
carpets,
(curtains, draperies) that may block the ventilation
holes.
Retain the original carton and packing materials for safe
transport of this unit in the future.
ii
IMPORTANT SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that produce
heat.
Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where they
exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket or table
specified by the manufacturer or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been moisture, does not operate normally, or has
been dropped.
CAUTION – THESE SERVICING INSTRUCTIONS ARE FOR USE BY
QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK
OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING
OTHER THAN THAT CONTAINED IN THE OPERATING
INSTRUCTIONS UNLESS YOU QRE QUALIFIED TO DO SO.
Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed
Class 2 power source only.
iii
FCC COMPLIANCE STATEMENT
INFORMATION TO THE USER: THIS EQUIPMENT HAS BEEN TESTED
AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE,
PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED
TO
PROVIDE
REASONABLE
PROTECTION
AGAINST
HARMFUL
INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL
ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED
AND
USED
IN ACCORDANCE WITH THE INSTRUCTION MANUAL,
MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS
LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE
USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN
EXPENSE.
CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED
BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S
AUTHORITY TO OPERATE THE EQUIPMENT.
THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE A EST CONFORME À LA NORME
NMB-003 DU CANADA.
CE COMPLIANCE STATEMENT
WARNING: This is a Class A product. In a domestic environment this product
may cause radio interference in which case the user may be required to take
adequate measures.
iv
CONTENTS OF PACKAGE
Installation of the camera must be performed by qualified service personnel in
accordance with all local and national electrical and mechanical codes.
Carefully remove the color camera and its accessories from the carton
and verify that they were not damaged in shipment.
The contents of the package include:
1. Camera in Housing
2. Instruction Manual (This Document)
3. Accessory Kit for installing
4. Drilling guide label
1
1
1
1
v
TABLE OF CONTENTS
INTRODUCTION ----------------------------------------------------------------------------------------- 1
CAMERA CONNECTION & CONTENSTS of PACKAGE ------------------------------------- 2
CONTENTS of PACKAGE & QUICK INSTALL -------------------------------------------------- 3
OSD MENU STRUCTURE ---------------------------------------------------------------------------- 5
AUTO WHITE DEFECT & LENS ADJUSTMENT ---------------------------------------------- 12
SPOT OUT / JOY STICK KEY --------------------------------------------------------------------- 13
EXTERNAL DIMENSIONS---------------------------------------------------------------------------- 14
SPECIFICATIONS ------------------------------------------------------------------------------------- 15
vi
INTRODUCTION
The camera provides high-quality images using SONY 1/3” CCD and digital
Signal process LSIs.
Features:
●
1/3" EXview HAD CCD Ⅱ for an image of high sensitivity
●
●
●
●
●
●
2.8~12 mm D/N Varifocal (DC AI) / 5~50 mm D/N Varifocal (DC AI)
Digital Wide Dynamic Range (Adaptive Tone Reproduction)
Excellent picture quality
700 lines of resolution
Minimum illumination of 0.15 Lux (Color) / 0 Lux (B/W & IR ON)
Auto electronic shutter [1/60 (1/50) ~ 1/10000] and manual electronic
shutter modes
OSD (On Screen Display)
Auto and manual white balance modes
Auto BLC and HLC, Day & Night (Auto)
2D-NR
Smart IR
Privacy Zone 4 point, Motion Detection 4 Point
MIRROR, SHARPNESS, HUE, CONTRAST, GAIN
AGC (Auto Gain Control)
VIDEO OUT (BNC)
Internal sync.
Operates in 12VDC or 24VAC
(If using 12VDC power adaptor, please use a power supply capable of
supplying over 600mA)
Use Certified / Listed Class 2 power source only.
Auto White Defect detection
IP67 protection
●
●
●
●
●
●
●
●
●
●
●
●
●
●
IMPORTANT: the user of this camera is responsible for
checking and complying with local, state, and federal laws and
statutes concerning the recording and monitoring of audio
signals.
1
CAMERA CONNECTION
1.
Bullet Camera
2.
Power: power source from a DC 12V or AC 24V
3.
Video: BNC connector used to connect the camera to a monitor,
switcher, ect.
2
CONTENTS of PACKAGE
QUICK INSTALL
1. Drill the mounting location using the supplied drill guide label.
2. Attach the bullet housing to the ceiling using suitable fasteners, PTS M5 x
30MM screws are supplied only use if they are suitable.
3. After bullet camera adjust the angle and rotating, fixed to stand using the M6
L-WRENCH.
3
(If something is disturbing Photo Sensor, operation problem
might be occurred)
4
OSD MENU STRUCTURE
SETUP MENU (page 1)
LENS
SHUTTER/AGC
WHITE BAL
BACKLIGHT
PICT ADJUST
ATR
MOTION DET
LENS
SHUTTER/AGC
AUTO ↵
MANUAL
AUTO↵
MANUAL↵
NEXT (page2)
EXIT
SAVE ALL
WHITE BALANCE
BACKLIGHT
ATW ↵
PUSH
USER 1↵
USER 2↵
ANTI CR
MANUAL
↵
PUSH LOCK
OFF
BLC
HLC
PICTURE ADJUST
↵
MIRROR
BRIGHTNESS
CONTRAST
SHARPNESS
HUE
GAIN
RETURN
ATR
MOTION DET
OFF
ON
↵
OFF
ON
↵
5
SETUP MENU (page 2)
PRIVACY
DAY/NIGHT
NR
CAMERA ID
LANGUAGE
CAMERA RESET
PRIVACY
DAY/NIGHT
OFF
ON
↵
COLOR
B/W↵
BACK (page 1)
EXIT
SAVE ALL
NR↵
NR MODE
Y LEVEL
C LEVEL
RETURN
CAMERA ID
OFF
ON
↵
LANGUAGE
ENGLISH
࢔ʩ‫׳‬
DEUTSCH
FRANCAIS
PYCCKNN
PORTUGUES
ESPANOL
CAMERA RESET
(return the camera to
factory defaults)
6
LENS
AUTO
TYPE (DC / VIDEO)
Sets the type of mechanical iris
(Video lens is not supported)
MODE (AUTO / OPEN / CLOSE )
Sets the type of control to be applied over the mechanical iris.
SPEED (0 – 255)
Sets the convergence speed of the mechanical iris.
MANUAL
Manual lens only
(Note: since Manual mode AUTO mode is changed SHUTTER/AGC to
SHUT+AUTO IRIS when MANUAL is changed to AUTO, AUTO MODE
should be changed to AUTO IRIS in SHUTTER/AGC)
SHUTTER/AGC
AUTO
HIGH LUMINANCE
MODE
(SHUT+AUTO IRIS / AUTO IRIS)
(Note: only SHUT can be selected if LENS is in MANUAL mode
SHUT+AUTO IRIS is AE (Auto Exposure) for SHUTTER is 1/500(1/480) and
IRIS)
BRIGHTNESS (0 ~ 255)
Adjusts the brightness
LOW LUMINANCE
MODE
(AGC / OFF)
Auto Gain Control on or off
BRIGHTNESS (x0.25 / x0.50 / x0.75/ x1.00)
Amount of AGC applied in low lighting conditions
MANUAL
MODE (SHUT+ AGC)
Auto gain control
SHUTTER
Select the shutter speed (1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000,
1/10000)
AGC
Sets the AGC gain applied [dB] for ME (manual exposure)
(6, 12, 18, 24, 30, 36, 42, 44.8 dB)
7
WHITE BAL
ATW (Auto Trace White balance)
SPEED (0~255)
Adjusts the pull-in speed of ATW.
DELAY CNT (0~255)
Sets the time-based hysteresis of ATW.
ATW FRAME (x0.5 / x1 / x1.5 / x2)
Sets the pull-in frame magnification.
ENVIROMENT (INDOOR / OUTDOOR)
Preset for either indoor or outdoor applications of the ATW
PUSH
Wide range Auto White Balance mode (AWB)
USER1 & 2
Both USER 1 & 2 can be individually set up for specific applications. The gain
values for the outdoor fixed mode are used as the adjustment items of USER1
on the internal OSD menu.
B-GAIN (0~255)
R-GAIN (0~255)
ANTI CR
Color rolling suppression
MANUAL
The B and R gain values for manual WB are set on this screen.
LEVEL (NTSC: 13 ~ 56), (PAL: 16 ~ 78)
PUSH LOCK
PUSHLOCK is selected and the Enter input is active
BACKLIGHT
Sharpens subjects with backlight (OFF / BLC / HLC)
PICT ADJUST
MIRROR
BRIGHTNESS
CONTRAST
SHARPNESS
HUE
GAIN
(OFF / ON) Horizontally inverts image.
(0~255) Sets the screen brightness.
(0~255) Sets the screen contrast.
(0~255) Sets the screen sharpness.
(0~255) Adjusts the hue.
(0~255) Adjusts the gain.
8
ATR
ATR (Adaptive Tone Reproduction) allows adjustment of the image to assist
with widely contrasting scenes of view.
LUMINANCE (LOW / MID / HIGH)
Sets the extent of the luminance compression
CONTRAST (LOW / MIDLOW / MID / MIDHIGH / HIGH)
Sets the extent of the contrast enhancement
MOTION DET
DETECT SENSE (0~127)
Sets the motion detection sensitivity (0=low sensitivity, 127=high sensitivity)
BLOCK DISP (OFF / ON / ENABLE)
Applies a Motion block trace in the selected area. To define the area, select
Enable and push centrally on the joystick. Use the Joystick to navigate to the
blocks you want to Disable and not include in motion trace. To return to the
menu, push and hold central joystick for 2secs and release.
MOTION AREA (ON / OFF)
Enables/disables the motion detection
AREA SEL (1~4)
MOTION DET
Selects the motion detection area
(Note: set the area sel it would be better
DETECT SENSE
IIIIIIIIIII 111
to move firstly BOTTOM and RIGHT)
BLOCK DISP
OFF
TOP (NTSC:0~244 , PAL:0~288)
MONITOR
AREA
0 = top
ON AREA SEL
1/4
BOTTOM (NTSC:0~244 , PAL:0~288)
TOP
IIIIIIIII
000
244(288) = bottom
BOTTOM
IIIIIIIII
076
LEFT
IIIIIIIII
000
LEFT (NTSC:0~474 , PAL:0~468)
RIGHT
IIIIIIIII 183
0 = left
RETURN
RIGHT (NTSC:0~474 , PAL:0~468)
474(468) = right
PRIVACY
AREA SEL (1~4)
Selects the motion detection area
AREA
AREA SEL
SEL
(Note: set the area sel it would be better
to move firstly BOTTOM and RIGHT)
TOP (NTSC:0~244 , PAL:0~288)
0 = top
BOTTOM (NTSC:0~244 , PAL:0~288)
244(288) = bottom
TOP
BOTTOM
LEFT
RIGHT
COLOR
TRANSP
MOSAIC
RETURN
9
1/4
IIIIIIIIII000
IIIIIIIIII077
IIIIIIIIII000
IIIIIIIIII187
1
1.00
OFF
LEFT (NTSC:0~474 , PAL:0~468)
0 = left
RIGHT (NTSC:0~474 , PAL:0~468)
474(468) = right
COLOR (1~8)
Sets the colors of the privacy zones.
TRANSP (0.00 / 0.50 / 0.75 / 1.00)
Sets the transparency of the privacy zone area if color is selected.
MOSAIC (OFF / ON)
Sets the mosaic function as the privacy to ON or OFF.
(Note: when ON, transparency needs to be set at 0.00 and privacy zones
can only be 1 color OR mosaic and not mixed)
DAY / NIGHT
COLOR (color only operation)
B/W (monochrome only operation)
BURST (OFF / ON)
Allows the color burst signal in monochrome to be removed if required.
IR OPTIMIZER (OFF / ON)
Smart IR mode OFF or ON
MODE (ONLY IR OPTIMIZER ON, AUTO / CENTER)
Auto: Histogram integration mode
Center: Center priority mode
LEVEL (ONLY IR OPTIMIZER ON, 0~31)
NR (2D-DNR)
This is used to remove noise from the image in low light conditions when
AGC is applied.
NR MODE (OFF, Y, C, Y/C)
Sets the 2D NR filter mode.
Y LEVEL (0-15)
Sets the Y filter (Luminance) strength.
C LEVEL (0-15)
Sets the C filter (Chrominance) strength.
10
CAMERA ID
Sets the camera ID to ON or OFF. A title of 52 characters per line can be
applied.
Use the joystick to navigate
the cursor. Pushing centrally
on the joystick will allow
selection of that character.
The arrows at the bottom
allow you to move the cursor
without changing the
character.
CLR
Inserts a space
POS
Allows you adjust the location of the camera ID title display. (if you move too
much right side or down, it might lose ID on the screen)
LANGUAGE
LANGUAGE select between:
English, Japanese, German, French, Russian, Portuguese & Spanish.
CAMERA RESET
CAMERA RESET - Returns the camera to the factory default settings.
SAVE ALL
SAVE ALL - Saves all the changes made in the menu.
EXIT
EXIT – Exits the menu and does not save changes made.
11
AUTO WHITE DEFECT
Push the left button for 5 seconds and enter Auto white defect menu.
Cover the lens and Enter for starting.
If white defects are over 65pcs, the camera is faulty and auto defect is
useless.
Over 70'C Auto white defect can't be activated.
LENS ADJUSTMENT
12
Art.
HCAM676B
HCAM675B
Lens
5 ~ 50 mm
2.8 ~ 12 mm
Angular
Field of
View
HORIZONTAL
51.5° ~ 6.5°
SPOT OUT / JOY STICK KEY
13
100.8 ° ~
23.7 °
EXTERNAL DIMENSIONS
14
SPECIFICATIONS
Power
General
Connector
& etc
MODEL
Power source
Power consumption
Image sensor
Total pixels
Effective pixels
Scanning system
Scanning frequency (H x V)
Sync. system
Electronic Shutter
Resolution
Min. illumination
LED range / Units
Video output
S/N ratio
Camera Control
ATR (Adaptive Tone
Reproduction)
Backlight
Day & Night
Smart IR
F
MD (Motion Detection)
U
PM (Privacy Masking)
N
WB (White Balance)
C
AGC (Auto Gain
T
Control)
I
Exposure
O Brightness
N
Contrast
Sharpness
HUE
Gain
NR (Noise Reduction)
Mirror
Power input
Video output
Lens
Operating temperature
Operating humidity
External dimension
Weight
NTSC
PAL
12VDC / 24VAC ±10%
5 W (450mA)
1/3″ SONY EXview HAD CCD II
1020 (H) x 508 (V)
1020 (H) x 596 (V)
976 (H) x 494 (V)
976 (H) x 582 (V)
2:1 Interlace
15,734 KHz x 59.94 Hz
15,625 KHz x 50 Hz
Internal
1/50 ~ 1/10000 sec
700TVL
0.15 Lux (Color) / 0 Lux (B/W)
40m / 45
1 Vp-p (75 ohm, composite)
50 dB (AGC OFF)
Internal OSD Key
LUMINANCE (L/M/H), CONTRAST(L/LM/M/MH/H)
OFF / BLC / HLC
AUTO
On / Off / Level
On (4 areas) / Off (Adjustable Size & Sensitivity)
0 ~ 4 zone
ATW / PUSH / USER1 / USER2
/ ANTI CR / MANUAL / PUSH LOCK
On / Off
Auto Iris / Auto Iris + Electronic Shutter
0 ~ 255 steps
0 ~ 255 steps
0 ~ 255 steps
0 ~ 255 steps
0 ~ 255 steps
OFF / Y / C / Y, C
ON / OFF
3-Pin terminal block
BNC connector
2.8~12mm (art. HCAM675B) / 5~50mm (HCAM676B)
Auto Iris Vari-focal lens (True D/N)
-10ºC ~ 50 ºC
0~96% (NON-condensing)
263.5 x 177.5 mm
950 g
15
Via Don Arrigoni, 5 24020 Rovetta S. Lorenzo (Bergamo)
http://www.comelitgroup.com e-mail:export.department@comelit.it
Download PDF

advertising