Model SR4400 User Guide
AV Surround Receiver
SR4400N DFU_00_cover
Page 7
03.4.4, 9:03 AM
Adobe PageMaker 6.5J/PPC
ENGLISH
NEDERLANDS
WARRANTY
For warranty information, contact your local
Marantz distributor.
RETAIN YOUR PURCHASE RECEIPT
Your purchase receipt is your permanent record of
a valuable purchase. It should be kept in a safe
place to be referred to as necessary for insurance
purposes or when corresponding with Marantz.
IMPORTANT
When seeking warranty service, it is the
responsibility of the consumer to establish proof
and date of purchase. Your purchase receipt or
invoice is adequate for such proof.
FOR U.K. ONLY
This undertaking is in addition to a consumer's
statutory rights and does not affect those rights in
any way.
GARANTIE
Voor inlichtingen omtrent garantie dient u zich tot
uw plaatselijke Marantz.
UW KWITANTIE, KASSABON E.D. BEWAREN
Uw kwitantie, kassabon e.d. vormen uw bewijs van
aankoop van een waardevol artikel en dienen op
een veilige plaats bewaard te worden voor evt,
verwijzing bijv, in verbend met verzekering of bij
correspondentie met Marantz.
BELANGRIJK
Bij een evt, beroep op de garantie is het de
verantwoordelijkheid van de consument een
gedateerd bewijs van aankoop te tonen. Uw
kassabon of factuurzijn voldoende bewijs.
FRANÇAIS
GARANTIE
Pour des informations sur la garantie, contacter le
distributeur local Marantz.
CONSERVER L'ATTESTATION D'ACHAT
L'attestation d'achat est la preuve permanente
d'un achat de valeur. La conserver en lieu sur pour
s'y reporter aux fins d'obtention d'une couverture
d'assurance ou dans le cadre de correspondances
avec Marantz.
IMPORTANT
Pour l'obtention d'un service couvert par la
garantie, il incombe au client d'établir la preuve de
l'achat et d'en corroborer la date. Le reçu ou la
facture constituent des preuves suffisantes.
DEUTSCH
GARANTIE
Bei Garantiefragen wenden Sie sich bitte an Ihren
Marantz-Händler.
HEBEN SIE IHRE QUITTING GUT AUF
Die Quittung dient Ihnen als bleibende Unterlage
für Ihren wertvollen Einkauf Das Aufbewahren der
Quittung ist wichtig, da die darin enthaltenen
Angaben für Versicherungswecke oder bei
Korrespondenz mit Marantz angeführt werden
müssen.
WICHTIG!
Bei Garantiefragen muß der Kunde eine
Kaufunterlage mit Kaufdatum vorlegen. Ihren
Quittung oder Rechnung ist als Unterlage
ausreichend.
SR4400N DFU_00_cover
Page 1
ESPAÑOL
GARANTIA
Para obtener información acerca de la garantia
póngase en contacto con su distribuidor Marantz.
GUARDE SU RECIBO DE COMPRA
Su recibo de compra es su prueba permanente de
haber adquirido un aparato de valor, Este recibo
deberá guardarlo en un lugar seguro y utilizarlo
como referencia cuando tenga que hacer uso del
seguro o se ponga en contacto con Marantz.
IMPORTANTE
Cuando solicite el servicio otorgado por la garantia
el usuario tiene la responsabilidad de demonstrar
cuá¥do efectuó la compra. En este caso, su recibo
de compra será la prueba apropiada.
ITALIANO
GARANZIA
L’apparecchio è coperto da una garanzia di buon
funzionamento della durata di un anno, o del
periodo previsto dalla legge, a partire dalla data di
acquisto comprovata da un documento attestante
il nominativo del Rivenditore e la data di vendita.
La garanzia sarà prestata con la sostituzione o la
riparazione gratuita delle parti difettose.
Non sono coperti da garanzia difetti derivanti da
uso improprio, errata installazione, manutenzione
effettuata da personale non autorizzato o,
comunque, da circostanze che non possano
riferirsi a difetti di funzionamento dell’apparecchio.
Sono inoltre esclusi dalla garanzia gli interventi
inerenti l’installazione e l’allacciamento agli
impianti di alimentazione.
Gli apparecchi verranno riparati presso i nostri
Centri di Assistenza Autorizzati. Le spese ed i
rischi di trasporto sono a carico del cliente.
La casa costruttrice declina ogni responsabilità per
danni diretti o indiretti provocati dalla inosservanza
delle prescrizioni di installazione, uso e
manutenzione dettagliate nel presente manuale o
per guasti dovuti ad uso continuato a fini
professionali.
PORTUGUÊS
GARANTIA
Para informações sobre a garantia, contactar o
distribuidor Marantz local.
GUARDAR O RECIBO DE COMPRA
O recibo é o registo permanente da compra que
fez. Deve ser guardado num local seguro, para ser
apresentado em questões relacionadas com o
seguro ou para quando tiver de contactar a
Marantz.
IMPORTANTE
Quando procurar assisténcia técnica ao abrigo da
garantia, é da responsabilidade do consumidor
estabelecer a prova e data de compra. O recibe é
prova adequada.
SVENSKA
GARANTI
För information om garantin, kontakta Marantz
lokalagent.
SPAR KVITTOT
Kvittot är ett inköpsbevis på en värdefull vara. Det
skall förvaras säkert och hänvisas till vid
försäkringsfall eller vidkorrespondens mod
Marantz.
VIKTIGT
Fö att garantin skall gälla är det kundens sak att
framställa bevis och datum om köpet. Kvitto eller
faktura är tillräokligt bevis fö detta.
03.4.4, 9:03 AM
Adobe PageMaker 6.5J/PPC
DANSK
GARANTI
Henvend dem til Deres MARANTZ-forhandler
angående inrformation om garantien.
GEM DERES KVITTERING
Deres købskvittering er Deres varige bevis på et
dyrt køb. Den bør gemmes godt og anvendes som
bevis, hvis De vil tegne en forsikring, eller hvis De
kommunikerer med Marantz.
VIGTIGT
Det påhviler forbrugeren at skaffe bevis for købet
og købsdatoen, hvis han eller hun ønsker
garantiservice. Deres købskvittering eller faktura
er et fuldgyldigt bevis herpå.
CE MARKING
English
The SR4400 is in conformity with the EMC directive and low-voltage directive.
Français
Le SR4400 est conforme à la directive EMC et à la directive sur les basses tensions.
Deutsch
Das Modell SR4400 entspricht den EMC-Richtlinien und den Richtlinien für
Niederspannungsgeräte.
Nederlands
De SR4400 voldoet aan de EMC eisen en de vereisten voor laag-voltage.
Español
El SR4400 está de acuerdo con las normas EMC y las relacionadas con baja tensión.
Italiano
Il SR4400 è conforme alle direttive CEE ed a quelle per i bassi voltaggi.
Português
O SR4400 conforma com as diretrizes EMC e de baixa voltagem.
Svenska
SR4400 är tillverkad i enlighet med EMC direktiven och direktiven för lågvoltsutrusning.
Dansk
Model SR4400 er i overensstemmelse med EMC-direktiveet og direktivet om
lavspænding.
English
To ventilate the unit, do not install the unit in a rack
or bookshelf, and note the followings.
- Do not touch the top of the enclosure during operation.
- Do not block the openings in the enclosure
during operation.
- Do not insert objects beneath the unit.
- Do not block the ventilation slots at the top of the unit.
Do not place anything about 1 meter above the
top panel.
- Make a space of about 0.2 meter around the unit.
Français
Pour que l'appareil puisse être correctement
ventilé, ne pas l'installer dans un meuble ou une
bibliothèque et respecter ce qui suit.
- Ne pas toucher le dessus du coffret.
- Ne pas obstruer les ouïes de ventilation du
coffret pendant le fonctionnement.
- Ne placer aucun objet sous l'appareil.
- Ne pas obstruer les ouães de ventilation du
panneau supérieur. Ne placer aucun objet à
moins d'un mètre environ du panneau supérieur.
- Veiller à ce qu'aucun objet ne soit à moins de
0,2 mètre des côtés de l'appareil.
SR4400N DFU_00_cover
Page 2
Deutsch
Um eine einwandfreie Belüftung des Geräts zu
gewährleisten, darf das Gerät nicht in einem
Gestell oder Bücherregal aufgestellt werden; die
folgenden Punkte sind besonders zu beachten:
- Während des Betriebs das Oberteil des
Gehäuses nicht berühren.
- Während des Betriebs die Öffnungen im
Gehäuse nicht blockieren.
- Keine Gegenstände in das Gerät einführen.
- Die Belüftungsschlitze an der Oberseite des
Geräts dürfen nicht blockiert werden. Darauf
achten, daß über dem Gerät ein Freiraum von
mindestens 1 meter vorhanden ist.
- Auf allen Geräteseiten muß ein Zwischenraum
von ungefähr 0,2 meter vorhanden sein.
Nederlands
Installeer het toestel niet in een rek of boekenkast
waar de ventilatie mogelijk wordt gehinderd. Let
tevens op de volgende punten:
- Raak de bovenkant van het toestel niet aan als
het in gebruik is.
- Blokkeer de openingen van het toestel niet als
het in gebruik is.
- Plaats geen onderwerpen onder het toestel.
- Blokkeer de ventilatie-openingen aan de
bovenkant van het toestel niet. Zorg dat er
tenminste 1 meter vrije ruimte boven het toestel is.
- Zorg dat er 0,2 meter vrije ruimte rond het
toestel is.
Español
Para ventilar la unidad no la instale en una
estantería ni estante para libros, y tenga en cuenta
lo siguiente:
- No toque la parte superior de la caja durante el
funcionamiento.
- No tape las ranuras en la caja durante el
funcionamiento
- No ponga objetos debajo de la unidad.
- No tape las ranuras de ventilación de la parte
superior de la unidad. No ponga nada a menos
de 1 metro por encima del panel superior.
- Deje un espacio de unos 0,2 metro alrededor de
la unidad.
Italiano
Perch é l'unità possa essere sempre ben ventilata,
non installarla in scaffali o librerie e tenere
presente quanto segue.
- Non toccare la parte superiore del rivestimento
durante il funzionamento.
- Non bloccare le aperture sul rivestimento
durante il funzionamento.
- Non inserire oggetti al di sotto dell'unità.
- Non bloccare le fessure di ventilazione sopra
l'unità.
Non posare nulla per circa un metro sopra il
pannello superiore.
- Lasciare 0,2 metro liberi tutto intorno l'unità.
Svenska
För att ventilera enheten, ställ den inte i ett ställ
eller bokhylla och tänk på följande.
- Vidrör inte ytterhöljets ovansida under
pågående drift.
- Blockera inte öppningarna i ytterhöljet under
pågående drift.
- Stick inte in föremål under enheten.
- Blockera inte ventialtionshålen ovanpå enheten.
Placera inte någonting närmare än 1 meter
ovanför apparaten eller enheten.
- Se till att det finns omkring 0,2 meter fri plats
runt omkring enheten.
Dansk
Anbring ikke apparatet i et rack eller en boghylde,
da dette kan bloke luftcirkulationen omkring
apparatet. Iagttag ligeledes følgende:
- Berør ikke oversiden af kabinettet under
anvendelsen.
- Bloker ikke åbningerne i kabinettet under
anvendelsen.
- Stik ikke genstande ind under apparatet.
- Bloker ikke ventilationsåbningerne ovenpå
apparatet.
Anbring ikke noget nærmere end 1 m over
apparatets overside,
- Sørg for, at der er et frit område på omkring 0,2
m omkring apparatet.
Português
Para ventilar o aparelho, não instalá-lo dentro
duma estante ou algo similar, e observar as
seguintes recomendações:
- Não tocar a parte superior do aparelho durante
a operação.
- Não bloquear as aberturas do aparelho durante
a operação.
- Não insertar objectos debaixo do aparelho.
- Não bloquear as aberturas de ventilação na
parte de cima do aparelho. Deixar um espaço
completamente livre de cerca de 1 metro acima
do painel superior.
- Deixar um espaço de cerca de 0,2 metro ao
redor do aparelho.
03.4.4, 9:03 AM
Adobe PageMaker 6.5J/PPC
FOREWORD
FOREWORD ........................................ 1
BASIC OPERATION (PLAY BACK) .. 21
PRECAUTIONS ............................................................. 1
INSTALLATION .............................................................. 2
SELECTING AN INPUT SOURCE. .............................. 21
SELECTING THE SURROUND MODE ....................... 21
ADJUSTING THE MAIN VOLUME .............................. 21
ADJUSTING THE TONE (BASS & TREBLE)
CONTROL. ................................................................... 21
TEMPORARILY TURNING OFF THE SOUND ............ 21
USING THE SLEEP TIMER ......................................... 21
NIGHT MODE .............................................................. 22
INTRODUCTION .................................. 2
DESCRIPTION ..................................... 2
FEATURES .......................................... 3
ACCESSORIES ................................... 3
FRONT PANEL .................................... 4
FL DISPLAY ................................................................... 4
REAR PANEL ...................................... 5
REMOTE CONTROL OPERATION ..... 6
FUNCTION AND OPERATION ...................................... 6
PROGRAMMING THE REMOTE CONTROLLER ......... 7
OPERATION OF REMOTE CONTROL UNIT ................ 8
GENERAL INFROMATION OF RC5400SR
TO SR4400 .................................................................... 9
CONNECTIONS ................................. 10
SPEAKER PLACEMENT ............................................. 10
CONNECTING SPEAKERS ......................................... 10
CONNECTING AUDIO COMPONENTS ...................... 11
CONNECTING VIDEO COMPONENTS ...................... 12
ADVANCED CONNECTING ........................................ 13
CONNECTING REMOTE CONTROL JACKS .............. 13
CONNECTING THE ANTENNA TERMINALS .............. 14
SETUP ............................................... 15
SETUP MENU SYSTEM .............................................. 15
ENTER THE DESIRED MENU ITEM OF
THE SETUP MENU ..................................................... 15
SIMPLE SETUP ........................................................... 16
1. INPUT SETUP (ASSIGNABLE DIGITAL INPUT) ..... 16
2. SPEAKER SETUP ................................................... 17
3. PREFERENCE ......................................................... 19
4. PL II (DOLBY PRO LOGIC II ) ................................ 19
5. CS II (CIRCLE SURROUND II) ............................... 20
6. 6.1 CH INPUT LEVEL .............................................. 20
7. SURROUND ............................................................ 20
SURROUND MODE ........................... 22
OTHER FUNCTION ........................... 25
ATTENUATION TO ANALOG INPUT SIGNAL ............. 25
LISTENING OVER HEADPHONES ............................. 25
DIMMER (DISPLAY) .................................................... 25
SELECTING ANALOG AUDIO INPUT OR
DIGITAL AUDIO INPUT ................................................ 25
RECORDING AN ANALOG SOURCE ......................... 25
HT-EQ .......................................................................... 25
6.1 CH INPUT. .............................................................. 25
BASIC OPERATION (TUNER) .......... 26
LISTENING TO THE TUNER ....................................... 26
PRESET MEMORY ...................................................... 26
RDS OPERATION ........................................................ 28
TROUBLESHOOTING ....................... 29
TECHNICAL SPECIFICATIONS ....... 30
DIMENSION ....................................... 30
PRECAUTIONS
This section must be read before any connection
is made to the mains supply.
The following precautions should be taken when
operating the equipment.
GENERAL PRECAUTIONS
WARNINGS
Do not expose the equipment to rain or moisture.
Do not remove the cover from the equipment.
Do not insert anything into the equipment through
the ventilation holes.
Do not handle the mains lead with wet hands.
Do not cover the ventilation with any items such
as tablecloths, newspapers, curtains, etc.
No naked flame sources, such as lighted candles, should be placed on the equipment.
When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in
your country or area.
ENGLISH
TABLE OF CONTENTS
When siting the equipment ensure that:
— the ventilation holes are not covered;
— air is allowed to circulate freely around the
equipment
— it is on a vibration free-surface;
— it will not be exposed to interference from an
external source;
— it will not be exposed to excessive heat, cold,
moisture or dust;
— it will not be exposed to direct sunlight;
— it will not be exposed to electrostatic
discharges
Never place heavy objects on the equipment.
If a foreign body or water does enter the
equipment, contact your nearest dealer or service
center.
Do not pull out the plug by pulling on the mains
lead, hold the plug.
It is advisable when leaving the house, or during a
thunderstorm, to disconnect the equipment from
the mains supply.
EQUIPMENT MAINS WORKING SETTING
Your Marantz product has been prepared to
comply with the household power and safety
requirements that exist in your area.
SR4400 can be powered by 230 V AC only.
COPYRIGHT
Recording and playback of any material may
require consent. For further information refer to
the following:
— Copyright Act 1956
— Dramatic and Musical Performers Act 1958
— Performers Protection Acts 1963 and 1972
— any subsequent statutory enactments and
orders
PRECAUTIONS IN CONNECTION
• Be sure to unplug the power cable from the AC
outlet or turn off the POWER switch before
proceeding with any connection.
• Connect one cable at a time observing the
“input” and “output”.
This will avoid any cross connection between
channels and signal inputs and outputs.
• Insert the plugs securely. Incomplete connection
may result in noise.
• Prior to connecting other audio and video
equipment to the SR4400, please read their
owner’s manuals.
1
SR4400N DFU_01_ENG 1_2
Page 1
03.4.4, 9:05 AM
Adobe PageMaker 6.5J/PPC
ENGLISH
INSTALLATION
If this unit or another electronic device
incorporating a microcomputer is used at the
same time with the tuner or television, picture
disturbance or noise may occur. In such a case,
install the unit according to the following guide
points.
• Separate the unit as far as possible from the
television.
• Place the antenna wire for the tuner or TV apart
from the power cable and audio and video
connection cables of this unit.
• Since the phenomenon is likely to occur when
using an indoor antenna and/or 300-ohm feeder
wire, we recommend using an outdoor antenna
and 75-ohm coaxial cable.
INTRODUCTION
Thank you for purchasing the Marantz SR4400
Surround receiver.
This remarkable component has been engineered
to provide you with many years of home theater
enjoyment. Please take a few minutes to read this
manual thoroughly before you connect and
operate the SR4400.
As there are a number of connection and
configuration options, you are encouraged to
discuss your own particular home theater setup
with your Marantz A/V specialist dealer.
DESCRIPTION
CAUTIONS ON INSTALLATION
For heat dispersal, leave at least 20 cm/8 inch of
space between the top, back and sides of this unit
and the wall or other components.
• Do not obstruct the ventilation holes.
20 cm (8 ins.)
20 cm (8 ins.)
DTS was introduced in 1994 to provide 5.1
channels of discrete digital audio into home
theater systems.
DTS brings you premium quality discrete multichannel digital sound to both movies and music.
DTS is a multi-channel sound system designed to
create full range digital sound reproduction.
The no compromise DTS digital process sets the
standard of quality for cinema sound by delivering
an exact copy
of the studio master recordings to neighborhood
and home theaters.
Now, every moviegoer can hear the sound exactly
as the moviemaker intended.
DTS can be enjoyed in the home for either movies
or music on of DVD’s, LD’s, and CD’s.
“DTS” and “DTS Digital Surround” are registered
trademarks of Digital Theater Systems, Inc.
separation, but because of its mono, band-limited
surround it can be disappointing to users accustomed
to discrete multichannel.
Neo:6 offers several important improvements as
follow,
• Neo:6 provides up to six full-band channels of
matrix decoding from stereo matrix material.
Users with 6.1 and 5.1 systems will derive six
and five separate channels, respectively,
corresponding to the standard home-theater
speaker layouts.
• Neo:6 technology allows various sound
elements within a channel or channels to be
steered separately, and in a way which follows
naturally from the original presentation.
• Neo:6 offers a music mode to expand stereo
nonmatrix recordings into the five- or sixchannel layout, in a way which does not diminish
the subtlety and integrity of the original stereo
recording.
DTS-ES Extended Surround is a new multichannel digital signal format developed by Digital
Theater Systems Inc. While offering high
compatibility with the conventional DTS Digital
Surround format, DTS-ES Extended Surround
greatly improves the 360-degree surround
impression and space expression thanks to
further expanded surround signals. This format
has been used professionally in movie theaters
since 1999.
In addition to the 5.1 surround channels (FL, FR, C,
SL, SR and LFE), DTS-ES Extended Surround also
offers the SB (Surround Back) channel for surround
playback with a total of 6.1 channels. DTS-ES
Extended Surround includes two signal formats
with different surround signal recording methods,
as DTS-ES Discrete 6.1 and DTS-ES Matrix 6.1.
“DTS”, “DTS-ES Extended Surround” and “Neo:6”
are trademarks of Digital Theater Systems, Inc.
The advantages of discrete multichannel systems
over matrix are well known.
But even in homes equipped for discrete
multichannel, there remains a need for high-quality
matrix decoding. This is because of the large library
of matrix surround motion pictures available on disc
and on VHS tape; and analog television
broadcasts.
The typical matrix decoder of today derives a center
channel and a mono surround channel from twochannel matrix stereo material. It is better than a simple
matrix in that it includes steering logic to improve
2
SR4400N DFU_01_ENG 1_2
Page 2
Dolby Digital identifies the use of Dolby Digital
(AC-3) audio coding for such consumer formats
as DVD and DTV. As with film sound, Dolby Digital
can provide up to five full-range channels for left,
center, and right screen channels, independent
left and right surround channels, and a sixth ( ".1")
03.4.4, 9:05 AM
channel for low-frequency effects.
Dolby Surround Pro Logic II is an improved matrix
decoding technology that provides better spatiality
and directionality on Dolby Surround program
material; provides a convincing three-dimensional
soundfield on conventional stereo music
recordings; and is ideally suited to bring the
surround experience to automotive sound. While
conventional surround programming is fully
compatible with Dolby Surround Pro Logic II
decoders, soundtracks will be able to be encoded
specifically to take full advantage of Pro Logic II
playback, including separate left and right
surround channels. (Such material is also
compatible with conventional Pro Logic decoders.)
Dolby Digital EX creates six full-bandwidth output
channels from 5.1-channel sources. This is done
using a matrix decoder that derives three
surround channels from the two in the original
recording. For best results, Dolby Digital EX
should be used with movies soundtracks recorded
with Dolby Digital Surround EX.
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic”, and the
double-D symbol are trademarks of Dolby
Laboratories.
Circle Surround II (CS-II) is a powerful and
versatile multi-channel technology. CS-II is
designed to enable up to 6.1 multi-channel
surround sound playback from mono, stereo, CS
encoded sources and other matrix encoded
sources. In all cases the decoder extends it into 6
channels of surround audio and a LFE/subwoofer
signal. The CS-II decoder creates a listening
environment that places the listener “inside” music
performances and dramatically improves both hi-fi
audio conventional surround-encoded video
material. CS-II provides composite stereo rear
channels to greatly improve separation and image
positioning – adding a heightened sense of
realism to both audio and A/V productions.
CS-II is packed with other useful feature like dialog
clarity (SRS Dialog) for movies and cinema-like bass
enrichment (TruBass). CS-II can enable the dialog
to become clearer and more discernable in movies
and it enables the bass frequencies contained in the
original programming to more closely achieve low
frequencies – overcoming the low frequency
Adobe PageMaker 6.5J/PPC
FEATURES
BUILT-IN 6 CHANNEL POWER AMPLIFIER
WE
R
TV
VC
R1
R
DSS/V
CR2
CD
TA
D
AU
PE
DV
In a theater, center speaker is set behind the
screen and it attenuates high frequency sound so
high tone is recorded emphasized. This unit has
HT-EQ (Home Theater Equalizer) function. It
enables to play a movie in your home just like its
creator wanted.
X
M
R/
CD
P
D
SLEE
AM
P
M
E
D
ME
1
TO
CS
AY
PL
I
ST
OFF
S
3
5
S
/E
DT
EX
7
ST
M
DS
P
A/
6.1CH
6
8
EO
O
ER
EM
D
SS
9
0
IN
P.
AN
AN
SC
CH
LE
EB
TR
NE
L/
SK
IP
N
TU
OD
/AN
M
+/A
NU
2
4
M-CH
R
U
AU
HT
S
DI
CLEA
EN
SE
T.T TUP/
ON
E
CT
M
K
O
NIG
IRE
AIN
M O L.
V
UT
OS
S-D
AR
CH
SP
R
./R
/VC
DI
–/B
SE
E/
E
T
DS
EC
K
AT
F.D
IRE
T.
SY
CT
ST
EM
PT
RO
NT
CO
TE R
O S
M 400
RE C5
R
Y
LL
ER
This unit has Simple Setup function for easy
setup. You can setup all speaker settings by just
selecting your room size and the number of your
speakers with Simple Setup function. You can
also setup customized settings just like
conventional AV amplifiers.
PO
TUNE
/D
SIMPLE SETUP FUNCTION
Remote Controler RC5400SR
HT-EQ (HOME THEATER EQUALIZER) EQUIPPED
SC
High performance digital circuitry with 96 kHz / 24bit D/A converter for all 7 channels.
ACCESSORIES
DI
96 kHZ/24-BIT D/A CONVERTER FOR ALL
CHANNELS
Source Direct mode bypasses, tone controls and
bass management for purest audio quality.
BA
80 watts to each of the six main channels ; the
power amp section features an advanced,
premium high- storage power supply capacitors,
and fully discrete output stages housed in cast
aluminum heat sinks.
All channels are equipped the large size screw
type speaker terminals.
SOURCE DIRECT MODE
T V L.
VO
SRS Circle Surround II, SRS Dialog, SRS
symbol are trademarks
TruBass, SRS and
of SRS Labs, Inc.
SRS Circle Surround II, SRS Dialog and SRS
TruBass technology are incorporated under
license from SRS Labs, Inc.
ENGLISH
limitations of the speakers by full octave.
6.1 CHANNEL PRE-AMP OUTPUTS
6.1 channel pre-amp outputs for connection to
external components such as a subwoofer and
external power amplifiers.
AAA-size batteries X 2
6.1CH DIRECT INPUT
6.1ch direct inputs accommodate future multichannel sound formats or an external digital
decoder. (SACD, DVD-Audio, ...etc)
AM Loop Antenna
4 DIGITAL INPUTS AND 2 DIGITAL OUTPUTS
DTS-ES
DTS-ES decoder built in to decode the
impeccable 6.1-channel discrete digital audio
from DTS-ES encoded DVD-Video discs, DVDAudio discs and CDs.
4 Digital inputs for connection to other sources,
such as DVD player, Satellite tuner, CD player,
CD recorder or MD deck.
2 Digital outputs for connection to CD recorder
or MD deck.
FM Antenna
DOLBY DIGITAL EX
Dolby Digital EX decoder built in to create six fullband width output channels from the 5.1-channel
digital audio of DVDs, Digital TV, HDTV, satellite
broadcasts and other sources.
30 STATION RANDOM ACCESS PRESET TUNING
DOLBY PRO LOGIC II
RDS FUNCTION
Dolby Pro Logic II decoder provides better
spatiality and directionality on Dolby Surround
program material and provides a convincing threedimensional sound field on conventional stereo
music recordings.
High-quality AM/FM tuner with 30 station random
access preset tuning.
Radio Data System(RDS) provides information
on FM broadcasts.
AC Power Cord
DTS-NEO:6
Registration Card
DTS-Neo:6 decoder built in to decode 6.1channel surround sound from any stereo material.
User Guide
CIRCLE SURROUND II
CIRCLE SURROUND II decoder built in to
decode 6.1-channel surround sound from any
stereo or passive matrix-encoded material.
3
SR4400N DFU_01_ENG 1_2
Page 3
03.4.4, 9:05 AM
Adobe PageMaker 6.5J/PPC
ENGLISH
!0
FRONT PANEL
!4
!3
q
w
!5
e
t
r
!6
!7
y u i
o
AV SURROUND RECEIVER SR4400
SURROUND
VOLUME
DOWN
CLEAR
MEMORY
A/D
TUNING/PRESET
HT-EQ
F/P
S-DIRECT
UP
MODE
DISPLAY
MUTE
STANDBY
POWER ON/OFF
PHONES
6.1
CH-IN
TV
DVD
VCR1
DSS/VCR2
CDR/MD
TAPE
CD
These buttons are used to select the input
sources.
The video function selector, such as TV, DVD,
VCR1 and DSS/VCR2, selects video and audio
simultaneously.
Audio function sources such as CD, TAPE, CDR/
MD, TUNER, and 6.1CH-IN may be selected in
conjunction with a Video source.
This feature (Sound Injection) combines a sound
from one source with a picture from another.
Choose the video source first, and then choose a
different audio source to activate this function.
Press TUNER button to switch the between FM or
AM.
q
!1
POWER switch and STANDBY indicator
Press the button to turn the power ON, and press
again to turn it OFF. If the POWER switch is in the
ON position, the power of this unit can be turned
ON/OFF by pressing the POWER button on the
remote control unit.
When this unit is in the standby mode with the
POWER switch set to the ON position, pressing
one of the FUNCTION SELECTOR buttons also
allows to turn the power on.
The STANDBY indicator lights up when this unit is
the standby mode (power OFF) by the remote
control unit.
TUNING UP / DOWN buttons
Press thses buttons to change the frequency or
the preset number.
y
F/P (FREQUENCY / PRESET) button
During reception of AM or FM, you can change the
function of the UP/DOWN buttons for scanning
frequencies or selecting preset stations by
pressing this button.
u
S- (Source) DIRECT button
When this button is pressed, the tone control
circuitry is bypassed as well as Bass Management.
Notes:
• The surround mode is automatically switched to
AUTO when the source direct function is turned
on.
• S-DIRECT is turned off when the other surround
mode is selected with the SURROUND mode
selector knob or the surround mode buttons of the
remote controller.
• Additionally, Speaker Configurations are fixed
automatically as follow.
(Front SPKR = Large, Center SPKR = Large,
Surround SPKR = Large, Sub woofer = On)
!6
6.1CH IN button
Press this button to select the output of an external
multi channel decoder.
Press this button again to return the preivious
function.
!0
t
!5
TUNER
!1
!2
INPUT FUNCTION SELECTOR buttons
(AUDIO/ VIDEO)
MODE button
!2
DISPLAY button
When this button is pressed once, the display is
dimmed.
When this button is pressed twice, the display is
turned off and “DISP” indicator lights up.
Press this button again to turn the display ON
again.
PHONES jack for stereo headphones
This jack may be used to listen to the SR4400’s
output through a pair of headphones. Be certain
that the headphones have a standard 1 / 4" stereo
phone plug. Note that the speakers will
automatically be turned off when the headphone
jack is in use.
Notes:
• When using headphones, the surround mode will
automatically change to STEREO.
• The surround mode returns to the previous setting
as soon as the plug is removed from the jack.
!7
MUTE button
Press this button to mute the output to the
speakers and headphones. Press it again to
return to the previous volume level.
FL DISPLAY
as d
g h j kl¡0 ¡1
f
¡2
Press this button to select the auto stereo mode or
mono mode when the FM band is selected.
The “AUTO” indicator lights in the auto stereo
mode.
!3
Note:
• Available surround mode is depending on the
input signal.
i
Note:
• This button is not used for an input source that is
not set to a digital input in the system setup menu.
a
e
o
!4
This indicator blinks in generating the test tone in
speaker level setup.
w
SURROUND MODE Selector knob
When this knob is turned, the surround mode is
switched sequentially.
CLEAR button
Press this button to cancel the station-memory
setting mode or preset scan tuning.
r
MEMORY button
Press this button to enter the tuner preset memory
numbers or station names.
Infrared receiving (IR) sensor window
This window receives infrared signals for the
remote control unit.
VOLUME control knob
Adjusts the overall sound level. Turning the
control clockwise increases the sound level.
DISP
TEST
A/D (Analog/Digital) SELECTOR button
Page 4
CD
ST
TUNER
TUNED TAPE
DVD
TV
VCR1
6.1CH-IN
DIRECT
AUTO SURR
DSS / VCR2
CDR/ MD
NIGHT
SLEEP
ANALOG
EQ
DIGITAL
ATT
HT-EQ button
Used to turn on or off HT (Home Theater)-EQ
mode when the surround mode is set as AUTO,
DOLBY, DTS or STEREO.
This mode compensates for the audio portion of a
movie sounding “bright”. When this button is
pressed, “EQ” indicator lights up.
03.4.8, 10:56 AM
DIGITAL EX PCM
SURROUND 96kHz
L
This is used to select between the analog and
digital inputs.
SL
¡6
s
¡5 ¡4
C
R
LFE
S SR
¡3
TEST tone indicator
DISP (Display Off) indicator
This indicator lights when the SR4400 is in the
display off condition.
4
SR4400N DFU_01_ENG 1_2
AUTO
Adobe PageMaker 6.5J/PPC
TUNER’s indicators
AUTO : This indicator illuminates when the
tuner’s Auto mode is in use.
ST(Stereo) : This indicator illuminates when an
FM station is being tuned in stereo
condition.
TUNED : This indicator illuminates when a
station is being received with
sufficient signal strength to provide
acceptable listening quality.
f
INPUT SOURCE indicators
¡3
ENCODED CHANNEL STATUS
indicators
REAR PANEL
These indicators display the channels that are
encoded with a digital
input signal. If the selected digital input signal is
Dolby Digital 5.1ch or DTS 5.1ch, “L”, “C”, “R”,
“SL”, “SR” and “LFE” will light up.If the digital input
signal is 2 channel PCM-audio, “L” and “R” will be
displayed.
If Dolby Digital 5.1ch signal with Surround EX flag
or DTS-ES signal comes in, “L”, “C”, “R”, “SL”, “S”,
“SR” and “LFE” will show.
z
6.1 CHANNEL DIRECT IN indicator
h
AUTO.SURR (Auto Surround mode)
indicator.
This indicator illuminates to show that the AUTO
SURROUND mode is in use.
j
DIRECT (Soruce direct) indicator
This indicator lights when the SR4400 is in the
SOURCE DIRECT mode.
k
SLEEP timer indicator
This indicator lights when the seep timer function
is in use.
¡0
DIGITAL Input Indicator
This indicator lights when digital input has been
selected.
¡1
ANALOG input indicator
This indicator lights when an analog input source
has been selected.
¡2
DVD
IN
IN
VCR1
IN
DSS / VCR2
OUT
IN
AC IN
OUT
DVD IN
VCR1 IN
VIDEO
DVD
⁄2
b n
MONITOR
OUT
VCR1 OUT
MONITOR
OUT
S-VIDEO
VCR1
DSS / VCR2
CDR / MD
TAPE
CD
CENTER
SUB
WOOFER
CENTER
L
L
R
R
GND
ATT (Attenuation) indicator
IN
IN
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
FRONT
AUDIO
This indicator lights when the attenuation function
is active.
SURROUND
SURR.
BACK
SUB
WOOFER
SURR.
BACK
6.1CH INPUT
SURROUND
FRONT
PRE OUT
FM
(75
Ω)
75Ω
ANTENNA
MODEL NO. SR4400
IN
¡5
SERIAL NO.
NIGHT mode indicator
OUT
This indicator lights when the SR4400 is in the
Night mode, which reduces the dynamic range of
digital program material at low volume levels.
¡6
DIG.OUT
OPT
DIG-2 IN
DIG.OUT
COAX
DIGITAL
Main Information Display
This display shows messages relating to the
status, surround mode, tuner, volume level or
other aspects of unit’s operation.
DIG-1 IN
⁄1
z
DIG-3 IN
SURROUND
BACK
DIG-4 IN
CENTER
REMOTE
CONTROL
R
SURROUND
L
R
FRONT
⁄0
AC OUTLET
.
FM antenna terminal (75 ohms)
Connect an external FM antenna with a coaxial
cable, or a cable network FM source.
AM antenna and ground terminals
Connect the supplied AM loop antenna. Use the
terminals marked “AM” and “GND”. The supplied
AM loop antenna will provide good AM reception
in most areas. Position the loop antenna until you
hear the best
x
SWITCHED 100W MAX
L
SPEAKER SYSTEMS
EQ mode indicator
This indicator lights when the HT-EQ function is
active.
l
TV
v
AM
¡4
This indicator lights up when the 6.1CH-IN has
been selected as a input source.
c
TV
These indicators show the current input source.
g
x
ENGLISH
d
AUDIO IN/OUT (CD, TAPE, CDR/MD, TV,
DVD, VCR1, DSS/VCR2)
These are the analog audio inputs and outputs.
There are 7 audio inputs (4 of which are linked to
video inputs) and 4 audio outputs (2 of which are
linked to video outputs). The audio jacks are
nominally labeled for cassette tape decks,
compact disc players,DVD players and etc.... The
audio inputs and outputs require RCA-type
connectors.
SIGNAL FORMAT indicators
,
c
⁄3
m
VIDEO IN/OUT (TV, DVD, VCR1 and DSS/
VCR2)
There are 4 composite video inputs and 2
composite video outputs. Connect VCR, DVD
player, and other video components to the video
input.
The output channels can be used to be connected
to video recorder for making recordings.
v
S-VIDEO IN/OUT
There are 2 S-VIDEO inputs and one S-VIDEO
output.
Connect VCR, DVD player, and other video
components to the S-VIDEO input.
The output channel can be used to be connected
to video recorder for making recordings.
S-VIDEO sources can be viewed through the SVIDEO output, and composite sources can only
be viewed through the composite output.
b
MONITOR OUT
There are 2 monitor outputs and each one
includes both composite video and S-video
configurations.
2 DIGITAL, EX, 2 SURROUND, dts, ES, PCM
and 96kHz
When the selected input is a digital source, some
of these indicators will light to display the specific
type of signal in use.
5
SR4400N DFU_01_ENG 1_2
Page 5
03.4.4, 9:06 AM
Adobe PageMaker 6.5J/PPC
ENGLISH
n
⁄1
Subwoofer Output
Connect this jack to the line level input of a
powered subwoofer. If an external subwoofer
amplifier is used, connect this jack to the
subwoofer amplifier input. If you are using two
subwoofers, either powered or with a 2 channel
subwoofer amplifier, connect a “Y” connector to
the subwoofer output jack and run one cable from
it to each subwoofer amplifier.
m
Preamp Outputs (L, R, SL, SR, SB, C)
Jacks for L (front left), R (front right), C (Center),
SL (surround left), SR (surround right) and SB
(surround back).
Use these jacks for connection to some external
power amplifiers.
,
6.1 CHANNEL INPUT
By connecting a DVD Audio player, SACD multi
channel player, or other component that has a
multi channel port, you can playback the audio
with 5.1 channel or 6.1 channel output.
.
Speaker outputs terminals
Six terminals are provided for the front left, front
right, front center, surround left, surround right
and surround back speakers.
⁄0
REMOTE CONT. IN/OUT terminals
Connect to a Marantz component equipped with
remote control (RC-5) terminals.
DIGITAL INPUT (Dig.1 - 4) / OUTPUT
(coaxial, optical)
These are the digital audio inputs and outputs.
There are 2 digital inputs with coaxial jacks, 2 with
optical jacks.
The inputs accept digital audio signals from a
compact disc, LD, DVD, or other digital source
component.
For digital output, there is 1 coaxial output and 1
optical output.
The digital outputs can be connected to MD
recorders, CD recorders, DAT decks, or other
similar components.
⁄2
REMOTE CONTROL
OPERATION
z
FUNCTION AND OPERATION
x
The provided remote control unit is a universal remote controller. The POWER button, numeric buttons and control buttons are used in common across
different input source components.
The input source controlled with the remote control
unit changes when one of the input selector buttons is pressed.
AC INLET
Plug the supplied power cord into this AC INLET
and then into the power outlet on the wall.
POWER
⁄3
TV
VCR1
DSS/VCR2
DVD
TUNER
CD
TAPE
CDR/MD
AC OUTLET
Connect the AC power cables of components
such as a DVD and CD player to this outlet.
SWITCHED outlet is provided.
The marked SWITCHED provides power only
when the SR4400 is turned on and is useful for
components which you use every time you play
your system.
Cautions:
• In order to avoid potential turn-off thumps,
anything plugged in here should be powered up
before the SR4400 is turned on.
• The capacity of this AC outlet is 100W. Do not
connect devices that consume electricity more
than the capacity to this AC outlet. If total power
consumption of connected devices exceeds the
capacity, protection circuit shuts down the power
supply.
¤4
¤3
¤2
z
x
TV
VOL.
AUX
AMP
SLEEP
MUTE
OSD
MAIN
VOL.
MENU
SETUP/
T.TONE
S-DIRECT
,
MENU OFF
AUTO
DTS
1
2
3
NIGHT
CSII
EX/ES
DSP
4
5
6
DISPLAY
M-CH ST
STEREO
6.1CH IN
7
8
9
MEMO
A/D
P.SCAN
CLEAR
0
CHANNEL/SKIP
BASS
TREBLE
MODE
v
b
n
m
OK
¤1
¤0
⁄9
⁄8
⁄7
⁄6
⁄5
⁄4
c
Transmitting indicator
Lights up during a button is pressed and an infrared
signal is sending.
(Main) POWER buttons
Press to switch the power of the SR4400 ON or OFF
after pressing the AMP button.
c
Input selector buttons/ FUNCTION
SELECTOR buttons (AUDIO/VIDEO INPUT)
These buttons are used to select a Audio or Video
source component. Press one of these buttons once
to change the function of the remote control. Press
same button within 2 seconds, the input function of
the SR4400 is changed.
Note:
• CDR/MD button is set CDR function at initial. To
switch MD function, press and hold down CDR/
MD button and press 2 button.
• To return CDR function, press and hold down
CDR/MD button and press 1 button.
• AUX button is unavailable for SR4400.
v
MAIN VOLUME UP ( ) /DOWN ( ) buttons
Main volume control of the SR4400. The front, surround, center and subwoofer channel volumes controlled by these buttons simultaneously.
b
MUTE button
.
⁄0
⁄1
Muting button of the SR4400. Press this button decrease the sound temporarily . Press this button
again to return to the previous sound.
When this button is pressed, “MUTE” indicator lights
up.
⁄2
n
TUNE/SEARCH
DISP./RDS
F.DIRECT
MENU button
This button is used to enter the SETUP MAIN MENU.
+/A /ANT
–/B /VCR
ATT.
PTY
⁄3
DISC/DECK
SYSTEM REMOTE CONTROLLER
RC5400SR
m
Cursor buttons ( , , , , OK)
Use these button when operating the SETUP MAIN
MENU.
See page 15.
,
MENU OFF button
This button is used to exit from the SETUP MAIN
MENU.
6
SR4400N DFU_01_ENG 1_2
Page 6
03.4.4, 9:06 AM
Adobe PageMaker 6.5J/PPC
Numeric buttons 1 to 9 (A, B, C ... Z, –) /
Surround mode buttons
Numeric buttons
These buttons are used to enter figures in the selection of a tuner preset station and station name preset or to set select a CD track number, etc. The functions of these buttons are dependent on the function
button selected.
Surround mode buttons (when AMP mode is
selected)
These buttons are used to select the surround mode.
Note:
• The surround mode is set to 6-Stereo mode by
pressing M-CH ST button.
⁄0
P.SCAN (preset scan) button (when TUNER
mode is selected)
This button is used to start preset scan when
SR4400 is selected TUNER mode.
⁄1
0 / A/D button
0 button
This button is used to enter the number “0”
A/D button (when AMP mode is selected)
This is used to switch between the analog and
digital inputs.
⁄2
CONTROL buttons
These buttons are used when operating the CD
player, TAPE deck, etc.
The function of these buttons are dependent on the
function button selected.
For the controllable functions of each input function,
please refer to contrable function table on the page 9.
⁄3
⁄4
TREBLE UP ( ) /DOWN ( ) buttons
These buttons are used to adjust the tone control of
high frequency sound for left and right speaker.
⁄5
BASS UP ( ) /DOWN ( ) buttons
These buttons are used to adjust the tone control of
low frequency sound for left, right and subwoofer
speaker.
⁄6
MEMO button
Memory enable button for various preset functions.
⁄7
¤2
OSD button
Note:
• This button is unavailable for SR4400.
¤3
SLEEP (sleep timer) button
This button is used for setting the sleep timer. It
can be operated the same way as the button in unit.
¤4
TV VOLUME UP ( ) /DOWN ( ) buttons
These buttons increase or decrease TV’s volume.
DISPLAY button
When this button is pressed once, the display is
dimmed.
When this button is pressed twice, the display is
turned off and the “DISPLAY OFF” indicator lights
up.
Press this button again to turn on the display
again.
PROGRAMMING WITH THE 4-DIGIT CODE
OK
1.
TV
⁄9
Note:
• This function is unavailable during the digital
input is selected.
CD
DSS/VCR2
TAPE
DVD
S-DIRECT
MENU OFF
AUTO
DTS
1
2
3
NIGHT
CSII
EX/ES
DSP
4
5
6
DISPLAY
M-CH ST
STEREO
6.1CH IN
7
8
9
CLEAR
MEMO
A/D
P.SCAN
CDR/MD
0
1.
TV
VOL.
AUX
AMP
SLEEP
MUTE
MAIN
VOL.
2.
CHANNEL/SKIP
BASS
2.
3.
TUNE/SEARCH
DISP./RDS
F.DIRECT
ATT.
PTY
MENU
+/A /ANT
1.
TREBLE
MODE
OSD
–/B /VCR
Press and hold down the function button for
the appliance which should be controlled and
press SETUP until the indicator blinks twice.
Press the 4-digit code for appliance (code
table at the end of this book)
When the procedure is successful, the
indicator will blink twice.
Note:
• If the indicator did not blink twice, then repeat
steps 1 through 2 and try entering the same code
again.
S- ( Source) DIRECT button
When this button is pressed, the tone control
circuit is bypassed as well as Bass Management.
¤1
VCR1
TUNER
NIGHT button
Pressing this button prevents the Dolby Digital signal from playback at a loud voice. This function reduces the voice by 1/3 to 1/4 at maximum. Thus, it
eliminates the occurrence of an abruptly loud voice
at night. However, the function is valid only for the
case when the Dolby Digital signal is entered into
OPTICAL or COAXIAL and data to compress the
voice exists in the signal to be played back.
When this button is pressed, “NIGHT” indicator lights
up.
¤0
SETUP/
T.TONE
POWER
ATT (attenuator) button
When the input signal is too high and the voice distorts even by throttling the SR4400 VOLUME control, turn on this function. “ATT” is indicated when
this function is activated.
The input level is reduced. Attenuator is invalid for
use with the output signal of “REC OUT”.
The remote controller RC5400SR must be
programmed to use the codes for your appliances
of different brands. This is done by keying in a 4digit code or by scanning the codes until the
correct one is found. We recommend to using the
4-digit code. This mode is faster and more
reliable. The code scanning method should be
used only if you cannot find the code for one of
your appliances. The codes are listed at the end
of this book.
Important:
• Use the remote control buttons for programming,
not the buttons of the receiver or other
appliances.
• Some codes may be not match your equipment.
In this case, your equipment cannot be
controlled with this remote controller.
CLEAR button
This button is used to cancel for certain memory
or programming operations.
⁄8
PROGRAMMING THE REMOTE
CONTROLLER
ENGLISH
.
SETUP / T.TONE button
Test tone function is used for adjusting the balance
between the volume levels of speaker channels.
Press AMP button and press this button to enter the
test tone mode.
7
SR4400N DFU_01_ENG 1_2
Page 7
03.4.4, 9:06 AM
Adobe PageMaker 6.5J/PPC
ENGLISH
SCANNING THE CODE TABLE
RESETTING THE ALL CODE
OSD
OSD
POWER
MENU
OK
POWER
TV
VCR1
TUNER
CD
AUX
2.
TV
VOL.
SLEEP
DSS/VCR2
TAPE
DVD
CDR/MD
AMP
MAIN
VOL.
MUTE
OSD
2.
6.
3.
SETUP/
T.TONE
1
2
3
NIGHT
CSII
EX/ES
DSP
4
5
DISPLAY
M-CH ST
STEREO
7
8
9
CLEAR
MEMO
A/D
P.SCAN
6
CHANNEL/SKIP
TREBLE
TV
VCR1
DSS/VCR2
DVD
TUNER
CD
TAPE
CDR/MD
2.
3.
4.
5.
6.
1.
SETUP/
T.TONE
S-DIRECT
TUNE/SEARCH
AUX
TV
VOL.
1.
SLEEP
Switch on the appliance which should be
controlled.
Press and hold down the function button for
appliance which should be controlled and
press SETUP until the indicator blinking
twice.
Press the code 9 - 9 - 1.
The indicator will blink twice.
Aim the remote control at the appliance and
slowly alternate between pressing POWER
and the function button for the appliance.
Stop when the appliance turns off.
Press SETUP once to lock in the code.
1.
2.
AMP
MUTE
MENU
MAIN
VOL.
2.
MENU OFF
AUTO
1
DTS
2
3
NIGHT
CSII
4
5
6
DISPLAY
M-CH ST
STEREO
6.1CH IN
7
8
9
A/D
P.SCAN
6.1CH IN
0
BASS
MENU
DTS
AUTO
CLEAR
MEMO
EX/ES
DSP
0
CHANNEL/SKIP
BASS
TREBLE
3.
REMOTE CONTROL
OK
MENU OFF
S-DIRECT
OSD
1.
OPERATION OF REMOTE CONTROL
UNIT
MENU
The distance between the transmitter of the
remote control unit and the IR SENSOR of the
SR4400 should be less than about 5 meters. If the
transmitter is pointed to a direction other than the
IR SENSOR or if there is an obstacle between
them, remote control may not be possible.
TUNE/SEARCH
Press and hold down the any function button
and press SETUP until the indicator blinking
twice.
Press the code 9 - 8 - 1.
The indicator will blink twice.
Then, RC5400SR will return to the factory
preset code.
Remote-controllable range
SR4400
A
Note:
• After this procedure, the selected function button
is set initial code and other function buttons are
set initial code too.
o
ppr
x. 5
m
60°
Remote control unit (RC5400SR)
CHECKING THE CODE
POWER
TV
VCR1
TUNER
CD
DSS/VCR2
TAPE
DVD
CDR/MD
1.
3.
4.
SETUP/
T.TONE
AUTO
1
2
3
NIGHT
CSII
EX/ES
DSP
4
5
6
DISPLAY
M-CH ST
STEREO
6.1CH IN
7
8
9
MEMO
A/D
P.SCAN
1.
2.
3.
4.
DTS
0
AUX
AMP
SLEEP
MUTE
OSD
MENU OFF
S-DIRECT
CLEAR
TV
VOL.
Once you have found and the codes for your various
appliances, you may want to write them down here.
OK
MAIN
VOL.
2.
CHANNEL/SKIP
BASS
TREBLE
MODE
MENU
LOADING BATTERIES
VCR
The life of the batteries used with the remote
control unit is about 4 months with normal use.
Also be sure to replace batteries earlier when you
notice that they are getting weak.
DSS
1.
Remove the back cover.
2.
Insert the new batteries (AAA type) with
and
polarity.
correct
TV
TUNE/SEARCH
DISP./RDS
F.DIRECT
Press and hold down the function button for
appliance which should be controlled and
press SETUP until the indicator blinking twice.
Press the code 9 - 9 - 0.
The indicator will blink twice.
To view the code for first digit, press 1 once.
Wait 3 seconds, count the indicator blinks
(e.g. 3 blinks = 3) and write down the number.
Note:
If a code digit is “0”, the indicator will not blink.
Repeat step 3 three more times for remaining
digits. Use 2 for the second digit, 3 for the
third digit, and 4 for the fourth digit.
DVD
CD
TAPE
CDR
MD
8
SR4400N DFU_01_ENG 1_2
Page 8
03.4.4, 9:06 AM
Adobe PageMaker 6.5J/PPC
Close until it clicks.
THE CONTRABLE FUNCTION TABLE
To control the SR4400 by your RC5400SR, you have to select the device AMP or TUNER by function
selector button. Please refer as below for the deatails in AMP and TUNER mode.
POWER
AMP MODE
POWER
TV
VCR1
DSS/VCR2
DVD
TUNER
CD
TAPE
CDR/MD
TV
VOL.
AUX
AMP
SLEEP
MUTE
OSD
MAIN
VOL.
MENU
OK
SETUP/
T.TONE
MENU OFF
DTS
S-DIRECT
AUTO
1
2
3
NIGHT
CSII
EX/ES
DSP
4
5
6
DISPLAY
M-CH ST
STEREO
7
8
9
CLEAR
MEMO
A/D
P.SCAN
6.1CH IN
0
CHANNEL/SKIP
BASS
TREBLE
TUNE/SEARCH
MODE
–/B /VCR
+/A /ANT
DISP./RDS
F.DIRECT
ATT.
PTY
DISC/DECK
SYSTEM REMOTE CONTROLLER
RC5400SR
POWER
Turns the SR4400 on and off
Function selector * Selects a particular source component
AUX button is unavailable for SR4400.
SLEEP *
Sets the sleep timer function
MUTE *
Decreases the sound temporarily
VOL 34 *
Adjusts the over all sound level
MENU
Enters the SETUP MENU
Cursor
Moves the cursor for setting in SETUP MENU
OK
• Enters the SETUP MENU
• Confirms the setting in SETUP MENU
SETUP/T.TONE Enters the test tone mode for setting the Speaker Level Setup
MENU OFF
Exits from the SETUP MENU
S-DIRECT *
Selects the Source Direct mode
NIGHT *
Turns on or off NIGHT mode
Surround mode (1-8) Selects the surround mode
6.1CH-IN (9)
Selects the 6.1CH IN
A/D (0)
Switches between the analog and digital inputs
BASS 34 *
Adjusts the tone control of low frequency sound
TREBLE 34 * Adjusts the tone control of high frequency sound
ATT *
Reduces the input level
* These buttons are used to control SR4400 in any function mode.
TUNER MODE
POWER
TV
VCR1
DSS/VCR2
DVD
TUNER
CD
TAPE
CDR/MD
TV
VOL.
AUX
AMP
SLEEP
MUTE
OSD
MAIN
VOL.
MENU
OK
SETUP/
T.TONE
MENU OFF
S-DIRECT
AUTO
1
2
NIGHT
CSII
EX/ES
4
5
6
DISPLAY
M-CH ST
STEREO
6.1CH IN
7
8
9
CLEAR
MEMO
A/D
P.SCAN
DTS
3
DSP
0
CHANNEL/SKIP
BASS
TREBLE
MODE
+/A /ANT
–/B /VCR
TUNE/SEARCH
DISP./RDS
F.DIRECT
ATT.
PTY
TUNER
0-9
CLEAR
MEMO
P.SCAN
CHANNEL/SKIP
4/¢
TUNE/SEARCH
5/6
MODE 1 2
DISP./RDS ;
F.DIRECT 2
PTY 9
Selects the auto stereo mode or mono mode
Selects the display mode in RDS
Selects the “Frequency direct input”
Displays the programme type information of the current station
SYSTEM REMOTE CONTROLLER
RC5400SR
Page 9
TV
VCR1
DSS/VCR2
DVD
TUNER
CD
TAPE
CDR/MD
TV
VOL.
AUX
AMP
SLEEP
MUTE
OSD
MAIN
VOL.
MENU
OK
SETUP/
T.TONE
MENU OFF
DTS
S-DIRECT
AUTO
1
2
NIGHT
CSII
EX/ES
4
5
6
DISPLAY
M-CH ST
STEREO
6.1CH IN
CLEAR
MEMO
7
3
DSP
8
9
A/D
P.SCAN
0
CHANNEL/SKIP
BASS
TREBLE
MODE
+/A /ANT
–/B /VCR
TUNE/SEARCH
DISP./RDS
F.DIRECT
ATT.
PTY
DISC/DECK
SYSTEM REMOTE CONTROLLER
RC5400SR
TV
POWER
CALL UP
MENU
Cursor
OK
VCR
POWER
CALL UP
MENU
Cursor
OK
SETUP/T.TONE
–
–
MENU OFF
–
POWER
MENU
Cursor
OK
DVD
POWER
CALL UP
MENU
Cursor
OK
SETUP
MENU
DSS
POWER
CALL UP
MENU
Cursor
OK
CD
POWER
TAPE
POWER
CDR
POWER
MD
POWER
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
CLEAR
INPUT
NUMERIC
INPUT
CLEAR
CANCEL
MENU
INPUT
NUMERIC
TAPE
SPEED
MEMO
–
–
CH–
CH+
–
–
–
–
CH
DISPLAY
–
VIDEO
VIDEO
–
PREV
NEXT
REWIND
FF
REC
–
INPUT
NUMERIC
INPUT
CLEAR
CALL
PROGRAM
PREV
NEXT
REWIND
FF
–
–
PAUSE
PAUSE
–
PAUSE
PAUSE
PAUSE
PAUSE
PLAY
TV/VCR
TV/VCR
STOP
PLAY
DISC+
DISC+
STOP
–
–
–
–
PLAY
DISC+
DISC–
STOP
PLAY
DECK A
DECK B
STOP
PLAY
–
–
STOP
PLAY
–
–
STOP
0-9
CHANNEL/SKIP 4
CHANNEL/SKIP ¢
TUNE/SEARCH 5
TUNE/SEARCH 6
0 (REC)
MODE 1 2
DISP/RDS ;
F.DIRECT 2
+/A/ANT
+/B/VCR
PTY 9
DISC/DECK
SR4400N DFU_01_ENG 1_2
Selects a frequency band
Inputs the numeric
Clears the inputting
Enters the tuner preset memory numbers
Starts preset scan
• Selects a preset station
• Changes a PTY type
Tunes a station
ENGLISH
GENERAL INFROMATION OF RC5400SR TO SR4400
–
CANCEL
MENU
INPUT
NUMERIC
–
–
–
–
–
–
–
–
INPUT
INPUT
INPUT
INPUT
NUMERIC NUMERIC NUMERIC NUMERIC
INPUT
INPUT
INPUT
INPUT
CLEAR
CLEAR
CLEAR
CLEAR
CALL
CALL
CALL
–
PROGRAM PROGRAM
PROGRAM
PREV
PREV
PREV
PREV
NEXT
NEXT
NEXT
NEXT
REWIND
REWIND
REWIND
REWIND
FF
FF
FF
FF
–
REC
REC
REC
–
DIRECTION
–
–
9
03.4.4, 9:06 AM
Adobe PageMaker 6.5J/PPC
ENGLISH
CONNECTIONS
SPEAKER PLACEMENT
The ideal surround speaker system for this unit is
7-speaker systems, using front left and right
speakers, a center speaker, surround left and
right speakers, a surround back and a subwoofer.
For best results we recommend that all front
speakers be of the same type, with identical or
similar driver units. This will deliver smooth pans
across the front sound stage as the action moves
from side to side.
Your center channel speaker is very important as
over 80 % of the dialog from a typical motion
picture emanates from the center channel.
It should possess similar sonic characteristics to
the main speakers. Surround channel speakers
need not be identical to the front channel
speakers, but they should be of high quality.
The surround center speaker is useful for
playback of Dolby Digital Surround EX or DTSES. One of the benefits of both Dolby Digital (AC3) and DTS is that surround channels are discrete
full range, while they were frequency limited in
earlier “Pro Logic’ type systems.
Bass effects are an important part of home
theater. For optimal enjoyment a subwoofer
should be used as it is optimized for low frequency
reproduction. If you have full range front speakers,
however, they may be used in place of a
subwoofer with proper setting of the switches in
the menu system.
Surround
Left
Surround left and right speakers
Place the speakers right beside of the listening
position or a little forward. Do not place the
speakers backward of the listening position.
Surround back speaker
Place the speaker behind of the listening position.
Subwoofer
We recommend to use a sub-woofer to have
maximum bass effect. Sub-woofer bears only low
frequency range so you can place it anywhere in
the room.
CONNECTING SPEAKERS
SURROUND
SURROUND
BACK
RIGHT
POWERED
SUBWOOFER
LEFT
or
BTL
EXT. CONT. IN
VIDEO/
MINIMUM 4 OHMS
HEIGHT OF THE SPEAKER UNITS
Front left and right speakers, and a center
speaker
Align the tweeters and mid-range drivers on the
three front speakers on the same height as well as
possible.
Surround left and right speakers, and surround
back speaker
Place the surround left, right and surround back
speakers higher to your ears (70cm – 1m). Also
place the speakers on the same height.
TV
IN
DVD
DSS / VCR2
VCR1
IN
OUT
IN
IN
MONITOR
OUT
OUT
DVD IN
VCR1 IN
DVD
VCR1 OUT
MONITOR
OUT
S-VIDEO
VIDEO
TV
DSS / VCR2
VCR1
CDR / MD
TAPE
CD
CENTER
SUB
WOOFER
CENTER
L
L
R
R
AM
GND
IN
IN
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
AUDIO
FRONT
SURROUND
SURR.
SUB
SURR.
BACK
WOOFER
BACK
6.1CH INPUT
SURROUND
FRONT
PRE OUT
FM
(75½)
ANTENNA
MODEL NO. SR4400
IN
OUT
DIG.OUT
OPT
DIG-1 IN
REMOTE CONT.
SYSTEM OUT
F US E
DIG-2 IN
DIG.OUT
T
COAX
DIGITAL
DIG-3 IN
SURROUND
DIG-4 IN
BACK
REMOTE
CENTER
R
SURROUND
L
R
FRONT
L
SPEAKER SYSTEMS
CONTROL
70cm
1m
CENTER
RIGHT
LEFT
FRONT
Note:
• Use magnetically-shielded speakers for front left,
right and the center speakers when the speakers
are installed near the TV and the TV is a monitor
type.
03.4.4, 9:06 AM
SWITCHED
100W MAX
AC OUTLET
10
Page 10
MAX
+5~13V DC
Front left and right speakers
We recommend to set the front L and R speakers
with 45-60 degrees from the listening position.
Center speaker
Align the front line of the center speaker with the
front L/R speakers. Or place the center speaker a
little backward from the line.
SR4400N DFU_01_ENG 1_2
INPUT
LEVEL
MASTER SLAVE
Surround
Back
Surround
Right
INPUT
SPEAKER SYSTEM
Front
Left
Front
Right
INVERT
OUTPUT
MIN
Subwoofer
Front
Center
POWER
AMPLIFIER
Adobe PageMaker 6.5J/PPC
OUT
IN
PASSIVE
SUBWOOFER
1.
2.
Strip away approx. 10 mm of wire insulation.
Twist the bared wire ends tight to prevent
short circuits.
Loosen the knob by turning counterclockwise.
Insert the bare part of the wire into the hole in
the side of each terminal.
Tighten the knob by turning clockwise to
secure the wire.
3.
4.
5.
1.
The output audio signal from the TAPE OUT jack
and the CD-R/MD OUT jack is the sound source
currently selected.
CONNECTING AUDIO COMPONENTS
TAPE DECK
CD PLAYER
CD RECORDER / MD DECK
2.
OUT IN
L
DIGITAL
L OUTPUT
R
R
DIGITAL OUT
OUTPUT
L
L
L
R
R
R
DIGITAL
INPUT
Caution:
• Do not connect this unit and other components to
mains power until all connections between
components have been completed.
Notes:
• Insert all plugs and connectors securely.
Incomplete connections may make noise.
• Be sure to connect the left and right channels
properly.
Red connectors are for the R(right) channel, and
white connectors are for the L(left) channel.
• Be sure to connect input and output properly.
• Refer to the instructions for each component that
is connected with this unit.
• Do not bind audio/video connection cables with
power cords and speaker cables will result in
generating hum or other noise.
OUT IN
L R
L R
L R
R L
L R L R
10 mm
3.
4.
5.
L R
R L
TV
DVD
IN
IN
DSS / VCR2
VCR1
OUT
IN
IN
MONITOR
OUT
OUT
DVD IN
VCR1 IN
DVD
VCR1 OUT
MONITOR
OUT
S-VIDEO
VIDEO
TV
DSS / VCR2
VCR1
CDR / MD
TAPE
CD
CENTER
SUB
WOOFER
CENTER
CE
L
R
IN
CONNECTING A SUBWOOFER
Use the PRE OUT SUBWOOFER jack to connect
a powered subwoofer (power amplifier built in ).
If your subwoofer is passive type (power amplifier
is not built in), connect a monaural power amplifier
to the PRE OUT SUBWOOFER jack and connect
the subwoofer to the amplifier.
SR4400N DFU_01_ENG 1_2
Page 11
IN
IN
OUT
IN
OUT
IN
OUT
IN
AUDIO
OUT
IN
FRONT
SURROUND
SURR.
BACK
SUB
WOOFER
SU
SURR.
BACK
6.1CH INPUT
FM
(75
75Ω
Ω)
ANTENNA
IN
OUT
DIG-1 IN
DIG-2 IN
DIG.OUT
COAX
DIGITAL
DIG-3 IN
• There are four digital inputs, two coaxial jacks
and two optical jacks, on the rear panel. You can
use these jacks to input PCM, Dolby Digital and
DTS bitstream signals from a CD, DVD, or other
digital source components.
• There are one digital output with coaxial jack
and one with optical jack on the rear panel.
These jacks can be connected to CD recorder,
MD deck.
• Setup the digital audio format of DVD player, or
other digital source component. Refer to the
instructions for each component to be
connected to digital input jacks.
• Use fiber optical cables(optical) for DIG-1,2
input jacks. Use 75 ohms coaxial cables(for
digital audio or video) for DIG-3,4 input jacks.
• You can designate the input for each digital
input/output jacks according to your component.
See page 16.
R
GND
DIG.OUT
OPT
CONNECTING DIGITAL AUDIO COMPONENTS
L
AM
SURROUND
BACK
DIG-4 IN
REMOTE
CONTROL
CENTER
R
SURROUND
L
R
FRONT
SPEAKER SYSTEMS
L R
L
SWITCHED 100W MAX
AC OUTLET
L R
SURROUND
FRONT
PRE OUT
Notes:
• There is no Dolby Digital RF input jack. Please
use an external RF demodulator Dolby Digital
decoder when connecting the Dolby Digital RF
output jack of the video disc player to the digital
input jack.
• The digital signal jacks on this unit conform to the
EIA standard. If you use a cable that does not
conform to this standard, this unit may not
function properly.
• Each type of audio jack works independently.
Signals input through the digital and analog jacks
are output through the corresponding digital and
analog jacks, respectively.
ANALOG AUDIO
L R
Cautions:
• Be sure to use speakers with the specified
impedance shown on the rear panel of this unit.
• To prevent damage
to circuitry, do not
let the bare speaker
wires touch each
other and do not let
them touch any
metal part of this
unit.
• Do not touch the speaker terminals when the
power is on. It may cause electric shocks.
• Do not connect more than one speaker cable to
one speaker terminal. Doing so may damage this
unit.
Note:
• Be sure to connect the positive and negative
cables for the speaker properly. If they are missconnected, the signal phase will reversed and the
signal quality will be corrupted.
ENGLISH
CONNECTING SPEAKER WIRE
DIGITAL AUDIO
(COAXIAL)
DIGITAL AUDIO
(OPTICAL)
03.4.4, 9:06 AM
Adobe PageMaker 6.5J/PPC
11
ENGLISH
VIDEO, S-VIDEO JACKS
CONNECTING VIDEO COMPONENTS
There are two types of video jacks on the rear
panel.
MONITOR
DVD PLAYER
SATELLITE TUNER
DIGITAL AUDIO VIDEO S-VIDEO
OUT
OUT
OUT
OUT
VIDEO S-VIDEO
IN
IN
DIGITAL AUDIO VIDEO
OUT
OUT
OUT
CVBS
L R
L R
L
R
L
R
R L
R L
TV
IN
DVD
IN
VCR1
IN
DSS / VCR2
OUT
IN
OUT
OUT
DVD IN
VCR1 IN
DVD
DVD
IN
IN
DSS / VCR2
VCR1
VCR1 OUT
OUT
IN
IN
MONITOR
OUT
OUT
DVD IN
VCR1 IN
TV
DVD
VCR1 OUT
MO
MONITOR
OUT
S-VIDEO
VIDEO
MONITOR
OUT
DSS / VCR2
VCR1
CDR / MD
TAPE
CD
CENTER
SUB
WOOFER
S-VIDEO
VIDEO
TV
TV
MONITOR
DSS / VCR2
VCR1
CDR / MD
TAPE
CD
CENTER
SUB
WOOFER
CENTER
CENT
L
AM
R
R
AM
R
R
GND
IN
IN
IN
IN
OUT
OUT
IN
OUT
IN
OUT
IN
FRONT
SURROUND
GND
IN
IN
IN
OUT
IN
OUT
IN
OUT
IN
AUDIO
OUT
IN
FRONT
SURR.
BACK
SURROUND
SUB
WOOFER
SUR
SURR.
BACK
BAC
6.1CH INPUT
SURROUND
PRE OUT
AUDIO
FRONT
SURR.
BACK
SUB
WOOFER
6.1CH INPUT
FM
(75
Ω)
75Ω
FM
(75
Ω)
75Ω
ANTENNA
ANTENNA
IN
IN
OUT
OUT
DIG.OUT
OPT
DIG-1 IN
DIG-2 IN
DIG.OUT
COAX
DIGITAL
DIG-3 IN
DIG.OUT
OPT
SURROUND
BACK
DIG-4 IN
CENTER
REMOTE
CONTROL
R
SURROUND
L
R
FRONT
L
SWITCHED 100W MAX
SPEAKER SYSTEMS
DIG-1 IN
DIG-2 IN
DIG.OUT
COAX
DIGITAL
DIG-3 IN
SURROUND
BACK
DIG-4 IN
CENTER
R
REMOTE
CONTROL
SURROUND
L
R
FRONT
SURR.
BACK
SWITCHED 100W MAX
SWITCH
L
SPEAKER SYSTEMS
AC OUTLET
AC OUTLET
L R
L R
CENTER
L
L
L
VIDEO jack
The video signal for the VIDEO jacks is the
conventional composite video signal.
S-VIDEO jack
The video signal is separated into luminance(Y)
and color(C) signals for the S-VIDEO jack. The SVIDEO signals enables high-quality color
reproduction. If your video component has an SVIDEO output, we recommend to use it. Connect
the S-VIDEO output jack on your video
component to the S-VIDEO input jack on this unit.
Notes:
• Be sure to connect the left and right audio
channels properly.
Red connectors are for the R(right) channel, and
white connectors are the for L(left) channel.
• Be sure to connect input and output of video
signal properly.
• Each type of video jack works independently.
Signals input to the VIDEO(composite) and SVIDEO jacks are output to the corresponding
VIDEO(composite) and S-VIDEO jacks,
respectively.
• You may need to setup the digital audio output
format of your DVD player, or other digital source
component. Refer to the instructions of the each
component connected to the digital input jacks.
• There is no Dolby Digital RF input jack. Please
use an external RF demodulator with Dolby
Digital decoder to connect a video disc player
with the Dolby Digital RF output jack to the
digital input jack on this unit.
VIDEO
R L
S-VIDEO
L R
AUDIO
OUT
AUDIO
IN
L R
L R
L R
ANALOG AUDIO
L R
L R
VIDEO
OUT IN
S-VIDEO
OUT IN
AUDIO
OUT
VIDEO
OUT
DIGITAL AUDIO
(COAXIAL)
L R
VCR
DIGITAL AUDIO
(OPTICAL)
TV
12
SR4400N DFU_01_ENG 1_2
Page 12
03.4.4, 9:06 AM
Adobe PageMaker 6.5J/PPC
SURROUND
PRE OUT
FRONT
CONNECTING REMOTE CONTROL JACKS
TV
IN
DVD
IN
DSS / VCR2
VCR1
OUT
IN
IN
REMOTE
CONTROL
MONITOR
OUT
OUT
DVD IN
VCR1 IN
DVD
VCR1 OUT
IN
MONITOR
OUT
S-VIDEO
VIDEO
TV
CD RECORDER
ENGLISH
ADVANCED CONNECTING
DSS / VCR2
VCR1
CDR / MD
TAPE
SUB
OUT
CD
CENTER
WOOFER
CENTER
L
L
AM
EXTERNAL INTERNAL
R
R
R L R L
GND
R L
DVD AUDIO PLAYER
or
SACD MULTI CHANNEL PLAYER
TV
DVD
IN
IN
DSS / VCR2
VCR1
OUT
IN
IN
OUT
DVD
IN
OUT
IN
OUT
IN
OUT
IN
AUDIO
DVD IN
VCR1 IN
VCR1 OUT
OUT
SURROUND
SURR.
SUB
SURR.
BACK
WOOFER
BACK
6.1CH INPUT
SURROUND
FRONT
PRE OUT
IN
CDR / MD
TAPE
CD
CENTER
SUB
WOOFER
L
CENTER
OUT
L
DIG.OUT
R
FRONT SURR.
R
R
GND
OUT
IN
FRONT
S-VIDEO
DSS / VCR2
VCR1
AM
IN
IN
MODEL NO. SR4300
CENTER
MONITOR
L
IN
OUT
ANTENNA
MONITOR
OUT
IN
FM
(75
75½
½)
VIDEO
TV
IN
R L
IN
OUT
IN
OUT
IN
OUT
IN
FRONT
AUDIO
SURROUND
SURR.
SUB
SURR.
BACK
WOOFER
BACK
6.1CH INPUT
SURROUND
FRONT
OPT
DIG-1 IN
DIG-2 IN
DIG.OUT
COAX
DIGITAL
SURR.
BACK
SUB
WOOFER
DIG-3 IN
SURROUND
DIG-4 IN
BACK
REMOTE
CONTROL
CENTER
R
SURROUND
L
R
FRONT
SPEAKER SYSTEMS
L
REMOTE
CONTROL
SWITCHED
100W MAX
MD DECK
AC OUTLET
IN
OUT
PRE OUT
FM
(75½)
POWER
AMPLIFER
CENTER
ANTENNA
EXTERNAL INTERNAL
MODEL NO. SR4400
L
IN
R
FRONT SURR.
OUT
DIG.OUT
OPT
DIG-1 IN
DIG-2 IN
DIG.OUT
COAX
DIGITAL
DIG-3 IN
SURROUND
DIG-4 IN
BACK
CENTER
REMOTE
R L
SURR.
BACK
R
SUB
WOOFER
SURROUND
L
R
FRONT
SWITCHED
L
SPEAKER SYSTEMS
CONTROL
100W MAX
AC OUTLET
Subwoofer
R L
L R
L R
Front
Left
Front
Right
Center
Surround
Left
Surround
Right
Surround
Back
CONNECTING MULTI CHANNEL AUDIO SOURCE
CONNECTING EXTERNAL POWER AMPLIFIER
The 6.1CH INPUT jacks are for multi channel
audio source such as SACD multi channel player,
DVD audio player or external decoder.
If you use these jacks, switch on 6.1CH INPUT
and setup 6.1CH INPUT level by using SETUP
MAIN MENU. See page 20.
The PREOUT jacks are for connecting external
power amplifiers , you can have better sound
quality.
Be sure to connect each speaker to the corresponding external power amplifier.
You can control other Marantz products through
this unit with the remote controller by connecting
REMOTE CONTROL terminals on each unit.
The signal transmitted from the remote controller
is received by the remote sensor on this unit then
the signal is sent to the connected device through
this terminal. Therefore you need to aim the
remote signal only to the unit. Also, if a Marantz
power amplifier (some models excluded) is
connected with this terminal, the power amplifier’s
standby function is synchronized by pressing the
POWER button on the remote.
REMOTE
CONTROL
CD PLAYER
IN
OUT
EXTERNAL INTERNAL
Set the REMOTE CONTROL SWITCH on the
units other than this unit to EXT.(EXTERNAL) for
this feature.
13
SR4400N DFU_01_ENG 1_2
Page 13
03.4.4, 9:06 AM
Adobe PageMaker 6.5J/PPC
ENGLISH
ASSEMBLING THE AM LOOP ANTENNA
CONNECTING THE ANTENNA TERMINALS
1.
2.
3.
FM
ANTENNA
FM EXTERNAL
ANTENNA
AM EXTERNAL
ANTENNA
AM LOOP
ANTENNA
4.
Release the vinyl tie and take out the
connection line.
Bend in the reverse direction.
Inserting into the hole to attach the loop
antenna to the antenna stand.
With the antenna on top any stable surface.
1.
CONNECTING AN FM OUTDOOR ANTENNA
Notes:
• Keep the antenna away from noise sources (neon
signs, busy roads, etc.).
• Do not put the antenna close to power lines. Keep
it well away from power lines, transformers, etc.
• To avoid the risk of lightning and electrical shock,
grounding is necessary.
2.
CONNECTING AN AM OUTDOOR ANTENNA
An outdoor antenna will be more effective if it is
stretched
horizontally above a window or outside.
3.
TV
DVD
IN
IN
DSS / VCR2
VCR1
OUT
IN
IN
DVD
OUT
DVD IN
VCR1 IN
VCR1 OUT
CONNECTING THE SUPPLIED ANTENNAS
MONITOR
OUT
S-VIDEO
DSS / VCR2
VCR1
CDR / MD
TAPE
CD
CENTER
SUB
WOOFER
CENTER
L
L
R
R
AM
GND
IN
IN
IN
OUT
IN
OUT
IN
OUT
IN
AUDIO
OUT
IN
FRONT
SURROUND
SURR.
BACK
SUB
WOOFER
SURR.
BACK
6.1CH INPUT
FM
(75
75Ω
Ω)
ANTENNA
SURROUND
PRE OUT
FRONT
Connecting the supplied FM antenna
The supplied FM antenna is for indoor use only.
During use, extend the antenna and move it in
various directions until the clearest signal is
received.
Fix it with push pin or similar implements in the
position that will cause the least amount of
distortion.
If you experience poor reception quality, an
outdoor antenna
may improve the quality.
MODEL NO. SR4300
IN
OUT
DIG.OUT
OPT
Notes:
• Do not remove the AM loop antenna.
• To avoid the risk of lightning and electrical shock,
grounding is necessary.
MONITOR
OUT
VIDEO
TV
4.
DIG-1 IN
DIG-2 IN
DIG.OUT
COAX
DIGITAL
DIG-3 IN
SURROUND
BACK
DIG-4 IN
REMOTE
CONTROL
CENTER
R
SURROUND
L
SPEAKER SYSTEMS
R
FRONT
L
SWITCHED 100W MAX
AC OUTLET
Connecting the supplied AM loop antenna
The supplied AM loop antenna is for indoor use
only.
Set it in the direction and position where you
receive the clearest sound. Put it as far away as
possible from the unit, televisions, speaker
cables, and power cords.
If you experience poor reception quality, an
outdoor antenna may improve the quality.
1.
2.
3.
Press and hold down the lever of the AM
antenna terminal.
Insert the bared wire into the antenna
terminal.
Release the lever.
14
SR4400N DFU_01_ENG 1_2
Page 14
03.4.4, 9:06 AM
Adobe PageMaker 6.5J/PPC
Main Menu
After all components are connected, initial setup
must be performed.
SPEAKERS
ROOM
6.1 (6.1ch)
2.0 (2.0 ch)
LARGE / MEDIUM / SMALL
6.1 (6.1ch)
LARGE
1. INPUT setup
CD
TAPE
CD-R (CD-R/MD)
TV
DSS (DSS/VCR2)
DVD
VCR1
D1 AUTO / D2 AUTO
/D3AUTO / D4 AUTO
(DigitalAUTO mode)
DIG.1 / DIG.2 / DIG3. / DIG4
(Digital Fixed mode)
ANALOG
D-4 AUTO
ANALOG
D-1AUTO
ANALOG
DIG-2 AUTO
DIG-3 AUTO
ANALOG
SETUP MENU SYSTEM
The SR4400 incorporates an menu on the front
display, which makes various operations possible
by using the cursor ( , , , ) and OK buttons on
the remote control.
2. SPEAKER setup
TV
VCR1
DSS/VCR2
DVD
TUNER
CD
TAPE
CDR/MD
AUX
AMP
SLEEP
MUTE
OSD
4.
5.
T.MODE(Test Tone Mode)
L (Front Left)
C (Center)
R (Front Right)
SR (Surround Right)
SB (Surround Back)
SL (Surround Left)
SW (Subwoofer)
EXIT
MENU OFF
DTS
2
0.3m
0.3m
0.3m
0.3m
0.3m
(1f)
(1f)
(1f)
(1f)
(1f)
9.0m
9.0m
9.0m
9.0m
9.0m
(30f)
(30f)
(30f)
(30f)
(30f)
3.0m
3.0m
3.0m
3.0m
3.0m
(10f)
(10f)
(10f)
(10f)
(10f)
Speaker Level Setup
MANU (Manual) / AUTO
-10dB
+10dB
-10dB
+10dB
+10dB
-10dB
+10dB
-10dB
+10dB
-10dB
-10dB
+10dB
+10dB
-15dB
MANU
0dB
0dB
0dB
0dB
0dB
0dB
0dB
BOTH / MIX
0dB / -10dB / OFF
BOTH
0dB
3
Turn on this unit.
Press the AMP button of the remote control to
set the amp mode.
Press the MENU button or the OK button to
enter the SETUP MENU.
SIMPLE SETUP is displayed and you can
enter the SIMPLE SETUP menu by pressing
the MENU button or the OK button.
Press the or cursor button to select the
MAIN MENU item.
Press the OK button or the MENU button to
enter the desired menu item.
3. PREFERENCE setup
4. PRO LOGIC II setup
5. CS II setup
6. 6.1CH IN setup
After finishing all setup, press the MENU OFF
button to exit the SETUP MENU.
7. SURROUND setup
SR4400N DFU_01_ENG 2_2
YES
LARGE
SMALL
SMALL
YES
2.
3. 5.
AUTO
1
L&R (Front Left&Right)
C (Center)
SLR (Surround Left&Right)
SW(Subwoofer)
SB (Surround Back)
3. 5.
OK
SETUP/
T.TONE
3.
MAIN
VOL.
MENU
4.
1.
2.
YES / NONE
SMALL / LARGE
SMALL / LARGE / NONE
SMALL / LARGE / NONE
YES / NONE
Speaker Distance Setup
POWER
S-DIRECT
Speaker Size Setup
SUBW (Subwoofer)
L&R (Front Left&Right)
CENTER
SL&SR (Surround Left&Right)
SURR.B (Surround Back)
ENTER THE DESIRED MENU ITEM
OF THE SETUP MENU
TV
VOL.
Initial state
SIMPLE SETUP
ENGLISH
MENU STRUCTURE
SETUP
Page 15
BASSMIX
LFE
PANORAMA
DIMENSION
C.WIDTH (Center width)
TRUBASS
SRS DIALOG
OFF / ON
0
6
7
0
0
0
OFF
3
3
6
6
0
0
L (Front Left)
C (Center)
R (Front Right)
SR (Surround Right)
SB (Surround Back)
SL (Surround Left)
SW (Subwoofer)
-10dB
-10dB
-10dB
-10dB
-10dB
-10dB
-15dB
+10dB
+10dB
+10dB
+10dB
+10dB
+10dB
+10dB
0dB
0dB
0dB
0dB
0dB
0dB
0dB
Surround Mode
C (Center) LEV
SL (Surround Left) LEV
SR (Surround Right) LEV
SB (Surround Back) LEV
SW (Subwoofer) LEV
-10dB
-10dB
-10dB
-10dB
-10dB
-15dB
+10dB
+10dB
+10dB
+10dB
+10dB
+10dB
0dB
0dB
0dB
0dB
0dB
0dB
03.4.4, 9:24 AM
Adobe PageMaker 6.5J/PPC
15
ENGLISH
SIMPLE SETUP
The relation of the speakers number and
conectted speaker
MENU STRUCTURE of Simple Setup
You can setup the speaker conditions quickly with
SIMPLE SETUP menu. In this menu, the number
of speakers and speaker delay time can be set.
These settings can be changed more detail in “2.
SPEAKER SETUP” menu.
SIMPLE SETUP
SPEAKERS
6.1 (ch)
6.0 (ch)
5.1 (ch)
POWER
5.0 (ch)
TV
VCR1
DSS/VCR2
DVD
TUNER
CD
TAPE
CDR/MD
4.1 (ch)
4.0 (ch)
4. 5.
TV
VOL.
AUX
AMP
SLEEP
MUTE
OSD
4.
5.
Front
L/R
(F)
Front Surround Surround
Center
L/R
Back
(C)
(S)
(SB)
Sub
woofer
(SW)
6.1 ch
LARGE
SMALL
SMALL
YES
YES
6.0 ch
LARGE
SMALL
SMALL
YES
NONE
5.1 ch
LARGE
SMALL
SMALL
NONE
YES
5.0 ch
LARGE
SMALL
SMALL
NONE
NONE
4.1 ch
LARGE
NONE
SMALL
NONE
YES
4.0 ch
LARGE
NONE
SMALL
NONE
NONE
3.1 ch
LARGE
SMALL
NONE
NONE
YES
3.0 ch
LARGE
SMALL
NONE
NONE
NONE
2.1 ch
LARGE
NONE
NONE
NONE
YES
2.0 ch
LARGE
NONE
NONE
NONE
NONE
3.0 (ch)
2.1 (ch)
OK
SETUP/
T.TONE
2.
3.
3.1 (ch)
MENU
1. 3. 5.
1.
MAIN
VOL.
CHANNEL
MENU OFF
S-DIRECT
AUTO
1
2
3
NIGHT
CSII
EX/ES
DSP
4
5
6
DTS
2. 5.
2.0 (ch)
ROOM
The relation of the room size and floor space
SIZE
Note
• All Simple Setup menu is reset when the speaker
setting is changed with Speaker Setup menu.
Width
(W)
Depth
(D)
10 m2
2.7 m
3.6 m
MEDIUM
Four digital inputs can be assigned as the desired
source.
Use this menu to select the digital input jack to be
assigned to the input source.
The Input Setup consists of 9 items, which are as
below.
• D1AUTO to D4AUTO : Digital AUTO mode
If the input signal from the selected source is digital
signal, this unit chooses a digital input
automatically.
• DIG.1 to DIG.4 : Digital FIXED mode
The SR4400 chooses a digital input regardless of
a input signal from the selected source.
• ANA : Analog mode
Use this menu to select the digital input jack to be
assigned to the input source.
Imaging Distance
Front (F)
6 ft. (1.8 m)
Center (C)
5 ft. (1.5 m)
Surround (S)
4 ft. (1.2 m)
Surr. Back (SB)
5 ft. (1.5 m)
LARGE
SMALL
Select “SIMPLE SETUP” in SETUP MAIN
MENU with the or cursor button.
Press the OK button to enter the menu.
Press the or cursor button to select a
desired item.
Press
or
cursor button to select the
speaker number or room size.
When you select “TO MAIN MENU” by
pressing the or cursor button, you can
return the SETUP MAIN MENU by pressing
the OK button.
Or press the or cursor button to select
“EXIT”, then press the OK button to exit the
SETUP MENU.
Floor
space
1. INPUT SETUP (ASSIGNABLE DIGITAL
INPUT)
4. 5.
Front (F)
MEDIUM
16 m2
3.6 m
4.5 m
D
SL
(F)
(SW)
LARGE
SB
(SB)
(C)
C
TV
W
24 m2
4.5 m
5.4 m
SR
(F)
Page 16
OK
SETUP/
T.TONE
MENU OFF
1
2
3
CSII
EX/ES
DSP
4
5
6
6 ft. (1.8 m)
5 ft. (1.5 m)
Surr. Back (SB)
7 ft. (2.1 m)
1.
2.
3.
9 ft. (2.7 m)
Center (C)
8 ft. (2.4 m)
Surround (S)
7 ft. (2.1 m)
Surr. Back (SB)
8 ft. (2.4 m)
4.
5.
The relation of the room size and floor space is a
roughly standard.
FR
03.4.4, 9:24 AM
MENU
NIGHT
Sub Woofer (SW) 8 ft. (2.4 m)
(S)
MAIN
VOL.
AUTO
Center (C)
SW
MUTE
S-DIRECT
Surround (S)
Front (F)
(S)
SLEEP
7 ft. (2.1 m)
Sub Woofer (SW) 6 ft. (1.8 m)
FL
AMP
1. 3. 5.
Sub Woofer (SW) 5 ft. (1.5 m)
SMALL
AUX
OSD
16
SR4400N DFU_01_ENG 2_2
TV
VOL.
Adobe PageMaker 6.5J/PPC
DTS
2. 5.
Select “1.INPUT” in SETUP MAIN MENU with
the or cursor button.
Press the OK button to enter the menu.
Press the or cursor button to select the
input source.
Press or cursor button to select the input
function.
Select “DxAUTO”, “DIG.x” or “ANA” for input
sources.
If you finish these setup, press the or
cursor button to select “TO MAIN MENU” then
press the OK button to return the SETUP
MAIN MENU.
Or press the or cursor button to select
“EXIT” then press the OK button to exit the
SETUP MENU.
1.
2.
3.
4.
5.
Select “2.SPEAKER” in SETUP MAIN MENU
with or cursor button,
Press the OK button to enter the menu. The
first sub-menu item is “Speaker Size” setup.
Press or cursor button to select the each
speaker.
Press or cursor button to select the setting
of size to each speaker.
If you finish these setup, press the or
cursor button to select “NEXT”.
Size
Speaker Size
setup
L&R
4. 6.
TV
VOL.
CENTER
AMP
MUTE
SL & SR
NONE
Select when a subwoofer is not connected.
SMALL
Select if the front speakers are small sized.
MAIN
VOL.
OK
SETUP/
T.TONE
S-DIRECT
Select if the front speakers are large sized.
1.
SMALL
Select if the center speaker is small sized.
2.
LARGE
Select if the center speaker is large sized.
NONE
Select if no center speaker is connected.
SMALL
Select if the surround left and right speakers are small sized.
LARGE
Select if the surround left and right speakers are large sized.
NONE
Select if no surround left and right speakers are connected.
YES
Select when a surround back speaker is connected.
Select when a surround back speaker is not connected.
MENU
2. 4.
LARGE
MAIN
VOL.
NEXT
OK
SETUP/
T.TONE
NIGHT
AMP
MUTE
3.
5.
MENU OFF
DTS
AUTO
1
2
3
CSII
EX/ES
DSP
4
5
6
5.
Enter to the “Speaker Distance setup” from
the previous “Speaker Size setup”.
Press or cursor button to select the each
speaker.
Press or cursor button to set the distance
from your listening position for each speaker.
After finishing the Speaker Distance setup,
press the
or
cursor button to select
“NEXT”.
Press the OK button to enter the next
“Speaker Level” setup.
Or press the or cursor button to select
“EXIT” then press the OK button to exit the
SETUP MENU.
Or press the or cursor button to select “TO
MAIN MENU” then press the OK button to
return the SETUP MAIN MENU.
Or press the or cursor button to select
“RETURN” then press the OK button to return
the previous “Speaker Distance” setup.
MENU
1. 3. 5.
S-DIRECT
AUX
SLEEP
OSD
NONE
OSD
TV
VOL.
Select when a subwoofer is connected.
4.
SURR.B
AUX
SLEEP
Use this parameter to specify the distance of each
speaker’s position from the listening position. The
delay time is automatically calculated according to
these distances.
Begin by determining the ideal or most commonly
used seating position in the room.
This is important for the timing of the acoustics to
create the proper sound space that the SR4400
and today’s sound systems are able to produce.
Note that the speakers that you selected “None”
for in the Speaker Config sub-menu will not appear
here.
NIGHT
SPEAKER SIZE
When setting the speaker size in the SPEAKER
SIZE sub-menu, use the guidelines given below.
Large:
The complete frequency range for the channel
you are setting will be output from the speaker.
Small:
Frequencies of the channel you are setting
lower than approx. 100Hz will be output from the
subwoofer.
If the Subwoofer is set to “NONE” and the front
speakers are set to “Large,” then the sound may
be output from both the left and right speakers.
SPEAKER DISTANCE
3. 5.
YES
SUBW
2.SPEAKER
After you have installed the SR4400, connected all
the components, and determined the speaker
layout, it is now time to
perform the settings in the Speaker Setup menu
for the optimum sound acoustics for your
environment and speaker layout.
Before you perform the following settings, it is
important that you first determine the following
characteristics:
Press the OK button to enter the next
“Speaker Distance” setup.
Or press the or cursor button to select
“EXIT” then press the OK button to exit the
SETUP MENU.
Or press the or cursor button to select “TO
MAIN MENU” then press the OK button to
return the SETUP MAIN MENU.
MENU STRUCTURE of Speaker Size setup
Speaker
2. SPEAKER SETUP
6.
ENGLISH
Notes:
• When a DTS-LD or DTS-CD is playing, this setup
is not available. This is to avoid noise being
generated from the analog input.
• If “Dx-AUTO” is selected and a DVD, compact
disc or LD is fast forwarded during playback,
decoded signals may produce a skipping sound. In
such cases, change the setting to DIGITAL.
• Same digital input function cannot be set. In this
case, the previous setting is set to ANALOG.
Same digital input number cannot be set in Digital
AUTO mode and Digital Fixed mode. For
example, D1AUTO and DIG.1 are not set at same
time.
MENU OFF
AUTO
DTS
1
2
3
CSII
EX/ES
DSP
4
5
6
EXIT
TO MAIN
MENU
2. 6.
Speaker Distance
setup
exit SETUP
MENU
MAIN MENU
17
SR4400N DFU_01_ENG 2_2
Page 17
03.4.8, 11:00 AM
Adobe PageMaker 6.5J/PPC
ENGLISH
L&R :
Set the distance from the front left and right
speakers to your normal listening position
between 1 and 30 feet in 1.0 foot interval (0.3 to
9 meters in 0.3-meter intervals).
C:
Set the distance from the center speaker to your
normal listening position between 1 and 30 feet
in 1.0 foot interval
(0.3 to 9 meters in 0.3-meter intervals).
SLR:
Set the distance from the surround left and right
speaker to your normal listening position
between 1 and 30 feet in 1.0 foot interval (0.3 to
9 meters in 0.3-meter intervals).
SW :
Set the distance from the subwoofer to your
normal listening position between 1 and 30 feet
in 1.0-foot intervals (0.3 to 9 meters in 0.3-meter
intervals).
SB:
Set the distance from a surround back speaker
to your normal listening position between 1 and
30 feet in 1.0-foot intervals (0.3 to 9 meters in
0.3-meter intervals).
Note
• Speakers that you selected “No” or “None” for in
the Speaker Size menu will not appear.
MENU STRUCTURE of Speaker Distance setup
Speaker
Size setup
Speaker
Distance
L&R
Maximum
C
Speaker
Distance setup
30 feet
(3.0m)
29 feet
(2.7m)
button
1 foot (0.3 m) interval
SLR
SW
Minimum
SB
2 feet
(0.6m)
1 feet
(0.3m)
button
Here you will set the volume for each speaker so
that they are all heard by the listener at the same
level.
Note:
• The speaker level settings is not available in
6.1channel input mode and S-Direct mode.
TEST MODE : Selects “MANU (manual)” or
“AUTO” for generating mode of
test tone or cursor button.
EXIT
TO MAIN MENU
Maximum
If you select “MANU”, adjust the output level of
each speaker as follow.
TV
VOL.
AUX
AMP
SLEEP
MUTE
Reference
Minimum
3.
4.
MENU
OK
MAIN
MENU
Speaker
Size setup
1. 3. 5.
1.
SETUP/
T.TONE
MENU OFF
S-DIRECT
AUTO
1
2
3
NIGHT
CSII
EX/ES
DSP
4
5
6
DTS
5.
When you select “MANUAL” in T.MODE menu
by pressing the or button, this unit will emit
a pink noise from the front left speaker. At this
time, adjust the desired level of the master
volume. Remember the level of this noise and
then press the button. This unit will emit the
pink noise from the center speaker.
18
SR4400N DFU_01_ENG 2_2
Page 18
03.4.4, 9:24 AM
0dB
button
-9dB
5.
MAIN
VOL.
button
1 dB interval
RETURN
OSD
exit SETUP
MENU
+10dB
1 dB interval
1. 5.
Speaker
Level setup
Using the and cursor buttons, adjust the
volume level of the noise from the center
speaker so that it is the same level as the front
left speaker (Note that this can be adjusted to
any level between –10 and +10 dB in 1dB
intervals).
+9dB
If you select “AUTO” by pressing the button, the
test tone will be cycled through in a circular pattern
which is L (Left) → C (Center) → R (Right) → SR
(Surround Right) → SB (Surround Back) → SL
(Surround Left) → SW (Subwoofer → L →..
increments of 2 seconds for each channel.
Using the
and
cursor buttons, adjust the
volume level of the noise from the speaker so that
it is the same level for all speaker.
When you select “TO MAIN MENU” by pressing
the OK button, you can return the SETUP MAIN
MENU by pressing the OK button . Or press the
or cursor button to select “EXIT” then press the
OK button to exit the SETUP MENU.
Or press the
or
cursor button to select
“RETURN” then press the OK button to return the
previous “SPEAKER DISTANCE” setup.
2. 5.
NEXT
2.
SPEAKERS LEVEL
Adobe PageMaker 6.5J/PPC
-10dB
(SW -15 dB)
Press the cursor button again. This unit will
now emit the pink noise from the front right
speaker.
Repeat steps 2 and 3 above for the front right
and other speakers until all speakers are
adjusted to the same volume level.
When you select “TO MAIN MENU” by
pressing the OK button, you can return the
SETUP MAIN MENU by pressing the OK
button . Or press the or cursor button to
select “EXIT” then press the OK button to exit
the SETUP MENU.
Or press the
or
button to select
“RETURN” then press the OK button to return
the previous “SPEAKER DISTANCE” setup.
Note:
• When Front speaker is set ”SMALL”, then BASS
MIX is set “MIX”. (The display appears “BASS
MIX = ✱✱✱”.)
MENU STRUCTURE of Speaker Level setup
Direct selec
by remote
control
Speaker
Distance
setup
Test Tone mode
MANU
LFE
• Select the output level of the LFE signal
included in the Dolby Digital signal or the DTS
signal.
Select 0dB, -10 dB or OFF with Left or Right
cursor button.
• This setting is available during a digital signal is
playback.
AUTO
(Auto)
Speaker
SW
Speaker
Level setup
L
C
R
SR
SB
MENU STRUCTURE of PREFERENCE setup
3.PREFERENCE
BOTH
BASSMIX
MIX
TO MAIN MENU
RETURN
EXIT
0 dB
LFE
MAIN
MENU
3. PREFERENCE
4. 5.
TV
VOL.
AUX
AMP
MUTE
2.
3.
MAIN
VOL.
MENU
OK
SETUP/
T.TONE
1.
4.
5.
SLEEP
1. 3. 5.
NIGHT
exit SETUP
MENU
-10 dB
OFF
OSD
S-DIRECT
Speaker
Distance setup
MENU OFF
AUTO
DTS
1
2
3
CSII
EX/ES
DSP
4
5
6
2. 5.
Select “3. PREFERENCE” in SETUP MAIN
MENU with or cursor button.
Press the OK button.
Press or cursor button to select a desired
item.
In this mode, the SR4400 includes three controls
to fine-tune the sound-field as follow.
4. 5.
Press or cursor button to adjust.
When you select “TO MAIN MENU” by
pressing the or button, you can return the
SETUP MAIN MENU by pressing the OK
button .
Or press the or cursor button to select
“EXIT” then press the OK button to exit the
SETUP MENU.
TO MAIN MENU
EXIT
exit SETUP
MENU
BASS MIX
• The bass mix setting is only valid when “LARGE”
is set for the front speakers and “YES” is set for
the subwoofer at stereo playback .
• When the “BOTH” is selected, the low frequency
signal range of “LARGE” are produced
simultaneously from those channels and the
subwoofer channel.
When actual low frequency sound volume is
weak depending on room size, use this function
to fill low frequency sound equally in the room.
TV
VOL.
AUX
AMP
SLEEP
MUTE
OSD
OK
SETUP/
T.TONE
S-DIRECT
NIGHT
1.
2.
3.
5.
MAIN
VOL.
MENU
1. 3. 5.
4.
Listening
Positiom
SL
4. PL II (DOLBY PRO LOGIC II )
ENGLISH
• When “Mix” is selected, subwoofer output is
determined depending on the speaker sizes for
each channels. If the front speaker size is set to
“Large”, subwoofer output is only the LFE signal
contained in Dolby Digital or DTS processed
signals.
Notes:
• Speakers that you selected “None” for in the
Speaker Size Setup menu will not appear.
• The setup level for each channel is memorized for
reproduction in all surround mode.
• To adjust the speaker levels for 6.1-channel input
sources, you will need to use the 6.1CH Level
Input setup menu.
MENU OFF
AUTO
DTS
1
2
3
CSII
EX/ES
DSP
4
5
6
2. 5.
Select “4.PRO LOGIC II” in SETUP MAIN
MENU with or cursor button.
Press the OK button to enter the menu.
Press or cursor button to select a desired
item.
Press or cursor button to select the mode
or set the level.
When you select “TO MAIN MENU” by
pressing the or button, you can return the
SETUP MAIN MENU by pressing the OK
button .
Or press the or cursor button to select
“EXIT” then press the OK button to exit the
SETUP MENU.
PANORAMA:
Select the Panorama mode On or Off with or
cursor button.
Panorama wraps the sound of the front left and
right speakers around you for an exciting
perspective.
DIMENSION:
Set the Dimension level between 0 and 6 level in
1 level interval with or cursor button.
Adjust the soundfield either towards the front or
towards the rear.
This can be useful to help achieve a more
suitable balance from all the speakers with
certain recordings.
C WIDTH:
Set the Center width level between 0 and 7 level
in 1 level interval with or cursor button.
Center Width allows you to gradually spread the
center channel sound into the front left and right
speakers.
At its widest setting, all the sound from the
center is mixed into the left and right.
This control may help achieve a more spacious
sound or a better blend of the front image.
If “NONE” was selected for the Center speaker
setting in the Speaker size, then this setting will
not appear.
19
SR4400N DFU_01_ENG 2_2
Page 19
03.4.8, 11:00 AM
Adobe PageMaker 6.5J/PPC
ENGLISH
Note:
• When Center speaker is set ”None”, then
C.WIDTH is set “7”. (The display appears
“C.WIDTH = ✱✱✱”.)
MENU STRUCTURE of PRO LOGIC II setup
4. PRO LOGIC II
setup
OFF
PANORAMA
ON
0
DIMENSION
C.WIDTH
0
6
7
TRUBASS:
Set the TRUBASS level between 0 and 6 level in
1 level interval with or cursor button.
TRUBASS produced by the speakers to be an
octave below the actual physical capabilities of
the speakers adding exciting, deeper bass
effects.
SRS DIALOG:
Set the SRS DIALOG level between 0 and 6
level in 1 level interval with or cursor button.
This can be popped out of the surround audio
effects allowing the listener to easily discern
what the actors say.
If “NONE” was selected for the Center speaker
setting in the Speaker size, then this setting will
not appear.
1.
2.
3.
4.
Select “6. 6.1 CH IN” in SETUP MAIN MENU
with or cursor button.
Press the OK button to enter this menu.
Press or cursor button to select desired
channel.
Using the
or
cursor button, adjust the
volume level of each channel.
Maximum
Surround setting group
1: AUTO, DOLBY, DTS, EX/ES, VIRTUAL,
STEREO
2: Multi-ch stereo
3: CS II
+10dB
+9dB
button
1 dB interval
Reference
MENU STRUCTURE of CS II setup
7. SURROUND
This sub menu is to adjust channel levels for each
surround setting groups. There are three surround
setting groups shown below. Therefore if settings
for a surround mode are changed, settings for all
other surround modes in the same group are also
changed.
0dB
4. 5.
1 dB interval
TV
VOL.
button
AUX
AMP
SLEEP
MUTE
OSD
MAIN
VOL.
MENU
-9dB
TO MAIN MENU
EXIT
5.CS II setup
0
TRUBASS
1. 3. 5.
6
Minimum
SETUP/
T.TONE
exit SETUP
MENU
5.
0
SRS DIALOG
TO MAIN MENU
5. CS II (CIRCLE SURROUND II)
4. 5.
TV
VOL.
AUX
AMP
SLEEP
MUTE
OSD
NIGHT
4.
5.
exit SETUP
MENU
MAIN
VOL.
When you select “TO MAIN MENU” by
pressing the or button, you can return the
SETUP MAIN MENU by pressing the OK
button .
Or press the or cursor button to select
“EXIT” then press the OK button to exit the
SETUP MENU.
Note:
• The condition of these setup will be memorized to
6.1CH INPUT source.
NIGHT
1.
2.
3.
4.
5.
MENU OFF
AUTO
DTS
1
2
3
CSII
EX/ES
DSP
4
5
6
2. 5.
Select “5. CS II” in SETUP MAIN MENU with
or cursor button.
Press the OK button to enter this menu.
Press or cursor button to select desired
item.
Press or cursor button to set the level.
When you select “TO MAIN MENU” by
pressing the or button, you can return the
SETUP MAIN MENU by pressing the OK
button .
Or press the or cursor button to select
“EXIT” then press the OK button to exit the
SETUP MENU.
channel
This sub-menu is to adjust the speaker levels for
6.1-channel input sources.
Here you will adjust the volume for each channel
so that they are all heard by the listener at the
same level.
4. 5.
TV
VOL.
6. 6.1CH IN
setup
L (Front Left)
C (Center)
AMP
SLEEP
MUTE
MAIN
VOL.
SR(Surround Right)
OSD
MENU
SB(Surround back)
1. 3. 5.
OK
SETUP/
T.TONE
MENU OFF
S-DIRECT
AUTO
1
2
3
NIGHT
CSII
EX/ES
DSP
4
5
6
DTS
2. 5.
SL(Surround Left)
SW(Subwoofer)
20
Page 20
03.4.4, 9:25 AM
MENU OFF
DTS
AUTO
1
2
3
CSII
EX/ES
DSP
4
5
6
2. 5.
Select “7. SURROUND” in SETUP MAIN
MENU with or cursor button.
Press the OK button.
To select a desired item, press or cursor
button.
Using the or cursor button to select the
mode or adjust the volume level of each
speaker.
When you select “TO MAIN MENU” by
pressing the or button, you can return the
SETUP MAIN MENU by pressing the OK
button .
Or press the or cursor button to select
“EXIT” then press the OK button to exit the
SETUP MENU.
SURR-MODE :
Select the desired surround mode with or
cursor button.
• If one of the following modes is selected, all other
modes are also set to the same. AUTO, DOLBY,
DTS, EX/ES, VIRTUAL, STEREO.
SURR. L/R :
Adjust the volume level of the surround left/right
speaker between -10 dB and +10 dB in 1 level
interval with or cursor button.
• If “None” was selected for the Surround L/R
speaker setting in the Speaker size, then this
setting will not appear.
R (Front Right)
AUX
TO MAIN MENU
SR4400N DFU_01_ENG 2_2
S-DIRECT
MENU STRUCTURE of 6.1CH IN setup
6. 6.1 CH INPUT LEVEL
S-DIRECT
2.
3.
EXIT
OK
SETUP/
T.TONE
1.
6
MENU
1. 3. 5.
OK
-10dB
EXIT
exit SETUP
MENU
Adobe PageMaker 6.5J/PPC
When you select “TO MAIN MENU” by pressing
the or button, you can return the SETUP MAIN
MENU by pressing the OK button.
Note:
• SURR.L/R, SURR. BACK, CENTER and SUB W
volume level are synchronized with SETUP
MAIN MENU Speaker Level. (Page 18)
MENU STRUCTURE of SURROUND setup
MODE / Speaker
7.SURROUND
setup
SURROUND MODE
C(Center)LEV
SL(Surround Left)LEV
SR(Surround Right)LEV
SB(Surround back)LEV
BASIC OPERATION
(PLAY BACK)
E.G. : DVD
R SR4400
DOWN
POWER
ET
F/P
TV
VCR1
DSS/VCR2
VCR1
DSS/VCR2
DVD
CD
TAPE
CDR/MD
CLEAR
MEMORY
TUNING/PRESET
F/P
UP
TV
VOL.
MUTE
AUX
AMP
SLEEP
MUTE
TAPE
CD
TUNER
MODE
TUNER
CD
TAPE
CDR/MD
OSD
A/D
6.1
CH-IN
HT-EQ
TV
DVD
S-DIRECT
VCR1
DSS/VCR2
DISPLAY
CDR/MD
MAIN
VOL.
DVD
CDR/MD
MENU
TEMPORARILY TURNING OFF THE
SOUND
MUTE
TAPE
CD
TUNER
AUX
AMP
SLEEP
MUTE
OK
TV
VOL.
OSD
MAIN
VOL.
MENU
To select DVD, simply press the DVD button on
the front panel or press DVD button on the remote.
After you have selected DVD, simply turn on the
DVD player and play the DVD.
• The input name will appear in the display on the
front-panel.
• As the input is changed, the SR4400 will
automatically switch to the digital input,
surround mode, attenuation, and night mode
status that were entered during the configuration
process for that source.
• When an audio source is selected, the last video
input used remains routed to the VCR1 & DSS/
VCR2 Outputs and Monitor Outputs. This
permits simultaneous viewing and listening to
different sources.
• When a Video source is selected, the video
signal for that input will be routed to the Monitor
Outputs jack and will be viewable on a TV
monitor connected to the SR4400.
SELECTING THE SURROUND MODE
Adjust the volume to a comfortable level using the
VOLUME control knob on the front panel or MAIN
VOL. / buttons on the remote.
To increase the volume, turn the VOLUME knob to
clockwise or press MAIN VOL.
button on the
remote, to decrease the volume, turn it to
counterclockwise or press MAIN VOL. button on
the remote.
Notes:
• The volume can be adjusted within the range of – ∞
to + 18 dB, in steps of 1 dB.
• However, when the channel level is set as
described on page 18, if the volume for any
channel is set at +1 dB or greater, the volume
cannot be adjusted up to +18 dB.
(In this case the maximum volume adjustment
range is “+18 dB - Maximum value of channel
level)
ADJUSTING THE TONE(BASS &
TREBLE) CONTROL.
S-DIRECT
AUTO
1
2
3
NIGHT
CSII
EX/ES
DSP
4
5
6
DISPLAY
M-CH ST
STEREO
6.1CH IN
7
8
9
CLEAR
MEMO
A/D
P.SCAN
TV
VCR1
DSS/VCR2
DVD
TUNER
CD
TAPE
CDR/MD
VOLUME
DOWN
ESET
F/P
DISPLAY
CDR/MD
TAPE
UP
TV
VOL.
MODE
AUX
AMP
SLEEP
MUTE
MAIN
VOL.
MUTE
CD
TUNER
OSD
MENU
OK
To temporarily silence all speaker outputs such as
when interrupted by a phone call, press the MUTE
button on the front panel or remote.
This will interrupt the output to all speakers and the
head-phone jack, but it will not affect any recording
or dubbing that may be in progress.
When the system is muted, the display will show
“MUTE” .
Press the MUTE button again to return to normal
operation.
USING THE SLEEP TIMER
DTS
POWER
TV
VCR1
DSS/VCR2
DVD
TUNER
CD
TAPE
CDR/MD
0
BASS
TREBLE
TUNE/SEARCH
AUX
AMP
SLEEP
MUTE
AV SURROUND RECEIVER SR4400
EXIT
TV
VOL.
SURROUND
SETUP/
T.TONE
CLEAR
A/D
AUTO
PHONES
6.1
CH-IN
DVD
3
CSII
4
5
6
M-CH ST
STEREO
6.1CH IN
7
8
9
A/D
P.SCAN
CLEAR
TV
2
NIGHT
HT-EQ
MEMO
EX/ES
0
CHANNEL/SKIP
TREBLE
F.DIRECT
ATT.
PTY
MAIN
VOL.
+/A /ANT
–/B /VCR
DSP
VCR1
BASS
DISP./RDS
DTS
DISPLAY
MEMORY
STANDBY
POWER ON/STANDBY
MODE
MENU OFF
1
Page 21
or
MODE
DISPLAY
S-DIRECT
SR4400N DFU_01_ENG 2_2
TV
TUNER
CHANNEL/SKIP
exit SETUP
MENU
or
VOLUME
OK
TO MAIN MENU
ADJUSTING THE MAIN VOLUME
Before you can listen to any input media, you must
first select the input source at the SR4400.
To adjust the bass effect , press BASS
BASS on the remote.
To adjust the treble effect , press TREBLE
TREBLE on the remote.
Notes :
• The tone control function can work for the front
left and front right speakers.
• When Source Direct mode is set, tone control is
disable.
SELECTING AN INPUT SOURCE.
E.G. : AUTO SURROUND
S(Subwoofer)LEV
To select the surround mode during playback, turn
the SURROUND knob on the front panel or press
the surround mode button on the remote .
ENGLISH
SURR. BACK :
Adjust the volume level of the surround back
speaker between -10 dB and +10 dB in 1 level
interval with or cursor button.
• If “None” was selected for the Surround back
speakers setting in the Speaker size, then this
setting will not appear.
CENTER :
Adjust the volume level of the center speaker
between -10 dB and +10 dB in 1 level interval
with or cursor button.
• If “None” was selected for the Center speaker
setting in the Speaker size, then this setting will
not appear.
SUB W :
Adjust the volume level of the subwoofer
speaker between -15 dB and +10 dB in 1 level
interval with or cursor button.
• If “None” was selected for the Subwoofer speaker
setting in the Speaker size, then this setting will
not appear.
TUNE/SEARCH
OSD
MENU
DISC/DECK
During a listening session you may wish to adjust
the Bass and Treble Control to suit your listening
tastes or room acoustics.
03.4.4, 9:25 AM
Adobe PageMaker 6.5J/PPC
To program the SR4400 for automatic standby,
press SLEEP buton on the remote.
Each press of the button will increase the time
before shut down in the following sequence.
21
ENGLISH
OFF
90
10
80
20
30
40
70
60
50
The sleep time will be shown for a few seconds in
the display on the front panel, and it will count
down until the time has elapsed.
When the programmed sleep time has elapsed, the
unit will automatically turn off.
Note that the SLEEP indicator on the display will
light up when the Sleep function is programmed.
To cancel the Sleep function, press the SLEEP
button until the display shows to “SLEEP OFF” and
the SLEEP indicator disappear.
SURROUND MODE
The SR4400 is equipped with many surround
modes. These are provided to reproduce a variety
of surround sound effects, according to the content
of the source to be played.
The available surround modes may be restricted
depending on the input signal and speaker setup.
When using the remote controll, press AMP button
and press the desired surround mode button.
S-DIRECT
DTS
1
2
3
CSII
EX/ES
DSP
4
5
6
DISPLAY
M-CH ST
STEREO
7
8
9
CLEAR
MEMO
A/D
P.SCAN
NIGHT
NIGHT MODE
AUTO
6.1CH IN
0
CHANNEL/SKIP
OSD
AUTO
MENU
OK
SETUP/
T.TONE
S-DIRECT
MENU OFF
DTS
AUTO
1
2
3
NIGHT
CSII
4
5
6
DISPLAY
M-CH ST
STEREO
6.1CH IN
7
8
9
A/D
P.SCAN
CLEAR
MEMO
EX/ES
DSP
0
CHANNEL/SKIP
BASS
TREBLE
TUNE/SEARCH
Press the NIGHT button on the remote to turn on
the NIGHT mode.
Selecting the Night Mode ON is effective in Dolby
Digital only, and it compresses the dynamic range.
This softens loud passages such as sudden
explosions, to help prevent disturbing others late at
night.
To turn off the Night mode, press the NIGHT button
again.
When this mode is selected, the receiver
determines whether the digital input signal is Dolby
Digital, Dolby Digital Surround EX, DTS, DTS-ES
or PCM-audio.
Surround EX & DTS-ES will operate for multi
channel source that has a Dolby Digital Surround
EX or DTS-ES auto trigger flag in the digital signal.
When a Dolby Digital or DTS signal is input, the
number of channels for which the corresponding
signal is encoded will be played.
Inputting a Dolby Digital two channel signal with
Dolby surround status automatically subjects that
signal to Pro Logic II movie processing before
play.
PCM 96 kHz source material can be played in this
mode.
Notes:
• When you use this mode with certain DVD and
CD players, performing operations such as “Skip”
or “Stop” may momentarily interrupt the output.
• When the signal is not decoded is input for using
mode, the mode is changed to AUTO mode
automatically. Refer to page 24 to confirm the
available decoding mode.
2 MODE
(Dolby Digital,Pro Logic II MOVIE, Pro Logic II
MUSIC, Pro Logic)
This mode is used with source materials encoded
in Dolby Digital and Dolby Surround.
DOLBY DIGITAL
This mode is enabled when playing source
materials encoded in Dolby Digital.
Playing multi-channel encoded 5.1-channel Dolby
Digital sources provides five main audio channels
(left, center, right, surround left and surround right)
and Low Frequency Effect channel.
Dolby Digital EX decoding is not available in this
mode.
Dolby Pro Logic II brings the excitement of
surround sound to any stereo mix, while making
existing Dolby Surround mixes sound more like
discrete 5.1 channels Surround sound.
Dolby Pro Logic II has below 3 modes.
Pro Logic II MOVIE
This mode provides 5.1 channel surround sound
from Dolby Surround encoded stereo movie sound
tracks.
Pro Logic II MUSIC
This mode provides 5.1 channel surround sound
from conventional stereo sources, analog or
digital, such as CD, tape, FM, TV, stereo VCR, etc.
Pro Logic
This mode emulated original Dolby Pro Logic
decoding (3/1 surround) suit for Dolby Surround
encoded stereo movie soundtracks.
Notes:
• Pro Logic II mode is available to 2ch input signal
which is encoded Dolby Digital or PCM format.
• PCM-audio signals can be subjected to Pro Logic
processing when the sampling frequency is 32
kHz, 44.1 kHz or 48 kHz.
EX/ES
This mode provides 6.1 channel surround for
DOLBY DIGITAL EX, DTS-ES encoded source
material such as DVD.
This mode cannot be used when an analog input
has been selected.
Dolby Digital EX
In a movie theater, film soundtracks that have
been encoded with Dolby Digital surround EX
technology are able to reproduce an extra channel
which has been added during the mixing of the
program.
This channel, called Surround Back , places
sounds behind the listener in addition to the
currently available front left, front center, front
right, surround right, surround left and subwoofer
channels.
This additional channel provides the opportunity
for more detailed imaging behind the listener and
brings more depth, spacious ambience and sound
localization than ever before.
Dolby Digital EX is not available in the system
without surround back speaker.
DTS-ES (Discrete 6.1, Matrix 6.1)
DTS-ES adds the surround back channel audio to
the DTS 5.1-channel format to improve the
acoustic positioning and makes acoustic image
movement more natural with the 6.1-channel
reproduction.
This receiver incorporates a DTS-ES decoder,
which can handle DTS-ES Discrete-encoded and
DTS-ES Matrix-encoded program sources from
DVD, etc..
DTS-ES Discrete 6.1 features digital discrete
recording of all channels including the surround
back channels and higher quality of audio
reproduction.
DTS-ES is not available in the system without
surround back speaker.
dts MODE
(dts, Neo:6 Cinema, Neo:6 Music)
This mode is for DTS encoded source materials
such as LASER
DISC, CD, and DVD and some 2channel signal
source.
dts : This mode is enabled when playing source
materials encoded in dts multi channel.
Playing multi-channel encoded 5.1-channel dts
sources provides five main audio channels (left,
center, right, surround left and surround right) and
Low Frequency Effect channel.
dts-ES decoding is not available in this mode.
The DTS mode cannot use when an analog input
has been selected.
Neo:6 Cinema, Neo:6 Music
This mode decodes 2-channel signals into 6channel signals using high-accuracy digital matrix
technology.
The DTS NEO:6 decoder has near-discrete
properties in the frequency characteristics of the
channels as well as in channel separation.
According to the signals to be played back, DTS
NEO:6 uses either the NEO:6 CINEMA mode
optimized for movie playback or the NEO:6 MUSIC
mode optimized for music playback.
Note:
• PCM-audio (32 kHz, 44.1 kHz or 48 kHz) and
analog source material can playback in this mode.
MULTI CH. ST
This mode is used to create a wider, deeper and
more natural soundstage from two channel source
material.
This is done by feeding the left channel signal to
both left front and left surround speaker and the
right channel signal to both right front and right
surround speaker. Additionally, the center channel
reproduces a mix of the right and left channel.
22
SR4400N DFU_01_ENG 2_2
Page 22
03.4.4, 9:25 AM
Adobe PageMaker 6.5J/PPC
Circle Surround is designed to enable multichannel surround sound playback of non-encoded
and multi-channel encoded material.
Backward compatibility provides listeners with up
to 6.1 channels of surround performance from
entire collection of music and film, including
broadcast, videotape and stereo recorded music.
Regarding to source material, you can select CSIICinema mode, CSII-Music mode or CSII-Mono
mode.
Note:
• PCM-audio (32 kHz, 44.1 kHz or 48 kHz) and
analog source material can playback in this mode.
VIRTUAL
This mode creates a virtualized surround sound
experience from a two-speaker (front L and R)
playback system playing any multi-channel audio
source (such as found on DVDs and digital
broadcasts), including Dolby Digital, Dolby Pro
Logic or DTS.
DSP SURROUND (MOVIE, HALL, STADIUM,
MATRIX)
These modes provide surround effect processing
from each input source material.
They will produce theater, concert hall and stadium
like atmospheres. Select as your taste desires.
Note:
• When using the remote control, press the numeric
button 6 (DSP) to change the surround effect.
• PCM-audio (32 kHz, 44.1 kHz or 48 kHz) and
analog source material can playback in this mode.
STEREO
This mode bypasses all surround processing.
Stereo program sources the left and right channels
play normally when PCM-audio or analog stereo is
input.
With Dolby Digital and DTS sources, the 5.1 multichannels are converted to two channel stereo. 96
kHz PCM source material can be playback in
stereo mode.
S (SOURCE ) - DIRECT
In the source direct mode, the tone control circuit
and bass management configuration are bypassed
for full range frequency response and the purist
audio reproduction.
96 kHz PCM source material can be play back in
this mode.
Notes:
• Internal speaker size is setup to front L/R = Large,
Center = Large, Surround L/R = Large and
Subwoofer = yes automatically. Tone controls
and additional processing are also defeated.
• When you use this mode with certain DVD and CD
players, performing operations such as “Skip” or
“Stop” may momentarily interrupt the output.
CAUTION
NOTE for DTS signal
* Connected DVD-player, laser-disc player or CDplayer needs to support DTS-digital output. You
may not be able to play some DTS source
signals from certain CD players and LD players
even if you connect the player to the SR4400
digitally. This is because the digital signal has
been processed (such as the output level,
sampling frequency, or frequency response)
and the SR4400 cannot recognize the signal as
DTS data.
* Depending on the player used, DTS play may
produce short noise. This is not a malfunction. In
such cases, select the surround mode the “DTS”
or “DTS-ES”.
* While signals from DTS-laser disc or CD are
playing in another Surround mode, you cannot
switch to digital input or from digital input to
analog input by INPUT SETUP in SETUP MAIN
MENU or A/D button.
* The outputs for the VCR 1 OUT, DSS/VCR 2
OUT, TAPE OUT, and CD-R OUT output analog
audio signals. Do not record from CDs or LDs
that support DTS using these outputs. If you do,
the DTS-encoded signal will be recorded as
noise.
The relation between the selected surround
mode and the input signal
The surround mode is selected with the surround
mode knob on SR4400 or the remote control unit.
However, the sound you hear is subject to the
relationship between the selected surround mode
and input signal. That relationship is as next page;
ENGLISH
CIRCLE SURROUND II (CSII-CINEMA, CSII-MUSIC,
CSII-MONO)
NOTE for Dolby Digital Surround EX signal
* When playing Dolby Digital Surround EXencoded software in 6.1 channels, it is required
to set the EX/ES mode.
* Note that some of Dolby Digital Surround EXencoded software does not contain the
identification signal. In this case, set the EX/ES
mode manually.
NOTE for 96kHz PCM audio
* AUTO, Source- DIRECT, and STEREO modes
can be used when playing PCM signals with a
sampling frequency of 96 kHz (such as from
DVD-Video discs that contain 24 bit, 96 kHz
audio). If such signals are input during playback
in one of the other surround modes, output from
SR4400 will be muted.
* Certain DVD player models inhibit digital output.
For details, refer to the player’s operation
manual.
* Some DVD formatted discs featured copy
protection. When using such disc, 96 kHz PCM
signal is not output from the DVD player. For
details, refer to the player's operation manual.
23
SR4400N DFU_01_ENG 2_2
Page 23
03.4.4, 9:25 AM
Adobe PageMaker 6.5J/PPC
ENGLISH
Surround Mode
Input Signal
Decoding
AUTO
Dolby Surr. EX
Dolby D (5.1ch)
Dolby D (2ch)
Dolby D (2ch Surr)
DTS-ES
Dolby Digital EX
Dolby Digital 5.1
Dolby Digital 2.0
Pro Logic II movie
DTS-ES
L/R
O
O
O
O
O
Output Channel
SL
C SR SB SW
O O O O
O O - O
- O
O O - O
O O O O
DTS (5.1ch)
PCM (Audio)
PCM 96kHz
Analog
Dolby D Surr. EX
Dolby D (5.1ch)
Dolby D (2ch)
Dolby D (2ch Surr)
DTS-ES
DTS 5.1
PCM (Stereo)
PCM (96kHz Stereo)
Stereo
Dolby Digital EX
Dolby Digital 5.1
Dolby Digital 2.0
Pro Logic II movie
DTS-ES
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
DTS (5.1ch)
PCM (Audio)
PCM 96kHz
Analog
Dolby D Surr. EX
Dolby D (5.1ch)
DTS-ES
DTS 5.1
PCM (Stereo)
PCM (96kHz Stereo)
Stereo
Dolby Digital EX
Dolby Digital EX
DTS-ES
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
DTS (5.1ch)
Dolby D Surr. EX
Dolby D (5.1ch)
Dolby D (2ch)
Dolby D (2ch Surr)
PCM (Audio)
Analog
DTS-ES
DTS (5.1ch)
PCM (Audio)
Analog
PCM (Audio)
Analog
DTS-ES
Dolby Digital 5.1
Dolby Digital 5.1
Pro Logic II
Pro Logic II
Pro Logic II
Pro Logic II
DTS 5.1
DTS 5.1
Neo:6
Neo:6
CSII
CSII
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Dolby Surr. EX
Dolby D (5.1ch)
Dolby D (2ch)
Dolby D (2ch Surr)
DTS-ES
DTS (5.1ch)
PCM (Audio)
PCM 96kHz
Analog
Dolby Surr. EX
Dolby D (5.1ch)
Dolby D (2ch)
Dolby D (2ch Surr)
DTS-ES
DTS (5.1ch)
PCM (Audio)
Analog
Dolby Surr. EX
Dolby D (5.1ch)
Dolby D (2ch)
Dolby D (2ch Surr)
DTS-ES
DTS (5.1ch)
PCM (Audio)
Analog
PCM (Audio)
Analog
Stereo
Stereo
Stereo
Stereo
Stereo
Stereo
Stereo
Stereo
Stereo
Virtual
Virtual
Virtual
Virtual
Virtual
Virtual
Virtual
Virtual
Dolby Digital EX
Dolby Digital EX
Multi Channel Stereo
Multi Channel Stereo
DTS-ES
DTS-ES
Multi Channel Stereo
Multi Channel Stereo
DSP
DSP
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
-
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
S-DIRECT
EX/ES
DOLBY
(PLII MOVIE)
(PLII MUSIC)
(PRO LOGIC)
DTS
(Neo:6 Cinema)
(Neo:6 Music)
CSII CINEMA
CSII MUSIC
CSII MONO
STEREO
VIRTUAL
MULTI CH ST
DSP SURROUND
(MOVIE)
(HALL)
(STADIUM)
(MATRIX)
Front information display
Dot matrix display
DOLBY D EX
DOLBY D
DOLBY D
DOLBY PL II MV
DTS-ES Disc or
DTS-ES Mtrx
DTS
STEREO
STEREO
STEREO
DOLBY D EX
DOLBY D
DOLBY D
DOLBY PL II MV
DTS-ES Disc or
DTS-ES Mtrx
DTS
STEREO
STEREO
STEREO
DOLBY D EX
DOLBY D EX
DTS-ES Disc or
DTS-ES Mtrx
DTS-ES Mtrx
DOLBY D
DOLBY D
DOLBY PL
or DOLBY PLII MV
or DOLBY PLII MS
DTS
DTS
NEO:6 CINEMA
or NEO:6 MUSIC
CSII CINEMA
or CSII MUSIC
or CSII MONO
STEREO
STEREO
STEREO
STEREO
STEREO
STEREO
STEREO
STEREO
STEREO
VIRTUAL
VIRTUAL
VIRTUAL
VIRTUAL
VIRTUAL
VIRTUAL
VIRTUAL
VIRTUAL
M-CH STEREO
M-CH STEREO
M-CH STEREO
M-CH STEREO
M-CH STEREO
M-CH STEREO
M-CH STEREO
M-CH STEREO
MOVIE
or HALL
or STADIUM
or MATRIX
Signal format indicators
2 DIGITAL, EX
2 DIGITAL
2 DIGITAL
2 DIGITAL, 2 SURROUND
dts, ES
Channel status
L, C, R, SL, SR, S, LFE
L, C, R, SL, SR, LFE
L, R
L, R, S
L, C, R, SL, SR, S, LFE
dts
PCM
PCM, 96kHz
ANALOG
2 DIGITAL, EX
2 DIGITAL
2 DIGITAL
2 DIGITAL , 2 SURROUND
dts, ES
L, C, R, SL, SR, LFE
L, R
L, R
L, C, R, SL, SR, S, LFE
L, C, R, SL, SR, LFE
L, R
L, R, S
L, C, R, SL, SR, S, LFE
dts
PCM
PCM, 96kHz
ANALOG
2 DIGITAL, EX
2 DIGITAL
dts, ES
L, C, R, SL, SR, LFE
L, R
L, R
L, C, R, SL, SR, S, LFE
L, C, R, SL, SR, LFE
L, C, R, SL, SR, S, LFE
dts
2 DIGITAL, EX
2 DIGITAL
2 DIGITAL
2 DIGITAL, 2 SURROUND
PCM
ANALOG
dts, ES
dts
PCM
ANALOG
PCM
ANALOG
L, C, R, SL, SR, LFE
L, C, R, SL, SR, S, LFE
L, C, R, SL, SR, LFE
L, R
L, R, S
L, R
L, C, R, SL, SR, S, LFE
L, C, R, SL, SR, LFE
L, R
L, R
L, R
-
2 DIGITAL, EX
2 DIGITAL
2 DIGITAL
2 DIGITAL, 2 SURROUND
dts, ES
dts
PCM
PCM, 96kHz
ANALOG
2 DIGITAL, EX
2 DIGITAL
2 DIGITAL
2 DIGITAL , 2 SURROUND
dts, ES
dts
PCM
ANALOG
2 DIGITAL, EX
2 DIGITAL
2 DIGITAL
2 DIGITAL, 2 SURROUND
dts, ES
dts
PCM
ANALOG
PCM
ANALOG
L, C, R, SL, SR, S, LFE
L, C, R, SL, SR, LFE
L, R
L, R, S
L, C, R, SL, SR, S, LFE
L, C, R, SL, SR, LFE
L, R
L, R
L, C, R, SL, SR, S, LFE
L, C, R, SL, SR, LFE
L, R
L, R, S
L, C, R, SL, SR, S, LFE
L, C, R, SL, SR, LFE
L, R
L, C, R, SL, SR, S, LFE
L, C, R, SL, SR, LFE
L, R
L, R, S
L, C, R, SL, SR, S, LFE
L, C, R, SL, SR, LFE
L, R
L, R
-
Dolby Surr.EX:
Dolby Digital stream with Surround EX flag
DTS-ES:
DTS digital stream with ES flag.
Dolby D(2ch Surr) :
2channel Dolby Digital stream with Dolby
Surround flag
L/R
C
SL/SR
SB
SW
=
=
=
=
=
Front Left and Right speakers
Center speaker
Surround Left and Right speakers
Surround back speaker
Sub woofer speaker
24
SR4400N DFU_01_ENG 2_2
Page 24
03.4.4, 9:25 AM
Adobe PageMaker 6.5J/PPC
DIMMER (DISPLAY)
ATTENUATION TO ANALOG INPUT
SIGNAL
SETUP/
T.TONE
VOLUME
S-DIRECT
TREBLE
2
CSII
EX/ES
4
5
6
M-CH ST
STEREO
6.1CH IN
MODE
7
8
9
MEMO
A/D
P.SCAN
UP
TUNE/SEARCH
ET
DISP./RDS
F/P
F.DIRECT
DISPLAY
MODE
DISPLAY
DIMMER
CLEAR
MUTE
DTS
1
NIGHT
DOWN
BASS
MENU OFF
AUTO
3
DSP
0
CDR/MD
TAPE
CD
In Digital mode, input is fixed to an assigned digital
input terminal.
In analog mode, the analog input jacks are
selected.
This selecting is temporarily, so the result will not be
stored in memory.
If you need to change input mode completely, use
SYSTEM SETUP in SETUP menu system.(see
page 16)
HT-EQ
TUNER
CHANNEL/SKIP
+/A /ANT
–/B /VCR
ATT.
PTY
BASS
DISC/DECK
TREBLE
MODE
• Digital input signals are only output to the digital
outputs. There is no conversion from digital to
analog .
When connecting CD players and other digital
components, do not connect only the digital
terminals, but the analog ones as well.
ENGLISH
OTHER FUNCTION
TUNE/SEARCH
DISP./RDS
F.DIRECT
SYSTEM REMOTE CONTROLLER
AV SURROUND RECEIVER SR4400
RC5400SR
RECORDING AN ANALOG SOURCE
When the input signal is too high and the voice
distorts even by throttling the SR4400 VOLUME
control, turn on this function. “ATT” is indicated
when this function is activated.
“ATT” indicator will light up when this function is
activated. The signal-input level is reduced by
about the half. Attenuation will not work with the
output signal of TAPE-OUT, CD-R/MD-OUT,
VCR1-OUT and DSS/VCR2-OUT.
This function is memorized for each individual
input source.
You can change the display brightness of the front
display.
Press the DISPLAY button to change the
brightness.
When this button is pressed, the brightness is
changed in the following sequence.
→ dimmed → Display Off → normal → dimmed
....
In normal operation, the audio or video source
selected for listening through the SR4400 is sent to
the record outputs.
This means that any program you are watching or
listening to may be recorded simply by placing
machines connected to the outputs for TAPE OUT
, CD-R/MD OUT, VCR1 OUT, and DSS/VCR2
OUT in the record mode.
Note:
• Only DISP indicator will light up on the front
display in display off condition
To record the input source signal you are
currently watching or listening to
1.
POWER
SELECTING ANALOG AUDIO INPUT
OR DIGITAL AUDIO INPUT
ND RECEIVER SR4400
LISTENING OVER HEADPHONES
CLEAR
A/D
This jack may be used to listen to the SR4400’s
output through a pair of headphones. Be certain
that the headphones have a standard 1/4" stereo
phone plug. (Note that the main room speakers will
automatically be turned off when the headphone
jack is in use.)
SETUP/
T.TONE
AV SURROUND RECEIVER SR4400
S-DIRECT
6.1
ES
AUTO
1
CLEAR
A/D
MEMORY
NIGHT
CSII
4
5
6
M-CH ST
STEREO
6.1CH IN
7
8
9
A/D
P.SCAN
CLEAR
HT-EQ
MEMO
EX/ES
6.1
CH-IN
TV
DVD
VCR1
CHANNEL/SKIP
TREBLE
1.
POWER ON/STANDBY
PHONES
6.1
CH-IN
TV
DVD
DISP./RDS
F.DIRECT
2.
S-DIRECT
VCR1
DSS/VCR2
CDR/
Notes:
• When using headphones, the surround mode will
automatically change to STEREO.
• The surround mode returns to the previous setting
as soon as the plug is removed from the jack.
TV
DVD
VCR1
DSS/VCR2
CDR/MD
TAPE
CDR/MD
MUTE
CD
TUNER
TV
VOL.
OSD
TUNE/SEARCH
TUNING/PRESET
HT-EQ
CH-IN
DVD
TAPE
AUX
AMP
SLEEP
MUTE
MAIN
VOL.
A/D
MEMORY
TUNING/PRESET
HT-EQ
F/P
S-DIRECT
MODE
DISPLAY
MUTE
STANDBY
POWER ON/STANDBY
PHONES
6.1
CH-IN
TV
DVD
VCR1
DSS/VCR2
CDR/MD
TAPE
CD
TUNER
Press the HT-EQ button on the front panel to turn
on the HT-EQ mode.
The tonal balance of a film soundtrack will be
excessively bright and harsh when played back
over audio equipment in the home. This is because
film soundtracks were designed to be played back
in large movie theater environments.
Activating the HT-EQ feature when watching a film
made for movie theaters corrects this and restores
the correct tonal balance.
The HT-EQ feature can be activated only while in
Dolby Pro Logic Mode, or while decoding Dolby
Digital or DTS encoded material.
DSP
0
PHONES
MODE
MEMORY
1.
MODE
DISPLAY
DSS/VCR2
CD
DOWN
CLEAR
3
DISPLAY
STANDBY
POWER ON/STANDBY
2
AV SURROUND RECEIVER SR4400
CLEAR
F/P
S-DIRECT
VCR1
DTS
SURROUND
A/D
TUNING/PRESET
HT-EQ
MENU OFF
SURROUND
BASS
STANDBY
MEMORY
TV
TUNER
SURROUND
If you have already assign any digital input to input
source.
You can select temporarily the audio input mode
for each input source with the A/D button on the
remote controller or front panel.
When this button is pressed, the input mode is
switched in the following sequence.
→ Digital Auto → Digital → Analog → Digital
Auto....
In Digital Auto mode, the types of signals being
input to the digital and analog input jacks for the
selected input source are detected automatically.
If no digital signal is being input, the analog input
jacks are selected automatically.
3.
MENU
Select the input source to record by pressing
the corresponding input selector button.
The input source is now selected and you may
watch or listen to it as desired.
Outputs the currently selected input source
signal to the TAPE OUT , CD-R/MD OUT,
VCR1 OUT, and DSS/VCR2 OUT outputs for
recording.
Start recording at the recording component as
desired.
Notes:
• If you change the input source during recording,
you will record the signals from the newly
selected input source.
• You cannot record the surround effects.
6.1 CH INPUT.
The SR4400 is equipped for future expansion
through the use of Multi channel SACD multi
channel player or DVD-Audio player.
This is selected, the input signals connected to the
Front left, Front right, Center, Surround left,
Ssurround right and Surround back channels of
the 6.1 CH. In jacks are output directly to the front
(left and right), center, surround (left and right) and
surround back speaker systems as well as the preout jacks without passing through the surround
circuitry.
In addition, the signal input to the SW (subwoofer)
jack is output to the PRE OUT SW (subwoofer)
jack.
When 6.1 CH. INPUT is selected, the last video
input used remains routed to the Monitor Outputs.
This permits simultaneous viewing with video
sources.
25
SR4400N DFU_01_ENG 2_2
Page 25
03.4.4, 9:25 AM
Adobe PageMaker 6.5J/PPC
ENGLISH
2.
SETUP/
T.TONE
MENU OFF
S-DIRECT
AUTO
1
2
3
NIGHT
CSII
EX/ES
DSP
4
5
6
DISPLAY
M-CH ST
STEREO
7
8
9
CLEAR
MEMO
A/D
P.SCAN
AV SURROUND RECEIVER SR4400
DTS
SURROUND
CLEAR
A/D
2.
MEMORY
6.1CH IN
BASIC OPERATION
(TUNER)
MANUAL TUNING
3.
(FM) TUNING MODE (AUTO STEREO OR MONO)
2. 1.
VOL
0
CHANNEL/SKIP
HT-EQ
1.
LISTENING TO THE TUNER
TV
VCR1
DSS/VCR2
DVD
TUNER
CD
TAPE
CDR/MD
VOLUME
TV
VOL.
AUX
AMP
SLEEP
MUTE
MODE
MAIN
VOL.
+/A /ANT
DOWN
STANDBY
–/B /VCR
DISP./RDS
F.DIRECT
ATT.
PTY
UP
DOWN
DISC/DECK
POWER ON/STANDBY
PHONES
6.1
CH-IN
TV
DVD
VCR1
BASS
TREBLE
ET
TUNE/SEARCH
CLEAR
MEMORY
TUNING/PRESET
F/P
CLEAR
MODE
MEMO
A/D
F/P
MODE
P.SCAN
0
MODE
DISP./RDS
F.DIRECT
AUTO TUNING
DISPLAY
HT-EQ
/A /ANT
1.
2.
3.
4.
/B /VCR
ATT
S-DIRECT
DISPLAY
DVD
VCR1
DSS/VCR2
CDR/MD
TAPE
CD
Select a desired Video source to decide the
routed video signal to the Monitor Outputs .
Press the 6.1 CH-IN button on the front panel
or on the remote to switch the 6.1 channel
input.
If necessary to adjust the output level of each
channel, use “6.1 Ch. INPUT LEVEL” in
SETUP menu system as desired.
Adjust the speaker output levels so that you
can hear the same sound level from each
speaker at the listening position. For the front
left, front right, center, surround left, surround
right and surround back speakers, the output
levels can be adjusted between –10 to +10
dB.
The subwoofer can be adjusted between –15
and +10 dB.
These adjusting result will be stored to 6.1 Ch.
INPUT condition. (see to page 20)
Adjust the main volume with the MAIN
VOLUME knob or the VOL buttons on the
remote.
To cancel the 6.1 Ch. INPUT setting, press the 6.1
CH-IN button on the front panel or on the remote.
Notes:
• When the 6.1 Ch. Input is in use, you may not
select a surround mode, as the external decoder
determines processing.
• In addition, there is no signal at the record outputs
when the 6.1 Ch. Input is in use.
TV
2. 1.
V
1.
TUNER
TV
VOL.
VCR1
CD
DSS/VCR2
2.
TAPE
AUX
AMP
SLEEP
MUTE
DVD
CLEAR
MEMORY
TUNING/PRESET
HT-EQ
TV
DVD
F/P
S-DIRECT
VCR1
DSS/VCR2
DISPLAY
CDR/MD
TAPE
MEMO
MODE
MAIN
VOL.
CD
A/D
P.SCAN
0
CHANNEL/SKIP
MUTE
TUNER
2.
BASS
TREBLE
MODE
+/A /ANT
–/B /VCR
BASS
TREBLE
TUNE/SEARCH
DISP./RDS
F.DIRECT
ATT.
PTY
(USING THE SR4400)
1. To select tuner and desired band (FM or AM),
press the TUNER button on the front panel.
2. Press the F/P(Frequency/Preset) button on
the front panel to appears frequency on the
display.
3. Press the TUNING or button on the front
panel for more than 1 second to start the Auto
tuning function.
4. Automatic searching begins then stops when
a station is tuned in.
+/A /ANT
–/B /VCR
MODE
DISP./RDS
F.DIRECT
ATT.
PTY
(Using the remote control unit)
1. To select tuner and desired band (FM or AM),
press TUNER button twice within in two
seconds on the remote.
2. Press 5 or 6 on the remote to tune in the
desired station.
3.
POWER
(Using the remote control unit)
1. To select tuner and desired band (FM or AM),
press the TUNER button twice within in two
seconds on the remote.
2. Press 5 or 6 more than 1 second on the
remote.
3. Automatic searching begins then stops when
a station is tuned in.
If tuning does not stop at the desired station, use to
the “Manual tuning” operation.
VCR1
DSS/VCR2
DTS
S-DIRECT
AUTO
1
2
3
NIGHT
CSII
EX/ES
DSP
4
5
6
M-CH ST
STEREO
6.1CH IN
7
8
9
A/D
P.SCAN
DISPLAY
CLEAR
TV
When in the auto stereo mode, AUTO indicator
keeps to light on the display.
The “ST” indicator lights on when a stereo
broadcast is tuned in.
At open frequencies, the noise is muted and the
“TUNED” and “ST” indicators turn off.
If the signal is weak, it may be difficult to tune into
the station in stereo. In such a case, press the
MODE button on the front panel or on the remote.
“AUTO” indicators turn off ,FM stereo broadcasts
are received in monaural and the “ST” indicator
turns off.
To return to auto stereo mode, press the MODE
button on the front panel or on the remote again.
AUTO indicator lights on the display.
PRESET MEMORY
DIRECT FREQUENCY CALL
MEMO
With this unit you can preset up to 30 FM/AM
stations in any order.
For each station, you can memorize the frequency
and reception mode if desired.
0
DVD
CHANNEL/SKIP
1.
TUNER
CD
TAPE
CDR/MD
BASS
AUX
TV
VOL.
SLEEP
TREBLE
TUNE/SEARCH
AMP
MUTE
VOL.
2.
MODE
+/A /ANT
–/B /VCR
DISP./RDS
F.DIRECT
ATT.
PTY
DISC/DECK
OSD
AUTO PRESET MEMORY
This function automatically scans the FM and AM
band and enters all stations with proper signal
strength into the memory.
5. 2. 2.4. 3. 2) 1. 3.1)
MENU
SYSTEM REMOTE CONTROLLER
1.
2.
4.
To select tuner and desired band (FM or AM),
press the TUNER on the remote.
Press the F.DIRECT button on the remote,
display will show “FREQ - - - ”.
Input your desired station’s frequency with
numeric buttons on the remote.
The desired station will automatically be
tuned.
AV SURROUND RECEIVER SR4400
SURROUND
DOWN
A/D
PHONES
2.
26
03.4.4, 9:25 AM
VOLUME
CLEAR
1.
Page 26
TUNER
TUNE/SEARCH
(USING THE SR4400)
1. To select tuner and desired band (FM or AM),
press the TUNER button on the front panel
2. Press the F/P(Frequency/Preset) button on
front panel to appears frequency on the
display.
3. Press the TUNING or button.
3.
SR4400N DFU_01_ENG 2_2
CD
CDR/MD
DOWN
CLEAR
RC5400SR
TAPE
TUNER
PTY
3.
SYSTEM REMOTE CONTROLLER
MUTE
CHANNEL/SKIP
MUTE
CDR/MD
TV
Adobe PageMaker 6.5J/PPC
6.1
CH-IN
MEMORY
TUNING/PRESET
HT-EQ
TV
DVD
F/P
S-DIRECT
VCR1
DSS/VCR2
DISPLAY
CDR/MD
TAPE
UP
MODE
MUTE
CD
TUNER
To select FM , press the TUNER button on the
front panel.
While pressing the MEMORY button, press
the TUNING button to up.
3.
4.
5.
2.
Press the MEMO button on the remote unite.
“– –“ (preset number)starts blinking on the
display.
Enter the desired preset number by pressping
numeric buttons.
3.
Note:
• When entering a single digit number (2 for
example), either input “02” or just input “2” and
wait for a few seconds.
3.
You can fast forward the preset stations by
pressping the § continuously.
When the desired preset station is received,
cancel the preset scan operation by pressping
the CLEAR or P.SCAN.
NAME INPUT OF THE PRESET STATION.
This function allows the name of each preset
channel to be entered using alphanumeric
characters.
Before name inputting, need to store preset
stations with the preset memory operation.
CLEARING STORED PRESET STATIONS
4.
You can remove preset stations from memory
using the following procedure.
AV SURROUND RECEIVER SR4400
RECALLING A PRESET STATION
3.
SETUP/
T.TONE
2.
2.
AV SURROUND RECEIVER SR4400
SURROUND
2.
1.
SETUP/
T.TONE
S-DIRECT
AUTO
1.
A/D
6.1
CH-IN
TUNING/PRESET
HT-EQ
TV
DVD
F/P
S-DIRECT
VCR1
DSS/VCR2
TAPE
3
EX/ES
DSP
4
5
6
DISPLAY
M-CH ST
STEREO
7
8
9
CLEAR
MEMO
A/D
P.SCAN
EX/ES
1.
MUTE
3
NIGHT
CSII
4
5
6
M-CH ST
STEREO
6.1CH IN
7
8
9
MEMO
A/D
P.SCAN
CLEAR
MEMORY
3.
TUNING/PRESET
DSP
A/D
HT-EQ
S-DIRECT
STANDBY
POWER ON/STANDBY
PHONES
6.1
CH-IN
TV
DVD
VCR1
DSS/VCR2
BASS
TREBLE
MODE
CD
CD
TUNER
MODE
+/A /ANT
–/B /VCR
F.DIRECT
ATT.
PTY
TUNE/SEARCH
DISP./RDS
F.DIRECT
2. 4.
3.
OK
SETUP/
T.TONE
CLEAR
A/D
6.1
CH-IN
MEMORY
TUNING/PRESET
HT-EQ
TV
DVD
F/P
S-DIRECT
VCR1
DSS/VCR2
MODE
DISPLAY
CDR/MD
TAPE
MUTE
CD
TUNER
3.
2.
MENU OFF
DTS
S-DIRECT
AUTO
1
2
3
NIGHT
CSII
EX/ES
DSP
4
5
6
M-CH ST
STEREO
6.1CH IN
7
8
9
A/D
P.SCAN
DISPLAY
CLEAR
MEMO
0
CHANNEL/SKIP
BASS
TREBLE
MODE
TUNE/SEARCH
DISP./RDS
F.DIRECT
(Using the SR4400)
1. Tune into the radio station you desire (Refer to
the “MANUAL TUNING” or “AUTO TUNING”
section).
2. Press the MEMORY button on the front panel.
“– –“ (preset number) starts blinking on the
display.
3. Select the preset number by pressing the
TUNING
or
button, while this is still
blinking (approx. 5 seconds)
4. Press the MEMORY button again to enter.
The display stops blinking.
The station is now stored in the specified
preset memory location.
(Using the remote control unit)
1. Tune into the radio station you desire (Refer to
the “MANUAL TUNING” or “AUTO TUNING”
section).
SR4400N DFU_01_ENG 2_2
Page 27
(Using the SR4400)
1. Press the F/P button to show the preset
station on the display.
2. Select the desired preset station by pressing
the TUNING or button on the front panel
(Using the remote control unit)
1. Press the 4 or ¢ button to select the
desired preset station, or input your desired
preset channel with numeric buttons on the
remote.
PRESET SCAN
SETUP/
T.TONE
1.
3.
3.
S-DIRECT
MENU OFF
AUTO
DTS
1
2
3
CSII
EX/ES
DSP
4
5
6
DISPLAY
M-CH ST
STEREO
7
8
9
CLEAR
MEMO
A/D
P.SCAN
NIGHT
A/D
PHONES
2. 5. 6.
3.
2.
3.
4.
Recall the preset number to be cleared with
the method described in “RECALLING” a
preset station.
Press the MEMORY button on the front panel or
press MEMO button on the remote.
Stored preset number blinks in the display for
5 seconds. While blinking, press the CLEAR
button on the front panel or press CLEAR on
the remote unit.
“xx CLEAR” appears on the display to
indicate that the specified preset number has
been cleared.
Notes:
• To clear stored all preset stations, press and hold
the CLEAR and the F/P buttons for two seconds.
5.
4.
3.
MODE
1.
2.
3.
4.
6.1CH IN
+/A /ANT
–/B /VCR
TUNE/SEARCH
DISP./RDS
F.DIRECT
ATT.
PTY
MODE
6.1
CH-IN
HT-EQ
TV
S-DIRECT
DVD
VCR1
DSS/VCR2
DISPLAY
CDR/MD
TAPE
MUTE
CD
TUNER
NIGHT
CSII
4
5
6
DISPLAY
M-CH ST
STEREO
DISC/DECK
(Using the remote control unit)
1. Press the P.SCAN on remote.
“PRESET SCAN” appears on the display and
then the preset station with the lowest preset
number is recalled first.
2. Preset stations are recalled in sequence (No.1
→ No.2 → etc.) for 5 seconds each.
No stored preset number will be skipped.
EX/ES
6.1CH IN
DSP
7
8
9
CLEAR
MEMO
A/D
P.SCAN
0
CHANNEL/SKIP
TREBLE
MODE
+/A /ANT
–/B /VCR
TUNE/SEARCH
DISP./RDS
F.DIRECT
ATT.
PTY
DISC/DECK
RC5400SR
0
TREBLE
F/P
SYSTEM REMOTE CONTROLLER
CHANNEL/SKIP
BASS
TUNING/PRESET
TUNE/SEARCH
DISP./RDS
DISC/DECK
TREBLE
MEMORY
STANDBY
POWER ON/STANDBY
CHANNEL/SKIP
BASS
DOWN
CLEAR
6.1CH IN
MODE
DISPLAY
CDR/MD
2
CSII
CHANNEL/SKIP
0
MEMORY
1
NIGHT
0
DISPLAY
CLEAR
CLEAR
AUTO
DTS
2
DTS
S-DIRECT
MENU OFF
1
R SR4400
V
MENU OFF
BASS
D RECEIVER SR4400
2. 5. 6. 5.
4.
SURROUND
1.
MANUAL PRESET MEMORY
ENGLISH
“AUTO PRESET” will appear on the display,
and scanning starts from lowest frequency.
Each time the tuner finds a station, scanning
will pause and the station will be played for
five seconds.
During this time, the following operations are
possible.
• The band can be changed by TUNER
button .
If no button is pressed during this period, the
current station is memorized in location Preset
02
If you wish to skip the current station, press
the TUNING button during this period, this
station is skipped and auto presetting
continues.
Operation stops automatically when all 30
preset memory positions are filled or when
auto scanning attains the highest endof all
bands. If you desire to stop the auto preset
memory at anytime, press the CLEAR button.
5.
Recall the preset number to be inputted name
with the method described in “RECALLING” a
preset station.
Press the MEMORY button on the front panel
or press MEMO on the remote for more than 3
seconds.
The left most column of the station name
indicator flashes, indicating the character
entry ready status.
When the SELECT knob is turned or press 5
/ 6 button on the remote, alphabetic and
numeric characters will be displayed in the
following order:
A → B → C ... Z → 1 → 2 → 3 ..... 0 → – → +
→ / → (Blank) → A
UP →
← DOWN
To clear the input charcter, press the CLEAR
button on the front panel or on the remote.
After selecting the first character to be
entered, press the MEMORY button on the
front panel, or press MEMO button on the
remote.
The entry in this column is fixed and the next
column starts to flash. Fill the next column
same as.
27
03.4.4, 9:25 AM
Adobe PageMaker 6.5J/PPC
ENGLISH
6.
To move back and forth between the
characters, press the TUNING / button or
press 4 / ¢ buttons on the remote.
Note:
• Unused columns should be filled by entering
blanks.
To save name, press the MEMORY button,
press MEMO button on the remote for more
than 2 seconds.
PTY AUTO SEARCH
RDS OPERATION
Now in use in many countries, RDS (Radio Data
System) is a description of the station’s
programming hidden space in the FM signal.
Your new receiver is equipped with RDS to assist
in the selection of FM stations using station and
network names, rather than broadcast
frequencies. Additional RDS functions include the
ability to search for programme types.
Your receiver is equipped to automatically search
for stations transmitting any of 29 different
programme types. To search for a PTY, follow
these procedures:
T.TONE
2.
2.
DTS
S-DIRECT
AUTO
1
2
3
NIGHT
CSII
EX/ES
DSP
4
5
6
DISPLAY
M-CH ST
STEREO
6.1CH IN
7
8
9
CLEAR
MEMO
A/D
P.SCAN
VOLUME
0
CHANNEL/SKIP
DOWN
BASS
• You can input the alphabetic and numeric
characters with the ten keypad of the remote
control in the previous step 4 and 5.
7.
S-DIRECT
AUTO
1
2
3
NIGHT
CSII
EX/ES
DSP
4
5
6
DISPLAY
M-CH ST
STEREO
6.1CH IN
7
8
9
CLEAR
MEMO
A/D
P.SCAN
DTS
0
CHANNEL/SKIP
8.
BASS
TREBLE
MODE
7.
8.
TUNE/SEARCH
DISP./RDS
MEMORY
RADIO TEXT
TUNING/PRESET
HT-EQ
Some RDS stations broadcast RADIO TEXT,
which is additional information on the station and
programme being broadcast.
RADIO TEXT information appears as ‘running’ text
in the display. RADIO TEXT is transmitted
character by the radio station. As a result of that it
may take some time until the entire text has been
completely received.
DVD
S-DIRECT
VCR1
1.
F.DIRECT
Enter the character using the ten keypad. For
example, to enter “A”:
1) Press the “1” button. “A” appears on the
display column.
2) Every time the 1 button is pressed, the
displayed character changes in the order: A
→ B → C → 1 → A...
Pressing buttons other than the “1” button
cause different characters to be displayed in a
similar way, so that other alphanumeric
characters can be entered. To enter a blank
or space, press the “9” button.
When the desired character is displayed,
press the MEMO button to confirm the entry in
this column and move to the next column.
After having filled all of the 8 columns, press
the MEMO button, for more than 1 second to
confirm the entry.
RDS DISPLAY
When a receiver is tuned to an FM station that is
transmitting RDS data, the Front Panel Information
Display will automatically show the station name or
RDS TEXT in place of the typical display of the
station’s broadcast frequency.
To change the display, press the DISP./RDS button
on the remote.
2.
3.
CHANNEL/SKIP
BASS
TREBLE
MODE
+/A /ANT
TUNE/SEARCH
DISP./RDS
F.DIRECT
ATT.
PTY
–/B /VCR
DISC/DECK
4.
SYSTEM REMOTE CONTROLLER
RC5400SR
RT (RADIO TEXT)
PS (Program Service Name)
Frequency
F/P
DSS/VCR2
DISPLAY
CDR/MD
TAPE
TREBLE
TUNE/SEARCH
MODE
MUTE
CD
TUNER
1.
3.
4.
MODE
+/A /ANT
–/B /VCR
DISP./RDS
F.DIRECT
ATT.
PTY
DISC/DECK
SYSTEM REMOTE CONTROLLER
RC5400SR
Press the PTY button in the TUNER MODE on
the remote controller. The current station’s
PTY will be displayed, or the currently
selected PTY group will be displayed in
blinking if no station or RDS data is present.
To change to a new PTY type, press the
TUNING or button on the front panel or
numeric buttons on the remote until the
desired PTY is shown in the display.
Once the desired PTY group or type has been
selected, press the PTY button while the
display blink (approx. 5 seconds). The PTY
Auto search will start, and the tuner will pause
at each station broadcasting RDS PTY
information corresponding to the selected
choice.
To advance to the next RDS station with the
desired PTY, press the PTY button again
within 5 seconds.
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
PROGRAMME TYPE (PTY) DISPLAY
The RDS system categorizes programmes
according to their genre into different programme
type (PTY) groups. To display the programme
type information of the current station, press the
PTY button in the TUNER MODE on the remote.
CHANNEL/SKIP
BASS
TREBLE
MODE
+/A /ANT
–/B /VCR
TUNE/SEARCH
DISP./RDS
F.DIRECT
ATT.
PTY
DISC/DECK
SYSTEM REMOTE CONTROLLER
RC5400SR
28
SR4400N DFU_01_ENG 2_2
Page 28
03.4.4, 9:25 AM
Adobe PageMaker 6.5J/PPC
DISPLAY
POP
ROCK
MOR
LIGHT
CLASSIC
NEWS
AFFAIR
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
OTHERS
OTHER
WEATHER
FINANCE
CHILDREN
SOCIAL
RELIGION
PHONE IN
TRAVEL
HOBBIES
JAZZ
COUNTRY
NATION
OLDIES
FOLK
DOCUMENT
PROGRAMME TYPE
Pop Music
Rock Music
M. O. R. Music
Light classical
Serious classical
News
Current Affairs
Information
Sport
Education
Drama
Culture
Science
Varied
Other Music
Weather
Finance
Children’s programmes
Social Affairs
Religion
Phone In
Travel
Hobbies
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Documentary
In case of trouble, check the following before
calling for service:
1. Are the connections made properly ?
2. Are you operating the unit properly following user’s guide ?
3. Are the power amplifiers and speaker working properly ?
SYMPTOM
SR4400 cannot be turned up.
Can not select CSII mode.
If the unit does not operate properly, check items shown in
the following table.
If your trouble cannot be recovered with the remedy actions
listed in the following table, malfunction of the internal
circuitry is suspected; immediately unplug the power cable
and contact your dealer, nearest Marantz distributor or the
Marantz Service Center in your country.
CAUSE
The power plug is not connected.
REMEDY
Connect the power plug to the outlet.
No sound and picture are Mute is on.
Cancel mute using the remote control unit.
output even when power is on.
The input cable is not connected See the connection diagram and connect the cables
correctly.
correctly.
The master volume control is turned all Adjust the master volume.
the way down.
The function selector position is wrong. Select correct position.
Speaker does not outputting The headphones are connected to the Disconnect the headphones. (Speakers will not
any sound.
headphone jack.
output sound when headphones are connected.)
Sound and pictures from other Input cable connected incorrectly.
than equipment selected with
the function selector.
Connect the cable correctly by referring to the
connection diagram.
Sound from the wrong channel Speaker cable connected incorrectly.
is output from the speaker.
Connect the cable correctly by referring to the
connection diagram.
No sound is output from the The center speaker cable connection is Connect the cable correctly.
center speaker.
incomplete.
S T E R E O h a s b e e n s e l e c t e d f o r When STEREO is selected for Surround mode, no
Surround mode.
sound will be output from the center speaker. Set
another Surround mode.
Center = NONE has been selected in Make the correct setting.
SETUP mode.
No sound is output from the The surround speaker cable connection Connect the cable correctly.
surround speakers.
is incomplete.
S T E R E O h a s b e e n s e l e c t e d f o r When STEREO has been selected for Surround
Surround mode.
mode, no sound will be output from the surround
speaker. Set another Surround mode.
CAUSE
REMEDY
Input signal is incompatible.
ENGLISH
SYMPTOM
TROUBLESHOOTING
Use PCM input signal or analog input signal.
No output to Sub Woofer Out. Sub-woofer = NONE has been selected Select Sub-woofer = YES.
in SETUP mode.
Noise is produced during DTS- Analog has been selected for input.
encoded CD or laser disc play.
Be sure to perform digital connection, select digital
input, then play.
A specific channel does not Nothing recorded on source.
produce output.
Check the encoded channel on the source side.
FM or AM reception fails.
Correctly connect the indoor FM and AM antennas to
FM and AM antenna outlets.
Antenna connection is incomplete.
Noise is heard during AM Reception is affected by other electrical Try changing location where the AM indoor antenna
reception.
fields.
is set up.
Noise is heard during FM The radio waves from the broadcasting Install an FM outdoor antenna.
reception.
station are weak.
C a n n o t g e t p r o g r a m m e d Preset data has been erased.
station when the PRESET
button is pressed.
Disconnecting power plug for long periods of time
will erase preset data. If that happens, input the
preset data again.
Control with the remote control Batteries are consumed.
Replace all the batteries with new ones.
unit fails.
Remote controller's function-key setting Select different position from which equipment will
is wrong.
be controlled.
The distance between this SR4400 and Move closer to this SR4400.
the remote commander is too far.
Something is blocking SR4400 and the Remove offending object.
remote commander.
GENERAL MALFUNCTION
If the equipment malfunctions, this may be
because an electrostatic discharge or AC line
interference has corrupted the information in the
equipment memory circuits. Therefore:
- disconnect the plug from the AC line supply
- after waiting at least three minutes, reconnect
the plug to the AC line supply
- re-attempt to operate the equipment
HOW TO RESET THE UNIT
AV SURROUND RECEIVER SR4400
SURROUND
DOWN
CLEAR
A/D
MEMORY
TUNING/PRESET
HT-EQ
F/P
S-DIRECT
MODE
DISPLAY
MUTE
STANDBY
POWER ON/STANDBY
PHONES
6.1
CH-IN
TV
DVD
VCR1
DSS/VCR2
CDR/MD
TAPE
CD
TUNER
Surround = NONE has been selected in Make the correct setting.
SETUP mode.
No sound is output from the The surround back speaker cable Connect the cable correctly.
surround back
connection is incomplete.
Surround mode is not EX/ES mode.
Set surround mode EX/ES.
Surround back = NONE has been Make the correct setting.
selected in SPEAKERS SIZE SETUP.
Can not select EX/ES mode.
Surround back = NONE has been Make the correct setting.
selected in SPEAKERS SIZE SETUP.
Input signal is incompatible.
Use 5.1channel source.
Can not select Pro Logic II Input signal is incompatible.
mode.
Use 2 channel Dolby Digital input signal, PCM input
signal or analog input signal.
Can not select Neo:6 mode.
Use PCM input signal or analog input signal.
SR4400N DFU_01_ENG 2_2
Input signal is incompatible.
Page 29
Memory backup
• In case a power outage occurs or the power
cord is accidentally unplugged, the SR4400
is equipped with a backup function to prevent
memory data such as the preset memory
from being erased.
Should the operation or display seem to be
abnormal, reset the unit with the following
procedure.
The SR4400 is turned on, press and hold the
CLEAR and MEMORY buttons simultaneously for
3 seconds or more.
Remember that the procedure will reset the
settings of the function selector, Surround mode,
delay time, TUNER PRESET etc., to their initial
settings.
29
03.4.4, 9:25 AM
Adobe PageMaker 6.5J/PPC
Television Format ................................................ NTSC/PAL
Input Level/Impedance .................................. 1 Vp-p/ 75 ohms
Output Level/Impedance ............................... 1 Vp-p/ 75 ohms
Video Frequency Response ............... 5 Hz to 8 MHz (– 1 dB)
Signal to Noise Ratio ..................................................... 60 dB
Power Output (20Hz – 20kHz / THD=0.08%)
Front L&R ...................................................... 8ohms
Center ...................................................... 8ohms
Surround L&R ............................................... 8ohms
Surround Back .............................................. 8ohms
80W/Ch
80W/Ch
80W/Ch
80W/Ch
Front L&R ...................................................... 6ohms 95W/Ch
Center ...................................................... 6ohms 95W/Ch
Surround L&R ................................................ 6ohms 95W/Ch
Surround Back ............................................... 6ohms 95W/Ch
Input Sensitivity/Impedance ...................... 360 mV/ 47 kohms
Signal to Noise Ratio (Analog Input/Source Direct) ....... 95 dB
Frequency Response
(Analog Input/Source Direct) ...................... 8Hz-70kHz(±3dB)
(Digital Input/96kHz PCM) ......................... 8Hz-45kHz(±3dB)
318 mm
ACCESSORIES
Remote Control Unit RC5400SR .......................................... 1
AAA-size batteries ................................................................ 2
FM Antenna .......................................................................... 1
AM Loop Antenna ................................................................. 1
AC Power Cord ..................................................................... 1
Registration Card .................................................................. 1
User Guide ............................................................................ 1
20 mm
AUDIO SECTION
Power Requirement ...................................... AC 230 V 50 Hz
Power Consumption ....................................................... 325W
Weight .................................................................... 12.5 Kg
440 mm
Specifications subject to change without prior
notice.
164 mm
Frequency Range ........................................... 531 - 1602 kHz
Signal to Noise Ratio ..................................................... 50 dB
Usable Sensitivity .......................................... Loop 500 µ V/m
Distortion ....................................... 400 Hz, 30 % Mod. 0.5 %
Selectivity ....................................................... ± 18 kHz 70 dB
GENERAL
150 mm
AM TUNER SECTION
27 mm
VIDEO SECTION
Frequency Range ....................................... 87.5 - 108.0 MHz
Usable Sensitivity .................................... IHF 1.8 µV/16.4 dBf
Signal to Noise Ratio .......................... Mono/Stereo 76/72 dB
DistortionMono/Stereo ....................... Mono/Stereo 0.2/0.3 %
Stereo Separation ............................................... 1 kHz 45 dB
Alternate Channel Selectivity ....................... ± 300 kHz 60 dB
Image Rejection ............................................... 98 MHz 70 dB
Tuner Output Level .................. 1 kHz, ± 40 kHz Dev800 mV
365 mm
FM TUNER SECTION
DIMENSION
14 mm
ENGLISH
TECHNICAL SPECIFICATIONS
30
SR4400N DFU_01_ENG 2_2
Page 30
03.4.4, 9:25 AM
Adobe PageMaker 6.5J/PPC
SETUP CODES
CD
Aiwa ............................................ 0151, 0184
Burmester .............................................. 0447
California Audio Labs .................. 0056, 0330
Carver ..................... 0184, 0206, 0326, 0464
DKK ....................................................... 0027
Denon .................................................... 0030
Emerson ............................................... 0332
Fisher .......................................... 0201, 0206
Garrard ........................................ 0420, 0447
Genexxa ...................................... 0059, 0332
Harman/Kardon ........................... 0184, 0200
Hitachi ................................................... 0059
JVC ....................................................... 0099
Kenwood ........................... 0055, 0064, 0217
Krell ....................................................... 0184
LXI ......................................................... 0332
Linn ....................................................... 0184
Luxman ........ 0062, 0120, 0293, 0354, 0355,
0457, 0459, 0510, 0516
MCS ..................................................... 0056
MTC ...................................................... 0447
Magnavox ................................... 0184, 0332
Marantz ........ 0056, 0184, 0207, 1207, 0999,
Mission .................................................. 0184
NAD ............... 0046, 0326, 0343, 0747, 0748
NSM ...................................................... 0184
Nakamichi ..... 0106, 0174, 0466, 0471, 0691
Nikko ..................................................... 0201
Onkyo .................................................... 0128
Optimus ........ 0027, 0059, 0064, 0172, 0206,
0332, 0447, 0464, 0495
Panasonic ................................... 0056, 0330
Parasound ............................................. 0447
Philips .................................................... 0184
Pioneer .................... 0059, 0271, 0332, 0495
Polk Audio ............................................. 0184
Proton .................................................... 0184
QED ...................................................... 0184
Quasar .................................................. 0056
RCA ..... 0059, 0080, 0206, 0332, 0495, 0791
Realistic ............................. 0206, 0207, 0447
Rotel ............................................ 0184, 0447
SAE ....................................................... 0184
Sansui ......................................... 0184, 0332
Sanyo .................................................... 0206
Panasonic ............................................. 0256
Philips .................................................... 0056
Pioneer .............................. 0054, 0126, 0247
Polk Audio ............................................. 0056
RCA ............................................. 0054, 0247
Samsung ..................................... 0418, 0419
Sansui ................................................... 0056
Sony .................................. 0197, 0270, 0318
Teac .............. 0307, 0335, 0336, 0418, 0419
Technics ................................................ 0256
Victor ..................................................... 0300
Wards .................................................... 0054
Yamaha ....................................... 0121, 0124
Scott ...................................................... 0332
Sears ..................................................... 0332
Sharp ........................................... 0064, 0207
Sherwood .............................................. 0207
Sonic Frontiers ...................................... 0184
Sony ............................................ 0027, 0212
Soundesign ........................................... 0172
Tascam ................................................. 0447
Teac ........................ 0201, 0207, 0420, 0447
Technics ...................................... 0056, 0330
Toshiba ....................................... 0046, 0326
Victor ..................................................... 0099
Wards .......................................... 0080, 0184
Yamaha ....................................... 0063, 0214
Yorx ....................................................... 0488
SAT (DSS)
AlphaStar .............................................. 0799
Echostar ...................................... 0802, 1032
Expressvu ............................................. 0802
General Instrument ........... 0388, 0654, 0896
HTS ....................................................... 0802
Hitachi ................................................... 0846
Hughes Network Systems ..................... 0776
JVC ....................................................... 0802
Jerrold ......................................... 0388, 0654
Magnavox .................................... 0749, 0751
Memorex ............................................... 0751
Next Level ............................................. 0896
Panasonic ............................................. 0728
Philips ................................ 0749, 0751, 1103
Primestar ..................................... 0388, 0654
RCA ......................... 0170, 0419, 0593, 0882
Radio Shack .......................................... 0896
Sony ...................................................... 0666
Star Choice ........................................... 0896
Toshiba ....................................... 0776, 0817
Uniden ......................................... 0749, 0751
Zenith .................................................... 0883
MD PLAYERS
Denon .................................................... 1900
Kenwood ..................................... 1708, 1853
Marantz ................................................. 1207
Onkyo .................................................... 1895
Optimus ................................................. 1090
Pioneer .................................................. 1090
Sharp ..................................................... 1888
Sherwood .............................................. 1094
Sony ...................................................... 1517
Yamaha ................................................. 1915
CDR
Marantz ................................................. 0999
TAPE
Aiwa ............................................ 0056, 0224
Carver ................................................... 0056
Denon .................................................... 0103
Garrard ........................................ 0335, 0336
Harman/Kardon ........................... 0056, 0209
JVC ............................................. 0271, 0300
Kenwood ............................................... 0097
Magnavox .............................................. 0056
Marantz ................................................. 0056
NAD ....................................................... 0171
Onkyo .......................................... 0162, 0309
Optimus ....................................... 0054, 0247
TV
AOC ............................................ 0046, 0057
Admiral ........................................ 0120, 0490
Aiko ....................................................... 0119
Akai ....................................................... 0057
Alaron .................................................... 0206
Ambassador .......................................... 0204
America Action ...................................... 0207
Anam ..................................................... 0207
i
SR4400N DFU_00_cover
Page 3
03.4.4, 9:03 AM
Adobe PageMaker 6.5J/PPC
Audiovox ................. 0119, 0207, 0478, 0650
Baysonic ................................................ 0207
Belcor .................................................... 0046
Bell & Howell ............................... 0043, 0181
Bradford ................................................ 0207
Brockwood ............................................ 0046
Broksonic .................................... 0263, 0490
CXC ....................................................... 0207
Candle ......................................... 0057, 0083
Carnivale ............................................... 0057
Carver ................................................... 0081
Celebrity ................................................ 0027
Cineral ......................................... 0119, 0478
Citizen ..................... 0057, 0083, 0087, 0119
Concerto ................................................ 0083
Contec ................................................... 0207
Craig ...................................................... 0207
Crosley .................................................. 0081
Crown .................................................... 0207
Curtis Mathes ......... 0043, 0057, 0074, 0078,
0081, 0083, 0087, 0120, 0172,
0181, 0193, 0478, 1174, 1374
Daewoo ......... 0046, 0119, 0478, 0650, 0651
Daytron .................................................. 0046
Denon .................................................... 0172
Dumont ........................................ 0044, 0046
Dwin ............................................ 0747, 0801
Electroband ........................................... 0027
Emerson ....... 0046, 0181, 0204, 0205, 0206,
0207, 0263, 0490, 0650, 0651
Envision ................................................. 0057
Fisher .................................................... 0181
Fujitsu .......................................... 0206, 0710
Funai ........................................... 0206, 0207
Futuretech ............................................. 0207
GE ...... 0074, 0078, 0120, 0205, 0478, 1174,
1374
Gibralter ............................ 0044, 0046, 0057
GoldStar .................. 0046, 0057, 0083, 0205
Gradiente .................................... 0080, 0083
Grunpy ........................................ 0206, 0207
Hallmark ................................................ 0205
Harley Davidson .................................... 0206
Harman/Kardon ..................................... 0081
Harvard ................................................. 0207
Hitachi ............................... 0043, 0083, 0172
Infinity .................................................... 0081
Inteq ...................................................... 0044
JBL ........................................................ 0081
JCB ....................................................... 0027
JVC ....................................................... 0080
KEC ....................................................... 0207
KTV ............................................. 0057, 0207
Kenwood ..................................... 0046, 0057
LG ......................................................... 0083
LXI ................. 0074, 0081, 0181, 0183, 0205
Logik ...................................................... 0043
Luxman ................................................. 0083
MGA ........................ 0046, 0057, 0177, 0205
MTC ........................ 0046, 0057, 0083, 0087
Magnavox ................ 0057, 0081, 0206, 1281
Majestic ................................................. 0043
Marantz ............................. 0057, 0081, 1581
Matsushita ............................................. 0277
Megatron ..................................... 0172, 0205
Memorex ...... 0043, 0083, 0177, 0181, 0205,
......................................... 0206, 0277, 0490
Midland .............................. 0044, 0074, 0078
Mitsubishi ................ 0046, 0120, 0177, 0205
Motorola ................................................ 0120
Multitech ................................................ 0207
NAD ................................... 0183, 0193, 0205
NEC ................................... 0046, 0057, 0083
NTC ....................................................... 0119
Nikko ................................. 0057, 0119, 0205
Onwa ..................................................... 0207
Optimus ............................. 0181, 0193, 0277
Optonica ...................................... 0120, 0192
Orion ................................. 0206, 0263, 0490
Panasonic ................................... 0078, 0277
Penney ......... 0046, 0057, 0074, 0078, 0083,
0087, 0183, 0205, 1374
Philco ............ 0046, 0057, 0081, 0172, 0490
Philips .................................................... 0081
Pilot ............................................. 0046, 0057
Pioneer ........................................ 0193, 0706
Portland ....................................... 0046, 0119
Prism ..................................................... 0078
Proscan ................................................. 0074
Proton .................................................... 0205
Pulsar .......................................... 0044, 0046
Quasar .............................. 0078, 0192, 0277
RCA .... 0046, 0074, 0078, 0117, 0120, 0706,
1074, 1174, 1274, 1374, 1474
Radio Shack ........... 0046, 0057, 0074, 0083,
0181, 0192, 0205, 0207
Realistic ........ 0046, 0057, 0083, 0181, 0192,
0205, 0207
Runco ................................ 0044, 0057, 0630
SSS ............................................. 0046, 0207
Audiovox ............................................... 0064
Beaumark .............................................. 0267
Bell & Howell ......................................... 0131
Broksonic ................ 0148, 0211, 0236, 0506
CCE ............................................. 0099, 0305
Calix ...................................................... 0064
Canon .................................................... 0062
Carver ................................................... 0108
Cineral ................................................... 0305
Citizen ......................................... 0064, 0305
Colt ........................................................ 0099
Craig ........................ 0064, 0074, 0099, 0267
Curtis Mathes .................... 0062, 0087, 0189
Cybernex ............................................... 0267
Daewoo ....................................... 0072, 0305
Denon .................................................... 0069
Dynatech ............................................... 0027
Electrohome .......................................... 0064
Electrophonic ........................................ 0064
Emerex .................................................. 0059
Emerson ...... 0027, 0064, 0070, 0148, 0211,
0236, 0305, 0506
Fisher .......................................... 0074, 0131
Fuji ........................................................ 0062
Funai ..................................................... 0027
GE ........................... 0062, 0075, 0087, 0267
Garrard .................................................. 0027
Go Video ............................................... 0459
GoldStar ................................................ 0064
Gradiente .............................................. 0027
HI-Q ....................................................... 0074
Harley Davidson .................................... 0027
Harman/Kardon ..................................... 0108
Harwood ................................................ 0099
Hitachi ......................................... 0027, 0069
Hughes Network Systems ..................... 0069
JVC ....................................................... 0094
KEC ............................................. 0064, 0305
KLH ....................................................... 0099
Kenwood ............................................... 0094
Kodak .......................................... 0062, 0064
LXI ......................................................... 0064
Lloyd’s ................................................... 0027
Logik ...................................................... 0099
MEI ........................................................ 0062
MGA ............................................ 0070, 0267
MGN Technology .................................. 0267
MTC ............................................ 0027, 0267
Magnasonic ........................................... 0305
Magnavox ................ 0027, 0062, 0066, 0108
Sampo ................................................... 0057
Samsung ....... 0046, 0057, 0083, 0087, 0205
Sansei ................................................... 0478
Sansui ................................................... 0490
Sanyo .................................................... 0181
Scimitsu ................................................. 0046
Scotch ................................................... 0205
Scott .............. 0046, 0205, 0206, 0207, 0263
Sears ............ 0074, 0081, 0083, 0181, 0183,
.................................................... 0205, 0206
Semivox ................................................ 0207
Semp ..................................................... 0183
Sharp ................................. 0120, 0192, 0715
Shogun .................................................. 0046
Signature ............................................... 0043
Sony ...................................................... 0027
Soundesign ....................... 0205, 0206, 0207
Starlite ................................................... 0207
Supreme ................................................ 0027
Sylvania ....................................... 0057, 0081
TMK ................................... 0083, 0204, 0205
TNCi ..................................................... 0 044
Tandy .................................................... 0120
Technics ...................................... 0078, 0277
Technol Ace .......................................... 0206
Techwood .................................... 0078, 0083
Teknika ..... 0043, 0046, 0081, 0083, 0087, 0119,
................................................. 0177, 0206, 0207
Telefunken ............................................ 0083
Toshiba ................... 0087, 0181, 0183, 1283
Vector Research ................................... 0057
Victor ..................................................... 0080
Vidikron ................................................. 0081
Vidtech ........................................ 0046, 0205
Wards ........... 0043, 0046, 0057, 0081, 0083,
.......................................... 0192, 0205, 0206
White Westinghouse ......... 0490, 0650, 0651
Yamaha ....................................... 0046, 0057
Zenith ............ 0043, 0044, 0119, 0490, 0651
VCR
Admiral ........................................ 0075, 0236
Adventura .............................................. 0027
Aiko ....................................................... 0305
Aiwa ............................................ 0027, 0064
America Action ...................................... 0305
American High ....................................... 0062
Asha ...................................................... 0267
Magnin .................................................. 0267
Marantz ............................. 0062, 0108, 1408
Marta ..................................................... 0064
Matsushita ................................... 0062, 0189
Memorex ...... 0027, 0062, 0064, 0066, 0074,
0075, 0131, 0189, 0236, 0267,
0506, 1064, 1189, 1289
Minolta ................................................... 0069
Mitsubishi .......................... 0070, 0075, 0094
Motorola ...................................... 0062, 0075
Multitech ...................................... 0027, 0099
NAD ....................................................... 0085
NEC ............................................. 0094, 0131
Nikko ..................................................... 0064
Noblex ................................................... 0267
Olympus ................................................ 0062
Optimus ........ 0064, 0075, 0085, 0131, 0189,
0459, 1075, 1089, 1189, 1289
Orion ................................. 0211, 0236, 0506
Panasonic .... 0062, 0189, 0252, 0643, 1089,
1189, 1289
Penney .................... 0062, 0064, 0069, 0267
Pentax ................................................... 0069
Philco ................................ 0062, 0236, 0506
Philips ............ 0062, 0108, 0645, 1108, 1208
Pilot ....................................................... 0064
Pioneer ....................................... 0085, 0094
Polk Audio ............................................. 0108
Profitronic .............................................. 0267
Proscan ................................................. 0087
Protec .................................................... 0099
Pulsar .................................................... 0066
Quasar .............................. 0062, 0189, 1189
RCA ..... 0062, 0069, 0075, 0085, 0087, 0267
Radio Shack ................................ 0027, 1064
Radix ..................................................... 0064
Randex .................................................. 0064
Realistic0027, 0062, 0064, 0074, 0075, 0131
ReplayTV .................................... 0641, 0643
Runco .................................................... 0066
STS ....................................................... 0069
Samsung ..................................... 0072, 0267
Sanky .......................................... 0066, 0075
Sansui ..................... 0027, 0094, 0236, 0506
Sanyo ................................ 0074, 0131, 0267
Scott ........................ 0070, 0072, 0148, 0211
Sears ... 0027, 0062, 0064, 0069, 0074, 0131
Semp ..................................................... 0072
Sharp ..................................................... 0075
Shintom ................................................. 0099
ii
SR4400N DFU_00_cover
Page 4
03.4.4, 9:03 AM
Adobe PageMaker 6.5J/PPC
Shogun .................................................. 0267
Singer .................................................... 0099
Sony ........................ 0027, 0059, 0062, 1059
Sylvania ................... 0027, 0062, 0070, 0108
Symphonic ............................................ 0027
TMK ....................................................... 0267
Teac ...................................................... 0027
Technics ...................................... 0062, 0189
Teknika .............................. 0027, 0062, 0064
Thomas ................................................. 0027
Tivo ....................................................... 0645
Toshiba ....................................... 0070, 0072
Totevision .................................... 0064, 0267
Unitech .................................................. 0267
Vector .................................................... 0072
Video Concepts ..................................... 0072
Videosonic ............................................ 0267
Wards ........... 0027, 0062, 0069, 0074, 0075,
0087, 0099, 0108, 0267
White Westinghouse ......... 0099, 0236, 0305
XR-1000 ............................ 0027, 0062, 0099
Zenith ...................... 0027, 0066, 0236, 0506
DVD
Aiwa ...................................................... 0668
Apex ...................................................... 0699
Denon .......................................... 0517, 0661
Fisher .................................................... 0697
GE ......................................................... 0549
Harman/Kardon ..................................... 0609
Hitachi ................................................... 0691
Hiteker ................................................... 0699
JVC ............................................. 0585, 0650
Kenwood ..................................... 0561, 0709
Magnavox .................................... 0530, 0702
Marantz ................................................. 0566
Mitsubishi .............................................. 0548
Onkyo .......................................... 0530, 0654
Optimus ................................................. 0598
Oritron ................................................... 0678
Panasonic ................................... 0517, 0659
Philips .......................................... 0530, 0566
Pioneer .............................. 0552, 0598, 0659
Proscan ................................................. 0549
RCA ............................................. 0549, 0598
Samsung ............................................... 0600
Sharp ..................................................... 0657
Sony ...................................................... 0560
Technics ................................................ 0517
Theta Digital .......................................... 0598
Toshiba ................................................. 0530
Yamaha ....................................... 0517, 0572
Zenith .......................................... 0530, 0618
iii
SR4400N DFU_00_cover
Page 5
03.4.4, 9:03 AM
Adobe PageMaker 6.5J/PPC
www.marantz.com
You can find your nearest authorized distributor or dealer on our website.
JAPAN
Marantz Japan, Inc.
35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan
U.S.A.
Marantz America, Inc.
1100 Maplewood Drive, Itasca, IL 60143, U.S.A.
EUROPE
Marantz Europe B.V.
P.O. Box 8744, 5605 LS Eindhoven, The Netherlands
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.
“DTS”, “DTS-ES Extended Surround” and “Neo:6” are trademarks of Digital Theater Systems, Inc.
is a registered trademark.
Printed in China
SR4400N DFU_00_cover
2002/05
Page 6
03.4.4, 9:03 AM
Adobe PageMaker 6.5J/PPC
MITi
26AW851310
Download PDF

advertising