GM-100 Series GM-100 Series SPECIFICATIONS Model Telescope Magnification / Resolving power Others Angle measurement Minimum Display Accuracy (ISO 17123-3:2001) Dual-axis compensator / Collimation compensation Distance measurement Laser output*1 Measuring range Reflectorless*3 (under average condiReflective sheet*5*6 *2 tions ) Mini prism One prism Minimum Display Accuracy*2 (ISO 17123-4:2001) (D=measuring distance in mm) Measuring time*4*9 GM-101 GM-102 GM-103 GM-105 30x / 2.5" Length : 171mm (6.7in.), Objective aperture : 45mm (1.8in.) (48mm (1.9in.) for EDM), Image: Erect, Field of view: 1°30' (26m/1,000m), Minimum focus: 1.3m (4.3ft.) Reticle illumination: 5 brightness levels 0.5"/1" (0.0001 / 0.0002gon, 0.002 / 0.005mil) 1" 1"/5" (0.0002 / 0.001gon, 0.005 / 0.02mil) 2" 3" Dual-axis liquid tilt sensor, working range: ±6' On/Off (selectable) 5" *1 IEC60825-1:Ed.3.0:2014/ FDA CDRH 21CFR Part1040.10 AND1040.11 *2 Average conditions: Slight haze, visibility about 20km (12 miles), sunny periods, weak scintillation. *3 With Kodak Gray Card White Side (90% reflective). When brightness on measured surface is 30,000 lx. or less. Reflectorless range/accuracy may vary according to measuring objects,observation situations and environmental conditions. *4 Good conditions: No haze, visibility about 40km (25miles), overcast, no scintillation. *5 When the measuring beam’s incidence angle is within 30º in relation to the reflective sheet target. *6 Measuring range in temperatures of 50 to 60°C (122 to 140°F): RS90N-K: 1.3 to 300m (4.3 to 980ft.), RS50N-K: 1.3 to 180m (4.3 to 590ft.), RS10N-K: 1.3 to 60m (4.3 to 190ft.) *7 Face the prism toward the instrument during the measurement with the distance at 10 m or less. *8 Measuring range:0.3 to 200m *9 Fastest time under good conditions, no compensation, EDM ALC at appropriate setting, slope distance. *10 Usage approval of Bluetooth wireless technology varies according to country. Please consult your local office or representative in advance. *11 No obstacles, few vehicles or sources of radio emissions/interference in the near vicinity of the instrument, no rain. *12 The laser-pointer and the guide light do not work simultaneously. *13 Figures will change depensing on the operating environment including temperatures and observation conditions. *14 In use of ECO mode. Fine single measurement every 30sec. Standard Package Components • Main unit • Battery (BDC70) • Battery charger (CDC68A) • Power Cable • Lens cap • Lens hood • Tool pouch • Precision Screwdriver • Lens brush • Hexagonal wrench (1.3 mm/2.5 mm)×2 • Cleaning cloth • Quick Manual • CD-ROM (Operation manual) • Laser caution sign-board • Carrying case • Carrying strap - Specifications may vary by region and are subject to change without notice. TOPCON CORPORATION <Contact to> Topcon Singapore Positioning Sales Pte Ltd 1 Jalan Kilang Timor, #09-01 Pacific Tech Centre, Singapore 159303 Phone: (+65)6778-3456 Fax : (+65)6773-6550 Email : firstname.lastname@example.org Web : www.topcon.com.sg ©2017 Topcon Corporation All rights reserved. P-233-1 TSP Geodetic Measurement Station Reflectorless mode : Class 3R / Prism/sheet mode : Class 1 0.3 to 800m (2,620ft.) / Under good conditions*4 : 1,000m (3,280ft.) RS90N-K: 1.3 to 500m (4.3 to 1,640ft.), RS50N-K: 1.3 to 300m (4.3 to 980ft.), RS10N-K: 1.3 to 100m (4.3 to 320ft.) 1.3 to 500m (4.3 to 1,640ft.) 1.3 to 5,000m (4.3 to 16,400ft) / Under good conditions*4 : 6,000m (19,680ft.) Fine : 0.0001m (0.001ft. / 1/16in.) / 0.001m (0.005ft. / 1/8in.) (selectable) Coarse : 0.001m (0.005ft. / 1/8in.) / 0.01m (0.02ft. / 1/2in.) (selectable) Tracking / Road : 0.01m (0.02ft. / 1/2in.) (2 + 2ppm x D) mm*8 (2 + 2ppm x D) mm (1.5 + 2ppm x D) mm 0.9s (initial 1.5s) 0.6s (initial 1.3s) 0.4s (initial 1.3s) Reflectorless*3 Reflective sheet*5*6 Prism*7 Fine Coarse Tracking OS, Interface and Data management Operating system Linux Display / Keyboard Graphic LCD, 192 x 80 dots, backlight, contrast adjustment / Alphanumeric keyboard / 28 keys with backlight Control panel location On both faces Trigger key Yes (right side) Data storage Internal memory Approx. 50,000 points Plug-in memory device USB flash memory (max. 32GB) Interface Serial RS-232C, USB2.0 (Type A for USB flash memory) Bluetooth modem (option)*10 Bluetooth Class 1.5, Operating range: up to 10m *11 General Green LED (524nm) and Red LED (626nm), Operating range: 1.3 to 150m (4.3 to 490ft.) Guide light*12 Laser-pointer *12 Coaxial red laser using EDM beam Levels Graphic 6’ (Inner Circle) Circular level (on tribrach) 10' / 2mm Plummet Optical Magnification: 3x, Minimum focus: 0.5m (19.7in.) from tribrach bottom Laser (option) Red laser diode (635nm±10nm), Beam accuracy: <=email@example.com, Class 2 laser product Dust and water protection / Operating temperature IP66 (IEC 60529:2001) / -20 to +60ºC (-4 to +140ºF) Size with handle 183(W)x 181(D)x 348(H)mm Instrument height 192.5mm from tribrach mounting surface Weight with battery & tribrach Approx. 5.3kg (11.7lb) Power supply - Specifications may vary by region and are Li-ion subject to change without notice. battery BDC70 Battery rechargeable *14 BDC70: Approx. 28hours Operating time (20ºC)*13 owned by Bluetooth SIG, Inc. and any use of such marks by Topcon is under license. - Bluetooth® word mark and logos are registered trademarks - Other trademarks and trade names are those of their respective owners. Application program TOPCON CORPORATION On board •REM Measurement •3D Coordinate Measurement •Resection •Stake Out 75-1 Hasunuma-cho, Itabashi-ku, Tokyo 174-8580, Japan Your•Topography local Authorized Dealer is: Observation •Offset Measurement •Missing Line Measurement Phone: (+81)3-3558-2993 Fax: (+81)3-3960-4214 www.topcon.co.jp •Surface Area Calculation •Route Surveying •Point to Line 75-1 Hasunuma-cho, Itabashi-ku, Tokyo 174-8580, Japan www.topcon.co.jp GM-100 Series - Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Topcon is under license. - Other trademarks and trade names are those of their respective owners. Your local Authorized Dealer is: Evolving Entry-Level Total Station • Construction and Survey Application Software On Board • Best-in-Class Measuring Distance Feature • Reliable Large Volume Internal Memory • Long-Hour Battery Operation • Strong Environmental Specification against Tough Sites GM Construction and Survey Application Software On Board Reliable All-Round Total Station Construction Coordinate Measurement Cross-Sectional Survey With coordinate measurement, you can manage 3D By using the MLM (Missing Line Measurement) program, the height difference between coordinate data so that various calculations such as points can be calculated for leveling. Also, you can save time on reflectorless mode to Road, Layout and more can be determined. 3D measure a number of points of variation in a large area. Boundary and Cadastral Survey coordinate data management can improve the productivity drastically. By using the Area function, you can calculate the area easily. Also, you can determine the center point of a column such as an electric pole, which cannot be directly measured by using offset calculation. A Elevation Stake Stake Out B Staking out with 3D coordinates, eliminates the E need to set up TS on the straight line for all The Guide Light function will navigate the prism operator to Topographic Survey elevation stakes. move to the stake out line quickly so that stake out The trigger key, or measuring distance key, helps you operation can be done effectively. perform topography quickly while continuously viewing through the telescope. Also, the long distance measuring C range reduces the number of the instrument changes for more efficient working time. D Distance Measurement Accuracy (Prism Mode) Accuracy Improve Topography and Stake GM Out 1.5mm+2ppm Previous with features to achieve faster Model and 2.0mm+2ppm more efficient workflows IoT Support System - Connect the Site and the Office TSshield IoT Support System Newly 1,000mClass EDM GM Designed High-End All Features are at Top Class Prism-Mode Reflectorless Accuracy 1.5mm+2ppm 2.0mm+2ppm Measuring Range 6,000m* 1,000m* * Good atmospheric condition Reliable Large Volume Memory Internal memory has 50,000 points to record. USB memory can be used up to 32GB. Distance Measurement Accuracy (Prism Mode) Accuracy GM Previous Model 1.5mm+2ppm Distance 1,000m GM Previous Model *This service may not be available in same areas. Superior Basic Feature will Expand Your Application Strong Environmental Spec The IP66 rating ensures durability for most any rough job site temperatures and conditions. Long-life Battery One battery (BDC70) lasts up to 28 hours, or about four days of normal operation time. 2.0mm+2ppm Measuring Range(Reflectorless Mode) 500m IoT • Remotely update the firmware via the internet. • Improves asset management by checking TS operating time. • Remote Lock secures the instrument from theft. • Monitor TS heath status to enable quick reaction against any functionality issues. Measuring Range(Reflectorless Mode) Distance Previouseffective in surveying control points that require high-accuracy, and in Especially 500m Model cross sectional surveying in large areas with reflectorless measurement mode. Survey Bright Illumination Key for Nighttime Work Key buttons are illuminated to minimze mistakes. Topcon Provides Japan Quality Products Topcon performs tough environmental tests to ensure long-term operation even under rough site environment. GM Series total stations are thoroughly inspected with dust-proof and water-proof test chambers. In addition, various tests against vibration, drop, temperature, and humidity were successfully passed to achieve the best environmental spec. Also, the measuring distance accuracy test on base line and the instrument leveling and angle accuracy test and adjustment by collimator system ensure your satisfaction on the GM Series product quality.