original instructions

6 Litre Oil Free Compressor
Welcome to Lumberjack!
Dear customer, Congratulations on your purchase. Before using the
Product for the first time please be sure to read these instructions for use.
They provide you with all information necessary for using the product safely and to
ensure its long service life.
Closely observe all safety information in these instructions!
General Power Tool Safety Warnings………………………………….…......01
Symbols & Cable Rating Chart ……….…………………………………….………05
Machine Details and Product features……….…………………………….….06
Operation, Maintenance and Service…………………………………………..08
Lumberjack Guarantee…………………………………………………………………09
Declaration of conformity……………………………………………………………10
Parts list……………………………………………………………………………………...11
Parts Diagram………………………………………………………………………………12
WARNING Read all safety warnings and
all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for
future reference. The term "power tool" in
the warnings refers to your electric (corded)
power tool or battery-operated (cordless) power
1. Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2. Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with grounded power tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with grounded surfaces,
such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk
of electric shock.
3. Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power
tools may result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off position before connecting to
power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your
finger on the switch or energising power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving
g) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
4. Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the switch does
not turn it on and off. Any power tool that
cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts and
any other condition that may affect the power
tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused
by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions, taking
into account the working conditions and the work
to be performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation.
5. Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
b) If the replacement of the supply cord is
necessary, this has to be done by the
manufacturer or its agent in order to avoid a
safety hazard.
6. Battery Tool Use and Care
a) Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
b) Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury or fire.
c) When Battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal object
that can make a connection from one terminal
to another. Shorting the battery terminals
together may cause burns or a fire.
8 Additional Safety Instructions for Paint
D) User abusive conditions, liquid may be
ejected from the battery; Avoid contact. If
contact accidentally occurs, flush with copious
amounts of water. If liquid contacts eyes, seek
medical help immediately. Liquid ejected from
the batter may cause irritation or burns.
8.2 Never heat up paints or solvents this can
lead to fires or explosions.
7 Additional Safety Instructions for
compressed air and blasting guns
7.1 During operation Compressor pump and
lines can become extremely hot. Touching
these parts is dangerous and will burn you.
7.2 Air which is compressed must be kept free
of any impurities which could cause fires or
explosions in the compressor pump.
7.3 Always secure the hose coupling as you
release it. This prevents injury caused by a
rebounding hose.
7.4 Wear Safety goggles when using the
blowout pistol. Eyes are extremely sensitive
and easily injured by small and large foreign
bodies, which are disturbed when using the
7.5 Do not use or point the Blowout pistol on
or at others.
7.6 Do not clean clothes or use on yourself
this can cause injury.
8.1 Do not use paints or solvents whose flash
points are below 55°C as there is a risk of
8.3 If using hazardous liquids, wear protective
face guards and adhere to all safety
information for the liquids provided by the
8.4 Do not smoke while operating and/or in the
work area. Paint vapours and other small
particulates are highly combustible and can
8.5 Evaluate the situation and wear suitable
clothing and masks if the situation calls for it.
8.6 Never set up or operate the machine while
near to or in the vicinity of a fire place, open
lights, sparking machines or any naked flame.
8.7 keep food and drink away from work area
paint vapours are damaging to your health.
8.8 Use in a well ventilated area.
8.9 Ensure that the work area is at least  .
8.10 Do not use materials such as white spirits,
Butyl Alcohol and methylene chloride with the
PVC hose. These materials will destroy the hose
damaging the product and creating an unsafe
work environment.
9 Additional Safety Instructions for operating
pressure vessels
9.1 Vessel must be kept in good working
order, any repair or maintenance work
necessary must be carried out immediately.
9.2 Supervisory authority may enforce
essential control measures in individual cases.
PRESSURE VESSEL. This can seriously
endanger workers or third parties.
9.4 Always check your pressure vessel for
signs or rust and damage before each use. Do
not use if found to be damaged.
10. Using an Extension Cable.
10.1. If an extension cable is required, use an
approved triple core extension cable suitable
for the power input of the tool.
10.2. Grounded tools always require a three
wire extension cable.
10.3. As the distance from the supply outlet
increases you must use a heavier gauge
extension cable. Using extension cables with
inadequately sized wire causes a serious drop in
voltage, resulting in loss of power and possible
tool damage.
10.4. The smaller the gauge number of the wire
the greater the capacity of the cord.
10.5. When using a cable reel, always unwind
the cable completely.
Danger! – Read the operating
instructions to reduce the risk of
Caution! Wear safety goggles.
Caution! Risk of Injury! Do
not reach into the running
saw blade.
Caution! Wear ear defenders. The
impact of noise can cause
damage to hearing.
Caution! Wear a dust mask.
0 – 2.0
2.1 – 3.4
3.5 - 5.0
5.1 – 7.1
7.1 – 12.0
12.1 – 20.0
Machine Details
Product Features
Oil less
Quick coupling valve
6Litre tank
Air flow rate 215L/min
Light at 10KG
Mains Voltage - 230V / 50Hz
Motor - 1200W/1.5HP
Compressor speed - 3450−1
Capacity – 6L
Rate – 215L/min
Operating pressure – approx. 8 bar
Sound power level  – 96 dB (A)
Weight – 11Kg
Package Contents:
Intended Use
Designed to generate compressed air
Using equipment in ways other than its intended use
the user and not the manufacture will be liable for any
damage or injuries caused.
Also note that this equipment is not designed for
commercial or industrial use. Warranty will be voided
if used for these purposes.
1 x 6L Air Compressor
1 Before starting to assemble the
1.1 Check equipment for damage which may
have occurred in transit. Report this
immediately to the carrier used for delivery.
1.2 Assemble and install near the area
intended to be used.
1.3 Avoid long electric wires and air lines.
1.4 Avoid Installing in a damp or wet
1.5 Check the air is dry and dust free.
1.6 You cannot use the compressor in an
area where work is conducted with sprayed
1.7 This compressor can only be used in
rooms with good ventilation and temperature
of +0 to +40°C.
1.8 Ensure there is no dust, acid, vapors,
explosive gasses or inflammable gases in the
2. Pressure
2.1 Safety valve is set to the maximum
pressure value for the vessel and it is
prohibited to adjust the safety valve or to
remove its lead seal.
2.2 pressure switch on-6bar/off-8bar.
3. Machine Failure Causes
3.1 Excessively high mains voltage.
3.2 Excessively high ambient temperature
and insufficient air supply.
3.3 Defective compressor valves or a leaking
non-return valve.
Maintenance, storing, cleaning and
pull out plug before performing any cleaning or
maintenance work.
Wait for the equipment to cool down before any
work to avoid burns.
Always depressurize the equipment before
carrying out cleaning or maintenance.
1 Cleaning
1.1 The equipment must be kept as free of dirt
and dust as possible.
1.2 It is recommended that the equipment is
cleaned immediately after you use it.
1.3 Do not clean the compressor with water,
solvents or the like.
1.4 Clean the filter at least every 80 operating
2 Maintenance work
2.1 After using the product release the vessel
2.2 After using the product drain off the
condensed water via the drain valve.
2.3 Turn the drain screw counter clockwise to
open and clockwise to close.
2.4 Check the container for rust or damage, if you
find any issues please contact supplier.
3. Storage
3.1 unplug the machine and ensure all
equipment disconnected and ventilated.
3.2 ensure the compressor cannot be accidently
started up again.
3.3 store in a dry location as moisture can
damage the vessel.
3.4 always store upright never tilted.
4. Pressure release
To release the excess pressure in the vessel
after use, connect an air tool and run in idle
mode until excess pressure has dissipated.
For the examination to take place clearly
1.1 Lumberjack guarantees that for a
period of 12 months from the date of
stating the Returns Material Authorisation
Number given.
purchase the components of qualifying
1.2.4 The fault in question is not caused by
products (see clauses 1.2.1 to 1.2.8) will
industrial use, accidental damage, fair wear
be free from defects caused by faulty
and tear, wilful damage, neglect, incorrect
construction or manufacture
electrical connection, misuse, alteration or
1.2 During this period, Lumberjack, will
repair of the product without approval.
repair or replace free of charge any parts
1.2.5 The product has been used in a
which are proved to be faulty in
domestic environment only.
accordance with paragraph 1.1 providing
1.2.6 The fault does not relate to
consumable items such as blades, bearings,
1.2.1 You follow the claims procedure set
drive belts or other wearing parts which
out in clause 2.
can reasonably be expected to wear at
1.2.2 Lumberjack and its Authorised
different rates depending on usage.
Dealers are given reasonable opportunity
1.2.7 The product has not been used for
after receiving notice of the claim to
hire purposes.
examine the product.
1.2.8 The product has been purchased by
1.2.3 If asked to do so by lumberjack or its
you, as the guarantee is not transferable
Authorised Dealer, you return the
from a private sale.
product at your own cost to Lumberjack’s
or the supplying Authorised Dealer’s
Premises -
2.4 Please note that it is essential that the letter of
2. Claims Procedure
claim reaches Lumberjack on the last day of this
2.1 In the first instance please contact the
Authorised Dealer who supplied the product to
guarantee at the latest. Late claims will not be
you. In our experience many initial problems
with machines that are thought to be fault due
to faulty parts are actually solved by correct
setting up or adjustment of the machine. A good
Authorised Dealer should be able to resolve the
majority of these issues much more quickly than
processing a claim under the guarantee. If a
return is requested by the Authorised Dealer or
3. Limitation of Liability.
3.1 We only supply products for domestic and
private use. You agree not to use the product for
any commercial, business or resale purposes and
we have no liability to you for any loss of profit,
loss of business, business interruption or loss of
business opportunity.
Lumberjack, you will be provided with a Returns
Material Authorisation Number which must be
3.2 This guarantee does not confer any rights
clearly stated on the returned package, and any
other than these expressly set out above and does
accompanying correspondence. Failure to
not cover any claims for consequential loss or
provide a Returns Material Authorisation
damage. This guarantee is offered as an extra
Number may result in item being refused
benefit and does not affect your statutory rights
as a consumer.
2.2 Any issues with the product resulting in a
4. Notice
potential claim under the guarantee must be
reported to the Authorised Dealer from which it
was purchased within 48 hours of receipt.
This guarantee applies to all product purchased
from an Authorised Dealer of Lumberjack within
the United Kingdom. Terms of guarantee may vary
in other countries.
2.3 If the authorised Dealer who supplied the
product to you has been unable to satisfy your
query, any claims made under this guarantee
should be made directly to Lumberjack. The
claim itself should be made in a letter setting out
the date and place of purchase, giving a brief
explanation of the problem which has led to the
Download PDF