Catalogue 2017
INNOVATION
AT THE
SERVICE OF
NATURE
Garland • 2
Índex
Vacuum cleaner water/powder (electric) CLEAN - ASH
148
Driller (petrol) - DRILL
146
Swepers-artificial lawn combers (electric) COMBER
80
Wood chipper (petrol and electric) CHIPPER
68
Water pumps (petrol and electric) AMAZON-GEISER-PRESS
Arm support ARM
58
Log splitters (electric) CHOPPER
28
Trimmers (petrol and electric) XTRIM
46
Lawn mowers (petrol and electric) GRASS 84
Hedge trimmers (petrol and electric) SET
62
Brushcutters (petrol and electric) BEST - NIPON
34
Scarifiers (petrol and electric) SCAR
74
Sprayers (petrol and electric) ATOM - FUM
130
Generators BOLT
136
High pressure washers (petrol and electric) ULTIMATE
106
Tillers (petrol and electric) MULE
96
Cultivator (petrol) CULTIVATOR 92
Chainsaws (petrol, electric and pole chainsaws) MONTANA - BULK
14
Nebulizer (electric) FOGGY
112
Snow cleaners (petrol) SNOW
154
Blowers and vacuum cleaners (petrol, electric and cordless) GAS 124
Welders (electric) SPARK
142
Olive shakers (petrol and electric) SHAKER
Accessories
116
52
158
Garland • 3
INNOVATION
AT THE
SERVICE OF
NATURE
Garland • 14
CHAINSAWS
Chainsaws (petrol)
Strength,
confidence and
precision cutting
MORE PLEASANT AND PRODUCTIVE WORK
When dealing with a task, there is nothing like being able to rely on a tool that meets
your highest expectations as the Garland petrol chainsaws. We empower our models
with stringent security measures, reinvent our machines to make increasingly powerful,
lightweight and handy state of the art components for a thorough, efficient and
successful work. We offer a variety of models with different features, for you to choose
the most appropriate.
Garland • 15
INNOVATION
AT THE
SERVICE OF
NATURE
CHAIN
Equipped with Japanese steel.
Large chromed
tooth chain.
• Quality chain
• Offers a great
cutting performance
CLAW
Provides more
control
when cutting.
BAR
High quality steel Bar.
Advantages
CI
CYLINDER
(HIGH PERFORMANCE)
AF
Soft start to prevent sudden
jerks when starting.
High performance cylinder
more power, 30% more
durability and increased
efficiency.
CP
PRIMER “FIRST”
(FAST COLD START)
Efficient “primer” bulb, which
pumps fuel to the carburetor
making a cold start up, easier.
Garland • 16
EASY START
AV
ANTI-VIBRATION SYSTEM
Anti vibration system that
reduces fatigue and makes
the tasks less
demanding.
CHAINSAWS
EASY GRIP ERGONOMIC HANDLE
Made of aluminum alloy and covered with rubber for a safe,
comfortable and ergonomic grip.
ERGONOMIC STARTER
HANDLE
CLEAN AIR SYSTEM
Prevents dust from
entering the engine
through the air filter.
SAFETY TRIGGER
It prevents accidental
acceleration.
ANTI-VIBRATION SYSTEM
Anti vibration system that
reduces fatigue and makes
the tasks less demanding.
OIL/PETROL CAPS
Easy opening and tightening system.
FC
EA
CHAIN BRAKE
Stops the machine
immediately when it detects
a kickback, improving safety.
AUTOMATIC GREASING
Practical system of permanent
self lubrication of the chain.
For optimal performance.
LL
KEY ALWAYS LOCATED
Useful storage compartment
for the tensing key, bar and
chain cover and spark plug,
available when needed.
CM
MAGNESIUM CRANKCASE
Carter much lighter and
better heat dissipation.
Garland • 17
INNOVATION
AT THE
SERVICE OF
NATURE
MONTANA 1420 (40G-0111)
This saw has the most powerful engine in its class. In addition,
its long bar allows greater working scope. Equipped with a
high-performance cylinder for durability and a lighter
magnesium carter for a higher heat dissipation. Walbro
carburetor manufactured in Japan and a chain manufactured
in USA. Also it is specially designed for intensive pruning and
felling.
TECHNICAL CHARACTERISTICS
INTENSIVE WORK
INTENSIVE WORK
MONTANA 1620 (40G-0112)
Specially suitable for chopping and demolition, thanks to its
20”/ 50 cm. bar and efficient 2-stroke high performance
engine. It also has a high performance cylinder for durability
and magnesium carter for more heat dissipation. Walbro
carburetor manufactured in Japan and an Oregon chain
manufactured in USA. Antivibration system to make work more
comfortable, chain brake and automatic chain greasing.
TECHNICAL CHARACTERISTICS
Engine 2 stroke Garland
Engine 2 stroke Garland
Displacement 64,1 cc.
Displacement 59 cc.
Power 3,3 kW/4,5 CV
Power 3,0 kW/4,1 CV
Bar Length 20”/50 cm
Bar Length 20”/50 cm
Type of chain (pitch/thickness) 3/8” - 0,058”
Type of chain (pitch/thickness) 3/8”- 0,058”
Number of links 72
Number of links 72
Weight 5,9 kg*
Weight 5,8 kg.*
CI
CYLINDER
CM MAGNESIUM CRANKCASE
Garland • 18
AV
ANTI-VIBRATION SYSTEM
FC
CHAIN BRAKE
EA
AUTOMATIC GREASING
CI
CYLINDER
CM MAGNESIUM CRANKCASE
AV
ANTI-VIBRATION SYSTEM
FC
CHAIN BRAKE
EA
AUTOMATIC GREASING
* Net weight without bar and chain
This powerful model features an efficient 2-stroke 54.5 cc.
engine. The strength of a 3/8”/0.058 “ thick chain, magnesium
crankcase, high performance cylinder and reinforced starter.
Perfect for thick branches and demolition work with its 18” bar.
TECHNICAL CHARACTERISTICS
INTENSIVE WORK
INTENSIVE WORK
MONTANA 1016 (40G-0113)
This saw has a 2-stroke 49.3 cc engine, and a 2.0 kW. power,
magnesium crankcase, high performance cylinder, reinforced
starter, along with a 16”/40 cm bar. which allows a perfect and
fast cut. It includes anti-vibration system and chain brake.
TECHNICAL CHARACTERISTICS
Engine 2 stroke Garland
Engine 2 stroke Garland
Displacement 54,5 cc.
Displacement 49,3 cc.
Power 2,2 kW/3,0 CV
Power 2,0 kW/2,7 CV
Bar Length 18”/45 cm
Bar Length 16”/40 cm
Type of chain (pitch/thickness) 3/8”-0,058”
Type of chain (pitch/thickness) 0,325”-0,058”
Number of links 64
Number of links 66
Weight 5,35 kg.*
Weight 5,35 kg.*
CI
CM
CYLINDER
MAGNESIUM CRANKCASE
AV
ANTI-VIBRATION SYSTEM
FC
CHAIN BRAKE
EA
AUTOMATIC GREASING
CI
CM
CYLINDER
MAGNESIUM CRANKCASE
AV
ANTI-VIBRATION SYSTEM
FC
CHAIN BRAKE
EA
AUTOMATIC GREASING
MONTANA 718-V16 (40G-0117)
Specially suitable for chopping and demolition, thanks to its
18 “/ 45 cm bar. 2-stroke high-performance engine, 72 strong
chain links enable a faster and effective cut. With anti-vibration
system, chain brake, automatic greasing system, easy start
and primer “bulb” that helps the machine to start up easily
from cold.
TECHNICAL CHARACTERISTICS
Engine 2 stroke Garland
Displacement 45 cc
Power 1,7 kW./2,3 CV
Bar Length 18”/45 cm
Type of chain (pitch/thickness) 0.325”- 0,058”
Number of links 72
Weight 5,3 kg.*
CP
PRIMER
AV
ANTI-VIBRATION SYSTEM
AF
EASY START
FC
CHAIN BRAKE
* Net weight without bar and chain
EA
AUTOMATIC GREASING
Garland • 19
CHAINSAWS
MONTANA 1218 (40G-0114)
INNOVATION
AT THE
SERVICE OF
NATURE
MONTANA 516 (40G-0101)
This machines powerful 2-stroke engine is perfect for
chopping wood. Low profile 3/8” chain, anti-vibration system,
chain brake and automatic lubrication. It also includes easy
start system and primer bulb that helps cold start ups.
TECHNICAL CHARACTERISTICS
Engine 2 stroke Garland
Displacement 40,1 cc.
Power 1,7 kW/2,3 CV
Bar length 16”/40 cm
Type of chain (pitch/thickness) 3/8” LP - 0,050”
Number of links 56
Weight 4,2 kg.*
CP
PRIMER
AF
EASY START
AV
ANTI-VIBRATION SYSTEM
EA
AUTOMATIC GREASING
FC
CHAIN BRAKE
LL
KEY ALWAYS LOCATED
MONTANA FIRST (40G-0100)
Its 14“ bar can chop logs, prune faster in a very compact
format. It has a sturdy 3/8” low profile chain and also has easy
start system, primer “bulb“ for cold start ups, automatic chain
lubrication and chain brake system.
TECHNICAL CHARACTERISTICS
Engine 2 stroke Garland
Displacement 37,2 cc.
Power 1,5 kW/2,0 CV
Bar Length 14”/35 cm
Type of chain (pitch/thickness) 3/8”-0,050”
Number of links 52
Weight 4,2 kg.*
Garland • 20
CP
PRIMER
AV
ANTI-VIBRATION SYSTEM
EA
AUTOMATIC GREASING
AF
EASY START
FC
CHAIN BRAKE
LL
KEY ALWAYS LOCATED
* Net weight without bar and chain
CHAINSAWS
PRUNING CHAINSAWS
Chainsaws with a special design looking for the minimum weight, the maximum handling capacity and that can be used
with one hand. they are the ideal machines for pruning in height in which the user has to climb the tree with harness and
ropes and where he needs to be able to have a hand available, or for the pruning of fruit trees in which it is necessary to
make a great amount of cuts of small branches.
MONTANA 110 J-V16 (40G-0121)
MONTANA 110-V15 (40G-0102)
. Its small size allows for quick and effective workouts. Its 10
“carving bar allows you to reach the most inaccessible fruit tree
branches allowing you more accurate work without damaging
other branches of the tree.It has a primer bulb for cold start up,
anti-vibration system that reduces fatigue, chain brake should
kick back occur and automatic chain lubrication to operate
smoothly.
Comfortable and lightweight chainsaw, specially designed for
pruning. Its 10 “round bar makes it ideal for pruning branches
up to 10cm in diameter. It has a primer bulb for cold start up,
anti-vibration system that reduces fatigue, chain brake should
kick back occur and automatic chain lubrication to operate
smoothly.
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
Engine 2 stroke Garland
Engine 2 stroke Garland
Displacement 25,4 cc
Displacement 25,4 cc
Power 0,8 kW/1,1 CV
Power 0,8 kW/1,1 CV
Bar Length 10”/25 cm
Bar Length 10”/25 cm
Type of chain (pitch/thickness) 1/4” - 0,050”
Type of chain (pitch/thickness) 3/8” BP - 0,050”
Number of links 60
Number of links 40
Weight 3,8 kg*
Weight 3,8 kg*
CP
PRIMER
AV
ANTI-VIBRATION SYSTEM
FC
CHAIN BRAKE
EA
AUTOMATIC GREASING
* Net weight without bar and chain
CP
PRIMER
FC
CHAIN BRAKE
AV
ANTI-VIBRATION SYSTEM
EA
AUTOMATIC GREASING
Garland • 21
INNOVATION
AT THE
SERVICE OF
NATURE
Garland • 22
CHAINSAWS
Chainsaws (electric)
Perfect little
machines
MANAGEABLE, ACCURATE AND ECOLOGICAL
If you could design the ideal chainsaw for your tasks, it would be similar to this range.
Docility and efficiency of our electric saws allow even amateur users to, perform work
with a professional finish. Its accuracy reproduces the exact cut you want when branch
pruning or hedge cutting. Light weight, high security and durability makes them the
perfect choice and, last but not least, these macnines do not produce emissions and
thus they look after our surrounding environment.
Garland • 23
CLAW
INNOVATION
AT THE
SERVICE OF
NATURE
Provides greater control
facilitating cutting maneuver.
SOFT GRIP
The non-slip handle guarantees
perfect handling and total control
of the machine.
REAR HANDLE
For safety.
Large chromed
tooth chain.
• Quality chain
• Offers a great
cutting performance
Advantages
EA
AUTOMATIC GREASING
FC
Stops the machine
immediately when it
detects a kickback,
ensuring complete safety.
Practical system for
permanent self- lubrication of
the chain. For optimal
performance .
I
SECURITY SWITCH
Simple and effective
mechanism that prevents
involuntary start up of the
machine .
Garland • 24
CHAIN BRAKE
NA
OIL LEVEL INDICATOR
Visual oil lever indicator.
ERGONOMIC HANDLE EASY GRIP
The side handle allows to work in different
conditions to ensure the perfect balance for
use in any position.
Its powerful engine allows large workloads with minimal effort.
it is also equipped with everything needed for a comfortable
and secure professional work : oil automatic chain , chain
brake , level of visible oil, sds system (tensioning mechanism
and tool free chain change) , safety switch and overload system
( surge protector).
CHAIN
Equipped with
Japanese steel chain.
TECHNICAL CHARACTERISTICS
Engine electric 230 V ~ 50 Hz
Power 2.400 W
Bar length 18”/45 cm
Type of chain (pitch/thickness) 3/8” LP-0,050”
Automatic mechanical oil pump
Number of links 62
Weight 5,6 kg
EA
I
AUTOMATIC GREASING
FC
CHAIN BRAKE
SEGURITY SWITCH
NA
OIL LEVEL INDICATOR
S
SDS SYSTEM
O
OVERLOAD
BULK FIRST E-V15 (40EL-0038)
Specially suitable for DIY, cutting branches and chopping
wood. Very safe, thanks to its safety switch. With automatic
chain lubrication for smooth operation, and window to see the
oil level.
BAR
Equipped with quality steel.
S
SDS SYSTEM
Convenient system designed
to tighten and change the
chain quickly and easily,
without tools .
TECHNICAL CHARACTERISTICS
Engine electric 230 V ~ 50 Hz
Power 2.000 W
Bar length 16”/40 cm
Type of chain (pitch/thickness) 3/8” LP-0,050”
O
OVERLOAD SYSTEM
Automatic mechanical oil pump
(SURGE PROTECTOR)
Number of links 57
Efficient protection system
against any variation of the
electric current.
Weight 5 kg
EA
I
AUTOMATIC GREASING
FC
CHAIN BRAKE
SEGURITY SWITCH
NA
OIL LEVEL INDICATOR
Garland • 25
CHAINSAWS
BULK 518 E-V15 (40EL-0043)
INNOVATION
AT THE
SERVICE OF
NATURE
Garland • 34
Brushcutters (petrol and electric)
BRUSHCUTTERS
Say goodbye to
the weeds
ERGONOMIC WITH GREAT POWER AND STRENGTH
Garland expands its range of brush cutters and innovates to finally win the battle
against the weeds. Among our models you will find, new, efficient and comfortable
machines with delta handle. Handle design that allows effortless working access to
most unaccessible places, and provides greater stability to clear slopes. A new option
for the user to choose from.
Discover a range of models, with Japanese engines, different displacements and a
wide variety of accessories.
Garland • 35
INNOVATION
AT THE
SERVICE OF
NATURE
ERGONOMIC HANDLE
Secure grip design.
HIGH PERFORMANCE HANDLES
You can choose from a range of handles:
GEARS
Double bike handle and delta handle.
Heavy duty gear created to
withstand the most severe
working conditions.
GUARDS
Resistant protective and easily
replaceable.
Advantages
CP
PRIMER BULB
(EASES COLD STARTUPS)
28
Efficient primer bulb,
which pumps fuel to the
carburetor engine,
favoring cold startups.
AV
ANTI-VIBRATION SYSTEM
Decisive anti-vibration
system that reduces
fatigue and makes your tasks
easier.
Garland • 36
TRANSMISSION BAR WITH
28 MM DIAMETER
The thickness of the
transmission bar provides
more firmness for the most
demanding tasks.
90
DOUBLE ADJUSTABLE BIKE
HANDLE
Double bike handle for
comfortable use and a firmer
grip. Swiveling 90° for easy
transportation and storage.
Engine stop on the handle for quick
and easy stoppage.
BRUSHCUTTERS
STOP ENGINE SWITCH
IN THE HANDLE
PROTECTING SPARK
PLUG COVER
It protects the spark plug and
allows easy cleaning and
replacement.
FUEL TANK WITH VISOR
It allows the operator to easily check the fuel level before
starting work. The vertical position makes it easier to fill.
MJ
TD
JAPANESE ENGINE
Honda or Kawasaki engines.
PARTITIONED
TRANSMISSION
Partitioned transmission allows
you to add other accessories
such as pruner and hedge
cutter accessories (depending
on model). It also facilitates
transport and storage.
TP
PREMIUM TRANSMISSION
The tube thickness of 36 mm
added to more reinforcement at the
top end of the machine reduce
vibration when working. This, plus
the bottom end transmission tube
with a thickness of 28 mm provides
more resistance.
D
DELTA HANDLE
Ideal for brushcutting in difficult
accessible places and in slopes
providing more stability.
Garland • 37
4 STROKE BRUSHCUTTERS
INTENSIVE WORK
Ecological, comfortable and efficient. The 4-stroke engine brushcutters have lower emission levels than 2-stroke engines
so they are more environmentally friendly. Its engine works at lower revolutions producing less noise and vibrations that
mean a greater comfort of use for the operator and minor annoyances to third persons who may be near the work area.
Another great advantage of these engines is that they work with gasoline without mixing since they use the oil of the
crankcase to achieve a lubrication of all the components that guarantees the perfect maintenance of all the movable
parts.
NIPON 620 QH-V16 (41-0144)
BEST 524 QG-V16 (41-0152)
4-stroke brushcutter with
4-stroke honda engine. light and
powerful machine that, along
with the advantages of carrying
a 4-stroke engine, has
anti-vibration system, 28mm
transmission, adjustable
ergonomic foldable handlebar
includes 3-teeth disc, nylon
bump-head, double professional
harness.
4-stroke brushcutter with 4-stroke
Garland engine. Comfortable
and manoeuvrable machinery
that, along with the advantages
of a 4-stroke engine, has an
anti-vibration system, 28 mm
transmission, adjustable and
folding ergonomic handlebar.
Includes 3-teeth disc, nylon
bump-head, double
professional harness, shin
guards and protective face
shield.
90º
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
Engine 4 stroke Honda
Engine 4 stroke Garland
Displacement 35,8 cc
Displacement 31 cc
Power 1 kW/1.4 CV
Power 0,8 kW/1,1 CV
Handlebar type bike
Handlebar type bike
Type of harness double
Type of harness double
Weight 6,6 kg
Weight 6,5 kg
CP
PRIMER
AV
ANTI-VIBRATION SYSTEM
Garland • 40
28
28 MM TRANSMISSION BAR
90
90º ADJUSTABLE HANDLE
MJ
JAPANESE ENGINE
CP
PRIMER
28
28 MM TRANSMISSION BAR
AV
ANTI-VIBRATION SYSTEM
90
90º ADJUSTABLE HANDLE
90º
BEST 921 G-V15 (41-0122)
BRUSHCUTTERS
2-stroke engine brush cutter with
51.6 cc. and 1.46 kW. power.
Has primer bulb that helps in
cold startups. Double adjustable
handle to facilitate a more comfortable grip on each leg and 28
mm transmission bar. It incorporates an innovative
system that eliminates vibration
and fatigue. Also includes nylon
bulb head, steel disc and
harness.
90º
TECHNICAL CHARACTERISTICS
Engine 2 stroke Garland
Displacement 51,6 cc
Power 1,46 kW/2,0 CV
Handlebar type bike
Type of harness double
Weight 8,4 kg
CP
PRIMER
28
28 MM TRANSMISSION BAR
AV
ANTI-VIBRATION SYSTEM
90
90º ADJUSTABLE HANDLE
BEST 721 G-V15 (41-0139)
2-stroke 42.7 cc. engine ,
lightweight, a primer bulb for
easy startup, anti-vibration
28 mm. transmission bar,
nylon bump head, steel disc,
ergonomic handle and harness.
The perfect assistant for our
garden.
90º
TECHNICAL CHARACTERISTICS
Engine 2 stroke Garland
Displacement 42,7 cc
Power 1,25 kW/1,7 CV
Handlebar type bike
Type of harness double
Weight 7,7 kg
CP
PRIMER
28
28 MM TRANSMISSION BAR
AV
ANTI-VIBRATION SYSTEM
90
90º ADJUSTABLE HANDLE
Garland • 41
BEST 521 G-V15 (41-0132)
With a light 32.6 cc. 2-stroke
engine , Primer bulb for cold
startups, double adjustable
handle, anti-vibration system,
nylon bump head, harness
and steel disc. Because it has
everything, it has become a
leader in sales.
90º
TECHNICAL CHARACTERISTICS
Engine 2 stroke Garland
Displacement 32,6 cc
Power 0,9 kW/1,2 CV
Handlebar type bike
Type of harness double
Weight 7 kg
CP
PRIMER
AV
ANTI-VIBRATION SYSTEM
90
90º ADJUSTABLE HANDLE
BEST 321 G (41-0115)
A high quality machine with
outstanding features (light
engine, ergonomic, quick start
system) with a singular
price. Also includes nylon
bump head, steel disc and
harness. Certainly a good
choice.
TECHNICAL CHARACTERISTICS
Engine 2 stroke Garland
Displacement 25,4 cc
Power 0,75 kW/1,0 CV
Handlebar type bike
Type of harness double
Weight 6,5 kg
Garland • 42
CP
PRIMER
AV
ANTI-VIBRATION SYSTEM
90
90º ADJUSTABLE HANDLE
90º
BEST 310 DPG-V15* (41-0127)
Versatile convertible trimmer
through its accessories.
The lightweight engine makes it
very handy in any position and
significantly reduces fatigue thanks
to its anti-vibration system.
Facilitates cold start through its
primer bulb. Facilitates transport
and storage thanks to its
partitioned transmission. Delta
handle, nylon bump head, steel
disc, harness, trimmer and an
extension 70 cm. attachment giving
it a 2.90 m. reach to assist in the
tasks of difficult access.
This versatile tool becomes a
hedge trimmer, a pruner and an
olive shaker through its optional
accessories. The lightweight
engine makes it very handy in any
position. Significantly reduces user
fatigue through its anti-vibration
system. Facilitates cold start up
thanks to its primer bulb.
Partitioned transmission for easy
transport and storage. Delta handle
nylon bump head and
steel disc.
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
Engine 2 stroke Garland
Engine 2 stroke Garland
Displacement 32,6 cc
Displacement 25,4 cc
Power 0,9 kW/1,2 CV
Power 0,75 kW/1,0 CV
Handlebar type delta
Handlebar type delta
Bar Length (trimmer accessory) 10”/25 cm
Type of harness shoulder harness
Step chain and thickness 3/8”/0,050” LP
Weight 5,2 kg
BRUSHCUTTERS
BEST 510 DPG-3 EN 1* (41-0136)
Length(extension accessory) 70 cm
Type of harness shoulder harness
Weight 5,9 kg
CP
PRIMER
AV
ANTI-VIBRATION SYSTEM
TD
D
PARTITIONED TRANSMISSION
DELTA HANDLE
CP
PRIMER
AV
ANTI-VIBRATION SYSTEM
TD
D
PARTITIONED TRANSMISSION
DELTA HANDLE
* See also optional accessories BEST 310 DPG.
* PRUNER ACCESORY
* HEDGE CUTTER ACCESSORY
* SHAKER ACCESORY
CS BEST 310/510-V15
HT BEST 310/510-V15
SH BEST 310/510-V16
(PV-5431)
(PV-5432)
(PV-5586)
Practical pruning accessory.
The BEST CS 310 has an effective
cutting 10”/25 cm blade. Perfect for
pruning branches.
This trimmer accessory combines the
best qualities to ease hedge cutting
tasks. Cutting length of 39 cm. covering
maximum area. The width between
teeth is 18 mm. which favors a more
productive cutting . The hedge cutting
can be done at several angles with
its 90° adjustable head to reach all
places.
Effective accessory for shaking
branches without any effort. It consists
of 6 durable carbon rods, performing
1,000 strokes per minute.
* Optional accessories for the BEST 310/510 DPG not included.
Garland • 43
INNOVATION
AT THE
SERVICE OF
NATURE
Garland • 44
* PRUNER ACCESSORY
BRUSHCUTTERS
Light,
silent,
ergonomic
OPTIMAL PERFORMANCE
With the ability to cut grass, undergrowth and small
shrubs with the simplicity of a low maintenance electric
engine, these brushcutters are ideal for maintenance of
small areas.
CS BEST 100-V15* (PV-5495)
Practical pruning accessory. The BEST CS 310 has an
effective cutting 10”/25 cm blade. Perfect for pruning
branches.
BEST 100 DPE-V15 (41-0133)
* HEDGE CUTTER ACCESSORY
Possibility of 4 functions in one
with a powerful 1,000W
engine . Partitioned
transmission allows optional
accessories to carry out other
tasks apart from brush cutting,
also hedge cuts and prunes just
adding the optional accessory.
Its partitioned transmission is
useful for easy transport and
storage. It includes nylon bump
head, harness and steel disc.
HT BEST 100-V15* (PV-5494)
TECHNICAL CHARACTERISTICS
Engine electric 230 V ~ 50 Hz
Power 1.000 W
Handlebar type delta
Type of harness shoulder harness
Weight 4,78 kg
TD
D
PARTITIONED TRANSMISSION
DELTA HANDLE
P.S.P. 157 EUROS
This trimmer accessory combines the best qualities
to ease hedge cutting tasks. Cutting length of 39 cm.
covering maximum area. The width between teeth is
18 mm. wich favors a more productive cutting . The
hedge cutting can be done at several angles with its
90° adjustable head to reach all places.
* Optional accessories for BEST 100 DPE-V15
not included.
Garland • 45
INNOVATION
AT THE
SERVICE OF
NATURE
Garland • 46
Trimmers (petrol and electric)
TRIMMERS
Turn a beautiful
lawn into a
superb lawn
ERGONOMIC AND LIGHTWEIGHT
Using the lawnmower is just the first step, but a good work is not perfectly finished until
the grass edges are impeccable. With our range of electric and petrol lawn edgers it
is so easy to go over the edges with results that become noticeable. You have a wider
range of tools with different powers and designs, all of them offer an exceptional
handling and a great performance to leave a perfect lawn.
Garland • 47
INNOVATION
AT THE
SERVICE OF
NATURE
ADJUSTING LEVER
It regulates the height.
BLADE
Blade located in the guard to
cut the surplus mowing line and
adjust the cutting diameter to the
maximum the machine allows.
Advantages
CP
“PRIMER” BULB
(FOR COLD START UPS)
RT
Advantageous telescopic
adjustment that lets you
adjust the ideal height, at
any moment, so that you
can work easily.
Efficient Primer “bulb”,
which pumps fuel into the
engine carburetor, facilitating
cold start ups.
CA
TAP & GO
(SELF-SUPPLIED HEAD)
Ingenious and practical
mowing line feeder that is
operated by tap pressure.
Garland • 48
TELESCOPIC ADJUSTMENT
ER
ADJUSTABLE HANDLE
Ergonomic adjustment of
the handle to take hold of
the machine easily.
TRIMMERS
AUTOMATIC 2 LINE HEAD
Practical 2 line head with
automatic line outflow by
pressure.
SOFT GRIP
The ergonomically designed
grip is soft and easy to hold for
a fast and safe grip.
GUARD
Avoid that grass debills and
stones impact on the user.
TD
REMOVABLE
Its removable transmission
facilitates its transport and
storage.
Garland • 49
INNOVATION
AT THE
SERVICE OF
NATURE
Access
difficult
cutting
areas
THE PERFECT FINISH
Designed specifically for lawn mowing areas that a lawn
mower cannot access as meadow edges next to walls,
curbs or trees. Gives the perfect finishing to the lawn
after the work of the lawnmower.
XTRIM FIRST PG (46-0024)
It is no longer necessary to
be strong to handle a petrol
lawn-edger, it is only necessary
to want a perfect garden and
operate the new XTRIM FIRST
PG in every corner. Its power and
great lightness make work easier,
obtaining, with less effort, a great
result.
TECHNICAL CHARACTERISTICS
Engine 2 stroke Garland
Displacement 22 cc
Power 0,5 kW/0,7 CV
Head type 2 lines
Cutting length 38 cm
Weight 3,95 kg
Garland • 50
CP
“PRIMER” BULB
ER
ADJUSTABLE HANDLE
CA
TAP & GO
TD
ADJUSTABLE HANDLE
XTRIM 700 PE-V16 (46-0027)
TRIMMERS
The most powerful of our
lawn-edgers, it is also the most
versatile. Its removable designed
transmission makes its transport
and storage easier. Its efficient
1,000W electric engine is placed
at the top to make it easier
to operate and its adjustable
handle increases the comfort
when it is used.
TECHNICAL CHARACTERISTICS
Electric motor 230 V ~ 50 Hz
Power 1.000 W
Head type 2 lines
Cutting length 35 cm
Weight 4,78 kg
CA
TAP & GO
TD
REMOVABLE
ER
ADJUSTABLE HANDLE
XTRIM 365 E-V16 (46-0029)
Because of its incomparable
performance, this model adapts
to any tasks like no other.
Convertible design that adopts
up to 4 different positions to
reach any corner easily and
efficiently. Adjustable handle for
an ideal grip. Height regulation
that adapts to the user’s comfort.
And a 180° angle to shape and
leave no blade of grass without
trimming.
TECHNICAL CHARACTERISTICS
Electric motor 230 V ~ 50 Hz
Power 600 W
Head type 2 lines
Cutting length 32 cm
Weight 2,7 kg
CA
TAP & GO
RT
TELESCOPIC ADJUSTMENT
ER
ADJUSTABLE HANDLE
Garland • 51
INNOVATION
AT THE
SERVICE OF
NATURE
Garland • 58
Arm support
ARM SUPPORT
A great help
to lighten
the working task
COMFORT CARE TO DETAIL
Enjoy extra comfort in each work with the ARM 450 accessory, with its careful design,
it reduces up to 80 % the weight of the machines spreading it in the back and waist in
a healthy and balanced way .
Garland • 59
INNOVATION
AT THE
SERVICE OF
NATURE
SUPPORT PADDING
Support padding on the top and
bottom of the back for added
comfort.
Advantages
M
BACKPACK COMFORT
TD
Distributes the weight of
the tool, thanks to its triple
fastening on shoulders and
waist, achieving a unique
comfort.
RA
HEIGHT ADJUSTMENT
2 practical adjustment options
to achieve the most comfortable
working position.
Garland • 60
UNSCREWABLE
Easy system splits the tube,
for easy transport and better
storage in minimum space.
E
MAXIMUM EQUILIBRIUM
Magnificent suspension
system which can reduce the
weight of the machine in the
arms up to 80% . It allows you
to adjust the cable tension for
a custom fit .
ARM SUPPORT
INTENSIVE WORK
ARM 450 (PV-3266)
ARM 450 device is
ergonomically designed to
reduce stress on the arms
when working at raised
levels. Supports the weight
of telescopic tools up to 8 kg,
easily spreading the weight in
the back and waist.
TECHNICAL CHARACTERISTICS
Adjusting spring 3 to 5 kg
Height 2 positions
Using machines 4 to 8 kg
M
BACKPACK COMFORT
TD
RA
HEIGHT ADJUSTMENT
E
UNSCREWABLE
MAXIMUM EQUILIBRIUM
Garland • 61
INNOVATION
AT THE
SERVICE OF
NATURE
Garland • 62
Hedge trimmers (petrol and electric)
HEDGE TRIMMERS
Put imagination
to hedge design
CUT THEM NOW MORE EASILY
Elaborate hedges and colorful forms is not such a complicated task. With the precision,
power and ergonomics of all Garland hedge cutters it is easier. Blades of quality steel
and dual gears ensure a clean cut without effort. Its lighter and powerful engines make
for an effective work. Adjustable handles for easier reach.
Garland • 63
INNOVATION
AT THE
SERVICE OF
NATURE
ERGONOMIC STARTER
HANDLE
SEMI TRANSPARENT FUEL TANK
It allows the operator to easily check the fuel level
before starting work. Its vertical position makes it
easier to fill.
SAFETY TRIGGER
It prevents accidental
acceleration.
ANTI-VIBRATION SYSTEM
With its antivibration system you can
work more efficiently and for longer
periods of time.
Advantages
EN
2 STEP GEARS
90
Powerful 2 step gears, which
ensure efficient cutting of even
hard branches, by opening the
blades and an effective
continued hammering.
E
EXHAUST OUTLET
Studied front outlet,
preventing exhaust gases
from reaching the user.
Garland • 64
90º TURN HANDLE
Practical 90º turn handle,
offering maximum comfort
and efficiency in both vertical
and horizontal cuts .
CA
STEEL MACHINING BLADE
(DOUBLE EDGED CUTTING BLADES)
Top quality in double edged
cutting blades cut with laser
and sharpened by diamond to
guarantee the best cut and
prolongs the life of the machine.
ERGONOMIC EASY GRIP
HANDLE
For a safer, more comfortable
and ergonomic grip.
HEDGE TRIMMERS
FRONT PROTECTOR
For added security.
STEEL GEARS
Resistant steel gears ensure efficient
cutting even with hard branches.
CP
PRO BLADE
(TRIPLE FILO)
Laser-cut and diamond
honed precision for a flawless
performance and extended life
of the machine.
EM
MECHANICAL CLUTCH
Mechanical shut-off that
causes the synchronized stop
of the blades in less than 0.04
seconds.
Garland • 65
INTENSIVE WORK
INNOVATION
AT THE
SERVICE OF
NATURE
SET 802 G-V16 (42G-0013)
SET 752 G (42G-0011)
This model beats the record. There ais no machine in the
market with these features and small weight. The efficiency of
the 2-stroke engine and its maneuverability is unique to obtain
a comfortable and satisfactory work even during long working
periods.
This practical and lightweight hedge trimmer allows you to
perform your tasks breathing clean air, thanks to its gas outlet
strategically located in the front to prevent these from reaching
the user. In addition, an adjustable 90º handle to achieve all
necessary working positions.
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
Engine 2 stroke Garland
Engine 2 stroke Garland
Displacement 23 cc
Displacement 22,5 cc
Power 0,6 kW/0,8 CV
Power 0,65 kW/0,9 CV
Blade length 45 cm
Blade length 60 cm
Tooth spacing 25 mm
Tooth spacing 28 mm
Weight 4,2 kg
Weight 6,1 kg
CP
PRO BLADE
CP
E
Garland • 66
PRO BLADE
EXHAUST OUTLET
90
90º TURN HANDLE
No hedge trimmer can provide more power and quality with
so little weight. The prodigious SET 652 VE with just 4.5 Kg .
Combined with its 2 step metal gear and synchronized blades
which stop in 0.02 seconds. Professional steel triple edged
blades and a comfortable adjustable handle.
SET 452 VE (42EL-0018)
Thanks to efficient 2 step steel gears which ensure continued
hammering of its synchronized double-edge blades and a
comfortable twist handle, make this hedge trimmer a much
sought after model.
TECHNICAL CHARACTERISTICS
Electric motor 230 V ~ 50 Hz
Electric motor 230 V ~ 50 Hz
Power 750 W
Power 710 W
Blade length 69 cm
Blade length 61 cm
Tooth spacing 28 mm
Tooth spacing 24 mm
Weight 4,5 kg
Weight 4,3 kg
EN
2 STEP GEARS
90
CP
PRO BLADE
90º TURN HANDLE
EM MECHANICAL CLUTCH
HEDGE TRIMMERS
TECHNICAL CHARACTERISTICS
INTENSIVE WORK
INTENSIVE WORK
SET 652 VE-V1 (42EL-0019)
EN
2 STEP GEARS
90
90º TURN HANDLE
CP
PRO BLADE
CA
MECHANIZED STEEL BLADE
CA
MECHANICAL CLUTCH
SET 352 E (42EL-0017)
SET FIRST E (42EL-0016)
Not only does it stand out for its efficient technology but
also for its careful ergonomics. Its 90º handle, facilitates
vertical cuts and makes it particularly versatile and handy. Its
machined steel blade with double-edged cut that ensures a
thorough cut. Highly recommended for cutting and for tipping
privet .
This 550 W electric hedgtrimmer with stamped steel blade
ensures a perfect clean cut. An expert in cutting the privet
and the arborvitae ends, with many followers because of its
excellent price-quality ratio.
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
Electric motor 230 V ~ 50 Hz
Electric motor 230 V ~ 50 Hz
Power 600 W
Power 550 W
Blade length 61 cm
Blade length 51 cm
Tooth spacing 24 mm
Tooth spacing 20 mm
Weight 3,3 kg
Weight 3 kg
CA
MECHANIZED STEEL BLADE
90
90º TURN HANDLE
Garland • 67
INNOVATION
AT THE
SERVICE OF
NATURE
Garland • 68
Wood chipper (petrol and electric)
WOOD CHIPPERS
Clean and healthy
garden
IN A SINGLE MOVEMENT
If you like having a beautiful and well kept garden, you need a shredder. Avoid countless
trips to discard the trimmings, quickly compress and handle in the most convenient
way. Shredding makes dry leaves or branches into healthy natural compost for feeding
your garden. You just need to choose which of the wood chippers of our extensive and
renewed range is best suited to each garden..
Garland • 69
INNOVATION
AT THE
SERVICE OF
NATURE
HOPPER
Insert material for subsequent
grinding.
OUTLET
Crushed material regulator.
TRANSPORT HANDLE
Facilitates handling and
transportation with wheels.
EMERGENCY BUTTON
It has an emergency button for
added safety.
Advantages
C
CRUSHING BLADES
R
Efficient movement of blades
at high speed for a full shred in
seconds.
M
CRUSHING HAMMERS
High crushing capacity thanks
to its 16 floating hammers that
break the pruning of large volume
(up to 1 cm . in thickness)
reducing them to a minimum.
Garland • 70
ROLLER CRUSHING
Comfortable grinding system
based on a roller rotating
at high speed automatically
drawing the shredding
material.
E
GEAR SHREDDING
Gear with sharp teeth that
cuts by pressure on a flat
surface. Quiet and effective.
Recommended for branch
shredding.
MATERIAL PUSHER
PRO crushing roll
For added security, it helps the operator to push
the material to be shredded into the hopper.
(HIGH SPEED)
Amazing recycling system. The advanced roll
grinding mechanism is based on 2 roller blades,
operating at high speed grinding the material to
a minimum. Certainly the fastest way to repower
nature.
TRANSPORT HANDLE
WOOD CHIPPERS
Facilitates handling and
transportation with wheels.
MATERIAL OUTPUT
Output of crushed
material.
T
ROTARY NOZZLE
It directs the flow of crushed
material in the desired
direction.
CA
WASTE CONTAINER
It stores the crushed waste,
facilitating its recognition.
S
SC SYSTEM (SAFETY CUT-OFF
SYSTEM)
Automatic stop system. Emergency
stop in the event that the operator
involuntarily inserts a hand into the
hopper.
RE
TRAILER
Tow hook to pull the machine
with a tractor or car.
Garland • 71
CHIPPER 1080 QG-V17
Large capacity roller
shredder with rotating
nozzle, safety system, towing
hook (non homologated
trailer valid only for use in
private farms, maximum
speed 10 km / h) and
pneumatic wheels. It is the
ideal machine for pruning
in large areas by grinding
leaves, branches and even
small trunks.
TECHNICAL CHARACTERISTICS
INTENSIVE WORK
INTENSIVE WORK
CHIPPER 1480 TQG-V17 (60G-0014)
Roller Shredder with
rotating nozzle and safety
system. It has pneumatic
wheels and handle to
facilitate its transport.
Grinds leaves, branches and
even small trunks. Includes
tool box.
TECHNICAL CHARACTERISTICS
Engine 4 stroke Garland
Engine 4 stroke Garland
Displacement 420 cc OHV
Displacement 208 cc OHV
Power 11,2 kW/15,2 CV
Power 5,2 kW/7,1 CV
Grinding diameter up to 10 cm (3,9”)
Grinding diameter up to 7 cm (2,7”)
Revolutions per minute 3.600
Revolutions per minute 3.600
Weight 185 kg
Weight 75 kg
R
RE
ROLLER CRUSHING
TRAILER
T
ROTARY NOZZLE
S
SC SYSTEM
R
ROLLER CRUSHING
T
ROTARY NOZZLE
S
SC SYSTEM
CHIPPER 790 QG (60G-0008)
CHIPPER 780 QG-V17
Shreds large amounts of
leaves, branches and even
trunks. Nothing resists the
Garland 196 cc. OHV 4-stroke
engine with its 16 floating
hammers and blades moving
at high speed . This versatile
shredder includes a hopper
for introducing leaves, twigs
and debris up to 1 cm , and a
nozzle for branches and trunks
up to 7,6 cm.
Basic roller shredder ideal
for small domestic crushing
work. Its small size, with
wheels and handle for easy
transport. It has rotating
nozzle and an emergency
stop button.
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
Engine 4 stroke Garland
Engine 4 stroke Garland
Displacement 196 cc OHV
Displacement 196 cc OHV
Power 4,70 kW/6,4 CV
Power 4,9 kW/6,7 CV
Grinding diameter up to 7,6 cm (3”)
Grinding diameter up to 6 cm (2,3”)
Revolutions per minute 3.600
Revolutions per minute 3.600
Weight 70 kg
Weight 50 kg
C
CRUSHING BLADES
R
ROLLER CRUSHING
M
CRUSHING HAMMERS
T
ROTARY NOZZLE
Garland • 72
(60G-0011)
(60G-0010)
CHIPPER 100 E-V15 (60EL-0018)
Silent roller shredder with an
induction engine. Compact
and efficient, it includes waste
collection drawer with safety
system (the wood cutter does
not work without the drawer
being correctly installed) and
wheels for easy transport.
This discrete 2500 W
electric shredder carries out
all shredding work. Practical
collecting bag to ensure
cleanliness, with wheels
for easy transport.
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
Electric motor 230 V ~ 50 Hz
Electric motor 230 V ~ 50 Hz
Maximum power 2.800 W
Maximum power 2.500 W
Grinding diameter up to 4,5 cm
Grinding diameter up to 4,5 cm
Revolutions per minute 46
Revolutions per minute 4.500
Weight 27,6 kg
Weight 10 kg
E
GEAR SHREDDINGS
CA
WASTE CONTAINER
C
WOOD CHIPPERS
CHIPPER 355 LE-V16 (60EL-0019 )
CRUSHING BLADES
Garland • 73
INNOVATION
AT THE
SERVICE OF
NATURE
Garland • 74
Scarifiers (petrol and electric)
SCARIFIERS
Long live your
garden
EFFICIENT LAWN REGENERATOR
There are those who think that a healthy lawn is very demanding. But what it
really needs is simply good care. To have a good lawn there is nothing like counting on
Garland tools. Our scarifiers contribute to a complete lawn regeneration, carrying out
an efficient job. Moreover, some more advanced models can also work as aerators,
removing dead grass and moss or thatch from the soil.
Garland • 75
INNOVATION
AT THE
SERVICE OF
NATURE
FOLDABLE HANDLEBARS
Optimizes the room when
it is transported or stored.
COLLECTION BAG
Great collecting capacity.
POWERFUL ENGINES
For a more efficient and
productive job.
RESISTANT HOUSING
Advantages
ME
Different housing types: steel,
polypropylene.
ERGONOMIC HANDLEBAR
R
A design adaptable to the
comfort of every user or task.
The handlebar can be adjusted
up to three different positions.
CA
STEEL BLADE
High efficiency blades for a
satisfying job. The soil will be
cleaned up in less time and
with less effort.
Garland • 76
DEPTH REGULATOR
Comfortable depth setting
device, to select the necessary
depth for each area.
S
COLLECTION BAG
Practical system to collect the
dead grass, placing it in a bag.
SCARIFIERS
STEEL BLADES
Resistant steel blades that ensure
an efficient cutting and the
subsequent collecting.
2
2 FUNCTIONS IN 1
It incorporates 2 skillful rollers
to leave the lawn perfectly
cleaned up: one is a scarifier
and the other one is an aerator.
1
CC
CURVED SHAPED
STEEL
BLADE
Curved shaped steel blades to
offer a grater resistance and
efficiency.
2 FUNCTIONS IN 1
It incorporates a skillful roller
that works as scarifier and
aerator to leave the lawn
perfectly cleaned up.
Garland • 77
INNOVATION
AT THE
SERVICE OF
NATURE
Oxygenate
the earth
LAWN IN PERFECT
CONDITION
With the passage of time a surface layer is created in
the lawn formed by earth, remains of roots and leaves,
which makes it difficult for nutrients to pass, air and
water to the ground. The scarifier is the tool that allows
the grass to regain its vitality breaking this surface layer.
It is important to scarify at the beginning of spring and
we recommend to scarify again in autumn. Keep in mind
that the scarifier breaks the ground and leaves and initial
appearance might be ugly. Do not worry, in a couple of
weeks the lawn will have regained its appearance and
be more vigorous than before.
S 390 H (56ESG-0001)
Its 4 stroke Honda engine is
ready for the most intense
tasks. Equipped with steel
housing and curved shaped
blades to offer higher
resistance and efficiency.
And it is height adjustable to
select the working depth as
needed.
TECHNICAL CHARACTERISTICS
Engine 4 stroke Honda GP 160
Displacement 163 cc OHV
Power 3,6 kW/4,9 CV
Working width 38 cm
Working depth 0 to 10 mm
Bag capacity 40 liters
Type of housing steel
Weight 30 kg
CA
R
Garland • 78
STEEL BLADE
DEPTH REGULATOR
S
CC
COLLECTION BAG
CURVED SHAPED STEEL BLADE
SCAR 302 E (56ESE-0007)
SCAR 102 E-V16 (56ESE-0015)
1,300W electric scarifier,
robust polypropylene
housing, 5 different
operating heights, it
incorporates two skillful
rollers to leave the lawn
perfectly cleaned up, an
aerator roller and a scarifier
roller with curved shaped
steel blades for a better job.
1.400 W electric scarifier,
with a light polypropylene
housing, steel blades,
collection bag, working
depth adjustment in 4
positions and a versatile kit
with two rollers to carry out
the functions of scarifier
and aerator.
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
Electric motor 230 V ~ 50 Hz
Power 1.800 W
Power 1.400 W
Working width 36 cm
Working width 32 cm
Working depth escarificador 0 to 10 mm
Working depth escarificador 0 to 10 mm
Working depth aireador 0 to 5 mm
Working depth aireador 0 to 10 mm
Bag capacity 40 l
Bag capacity 35 l
Type of housing polypropylene
Type of housing polypropylene
Weight 18,3 kg
Weight 10 kg
ME ERGONOMIC HANDLEBAR
CA
STEEL BLADE
R
DEPTH REGULATOR
S
COLLECTION BAG
1
2 FUNCTIONS IN 1
CA
R
STEEL BLADE
S
COLLECTION BAG
DEPTH REGULATOR
2
2 FUNCTIONS IN 1
SCARIFIERS
Electric motor 230 V ~ 50 Hz
Garland • 79
INNOVATION
AT THE
SERVICE OF
NATURE
Garland • 84
Lawnmowers (petrol and electric)
LAWNMOWERS
The perfect lawn
with minimum
effort
LEAVE IT TO OUR MOWER
When a self-propelled mower system incorporates multi-speed, simultaneous height
adjustment and three cutting systems mowing becomes a rewarding experience. This is
the case of the new Garland range, the latest equipment and quality, designed to offer
unparalleled performance and high user comfort.
Garland • 85
SELF PROPELLED SYSTEM
INNOVATION
AT THE
SERVICE OF
NATURE
Comfortable self propulsion system,
replaces pushing the machine.
FOLDING HANDLE
For better storage and easier
transport.
COLLECTION BAG
Large collection capacity.
Advantages
T
TOUGH CHASSIS
Different types of housing:
Aluminum, steel, polypropylene.
SELF-PROPELLED
4
Dynamic and convenient
traction system saves the
user the effort of pushing
the machine.
T4
SELF-PROPELLED 4 SPEED
Revolutionary system with
4-speed adjustable traction.
The user chooses the most
suitable speed for each task
in hand.
Garland • 86
4 IN 1 CUTTING SYSTEM
Four cutting possibilities
• Rear exit cut to the
collecting bag.,
• Cut and collection
• Lateral exit for high cut
• Mulching cut
2
2 IN 1 CUTTING SYSTEM
System with two types of cut.
• Rear exit cut to the
collecting bag.
• Mulching cut.
POWERFUL ENGINES
For a more efficient and
productive work.
FRONT HANDLE
For easier transport
LAWNMOWERS
STEEL BLADE
Resistant steel blades ensure
efficient cutting and subsequent
collection.
RR
WHEELS WITH BALL
BEARINGS
AE
Start the mower by simply turning the
ignition key. The electric start system
works with a rechargeable lithium
battery capable of making 75 starts
with a single charge and rechargeable
100% in an hour.
Sophisticated wheels with
double ball bearings for greater
ease of movement and a more
comfortable workout.
RA
CUTTING HEIGHT
REGULATIONS
4 wheel drive adjusting to
the desired cutting height.
ELECTRIC START
C
HOSE PLUG
Standard hose connector for
cleaning the machine after use.
Insert the hose, open the water tap
and start the mower, your machine
will be clean in a few seconds
Garland • 87
INNOVATION
AT THE
SERVICE OF
NATURE
GRASS 755 SG-V15 (56G-0094)
GRASS FIRST SG-V15 (56G-0093)
Select the ideal cutting height and start its 4-stroke
139 cc OHV with its 50 l. catcher and enjoy the
ride. You can choose up to 7 heights cutting
positions. Cut all the grass quickly with a
cutting width of 46 cm, which will be
deposited neatly in your 50 l. catcher.
Moreover, thanks to its blade
brake and its tough steel
housing, your job will be
done quietly.
This mower does not need to be pushed. Thanks to
its innovative self propelled system simply
accompany the machine, and effectively do all
the work. But its self-propelled movement is
not all that its surprising. It also has a very
reasonable price for a machine with
many features: Garland 4-stroke
engine of 99 cc OHV, 7 cutting
height positions cutting, 40 cm
cutting width, blade brake,
steel case and 40 l. catcher.
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
Engine 4 stroke Garland
Engine 4 stroke Garland
Power 139 cc OHV/1,9 kW/2,5 CV
Power 99 cc OHV/1,3 kW/1,8 CV
Cutting width 46 cm
Cutting width 40 cm
Blade brake yes
Blade brake yes
Cutting height 7 (25-75 mm)
Cutting height 7 (25-65 mm)
Capacity of the bag 50 liters
Capacity of the bag 40 liters
Type of housing steel
Type of housing steel
Traction yes
Traction yes
Weight 30,5 kg
Weight 23 kg
T
RR
SELF-PROPELLED
WHEELS WITH BALL BEARINGS
Garland • 90
RA
CUTTING HEIGHT REGULATIONS
T
RR
SELF-PROPELLED
WHEELS WITH BALL BEARINGS
RA
CUTTING HEIGHT REGULATIONS
GRASS 500 E (56EL-0031)
GRASS 300 E (56EL-0030)
This electric 1.800 W lawnmower, exceeds all in
its category. More powerful engine for a more
professional work, 6 cutting height and an
extraordinary collection capacity 50 l. In
addition, of course, it includes blade
brake, lightweight polypropylene
housing, folding handlebars and
a handle for easy storage and
transport.
Its electric 1.500 W. engine acts swiftly, cutting
grass in medium sized spaces without tiring.
Ergonomic control system, several cutting
positions by pressing a single lever. Its
blade brake guarantees you a quiet
work and its polypropylene housing
reduces the weight of the machine
making it very comfortable
to use. You can store up to
35 l. in its collection bag
and handlebars are
collapsible to optimize
space.
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
Electric motor 230 V ~ 50 Hz
Power 1.800 W
Power 1.500 W
Cutting width 43 cm
Cutting width 37 cm
Blade brake yes
Blade brake yes
Cutting height 6 (25-75 mm)
Cutting height 4 (25-75 mm)
Capacity of the bag 50 liters
Capacity of the bag 35 liters
Type of housing polypropylene
Type of housing polypropylene
Weight 16 kg
Weight 11,5 kg
RA
CUTTING HEIGHT REGULATIONS
RA
LAWNMOWERS
Electric motor 230 V ~ 50 Hz
CUTTING HEIGHT REGULATIONS
GRASS 100 E-V15 (56EL-0029)
This lightweight and efficient mower is one of
the most demanded by our customers
due to its excellent value for money.
In addition, it is ideal for work in
reduced spaces, with a cutting
width of 32 cm, 30 liter capacity
catcher, 3 position cutting heights,
blade brake, only 9.2 Kg. and with
its handle it can be easily transported.
TECHNICAL CHARACTERISTICS
Electric motor 230 V ~ 50 Hz
Power 1.000 W
Cutting width 32 cm
Blade brake yes
Cutting height 3 (25-62 mm)
Capacity of the bag 30 liters
Type of housing polypropylene
Weight 7,3 kg
Garland • 91
INNOVATION
AT THE
SERVICE OF
NATURE
Garland • 96
Tillers (petrol and electric)
TILLERS
A more productive
workrate
MINIMUM EFFORT, MAXIMUM RESULT
Preparing the orchard properly involves a strict work in methodology and in timing. The
soil is more productive when it is worked in the right way and at the right time. For this
reason, our tillers guarantee more productivity. Apart from making tasks easier and
more pleasant, they know how to care sown fields so that they grow strong. And, they
naturally save time, allowing us to sow, with no delays, at the most suitable time to
ensure a good harvest.
Garland • 97
INNOVATION
AT THE
SERVICE OF
NATURE
EASY GRIP ERGONOMIC
HANDLEBARS
For a safer, more comfortable
and ergonomic grip.
PLANT GUARDS
Limit the working area to
protect plants.
Advantages
ML
ADJUSTABLE LATERAL
HANDLEBAR
MA
Handlebar with lateral
regulation system, specially
thought to avoid stepping the
working area
CA
STEEL BLADES
A dynamic rotavator with
4, 6 or 8 sets of blades,
depending on the required
working width.
Garland • 98
HEIGHT ADJUSTABLE
HANDLEBAR
Handlebar height adjustment
to the user’s, requirement, for
a more comfortable workout.
CC
GEARBOX
A comfortable gear box to select
from 2 different forward speeds
and one reverse. Ideal for works
which require different speeds
of blade rotation.
POWERFUL ENGINES
For a more efficient and
productive work.
TRANSPORT HANDLE
Comfortable handle to
facilitate its transport.
TILLERS
STEEL BLADES
Strong steel blades which
guarantee an efficient job.
T
DEPTH CONTROL
Ingenious depth control system
to adjust working depth.
R
TRANSPORT WHEEL
Practical wheel to facilitate the
transport of the cultivator.
Garland • 99
MULE 761 QG-V16 (63G-0051)
MULE 741 QG (63G-0038)
With a working width of 80 cm,
this tiller can cover large areas
in a short time. It is powered
by a 4 stroke Garland engine
of 196 cc. OHV, it non-stop
beats the soil, leaving
it ready for sowing. Its
rotavator of 6 sets
with steel blades, its
height adjustable
handlebar, its depth
control system and its
transport wheel, add
comfort of use and
efficiency.
A light and compact cultivator with a 4
stroke engine, very easy to transport due
to its wheel and its nimble form. It can
perform jobs rapidly and easily. It
has a rotavator with 4 sets of
strong steel blades and
guards to protect plants,
a depth control system
fixing working depth
and a height adjustable
handlebar for better
comfort
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
Engine 4 stroke Garland
Engine 4 stroke Garland
Displacement 196 cc OHV/3,8 kW/5,2 CV
Displacement 98 cc OHV/1,6 kW/2,2 CV
Rotavator 6 sets
Rotavator 4 sets
Working width 80 cm
Working width 45 cm
Blade diameter 32 cm
Blade diameter 25 cm
Speeds one speed
Speeds one speed
Weight 58 kg
Weight 30 kg
CA
STEEL BLADES
MA
HEIGHT ADJUSTABLE HANDLEBAR
Garland • 102
STEEL BLADES
T
DEPTH CONTROL
CA
R
TRANSPORT WHEEL
MA HEIGHT ADJUSTABLE HANDLEBAR
T
DEPTH CONTROL
R
TRANSPORT WHEEL
MULE 561 QG-V16 (63G-0053)
MULE 541 QG-V15 (63G-0049)
4-stroke lightweight tiller with 139cc vertical
motor and 6 rotavator sets. it allows working
with 6 or 4 rotavator sets adjusting the
working width. includes retractable
transport wheel and adjustable height
spur.
Its light weight and reduced dimensions, make
this tiller a good tool for smaller areas. With a
4 stroke Garland engine and a displacement
of 139 cc. OHV, it easily carries out tasks,
working in areas up to 36 cm width at
each stage. It includes a depth control
system, to set a working depth and a
comfortable transport wheel.
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
Engine 4 stroke Garland
Engine 4 stroke Garland
Displacement 139 cc OHV/2,2 kW/3,0 CV
Displacement 139 cc OHV/2,2 kW/3,0 CV
Rotavator 6 sets
Rotavator 4 sets
Working width 60 cm
Working width 36 cm
Blade diameter 27 cm
Blade diameter 27 cm
Speeds one speed
Speeds one speed
Weight 41 kg
Weight 36 kg
CA
T
STEEL BLADES
R
TRANSPORT WHEEL
DEPTH CONTROL
CA
T
STEEL BLADES
R
TRANSPORT WHEEL
DEPTH CONTROL
TILLERS
MULE 341 G-V15 (63G-0046)
A light tiller with a 2 stroke engine, very easy to transport
due to its handle and the machine being light
weight. It allows the user to cary out works
rapidly and easily, being specially suitable
to weed and beat soil efficiently. It has
strong steel blades and a depth control
system to set working depth.
TECHNICAL CHARACTERISTICS
Engine 2 stroke Garland
Displacement 49 cc/1,9 kW/2,6 CV
Rotavator 4 groups
Working width 24 cm
Blade diameter 21 cm
Speeds one speed
Weight 16,5 kg
CA
T
STEEL BLADES
DEPTH CONTROL
Garland • 103
INNOVATION
AT THE
SERVICE OF
NATURE
Garland • 106
High pressure washers (petrol and electric)
HIGH PRESSURE WASHERS
It removes dirt
rapidly
HIGH DESCALING FORCE
Our high pressure washers are specialists in any kind of dirt, even the most difficult. In
our desire to get the best cleaning tools, we keep on innovating. A petrol model is now
incorporated to our maneuverable and practical designs so that you can take it with you
without any limitations. And if you are looking for descaling force and a greater reach,
you can now have our model equipped with professional gun handle and 8 meters of
hose. And for a greater adaptability, all our electric models are equipped with a wide
range of optional accessories designed for each assignment: cleaning floors, gutters,
pipes, large surfaces, pressure hose extension, etc. For a rigorous cleaning, commit
yourself to Garland’s innovation and high quality.
Garland • 107
INNOVATION
AT THE
SERVICE OF
NATURE
Advantages
AD
BUILT-IN DETERGENT
TSS
Light detergent suction system of the
tank, with a simple positioning of the
gun handle at low pressure.
D
PRESSURE HOSE WINDER
Practical winder designed to
roll the pressure hose up
easily and keep everything
tidy.
Garland • 108
TSS SYSTEM
Efficient mechanism of
automatic engine stop
when the water outlet
trigger is not released.
KIT
ACCESSORIES KIT
Efficient accessories for an
even more precise cleaning:
fixed washing brush and
rotating nozzle.
POWERFUL ENGINES
Petrol and electric engines to
offer a more productive and
efficient work.
TRANSPORT WHEEL
HIGH PRESSURE WASHERS
They facilitate machine
movement and transport.
BL
BRASS PUMP
Pump casing made of resistant
brass providing a greater
durability.
PP
BL
SELF-PRIMING
You can draw water from tanks
that are at the same height as
the pump
PROFESSIONAL GUN
HANDLE
High efficiency and durability
of a gun handle made of more
resistant materials. Accurate and
ergonomic, for a very gratifying
work.
Garland • 109
ULTIMATE 820 QG (45-0037)
You are not restricted by the
wire length to perform your
cleaning tasks. With this
independent petrol pressure
washer you will have all the
cleaning force of water where
you need it. In addition to
its great power, Ultimate
820 QG is equipped with a
strong brass casing pump,
professional screw gun, 5
different nozzles of water
outlets and a professional 22
mm. screw hose.
TECHNICAL CHARACTERISTICS
INTENSIVE WORK
INTENSIVE WORK
INNOVATION
AT THE
SERVICE OF
NATURE
ULTIMATE 818 LE (45-0036)
Its powerful induction engine,
its exclusive brass casing
pump provides this pressure
washer with a long service life.
Its higher flow, its professional
8 meter long hose with a 22
mm screw, TSS system and
its professional screw gun
with metallic parts make
it appropriate for the most
intensive work. It includes a
rotating nozzle.
TECHNICAL CHARACTERISTICS
Engine 4 stroke Garland
Electric motor 230 V ~50 Hz
Displacement 208 cc OHV
Power 3.000 W
Power 4,1 kW/5,6 CV
Maximum pressure 180 bar
Maximum pressure 207 bar
Maximum rate flow 522 l/h
Maximum rate flow 523 l/h
Pressure hose 8 m
Pressure hose 7 m
Maximum temperature (aspiration water) 40ºC
Maximum temperature (aspiration water) 40ºC
Brass pump with 3 pistons
Brass pump with 3 pistons
Weight 21,5 kg
Weight 27 kg
AD
BUILT-IN DETERGENT
PP
PROFFESSIONAL GUN HANDLE
AD
D
Garland • 110
BUILT-IN DETERGENT
TSS TSS SYSTEM
PRESSURE HOSE WINDER
BL
BRASS PUMP
PP
PROFFESSIONAL GUN HANDLE
INTENSIVE WORK
ULTIMATE 617 LE (45-0039)
ULTIMATE 517 LE (45-0035)
Powerful electric induction
2,500 W engine for a more
careful cleaning. With TSS
system, its professional 8 m
hose with a 22 mm screw,
professional screw gun and
automatic detergent aspiration
system. It includes a rotating
nozzle.
Powerful electric induction
2,500 W engine for a more
careful cleaning. With TSS
system, winder with pvc
hose with 14 mm screw, and
automatic detergent aspiration
system, bayonet accessories
(fixed washing brush and
rotating nozzle).
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
Electric motor 230 V ~50 Hz
Electric motor 230 V ~50 Hz
Power 2.500 W
Power 2.500 W
Maximum pressure 170 bar
Maximum pressure 170 bar
Maximum rate flow 440 l/h
Maximum rate flow 440 l/h
Pressure hose 8 m
Pressure hose 8 m
Maximum temperature (aspiration water) 40ºC
Maximum temperature (aspiration water) 40ºC
Weight 22,4 kg
Weight 21,1 kg
AD
BUILT-IN DETERGENT
PP
PROFFESSIONAL GUN HANDLE
TSS TSS SYSTEM
AD
D
BUILT-IN DETERGENT
TSS TSS SYSTEM
PRESSURE HOSE WINDER
KIT ACCESSORIES KIT
ULTIMATE 114 E (45-0033)
Apart from having a winder
to roll and clear up the pvc
hose with 14 mm screw,
automatic stop TSS system
and automatic detergent
aspiration, 3 piston pump,
2,000 W power and bayonet
accessories (fixed washing
brush and rotating nozzle).
Perfect for an efficient
cleaning in a particular area.
Equipped with a 3 piston
pump and a TSS system, it
outperforms due to its value
for money. It has a pvc hose
with 14 mm screw and a gun
handle bayonet.
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
Electric motor 230 V ~50 Hz
Electric motor 230 V ~50 Hz
Power 2.000 W
Power 1.800 W
Maximum pressure 150 bar
Maximum pressure 140 bar
Maximum rate flow 400 l/h
Maximum rate flow 400 l/h
Pressure hose 8 m
Pressure hose 5 m
Maximum temperature (aspiration water) 40ºC
Maximum temperature (aspiration water) 40ºC
Weight 9,8 kg
Weight 7,9 kg
AD
D
BUILT-IN DETERGENT
TSS TSS SYSTEM
PRESSURE HOSE WINDER
KIT ACCESSORIES KIT
HIGH PRESSURE WASHERS
ULTIMATE 315 E-V15 (45-0041)
TSS TSS SYSTEM
Garland • 111
INNOVATION
AT THE
SERVICE OF
NATURE
Garland • 124
Blowers/vacuums (Petrol electric and battery)
BLOWERS
A garden free
of dry leaves
EFFICIENT BLOWING, VACUUMING AND MULCHING
Clearing the garden of dry leaves and other debris is almost as simple as if they were
blown off. Garland leaf blowers are thought to carry out tasks really fast. With their
blowing force they sweep the leaves in no time at all. In those areas where we do not
want to raise dust, some models offer vacuuming function, and they also incorporate
an efficient mulching function to get rid of the debris easily.
Garland • 125
INNOVATION
AT THE
SERVICE OF
NATURE
ENGINE STOP SWITCH
ON THE HANDLE
ERGONOMIC HANDLE
Engine stop switch placed
on the handle.
Ergonomically designed handle,
soft and easy to hold for a fast
and safe handling.
UPRIGHT POSITIONED
TRANSLUCENT FUEL TANK
It allows the operator to easily
check the fuel level before starting
work. The upright position makes it
easier to refill.
Advantages
S
COLLECTION BAG
RE
Included in the models with
vacuuming function.
M
BACKPACK
Leaf blower, comfortable to
carry, ideal for long workouts
and large areas.
Garland • 126
ELECTRONIC REGULATOR
It allows to select the
air flow work outs.
SP
LEAF BLOWER
It saves long hours of
tedious collecting.
POWERFUL ENGINES
For a more efficient and
productive work.
COLLECTION BAG
Great collecting capacity.
BLOWERS
AS
VACUUM
L
High efficiency, even
reaching previously
inaccessible corners
TR
MULCHING FUNCTION
While vacuuming the leaves,
these pass through a fan where
they are mulched and the
original size is reduced several
times.
LIGHTWEIGHT
Light machine for long
blowing works.
ION
LITHIUM ION BATTERY
Prodigious rechargeable
battery. Lightweight, high
energy capacity, highly
resistant to discharges and
minimum memory effect.
Garland • 127
INTENSIVE WORK
INTENSIVE WORK
GAS 700 MG (44G-0008)
GAS 500 MG (44G-0010)
Thought for the most
demanding blowing tasks.
The power of its engine
allows a high air velocity,
sweeping the leaves and
debris in less time and
with less effort. Backpack
design for a higher
comfort.
Easy-to-use backpack leaf
blower with a 2 stroke
engine of 30.8 cc. able
to boost air at 275 km/h.
It has 1 kW power and
reaches an air flow rate of
12 m³/min. Its small weight
and its backpack shaped
design make it really
comfortable
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
Engine 2 stroke Garland
Engine 2 stroke Garland
Displacement 65,5 cc
Displacement 30,8 cc
Power 2,8 kW/3,8 CV
Power 1 kW/1,4 CV
Air velocity with nozzle 380 km/h
Air velocity with nozzle 275 km/h
Air flow rate 19,2 m3/min
Air flow rate 12 m3/min
Weight 12 kg
Weight 6,34 kg
M
BACKPACK
M
BACKPACK
SP
LEAF BLOWER
SP
LEAF BLOWER
LIGHTWEIGHT
L
GAS 650 QG (44G-0012)
GAS 550 G-V1 (44G-0009)
Three functions in just one machine to optimize the garden
cleaning work: blowing, vacuuming and mulching. Equipped
with a powerful 4 stroke engine, it is less noisy and with
lower emissions. It has a 40 litre bag. The
mulching process reduces up to 16 times
the original size of the debris.
Lightweight and maneuverable model
with a 2 stroke engine able to carry
out not only blowing and vacuuming
tasks but also mulching tasks. It can
collect up to 45 l. of debris in its bag.
It allows long blowing work outs, it
can even vacuum the least accessible
corners and mulching can be reduced
up to 16 times
the original
size.
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
Engine 4 stroke Garland
Engine 2 stroke Garland
Displacement 24,5 cc
Displacement 26 cc
Power 0,5 kW/0,7 CV
Power 0,7 kW/1,0 CV
Air velocity with nozzle ~225 km/h
Air velocity with nozzle ~225 km/h
Air flow rate 10,2 m3/min
Air flow rate 10,2 m3/min
Bag capacity 40 litres
Bag capacity 45 litres
Leaf blower/vacuum weight 5,5/6,3 kg
Leaf blower/vacuum weight 4,39/5,39 kg
S
SP
COLLECTION BAG
AS
VACUUM
LEAF BLOWER
TR
MULCHING FUNCTION
Garland • 128
L
LIGHTWEIGHT
S
SP
COLLECTION BAG
AS
VACUUM
LEAF BLOWER
TR
MULCHING FUNCTION
L
LIGHTWEIGHT
GAS 139 E-V16 (44EL-0016)
A good choice for those who are
looking for a good vacuuming and
blowing efficiency, lightweight for a
long work with less fatigue, and a
practical tool that can be stored in
the minimal space or transported
anywhere with ease. It
incorporates electronic air
velocity regulation.
This triple function model,
vacuum/blower/mulching,
makes tasks much lighter
thanks to its low weight.
Its electric engine counts
on 2,800 W of power. It
incorporates a 35 litre bag
for a higher debris capacity.
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
Electric motor 230 V ~ 50 Hz
Electric motor 230 V ~ 50 Hz
Power 2.800 W
Power 2.800 W
Air velocity with nozzle 275 km/h
Air velocity with nozzle 275 km/h
Bag capacity 35 litres
Bag capacity 35 litres
Weight 3,8 kg
Weight 3,3 kg
S
RE
COLLECTION BAG
ELECTRONIC REGULATOR
SP
LEAF BLOWER
AS
VACUUM
TR
L
MULCHING FUNCTION
S
LIGHTWEIGHT
RE
GAS 159 E-V15 (44EL-0015)
COLLECTION BAG
SP
LEAF BLOWER
ELECTRONIC REGULATOR
AS
VACUUM
TR
L
MULCHING FUNCTION
LIGHTWEIGHT
GAS 201 W (44EL-0008)
Blower, vacuuming and mulching in just one machine. Very
lightweight for more comfort, even during long leaf blowing
workloads. With collection bag and electronic air flow
regulation.
INTENSIVE WORK
INTENSIVE WORK
GAS 259 E-V15 (44EL-0017)
This leaf blower only needs to be plugged to the electric
network for one hour to offer a uninterrupted operation of
about 10 minutes. It can blow air out up to 220 km/h and it
can be easily controlled thanks to its very low weight.
BLOWERS
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
Electric motor 230 V ~ 50 Hz
Motor Lithium Ion battery
Power 2.600 W
Battery 18 V/1,4 Ah.
Air velocity with nozzle 270 km/h
Air velocity with nozzle 120-220 km/h
Air flow rate 7,5 m3/min
Air flow rate 5 m3/min
Bag capacity 45 litres
Weight 1,2 kg
Weight 4,7 kg
S
RE
COLLECTION BAG
SP
LEAF BLOWER
ELECTRONIC REGULATOR
AS
VACUUM
TR
L
MULCHING FUNCTION
LIGHTWEIGHT
SP
LEAF BLOWER
L
LIGHTWEIGHT
ION LITHIUM ION BATTERY
Garland • 129
INNOVATION
AT THE
SERVICE OF
NATURE
Garland • 130
Sprayers (petrol and electric)
SPRAYERS
Anti-pest efficiency
DISINFECTED PLANTS WITH LESS EFFORT
The pests, sometimes, seem a nightmare thats difficult to fight, but nothing could be
further from reality. Garland mistblowers guarantee you the victory. Our battery or petrol
sprayers reach without difficulty any corners to disinfect. Its success is based on its
efficient design and technology. They count on specialized nozzles for every area (flat
fan spray, conical, double adjustable sprayer) to cover larger areas easily. And now, for
the first time, we are incorporating wheeled and shoulder strapped portable models
which make transport and other tasks easier.
Garland • 131
INNOVATION
AT THE
SERVICE OF
NATURE
ERGONOMIC BACKPACK
Ergonomically designed,
comfortable, easy to grip
backpack.
TRANSPORT HANDLE
It makes the transport and
storage of the machine
easier.
TRANSLUCENT SPRAYING TANKS
It lets the operator check easily the liquid level of spray,
before and during the work.
Advantages
L
ATTACHABLE WAND
D1
Attachable or telescopic wand.
Ingenious device (depending on
the model) that allows to elongate
the sprayer action from 60 to
120 cm. reaching where pests
hide.
B
PUMP
Upside spraying guaranteed
thanks to the pump it
incorporates.
Garland • 132
D2
SPRAYING TANK
Versatile membrane pump that
admits both liquid and soluble
products.
SPRAYING TANK
Specially designed tank
to contain liquid and dust
products.
POWERFUL ENGINES
For a more efficient and productive
job.
SPRAYERS
M
ERGONOMIC BACKPACK
Ergonomically designed,
comfortable and easy to
handle backpack.
Garland • 133
INNOVATION
AT THE
SERVICE OF
NATURE
This tool is perfect for demanding spraying jobs,
thanks to its 41,5 cc 2 stroke engine. Its 14 l.
versatile tank admits both liquid and dust products.
Its pump allows to reach further, enabling upright
spraying. And its large diameter nozzle guarantees
wider spraying work, simplifying the work.
TECHNICAL CHARACTERISTICS
ATOM 250 G-V15 (50A-0011)
INTENSIVE WORK
INTENSIVE WORK
ATOM 550 MG (50A-0006)
Perfect for demanding tasks. Its 26 cc 2 stroke
engine is light and efficient. Any deposit can be
attached for a more comfortable fumigation and
can be transported in a wheel barrow. Its 15 m.
hose makes you reach further as well as fumigating
vertically.
TECHNICAL CHARACTERISTICS
Engine 2 stroke Garland
Motor 2 stroke Garland
Displacement 41,5 cc
Displacement 26 cc
Power 2,1 kW/2,9 CV
Power 0,75 kW/1 CV
Tank capacity 14 litres
Tank capacity optional (not included)
Maximum rate flow liquid 4 l/min
Maximum rate flow liquid 5,10 l/min
Maximum rate flow dust 6 l/min
Working pressure 15-25 bar
Weight 11 kg
Weight 7,8 kg
B
D2
PUMP
SPRAYING TANK
Garland • 134
B
D1
PUMP
SPRAYING TANK
FUM 550 MW (50A-0010)
FUM 350 MW (50A-0008)
High capacity tank, which admits up to 25
litres. Extra long hose, to reach longer
distances without moving. Spray gun
with the highest spraying height
among the battery models
in the range. And wheels to
make its transport easier.
An outstanding sprayer.
FUM 350 MW sprayer offers higher
capacity and autonomy, thanks to its 16
litre tank. Moreover, it is suitable for use
with liquid and soluble products. And
it includes 3 nozzles and 2 attachable
wands to extend the reach from 60 to
120 cm
4.5 METERS
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
Motor 12 V battery
Motor 12 V battery
Pressure 1,5- 5 bar
Pressure 1,5- 4 bar
Flow 1,6 l/min
Flow 0,48 - 1,2 l/min
Tank capacity 25 litres
Tank capacity 16 litres
Maximum battery operating time 5 hours
Maximum battery operating time 5 hours
Weight including the battery 11,4 kg
Weight including the battery 6 kg
L
D1
ATTACHABLE WAND
M
BACKPACK
SPRAYING TANK
L
D1
ATTACHABLE WAND
M
BACKPACK
SPRAYING TANK
FUM 150 MW (50A-0007)
All this light sprayer is a tank in itself: 12l.
capacity for liquid or soluble products. It
works with a 12V battery allowing up to 5
hours of non-stop work. And it includes
3 nozzles and 2 attachable wands to
extend the reach from 60 to 120 cm.
SPRAYERS
TECHNICAL CHARACTERISTICS
Motor 12 V battery
Pressure 1,5- 4 bar
Flow 0,48 - 1,2 l/min
Tank capacity 12 litres
Maximum battery operating time 5 hours
Weight including the battery 5,6 kg
L
D1
ATTACHABLE WAND
M
BACKPACK
SPRAYING TANK
Garland • 135
INNOVATION
AT THE
SERVICE OF
NATURE
Garland • 136
Generators
Power
everywhere
GENERATORS
MORE ENERGY, LESS EMISSIONS
In the countryside and in certain locations we may need a portable power source to
carry out our work. Garland generators are the solution. With a compact size they
provide a power supply able to feed high power electric machines for long hours and
without interruptions. Learn more about our new inverter technology generators, which
respect the environment, reducing the noise, the emissions and the fuel consumption
to a minimum. Our brand is now offering two new 100% practical models, one equipped
with wheels and electric starter and the other a hand portable.
Garland • 137
Inverter technology
and electric starter. Its
evolved inverter system
generates, with a reduced
fuel consumption, a
constant electric current.
Moreover, this innovation
makes it more silent and
ecological. Its electric
starter device makes start
up easier and faster. It is
also equipped with wheels to
transport it effortlessly wherever it is
needed.
INTENSIVE WORK
INTENSIVE WORK
BOLT 1025 IQ (53-0016)
TECHNICAL CHARACTERISTICS
Advanced and practical.
Its innovative technology
equips it with a more uniform
work. With minimal fuel
consumption, it provides
direct current producing less
noise and emissions. Its light
design allows it to be used
wherever it is needed. It
incorporates three outputs
(2 AC and 1 DC).
TECHNICAL CHARACTERISTICS
Engine 4 stroke Garland
Engine 4 stroke Garland
Displacement 208 cc OHV
Displacement 113 cc
Voltage/Frequency 230 V ~ 50 Hz
Voltage/Frequency 230 V ~ 50 Hz
Power 3 kVA maximum / 2,8 kVA rated
Power 2 kVA maximum / 1,8 kVA rated
Fuel tanks 10 liters
Fuel tanks 4,5 liters
Maximum autonomy 5 hours
Maximum autonomy 4 hours
Weight 49 kg
Weight 22 kg
I
INVERTER
R
TRANSPORT WHEELS
A
ELECTRIC STARTER
BOLT 925 QG (53-0011)
This powerful
generator is able to
provide powerful
machines with nonstop electricity. Its
engine, specially
efficient, is designed
to work long hours.
It incorporates 3
outputs (12V DC and
two AC). Supplied with a
wheel stand to transport it
easily.
TECHNICAL CHARACTERISTICS
I
INVERTER
L
LIGHTWEIGHT
BOLT 725 Q (53-0010)
INTENSIVE WORK
INTENSIVE WORK
BOLT 825 IQ (53-0015)
With a power of 3.8 kVA
this generator can provide
powerful machines with
non-stop electricity. Its
engine, specially efficient,
is designed to work long
hours. It incorporates
3 outputs (12V DC and
two AC). Supplied with a
wheeled stand to transport
it easily.
TECHNICAL CHARACTERISTICS
Engine 4 stroke Garland
Engine 4 stroke Garland
Displacement 389 cc
Displacement 270 cc
Voltage/Frequency 230 V ~50 Hz
Voltage/Frequency 230 V ~50 Hz
Power 5,5 kVA maximum/ 5 kVA rated
Power 3,8 kVA maximum/ 3,2 kVA rated
Fuel tank 25 liters
Fuel tank 25 liters
Maximum autonomy 9 hours
Maximum autonomy 10 hours
Weight 77 kg
Weight 69 kg
R
AV
TRANSPORT WHEELS
AUTOMATIC VOLTAGE REGULATOR (AVR)
Garland • 140
R
AV
TRANSPORT WHEELS
AUTOMATIC VOLTAGE REGULATOR (AVR)
BOLT 525 QG (53-0009)
BOLT 325 Q (53-0008)
The 3 KVA maximum
output power that this
machine reaches turns
it into the leader of
the range. It also has
3 outputs (two AC and
one DC) and a 4 stroke
Garland engine of 208
cc. that enables it to last
up to 12 hours.
Its active 4 stroke 163
cc. Garland engine
provides you with nonstop energy for 11
hours. This 3 output
(two AC and one DC)
generator also offers
information in its panel.
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
Engine 4 stroke Garland
Engine 4 stroke Garland
Displacement 208 cc
Displacement 163 cc
Voltage/Frequency 230 V ~ 50 Hz
Voltage/Frequency 230 V ~ 50 Hz
Power 3 kVA maximum/ 2,6 kVA rated
Power 2,2 kVA maximum/2 kVA rated
Fuel tank 15 liters
Fuel tank 15 liters
Maximum autonomy 12 hours
Maximum autonomy 11 hours
Weight 42 kg
Weight 40,5 kg
AV
AUTOMATIC VOLTAGE REGULATOR (AVR)
AV
AUTOMATIC VOLTAGE REGULATOR (AVR)
BOLT 110 I (53-0013)
Lightweight generator,
case-type, offers up to 5.8
hours of autonomy. It offers
an AC output.
For its lightness, its comfortable handle
and its ecological inverter system
this generator is perfect to provide
electric power anywhere. Its fuel
consumption is very reduced,
as well as the sound it produces.
It creates a constant current,
without ups and downs, and
offers an autonomy of up to
6 and a half hours. It counts
on 1 AC output.
TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
Engine 2 stroke Garland
Engine 2 stroke Garland
Displacement 63 cc
Displacement 42,7 cc
Voltage/Frequency 230 V ~ 50 Hz
Voltage/Frequency 230 V ~ 50 Hz
Power 0,72 kVA maximum/0,65 kVA rated
Power 1 kVA maximum/0,8 kVA rated
Fuel tank 4,2 liters
Fuel tank 3 liters
Maximum autonomy 5,8 hours
Maximum autonomy 6,5 hours
Weight 16 kg
Weight 8,5 kg
L
AV
LIGHTWEIGHT
I
INVERTER
AUTOMATIC VOLTAGE REGULATOR (AVR)
L
LIGHTWEIGHT
GENERATORS
BOLT 115-V1 (53-0012)
Garland • 141
INNOVATION
AT THE
SERVICE OF
NATURE
ELECTRONIC IGNITION
Better quality of engine ignition,
less emissions and more power.
Powerful
and versatile
driller
MULTIPLE USES WITH THE
LEAST EFFORT
The realization of holes for fence poles, planting trees,
etc. is an easy task if it is done with a driller. This machine
is a large drill driven by a 2 stroke engine that performs
drills in the ground with ease, generating almost perfect
holes that will allow you to ensure the good result of your
work.
Garland • 146
Drill (petrol)
ANTI-VIBRATION PROTECTOR
Handlebar protection cover that
eliminates vibrations to the user.
DOUBLE HANDLEBAR
It allows to use the machine
with one or two operators.
IGNITION SWITCH
Allows the machine to be easily
stopped in case of an emergency
Driller with 2-stroke engine. Its double helicoidal drills make
the hole twice as fast as the single ones and keep the torque
in the center of the drill that prevents the center of the hole
from moving. It includes 3 drills to make holes of the diameters
of 10cm, 15cm and 20cm and a handlebar for the use of the
machine by one or 2 operators.
Double perforation efficiency (faster and
simpler) and more stable by having the
center of the torque centered with the
axis of the drill.
DRILL
DRILL 932 G-V16 (49-0001)
DOUBLE HELICAL DRILLS
TECHNICAL CHARACTERISTICS
Engine 2 stroke
Displacement 52 cc
Power 1,9 kW/2,6 CV
Drill diameter 10/15/20 cm
Drill length 56/54/58 cm
Weights 12/13/14 kg
Garland • 147
INNOVATION
AT THE
SERVICE OF
NATURE
Garland • 148
Water/dust vacuum cleaners electric
Impeccable
cleanliness
MAXIMUM EFFICIENCY WITH ALL KINDS OF WASTE
VACUUM CLEANER
Our vacuum cleaner is reinvented to provide even more demanding cleaning on any
surface with minimal effort. Cleaning is a task that can be solved in a few minutes
thanks to our advanced vacuum water / dust cleaner. Garland offers an innovative tool
to absorb in one go, almost all types of waste: garbage and house dust, larger items
and DIY waste. And even liquids and spills.
Garland • 149
TRANSPORT HANDLE
INNOVATION
AT THE
SERVICE OF
NATURE
Handle to raise the engine when it
separates from the deposit and for
transporting the machine. it helps in
the transportation and allows to save
for easy carying slopes.
FLEXIBLE TUBE
It allows greater reach and a
more comfortable job.
TURNING WHEELS
Strong steering wheels for
greater mobility. It facilitates the
movement of the vacuum cleaner.
Advantages
AP
WATER/DUST VACUUM
CLEANER
GREAT CAPACITY DEPOSIT
Great recollection capacity.
B
Disposable bag for suctioning dry
materials.
Allows suction of solid or
liquid elements.
S
SYNCHRO
Synchronization system that
allows the vacuum cleaner to start
automatically when consumption
is detected at the socket of
the vacuum cleaner (Note: The
consumption of the connected
machine must exceed 60w).
Garland • 150
FILTER BAG
F
AIR/WATER FILTER
Washable filter suitable for
suctioning water or dust. It is
recommended that the filter is
completely dry and a vacuum
is drawn to improve the suction
capacity of the vacuum cleaner
and the duration of the vacuum.
POWERFUL ENGINES
For a more efficient and
productive work.
ACCESSORIES
Includes a variety of accessories to suit
different tasks.
A
ASPIRATION OF ASHES
T
VACUUM CLEANER
Its internal structure is
designed to be able to
vacuum ashes that are at
a temperature of less than
40ºc
TUBE AND METAL
ACCESSORIES
Increased resistance to
temperature and duration.
Garland • 151
INTENSIVE WORK
INNOVATION
AT THE
SERVICE OF
NATURE
CLEAN 640 EX-V16
(48-0018)
Water / dust vacuum cleaner ideal for
large area vacuuming thanks to its large
reservoir capacity, the efficiency of its
suction and its low noise. Includes
two-position comb nozzle for
suctioning hard floors or
carpet, water nozzle
for floors, thin
nozzle for
access to
the
narrowest
places,
upholstery
nozzle, brush
nozzle, filter bag and water/dust filter.
TECHNICAL CHARACTERISTICS
CLEAN 330 ES-V16 (48-0017)
Water / dust vacuum cleaner
designed for DIY work to be
synchronized with electric
machines. Connect a sander,
polisher, saw, etc. Thanks to its tool
adapter and start to aspirate as it
starts to generate dust. Includes
water nozzle for floors, thin nozzle
for access to the narrowest places,
tool adapter, water filter, water/dust
filter.
TECHNICAL CHARACTERISTICS
Electric motor 230 V ~ 50 Hz
Electric motor 230 V ~ 50 Hz
Power 1.800 W
Power 1.400 W
Tank capacity 40 l
Tank capacity 30 l
Material of the tank stainless steel
Material of the tank polypropylene
Material of the tube stainless steel
Material of the tube polypropylene
AP
B
WATER/DUST VACUUM CLEANER
FILTER BAG
Garland • 152
F
AIR / WATER FILTER
S
AP
SYNCHRO
B
FILTER BAG
WATER/DUST VACUUM CLEANER
F
AIR/WATER FILTER
CLEAN 330 E-V16
(48-0016)
Multipurpose water / dust extractor for household cleaning. Includes two-position combi nozzle for
suctioning hard floors or carpet,
water nozzle for floors, thin nozzle
for access to the narrowest places,
upholstery nozzle, brush
nozzle, filter bag and
Water / dust filter.
TECHNICAL CHARACTERISTICS
CLEAN 104 E-V16 (48-0014)
The smallest water / dust cleaner on the market. Ideal for small
jobs but with the versatility of being able to vacuum any type of
solid or liquid material. Includes hook to hang it on the wall, thin
nozzle to access the narrowest
places, upholstery nozzle,
filter bag, water filter.
TECHNICAL CHARACTERISTICS
Electric motor 230 V ~ 50 Hz
Electric motor 230 V ~ 50 Hz
Power 1.400 W
Power 1.100 W
Tank capacity 30 l
Tank capacity 4 l
Material of the tank polypropylene
Material of the tank polypropylene
Material of the tube polypropylene
Material of the tube polypropylene
AP
F
WATER/DUST VACUUM CLEANER
F
AIR/WATER FILTER
FILTER BAG
AP
B
WATER/DUST VACUUM CLEANER
F
AIR/WATER FILTER
FILTER BAG
ASH 120 E-V16 (48-0021)
Vacuum cleaner specially
developed for the collection of
ashes of fireplaces, wood / pellet
/ charcoal stoves, barbecues ...
It has a by-pass motor and grid,
tubes and metallic accessories
for longer duration. Includes
round mouthpiece and fine metal
mouthpiece.
TECHNICAL CHARACTERISTICS
VACUUM CLEANER
Electric motor 230 V ~ 50 Hz
Power 850 W
Tank capacity 20 l
Material of the tank stainless steel
Material of the tube metal, with rubber
protection
A
ASPIRATION OF ASHES
T
TUBE AND METAL ACCESSORIES
Garland • 153
comercial@mcland.es
Download PDF

advertising