3590EGT3GD
3590EGT 3GD "TOUCH" : TOUCH SCREEN INDICATOR FOR ATEX 2 & 22
ZONES
Weight indicator with a big touch screen display,
for ATEX 2 & 22 areas classified at risk of
explosion. Protec on methods according to
ATEX II 3G Ex nR IIB T6 Gc X for gases
ATEX II 3D Ex tc IIIC T135°C Dc IP68 X for dust.
Suitable for advanced industrial applica ons, it's
fi ed with 3 serial ports, configurable printouts
and integrated alibi memory. CE-M approvable
(OIML R-76 / EN 45501).
The best solu on
for advanced industrial
applica ons
MAIN FEATURES
5,7' colour touch screen display
Multilanguage software
15-key alphanumerical waterproof keyboard
3-way control light
Selectable QWERTY, AZERTY o QWERTZ keyboard integrated in the touch screen
Stainless steel waterproof enclosure, with new IP68 protection system
Dimensions: 280x143x185mm
Suitable for use on the table, column or wall
Real time clock and permanent data storage
Fitted alibi memory, integrated on the motherboard
Slot for built-in micro SD for recording the configuration, logos, and customized screens (upon request)
Functions available with DINITOOLS utility
- Configuration, data entry and print formatting
- Recording and filing of all the information on PC
- Complete retrieval of the configuration
- Instrument calibration with numeric values
- Customization of the screens
24-bit A/D converter, 4 channels, up to 3200 conv./sec. and up to 8 signal linearisation points
4 independent analogue channels for reading of the weight
Connection with up to 16 analogue load cells of 350 Ohm (45 load cells of 1000 Ohm)
Up to 10.000e OIML or 3 x 3000e @ 0,3 µV/d CE-M legal for trade
Up to 1.000.000 displayable divisions for internal factory use, with internal resolution up to 3.000.000 points
Connectable to printers and labellers with free programmation of the printout formats
Power supply from 110-240Vac line or external rechargeable battery (recharge in safety zone).
MAIN CERTIFICATIONS
EC Type Approval (EN45501)
OIML R76
OIML R51 - MID
OIML R134 (AF09)
I/O SECTION
Two RS232 serial ports, for connection to printer, radio module, PC or PLC, badge reader or remote scale.
One RS485/RS232 serial port, for connection to printer, PC, PLC, or digital load cells.
4 optoisolated outputs, up to 16 with optional board.
2 optoisolated inputs, up to 8 with optional board.
Profibus interface to install in safety zone.
Analog output DAC16O needs the expansion board IOEXPB and it's only compatible to a bench mounting.
DETAIL 1
QWERTY keyboard integrated into the Touch Screen display.
SALES AND TECHNICAL ASSISTANCE SERVICE
All the specifications and images can be subject to variations and upgrades without prior notice.