Manual - CLS LED

INDEX
CLS REVO T DMX
Manual
Version 1.4 February 2017
Index2
Installation Eutrac adapter
5
Safety information
Lens replacement
6
Content2
Programming / Magno Dim
7
Technical3
Lens index
9
Specifications3
Accessories10
Installation Global adapter
List of symbols
2
4
11
SAFETY INFORMATION
Qualified
technician
Ambiance
Max. 40º
Do not stare
into the LED
Make sure all
connectors are
connected
properly
Use a source
of AC power
that complies to
local electrical
codes
Block access
below the work
area when
maintaining
the unit
Don’t modify
or install
genuine parts
on this product
Disconnect the
power supply
before installing
or maintaining
Don’t install in
a flammable
or explosive
area
Warning!
Some surfaces
can be hot
CONTENT
Ceiling
360º
DRIVER
DRIVER
Included
Internal
270º
1,90 kg
50.000 h
8º
12º
30º
61º
12 x 46º
8x
Cree/Luxeon
IP20
2700K
3000K
Ceiling
360º
270º
6500K
Amber
Blue
DRIVER
DRIVER
Included
Internal
Red
Green
1,90 kg
50.000 h
8º
12º
100-240
VAC
Max.
20 Watt
DMX
dimmable
Magno
dimming
30º
61º
12 x 46º
8x
Cree/Luxeon
IP20
2700K
DMX
512
DMX
4000K
5000K
512
4000K
5000K
6500K
Amber
Blue
Red
Green
100-240
VAC
Max.
20 Watt
DMX
dimmable
Magno
dimming
www.cls-led.com
2
www.cls-led.com
3000K
TECHNICAL
INSTALLATION
With Global adapter
Eutrac adapter
1
110 mm
2
46 mm
46 mm
EUTRAC
84 mm
CLS Global
3-phase rail + data
175 mm
186 mm
100 mm
270º
Set the adapter
to the desired phase
by turning the wheel
100 mm
40 mm
4
3
100 mm
100 mm
# Y108511-B
# Y108511-G
# Y110935
# Y110938
Tools
SPECIFICATIONS
LED:
Available colours:
Lenses:
Power supply:
Power consumption:
Housing:
Weight:
IP value:
Measurements:
Ambient temperature:
T20
5
8 x Cree or Luxeon Rebel
Extra warm white 2700K, warm white 3000K, neutral white 4000K, fresh white 5000K
cold white 6500K, amber, royal blue and red
8º, 12º, 30º, 61º and 12x46º
100 ~ 240 VAC
Max. 20 Watt
Anodised aluminum
1,9 kg
IP20
175 x 116 x 100 mm (hxwxd)
-30º C till +40º C
3
Position
indicator
www.cls-led.com
4
www.cls-led.com
INSTALLATION
LENS REPLACEMENT
With Eutrac adapter
1
2a
2
1
CLS Eutrac
3-phase rail
+ data
Front plate
A
Glass
B
Lensholder
T20
90°- 0 - 90°
3
2b
3
# Y108155
4
1
3
4
2
Front plate
Glass
B
Lensholder
90°- 0 - 90°
T20
Make sure that
the items are clean
and the rubber
sealing is correctly
in place!
4
4x
Secure in
order
5
# Y108152
Position
indicator
5
www.cls-led.com
6
www.cls-led.com
PROGRAMMING
NOTE: The Magno Dimming function only works when no DMX is connected.
1
Via DMX the REVO Track can be configured. After setting the DMX to the desired values just hold the magnet on the REVO’s
backplate at the ‘bullseye’. Hold the magnet for approximately 3 seconds (step 3), when holding the magnet on the REVO it
will turn on and when programming has finished the REVO will turn off again. When the light does not turn off after 3 seconds
repower and try again.
Addressing
To configure address (1-255) set data on DMX channel 1:
0 = no changes are made.
1-255 = address is set to 1-255.
2
To configure address (256-508) set data on DMX channel 2:
0 = no changes are made.
1-253 = address is set to 256-508.
Examples:
Address 132 => set data 132 on DMX channel 1.
Address 278 => set data 23 on DMX channel 2.
# Y106015
Static brightness
When DMX fails or is not present the programmed brightness will become active.
To configure the static function set DMX channel 3 to the desired brightness.
0 = no changes are made.
1 = function disabled.
2-255 = brightness of the fixture.
Place the
magnet
at the indicated
‘bullseye’ on the
backplate
3
Soft dim option
When active the REVO Track will have soft dim curve.
To configure the soft dim function set data on DMX channel 4.
0 = no changes are made.
<127 = function turned off.
>127 = function turned on.
4
MAGNO DIMMING
Only works when no DMX is connected
To store the
configuration
hold the magnet
for 3 seconds
on the REVO
1. Place the magnet on the backplate, at the indicated spot.
2. The REVO starts slowly dimming from 100 – 1% in approx. 30 seconds.
The dimming is very accurate and precise, so steps are very small.
3. At the desired intensity level, take away the magnet.
4. After 10 seconds the REVO flashes one time, the value has been stored on the internal memory.
5. When powering up the REVO, the stored value will be recalled from the internal memory.
6. If you want to have a lower value, replace the magnet and the REVO dims further to lower levels.
To store the new setting repeat step 3 – 5.
7. If the REVO is being dimmed to Level 0 and you have not programmed a value, it will automatically
start at Level 100 and dim back from 100 - 1%.
7
www.cls-led.com
8
www.cls-led.com
LENS INDEX
ACCESSORIES
2
1
Superspot 8º
Spot 12º
3
4
Medium Flood 30º
ACCESSORIES Global
Global - black
Y108501-B CLS Global 3-phase rail + data 1 meter black
Y108502-B CLS Global 3-phase rail + data 2 meter black
Y108503-B CLS Global 3-phase rail + data 3 meter black
Y108504-B CLS Global 3-phase rail + data 4 meter black
Y108511-B CLS Global 3-phase rail + data end feed right, black
Y108512-B CLS Global 3-phase rail + data end feed left, black
Y108513-B CLS Global 3-phase rail + data middle feed black
Y108515-B CLS Global 3-phase rail + data L-coupler inner black
Y108516-B CLS Global 3-phase rail + data L-coupler outer black
Y110938
CLS Global 3-phase rail + data end cap black
ACCESSORIES
Eutrac - black
Y108112 CLS Eutrac 3-phase rail + data 1 meter black
Y108122 CLS Eutrac 3-phase rail + data 2 meter black
Y108132 CLS Eutrac 3-phase rail + data 3 meter black
Y108142 CLS Eutrac 3-phase rail + data 4 meter black
Y108152 CLS Eutrac 3-phase rail + data end feed right, black
Y108155 CLS Eutrac 3-phase rail + data end feed left, black
Y108158 CLS Eutrac 3-phase rail + data middle feed black
Y108162 CLS Eutrac 3-phase rail + data end cap black
Y108175 CLS Eutrac 3-phase rail + data L-coupler inner black
Y108178 CLS Eutrac 3-phase rail + data flex coupler black
Y108199 CLS Eutrac 3-phase + data monopoint black
Wide Flood 61º
Global - grey
Y108501-G
Y108502-G
Y108503-G
Y108504-G
Y108511-G
Y108512-G
Y108513-G
Y108515-G
Y108516-G
Y110935
CLS Global 3-phase rail + data 1 meter grey
CLS Global 3-phase rail + data 2 meter grey
CLS Global 3-phase rail + data 3 meter grey
CLS Global 3-phase rail + data 4 meter grey
CLS Global 3-phase rail + data end feed right, grey
CLS Global 3-phase rail + data end feed left, grey
CLS Global 3-phase rail + data middle feed grey
CLS Global 3-phase rail + data L-coupler inner grey
CLS Global 3-phase rail + data L-coupler outer grey
CLS Global 3-phase rail + data end cap grey
Eutrac - white
Y108133 CLS Eutrac 3-phase rail + data 3 meter white
Y108153 CLS Eutrac 3-phase rail + data end feed right, white
Y108163 CLS Eutrac 3-phase rail + data end cap white
Y106015 CLS Magnet pin (10 pcs)
5
Elliptical 12x46º
9
www.cls-led.com
10
www.cls-led.com
LIST OF SYMBOLS
Retail & Food LED modules
Clothing, furniture, kitchens,
jewellery, shoes, bread, meat,
fish & vegetables & fruit.
Protection class
One, two or three
Application area
Indoor or outdoor
Application area
Floor, wall or ceiling
Colour
Available colours;
Amber, blue, red or green
Swivel
Fixture is horizontally rotatable,
indicated in degrees
White colour temperature
In different Kelvin values;
Cold white, neutral white, warm
white or extra warm white
Swivel
Fixture is vertically rotatable,
indicated in degrees
h
ø
w
d
DRIVER
DRIVER
Included
External
Curve
Minimal bending curve
in centimeters
r
Multiple connection
Daisychain connectivity
Cutting length
Indicated by the
cutting marks
Installation depth
In centimeters
LED pitch
Pitch between the
LEDs in millimeters
Installation size
In centimeters
Power supply
In VDC, VAC or milliAmpere
Cable length
Maximum cable attached
to the fixture in centimeters
Power consumption
In VA or Watt
Driver
Inclusive or exclusive
Internal or external
Dimmable
1-10 Volt, Phase, individual,
DMX dimmable or DALI
Weight
In grams/kilograms
Bluetooth controlled
By Casambi
Pressure
Maximum pressure on
the fixture in kg/cm2
Magno dimming
Accurate dimming from
100 - 1% by using a magnet
Lifespan
Of the light source in hours
Dynamic Control
Dynamic Power Control or
Dynamic Temperature Control
Lenses
Availble lenses,
indicated in degrees
DMX
512
DMX input
Fixture works on DMX512
protocol
Combined product
Compose your own fixture
LEDs
Kind of LED used in the
fixture
Warranty
3 or 5 years warranty on
the product
Plug & play
Easy connection using the
SmartConnect system
Conformité Européenne
CE marking for free marketability
of industrial goods within the EU
IP value
Ingress Protection classifies the
degrees of protection provided
against the intrusion of the product
Energy label
Colour changing
RGB, RGB-W, RGB-A,
AWB or Tunable White
Lightsource
Equipped with a Citizen or a Xicato
LED module
11
www.cls-led.com
2017 CLS-LED BV. All rights reserved. Information subject to change without notice, CLS-LED BV and all affiliated companies
disclaim liability for injury, damage direct or indirect loss, consequential or economic loss or any other loss occasioned by
the use of, inability to use or reliance on the information contained in this manual. No part of this manual may be reproduced,
in any form or by any means, without permission in writing from CLS-LED BV. Other legal information can be found in our
General conditions,found on the back of your CLS-LED BV invoice, inside the CLS catalogue or on our website
www.cls-led.com/General-Terms.pdf
12
www.cls-led.com