PRO TEC TIVE HEAD WEAR

PROTECTIVE HEADWEAR
301
PROTECTIVE HEADWEAR
PROTECTIVE HEADWEAR
EUROPEAN STANDARDS FOR HEAD
PROTECTION
Safety and protective helmets are designed so that the energy developed
during an impact is absorbed by the partial destruction of the cap and the
harness. We draw users attention on the possible dangers when modifying
or doing away with one of the original elements of the helmet other than
those recommended by the manufacturer.
EN397: Protective helmets for industry
EN812: Shock-proof caps (anti-scalp)
EN 397 STANDARD: PROTECTIVE
HELMETS FOR INDUSTRY
The EN397 standard, which regards the "protective helmets for industry",
requires the following markings:
Each helmet must bear a moulded or printed marking featuring the
following indications:
•
•
•
•
•
the existing European standard number
the name or the manufacturer identification mark
date of the quarter and the year of manufacture
the helmet type
the size or size range.
Further indications, like instructions or recommendations of adjustment,
assembling, use, cleaning, disinfecting, maintenance, revision and storage,
are specified in the instructions for use.
EN 812 STANDARD: PROTECTIVE HELMETS
FOR INDUSTRY
The EN812 standard, regards the shock-proof caps (anti-scalp) of current
use, used in the industry, to protect head when it hits hard objects liable to
cause tearing up or other superficial injuries to the user or knock him out.
They are essentially intended for inside use.
302
A shock-proof cap is not intended to protect against the effects of falling
objects and must not under any case replace a protective industrial helmet
for this application according to the EN397 standard.
HELMET LIFETIME RECOMMENDATIONS
A safety helmet’s ‘safe to use’ age is dependent upon on a number of
variable factors that must be assessed by the user through a process
or careful monitoring and regular inspection prior to use. The date
clock located on the peak of a helmet shell is purely an indication of
when the shell was manufactured and does not accurately indicate
what time period a safety helmet remains safe to use.
The most important and relevant date to record in terms of safety is
the date of first use and this should always be written immediately
on the label provided in the back of the helmet. Polymers are
durable materials and only really begin to change their mechanical
properties when they are exposed to sunlight and industrial
hazards.
If left unused in conditions totally deficient of light, moisture and
extremes of temperature a helmet shell does not have a short shelf
life or short sell by date, infact its physical condition will not alter for
some period of time. A safety helmet’s lifetime is reduced by a
number of different factors:
• Impacts and abrasions
• Temperature extremes
• UV light exposure
• Molten metal splash
• Chemical exposure
• Electrical arc flash
PROTECTIVE HEADWEAR
N.B. Due to the nature of the high visibility colour pigments used in the
manufacturing process, high visibility helmet variants have a shorter lifespan than standard colour safety helmets. We recommend these colour
helmets are used for no longer than 12 months from the date of first use.
MAINTENANCE
Helmets should be inspected prior to each use for signs of deterioration or
damage, with defective parts replaced immediately. Helmets with
damaged shells, e.g.: with cracks, dents, excessive abrasion or severe
discolouration must be discarded. Regular cleaning using warm water and
mild detergent is likely to help extend the helmet’s lifetime. A brush can
be used to remove stubborn marks and dirt from the shell. Prior to washing,
the harness should be removed from the shell to facilitate cleaning. The
use of solvents, hot water, or harsh abrasives is not recommended.
DISPOSAL
USE OF ADHESIVE LABELS
Adhesive labels can attack the structure of all plastic materials over time.
Where labelling is a genuine necessity, we recommend the use of acrylic
or water based adhesives only. No solvent based labels or marker pens
should be applied.
WEARING ORIENTATION
Protector helmets are designed and tested to the requirements of EN397,
with clear guidelines that helmets must be worn in the correct orientation
with the peak at the front and the size adjustment mechanism at the rear.
A helmet’s heatgear should never be removed to reverse its orientation; if
this advice is ignored there can be no assurance that the helmet will meet
its certified performance. Applications that require a reduced peak can be
satisfied by specifying a different helmet with a reduced peak, which is ideal
for working in confined spaces or a height where greater vision is required.
PROTECTIVE HEADWEAR
As a manufacturer, it is almost impossible to predict exactly what effect
these combinations will have on a helmet’s ‘safe to use age’. Users must
regularly inspect and maintain their safety helmet and have an
appreciation of their work environment when determining when to replace
their safety helmet. We recommend a maximum in use lifetime of between
2 and 5 years from the date of first use. A safety helmet protects arguably
the most important organ in a human’s body and is relatively inexpensive
to replace, if pre-use inspection gives rise to any doubt discard and replace
immediately.
ACCESSORIES
Protector helmets are designed with a universal 30mm accessory slot to
enable the connection of a wide variety of face or hearing protection. The
Protector range includes a comprehensive portfolio of face protection,
passive and electronic hearing protection, sweatbands, chinstraps,
replacement headgear, hygiene and winter liners. Details of these
accessories are available in separate datasheets and can be provided by
JBS upon request.
HDPE belongs to polymers recycling category 7. Please see local authority
regulations for disposable advice and locations.
HELMET MARKINGS
Manufacturing Date:
EN50365 - Electrical Insulation:
EN397 stipulates display of year and quarter
of manufacture. There will be some
crossover for a period of time as to the exact
markings on helmets as we try to
standardise. Therefore old and new
markings are explained. The first logo
stipulates the rolling quarter of
manufacture, the second the year of
manufacture and currently the material type
also.
The twin triangle symbol together with ‘Class O’
denotes EN50365 approval. Suitable for use by
electricity workers up to 100Vac/1500Vdc.
Material type:
Helmet Model Label:
The flowing arrows and ‘7’ indicate a
recycling capability and category for a group
of polymers. HDPE indicates the material of
the helmet High Density Polyethylene.
An additional label is placed in the rear of helmets
to indicate optional approvals that are held under
EN397 for a specific helmet model, such as, -30oC,
MM - Molten Metal or 440V electrical approval. Date
of issue is marked to enable the user to record and
more accurately assess a helmet’s lifetime.
CE Marking:
Gost Approval:
Mandatory conformity mark for the
European Economic Area (EEA) - 0086 is the
unique number of the notified body (BSI)
that audits the quality systems.
Style 300 conforms to Russian GOST approvals.
VDE Electrical Approval:
(1000Vax/1500Vdc) VDE is the symbol of a well
recognised and trusted electrical certification body
based in Germany.
303
PROTECTIVE HEADWEAR
PROTECTIVE HEADWEAR
s
t
e
elm
h
r
u
o
y
d
n
Bra
BADGE IT SERVICE
Whether you require a pad printed, embroidered or
transfer printed logo on your head protection - leave
it to Centurion.
- No set up cost for a new logo
- One of the lowest minimum order quantities of 40
4 STEP GUIDE TO ORDERING WITH THE
JSP LOGO EXPRESSTM SERVICE
Most of our safety helmets come in several different colours. See the
details of each helmet type for what colours are available in the helmet
type you choose.
1. SELECT HELMET Choose your helmet and where you want your
logo printed, choose either front, back, sides or any combination of
the three.
2. SUPPLY ARTWORK Email artwork to logos@jsp.co.uk, preferably
Adobe Illustrator .ai or .eps files. Other file formats are accepted,
however these may incur additional set up charges and require more
time for the artworking involved.
3. APPROVE ARTWORK PROOFS JSP will email colour proofs, confirm
your order by emailing logos@jsp.co.uk. Alternatively state any
amendments that you require.
- One of the largest logo print areas
- We prefer to match to Pantone references (colour match
acceptable if Pantone not known)
- Most importantly, you are promoting your company for all to see
For details on print sizes and maximum passes please refer to
www.centurionsafety.co.uk.
HELMET PERSONALISATION
Approved and tested stickers for use on all Centurion helmets - you
can rest assured that these will not react or compromise the
performance of your safety helmet.
Simply supply us a list of names and font type in Word or Excel and
we will supply you with the stickers. Minimum order quantity of 40 stickers
(mixed names).
4. DELIVERY Delivery of printed helmets within 10 working days from
JSP’s receipt of the approved artwork.
NEW INDIVIDUAL BRANDING
We can now offer permanent individual helmet personalisation at a low
cost to further enhance identity and individuality to your head
protection.
NEW: JSP is pleased to offer this new revolutionary service thanks to our
new Printing Process. With the increased number of temporary workers
and the greater need for identification on work sites and in industrial
environments, JSP has researched and developed a new COST EFFECTIVE
Printing Process to fulfil today’s requirements.
304
SIMPLE: Choose the helmet you want and the position that you wish for
the individual printing to be done. Send an Excel Spreadsheet with
names or descriptions you want to mention on each helmet
(using the font you wish to be used). Each Helmet
supplied will be then printed with the
individual names supplied on the
Excel sheet, in black, with other
any other useful information
(contact number, ID number,
etc). Minimum Order
Quantity applies.
RETRO-REFLECTIVE STICKERS
In many outside working conditions wearing high-visibility clothes is
key to workers security.
The MSA stickers, available in 3 colours and
2 shapes, increase the visibility of the
wearer, especially when used in low
light conditions to increase the
contrasts.
PROTECTIVE HEADWEAR
PROTECTIVE HEADWEAR
6 POINT HARNESS SAFETY HELMET
6 point adjustable PE suspension harness. Good impact resistance
performance. Compatible with a range of accessories. Sweatband
for added comfort. One size fits all.
Conforms to: CE EN397
Product Codes: PHH03HD - White
PHH54HD - Red
PHH13HD - Blue
PHH12HD - Yellow
PHH22HD - Green
PHH67HD - Orange
Available Colours:
COMFORT PLUS HELMET
An all purpose helmet designed with safety and comfort in mind.
Shell manufactured from HDPE with integral rain channel for greater
comfort in poor weather. 4-point suspension terelyene harness. Slip
ratchet adjustable headband. International slot to accept
accessories.
Conforms to: EN397
Product Codes: PHH92HD - White
PHH116HD - Yellow
Available Colours:
SURVEYOR HELMET
BUMP CAP / SCALP PROTECTOR
Enhanced vertical viewing. Low dome profile Incorporates a rain channel.
Wheel ratchet or slip ratchet adjustable headband 6-point terylene
webbing Comfort Plus suspension harness or standard Polyethylene
harness options. Accepts Cliptite Accessories. Shell manufactured from
impact-resistant UV Stabilised high density Polyethylene. Helmet offers
440v electrical insulation.
Conforms to: EN397, ANSI Z89.
Product Codes:
PHH06HD
- White
PHH07HD
- Yellow with
wheel
adjustment
PHH07HDO - Orange
with wheel
adjustment
Lightweight polyethylene shell with polyethylene or terylene harness.
Polyethylene harnessed Bourton is ideal for use in the food processing
industry, being very easy to clean.
Conforms to: EN812
Product Codes:
PHH87HD
- Yellow
PHH122HD - White
PHH53HD
- Blue
Accessories:
PHH90HD
-Chinstrap
Available Colours:
Available Colours:
305
PROTECTIVE HEADWEAR
PROTECTIVE HEADWEAR
EVO 2® SAFETY HELMET
EVO2® features a traditional 6-point polyethylene harness and OneTouch™ slip
ratchet. The EVO2® offers the most economical top level protection. A micro peak
version is available on request. Tough HDPE shell: In tests the EVO2™ proved far
tougher than the EN397 standard required and far tougher than any of its
competitors. Harness: Traditional 6-point polyethylene harness. Chamlon™
Sweatband: Egyptian cotton core with porous PU coating for maximum sweat
absorption. PH neutral, dermatologically tested. 3D Precision Fitting: Never
before has such a precise fit been attainable on an industrial safety helmet, using
the unique 1-2-3 point harness depth settings. Adjustment: OneTouch™ Slip
Ratchet. Ventilation: Side and rear ventilation for optimum air movement inside
the shell, reducing helmet temperatures by an average 2-3°C. Universal Slots:
Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
Branding: Extra large area for logos on the front, sides, and rear.
Conforms to: EN397
Product Codes: PHH85HD - Blue
PHH168HD - White
PHH68HD - Orange
PHH191HD - Yellow
PHH55HD - Red
DHH42HD - Green
DHH33HD - Black
See Hearing Protection for Surefit Ear Defenders, page 360
Available Colours:
®
EVO 3 SAFETY HELMET
306
Vented, Standard Peak, One Touch™ Slip Ratchet & 3D Adjustment
System (EN397). The EVO3™ Comfort Plus™ helmet combines a
super strong shell for superior all day protection in the widest
range of environments, with the comfort benefits of the new
Evolution 3D Adjustment™ harness system. EVO3™ is a true
evolution of the long established MK2® and MK3® helmets, which
were first launched in the 1970s, the EVO3™ retains the JSP
signature styling while incorporating developments first seen in
the EVO8™. Packed full of the latest protection technology and
features such as the Evolution 3D Adjustment™ harness system,
Revolution™ Wheel Ratchet or the unique OneTouch™ Slip Ratchet,
which can be adjusted using one hand in a single swift movement.
Conforms to: EN397
Product Codes: PHH05HD - White
PHH23HD - White with wheel adjustment
PHH19HD - Yellow
PHH17HD - Yellow with wheel adjustment
PHH88HD - Green
PHH24HD - Blue
PHH62HD - Orange
PHH75HD - Red
Attachments: PVI36HD - Mesh 8 Inch Visor for use with Evo 3
See ‘Hearing Protection’ for Surefit Ear Defender.
Available Colours:
JSP MK7™ NON VENTED,
EASYJUST SLIP RATCHET &
RETRACTASPEC™ (EN397)
The JSP Mk7™ safety helmet is the ultimate in EN 397
head protection. All round head protection, protects
the head from every angle not just the magic circle
on the crown required for EN 397.
Suitable for: Construction, Engineering,
Manufacturing, Electrical Engineers, External
Telecoms.
Attachments: Universal slots enable firm
fitting of Surefit Contour™ ear defenders
and a range of Surefit™ safety visors.
Comfort: Extremely comfortable terylene webbing
moulds to the individual shape of the wearers head.
A rain channel directs rain away from wearers face.
Short Peak: Reduced peak available for better vision
whilst working at heights.
Adjustment: Easyjust™ slip ratchet.
Electrical Insulation: The MK7 helmet is now
available with the EN 50365 Class 0 10KV standard.
Retractaspec™ The helmet comes with integral visor.
Conforms to: EN166.1.F
Product Codes: PHH131HD
PHH146HD
PHH132HD
PHH151HD
PHH81HD
PROTECTIVE HEADWEAR
THE CLASSIC EN397
INDUSTRIAL SAFETY HELMET
- White
- Orange
- Yellow
- Green
- Red
Available Colours:
EVO8 EVOLUTION™
3X STRONGER THAN ANY OTHER INDUSTRIAL
SAFETY HELMET IN THE WORLD..... HEAD
PROTECTION HAS EVOLVED
Conforms to: EN14052
Product Codes: PHH153HD - White
PHH154HD - Blue
Available Colours:
The EVO8™ Safety Helmet is tested from more than double the height of
helmets that meet EN397. EN14052 also requires that the same helmet is
tested twice, once on the crown and once on either, the left or right side, front
or back. Together with the testing height of up to 2.5 metres, passing EN14052
means the Mk8 Evolution® is designed to withstand over 3 times the impact of
any EN397 helmet on the market. However, the EVO8™ doesn’t just meet the
new EN14052 standard, it exceeds it. No other safety helmet offers this level of
protection...
The Mk8 Evolution® is the only industrial safety helmet in the world meeting
and exceeding the new far tougher head protection standard, EN14052. The
EVO8™ took significant research and development and proved to be
a considerable challenge to create the right design, and to utilise
the right materials that would meet the extreme levels of
performance required. A huge amount of work around the
design and testing of different materials has been carried
out and we are extremely proud to be the only
manufacturer that has managed to develop a helmet
capable of passing EN14052.
307
PROTECTIVE HEADWEAR
PROTECTIVE HEADWEAR
MSA ORIGINAL V-GARD HELMET
The popular V-Gard features a high density polyethylene [HDPE] shell and a
textile suspension. It is compatible with the full range of MSA safety helmet
accessories and is available in high-visibility fluorescent orange, as well as
the standard range of colours. It is certified according to EN397, with the
following optional requirements: very low temperature [-30 °C], electrical
insulation [440 V AC].
Conforms to: EN397, EN50362, EN13463-1
Product Code: PHH182HD - White c/w Fas-Trac
A171M22042- Blue c/w Staz-On
A171J22016 - Green c/w Staz-On
A171M22041- Red c/w Staz-On
A171J22012 - White c/w Staz-On
A171M22040- Yellow c/w Staz-On
Available Colours:
MSA V-GARD 500 HELMET
The V-Gard 500 is a high quality helmet suited for various applications. It
features a high performance ABS shell [vented or non vented] with a rain
gutter, a textile suspension and is particularly suited for hearing
protection attachment. It is certified according to EN397, with the
following optional requirements: very low temperature [-30 °C], lateral
deformation [LD], electrical insulation [non vented version only - 440 V
AC], molten metal splash [MM].
Conforms to:
EN397, EN50365, EN13463-1
Product Code: A171M22036- White Non-Vented c/w Fas-Trac
A171J22033 - Green Non-Vented c/w Staz-On
A171J22030 - White Non-Vented c/w Staz-On
A171J22031 - Yellow Non-Vented c/w Staz-On
PHH223HD - White Vented c/w Staz-On
Available Colours:
MSA V-GARD 520 HELMET
The V-Gard 520 is the short peak version of the V-Gard 500, particularly
suited for high-angle and work at height applications. It features a high
performance, non vented ABS shell with a rain gutter and can
accommodate a specific 4-point chinstrap. It is certified according to
EN397, with the following optional requirements: very low temperature [30 °C], lateral deformation [LD], electrical insulation [440 V AC], molten
metal splash [MM].
Conforms to:
with Staz-On
308
with Fas-Trac Rachet
EN397, EN 50365, EN 13463-1
Product Code: A171M22043A171M22044A171M22045A171M22046A171J22008 -
Available Colours:
White Short Peak c/w Fas-Trac
Yellow Short Peak c/w Fas-Trac
Blue Short Peak c/w Staz-On
Green Short Peak c/w Staz-On
White Short Peak with Rain
Gutter c/w Staz-On
PROTECTIVE HEADWEAR
PROTECTIVE HEADWEAR
PELTOR G2000
The G2000/G2001 is an extremely high-class CE-marked hard hat
with effective shock absorption. Meets European standard EN
397 with approved extra requirements for lateral deformation
(lD), molten splash metal (MM) and low temperature (-30°C). In
addition the G2001 is approved to the requirements for electrical
insulation (440 vac). Colour(s): Green, Blue, Orange, Yellow, Red,
White. Harness: G2C, G2D. Material: UV stabilised. ABS Slot: P3E,
P3K. Weight: Approx. 340 g.
Conforms to: EN397
Product Codes: PHH16HD - Yellow
PHH31HD - Green
PHH50HD - Red
PHH56HD - White
PHH77HD - Blue
PHH133HD - Orange
For ear muff accessories please see page 315
*Note: Ear Muffs not included
Available Colours:
PELTOR G3000
The G3000 is developed in close collaboration with forestry
workers to meet stringent demands for more effective
protection, better ventilation and a wider field of vision. The
G3000 is produced in high quality UV-stabilised ABS-plastic and
it got top result for absorbing and distributing forces from fallen
objects. This helmet is one of the lightest safety helmets on the
market. The G3000 has more ventilation holes distributed over a
larger area than normal. Consequently G3000 offers a maximum
through flow of air without affecting the helmet’s strength.
To improve the field of vision, the G3000 helmet has been
designed with a shorter screen, without compromising on antidazzle and other properties. The G3000 helmet lining can be
turned 180 degrees (and it is CE-approved in this position) – a
big advantage for climbing and work in confined spaces.
Conforms to:
EN 397 with approved extra
requirements for electrical
insulation (440V), valid for G3001,
and low temperature (-30º C).
Product Codes: PHH208HD - Yellow
PHH123HD - Blue with rachet
PHH124HD - White with rachet
PHH126HD - Green
Available Colours:
309
PROTECTIVE HEADWEAR
PROTECTIVE HEADWEAR
CENTURION 1100 SAFETY HELMET
The 1100 is a general purpose safety helmet with a 6-point plastic cradle.
HDPE Shell. 6-Point Plastic Cradle. Compatible with CONNECT Face &
Hearing Accessories. Shell Material: High Density Polyethylene (HDPE).
Weight: 375g. Size: 51 - 63cm. Cradle: 6-Point Low Density Polyethylene
(LDPE). Peak: Full.
Conforms to: EN397 - Electrical Resistance 440V a.c.
Product Codes: DHH26HD - Yellow
DHH25HD - Blue
DHH29HD - Red
DHH34HD - White
DKK27HD - Green
DHH28HD - Orange
Available Colours:
CENTURION 1125 SAFETY HELMET
Available Colours:
The 1125 is a general purpose, well balanced safety helmet with a
Terylene cradle and a Brushed Nylon sweatband. HDPE Shell. Reduced or
Full Peak Choice. 6-Point Terylene Cradle with Brushed Nylon Sweatband.
Compatible with CONNECT Face & Hearing Accessories. Shell Material:
High Density Polyethylene (HDPE). Weight: 350g - 1125 Reduced Peak,
365g - 1125 Full Peak. Size: 51 - 63cm. Peak: Full & Reduced. Cradle: 6Point Sewn Terylene.Sweatband: Brushed Nylon.
Conforms to: EN397 - Electrical Resistance 440V a.c.
Product Code: 24H000018 - White Standard Peak
DHH11HD - Orange Standard Peak
DHH12HD - Blue Standard Peak
DHH09HD - Red Standard Peak
- Yellow Standard Peak
PHH08HD
DHH10HD - Green Standard Peak
24H00047 - White Short Peak
CENTURION CONCEPT SAFETY HELMET
310
Designed to take the weight off your shoulders. At only 300g, the
Concept safety helmet is 20% lighter than most other helmets, providing
the user with the lightest, strongest and most comfortable helmet
available. Manufactured from strong ABS material and provides added
side impact protection. Fitted with Terylene cradle and premium high
absorbent sweatband. Reduced and full peak option. Extended nape
providing increased neck protection. Optional unique ventilation system
provides added comfort due to increased airflow.
Conforms to: EN397
Product Code: DHH37HD - Blue Reduced Peak
PHH128HD - Yellow Reduced Peak
PHH14HD
- Yellow Full Peak
A175C05013 - Green Full Peak
PHH108HD - WhiteFull Peak
Available Colours:
PROTECTIVE HEADWEAR
A specialist version of the Concept safety helmet, this version is nonvented affording additional protection for adverse weather conditions. A
reduced peak helmet with high security head harness and quick release
chin strap. Manufactured from tough ABS material it is extremely
lightweight yet strong. Extended nape providing increased neck
protection. Uses the Centurion 6 point Terylene cradle and headband,
plus the new Hydro-Flock high absorbent sweatband. Compatible with
Connect Face and Hearing Accessories. Internal badge holder provided
for user identification / or medical data. Sizes : Adjustable 51-63cm.
Conforms to: EN397, EN50365, ANSI/ISEA Z89.1-2009 Type 1 Class E
Product Codes: DHH48HD - Yellow
PHH25HD - White
PHH120HD - Red
PHH209HD - Blue
DHH07HD - Chinstrap
Available Colours:
PROTECTIVE HEADWEAR
CENTURION CONCEPT – LINESMAN
SAFETY HELMET
CENTURION CONCEPT – ROOFER SAFETY
HELMET
A specialist version of the Concept safety helmet, this version has a ‘Push
and Turn’ premium ratchet headband for easy and quick adjustment.
Comes with ventilation and with reduced or full peak. Manufactured
from tough ABS material it is extremely lightweight yet strong. Extended
nape providing increased neck protection. Uses the Centurion 6 point
Terylene cradle and headband, plus the new Hydro-Flock high absorbent
sweatband. Compatible with Connect Face and Hearing Accessories.
Internal badge holder provided for user identification / or medical data.
Sizes : Adjustable 51-63cm.
Conforms to: EN397, EN50365
Product Codes: DHH32HD - Blue
DHH38HD - Yellow
PHH21HD - Orange
Available Colours:
HV HV
CENTURION VISION SAFETY HELMET
Available Colours:
HV
Premium Safety Helmet with Grade A Integrated Moulded Visor. The
Vision Plus offers the same head protection features as the well
established Vision helmet but now features a new moulded visor with the
additional benefits of: Grade A High Energy Impact Protection to EN 166:
providing the highest impact protection possible within EN 166 - better
than any other integrated eyewear on the market! Now including antiscratch and anti-mist coating for improved durability and visibility. The
new design continues to allow for prescription eyewear to be used
underneath it. Moulded design provides improved lower cheek coverage.
Large side pull tabs enable the wearer to quickly and easily move the
visor up and down even when wearing gloves. Optical clarity to Class 1
for continuous use - standard on all Centurion face protection.
Conforms to: Visor approved to EN166 1 A T, EN 170 2C-1,2
Helmet approved to EN397, -40°C, 1000V a.c, LD & MM
Product Codes: DHH23HD - White
DHH24HD - Blue
DHH30HD - Green
DHH60HD - Yellow
DHH61HD - Red
311
PROTECTIVE HEADWEAR
PROTECTIVE HEADWEAR
PROTECTOR ELITE 300 HELMET
The Protector Style 300 safety helmet is stylish and comfortable
and weighs just 310 grammes. Manufactured from high-density
polyethylene, the helmet has a choice of an eight point terylene
or plastic head gear. The helmet is very well balanced when
worn, maximising both comfort and protection for the wearer.
The distinctive contoured helmet shape has been specifically
designed to be used with hearing protection. Key Features:
Lightweight, extremely durable, comfortable and well balanced.
Conforms to: EN397
Product Codes: PHH78HD - White Unvented
PHH72HD - Blue Unvented
PHH74HD - Yellow Unvented
PHH86HD - Yellow Unvented with Sweatband
PHH200HD - Orange Vented
Available Colours:
HV HV
PROTECTOR STYLE 600 HELMET
312
Available Colours:
HV HV
The Protector Style 600 safety helmet has a unique combination
of safety, comfort and styling features, to ensure acceptance by
users in the most arduous head protection environments. The
Style 600 helmet range is available in a choice of ventilation
options and with the innovative HXSPEC retractable spectacle to
ensure eye protection is always available to the user.
Key Features: Innovative design. Integral spectacle option.
Unique ventilation option. Hearing protection interface.
Comfortable and well balanced. VDE approved to 1000 Vac
Polycarbonate version available for high heat applications
Compatibility with other Protective Equipment
The Protector Style 600 helmet has been specifically designed to
ensure compatibility with other types of Personal Protective
Equipment. Key features include: A unique scalloped headband
design at the sides of the helmet shell – Ensures good
compatibility with earmuffs and consistent earmuff
performance. The helmet accessory slot is compatible with
25mm and 30mm attachments – The Style 600 is designed to
accept a wide range of earmuffs. Specially designed visor
carriers have been developed – Ensures a good seal with the
helmet whilst minimising interference with hearing protection.
Conforms to: EN397
Product Codes: PHH96HD - Red Unvented
PHH73HD - White Unvented
PHH193HD - Yellow Vented
zero hoods
PROTECTIVE HEADWEAR
PROTECTIVE HEADWEAR
SCOTT SAFETY PROTECTOR ZERO HOODS
Protector Zero Hoods help maximise worker efficiency and safety in cold and wet weather conditions
by protecting against heat loss through the head; ensuring alertness in safety critical environments
where the use of head worn PPE is a pre-requisite. The Protector Zero hood range offers the capability
to connect to a wide range of safety helmets via a universal velcro strap attachment system or for
enhanced stability the HXZH high visibility versions offer a specific Protector safety helmet connection
where the helmet harness is mounted inside the liner so that the helmet harness remains directly in
touch with the head. HXZH/S - warm 40g Thinsulate® fleece, water and wind resistant nylon fabric with
inherent ‘rip stop’ durability.
Product Code: PHH30HD - HXZH/S Standard Warm 40g Thinsulate® fleece
PHH165HD - HXZH Hi Vis Yellow Thermal
WINTER LINER
Two Layers. 100% cotton will shell with fleece lining. Regular length. Colour: Shell - Navy, Lining - Red.
Cotton twill and binding are flame retardant until washed. Fleece lining and fasteners are flame
resistant. 2 internal ear pockets for use with HOT RODS tm. Velcro fastening chin strap.
Product Code: PHH188HD
V-GARD LINER KNIT CAP
Delivers extra warmth and protection under safety helmets. Stylish Skullie cap. Not attached to the
helmet, can be worn under any model of cap/hat. Perfect ear protection without obstructing vision.
100% high bulk acrylic, 12.5 mm thick.
Product Code: A171M22004
THERMAL NON FR ZERO HOOD
Thermal zero hood for cold weather. With cotton outer fabric, brushed cotton lining and knitted acrylic
collar. Colour: Grey. One size.
Conforms to:
EN342
Product Code: A070103013
FR THERMAL ZERO HOOD
Flame retardant zero hood for cold and wet weather. Removable and washable. Antiflame treated
cotton outer. Quality 100% cotton Colour: Red. One size.
Conforms to:
EN533
Product Code: A075103006
313
PROTECTIVE HEADWEAR
PROTECTIVE HEADWEAR
accessories
SUREFIT SAFETY
VISOR
The SurefitTM Safety Visor has been
designed with 2 point travel and
either springs firmly in place down
onto the peak of the helmet (both
standard peak and short peak), or
is sprung in its stand off position
raised conveniently out of the way.
Available in Polycarbonate,
Acetate and Forestry Mesh
formats.
Product Code: PVI55HD Polycarbonate Visor & Carrier
VISORS
Offers protection against low
energy high-speed particles at 45
m/s (101 mph) and liquid droplets.
Conforms to: EN166 1.F.3
Product Codes:
PVI04HD - Polycarb
PVI05HD - Acetate 20 cm
PVI60HD - Polycarb 17.5cm
INVINCIBLE®
YELLOW
BROWGUARD WIRE
GAUZE BOUND (8" /
20CM)
A browguard with aluminium
edged polycarbonate visor for
impact protection. Wheel ratchet
adjustable head harness.
Conforms to: EN166.1.B.3.9.
Product Code: DPS100HD
NEW AVENGER
DELUXE
BROWGUARD
314
Heavy duty industrial browguard
and visor with ratchet adjustable
head harness and integral
chinguard. Offers all round
protection to the face area and to
the sides including the temple
area.
Product Code: DBG02HD
INVINCIBLE®
POLYCARB FOR
CHINGUARD
UNBOUND (8" /
20CM)
Spare visor for Invincible
Browguards
Product Code: PVI40HD - Clear
Shade 5 (Dark) also available
VISOR HELMET
ATTACHMENTS
Visor carrier clips into ear defender
housing and fits both standard and
short peak helmets.
Product Code: PVI59HD - Surefit
Carriers for Visors
INVINCIBLE®
CLEAR CHIN AND
BROWGUARD
POLYCARB (8" / 20CM)
A browguard with aluminium
edged polycarbonate visor for
impact protection. Wheel ratchet
adjustable head harness.
Conforms to: EN166.1.B.3.9.
Product Codes:
PVI34HD - Complete
PVI50HD - Visor replacement
PVI39HD - Clear Chinguard
replacement (below)
ELASTICATED
CHIN STRAP
When fitted to JSP Industrial Safety
Helmets, meets the requirements of
EN397. When fitted to JSP Industrial
Bump Caps, meets the requirements
of EN812. Colour: Navy.
Product Code: PHH02HD
INVINCIBLE®
CLEAR CHIN GUARD
Replacement clear chinguard.
Product Code: PVI39HD
accessories
PROTECTIVE HEADWEAR
Description
Type
A150M22007
CHINGUARD CLEAR POLY VGARD 10115827 MSA
Chinguard
A171M22002
CHINSTRAP MSA WEBBING B0258213
Chinstrap
PHH194HD
CHINSTRAP VGARD ELASTIC BO259378
Chinstrap
PEM74HD
EAR MUFF ATTACHMENTS HELMET - LEFT/RIGHT WHITE SNR 20 MSA 10087430
Ear Muff
PEM72HD
EAR MUFF ATTACHMENTS HELMET - MSA 10087422 NRR 28DB - SNR 31 LEFT/RIGHT
Ear Muff
A171M22004
LINER ZERO HOOD WINTER TO SUIT MSA 10118417
Liner
A171M22013
SUSPENSION MSA FAS-TRAC ASSEMBLY 10109261
Suspension
A171M22003
SUSPENSION STAZON ASSEMBLY MSA 10109230
Suspension
HSB
SWEATBAND FOR MSA HELMETS - 10006280
Sweatband
A150M22014
VISOR CARRIER C/W ATTACHMENT NEW MSA 10121266
Visor
PVI09HD
VISOR CARRIER FOR VGARD HELMET 1006819
Visor
A150M22006
VISOR CLEAR POLY VGARD (CHINGUARD) 10115837 MSA
Visor
PVI01HD
VISOR FOR VGARD HELMET B128001
Visor
A150M22013
VISOR MSA 9" POLYCARBONATE 10115836
Visor
A150M22008
VISOR MSA CLEAR ACETATE LONG B 1280005
Visor
A150M22001
VISOR STOWAWAY CLEAR MSA 10002674
Visor
Code
Description
Type
PEM76HD
FL6U-28 CABLE EN352-1 EN352-4 EN352-6
Cable
A170P12001
CHINSTRAP PELTOR GH1 FOR USE W ITH G3000
Chinstrap
PHH76HD
CHINSTRAP GH1
Chinstrap
PHH79HD
CHINSTRAP GH2 BLACK SPECIAL CLIP
Chinstrap
PEP19HD
AEARO EAR CAP REPLACEMENT x 1 PAIR ES-01-300
Ear Cap
A161P12010
EAR DEFENDERS H520P3E CLIP ON PELTOR OPTIME II H520P3E
Ear Defenders
A161P12015
EAR DEFENDERS H540P3E CLIP ON PELTOR OPTIME III H540P3E
Ear Defenders
PEM01HD
EAR MUFF OPTIME I PELTOR HELMET MOUNT SNR30
Ear Muff
PEM03HD
EAR MUFF OPTIME I HELMET MNTED H510P3H SNR26 FOR CENTURION HELMET -405-GU
Ear Muff
PEM08HD
EAR MUFF OPTIME II HELMET MOUNTED H520-P3H-FOR CENTURION HELMET -410-GQ
Ear Muff
PEM11HD
EAR MUFF OPTIME III HELMET MTD H540P3H SNR34 FOR CENTURION HELMET -413-SV SNR 33
Ear Muff
PEM26HD
EAR MUFF OPTIME III H10PEK HELMET MOUNTED H540P3K-413-SV
Ear Muff
PEM44HD
EAR MUFF HELMET MOUNTED H31P3E PELTOR
Ear Muff
PEM50HD
LITE-COM III 446 MHZ HEADBAND EARMUFF MT53H7A440B
Ear Muff
PEM73HD
EAR MUFF 3M PELTOR WS WORKSTYLE COMMS MUFF BLUETOOTH MT16H21FWS5G-580SV
Ear Muff
PEM77HD
EAR MUFF HELMET ATTACHMENT OPTIME III HELMET H540P3G-413-SV
Ear Muff
PEM62HD
EAR MUFF HYGIENE KIT HY68 PELTOR FOR MT15H68FB-02
Hygiene Kit
A180JBS00005
OUTER LENS FOR SPEEDGLAS 9100 PACK OF 10 3M 526000
Lens
PVI71HD
LENS ASSEMBLY KIT 3M6898
Lens Kit
PNI01PC
NOISE INDICATOR 3M NI-100
Noise Indicator
BHH08HD
SWEATBAND FOR PELTOR HYG3
Sweatband
PHH94HD
SWEATBAND LEATHER PELTOR HYG3
Sweatband
DVI41HD
VISOR 3M 060-75-00P X 1
Visor
DVI42HD
VISOR POLYCARBONATE 3M V4FK
Visor
PVI13HD
VISOR ONLY POLYCARBONATE 4F PELTOR
Visor
PVI15HD
VISOR POLYCARBONATE V4F PELTOR COMPLETE KIT WITH ATTACHMENTS
Visor
PVI45HD
VISOR MESH PELTOR V4C
Visor
PVI46HD
VISOR LINKAGE KIT V412 PELTOR
Visor
PVI49HD
VISOR COVERS 3M H110 X 40 0270011P
Visor
PVI67HD
FACESHIELD M107 C/W COATED VISOR & FLAME RESISTANT FACE SEAL RESPIRATORY PROTECTIVE
Visor
PVI10HD
VISOR CARRIER V46 (PEAK)
Visor Carrier
A150P12020
VISOR KIT POLYCARB V4F 300 CLEAR 3M
Visor Kit
PROTECTIVE HEADWEAR
Code
315
PROTECTIVE HEADWEAR
PROTECTIVE HEADWEAR
316
accessories
Code
Description
Type
A156C05008
BROWGUARD CENTURION S89
Browguard
DVT13HD
CARRIER CENTURION FACE SCREEN S54
Carrier
DVI16HD
CARRIER SCREEN CENTURION S57
Carrier
A156C05013
CHINGUARD CENTURION S91C
Chinguard
PHH186HD
CHINSTRAP 4 POINT CENTURION LINESMAN S30Y
Chinstrap
DHH07HD
CHINSTRAP CENTURION S30E
Chinstrap
PEM58HD
EAR MUFF CENTURION AEGEAN S42C SNR30
Ear Muff
24A000075
EAR MUFF CENTURION HELMET MOUNTING CLIP SET FOR VISION HELMET CONNECT S575
Ear Muff
PEM47HD
EAR MUFF CENTURION S41V TO ATTACH TO VISION HELMET
Ear Muff
DEY01HD
EYESHIELD CENTURION RETRACTABLE S579
Eyeshield
PHH202HD
LINER HELMET FLEECE CENTURION NAVY S50FL X 5
Liner
PHH203HD
NECK CAPE HELMET CENTURION YELLOW HI VIS S51 X10
Neck Cape
DHH05HD
SWEATBAND CENTURION BRUSHED NYLON S31N
Sweatband
DVI17HD
VISOR CENTURION FACE SCREEN S598
Visor
DVT15HD
VISOR CENTURION POLY 170MM S580
Visor
DVT14HD
VISOR CENTURION POLY 225MM S590
Visor
DVT16HD
VISOR CENTURION POLYCARBONATE S910
Visor
Code
Description
Type
PHH83HD
CHINSTRAP 2 POINT FOR PROTECTOR HXCS40
Chinstrap
PHH155HD
CHINSTRAP 4 POINT C/W CHIN CUP
Chinstrap
PHH189HD
CHINSTRAP HELMET 2017589 SCOTT SAFETY X 10
Chinstrap
PEM25HD
EAR MUFF HELMET MOUNT ZONE 1 PROTECTOR SNR27 FORMERLY EC8
Ear Muff
PEM31HD
EAR MUFF HELMET MOUNT ZONE 3 PROTECTOR SNR32
Ear Muff
PEM60HD
EAR MUFF HELMET MOUNTED ZONE 2 Z2HME SNR29 FOR PROTECTOR
Ear Muff
PEM78HD
EAR MUFF HELMET MOUNTED ZONE 3 Z3HME FOR ELITE
Ear Muff
PEM41HD
EAR MUFF ZONE AM/FM RADIO ZFOCUSHBE SNR31
Ear Muff
PHH201HD
NECK CAPE FOR PROTECTOR HELMET HXCAPE
Neck Cape
BSB02HD
SWEATBAND FOR PROTECTOR HXSB40T
Sweatband
PHH28HD
SWEATBAND LEATHER HXSB40L
Sweatband
PVI65HD
PROTECTOR CARRIER F800 C/W INTEGRAL CHINGUARD
Visor
PVI66HD
VISOR PROTECTOR ACETATE FL800A
Visor
PHH59HD
VISOR CARRIER FOR PROTECTOR HP067/HP063 IC900Z
Visor
PVI103HD
VISOR CARRIER FORESTRY NYLON KF010
Visor
A152S16001
VISOR CARRIER INTERCHANGE H/B IB2000
Visor
PHH59HD
VISOR CARRIER IC900
Visor
PHH58HD
VISOR FOR PROTECTOR HP068/HP064/1 IV900PC POLYCARBONATE
Visor
PVI68HD
VISOR KIT FOR T2 HEAD TOP TEAR OFF KIT96/VP X 10
Visor
PHH57HD
VISOR MESH IV920NY FOR PROTECTOR
Visor
PVI83HD
VISOR NYLON MESH FORESTRY FMNY
Visor
PVI72HD
VISOR POLYCARBONATE 150mm CLEAR 1V902PC
Visor
PVI74HD
VISOR SCOTT SARI 5011647
Visor
PROTECTIVE HEADWEAR
Safe, practical, economical Integral visor fitting ensures extra protection
against chemicals. Economical replaceable visors available in
polycarbonate. The Clearways combination offers both strength and
durability. Light weight, it is comfortable enough to wear all day
Product Code: PVI35HD - Browguard only Clearways CB14
Elasticated Headband1002346
PVI24HD - Browguard only Clearways CB20 Rachet
Headband 1002341
PVI30HD - Visor only Clearways CV83P Clear
Polycarbonate 20mm 1002353
PVI37HD - Visor only Clearways CV84A Clear Acetate
200mm 102360
PROTECTIVE HEADWEAR
HONEYWELL CLEARWAYS BROWGUARDS
AND VISORS
BOLLE SPHERE FACESHIELD
Top of the range: protection and superior comfort. PC Visor adjustable
headgear and browguard. Ultra enveloping. 355 g.
Product Code: DVI09HD
FORESTRY HELMET
The popular Forestry Helmet – A combination helmet comprising of:
• Orange Helmet complete with visor carrier
• 20cm/8” Wire Gauze Visor and Ear Defenders
• 6-point suspension harness with fully adjustable slip ratchet
headband
Bound with Aluminium for added strength and durability complying to
EN 1731 ANZI Z87 Ear Defenders to protect the hearing offering an SNR
value of 27.
Conforms to: EN397, ANSI 289 20cm/8” Wire Gauze Visor
EN1731, ANSI Z87 Visor
EN352-3, Protects against large flying particles
Product Code: PHH44HD
317
PROTECTIVE HEADWEAR
PROTECTIVE HEADWEAR
3M PELTOR G3000C SOLARIS HELMET
The Peltor™ G3000 Solaris™ Helmet has been designed in close
collaboration with forestry and industrial workers. It is intended for use in
harsh environments with tough demands for effective protection,
excellent ventilation and a maximum field of vision. Uvicator™ Sensor:
the disc tells you when it’s time to replace your helmet. Softly rounded
design to reduce the risk of helmet parts snagging on branches etc.
Optimised ventilation with more ventilation holes than a conventional
ventilated helmet. Space for printing a logotype, brand name etc. Short
brim giving a broader field of vision. Lining that can be rotated 180
degrees allows the helmet to be worn back-to-front which is ideal, for
example, when working in tight spaces or climbing. The Peltor G3000C
Forestry Combination Helmet: Effective protection for the head, face and
hearing. Equipped with a visor for the best possible visibility.
Conforms to: EN397
Product Code: PHH65HD
PETZL PIXA 3 ATEX HEADTORCH
For close range work, moving around and long range vision. It uses two
LEDs separately and together, one for close range work and moving around,
one with a powerful spot for long range, or both together for maximum
light. ATEX (zone 2): CE0080, Ex II 3 GD, Ex nAnL IIB T4. HAZLOC: class I
Groups C & D div II, Class II Group G div. 30/40/50 Lumens (3 stage
switchable output). 15/30/55m beam. 12/6/3 hours duration. 160g
(including batteries). Chunky, easy to use rotary switch.
Product Code: PTH62PC
WORKER SAFETY - HARD HAT ID
Easily fitted to the exterior of each workers hard hat. Securely stores their
critical and potentially lifesaving ID information essential in the event of a
serious accident or medical emergency. Lightweight – Weighs less than
5 grams. Reflective – Features 3M Scotchlite reflective material, assisting
workers to be seen by others in low-light situations. 100% Waterproof –
Is very durable and can be worn in any weather conditions. Secure –
Security flap protects the workers information (ensures data protection).
Helmet Safe – Tested to ensure the Hard Hat ID not weaken or damage
the workers hard hat in any way. Cost Effective – A low cost solution to
provide a back-up & reinforce your existing on-site safety procedures.
Our “Worker Safety” Hard Hat ID (WSID-01) is very versatile and can also
be fitted to clothing and other work equipment such as a harness,
reflective vest etc. Very durable. This worker safety product is a perfect
solution to assist in the essential work of pro-active health & safety
officers in all helmet wearing industries.
318
*Customise this product to feature your company or club logo / message when
purchased in volume.
Product Code: PTG04PC
PROTECTIVE HEADWEAR
Sporty protective bump cap designed as a safeguard against
accidental bumping or scraping of the head. Protective baseball
cap style bump cap increases wearer acceptability. The Top Cap
is available in 8 stylish colours. The low dome profile of the cap
allows it to be worn with other JSP Safety Protection such as Ear
plugs, Spectacles, Goggles and Respiratory Masks. Fully
conforms to latest 2001 release of EN812 (Improved head
protection).
Conforms to: EN812
Product Codes: PHH49HD - Navy
DHT13HD - White
PHH139HD - Green
PHH49HDB - Royal Blue
PHH49HDO - Orange
PHH49HDR - Red
Available Colours:
PROTECTIVE HEADWEAR
STANDARD TOP CAP
WITH STANDARD PEAK
CENTURION CAP 2000
Cotton cover with Lycra for ease of fit/removal. Large crown
ventilation holes with 4 mesh grills. Easily adjustable via Velcro
rear strap. Corporate badging via embroidery or transfer print.
Shell Material: Acrylonitrile-Butadiene-Styrene (ABS). Cap
Material: Cotton with Lycra content. Weight: 180g. Size: 54 59cm. Adjustment method: Velcro strap with tuck-in strap
eyelet. Cradle: Foam shock absorbing central pad. Sweatband:
Interlining/foam incorporated in headband. Ventilation: Large
ventilation holes with mesh grills.
Conforms to: EN812
Product Code: DHH40HD - Black
Available Colours:
COOLCAP
The CoolCap is both a fashionable workwear item as well as
giving maximum comfort during prolonged use. The new
design cap is fitted over an ABS liner to provide lightweight
head protection where high impact resistance is not essential,
but where there is a risk of minor bumps or scrapes to the head.
Conforms to:
EN812:2001
Product Codes: DHH31HD - Navy
DHH35HD - Hi Vis Yellow
319
Available Colours:
HV
PROTECTIVE HEADWEAR
PROTECTIVE HEADWEAR
FIRST BASE 3 - BUMP PROTECTION CAP
The Protector® First Base 3 is the third generation of Scott Safety’s
pioneering baseball style bump protection cap, designed and
approved in accordance with EN812 including A1. FirstBase 3 has
been designed in partnership with some of the world’s leading
companies to deliver the perfect balance of comfort, protection
and style; promoting the highest degree of wearer acceptance.
The range encompasses a choice of three cap styles Classic,
Xtra and Elite, each offering different specifications to suit all
requirements.
Conforms to:
Product Code:
PHH01HV
PHH02HV
PHT38HD
PHT39HD
A172P28001
A172P28002
320
EN812
- High Vis Yellow
- High Vis Orange
- Green
- Red
- Navy Blue
- Black
Available Colours:
eye protection
321
eye protection
eye protection
european StandardS for GoGGLeS and
protectiVe faceSHieLdS
BaSic Standard
EN166 Specifications
EN167 Optical test methods
EN168 Test method other than optical
StandardS By uSe
EN169 Welding filters
EN170 Ultraviolet filters
EN171 Infrared filters
EN172 Solar protection filters for industrial use
EN175 Welding work equipment
EN207 Glasses for laser protection
EN208 Glasses for laser adjustment
EN379 Specification concerning welding filters
en166: perSonaL eye protection
aGainSt VariouS danGerS
322
The EN166 standard is applicable to all types of eye protection used
against various dangers liable to damage the eye or to alter the vision,
with the exception of radiation of nuclear origin, X rays, laser beams or
infrared rays given out by sources at low temperature. The specifications
of this standard are not applicable to eye protectors for which separate
and complete standards exist, such as anti - laser eye protection, all purpose solar spectacles, etc.... The eye protectors fitted with corrective
lenses are not excluded from the application field.
All manufacturers of safety eyewear are required to have their products
independently tested against a European standard. Firstly it is important
to remember that both the Frame and Lens are tested, therefore both
must include the CE symbol and the manufacturer’s logo. The CE marking
certifies that a product has met EU consumer safety, health or
environmental requirements.
frame Markings
The frame will usually be marked on the inside of both arms. All safety
frames must pass the European EN166 standard. This is a higher standard
that the US or Asian equivalent and can often be preceeded by BS which
is simply the direct British equivalent. If this is not stamped on the frame
then you best to steer clear. Next will be a numbers and/or letters which
indicate to what degree the frames passed the EN166 test within various
categories.
Shape or design of the frame to...
3 - protect against liquid droplets and splashes. This is usually only
found on goggles where a full seal is made around the eyes.
4 - protect against large dust particle over 5 microns in size.
5 - protect against dust and fine dust particles smaller than 5 microns.
Strength of the frame to...
S - withstand impacts against small objects travelling up to 12 meters
per second
F - withstand impacts against small objects travelling up to 45 meters
per second
B - withstand impacts against small objects travelling up to 120 meters
per second
eye protection
en169 Standard : ocuLar fiLterS for
weLdinG and reLated tecHniqueS.
The European standard EN169 covers the use of safety glasses for
welding and applies shade levels depending on the use. The EN169
standard ranges from shade 1.2 being the lightest, to 16 the darkest.
Anything from shade 8 or above requires a special welding face shield
which we currently do not have in our range.
As a rough guide, welding safety glasses can be used during gas / braze
welding but not high intensity arc welding. Anyone attempting to either
gas or arc weld should be properly trained and therefore know which
protective eyewear or face shield is suitable. If you are in any doubt ask a
professional or your health and safety supervisor. However, the EN169
stand does give some guidance as to which shade could be used for a
certain application but should be used only as a guide and treated with
discretion:
1.7 or 2 - suitable for a welder's assistant or people working within
close proximity to welding activities
3 - 5 - suitable for braze, bronze or oxyacetylene gas welding
5 - 7 - suitable for Oxy-cutting
8 - 16 - face masks suitable for arc welding
en175 Standard : equipMent for eye
and face protection durinG weLdinG
and aLLied proceSSeS.
eye protection
A - withstand impacts against small objects travelling up to 190 meters
per second
T - withstand impacts at extreme temperatures
Lens Markings
Unlike the frame, lenses can meet various safety standards including
EN166, 169, 170 & 172. For obvious reasons the manufacturers are not
required to print every standard on the lens but simply the degree to
which they meet the standard. Using the guide below you can determine
which standards they meet. Once again the manufacturers seal and the
CE mark are mandatory. In addition will be a degree of solar or UV
radiation protection, the optical quality and then the mechanical
strength.
radiation protection:
2UV Protection (EN170). The number 2 indicates the filter may
effect colour recognition
2C or 3 - UV Protection (EN170). The number 2C (previously 3) indicates
the filter allows good colour recognition
4Infrared Protection (EN171). i.e. protection from heat
5Solar Protection (EN172). i.e. 100% UV sunglare protection with no infrared (IR) protection
6Solar Protection (EN172). i.e. 100% UV sunglare protection with infrared (IR) protection
Lens Shading:
1.2 Allows more than 74.4% light transmission, but less than 100%
1.7 Allows more than 43.2% light transmission, but less than 58.1%
2.5 Allows more than 17.8% light transmission, but less than 29.1%
3.1 Allows more than 8.0% light transmission, but less than 17.8%
optical quality:
1Class 1 High optical, quality suitable for regular use. Refractive
power of ± 0.06 dioptres.
2Class 2 Medium optical, quality suitable for occasional use.
Refractive power of ± 0.12 dioptres
3Class 3 Low optical, quality suitable for exceptional use.
Refractive power of ± 0.25 dioptres
Strength of the lens to:
Fwithstand impacts against small objects travelling up to 45
meters per second
Bwithstand impacts against small objects travelling up to 120
meters per second
Awithstand impacts against small objects travelling up to 190
meters per second
Twithstand impacts at extreme temperatures
The EN175 standard specifies the safety requirements and test methods
relating to personal protective equipment used to protect the user's eyes
and face against harmful optical radiation and against other specific risks
due to normal welding processes, cutting processes or other related
techniques.
The EN175 standard specifies the protection, including ergonomic
aspects against different types of risks or dangers :
Radiation
Flammability
Mechanical Risks
Electrical risks.
The equipment is designed to adjust protective filters with or without
guard lenses or reinforcement, according to the recommendations of the
protective equipment manufacturer for welding operations, in
conformity with the EN166 and EN169 standards or with the EN379
standard.
eyewear audit
Honeywell Safety Products, in association with JBS are pleased to offer
our structured Eyewear Audit Service. This service is a detailed process
which undertakes to carry out a survey of selected work areas where eye
protection products are currently being used or potentially may be
required. All survey work is first agreed and documented with the
customer to include scope and agreed timescales. A full detailed report is
produced following the survey which details all findings and proposed
recommendations.
• Structured process carried out by Honeywell Safety Products
developed in conjunction with both the Distributor and End User
• The process clearly identifies the scope of the project in terms of
sites covered, timescales, objectives and responsibilities.
• At each site there is clear identification of influencing factors with
regard to eyewear –
- Employees
- Conditions (available light, operations, dust, etc)
- Hazards
• Report and further actions: Recommendations are made for each
workplace audited in context of the working environment,
employees and hazards. This includes , products, lens v light,
coatings, and all other influencing factors.
323
eye protection
Safety preScription
eyewear
SinGLe ViSion LenSeS:
Called single vision, these lenses feature one correction for a given
distance: myopia, hypermetropia and/or astigmatism. They are known
as single vision because the optical power is the same for the entire
lens.
BifocaL LenSeS:
Bifocal lenses are designed for people who require two corrections,
one for distance and one for near vision. The top part of the lens
corrects distance vision and the lower part corrects near vision.
proGreSSiVe or VarifocaL LenSeS:
Varifocal lenses do not have any visible lines so they are more
aesthetically appealing. The power gradually changes from the top to
the bottom of the lens. It is a more functional lens because the person
wearing this type of lens has “continuous” vision. It makes it possible
to focus on objects at variable distances whereas a bifocal lens only
allows clear vision at two given distances.
free forM LenSeS:
Available on a wide range of lenses, Digital Free Form technology
combines the highest level of visual performance with outstanding
style. It results from an improved inner part of the lens with a
significantly larger field of vision. This has been achieved by bringing
the optical surface of the eye closer, with progression and cylinder
correction on the inner surface of the lens. This manufacturing
process is a result of a reduction in peripheral distortion and an
improvement in the field of vision compared with standard
progressive lenses.
The result is a Digital Free Form lens based on the individual
requirements of the user without the need for additional eye tests or
specific opticians' instruments. Thanks to the new Digital Free Form
technology, 98% of users who have taken part in acceptance testing
have adopted these lenses very quickly.
preScription eyewear
proceSS
Step 1:
Fill in the prescription form that is issued to your company
Step 2:
Employee visits the optician for fitting and frame selection
Step 3:
Optician sends order from to supplier
Step 4:
Safety prescription glasses made to order then returned to
the option
Step 5:
Optician checks and fits the glasses
price incLudeS:
324
IT IS
typeS of correctiVe LenS
•
frame and prescription lenses
•
case, cleaning cloth and cord
•
anti-scratch coating on pc and cr39
•
technical data leaflet
•
certificate of compliance
•
optician service
ESSEN
TIAL TO
TAKE CAR
E
O F
Y O U R
E Y E S
LenS MateriaL
these three materials are available for all models in our range.
touGHened GLaSS:
This material is composed of sand and chemical elements that
constitute traditional glass. Its main properties are excellent optical
quality and good scratch resistance. Thus, nearly 92% of light is
transmitted by toughened glass. In addition to its high weight, its
main disadvantage lies in its low impact resistance and the fact that it
breaks into several small pieces that could damage the eye.
• Lens markings = 1S
• european standard en166
cr39:
This is a plastic resin. It is durable and plastic lenses are 50% lighter,
less likely to fog up and they absorb some ultraviolet rays. On the
other hand, they scratch easily and to prevent this an antiscratch
coating is required. At equal power, they are thicker than toughened
glass lenses. An anti-reflective coating is less effective here than on
glass lenses.
• Lens markings = 1S
• european standards en166 - en170 - en172
poLycarBonate:
The main feature of polycarbonate is its resistance to impact. This lens
is by far the most resistant of all. Polycarbonate is 10% thinner than
glass and 15% thinner than plastic. But it is a soft plastic and is
therefore easily scratched so an anti-scratch coating is applied as
standard. This material is particularly recommended for protection in
the workplace.
Polycarbonate provides the added advantage of absorbing all
ultraviolet rays up to 380 nm (99.99%).
• Lens markings = 1f
• european standards en166 - en170 - en172
eye protection
eye protection
cLear Safety SpectacLe
One piece curved style spectacle. Anti-scratch
polycarbonate lens and nylon arm.
conforms to: EN166
product code: pSp29Hd - Clear Lens
pSp169Hd - Amber Lens
Available Colours:
cLear Safety SpectacLe witH
arM adJuSt
Curved style one piece polycarbonate lens with impact and
scratch resistance. Nylon arms adjustable in length.
conforms to: EN166
product code: pSp159Hd - Clear
Available Colours:
wraparound Safety
SpectacLeS
Wraparound design gives greater degree of protection to
eyes than traditional safety spectacles and improves allaround vision. Curved style one piece polycarbonate lens
with impact & scratch resistance. Nylon arm adjustable in
length and lens inclination.
Clear - standard protection for normal environments.
Smoke - enhances vision by reducing glare in bright
environments. Yellow - enhances vision by maximising light
in dark environments.
conforms to: EN166
product code: pSp158Hd - Clear
Available Colours:
325
eye protection
1. Stay alert with less eye fatigue
Adjustable nose bridge keeps eyes
centered in lens for clearer optics
and reduced eye fatigue.
2. See clearly with less fogging
Vented, cushioned frame allows
optimum air circulation and
combined with the N certified
coating on both sides of the lens
reduces fogging.
3. Be more protected
atcheting temple hinges adjust
lens angle for greater protection
and reduced fogging
4. Be more secure
Proprietary temple design (patent
pending) adjusts temple tension
for personal comfort and security.
Temple inserts slide from front to
back for firmer fit, – or in opposite
direction for looser fit.
5. Be more comfortable
Soft, flexible material covers frame
components for comfortable,
secure fit.
6. ready for any condition
The Adaptec 4A+ lens coating on
both sides of the lens (K & N)
ensures excellent anti-fog, antistatic and scratch- resistant
properties.
one style. three sizes.
customized fit & performance.
temples micro-adjust for a
snug fit and all-day comfort
A proprietary temple design (patent
pending) allows workers to adjust
temple tension anytime, safely and
without removing eyewear. Workers
can adjust for personal preference or
task at hand – a firmer fit for active
work or a lighter fit for general wear.
326
Temple arm features a rigid insert that
slides to control pressure against the
had. Wearer can slide insert from front
to back for a firmer fit, or back to front
for a looser fit.
adjustable nose bridge
centers eyes to reduce fatigue
Self-adjusting nose pads
add to worker comfort
Three-position nose bridge is simple to
adjust and keeps eyes centered in the lens,
where optical clarity is best. Workers’ vision
is less strained so they experience less eye
fatigue, work more comfortably for longer
periods, and can more clearly see their
work.
Soft, flexible material allows each nose pad
to independently conform to the wearer’s
face, delivering greater comfort, contact,
and stability.
adjustable lens angle improves
safety and reduces fogging
Each temple hinge ratchets to seven
positions — 30° of custom
adjustability — so lens is angled for
both optimal eye protection
and ideal space
for air circulation.
product codes:
pSp162Hd - Clear Lens Narrow Frame
pSp163Hd - Clear Lens Regular Frame
pSp164Hd - Clear Lens Wide Frame
eye protection
eye protection
3M™ tora ™ protectiVe SpectacLeS
Contoured, wraparound clear polycarbonate anti-mist lens with integral
browguard ensures maximum eye coverage and optimum energy
absorption. Supplied with adjustable and detachable neck cord for
security and convenience.
conforms to: EN166 1.F and EN170
product codes: pSp02Hd - Clear Lens
pSp06Hd - Brown Lens
3M™ Virtua™ protectiVe SpectacLeS
Unisex styling. Large lens size. High wrap offers additional coverage.
Contoured temples for comfortable fit. Polycarbonate lens absorbs 99.9%
UV.
conforms to: EN166 and EN170
product code: pSp01Hd - Clear Lens
327
eye protection
eye protection
BoLLe SiLiuM Safety SpectacLeS
SILIUM subtly blends rigour, protection, material technicality and cuttingedge design. Non-slip TIPGRIP temples. Adjustable non-slip pads.
Coatings anti-scratch, anti-fog, anti-static. 160% flex temples.
34 g. Brass + TPR + TPE. Integral side shields.
conforms to: EN166 & EN170 (clear)
EN166 & EN172 (smoke)
product codes: pSp89Hd - Clear Lens
BSp07Hd - Smoke Lens
BoLLe Viper Safety SpectacLeS
Very sophisticated and slick design, the VIPER model means there is
almost no limit to its adaptability. Adjustable temples. Coatings antiscratch, anti-fog, anti-static (according to versions). Upper protection
Supplied with adjustable cord. 25 g. PC + Nylon. Integral side shields.
conforms to: EN166
product codes: a154B13023 - Amber Lens
a154B13021 - Clear Lens
a154B13020 - Smoke Lens
BoLLe axiS Safety SpectacLeS
Effective shield against shocks, yet its ultra-light design means you hardly
notice Axis, except for the feel of safety and well being. Non-slip TIPGRIP
temples. Adjustable non-slip bridge. Pivoting temples Coatings: antiscratch, anti-fog, anti-static (according to versions). Upper protection. 27
g. PC + TPR. Integral side shields. Contrast coating.
conforms to: EN166
product codes: BSp13Hd - Clear Lens
BSp09Hd - Smoke Lens
328
eye protection
eye protection
BoLLe Bandido Safety SpectacLeS
An economical model for authentic protection. Coatings: anti-scratch,
anti-fog, anti-static (according to versions). Panoramic vision. Very
pleasing price /quality ratio. Supplied with adjustable cord. 28 g. PC.
Integral side shields. ESP coating.
conforms to: EN166
product code: BSp18Hd - Clear Lens
BoLLe BL10 Safety SpectacLeS
Bolle BL10 is a lightweight wrap-around economy safety spectacle with
neck cord.
confoms to:
EN166 1F.
product codes: BSp21Hd - Smoke Lens
BSp10Hd - Clear Lens
BoLLe contour Safety SpectacLeS
21g of power: solidity, protection, design, comfort and lightless. non-slip
TIPGRIP temples. Non-slip bridge. Coatings anti-scratch, anti-fog, antistatic (according to versions). 21g. PC + Nylon + TPE. Integral side shields.
ESP coating. Supplied with microfibre pouch.
conforms to: EN166
product code: BSp20Hd - Clear Lens
329
eye protection
HoneyweLL a700 SerieS
Economical and stylish eye protection. Sport temples with soft temple tip pads for comfortable fit. Secure wraparound design. Polycarbonate, distortion-free, hardcoat lenses. Soft temple tip pads for a secure fit. Available
with scratch-resistant hardcoating or optional Fog-Ban anti-fog coating.
conforms to:
Category II, EN166, EN170 & EN172
product code:
pSp08Hd - Clear Lens
Available Options:
1015360
- Clear fog-ban anti-scratch lens
1015362
- TSR grey anti-scratch lens minimises outdoor sunlight and glare
1015351
- TRS grey fog-ban anti-scratch lens minimises outdoor sunlight and glare
1015441
- HDL yellow anti-scratch lens for enhanced contrast in low light conditions
1015400
- Blue mirror anti-scratch lens for outdoor use - reflects sunlight and glare.
HoneyweLL MiLLennia SpectacLeS
330
The best you've ever seen! Classic and simple in appearance but highly
sophisticated in design. Only Pulsafe Millennia offers you Sensitive
Tension Design and Parallel Vision Control. A balanced fit and a greater
visual comfort. A virtually weightless feel. Adjustable, breakaway
Flexicord retainer. Unique 9 base curved lens design. Lens Coating:
anti-scratch. Frame Colour: Black. Frame Material: Nylon.
conforms to: EN166, EN170, EN172, EN171 & EN169
product codes: pSp14Hd - Silver Mirror Lens
pSp37Hd - Clear Lens
HoneyweLL Hi-StyLe 6000
Lightweight spectacle with moulded plastic frame. An integral temple
wire provides side arm adjustment. It ensures an excellent comfort and
precise fit. Shade Len Colour: Clear. Lens Coating: Anti-scratch. Frame
Colour: Cobalt blue. Frame Material: Polyamide.
product code: dSp14Hd
eye protection
eye protection
uVex SkyLite Safety SpectacLeS
Lightweight sport-style design. Frosted side shields aid glare
protection. Lens inclination adjustment. Maximum UV
protection. Optical class 1 polycarbonate lens. Colour: metallic
red. Lens: grey sunglare, filter/UV 5-2,5, ultradura.
conforms to: EN1661F
product code: pSp38Hd
uVex Super otG
Lightweight cover spectacle with hinge and unrestricted lateral
vision. Protective covering thanks to flat base curve. Lens
inclination of 11° ensures good view downwards and provides
the wearer safeness from stumble-accidents. X-streamtechnology (XST) – flexible temple concept that adjusts to
different wearing situations, with or without prescription glasses.
Material: PA/TPU. Features: XST-Temple.
conforms to: EN166
product code: pSp64Hd
uVex SkyGuard Safety
SpectacLeS
The Uvex Skyguard NT safety spectacles have been improved to
provide all-round protection. Based on the existing uvex skylite
spectacle we have added a conceptually simple, injection
moulded TPU frame to significantly increase wearer protection
levels, trough minimising the risk of particle ingress. The flexible,
closed-pore soft components of the frame enables a customised,
individual fit and are easy to clean to promote long term use.
Comfortable, customised fit. 4-fold length adjustment. Flexible,
closed-pore soft frame component. Perfect all-round protection.
conforms to: EN166 1F 34 KN
product code: a151u09111 - Blue
uVex i-Vo Safety SpectacLeS
Uvex i-vo, the ‘eye-volution’ in protective eyewear. When it
comes to comfort and looks, i-vo does not compromise, making
these spectacles incredibly popular among wearers. They are not
only uncompromisingly safe but also excellent in terms of
comfort and design. This is guaranteed because of uvex’s duo
component technology, which ensures that the spectacles not
only tough, but also smart. Soft components around the
sensitive parts of the face (nose, forehead, ears) guarantee
permanent maximum comfort.
conforms to: EN166-F
product code: a151u09002 - Clear
331
eye protection
eye protection
uVex cyBric Safety SpectacLeS
Dynamic and sporty in a modern design. For people with spirit of
the times. With innovative lenses and side pieces. The four pads
of the quattroflex temple in the sensitive ear region ensure a
comfortable fit that doesn’t pinch. Spectacles with a large
protective area, a long field of vision, and winning looks. For
dynamic employees who work hard and expect more from their
safety spectacles than mere safety.
conforms to: EN166
product code: a151u09107 - Clear
uVex Skyper Safety SpectacLeS
Extremely lightweight and modern safety spectacle. Temple
inclination can be finely adjusted while temple length can be
individually set. The softness of the temples ensures a pressure-free
fit. Lens and frame made from extremely impact-resistant plastic.
Simple lens replacement. Spectacle provides top UV protection.
Frosted side shields provide additional protection against glare.
conforms to: EN166
product codes: pSp09Hd
Clear Lens Blue Frame
dSp32Hd
Clear Replacement Lens
pSp10Hd
Brown Lens
pSp20Hd
Amber Lens
a151u09027 Brown Replacement Lens
a151u09030 Brown Lens Black Frame
a151u09033 Clear Lens Black Frame
a151u09039 SX2 Brown Lens Black Frame
a151u09044 SX2 Amber Lens Blue Frame
a151u09047 SX” Clear Lens Blue Frame
Martcare® M9100 wraparound™
SpectacLe cLear LenS Hc
A wraparound traditional style eyeshield for wide vision and
complete protection. Moulded nose piece for added comfort.
Sideshields and adjustable arms with cord attachment point.
conforms to: EN166.1.
product code: pSp03Hd
protectiVe oVerSpecS
Good all round safety spectacle. Excellent value for money. Clear
Polycarbonate scratch lenses.
conforms to:
EN166.
product codes: pSp04Hd - Clear Lens
- Yellow Lens
Se14y
BSp19Hd - Green Lens
332
Available Colours:
goggles
eye protection
eye protection
ViStaMax Vnc21 GoGGLe
High Performance anti-fog goggles, suitable for most
very humid environments. No vent frame gives excellent
protection against large and fine dust particles as well as
droplets of liquids. The anti-fog performer - its high tech
styling allows the goggle to breathe through its unique
anti-fog twin lens system and thermal bridge with
aluminium condenser. Known for its innovative anti-fog
twin lens system, and the ability to be worn over
prescription spectacles. Ideal for very humid
atmospheres. Front lens is in acetate for resistance to
scratches and chemical products while the rear lens is in
polycarbonate for impact resistance.
conforms to: EN166, European Directives
89/686/EEC, ISO 9001/2000,
Optical Class I, Impact Grade B, 9,
K and N
product code: pSp19Hd
V-Maxx cHeMiStry GoGGLe
General use and protection against impact (45m/s).
Protection against fogging. A sporty style for increased
wearer acceptance 180° field of vision for distortion free
peripheral vision. Rotating strap attachments. It fits a
wide variety of workers and can be worn over
prescription eyewear and with half-mask respirators. The
strap attachment system provides easier use with hard
hats. It is made with a selection of various strap
materials. This does ensure suitability for all types of
environments (i.e. neoprene strap for use in chemical
industry). Special concept of indirect ventilation. It is
compliant with splash-resistance test.
conforms to: EN166 & EN175
product code: BGG06Hd
HoneyweLL Sp1000tM
Contemporary style that can be worn with temples or
headband. Provides protection against impact, sun,
wind, and debris. Ideal for high-particulate
environments such as grinding, chipping and sanding.
Soft, high-quality face cushioning and padded temple
tips offer all-day comfort. Highly adjustable flameresistant headband provides excellent fit.
conforms to: EN166, EN170 and EN172
product code: pSp142Hd - Grey Lens
pSp156Hd - Clear Lens
333
eye protection
eye protection
goggles
uVex uLtraSonic GoGGLe
Revolutionary goggle, exceptional wearer comfort due to duo
component technology the combining of two different materials
(hard/soft components) means that pressure never becomes a problem even after long periods of wear ergonomically designed lens ensures
unrestricted all round vision. Can be worn comfortably over most
prescription spectacles. The outstanding ventilation ensures a pleasant
interior environment, whilst protecting against splash and dust. Sunglare
lens versions available. Easy lens replacement maximum UV protection
highest optical quality lens - class 1, CE approved to EN166 1B349 -liquid
(chemical) splash, large dust particles, molten metals and solids
replacement lenses available.
conforms to: EN166 1B349.
product code: pGG07Hd
uVex uLtraViSion GoGGLe
Comfortable, ergonomically designed full vision goggles with
unrestricted side visibility provided by 180° panoramic lens. Soft face and
nose cushioning enables totally air-tight and pressure-free fit.
Exceptional wearer comfort guaranteed by unrivalled design. Broad and
fully adjustable headband. Sophisticated ventilation system and
optional anti-fog lens.
product code: pGG06Hd - Transparent/ Grey frame,
PC Supravison - HC/ AF lens coating
9301-105
pGG23Hd - Foam Surround 9301-626
3M™ faHrenHeit™ GoGGLe
Soft PVC crystal frame with a wide support area all around the face to
enhance comfort. Specially designed to fit with prescription glasses, dust
mask or respiratory half-mask. Aerodynamic shape with cylindrical lens
for 180° of distortion-free vision. The benefit of DX coating is a lens that
is anti-scratch, anti-mist, anti-static and has some resistance to chemical
attack.
conforms to: EN166:2001
product code: pGG04Hd
3M™ 2890 GoGGLeS
334
Non vented safety goggles with polycarbonate lens. With a modern slim
design, the 3M™ 2890 Safety Goggles combine performance, comfort
and style while providing the wearer with an excellent field of vision.
Available with polycarbonate or acetate lenses and either sealed or
indirect ventilation options. Replacement lenses available. Key features:
Multiple lens options: Strong polycarbonate lens with anti-scratch
coating for durability and anti-fog coating for extra convenience and
visual clarity. Acetate lens with anti-fog coating for extra convenience
and visual clarity. Both lenses offer Optical Class 1 for visual clarity.
Modern slim-line and lightweight design for an excellent fit. Easy-toadjust strap for stable and comfortable wear. Good fit with 3M half-mask
respirators
product codes: pGG05Hd
goggles
eye protection
eye protection
BoLLe BLaSt Safety GoGGLeS
With its ground breaking, aggressive design, the Blast goggle from Bollé
Safety offers the wearer the ultimate in fit, comfort, protection, vision and
style. The unique shape of the goggle ensures a perfect fit with all
respirators and with the face providing maximum comfort and
protection, it has also been designed to fit over prescription spectacles.
Fitted with a wide adjustable headband and an optical class 1 antiscratch and anti-fog polycarbonate lens the Blast goggle provides
protection against impact, chemicals, dust, gas and molten metal. Clear
anti scratch / anti fog PC lens, vented frame.
conforms to: EN166 1B3459 CE
BLV face SHieLd for BLaSt GoGGLeS
Bolle BLAST BLV Visor is a totally unique product which increases face
protection of the Bolle BLAST goggle. The EN 166 approved shield
attaches to the goggle and the combined unit provides the same
protection as a standard faceshield whilst having the additional benefits
of being lighter and offering greater eye protection due to the seal
provided by the goggle.
conforms to: EN166
product code: pGG26Hd - Goggle
BVi31Hd - Shield
BoLLe atoM Safety GoGGLeS
Compact, lightweight, ultra comfortable thanks to its TPR et flexible
frame, ATOM provides high protection. Double-combination: safety
goggle or faceshield with its visor. Thermo Plastic Rubber. Liquid
overflow chute. Anti-scratch, anti-fog coatings. Ball-pivot. With or without
foam (according to versions). Fits over prescription spectacles. Adjustable
Strap. Fits with respiratory half mask.
conforms to: EN170
product codes: pGG09Hd
BoLLe attack Safety GoGGLeS
With its patented design, the Attack goggle offers the wearer the
ultimate in fit, comfort and protection. The unique “comfort zone”
cushions the frame of the goggle against the face providing maximum
comfort and protection. Fitted with a wide adjustable headband and an
optical class 1 anti-scratch and anti-fog polycarbonate lens. The Attack
goggle provides protection against impact, chemicals, dust and molten
metal. Clear anti scratch / anti fog PC lens, sealed frame.
conforms to: EN166 1B349 CE
product code: BGG01Hd
BoLLe x90 SMaLL GoGGLe
Ideal for the smaller face. This small goggle offers comfort, protection
and design. Coatings: anti-scratch, anti-fog, anti-static adjustable large
strap ball-pivot. 62 g. PVC. Indirect ventilation.
product code: BSp01Hd
335
welding
eye protection
eye protection
weLder fLip GoGGLe
Alba Goggle. 50mm flip-up gas welding goggle complete with shade 5
UV/IR lenses and clear polycarbonate backing lenses. Please note the
colour of this product can be red or green depending on available stock.
conforms to: EN175
product code: pGG03Hd - Shade 5
weLderS GoGGLe
Gas welding shade 5 goggle.
conforms to: EN166.B.3.4, EN169 shade 5 and EN175
product code: pGG13Hd
*Blue Helmet not included
coBra™ weLdinG ViSor din 9-13'
weLdinG SpectacLeS
A twin lens wraparound spectacle with shade 5 UV/IR abrasion resistant
lenses and burgundy soft frame coating for comfort and fit.
conforms to: EN175 EN166.
product code: pSp44Hd
336
Engineered and built to exacting standards, the Cobra welding visor is
constructed to a very high specification from engineering grade nylon
66. Cobra has been designed with the user firmly in mind and has many
unique features, which not only increase user safety but comfort as well.
Comes with the added benefit of EN397 head protection.
conforms to: EN175, EN379 & EN397
product code: pVi18Hd
fiBreGLaSS HeadSHieLd (108 x 83mm
LenS)
fiBreGLaSS HeadSHieLd (108 x 83mm
LenS)
Industry standard fibreglass headshield for the welding professional.
108mm x 83mm lens. Supplied without lenses.
conforms to: EN166, EN169 & EN175
product code: pVi14Hd
Industry standard fibreglass headshield. 108mm x 83mm lens.
conforms to: EN166, EN169 & EN175
product code: pVi17Hd
goggles & accessories
eye protection
eye protection
Standard direct Vent GoGGLe
A compact and lightweight goggle. Tough Polycarbonate lens offers
high resistance to impact from flying particles. Vented body, Cost
effective, PVC frame. Polycarbonate lens.
conforms to: EN166.1.B.
product code: pGG01Hd
Standard indirect Vent GoGGLe
One piece multi purpose long life safety goggle. Made from PVC for
comfort. Soft, contoured wide faced area for a secure and comfort fit,
Anti Mist.
conforms to: EN166.1.F
product code: pGG02Hd
atLantic GoGGLe
The new deluxe anti-mist Atlantic wide angle goggle features a wide
elastic headband for improved comfort. Moulded-in ventilation for dust
liquid, molten metal and hot solid protection.
conforms to: EN166 - 1.B.3.4.9.
product code: pGG25Hd
3M™ peLtor™
SpectacLe poucH
Soft Microfibre Pouch for
Spectacle (11x19cm), which both
protects and cleans the lenses
when needed.
product code: pSp68Hd
neck cord
Neck Cord for glasses, with loops
on end.
product code: pSp92Hd
uVex BLack
Zipper SpectacLe
poucH
Reinforced zipper. Velcro belt
loops. Additional space for spare
lenses. Suitable for all Uvex
spectacles. Ensures spectacles
are protected when not in use.
product code: pSp18Hd
SpectacLe
retainer cord BLack
Black spectacle safety cord
giving added security and
convenience in the active work
environment.
product code: pep42Hd
for more face protection in relation to hard hats etc.,
please see protective Headwear section, pages 314 to 317
337
eye protection
eyecare
eye protection
uVex
MoiSt
cLeaninG
tiSSueS
100 moist silicon free
cleaning tissues.
Individually sealed
Suitable for all types
of lens. Supplied in
box of 100.
product code:
a151u09078
uVex
cLeaninG
SoLution
Dry silicone free
cleaning tissues.
Individually sealed.
Suitable for all
lenses.
Boxed in 450's.
product code:
pSp62Hd
Spectacle cleaning
solution suitable for non
mist & anti scratch
coatings.
500ml bottle.
product code:
pSp63Hd
uVex LenS cLeaninG
Station 9970-002
uVex LenS cLeaninG
Station 9990-000
BoLLe cLeaninG
Station B410
Complete unit includes:
• 2 x 9971 000 silicone free cleaning tissues
(approx 700 sheets) – suitable for all lenses.
• 1 x 9972 000 cleaning solution 0.5l –
suitable for all lenses.
• 1 x 9973 000 plastic pump for uvex cleaning
solution.
• Dimensions for cleaning stations: 9970-200
w 300mm l 480mm h 165mm
product code: pSp41Hd
Complete unit includes:
• Cleaning tissues non-abrasive & highly
absorbing.
• 1 x 16oz bottle of cleaning fluid (specially
designed for anti-fog and scratchresistant coatings).
• Mirror and Mounting screws.
• Dimensions: W 340mm x L 480mm x H
165mm
product code: pSp40Hd
Our lens cleaner fit to all type of lenses,
respecting the coatings. They are non toxic.
Carton cleaning station with 400 tissues and 150
ml anti-fog and anti-static lens cleaner, alcohol
and silicone free.
product code: BSp28Hd
B500
BoLLÉ cLeaninG SoLutionS
B100
B410
338
uVex
cLeaninG
tiSSueS
B200
B401
B402
B411
B412
B-Clean by Bollé Safety is a complete and efficient cleaning solutions range.
Alcohol and silicone free, its aqua formula guarantees a perfect cleaning and
protection for your glasses and goggles. B-clean products (except B200) are
certified by COLTS laboratory.
B100 - 100 cleaning premoistened tissues dispenser - Anti-bacteria- anti-refl
ective - anti-static
B500 - 500 cleaning premoistened tissues dispenser - Anti-bacteria- anti-refl
ective - anti-static
B410 - Carton cleaning station with 250ml Anti-bacteria- anti-reflective - antistatic lens cleaner + 400 multi-function dry cleaning tissues
B401 - 200 multi-function dry cleaning tissues
B402 - Anti-bacteria- anti-reflective - anti-static 500ml Lens cleaner
pSp168Hd - Anti-bacteria- anti-reflective - anti-static 250ml Lens cleaner
B412 - Anti-bacteria- anti-reflective - anti-static 50ml Lens cleaner
B200 - Anti-fog kit: 30ml anti-fog solution + microfi ber tissue included
B250 - Anti-fog Spray: 500ml anti-fog solution
HEARING PROTECTION
339
HEARING PROTECTION
HEARING PROTECTION
EUROPEAN STANDARDS FOR
HEARING PROTECTION
It is a proven fact that noise can have serious repercussions at
physiological and psychological levels. In effect, noise constitutes a
real pollution for everyone's health.
EN352 STANDARD: HEAD
FASTENERS AND EAR PLUGS
The EN352 European standard is divided into several parts. Every part
of the standard is applicable to specific types of protection :
• EN 352-1, EN352-2 and EN352-3 standards deal with safety
requirements and tests, respectively regarding head fasteners,
earplugs, and head fasteners fixed on protective industrial
helmets.
• These standards establish requirements in regards to the
manufacture, design and performances, test methods and the
instructions relating to the marking and
information intended for the users.
• These standards stipulate the provision of information relating to
head fasteners acoustic fading characteristics, measured in
conformity with EN 24869-1 : 1992 standard, and therefore specify
a minimal fading level necessary to establish their conformity with
the present specification.
Only hearing protection products with an appropriate certification
mark can be selected. All the hearing protectors bear the EC marking
required by the personal protective equipment directive.
340
In selecting hearing protection, it is imperative to acknowledge the
laws, regulations, uses and techniques. The preceeding criteria
underline the general points for consideration when selecting. For
further details concerning selection please refer to the European
standard EN458 : 1996 (Title : Auditory protection - Recommendations
for selection, use and maintenance).
RNR* - <85dB
You do not have to wear hearing
protection, but it must be made
available to all exposed persons.
RNR* - 83dB - 93dB
You are above the level, hearing protection is
compulsory.
RNR* - 87dB - 98dB
You are above the level, hearing protection is
compulsory. Ideal for high frequency noise.
RNR* - 94dB - 105dB
You are above the level, hearing protection is
compulsory. Ideal for high and medium frequency
noise.
RNR* - 95dB - 110dB
You are above the level, hearing protection is
compulsory. Ideal for all frequencies.
Please Note: RNR* Recommended Noise Rating
At noise levels above 95dB you will need to get an accurate noise assessment to
correctly select the product. Green and yellow marked products are not
suitable for use in low frequency noise.
Choosing the correct hearing protection for your needs can be difficult. You
need to ensure you provide the correct level of protection to ensure that
workers are not over-protected and that a suitable product is chosen. E.A.R. and
Peltor have devised this easy-to-use selection system that aids correct choice.
The system uses a simple, logically coloured classification to make the selection
process easy. Firstly find out what your noise level is, then look at the above
icons and establish which band (RNR) the noise level falls into. Take note of this
icon and choose from the products that have this symbol displayed alongside.
Care/Maintenance of Earplugs and Earmuffs
Single-Use Earplugs
Inspect Inspect prior to fitting, examine your earplugs for dirt, damage or extreme
hardness—discard immediately if compromised.
Discard For proper hygiene, discard Single-Use earplugs after use.
HEARING PROTECTION
Ensure optimal fit and protection through proper care and maintenance of your
earplugs and earmuffs!
Hygiene To maintain hygiene standards, Single-Use earplugs should be discarded at the end
of every shift.
Multiple-Use Earplugs
Inspect Prior to fitting, examine your earplugs for dirt, damage, deformation or extreme
hardness—discard immediately if compromised.
Clean
Wash Multiple-Use earplugs with mild soap and warm water only. Pat dry with a
towel and store in a case when not in use. Do not treat with any other substances, as
the earplugs may degrade and compromise use.
Hygiene With proper maintenance, Multiple-Use earplugs can last for 2-4 weeks.
Banded Earplugs
Inspect Prior to fitting, examine your earpods for dirt, damage or extreme hardness—
discard immediately if compromised.
Clean
Wash pods and bands with mild soap and warm water only. Pat dry with a towel.
Do not treat with any other substances, as the earpods may degrade and
compromise use.
Replace Replace pods every 2-4 weeks to ensure optimal protection and performance.
Earmuffs
Inspect Regularly examine earcups and ear cushions for cracks and leaks—discard if
earcups are visibly damaged or compromised. Replace ear cushions if damaged.
Clean
Wash earcups and ear cushions regularly with mild soap and water. They may not be
dipped into water. Do not treat with any other substances, as the ear cushions may
degrade and compromise use.
Replace As ear cushions and foam inserts can degrade over time, replace these every 6-8
months under normal wear, or every 3-4 months with heavy use or in
humid/extreme climates.
341
HEARING PROTECTION
SOUND LEVEL
METERS
3M™ NOISE INDICATOR
NI-100
3M™ SOUND DETECTOR
SD-200
The 3M Noise Indicator alerts users to
potentially dangerous noise levels, helping
identify areas where hearing protection
may need to be worn. Users simply clip the
Noise Indicator to a shirt or jacket; its LED
light delivers a clear indication when noise
levels exceed a potentially hazardous
threshold. The Noise Indicator’s small size
and lightweight design make it ideal for
workers in a variety of industries. With a
rechargeable battery that operates for up
to 200 hours between charges, it’s an
economical investment in your employee
hearing awareness program.
The 3M™ Sound Detector SD-200 is a
compact, lightweight sound level meter
designed to accurately measure workplace
noise levels. Green, yellow and red LEDs
flash the colour that corresponds to the
Optime Alert System, making it easy to
select the appropriate level of hearing
protection. The SD-200 offers an integrating
feature that computes the average sound
pressure level, allowing for more accurate
assessment of intermittent sound levels. The
user-friendly interface makes the SD-200
easy to operate. A rechargeable lithium
polymer battery helps lower the total cost of
ownership compared to other sound level
meters that use replaceable batteries.
Product Code: PNI07PC
Product Codes: PNI01PC
PNI01PCU - USB Cable
3M™ SOUNDPRO
The SoundPro SE/DL series provides advanced sound
level monitoring and comprehensive data analysis.
Available in Class 1 and Class 2 models, these
instruments feature large screen displays that enable
real-time frequency analysis, and data storing
capabilities that make it easy to post-process and
evaluate workplace noise levels. The aerodynamic
shape of the SoundPro is specifically designed to
minimize disturbance to the sound fields being
measured. From industrial and task noise sampling to
hearing conservation, the SoundPro SE/DL series
provides accuracy, ease-of-use and, if needed, data for
professional follow-through.
Product Code: PNI06PC
342
3M™ SOUND EXAMINER KIT SE401
The Sound Examiner SE-400 series of sound meters
are engineered to accurately measure noise levels in
highly variable environments. These advanced
instruments compute the average sound pressure
level (LEQ/LAVG) over the run time and feature userselectable data logging intervals, helping you to more
accurately assess occupational and environmental
noise levels. The Sound Examiner also features a
SoundPatrol portable printing capability which
provides hard copy documentation of measurement
results in the field. The SE-401 kit includes meter, Class
1 Microphone with Remote Option, 53-321 USB
power supply,53-575 USB cable 59-344 WS-7
windscreen, 56-990 calibrator adapter and 53-711
storage case.
Product Code: PNI08PC
disposable earplugs
HEARING PROTECTION
SNR
HEARING PROTECTION
3M™ FOAM EAR PLUG 1100
The comfortable foam plugs Uncorded version 3M™ 1100 are soft,
disposable, polyurethane foam earplugs offering excellent protection.
Soft polyurethane foam offers maximum wearer comfort. Smooth, dirtresistant surface. Tapered design fits most ear canals. Attenuation:
SNR=37dB, H=37dB, M=34dB, L=31dB. 500 Pairs Refill.
Conforms to: EN352-2
Product Code: DEP01HD
37dB
3M™ E-A-RSOFT™ YELLOW
NEON EARPLUGS
3M™ E-A-RSoft™ Yellow Neon Refill Bag for use with the
3M™ One-Touch™ Dispenser. The 3M™ E-A-R™ E-A-RSoft™
Yellow Neon Earplugs are made from a slow expanding polyurethane foam
material. A plug that gives evenly distributed pressure allowing flexibility
and a good seal with optimum comfort. Attenuation: SNR=36dB, H=34dB,
M=34dB, L=31dB
Conforms to: EN352-2
Product Code: DEP05HD - 500 Pairs Refill Uncorded
DEP07HD - 250 Pairs Uncorded
A163A06003 - 200 Pairs UnCorded
SNR
36dB
EAR CLASSIC
The E-A-R® Yellow colour is your assurance of proven protection. Moisture
resistant dermatologically safe foam is not irritating. Slow recovery PVC
foam provides comfort with low pressure.
Conforms to: EN352-2
Product Code: PEP05HD - SNR 28db, box of 250
PEP73HD - SNR 36db, box of 200
PEP74HD - Push-ins SNR38db, box of 100
SNR
28dB
SNR SNR
36dB 38dB
MAX EARPLUGS
Patented "no-roll" design is easy to handle and fit. Contoured shape
comfortably matches contours of the ear canal. Available in uncorded
and corded. 200 pairs per box of uncorded. 100 pairs per box of corded
(polybag). SNR = 34db.
Conforms to: EN352-2
Product Code: PEP01HD - Uncorded - 200 per box
PEP02HD - Corded - 100 per box
SNR
34dB
343
HEARING PROTECTION
HEARING PROTECTION
disposable earplugs
LASER LITE SINGLE-USE EARPLUG
Vibrant colors make protection visible. Self-adjusting polyurethane foam
expands to fit virtually every wearer. Contoured T-shape for easy insertion
and wear. Smooth, soil-resistant closed cell-foam skin prevents dirt buildup. Attenuation Data: SNR(dB) 25. . 200 Pairs Uncorded.
Conforms to: EN352-2:1993 and EN24869-1:1993
Product Code: PEP22HD
SNR
25dB
BILSOM 303S FOAMPLUG REFILL
Polyurethane Foam delivers superior long-wearing comfort and solid
performance. Smooth, soil-resistant skin prevents dirt or other
substances from accumulating on skin or entering ear canal. Attenuation
Data: SNR(dB) 33, H(dB) 32, M(dB) 29, L(dB), 29. Refill 200 Pairs.
Conforms to: EN352-2
Product Code: DEP25HD
SNR
33dB
MAX® 500 - DISPOSABLE EARPLUGS
The world's most used polyurethane earplug. Bell shape delivers
maximum in-ear comfort. Improved design easier to insert, resists
tendency to back-out of ear canal. SNR = 34db.
Conforms to:
EN352-2
Product Codes: PEP16HD
PEP38HD
- Max Lite (500)
- Max Lite Red refill box (500)
SNR
34dB
MOLDEX MELLOW DISPOSABLE EAR PLUG
Protection against lower noise levels. Keeps you in touch with your
environmment. They're also ideal sleeping earplugs. Available in either
boxes or the Moldex Hygienic Dispensing system. SNR = 22dB.
Conforms to: EN352-2
Product Code: BEP14HD
344
SNR
22dB
disposable earplugs
HEARING PROTECTION
Extremely comfortable earplugs. Anatomical shape that adapts to the ear
canal. Available in two sizes. Made of soft PU-foam. Available in either
boxes or the Moldex Hygienic Dispensing system. SNR = 35dB
Conforms to: EN352-2:2002
Product Code: PEP23HD - Uncorded x 200
SNR
HEARING PROTECTION
MOLDEX CONTOURS® EARPLUGS
35dB
MOLDEX SPARK PLUGS® EARPLUGS
Appealing colours, tapered design. Made of soft PU-foam. Packed in
pairs. Also available corded. Also available in the handy PocketPak
container [2 pairs]. Also available in blister packs [5 pairs and a
PocketPak]. Also available in the hygienic dispenser system
MoldexStation. SNR = 35dB.
Conforms to: EN352-2:2002
Product Code: PEP03HD - Uncorded x 200
A165M19004 - Dispenser with 500 pairs
SNR
35dB
MOLDEX PURA-FIT® EARPLUGS
Earplugs for protection against higher noise levels. Made of soft
PU-foam. Packed in pairs. Also available corded. SNR: 36dB
Conforms to: EN352-2:2002
Product Code: BEP04HD
PURA-FIT® TO GO
Practical size - Contains 50 Pairs of Pura-Fit Earplugs. Resealable tub:
portable and hygienic. Appealing retail packaging. Keeps Plugs Hygienic
between use.
Product Code: PEP71HD
SNR
36dB
B-BRAND EAR PLUGS (BOX OF 200)
Disposable Ear Plugs. Founded to be in conformity with council directive
89/686/EEC relating to PPE. SNR = 37db. Nominal Size Range: 6 - 12. Box
of 200.
Conforms to
EN352-2
Product Code: BBEP - Uncorded
SNR
37dB
345
HEARING PROTECTION
HEARING PROTECTION
disposable & reusable earplugs
3M™ NO-TOUCH™ EARPLUGS
The 3M™ No-Touch™ Earplugs are easy to use and are shaped and ready for
immediate use. No roll down is required, just grab the bright yellow stem
for a firm and hygienic insertion. Only available corded. Attenuation:
SNR=35dB, H=35dB, M=32dB, L=30dB. Box of 100.
Product Code: DEP13HD
SNR
35dB
EAR CLASSIC CABOCORD
The E-A-R Cabocord is manufactured from a moisture resistant and
dermatologically safe foam which is not irritating. Slow recovery PVC
foam provides comfort with low pressure . SNR = 29dB. Box of 200.
Conforms to: EN352-2
Product Code: PEP06HD
SNR
29dB
BILSOM 304L FOAMPLUG (CORDED)
Polyurethane Foam delivers superior long-wearing comfort and solid
performance. Smooth, soil-resistant skin prevents dirt or other
substances from accumulating on skin or entering ear canal. Attenuation
Data: SNR(dB) 33, H(dB) 32, M(dB) 29, L(dB), 29. 100 Pairs.
Conforms to: EN352-2
Product Code: PEP11HD
SNR
33dB
B-BRAND CORDED EAR PLUGS
Corded foam disposable ear plugs. Founded to be in conformity with
council directive 89/686/EEC relating to PPE. SNR = 37db. Nominal Size
Range 6 - 12. Box of 200.
Conforms to: EN352-2
Product Code: BBCEP
346
SNR
37dB
reusable earplugs
HEARING PROTECTION
HEARING PROTECTION
SMARTFIT EARPLUGS (UNCORDED)
Thermoplastic Elastomer (TPE) adapts plug to the contours of the ear
canal for a more personalized fit, feels better the longer you wear it. Flat
Fin Seal creates better seal, more comfortable inside the ear canal.
Detachable cord allowed for corded or uncorded wear choice. Hearpack
storage case. Attenuation Data: SNR(dB) 30, H(dB) 32, M(dB) 27, L(dB), 23.
50 pairs.
Conforms to: EN352-2
Product Code: PEP64HD
SNR
30dB
MOLDEX COMETS REUSABLE EARPLUGS
Protection against lower noise levels. Keeps you in touch with your
environmment. Reusable. Washable. Easy to insert. Comes with a handy
PocketPak to store your plugs. Also available with a cord. SNR 25dB
Conforms to: EN352-2:2002
Product Code: PEP32HD - Uncorded,
PEP43HD - Corded
SNR
25dB
QUIET® REUSABLE EARPLUGS
Patented "no-roll" design is easy to handle and fit. Contoured shape
comfortably matches contours of the ear canal. Built-in insertion stem.
Quiet® - Corded Flip-top box. 100 pairs per box. NRR26 Class. SNR = 28dB
Product Code: PEP08HD
SNR
28dB
347
HEARING PROTECTION
HEARING PROTECTION
reusable earplugs
3M™ E-A-R™ ULTRAFIT™
14 UF-01-015 EARPLUGS
Low attenuation resuable earplug made from silicone rubber. The 3M™ EA-R™ Ultrafit™ 14 earplug uses unique filter technology to take the edge off
low levels of harmful noise whilst allowing normal conversations or
listening to broadcast music. It is moisture resistant, reusable and comes
with a cord. Attenuation: SNR=14dB, H=22dB, M=10dB, L=5dB.
Conforms to: EN352-2
Product Code: PEP30HD
SNR
14dB
3M™ E-A-R™ ULTRAFIT™
20 UF-01-012 EARPLUGS
The 3M™ E-A-R™ Ultrafit™ 20 Earplug is ideal in lower noise levels. Correctly
matched to the noise level it allows conversation and background music to
be heard whilst helping to protect the user from hearing loss. The 3M™ E-AR™ Ultrafit™ 20 earplug is moisture resistant, reusable and comes with a
cord. Attenuation: SNR=20dB, H=25dB, M=17dB, L=10dB.
Conforms to: EN352-2
Product Code: PEP31HD
SNR
20dB
3M™ E-A-R™ ULTRAFIT™
EARPLUGS
The 3M™ E-A-R™ Ultrafit™ are unique one size earplugs
which fits most ear canals comfortably and provides a high level of
attenuation. For occasions when the convenience and the permanence of a
premoulded earplug is more suitable for your requirements. Made from
flexible materials that are preformed to fit the ear. This reusable plug is
comfortable, hygienic and economical as it can be washed. Attenuation:
SNR=32dB, H=33dB, M=28dB, L=25dB. Box of 50.
Conforms to: EN352-2
Product Code: PEP27HD
SNR
32dB
3M™ E-A-R™ TRACER™
EARPLUGS
The unique one size 3M™ Tracer™ Earplug fits most ear
canals comfortably and provides high levels of attenuation with the added
benefits of being metal detectable. The reusable earplug incorporates a
blue metal detectable cord which makes it ideal for the food
manufacturing industry, also moisture resistant and comes with a cord.
Attenuation: SNR=32dB, H=33dB, M=28dB, L=25dB. Box of 50.
Conforms to: EN352-2
Product Code: PEP65HD
348
SNR
32dB
banded earplugs
HEARING PROTECTION
SNR
HEARING PROTECTION
3M™ E-A-R™ 1310 EAR PLUGS
Stylish banded hearing protector Innovative flexible band for optimum fit
and superior comfort. Unique rotational flexure offers optimal positioning
and easy manipulation. Attenuation: SNR=26dB, H=30dB, M=22dB,
L=19dB.
Conforms to: EN352-2
Product Code: DRS49HD
26dB
EAR HEADBAND
The E-A-R headband provides Non-invasive, comfortable hearing
protection. No hinged band. Dermatologically safe plugs are nonirritating band helps prevent loss and is ideal for intermittent use.
SNR = 23dB.
Conforms to: EN352-2.
Product Codes: PEP07HD
PEP19HD - Replacement Pods
SNR
23dB
MOLDEX WAVEBAND® 1K BANDED
EARPLUGS
Anatomically designed banded earplugs. Worn under the chin to allow
freedom of movement without contact sounds. Extremely lightweight –
only 12 g. Band pressure only 1,2 N for high level of comfort.
Replacement pods are available separately. SNR 27dB
Conforms to: EN352-2:2002
Product Code: PEP53HD
SNR
27dB
BANDED EAR PLUG - BBBEP
Extremely Light. Comfortable to wear. Soft absorbent foam caps. Worn
under the chin or behind the neck. SNR-21 H-25 M-17 L-14.
Conforms to: EN352-2
Product Code: PEP48HD
SNR
21dB
349
HEARING PROTECTION
HEARING PROTECTION
dispensers
LS400 DISPENSER
BILSOM 303L
FOAMPLUGS
Polyurethane Foam delivers
superior long-wearing comfort
and solid performance. Smooth,
soil-resistant skin prevents dirt or
other substances from
accumulating on skin or entering
ear canal. Attenuation Data:
SNR(dB) 33, H(dB) 32, M(dB) 29,
L(dB), 29. Dispenser with 400
Pairs.
Product Code: DEM09HD
SNR
Heavy-duty anodized aluminum
withstands constant use. Mount
on wall for easy access. Crank
handle to dispense earplugs.
LS-500 refills 500 pair per
box
SNR = 34db
Product Code: DEP27HD
SNR
33dB
34dB
MOLDEX STATION
DISPENSER SYSTEM
MELLOWS®
MOLDEX STATION
(500 PAIRS)
Put plugs at the centre of your
workforce. Plugs remain hygienic
as the dispenser mechanism is
automatically replaced with every
refill. Available with all Moldex
PU-foam disposable earplugs.
Available with 250 and 500 pairs
of plugs. The mounting bracket
comes separately and is needed
for all MoldexStations. Earplugs
are tested and certified to EN 3522:2002.
Product Codes:
A165M19004 - Dispenser
BEP10HD
- Bracket
350
LS-500 EARPLUG
DISPENSER
SNR
35dB
Earplugs for protection against
lower noise levels. Made of soft
PU-foam. Packed in pairs. Also
available in the hygienic
dispenser system MoldexStation.
Tested and certified to EN 3522:2002.
Product Codes:
BEP13HD - Dispenser
BEP10HD - Bracket
SNR
22dB
helmet mounted
HEARING PROTECTION
HEARING PROTECTION
ZONE 1 HELMET MOUNTED MUFF
Zone 1 industrial models are easily identifiable by their durable and
practical black coloured ear cup with clearly visible yellow insert and
spacer. Zone 1 offers a lightweight and comfortable solution for use in
low to medium noise level work environments, such as general industry,
DIY, grass/bush cutting and food processing. A consistent all round
performer at all frequencies, Zone 1 is suitable for long term use in low
noise level environments or shorter term use in medium level noise
environments and enables workers to remain aware of their external
environment without over protecting. Lightweight, comfortable design.
Stylish dual finish black ear cup with yellow insert and spacer. Concaved
acoustic foam fits a wide range of ear size and shapes. Supple cushions
maintain performance & comfort. Full integration with other PPE.
Globally approved (CE, GOST, ANSI, AUS/NZ). SNR Rating 27dB.
Conforms to: EN352-1
Product Code: PEM25HD
SNR
27dB
ZONE 2 HELMET MOUNTED MUFF
Zone 2 industrial models are easily identifiable by their durable and
practical black coloured ear cup with clearly visible orange insert and
spacer. Zone 2 offers an effective and comfortable solution for use in
more demanding noise level environments, particularly medium to high
noise level work, such as wood working, operating lathing machines and
power tools, asphalting or general construction. A consistent all round
performer most effective at mid to high level frequencies, Zone 2 is
suitable for long term use in medium noise level environments or shorter
term use in high level noise environments. Lightweight, comfortable
design. Stylish dual finish black ear cup with orange insert and spacer.
Concaved acoustic foam fits a wide range of ear size and shapes. Supple
cushions maintain performance & comfort. Full integration with other
PPE. Globally approved (CE, GOST, ANSI, AUS/NZ). SNR 29dB.
Conforms to: EN352-3
Product Code: PEM60HD
SNR
29dB
ZONE 3 HELMET MOUNTED MUFF
Zone 3 industrial models are easily identifiable by their durable and
practical black coloured ear cup with clearly visible red insert and spacer.
Zone 3 offers an effective and comfortable solution for use in extreme
noise level environments, such as, using pneumatic tools, compressors,
working close to diesel or jet engines or concrete drilling applications
found in mining, oil & gas, energy, utilities, aviation, rail transportation
and general heavy industry. Zone 3 offers the highest level of protection
and can be trusted to effectively attenuate at all frequencies, even low
frequencies, which are particularly challenging to attenuate. Lightweight,
comfortable design. Stylish dual finish black ear cup with red insert and
spacer. Concaved acoustic foam fits a wide range of ear size and shapes.
Supple cushions maintain performance & comfort. Full integration with
other PPE. Globally approved (CE, GOST, ANSI, AUS/NZ). SNR Rating 32dB.
Conforms to: EN352-1
Product Code: PEM31HD
SNR
32dB
351
HEARING PROTECTION
HEARING PROTECTION
OPTIME I
For high tones &
high volume...
OPTIME II
For lower tones &
higher volume...
OPTIME III
For bass tones &
very high volume...
ear muffs
Style
Product Code
SNR
Overhead
PEM14HD
27dB
Behind Head
PEM29HD
26dB
Helmet Mounted - Champion & Concept
PEM03HD
26dB
Optime I Hygiene Kit
PEM33HD
Style
Product Code
SNR
Overhead
PEM06HD
31dB
Behind Head
PEM04HD
31dB
Helmet Mounted - Champion & Concept
PEM15HD
30dB
Optime I Hygiene Kit
PEM12HD
Style
Product Code
SNR
Overhead
PEM05HD
35dB
Behind Head
PEM16HD
35dB
Helmet Mounted - Champion & Concept
PEM11HD
34dB
Optime I Hygiene Kit
PEM19HD
3M™ PELTOR™ OPTIME I
Optime I is very versatile protection, characterised by its
lightness. Despite being so lightweight, it is the best imaginable
protection. We have combined a low profile with generous inside
depth. This makes it easy to team with other equipment and
means that the ear rests comfortably.
Optime I is the natural choice when you need to use all-round
protection for both short and long spells. The wide, comfortable
sealing rings are filled with a unique combination of fluid and
foam, which gives optimum sealing and low contact pressure,
ensuring the best possible comfort even during long periods of
use.
It is first-rate for use in environments with moderate industrial
noise, such as workshops, sheet-metal shops and printing works,
but can also be used to good effect outdoors, for instance when
mowing the lawn or in connection with hobby and leisure
activities.
Conforms to: EN352-1
Product Codes: PEM14HD - Overhead SNR = 27dB
PEM29HD - Neck Band SNR = 26dB
PEM03HD - Helmet Mounted SNR = 26dB
PEM33HD - Hygiene Kit
Kit contains new sealing rings and muffler
pads.
352
ear muffs
HEARING PROTECTION
HEARING PROTECTION
3M™ PELTOR™ OPTIME II
Optime II has been developed for demanding noise-hazard
environments and muffles even extremely low frequencies to a
maximum degree. The sealing rings are filled with a unique combination
of liquid and foam. The result is an optimum seal with low contact
pressure, which provides snug comfort even during long-time use. The
sealing rings have ventilation channels and are covered with soft,
patterned, hygienic foil.
Optime II is a suitable choice for environments with substantial industrial
noise or construction machinery, airports and agricultural work.
Conforms to
EN352-1 SNR
Product Codes: PEM06HD - Overhead SNR = 31dB
PEM04HD - Neck Band SNR = 31dB
PEM15HD - Helmet Mounted SNR = 30dB
PEM12HD - Hygiene Kit
Kit contains new sealing rings and muffler pads.
3M™ PELTOR™ OPTIME III
Optime III is a super-muff, and has been developed for use in extremely
noisy environments. The protection is based on a technology with a
double casing that minimises resonance in the holder casing. This results
in maximum high-frequency muffling, while at the same time its still easy
to understand speech and signals.
An acoustic connection between the inner volume and the volume
between the casings in its turn provides maximum low-frequency
muffling. The sealing rings are broad and filled with soft plastic foam for
the best fit and low contact pressure. Effective protection and best
comfort are the hallmarks of Optime III.
Conforms to: EN352-1 SNR
Product Codes: PEM05HD - Overhead SNR = 35dB
PEM16HD - Neck Band SNR = 35dB
PEM11HD - Helmet Mounted SNR = 34dB
PEM19HD - Hygiene Kit
Kit contains new sealing rings and muffler pads.
353
HEARING PROTECTION
3M PELTOR X SERIES EAR DEFENDERS
DESIGN
Protected wire headband - building on the successful design of
the current 3M™ Peltor™ Optime™ range. Lightweight dual
moulded cups with maximum space inside to help minimise
heat and moisture build-up. Integrated design for increased
robustness. Colour coded for ease of selection. Electrically
insulated headband. Easy to clean.
COMFORT:
Easy to adjust headband. Wire headband ensures constant
pressure over prolonged wearing periods. Twin headband
design helps reduce heat build-up, provides good fit and
balance.
PROTECTION:
354
Streamlined cups without compromising attenuation. Works
well with a range of 3M eyewear and respirators. New smart
sealing ring.
3M™ PELTOR™ X1 EAR DEFENDERS
SNR
27dB
3M™ PELTOR™ X2 EAR DEFENDERS
The 3M Peltor X2 Ear Defenders are designed to offer protection against moderate to high noise
levels. For example, roadworks or construction. Slim-line cups for moderate to high attenuation
(SNR 31dB) that meets the needs of most industrial applications. Lightweight design. Simple
colour coding: yellow, indicating moderate to high attenuation.
Attenuation:
Headband: SNR=31dB, H=34dB, M=29dB, L=20dB
Helmet Attachment: SNR=30dB, H=33dB, M=28dB, L=19dB
Product Codes:
PEM82HD - X2 Ear Muff
PEM83HD - X2 Helmet Mounted Ear Muff
PEM91HD - X2 Hygiene Kit
HEARING PROTECTION
The 3M Peltor X1 Ear Defenders are designed to offer protection against light industry noise. For
example, grounds maintenance or power drilling. Slim-line cups for moderate attenuation (SNR
27dB) that meets the needs of most industrial applications. Lightweight design. Simple colour
coding: green, indicating the first level of attenuation within this range.
Attenuation:
Headband: SNR=27dB, H=32dB, M=24dB, L=16dB
Helmet Attachment: SNR=26dB, H=30dB, M=23dB, L=15dB
Product Codes:
PEM80HD - X1 Ear Muff
PEM81HD - X1 Helmet Mounted Ear Muff
PEM90HD - X1 Hygiene Kit
SNR
31dB
3M™ PELTOR™ X3 EAR DEFENDERS
The 3M Peltor X3 Ear Defenders are designed to offer protection against high noise levels. For
example, forestry or heavy engineering. The 3M™ Peltor™ X3 utilises a newly designed spacer to
help improve attenuation without the need for a double cup design, thus increasing the space
inside the cup for greater comfort and wearability. High attenuation (SNR 33dB) from a single cup
design, light-weight and slim compared with similarly attenuating products. Simple colour
coding: red indicating high attenuation.
Attenuation:
Headband: SNR=33dB, H=35dB, M=30dB, L=25dB
Helmet Attachment: SNR=32dB, H=34dB, M=30dB, L=24dB
Product Codes: PEM84HD - X3 Ear Muff
PEM85HD - X3 Helmet Mounted Ear Muff
PEM92HD - X3 Hygiene Kit
SNR
33dB
3M™ PELTOR™ X4 EAR DEFENDERS
The 3M Peltor X4 Ear Defenders are designed to offer protection against high noise levels, whilst
maintaining a sleek, low profile, aesthetically pleasing design. Extremely slim and light-weight
cups help to improve compatibility when used with other Personal Protective Equipment. New
specially formulated damping pads and innovative foam contained in the sealing ring provide
excellent acoustic protection, particularly against sounds dominated by low frequencies. Simple
colour coding: bright green, indicating high attenuation combined with an extremely slim,
lightweight design.
Attenuation:
Headband: SNR=33dB, H=36dB, M=30dB, L=22dB
Helmet Attachment: SNR=32dB, H=36dB, M=30dB, L=21dB
Product Codes: PEM86HD - X4 Ear Muff
PEM87HD - X4 Helmet Mounted Ear Muff
PEM93HD - X4 Hygiene Kit
33dB
SNR
3M™ PELTOR™ X5 EAR DEFENDERS
The 3M Peltor X5 Ear Defenders are designed to offer protection against extremely high noise
levels. For example, airports, quarrying or paper mills. Unparalleled attenuation (SNR 37dB) as a
result of an optimum combination of specially formulated foam technology and a newly designed
spacer and cup. Despite the larger cups the product remains relatively lightweight with excellent
balance and wearer comfort. Simple colour coding: black, for extremely high attenuation in
demanding environments.
Attenuation:
Headband: SNR=37dB, H=37dB, M=35dB, L=27dB
Helmet Attachment: SNR=36dB, H=36dB, M=34dB, L=26dB
Product Codes: PEM88HD - X5 Ear Muff
PEM89HD - X5 Helmet Mounted Ear Muff
PEM94HD - X5 Hygiene Kit
SNR
37dB
355
HEARING PROTECTION
HEARING PROTECTION
ear muffs
PRO-TAC II
Electronic Level Dependent Hearing Protector. The Protac II's Active-volume function keeps you in
touch with your surroundings while effectively protecting your hearing from harmful noise and
impulse sounds like gunshots. Harmless sounds come through with no problem and weak sounds are
even amplified, so you hear better with a ProTac than without hearing protection at all. It
automatically shuts-off after two hours if no function is used. Improves communication and safety .
Level dependent function in stereo that lets you hear ambient sound: conversation, machine sounds
and warning signals. Plenty of space for the ear. Last setting is stored when switched off. Headset
option with guide-mounted microphone. Three colour options: Military Green, Red, Black. Automatic
shut-off after two hours if no function is used. Battery life is about 1000 hours. Warning signal when
power is low, before shut-off. Audio input jack for external radio. Available as Bluetooth headset (A2DP
profile). Not compatible with WS adapters. SNR = 32dB.
Conforms to: EN 352-1 & EN 352-4
Product Code: PEM66HD
SNR
32dB
3M™ PELTOR™ WS WORKSTYLE
Peltor electronic hearing protection offers unique acoustic performance, providing outstanding
communication in very high noise environments. Control what you hear! Listen wirelessly to music or
podcasts via stereo Bluetooth®. If a call is received, the music switches off and resumes at the end of
the conversation. Tailor your sound profile with different volumes for surround sound, mobile calls and
music! Dynamic, well-balanced stereo sound. Filters out noise, including sudden loud noises. Simple to
operate. Distinguishes speech from noise at ultra-high speed.
Conforms to: EN352-1
Product Code: PEM73HD
SNR
26dB
3M™ PELTOR™ SPORTTAC™ MT16H210F-478-RD
ELECTRONIC LEVEL DEPENDENT PROTECTORS
Electronic Level Dependant Hearing Protector “Sport Shooting” model with black shells. With its slim
design and smooth level dependent function this product is ideal for areas where impulse noise is
present. Available in different colours. Developed specifically for hunters and marksmen. Smooth level
dependent function, which eliminates abrupt sound cut-off. Interchangeable shells make it easy to
change colour. Equipped with automatic shut-off function. Collapsible for easy storage. Black with red
shells.
Product Codes: PEM71HD
PEM53HD - Hygiene Kit
356
ear muffs
HEARING PROTECTION
This level dependent hearing protector radio provides comfortable, effective protection from harmful
noise. At the same time, it provides added safety because its level dependent function attenuates loud
noises while amplifying weak ones. The radio receiver provides extra working pleasure and the sound
is reproduced in stereo with a bass that does the music justice. Available as a J11 Headset and Flex
Headset. Available in Headband and Helmet Attachment options. The level dependent function
‘listens’ to your surroundings and adapts to what it ‘hears’. Each ear shell has a microphone that
captures all sounds. The electronics inside analyse the information and process the sound before
reproducing it to the ear. Easy-to-handle volume control knobs for radio and level dependent
function. A short, flexible antenna provides excellent reception with no annoying interference, even in
harsh conditions. Switches automatically from stereo to mono for the best reception in the event of a
weak signal. FM/AM switch to choose your radio reception.
Product Code: PEM02HD
HEARING PROTECTION
3M™ PELTOR™ ALERT M2RX7A HEARING
PROTECTOR
SNR
32dB
3M™ PELTOR™ LITE-COM™ BASIC TWO WAY
COMMUNICATION
A licence free, simple to use, built-in Two-way Communication Headset. Also available as a guide
receive headset. Headband, Neckband, and Helmet Attachment options. Communication on 8
channels in the PMR 446 MHz band. 38 subchannels allow several user groups to communicate
without listening to other groups on the same channel. An electronic voice in the receiver tells you the
settings of the device. Unused, Lite-Com Basic switches off automatically to save the batteries.
Conforms to: EN352-1
Product Code: PEM18HD
SNR
31dB
3M™ PELTOR™ LITE-COM™ III TWO WAY COMMUNICATION
Available in two versions; with 8 channels in the PMR 446 MHz band or with 69 channels on the LPD
433 MHz band (A users license may be required). On the PMR channels 38 subchannels allow several
user groups to communicate without listening to other groups on the same channel. Built-in activesound function lets you hear ambient sounds; warning signals, machine sounds, conversation etc.
Sudden impulse noises at harmful levels are immediately attenuated. An electronic voice in the
receiver tells you the settings of the device. LCD display to visualize advanced and standard settings.
Separate PTT button for the auxiliary input, where a cellular phone, a com. radio, or other audio source
can be connected. Unused, Lite-Com III switches off automatically to save the batteries.
Product Code: PEM50HD
357
HEARING PROTECTION
HEARING PROTECTION
ear muffs
LEIGHTNING L1S HEADBAND
EARMUFF
Bilsom’s patented Air Flow Control™ technology delivers optimal
attenuation across all frequencies, without increasing earcup size or
weight. A patented baseplate chamber and high-tech non-woven layer
manage the flow of air inside the earmuff to control how sound reaches
the ear. The result is better, more consistent overall attenuation for
virtually all industrial noise environments. Robust steel headband
withstands demanding use, especially in tough environments. Snap-in
ear cushions make replacement quick and easy. Padded foam headband
delivers long-wearing comfort with minimal pressure on the head.
Attenuation Data: SNR(dB) 30, H(dB) 31, M(dB) 28, L(dB) 23.
Conforms to: EN352-1:2002
Product Code: BEM05HD
SNR
30dB
THUNDER T3S HEADBAND EARMUFF
Bilsom’s patented Air Flow Control™ technology delivers optimal
attenuation across all frequencies, without increasing earcup size or
weight. A patented baseplate chamber and high-tech non-woven layer
manage the flow of air inside the earmuff to control how sound reaches
the ear. The result is better, more consistent overall attenuation for
virtually all industrial noise environments. Air Flow Control is a standard
feature on all Thunder series earmuffs. Thunder’s robust non-deforming
dielectric construction withstands use and abuse, while protecting your
workers in electrical environments. Thunder’s non-deforming outer
headband provides better comfort, minimizes pressure on head,
withstanding rough treatment in the toughtest workplaces. Innerventilated headband provides better positioning, minimizes pressure on
the head. Soft, comfortable contact surface breathes easier in
warm/humid climates. Quick Click height adjustment remains fixed
during wear. Snap-In Ear Cushions make replacement quick and easy.
Attenuation Data: SNR(dB) 36, H(dB) 37, M(dB) 34, L(dB) 26.
Conforms to:
EN352-2
Product Codes:
PEM69HD
PEM70HD - Hygiene Kit
358
SNR
36dB
ear muffs
HEARING PROTECTION
HEARING PROTECTION
MSA LEFT/RIGHT™ HEADBAND EARMUFF
The MSA left/RIGHT™ Ear Muffs have dedicated right and left ear cups
that are designed to fit ears of all shapes and sizes which offers increased
comfort and protection. The headband's breakthrough design simulates
the head's curves to provide a comfortable and stable fit, balancing muffs
with ear cup angle. Precise fit provides maximum loud noise protection
using minimal cup size. Headband adjusts up and down to provide
custom fit for different head sizes. Available in low, medium, and high
attenuation.
Conforms to: EN352-1 Overhead
EN352-3 Helmet Mounted
Product Code: PEM74HD
SNR
24dB
STANDARD MUFF
A popular choice of ear defender which offers effective, economical
protection. H=28 M=19 L=13. SNR = 27dB.
Conforms to: EN 352-1
Product Code: PEM40HD
SNR
27dB
BIG BLUE EAR MUFF
A quality defender, suitable for use in medium duty industrial
applications. Large foam cups offer excellent attenuation. Soft, wide
foam cushions for all day comfort - ideal for long shifts, Generously
padded, reinforced plastic headband. Durable Acylonitrile Butadiene
Styrene cups. Packed in display bags. Flexible strap to allow behind-thehead fit. Can be worn with an industrial safety helmet. Hygiene kits also
available. Over the Head H=33 M=27 L=18 SNR = 30dB. Behind the Head
H=31 M=23 L=16 SNR = 26dB.
Conforms to: EN352-1
Product Code: PEM10HD
SNR SNR
30dB 26dB
359
HEARING PROTECTION
HEARING PROTECTION
accessories
3M™ PELTOR™ OPTIME™
EARMUFF HYGIENE KITS
Hygiene Kit for the Optime™ II Earmuff. Kit contains new
sealing rings and muffler pads which can be replaced in
a few easy steps.
Product Codes: PEM33HD - Hygiene Kit for Optime I
PEM12HD - Hygiene Kit for Optime II
PEM19HD - Hygiene Kit for Optime III
CONTOUR™ MK7®/EVO® RANGE
EAR DEFENDER - BLACK
Easy to attach and detach with spring loaded arms that
give an excellent fit to the ear. When not in use the arms
allow the cups to stand off clearly from the head.
SNR=26.
Product Code: PEM79HD
For use with JSP Helmets, page 306
CENTURION BALTIC EAR
DEFENDER
Helmet Mounted ear defender to fit to all Centurion
safety helmets, except for the Spartan helmet. General
purpose, economy ear defender suitable for most
requirements. Attenuation: SNR: 25dB, H: 29dB, M:
22dB, L: 15dB.
Conforms to: EN352-3.
Product Code: PEM47HD
For use with Vision Safety helmet,
page 311
360
respiratory protection
361
respiratory protection
respiratory protection
types of respiratory Hazard:
assiGned protection factors (apfs)
dusts: Airborne particles that result from solid material being broken
up during processing. Fine dust remains in the air longer and is easier to
inhale.
Mists: Usually combinations of several hazardous liquid chemicals.
These are tiny droplets caused by atomisation and condensation
processes such as spraying.
Metal fumes: Fine particles that remain in the air after vaporised
metals cool.
Gases: Airborne and able to move freely and quickly at room
temperature.
Vapours: Similar to how water vapour evaporates from water, these are
the gaseous states of substances that are solid at room temperature.
The workplace level of respiratory protection that a respirator or class of
respirators is expected to provide employees when the employer
implements a continuing, effective respiratory protection program as
specified by 29CFR 1910.134.
WHicH protection factor?
ffp1 respirators:
Protection Factor:
APF4
Typical Applications: Low levels of fine dust (up to 4 x WEL) and oil or
water based mists typically found during hand sanding, drilling and
cutting.
ffp2 respirators:
Protection Factor:
APF10
Typical Applications: Moderate levels of fine dust (up to 10 x WEL) and
oil or water based mists typically found during plastering, sanding and
wood dust.
ffp3 respirators:
Protection Factor:
APF20
Typical Applications: Higher levels of fine dusts (up to 20 x WEL) and oil
or water based mists typically found when handling hazardous powders
in the pharmaceutical industry or work with biological agents and
fibres.
speciality respirators:
Protection Factor:
APF4 or 10
Typical Applications: Fine dust/oil or water based mists. Options for
metal fume, ozone and nuisance levels of certain gases and vapours
dependent on model.
types of respiratory protection
disposable Masks:
Ideal for short-duration applications, easy-to-use and maintenance free.
Protection form particulate hazards. Disposable Masks offer various
levels of protection to various hazards. It is therefore important to make
the correct choice of type of disposable mask.
reusable respirators:
Cost-effective solution providing comfortable and secure fit. Designed
for regular use these give the option of gas, vapour, particle or
combined protection. Can be integrated with other protection forms
such as eye protection. Re-usable respirators provide many options and
are therefore a versatile solution.
powered respirators and supplied air products:
A very effective form of respiratory protection suitable for a broad range
of industrial applications. These provide increased wearer comfort and a
higher level of protection therefore ideal for longer-duration
applications.
respiratory LaWs
Employees who need respiratory protection are required by law to be
provided with the correct standard of protection by their employers.
Employers are also required to give training for its use and ensure it is
maintained.
362
WorkpLace exposure LiMits (WeLs)
WELS for hazardous substances at work are set by the Health and Safety
Commission (HSC) and are published in the EH40. They are the
concentrations in the air, measured over long term (8 hour) and short
term (15 minute) periods. A WEL should never be exceeded and should
be brought down as low as possible, as far as reasonably practicable.
european standards for
respiratory protection
EN136:
EN137:
Full face pieces
Self contained open circuit compressed air breathing
apparatus
EN140:
Half mask face pieces
EN141:
Gas/Vapour filters
EN143:
Patriculate filters
EN146:
Powered respirators with hood or helmet
EN147:
Powered particle filter full face masks
EN149:
Filtering face piece respirators to protect against particles
EN270:
Compressed air units with hood
EN371:
Gas and combined filters for use against low boiling organic
compounds
EN402:
Escape apparatus, self contained breathing apparatus with
full face mask or mouth piece assembly
EN405:
Valve filtering half mask respirators (maintenance free) for
gases and/or particulates
EN1146: Compressed air escape apparatus with hood
EN1835: Light duty supplied air
EN12941 Powered respirators with hood or helmet
requiring low flow indicator
EN12942: Powered respirator full face masks
en136: MiniMaL requireMents for
oVeraLL Masks
Determines the minimal requirements of the overall masks for
respiratory protection equipment. It contains laboratory tests and
practical performance tests to check the conformity with the
requirements below:
Resistance to temperature, Resistance to impacts,
Resistance to flame, Resistance to thermal
radiation, Resistance to traction, Resistance to
cleansers and disinfectants.
Furthermore, the visual inspection must concern the marking and the
manufacturer information's guide.
en140: MiniMaL requireMents for
HaLf-Masks and quarter-Masks
Specifies the minimal characteristics required for half-masks and
quarter-masks when intended to be used with respiratory protection
equipment. It contains laboratory tests and practical performance tests
to check the conformity with specifications below :
Resistance to impacts, Resistance to cleansers and
disinfectants, Resistance to temperature,
Resistance to flame, Respiratory resistance.
WHat is a WorkpLace respiratory
Hazard?
en141: Gas fiLters and coMpound
fiLters
HoW to cHoose tHe riGHt protection
Concerns gas filters and compound filters as component of respiratory
respiratory protection
en143: fiLters aGainst particLes
Refers to filters against particles as component of the respiratory
protection equipment against particles. It contains laboratory tests and
practical performance tests to check the conformity with the following
specifications :
Resistance to impacts, temperature, humidity,
corrosive atmospheres, Mechanical Resistance,
Respiratory resistance.
en149: fiLterinG HaLf-Masks aGainst
particLes
used as respiratory protection equipment against particles. It contains
laboratory tests and practical performance tests to check the conformity
with the requirements below :
Resistance to impacts, Resistance to cleansers and
disinfectants, Resistance to flame, Respiratory
resistance.
en405: fiLterinG HaLf-Masks aGainst
particLes
Specifies performance requirements, test methods and marking
requirements applicable for filtering half-masks fitted with valves and
gas filters or compound, used as respiratory protection equipment. It
contains laboratory tests and practical performance tests to check the
conformity with the specifications below:
Resistance to handling and wear, Resistance to
impacts, Respiratory resistance, Resistance to flame.
respiratory protection
protection equipment without assistance. It includes laboratory tests to
check the conformity with the following requirements:
Resistance to impacts, temperature, humidity,
corrosive atmospheres, Mechanical resistance,
Respiratory resistance.
Specifies the minimal characteristics required for filtering half-masks
cLean air? take care!
This respiratory campaign aims to help reduce occupational respiratory
disease by raising awareness of the issues that surround it.
Employees have the right to be aware of the potential dangers that they
face in their workplace and to be given the opportunity to protect
themselves adequately; employers have a legal obligation to ensure that
their workforce is protected as far as is practical.
about respiratory protective equipment (rpe)
• RPE is designed to protect the wearer from breathing in hazardous
substances in the air
• Failing to select, use, store and maintain the correct RPE can cause
workers to breathe in too much of hazardous substances at work. This
can cause: lung and airways diseases (e.g. asthma, cancers); diseases
in other parts of the body (e.g. heart, kidney, reproductive and
nervous systems)
• Using the wrong RPE can lead to fatalities in some cases (e.g. areas of
low oxygen levels, confined spaces)
there are two types of rpe (respirators & Breathing apparatus)
respirators
• Must use the correct filter(s) to remove contaminants (e.g.: dusts,
sprays, mists, gases, fumes, vapours, micro-organisms or a
combination of these) found in your workplace
• Must never be used in confined spaces, areas of low oxygen levels or
very high contaminant levels. You should consider these situations as
immediately dangerous to life or health. They are commonly found
in confined spaces (e.g. chambers, tanks, vats, pits, trenches, pipes,
sewers, flues or wells)
Breathing apparatus (Ba)
• Must use breathing quality air from a source such as an air cylinder
or an air compressor
• Must check the air quality at least once every three months or more
frequently when the quality of the air supplied cannot be assured
• Suitable BA may be used in confined spaces
When to use rpe
RPE may be used in the following conditions:
• As a last step control measure after putting in place other control
measures (e.g. using contaminant suppression methods or extraction
ventilation)
• For short-length or infrequent work where control at source is not
practical
• As a temporary measure before other controls are in place
• For emergency work. e.g. breakdowns, maintenance, spills
• To escape in an emergency or to rescue people in danger
• As additional protection in case other control measures fail to operate
‘ce’ mark
• Means that the RPE meets the minimum design and performance
features as set out in law
• A CE mark on RPE does not mean it is necessarily the correct type for
your task. You must select the correct RPE for your task. Get
professional help where necessary (institutions who can provide help
are listed on the back page)
select the correct rpe
• Use the Table in the ‘Clean Air? Take Care!’ leaflet to write down your
RPE selection requirements. You should have information about the
wearers, hazards, hazardous substances, the tasks to be performed
and the environment in which RPE is to be used. Without this
information you will not be able to select the correct RPE
• Once you have completed all of the information in the Table, it should
help you select the correct type of RPE for the work/task. BSIF
member companies are able to provide help and assistance with
product selection based on the information you provide
• As the employer, it is your responsibility to decide which RPE is right
for the task undertaken
provide training
To ensure RPE wearers know:
• Why and when they need to use the RPE provided
• The correct procedures for fitting, use, cleaning, maintenance and
storage of RPE
• The correct techniques to carry out the task/work when wearing RPE
using rpe
• Read and follow manufacturers’ instructions to ensure: the RPE face
piece fits the wearer every time it is worn; the RPE is tested and
checked for correct functioning before use; the RPE is cleaned and
stored correctly after use; the RPE is maintained and tested at least
every month or discarded.
• Keep records of maintenance carried out
363
respiratory protection
respiratory protection
face fit testinG
if you're usinG a rpe tHat requires a face seaL...
don't take a cHance on safety.
ask yourseLf tWo questions:
• are you sure that the rpe you provide to your employees
fits them properly?
• are you sure the face fit test was carried out competently?
It is a legal requirement to correctly select RPE and this includes, for
many types of PPE, a facepiece Fit Test conducted by a competent
person.
so HoW can you Be sure tHe person
conductinG tHe fit test is coMpetent?
The British Safety Industry Federation, along with the HSE and other
industry stakeholders, have developed a competency scheme for Fit
Test providers.
The new Fit2Fit RPE Fit Test Providers Accreditation Scheme is
designed to confirm the competency of any person performing face
piece fit testing.
fit2fit accreditation
Are you sure that the RPE you provide to your employees fits them
properly? Are you sure the face fit test was carried out competently?
You ought to be, because the health of your employees could be at
serious risk.
Recent research indicates that up to 50% of all RPE used does not
offer the wearer the level of protection assumed and one of the major
reasons is that it simply does not fit! Yet, under the regulations RPE
must be correctly selected and this includes, for many types of RPE, a
face piece Fit Test conducted by a competent person. So how can you
be sure the person conducting the fit test is competent?
In view of these major concerns the British Safety Industry Federation,
along with the HSE and other industry stakeholders have developed a
competency scheme for Fit Test Providers. The Fit2Fit RPE Fit Test
Providers Accreditation Scheme is designed to confirm the
competency of any person performing face piece fit testing.
fit2fit rpe fit test providers accreditation scheme
A scheme designed to confirm the competency of any person
performing facepiece fit testing.
• competent - because they have passed an industry recognised
exam and therefore demonstrated that they have a
thorough knowledge of the HSE guidance on fit
testing;
• competent - because they have demonstrated that they know
how to fit test in practical circumstances;
If you are using RPE that requires a face fit test, are you sure that your
Fit Tester knows what they are doing? Don’t forget that you, as an
employer, are still responsible!
Why risk it? Be sure your RPE Fit Test Provider is competent. Only use a
tester who can show you Fit2Fit Accreditation credentials.
fit2fit accreditation credentiaLs
There are four types of RPE fit testing methods covered by the
scheme. You must ensure your Fit2Fit accredited provider is certified
for the testing method being used.
The four main types are:• Qualitative Method (Taste Test)
• Quantitative Method (Ambient Particle Count / Portacount test)
- with N95 Companion or equivalent
- without N95 Companion or equivalent
• CNP (Controlled Negative Pressure)
Fit2Fit Accredited testers can hold accreditation for one, two, three or
all four methods. Ensure your tester is appropriately qualified for the
testing you want.
364
respiratory protection
3M™ ft-10(sweet) and 3M™ ft-30 (bitter) fit test kits are suitable for disposable respirators
and half face masks fitted with particulate or combination filters.
!
Wearers must be cLean sHaVen to
get a good fit with a respirator.
!
tHe ‘taste’ test
part 1 - the sensitivity test
1. Add ½ teaspoon of sensitivity solution (in red
labelled bottle) into the sensitivity nebuliser
(marked in red).
2. Put test hood on person.
3. Ask person to breath through their mouth with
their tongue at the front and ask them to indicate
immediately when they taste solution.
4. Slowly squeeze solution into the hood and count
the number of squeezes it takes for the solution to
be tasted.
5. Ask the person to take a drink of water and wait for
10 minutes, making sure that they wipe their lips to
remove any traces of solution.
!
stop the test if: solution is not tasted after
30 squeezes. Try an alternative solution:
sweet taste:
Bitter taste:
3M FT11 (sensitivity solution)
3M FT12 (test solution)
3M FT31 (sensitivity solution)
3M FT32 (test solution)
Please note that in order to carry out a full fit test, ALL
the steps detailed below must be followed (Parts 1 & 2)
part 2 - the fit test
1. Add ½ teaspoon of test solution (in black labelled
bottle) into the test nebuliser (marked in black).
2. Make sure the respirator is fitted correctly. Refer to
3M fitting instructions or posters for correct
procedure.
3. Put test hood on person.
4. Introduce solution in an ‘initial dose’ and start the
exercises. Add a ‘top-up’ dose after every 30
seconds as per below:
Number of Squeezes
needed in part 1
1 - 10
11-20
21-30
Number of Squeezes
for Initial Dose
every 30 seconds.
10
20
30
respiratory protection
a Guide to 3M quaLitiVe fit testinG
Number of Squeezes
for ‘top-up’ dose
5
10
15
5. After the initial dose, ask the person to carry out the
7 exercises shown in turn for 1 minute each and
indicate immediately if solution is tasted.
Remember to add ‘top-up’ dose every 30 seconds.
6. record results: If solution is not tasted after all 7
exercises, they have passed the test with that
respirator. If solution is tasted, STOP test, clean
mouth, face and hands, refit respirator and start
Part 2 of test again. If solution is still tasted on the
second attempt, stop the test, clean hands, mouth
and face and try an alternative respirator, starting
Part 2 of the test again.
7. In the event of another failure, please call the 3M
Health and Safety Helpline on 1800 320 500
(Ireland) or 0870 60800 60 (UK).
365
respiratory protection
respiratory protection
366
3M 8710e cup-sHaped dust/Mist
respirator
3M 9312 foLdaBLe VaLVed dust/Mist
respirator
Protection against fine respirable dusts. Assigned Protection Factor = 4.
Sold in PACK OF 20.
conforms to: EN149:2001 FFP1
product code: pdM20Hd
Provides protection against fine dusts. Individually packed, this foldable
respirator features a 3 panel design, 3M Cool Flow valve and soft cover
web for good fit and greater protection. Assigned Protection Factor = 4.
Sold in PACK OF 10.
conforms to: EN149:2001 FFP1
product code: pdM19Hd
3M 8822 cup-sHaped VaLVed
dust/Mist respirator
3M 9322 foLdaBLe VaLVed dust/Mist
respirator
This respirator provides protection against fine dusts, water-based mists
and oil based mists. The convex shape and 3M Cool Flow Valve reduce
heat build-up to offer comfortable protection particularly in hot and
humid conditions. Assigned Protection Factor =10. Sold in PACK OF 10.
conforms to: EN149:2001 FFP2
product code: pdM24Hd
This respirator provides protection against fine dusts, water-based mists
and oil based mists. Individually wrapped, this foldable respirator /
features a three-panel design, 3M Cool Flow valve and soft cover web for
greater comfort and fit. Assigned Protection Factor =10.
Sold in PACK OF 10.
conforms to: EN149:2001 FFP2
product code: pdM26Hd
respiratory protection
respiratory protection
3M 9332 foLdaBLe VaLVed dust / Mist /
3M 8835 soft seaL dust / Mist / MetaL
MetaL fuMe respirator
fuMe respirator
This respirator provides protection against fine dusts, water-based mists
and metal fume. Individually packed, this foldable respirator features a
three-panel design, 3M Cool Flow Valve and soft cover web for greater
comfort and fit. Assigned Protection Factor =20. Sold in PACK OF 10.
conforms to: EN149:2001 FFP3
product code: pdM12Hd
3M 8810 dust Mask
3M 8810 Dust Mask for fine mists and dust protection. Reliable and
effective protection from infectious airbourne diseases as well as
harmful mists and dusts. This mask has a durable collapse resistant inner
and gives an excellent fit over a wide range of face sizes. This is provided
by convex shape, nose clip and twin-strap design. Maximum use level:
Assigned Protection Factor: 10. CE Marked. Sold in PACK OF 20.
conforms to: EN149:2001 FFP2
product code: pdM53Hd
This valved respirator provides comfortable, effective respiratory
protection against fine dusts, oil and water-based mists and metal fume.
The 3M Cool Flow Valve, soft sealing ring and adjustable straps ensure a
comfortable, confident fit. Cleanable sealing ring and additional "D"
Dolomite anti-clogging test allows use for more than one shift. Assigned
Protection Factor =20. Sold in PACK OF 5.
conforms to: EN149:2001 FFP3D
product code: pdM27Hd
3M™ 8812 particuLate respirator
The convex cup-shape design, along with twin strap design, nose foam
and nose clip ensure comfortable wear over a range of face sizes. The
collapse resistant shell offers durable, comfortable protection
particularly in hot and humid conditions. Provides respiratory
protection against low levels of fine dusts and mists. Yellow colour coded
straps denoting FFP1 protection level. Approval: CE Marked. Assigned
Protection Factor: 4. Sold in PACK OF 10.
conforms to: EN149:2001 FFP1 NR D
product code: pdM23Hd
367
respiratory protection
respiratory protection
3M 1873V HeaLtH care respirator (p3)
The 3M 1873v Valved Healthcare respirator meets the requirements of
EN149:2001 FFP3 and can be used to protect the wearer in concentration of
solid and non-volatile liquid particles up to 20 times the OEL (Occupational
Exposure Limit) CE Approved. 3M Health Care Respirators comply with the
EC Directive 89/686. This product is intended for use in infection control
practices.
conforms to: EN149:2001 FFP3
product code: pdM29Hd
3M 9925 WeLdinG fuMe respirator
Specifically designed for welding applications, this respirator provides
effective respiratory protection against water and oil based mists, fine dusts,
metal fumes and ozone. Features the 3M Cool Flow Valve and adjustable
straps to reduce heat and moisture build up to improve wearer comfort in a
hot environment. Assigned Protection Factor =10. Sold in PACK OF 10.
conforms to: EN149:2001 FFP2
product code: pdM32Hd
3M™ 9928 particuLate respirator
Provides respiratory protection against fine dusts, mists, metal fume and
Ozone. Specifically designed to offer respiratory protection in welding
operations. Efficient particulate filter resists clogging for extended use
against welding fume. Activated carbon layer filters out Ozone generated by
MIG, TIG and ARC welding operations. 3M™ Cool Flow™ Valve reduces heat
build-up to offer comfortable protection.
Flame retardant - the specially treated outer-shell offers increased flame
retardancy. Welding shields - low profile design for compatibility with
welding shields. Soft sealing ring and adjustable straps ensure a
comfortable, properly sealed fit. Blue colour coded valve lettering denotes
FFP2 protection level. Approval: CE Marked. Sold in PACK OF 10.
conforms to: EN149:2001 FFP2
product code: drs41Hd
368
respiratory protection
The advanced three-panel design and low breathing resistance filter
technology provides optimum comfort and easy communication, thus
ensuring improved wearer acceptance even during long working hours.
Being foldable they offer you more convenience than traditional cup shaped
respirators. Its features include an embossed and sculpted top panel for
improved compatibility with reduced fogging of eyewear and an innovative
chin tab to improve the ease of fitting. Provides respiratory protection
against low levels of fine dusts and mists. Approval: CE Marked. Assigned
Protection Factor: 4. Sold in PACK OF 20.
conforms to: EN149:2001 FFP1 NR D
product code: pdM54Hd
respiratory protection
3M™ aura 9310+ fLat-foLd
particuLate respirator
3M™ 9914 speciaLity nuisance odour
respirator (VaLVed) - ffp1
Relieves irritation: designed to offer relief from the irritation of low levels of
specific gases and vapours, often present alongside particulate hazards.
Reliable, effective protection against fine particulates. Activated carbon layer
provides relief from low levels of specific gases and vapours. Durable
collapse resistant inner shell. Excellent fit over a wide range of face sizes
provided by convex shape, nose clip and twin-strap design. Comfortable,
lightweight off-the-face design. 3M Cool Flow valve reduces heat build-up to
offer comfortable protection, particularly in hot and humid conditions.
Yellow colour coded straps denote FFP1 protection level. Approval: CE
Marked. Maximum use level: Particulates; Assigned Protection Factor: 4 x
WEL (Nominal Protection Factor 4 x WEL) and below WEL for organic
vapours.
conforms to: EN149:2001 FFP1
product code: dsr40Hd
3M™ aura™ 9422+ particuLate
respirator
The 3M Aura™ 9422+ Particulate Respirator has a unique combination of
features that help ensure the safety of workers and production: highly visible
and metal detectable, the 9422+ is made without staples or small
detachable parts. Protection Classification: FFP2. Exhalation Type: Valved.
Style: Flat Fold. Protects against: Dust/Mist. Maximum Usage Level: Up to 12
x TLV for particulates. Product Usage: Non Reusable. Hazard: Fine Dust, Oil &
Water Based Mist.
conforms to: EN149:2001+A1:2009 FFP2 NR D
product code: pdM02Hd
369
respiratory protection
respiratory protection
MoLdex 2475 pocketMask ffp2 nr d
VaLVed
This foldable pocket mask has all the features of a traditional Moldex cup
mask. Unfold and wear. Individually bagged. Metal free, CE Marked. Ideal for
Robust fit test programs. DuraMesh structure for optimum shape retention
and durability. ActivForm Seal automatically adjusts to different face shapes.
Ventex-valve: reduces moisture and heat, keeping the mask as cool as
possible.
conforms to: EN149:2001+A1:2009 FFP2 NR D
product code: BdM02Hd
MoLdex 2405 ffp2 nr d VaLVed Mask
Durable and comfortable, this dual purpose mask is ideally suited to most
industrial applications. No need for nose clips. Loop Strap for easy
application. Metal free, CE Marked. Ideal for Robust fit test programs.
DuraMesh® for optimum shape retention and durability. ActivForm® seal
automatically adjusts to different face shapes. Ventex®valve. Reduces
moisture and heat. 20 per box.
conforms to:
EN149:2001 FFP2D
product code: BdM12Hd
MoLdex air series ffp2 nr d
Protection against dust, mist and fume. FFP Mask with pleated filter
technology: 260% more filter surface area. Significantly reduced breathing
resistance. High filter capacity, longer usage time. Metal free, CE Marked.
Ideal for Robust fit test programs. DuraMesh®: strong and durable structure,
keeps the mask in shape. ActivForm®: no nose clip needed. Comfortable
nose seal. Loop strap with clip for quick, simple and safe on and off.
Protection Level: FFP2 NR D 10 units per box. Sizes: 3100&3105 M/L
3150&3155 S/M
conforms to: EN1149:2001+A1:2009
product codes: pdM97Hd
370
respiratory protection
respiratory protection
MoLdex 2555 ffp3 nr d VaLVed Mask
Protection against dust, mist and fume. Proven shape and durable FFP Mask.
Metal free, CE Marked. Ideal for Robust fit test programs. DuraMesh®: strong
and durable structure, keeps the mask in shape. ActivForm®: no nose clip
needed. Loop strap for quick, simple and safe on and off. Ventex-Valve
reduces moisture and heat. Protection Level: FFP3 NR D 20 units per box.
conforms to: EN149:2001+A1:2009
product codes: pdM03Hd
MoLdex air series ffp3 nr d
Protection against dust, mist and fume. FFP Mask with pleated filter
technology: 260% more filter surface area. Significantly reduced breathing
resistance. High filter capacity, longer usage time. Metal free, CE Marked.
Ideal for Robust fit test programs. DuraMesh®: strong and durable structure,
keeps the mask in shape. ActivForm®: no nose clip needed. Comfortable
nose seal. Loop strap with clip for quick, simple and safe on and off.
Protection Level: FFP3 NR D 10 units per box.
conforms to: EN149:2001+A1:2009
product codes: pdM17Hd
MoLdex 3405 ffp3 r d VaLVed Mask
The washable full face seal and unique pleated filter technology gives you
the option of using these masks for more than one shift. Reusable. Low
breathing resistance. Metal free, CE Marked. Ideal for Robust fit test
programs. Washable full face seal. Adjustable strap and clip. DuraMesh® for
optimum shape retention and durability. ActivForm® seal automatically
adjusts to different face shapes. Ventex®valve reduces moisture and heat. 5
per box.
conforms to: EN139 FFP3D
product code: pdM48Hd
371
respiratory protection
respiratory protection
aLpHa soLWay - e-series
The e-Series range of fold flat disposable respirators from Alpha Solway
offers many benefits such as economical pricing and ease of storage,
whilst their individual bagging also reduces risk of contamination.
Features and Benefits:
• Fold Flat design - easily stored in a pocket
• Soft, lightweight fabric gives comfortable face seal
• Large surface area of filter media lowers breathing resistance
• Charcoal options offer relief from odours/organic vapours below the
WEL
• Disposable product - no records or maintenance required
• Complete range from FFP1 NR D to FFP3 NR D
• Colour coded noseclip for ease of identification
• Staple free straps (suitable for food and pharmaceutical industries)
• Step valve - reduces heat build up within the respirator
• Perspex holders available which can be wall mounted at a
convenient location in the workplace
conforms to: EN149:2001+A1:2009, incorporating the
requirements of the 120mg loading test
product code: pdM93Hd
aLpHa soLWay - aLpHaMesH a-series
372
The alphamesh A-SERIES is the first vertical fold style of disposable
respirator to feature the alphamesh shell, preformed nosebridge and be
completely metal free. Colour coded to aid selection, this UNIQUE design*
offers improved comfort and fit with the retention of shape even in
extreme conditions.
• alphamesh shell - supports the filter media, maintains shape and
prevents collapse onto the face
• Noseclip free - preformed nosebridge, provides comfortable fit
eliminating the need for regular adjustment
• Utilising the latest filter technology - promotes low breathing
resistance
• Wide, continuous loop headstrap - effectively distributes the tension
to avoid any ‘tight spots’
• Adjustable clipped headstrap - enhances good fit and allows
respirator to drop away from face when not in use
• Low profile valve - aids field of vision and reduces heat and moisture
build up within the respirator
• Compatible with a wide range of other Personal Protective
Equipment (PPE)
• Completely metal free - suitable for food industry applications
• Six models available - including valved and charcoal containing
options
• Colour coded for ease of identification - White FFP1 NR, Blue FFP2
NR, Grey FFP2 NR with charcoal and Orange FFP3 NR
• Individually packed - to prevent contamination and permit
convenient storage in the pocket or toolbox
conforms to: EN149:2001+A1:2009 - incorporating the requirements of
the 120mg loading test
product code: pdM66Hd
respiratory protection
respiratory protection
aLpHa soLWay - 8000 series
The alphamesh 8000 SERIES has been developed to improve the comfort
of disposable respirators whilst maintaining an excellent face fit. Colour
coding the range makes identification simple when varying levels of
protection may be required or in specific manufacturing applications such
as the food industry.
• alphamesh shell - supports the filter media, maintains shape and
prevents collapse onto the face
• Noseclip free - preformed nosebridge provides comfortable fit
eliminating the need for regular adjustment
• Utilising the latest filter technology - promotes low breathing
resistance
• Wide, continuous loop headstrap - effectively distributes the tension
to avoid any ‘tight spots’
• Fully adjustable and clipped headstrap - enhances good fit and
allows respirator to drop away from face when not in use
• Low profile valve - aids field of vision and reduces heat and moisture
build up within the respirator
• Compatible with a wide range of other Personal Protective
Equipment (PPE)
• Completely metal free - suitable for food industry applications
• Six models available - including valved and charcoal containing
options
• Colour coded for ease of identification - White FFP1 NR, Blue FFP2
NR, Grey FFP2 NR with charcoal and Orange FFP3 NR
• Full inner face seal on FFP2 NR Charcoal and FFP3 NR models - to
further enhance comfort and face fit
conforms to: EN149:2001+A1:2009 - incorporating the requirements of
the 120mg loading test
product code: pdM73Hd
aLpHa soLWay - aLpHa s
The Alpha S has been specifically designed to ensure an excellent fit for
the smaller face. The unique inner face seal helps maintain a close and
snug fit around the chin area which is generally regarded by experienced
fit testers to be the main weakness on standard design disposable
respirators. Working very closely with the fit2fit accreditation scheme and
numerous users, Alpha Solway has developed a simple solution to an
industry wide problem. The "alpha S" has many features:
• a unique inner face seal
• 4-point adjustable head strap
• latest filter technology to reduce breathing resistance
• pre-formed nose bridge to help maintain a consistent fit
conforms to: EN149:2001+A1:2009
product code: pdM81Hd
373
respiratory protection
respiratory protection
nuisannce Mask
Basic moulded mask with adjustable nose piece. Sold in boxes of 50.
Minimal Risk.
conforms to: Not to EN standard
product code: pdM01Hd
ffp1 VaLVed dust Mask
Hypoallergenic non woven synthetic fibre valved disposable mask FFP1.
Sold in Boxes of 10.
conforms to: CE EN149
product code: pdM68Hd
ffp2 VaLVed dust Mask
374
Hypoallergenic non woven synthetic fibre valved disposable mask FFP2.
Sold in Boxes of 10.
conforms to: CE EN149
product code: pdM57Hd
ffp1 unVaLVed dust Mask
Hypoallergenic non woven synthetic fibre unvalved disposable mask
FFP1. Sold in Boxes of 20.
conforms to: CE EN149
product code: pdM67Hd
ffp2 unVaLVed dust Mask
Hypoallergenic non woven synthetic fibre unvalved disposable mask
FFP2. Sold in Boxes of 20.
conforms to: CE EN149
product code: pdM56Hd
ffp3 VaLVed dust Mask
Hypoallergenic non woven synthetic fibre valved disposable mask FFP3.
Sold in Boxes of 5.
conforms to: CE EN149
product code: pdM58Hd
respiratory protection
Maintenance free design for maximum safety and simplicity. No maintenance records are
required if disposed of within one month. Replace after 28 days or when damaged, breathing
resistance increases or breakthrough occurs, whichever occurs first. 2 large bonded carbon
filters for low breathing resistance. Low profile design for better peripheral vision. Low
resistance parabolic valve to reduce heat build-up. Soft/Non-allergenic face piece material.
Lightweight and well balanced design. Cradle head harness, Easy to fasten neck strap.
Approval: CE marked 3M 4251 Organic Vapour and Particulate Respirator: FFA1P2R D
.Gases/Vapours :10xWEL* or 1000ppm whichever is lower; Particulates:10xWEL* .
*WEL – Workplace Exposure Limit.
conforms to: EN405:2001
product code: prs06Hd
respiratory protection
3M™ 4251 Maintenance free
Gas/Vapour and particuLate respirator
3M™ 4255 Maintenance free Gas/Vapour and
particuLate respirator
Maintenance free design for maximum safety and simplicity. No maintenance records are
required if disposed of within one month. Replace after 28 days or when damaged, breathing
resistance increases or breakthrough occurs, whichever occurs first. 2 large bonded carbon
filters for low breathing resistance. low profile design for better peripheral vision. Low
resistance parabolic valve to reduce heat build-up. Soft/Non-allergenic face piece material,
Lightweight and well balanced design. Cradle head harness. Easy to fasten neck strap.
Approval: CE marked 3M 4255 Organic Vapour and Particulate Respirator: FFA2P3R D.
Gases/Vapours: 10xWEL* or 5000ppm whichever is lower; Particulates: 20xWEL*
*WEL – Workplace Exposure Limit.
conforms to: EN405:2001
product code: drs09Hd
3M™ 4277 Maintenance free Gas/Vapour and
particuLate respirator
Maintenance free design for maximum safety and simplicity. No maintenance records are
required if disposed of within one month. Replace after 28 days or when damaged, breathing
resistance increases or breakthrough occurs, whichever occurs first. 2 large bonded carbon
filters for low breathing resistance. Low profile design for better peripheral vision. Low
resistance parabolic valve to reduce heat build-up. Soft/Non-allergenic face piece material.
Lightweight and well balanced design. Cradle head harness. Easy to fasten neck strap.
Approval: CE marked 3M 4277 Organic Vapour/Inorganic and Acid Gas/Particulate Respirator:
FFABE1P3R D . Gases/Vapours: 10xWEL* or 1000ppm whichever is lower; Particulates:20xWEL*
*WEL – Workplace Exposure Limit.
conforms to: EN405:2001
product code: drs08Hd
3M™ 4279 Maintenance free Gas/Vapour and
particuLate respirator
Maintenance free design for maximum safety and simplicity. No maintenance records are
required if disposed of within one month. Replace after 28 days or when damaged, breathing
resistance increases or breakthrough occurs, whichever occurs first. 2 large bonded carbon
filters for low breathing resistance. low profile design for better peripheral vision. Low
resistance parabolic valve to reduce heat build-up. Soft/Non-allergenic face piece material.
Lightweight and well balanced design. Cradle head harness. Easy to fasten neck strap.
Approval: CE marked 3M 4279 Organic Vapour, Inorganic and Acid Gas, Ammonia and
Particulate Respirator: FFABEK1P3R D. Gases/Vapours: 10xWEL* or 1000ppm whichever is lower;
Particulates: 20xWEL* *WEL – Workplace Exposure Limit.
conforms to: EN405:2001
product code: prs66Hd
375
respiratory protection
respiratory protection
3M reusaBLe HaLf Mask
respirator 7000 series
This versatile system is suitable for many situations, It provides
filtering protection against particulates, many gases and vapours.
The 3M Bayonet Filter Fixing System. Versatility: A wide range of
filters are compatible with all the 3M 6000/7000/7500 series face
pieces. Positive locking: Sound, safe locking mechanism between
mask and filters. Durable seal even after extensive use. Quick and
easy closure system. Unique filter fixing system. Reusable respirator
with replacable parts. Twin filter design provides low breathing
resistance. Textured nose cup reduces face piece slippage and skin
irritation caused by perspiration build-up. Cradle head harness and
easy fasten neck strap. Low maintenance.
S/M, M/L, M/XL
sizes:
conforms to: EN140/CE marked
product code: drs34Hd
Filters not included with this mask. Please see pages 379 to 380 for
filters.
3M 7500 siLicone HaLf Mask
respirator
Provides a high level of wearer comfort. Patented 3M cool
valve provides easy breathing while reducing heat and
moisture build up. Unique head harness and yoke design
provide greater stability when wearing, and make the mask
much easier to wear with other head gear like welding and
grinding shields. Utilises all existing 3M 2000, 5000 and
6000 series filters and cartridges. Durable and re-usable
with a range of replacement parts. Improved sizing
characteristics, allows comfortable fit over wide range of
faces. Soft silicone material provides more flexibility and
fewer pressure points on face and head. Extremely pliable
face seal to improve fit. Nominal Protection Factor with P3
Dust Filter 50. Assigned Protection Factor with P3 Dust
Filter 20. Assigned Protection Factor with P2 Dust Filter 10.
Assigned Protection Factor with Gas or Combination Filters
10 or 1000 ppm whichever is the lower for Class 1 or 10 x
WEL (Workplace Exposure Limits) or 5000 ppm whichever
is the lower for Class 2.
sizes:
S/M, M/L, M/XL
conforms to: EN140
product code: 23r000185
376
Filters not included with this mask. Please see pages 379 to
380 for filters.
respiratory protection
The 3M 6000 Series full facepiece respirator provides low-maintenance
and offers the user comfort, convenience and easier breathing.
respiratory protection
3M™ fuLL facepiece respirator 6000
series
unique center adapter
 Directs exhaled breath and moisture downward
 Smooth surface allows for quick and easy cleaning
 Helps reduce debris from depositing in valve area
 M™ Cool Flow™ Exhalation Valve
 Cool Flow™ valve design helps make breathing easier
 Helps reduce heat and moisture build up in the facepiece
 Helps provide cool, dry comfort
Lens
 Wide field of vision helps provide excellent visibility
 Meets all the requirements of ANSI Z87.1-2003 for high impact (Z87+)
 Integrated optical correction limits distortion as you look from left
to right
comfort
 Lightweight, well-balanced
 Silicone faceseal enhances comfort and durability
 Available in three sizes (small, medium and large) to comfortably fit
many face sizes
cartridges and filters
3M full facepiece respirators can be used with a variety of chemical
cartridges and filters including:
 Particulate filters
 Chemical cartridges
 Combined cartridges and filters
sizes:
S/M, M/L, L/XL
conforms to: EN136 Class 1
product code: prs62Hd
drs36Hd - Replacement Head Harness
drs12Hd - Lens Cover (Pack of 100)
Please note that this product is sold without filters, please see pages 379 to
380 for filters.
377
respiratory protection
respiratory protection
3M 6000 series HaLf Mask
Reusable half masks designed for simplicity. Lightweight, (elastomeric) face piece. Unique 3M Bayonet filter fixing system.
Cradle head harness and easy fasten neck strap. Few replaceable parts for easy maintenance. Utilises all of the 3M™
2000, 5000 and 6000 Series Filters. Twin filter design for even distribution of weight and minimal obstruction
to field of vision. Sold individually and without filters. Sizes available: S/M M/L L/XL
conforms to: EN140
product code: pdM40Hd
fiLters for 3M HaLf face Masks
particulate filters
Description
JBS Code
2125
P2R
DRS80HD
2128
P2R (Nuisance level organic vapour and acid gas)
DRS81HD
2135
P3R
PRS05HD
2138
P3R (Nuisance level organic vapour and acid gas)
DRS04HD
6035
P3R (Encapsulation in plastic case)
DRS03HD
6038
P3R HF (Hydrogen Fluoride and nuisance level organic vapour and acid gas
encapsulated in a plastic case
Gas and Vapour filters - class 1
6051
A1
PRS40HD
6054
K1
PDM74HD
6057
ABE1
A181301043
6059
ABEK1
PRS18BHD
6075
Formaldehyde + A1
PRS65HD
6096
A1 HgP3R
PFI21HD
Gas and Vapour filters - class 2
6055
A2
DRS85HD
6099
ABEK2P3R (Full Face Masks only)
PRS39HD
6098
AXP3R (Full Face Mask and single shift use only)
PRS154HD
particulate pre-filters (use with a 501 Filter Retainer to combine with 3M Gas and Vapour Filters)
5911
P1R
DRS05HD
5925
P2R
PDM39HD
5935
P3R
PDM36HD
501
Filter Retainer (used to clamp particulate pre-filters on to gas and vapour
filters)
A181301036
603
Platform (used to connect 5000 Series filters to 3M reusable face masks). 501
DRS111HD
filter retainer also required.
filter retainers
3M 105 face seaL cLeaner
378
Suitable for cleaning 3M 4000, 6000 and 7500 series respirators. Supplied
in boxes of 40.
product code: drs51Hd
3M 106 respirator carry case
Suitable for storing 3M 4000, 6000 and 7500 series half mask respirators
when not in use.
product code: drs109Hd
respiratory protection
For use as gas/vapour only protection. If particulate protection is also
required select an appropriate 5000 series filter and use a 501 retainer
to clamp together. Sold per pair.
conforms to: EN141
product code: pdM34Hd
3M 2135 particuLate fiLters
Select these filters for particulate protection only. Sold per pair.
conforms to: EN143
product code: prs05Hd
3M 2125 p2 particuLate fiLters
Select these filters for particulate protection only. Sold per 20.
conforms to: EN143
product code: drs80Hd
respiratory protection
3M 6057 aBe1 orGanic Vapour
inorGanic and acid Gas fiLters cLass 1
3M 2128 p2 particuLate nuisance
LeVeL orGanic Vapour & acid Gas fiLters
Select these filters for particulate protection only. Sold per 20.
conforms to: EN143
product code: drs81Hd
3M 5911 p1s particuLate fiLter
cartridGes
3M 2138 p3 (nuisance LeVeL orGanic
Vapour and acid Gas) particuLate fiLters For use when respirator is used for a combination of particulate and
Select these filters for particulate protection only. Sold per pair.
conforms to: EN143
product code: drs04Hd
gas/vapour protection. When used in this way, 3M 501 retainer
covers are also required. Sold in singles.
conforms to: EN143
product code: drs05Hd
3M 5925 p2 particuLate fiLter
cartridGes
3M 5935 p3 particuLate fiLter
cartridGes
For use when respirator is used for a combination of particulate and
gas/vapour protection. When used in this way, 3M 501 retainer covers
are also required. Sold per pair.
conforms to: EN143
product code: pdM39Hd
For use when respirator is used for a combination of particulate and
gas/vapour protection. When used in this way, 3M 501 retainer covers
are also required. Sold per pair.
conforms to: EN143
product code: pdM36Hd
379
respiratory protection
respiratory protection
3M 501 fiLter retainer
Filter Retainer required when using a 3M 5000 series particulate filter in
isolation. A 3M 603 platform is also required. When using a 3M 6000 or
7500 series mask and 5000 series filter in combination only the 501.
Retainer is required. Supplied in packs of 2.
product code: pdM35Hd
3M 6054 k1 Gas fiLter
K1 Ammonia filter which connects directly onto the 3M 6000/7500
series half mask respirators. Supplied in packs of 2.
conforms to: EN141
product code: pdM74Hd
380
3M 6051 a1 orGanic Vapour fiLters cLass 1
For use as gas/vapour only protection. If particulate protection is also
required select an appropriate 5000 series filter and use a 501 retainer to
clamp together. Sold per pair.
conforms to: EN141
product code: prs40Hd
3M 6055 a2 orGanic Vapour fiLters cLass 2
A2 Organic vapours filter which connects directly onto the 3M 6000/7500
series half mask respirators. Supplied in packs of 8.
conforms to: EN141
product code: drs79Hd
3M™ 6059 Gas and
Vapour fiLters
3M™ 6075 Gas and
Vapour fiLters
3M™ 6099 Gas & Vapour
particuLate fiLters
The 3M™ 6059 ABEK1 Filters protect against
organic vapours, inorganic vapours, acid gases
and ammonia and its derivatives. Supplied in
packs of 2.
conforms to: EN14387
product code: prs18Hd
The 3M™ 6075 A1 + Formaldehyde Filters
protect against organic vapours and
formaldehyde. Supplied in packs of 2.
conforms to: EN14387
product code: prs65Hd
The 3M™ 6099 ABEK2P3R Filters protect against
organic vapours, inorganic and acid gases,
ammonia derivatives and particulates. Supplied
in packs of 2.
conforms to: EN14387
product code: prs39Hd
respiratory protection
respiratory protection
MoLdex HaLf Mask series 7000
Protection against gas, vapour and dust. Mask body made of
soft, TPE material which is gentle on the skin. Easy maintenance
and cleaning without tools. With EasyLock® filter system: easy
handling. No additional adapters or parts necessary. Drop down
option: mask can be worn around the neck during breaks. Metal
free, CE Marked. Ideal for Robust fit test programs. 7002
complete with ABEK1 P3 R filters (9430).
conforms to:
EN140:1998
product codes:
prs185Hd
MoLdex fuLL face Mask series 9000
Extremely lightweight, the mask body is made from hypoallergenic material
which is gentle on the skin. Low profile design for excellent field of vision. Easy
accessible components for cleaning and maintenance. With EasyLock® filter
system. Lightweight with Excellent Periphery Vision due to the Panoramic lens.
Easy to clean and maintain. Class 2. Metal free, CE Marked. Ideal for Robust fit
test programs. 9002 full face mask complete with ABEK1 P3 R filters (9430).
conforms to: EN136:1998
product codes: prs186Hd
MoLdex easyLock® fiLters
Suitable for Series 7000 and 9000 Masks. Bayonet connector. Particulate
filters can either be connected with the gas cartridges or directly with
the mask body. Adaptors and particular pre-filters are not necessary.
Simpler Logistics - 30% less parts. Particualte filters with pleated Filter
Technology: significantly reduces breathing resistance, improves wearer
comfort & reduces fatigue.
conforms to: Particulate filters tested and certified to
EN143:2000+A1:2006.
Gas filters and pre-assembled filters tested and
certified to EN14387:2004+A1:2008
MoLdex accessories for tHe 7000 &
9000 series
7972-01 5 units per box
9973-01 1 unit per box
Head harness for 7000 Series
Diaphragm kit 4 exhalation & 16 inhalation
valves
9974-01 20 units per box Gaskets for EasyLock® connectors (Art 9001,
9002 & 9003)
9992-01 5 units per box Head harness for 9000 Series
9993-01 15 units per box Faceshield protector for 9000 Series
9998-01 1 unit per box Spectacle kit for 9000 Series
9977-01 1 unit per box Portacount Cartridge for 7000 + 9000 Series
9994-01 1 unit per box Canvas bag for 4000, 5000, 8000, 7000 + 9000
Series
8093-01 1 unit per box Resealable plastic container for 4000, 5000,
8000+7000 Series
381
respiratory protection
respiratory protection
MoLdex 8172 HaLf Mask tWin fiLter
respirator a1 p2 r d
8172 reusable half mask respirator provides high performance protection with
low maintenance. Purpose designed for enhanced wearer comfort and
improved field of vision, it is also lightweight, easy to fit. 8172 mask is
extremely versatile, and can be used for gas / vapour protection, gas /
vapour plus particulate protection, or just particulate protection
dependant upon which combination of adaptors and cartridges are used.
Suitable for use with the Moldex Radial Connector Filters. Replaceable gas
filter cartridges with built in inhalation valves provide gas and vapour
protection. Replaceable particulate filter discs provide dust, mist and
fume protection.
conforms to:
product code:
radiaL connector fiLters
suitable for series 8000
New inhalation valve with every cartridge particulate filters with pleated
Filter Technology: significantly reduces breathing resistance, improves
wearer comfort & reduces fatigue Particulate filters tested and certified
to EN 143:2000+A1:2006 Gas filters and pre-assembled filters tested and
certified to EN14387:2004+A1:2008
range of particle filters, Gas filters and adapters available
8070 particulate filter
A spare replacement filter for the 8000 series reusable masks. P2
protection. All dust, mists and fumes based on
water and oil. Examples working with glass
fibres and plastics, metal working and
welding particulate. Reusable - the
filter can be used longer than one
shift and fulfil the 120 mg loading
test with solids and liquid aerosols.
Protection level: P2-R D
product code:
Brs04Hd - (Pair)
8100 Gas filter
A spare replacement A1 filter for the
8000 series reusable masks. Examples
- working with solvents created by
mixing paints and adhesives. Organic
gases and vapours, boiling point >65C.
Protection level: A1
product code:
Bfi06Hd - (Pair)
382
accessories for 8000 series
8095 Filter Holder – attaches particulate filter directly onto the mask
product code:
Bfi02Hd
8090 Filter holder – Connects
particulate protection onto gas
filter
product code:
Bfi03Hd
8091 Service kit
product code:
Bfi11Hd
EN140:1998,
EN14387:2004
and EN143:2000
Brs13Hd
MoLdex fit test
reGuLations
The Approved Code of Practices supporting
COSHH, CAR and CLAW stipulate that tightfitting RPE MUST be fit tested as part of the
selection process.
There are two main reasons for
doing Bitrex testing. Firstly to
make sure that the respirator
itself is suited for the
wearers particular face
shape. Secondly to
make sure that the
respirator is fitted
correctly to get a
tight seal and ensure safety against hazards in the workplace.
fit testinG kit
Each kit is suitable for carrying out multiple tests and come packaged
in its own sturdy case, all kits come with a FREE Fit Test CD, to help
employers understand more about Fit Testing, the requirements and
how to carry out tests.
Moldex Fit Test Kits allow employers to take
charge of their own Fit Testing Programme
thereby reducing costs and enabling them
to carry out Fit Testing whenever necessary
(new employee, change of RPE etc).
each do it yourself fit testing kit contains:
1x Hood, 1x Bitrex Sensitivity Solution,
1x Bitrex Test Solution, 2 x Nebulisers,
1x Fit test
instruction CD
Modern, ergonomic design
Suitable for shower decontamination
respiratory protection
3M™ Jupiter™ poWered air turBo unit
The Jupiter™ Powered Air Respirator is comfortable, easy-to-use and provides
protection against particulates, gases or vapours, or against a combination of these
contaminants depending on the type of filters used.
High comfort decontamination belt
Electronic audible and visual alarm in case of low battery and/or low air flow
“Intrinsically Safe” (IS) kit available for use in potentially explosive atmospheres
Approved to EN12941 class TH2 or TH3 dependent on headtop
Assigned Protection Factor (APF)
APF 40 with 3M Versaflo S-Series & M-400 Headtops
APF of 20 with all others
Available either as a starter kit or in individual components.
product codes:
drs59Hd - Jupitor Unit
drs126Hd - Turbo unit - Ready to use
drs58Hd - Belt Clip
3M Jupiter Battery packs
Range of 8 hour and 4 hour rechargeable batteries for the Jupiter Powered Air
Respirator.
product codes
drs112Hd - 4 Hour
drs21Hd - 8 Hour
3M Jupiter inteLLiGent Battery cHarGer
product code:
drs22Hd
BreatHinG Hoses
Replacement hoses to link 3M QRS Headtops to 3MJupiter Turbo, Dustmaster and
Flowstream units.
product codes:
drs57Hd - BRT-23
prs87Hd - 008-0042P3 (Pack of 3)
3M Jupiter fiLters & Leads
product codes:
drs23Hd
drs113Hd
drs39Hd
drs31Hd
drs25Hd
drs27Hd
drs37Hd
- Jupiter Filters A2P3 (pair)
- Jupiter Filters A2 BEK1 P3
- Jupiter Filters K1 P3 (pair)
- Jupiter Filters ABEl P3 (pair)
- 3M Jupiter Pre Filters (12 pairs)
- Jupiter Adapter Lead
- QRS Breath Tube Cover (singles)
383
respiratory protection
respiratory protection
3M s-200 suppLied air systeM for 3M Bayonet
facepieces
The most comfortable and versatile Supplied-Air system for facepieces. For use with any of
the 3M™ range of bayonet facepieces: 6000 & 7000 full & half-masks. Adjustable airflow
control at the waist (140->300) over a range of input pressure (3-7 bar).
Can be used as a standard airline respirator, or in dual-mode with filter
back-up when air supply is disconnected *. The breathing-tube is backmounted, eliminating interference in your work. Connections to the beltmounted regulator are all ergonomically designed. An optional spray
gun hose can be fitted to the S-200.
Can be used with the 3M™ Aircare™ range of compressed-air filter units.
Can be used left or right-handed (interchangeable connections). * In
dual-mode, filters must be fitted which are effective against the
contaminants present Overflow valves (C-340) must be fitted if filters are
not.
product code:
prs142Hd
prs143Hd - Air Supply Tube
3M Visionair 500HV Visor spray
respirator
Comfortable supplied air respirator providing a wide field of vision.
An air flow indicator is mounted in the visor, and both visor and
spray gun share the same air supply via a small, belt mounted
regulator with built in pre filter. Sets new comfort standards for an
HVLP spray gun compatible air fed respirator. Acetate visor for paint
spraying. Wide field of vision. Comfortable and lightweight. Variable
air regulator / filter. Low air flow warning device. CE marked. Kit
contains Visor headtop and breathing tube, Waistbelt regulator
assembly and spray gun hose. Excludes coupling and compressed
Air Supply tube.
product codes: pVi11Hd - Acetate Visor (Pack of 5)
prs22Hd - Face Seal (Pack of 12)
384
respiratory protection
respiratory protection
3M VersafLo poWered air respirator tr-315
The 3M Versaflo respirator is ideal for use in a variety of situations where filtered air is necessary for safety. The product is made to the
highest specifications and has been approved according to global standards when it comes to respiratory protective devices. It can be
used in various settings from pharmaceutical or woodworking industries to demolition or mechanical industries – and anywhere else that may
require the use of a superior air respiration kit which protects, purifies and enables safe breathing.
Unlike non-powered respirators, an air powered respirator reduces pressure put on the face as well as reducing breathing resistance and heat buildup – which greatly increases comfort when worn for long periods of time. It can easily be worn all day by a user without causing any discomfort. The
three main goals 3M had in mind when creating the 3M Versaflo system was to simplify the equipment selection process for buyers, increase the
versatility of the entire system and ultimately, improve the overall user comfort.
the 3M Versaflo starter kit contains:
• a TR-302E turbo unit
• a particle filter
• a pre-filter
• a standard belt
• one high capacity battery for prolonged use
• a battery charger for added convenience
• a breathing tube which has an adjustable length
• an air flow indicator which has been EN12941 approved
product codes:
prs168Hd - Versaflow Starter Unit complete
accessories:
prs176Hd - Versaflow Battery High Capcity
prs170Hd - Filter Main
prs169Hd - Pre-Filter
3M™ VersafLo™ M-306 Headtop
The M-306 Features a comfortable faceseal in polyurethane coated
polyamide for construction, chemical applications and heavy industry.
Lightweight, compact and well-balanced. Integrated protection from a
range of respiratory, head, eye, face and hearing hazards. Coated lenses
provide added chemical and scratch resistance. Spare parts and
accessories are quick and easy to replace.
conforms to: EN12941 TH2/TH3, EN 14594 2B/3B, LD 440 V a.c.
product codes: drs114Hd
385
respiratory protection
respiratory protection
3M™ VersafLo™ M106
facesHieLd
3M™ Versaflo™ M-100 Series Visors offer respiratory, eye
and face (EN166 Medium Impact) protection. Optional
Hearing Protection is also available. M-106 features a
general purpose faceseal for dusts, spraying and chemical
processing. Face seals are interchangeable. When used in
conjunction with 3M™ Powered and Supplied Air Systems
the M-100 Visors offer an assigned protection factor (APF*)
of: Jupiter APF= 20; TR-300 APF = 20; V-500 APF= 20
*Assigned Protection Factor (APF) as detailed in HSE HSG53.
product code: prs129Hd
3M™ VersafLo™ M306
facesHieLd
The 3M Versaflo M-Series head tops and face shields are
lightweight and well-balanced to provide an integrated
system of protection from a range of respiratory, head and
eye hazards (EN166 Medium Impact). Fully-adjustable head
suspension. A deflector allows users to direct the airflow
inside the head top for increased control and comfort.
Large visor for excellent peripheral and downward vision
with good optical clarity. Lenses provide chemical and
scratch resistance. When used in conjunction with 3M™
Powered and Supplied Air Systems they offer an assigned
protection factor (APF*) of: Jupiter APF= 20; TR-300 APF =
20; V-500 APF= 20 *Assigned Protection Factor (APF) as
detailed in HSE HSG53.
product code: drs131Hd
386
respiratory protection
conforms to:
respiratory protection
3M™ speedGLas™ 9000 WeLdinG sHieLd
The Speedglas™ 9000 welding shield series also features four aerodynamic
exhaust vents to remove exhaled air without letting in welding fumes. For welders
who keep their shield in the down position for prolonged periods of time, the buildup of carbon dioxide (CO2) behind the shield is greatly reduced compared to
traditional shield designs. Users feel more energetic and clear-headed all day
long. The 9000’s breathability allowed the shield to be designed for a closeto-the face-fit, for optimum vision and reduced neck strain. And the shield’s
narrow width makes it ideal for welding in tight spots. Classification: 1/2/2.
Two dark state levels (9 or 11), Fail / Safe state: shade 5, Light state: shade 3.
Switching time, light-dark: 0,4 ms, Switching time, dark-light: 100-200 ms.
Viewing area: 42 x 93 mm. Battery life time: 1500 hours.
EN379
product codes: dfi08Hd
dfi01Hd
dfi02Hd
dfi09Hd
dfi10Hd
dfi11Hd
dfi12Hd
dfi13Hd
dfi14Hd
dfi16Hd
dfi17Hd
dfi18Hd
- Helmet
- 9002V Filter Shade 9 - 13
- Lens Cover - Outside Protection
Plate (Pack of 10)
- Turbo Blower Unit
- Single Station Intel Charger
- 8 Hour Battery
- P2 Filters (Pack of 12)
- Breathing Tube
- Flex View Polycarbonate Plate
- Inside Protection Plate (Pack of 5)
- Lens Batteries (Pair)
- Mag 2 Lens (Pack of 5)
3M™ speedGLas 9100 fx air WeLdinG
sHieLd
Improved Respiratory Protection – TH3. For constant TH3-rated
respiratory protection and excellent vision in a flip-up model, meet the
new 3M Speedglas 9100 FX Air Welding Shield. It readily connects
both powered and supplied air respirator systems. Big, curved clear
protective visor for increased peripheral vision. Superior optical
performance. High-comfort headband. SideWindows Shade 5.
conforms to: EN175:B and EN166:BT.
product codes: dfi19Hd
387
respiratory protection
respiratory protection
oLyMpus® MaxiMask tWin fiLter
siLicone Mask
The premium Half Mask,offering maximum protection and comfort. A specially designed
extra wide sealing surface offers unparalled comfort and fit. Fully adjustable four point
cradle suspension. Twin Maximasks is available with or without speech diaphram. Twin
Maximasks has balanced angle mounted filters for better weight distribution and
minimal visual impairment.
product code: pdM18Hd
Sold without filters
Jsp poWercap® actiVe™
PowerCap® Active™ is a lightweight, firm fitting, ergonomically designed
positive pressure respirator, designed to protect the user from dust and
most airborne particulate pollutants to EN12949+A2 TH1P. PowerCap®
Active™ excels in very dusty environments within light industry
(machining and milling), agriculture (livestock, poultry farming, grain
silos), landscaping, and food processing, with the faceshield offering
added protection against flying particles. PowerCap® Active™ is a unique
alternative to disposable masks, giving improved comfort, safety and
efficiency to the wearer.
conforms to: EN12949+A2 TH1P
product code: pHt02Hd
force8™ HaLf Mask WitH typHoon™ VaLVe
WitHout tWin cartridGes
The Force8™ twin cartridge half mask with Typhoon™ valve offers superior low breathing
resistance and a 4-point suspension harness with quick release buckles. The mask is made
with a durable thermoplastic rubber offering a superior fit to most face shapes. The mask
accepts the full range of low profile Force8™ filters giving the Force8™ the flexibility to be
used for many applications, providing filtering protection against particulates, many gases
and vapours.
product code: prs02Hd
oLyMpus® MidiMask tWin
fiLter ruBBer Mask
pre-fiLter pads
(pk10)
Reshaped economical twin filter
mask combines with JSP unifit
twin filter cartridges. Wide
elastic complete with new
head cradle ensures
comfortable fit.
product code:
pdM22Hd
Spares to keep PowerCap® Active™
providing optimal levels of protection.
product code: pfi29Hd
peeL off Visor
(pk10)
Spares to keep PowerCap® Active™
providing optimal levels of protection.
product code: prs38Hd
388
Sold without filters.
respiratory protection
oLyMpus a2 orGanic
Vapour canister
Spares to keep PowerCap® Active™ providing
optimal levels of protection.
A full range of quality multi-fit DIN thread Filter
Canisters giving protection against either
gases, particulates or a combination of the two.
Colour coded to European norms in EN14387 &
EN143.
product code: prs117Hd
product code: pfi28Hd
fiLterspec™
unifit aBek1
coMBination Vapour
cartridGe
The gas, vapour and dust filters are designed to
fit the JSP range of Midimasks. The full gas and
particulate filter range is colour coded to
European norms in EN14387 and EN143.
product code: prs08Hd
respiratory protection
BLack Mkii tH1p fiLters
(pair)
tHe neW fiLterspec is a unique coMBination of
safety spectacLes & disposaBLe respirator
The unique FilterSpecTM effortlessly combines both eye &
respiratory protection.
The one-piece lens offers optimal coverage and has Anti-Mist
and Anti-Scratch coating as standard.
FMP2 filtration giving 94% efficiency (see application chart
below).
spectacLe
 Stylish spectacle element design.
 Fully adjustable spectacle frame for maximum comfort and
security.
 6.5 base, one-piece lens offers optimal coverage.
 Anti-Mist Coating on Lens as standard.
 Anti-Scratch Coating on Lens as standard.
 Wide range of lens coatings will be made available.
 Wide range of colour combinations will be made available.
conforms to: Spectacle = EN166.1.F
fiLter Mask
fuLLy adJustaBLe spectacle frame for maximum comfort and security.
 Disposable filter mask element for optimum protection.
 Re-usable filter holder element for an economic PPE
solution.
 Lightweight for user comfort. (Under 60g)
LiGHtWeiGHt re-usable filter holder element for an economic PPE solution.
fiLter Mask - Exhale valve is fitted to reduce heat & CO2 buildup for greater
comfort.
 Exhale valve fitted for increased filter element longevity.
 Each product comes supplied with 3 filter elements.
 Removable, replaceable elastic strapping.
conforms to: Mask = EN1827:1999 FMP2
product codes:
psp125Hd - Spectacle/Mask Combo FMP2
psp126Hd - Goggle/Mask Combo FMP2V
psp127Hd - Spectacle/Mask Combo FMP20V
appLication
Guide
389
respiratory protection
respiratory protection
scott profiLe tWin-fiLter HaLf Mask
The fitting solution to your respiratory needs, Scott’s Profile² is an
advanced twin filter half mask that combines comfort, protection and low
through life costs with exceptionally low breathing resistance.
Perfectly balanced, user friendly and modern in design, Profile² accepts the
comprehensive range of highly efficient Scott Pro² gas, particulate and
combined filters to provide respiratory protection in a wide variety of
applications.
key features
• Large diameter valves create low breathing resistance and reduce
wearer fatigue
• Odourless, lightweight TPE Facepiece is incredibly soft and
comfortable to wear for long periods
• Comfortable head harness and neck buckle provide even weight
distribution and full support for the mask
• Easy to fit and adjust, the mask’s intuitive donning process promotes
high wearer acceptance
• Latex and silicone-free to ensure no allergic skin reaction or irritation
• Choice of three sizes with wide faceseal for optimum and efficient fit
• Low profile and swept back filters provide balance, an unobstructed
field of vision and allow compatability with other PPE
• Easy-fit bayonet filter mechanism enables fast, secure first time
connection
• Spark, splash and contaminant guards for filters and exhale valve
conforms to: CE 0121.EN140:1998/EN14387:2004/EN143:2000
product codes: prs78Hd
prs139Hd
pfi15Hd
prs137Hd
prs07Hd
- Mask only
- Mask and P3 Filters
- ABEK1P3 Filters
- A1B1E1K1-P3 Filters
- CF32 A2B2E2K2 P3 Filter
scott proMask facepiece
Scott Health & Safety's Promask is a multi-function full face mask,
providing unrivalled comfort and protection against a wide variety of
respiratory hazards. It is lightweight and ergonomically designed for use in
a wide variety of industrial applications. Scott's Promask is available in
halo-butyl and silicone, with a choice of two sizes.
key features:
• Unique, contoured 'T' sealing edge for a comfortable and efficient fit
• Available in two sizes
• Wide visor and side filter fit to give an unobstructed field of vision
• Easy to don and doff
• Hard-coated PC visor option for solvent resistance
conforms to: EN136 & EN 12942 TM3
product codes: prs131Hd - Face Mask
prs132Hd - A2B2P3 Filters
prs07Hd - CF32 A2B2E2K2 P3 Filter
390
respiratory protection
product codes: prs133Hd - Headtop
prs85Hd - Auto welding filter
variable shade 9-13
respiratory protection
t4 Headtop
Designed for welding, T4 accommodates a range of welding lenses. It
utilises a specially designed air distribution system to direct airflow to the
user whilst minimising the discomfort of wind in the eyes. The unique design
concept of T4 offers operational flexibility and high levels of comfort,
ensuring maximum wearer acceptance. Designed for welding with a
selection of electronic and passive lenses available. Specially designed
airflow system to minimise discomfort from wind in the eyes. Suitable for
both Powered & Airline use.
t2as Headtop
A lightweight full hood, T2 covers both the head and shoulders and is
designed for applications where impact protection is not required. A
lightweight soft full hood covering the head and shoulders. Drawstring neck
seal enables one size to fit all heads. No fit issues for wearers with spectacles
or beards. Optional antistatic version for use in Pharmaceutical and other
industries. High protection level suitable for both Powered & Airline
operation.
conforms to:
EN12941 TH3, EN1835 LDH3
product code: prs150Hd - Antistatic Hood
sari fuLL facepiece
Scott Safety's Sari full face mask is renowned for its high standards of safety,
reliability and comfort. Sari is approved for use with Pro2000 filters, with
Autoflow and Proflow PAPR powered units and with constant flow
compressed airline. Wide sealing edge for comfort and excellent fit.
Comfortable to wear even for long periods. Adjustable five-point rubber
head harness. Large distortion-free visor. Speech diaphragm affords clear
communication. Sari full face mask is fully tested and approved to EN 136
class 3 and carries a CE mark. CE0121.
conforms to:
EN136 Class 3
product code: prs102Hd - Respirator
pfi14Hd
- CF22 K2-P3 R Filters
pfi23Hd
- CF22 A2-P3 R Filters
391
respiratory protection
tornado t-poWer poWered air
purifyinG respirator
ERGONOMIC DESIGN –
waist mounted lightweight, compact
and unobtrusive turbo unit
INTRINSIC SAFETY (I.S.) –
anti-static polypropylene
construction, suitable for use in
potentially explosive gas and dust
atmospheres
MODULAR FLEXIBILITY –
simple to configure for changes in
application using Tor/Adapt filter
holders
COMPREHENSIVE FILTRATION – extensive range of filters for the
widest range of applications
ELECTRONIC FLOW CONTROL – maintains correct airflow as the
working environment changes
INTELLIGENCE –
provides clear audible and visual
warnings of filter clogging and low
battery charge
AUTO HEADTOP DETECTION – instantly recognises headtop type,
monitors and optimises airflow
accordingly
CHOICE OF BATTERY –
weight and duration options
SINGLE OR MULTI-STATION
SMART CHARGERS –
maintain optimum battery
performance
RELIABLE –
low through life costs
conforms to:
EN12941 and EN12942
product codes:
prs134Hd - Tornado Ready Pack with T2
Headtop
prs151Hd - Tornado Harness
prs136Hd - Filter Adapters
prs145Hd - P3 Filters PF252/2
pfi19Hd
- PF251/2 Filter
pfi33Hd
- TF230 TH2/TH3/TM3 A1B1E1 PSL
Filter
prs135Hd - ABEKP3 TF233 Filters
392
prs149Hd - Flowtester
prs34Hd
- Battery - 8 hour
prs76Hd
- Battery Charger
respiratory protection
Renowned as the world’s leading Constant flow escape
set, the ELSA (Emergency Life Support Apparatus) from
Scott Health & Safety is designed for rapid escape from
hazardous industrial and marine environments. Now in its
third generation, Emergency Life Support Breathing
Apparatus is a concept originally pioneered by Scott
Health & Safety under its Sabre Breathing Apparatus
brand and the original design principles continue to this
day. The current design is simple and quick to operate,
reliable and robust in use and conforms to the latest
European Standard EN1146.
respiratory protection
eLsa: eMerGency Life support
apparatus
eLsa features
• 10 or 15 minute versions
• Standard Hi Vis or black anti-static bag
• Automatic quick fire activation
• Unique cubic hood design
• CE marked in accordance with EN1146
• Shipswheel approved
• Corrosion resistant Nickel plated components
• Standard breathing air charging adaptor
• 10 year service interval
tHe eLsa Hood
The uniquely designed hood is fabricated from PVC
coated materials with an ozone resistant neckseal. The
three sided flat visor allows the hood to be flat packed
avoiding creases to the visor and allowing rapid removal
from the bag. The large visor area provides excellent
peripherial vision with the hood offering a feeling of
unrestricted comfort. An inner mask prevents misting and
minimizes Carbon Dioxide dead space.
product code: prs182Hd
- 10 minute
393
respiratory protection
respiratory protection
uLtiMate protection for
your Workforce
purefLo systeM
The adjustable neck cape when sealed creates the self-contained positive
pressure environment, providing additional protection to the lower face
and neck area.
An odour/vapour filter is also available for applications involving noxious
fumes.
 Sophisticated Electronic systems management (ESM) continually
monitors all functions and provides pre-use battery life check.
 Unique head mounted display (HMD) incorporates LED/audio signals to
warn the wearer when battery is low or filter needs replacement.
 Dedicated high efficiency P3 particulate filter has three times more
filtration area than normal, lasting longer and reducing ownership costs
- no pre-filter needed.
 New lightweight compact shaped helmet is more comfortable to wear
than previous models.
 Choice of hard-hat or bump cap versions with fixed or flip-up faceshields.
 Non-incendive versions also available for use within intrinsically safe
environments in compliance with EN 50021.
 Face-shield is manufactured from high impact-resistant polycarbonate
with anti-mist, anti-scratch coating.
 Face-shield seals securely against the helmet frame for optimum
protection against impact or splashes and when lifted prevents entry of
any external contaminants from outer surface.
 Unique 4-point adjustable cradle and fail-safe ratchet control system
enables the helmet to be quickly and easily adjusted for different head
sizes and shapes, achieving optimum comfort, balance and fit
 Power is delivered by two environmentally safe, rechargeable nickel
hydride batteries that slot easily into position to deliver over 8 hours of
continuous use.
 Batteries can be charged in-situ in approximately 2.5 hours using a
lightweight multi-pin smart charger.
 Innovative design and construction with fewer, easy-to-fit replacement
parts, reducing through life costs simplifying maintenance.
Manufactured and CE approved in full compliance with the latest
European standards.
product codes:
pHH104Hd - Bump Cap (EN812)
pfi12Hd
- Filters P3 (pack of 10)
pVi43Hd
- Spare Visor (pack of 4)
pVi44Hd
- Neck Cape (pack of 4)
pHH134Hd - Pureflo System PF23ESM-P
pHH147Hd - Battery PR01030SP
pfi20Hd
- Filters P3 PR01220
pHH196Hd - Clear Visor for PF23ESM
pfi26Hd
- Filters PR01500SP
pHH160Hd - Headband Upgrade Kit
394
FALL ARREST
395
FALL ARREST
FALL ARREST
EUROPEAN STANDARDS FOR FALL
ARREST EQUIPMENT
All Fall arrest equipment includes different products adapted to
the run risks and to the necessary protection. These products
(full body harness, fall arrester on anchorage line, work
positioning systems, energy absorbers, self retractable fall
arrester and accessories) are governed by the European
standards on Personal Protective Equipment (PPE).
Standards applicable to all products :
.
EN 363 : Fall arrest equipment
.
EN 364 : Test methods
.
EN 365 : General requirements for directions for use and
marking
Other standards :
.
EN 353-1 : Mobile fall arrester on rigid anchorage line
.
EN 353-2 : Mobile fall arrester on flexible anchorage line
.
EN 354 : Lanyards
.
EN 355 : Energy absorbers
.
EN 358 : Work positioning system
.
EN 360 : Self-retractable fall arrester
.
EN 361 : Full body harness
.
EN 362 : Connector
.
EN 795 : Anchorage devices
EN363 STANDARD: FALL ARREST
EQUIPMENT
Set of personal protective equipment against falls from a
height, linked to one another and intended to stop a fall. Fall
arrest equipment must contain at least a full body harness and
fall arrest equipment.
EN364 STANDARD: TEST METHOD
Describes the different test methods of the various PPE against
walls from a height, as well as the test equipment.
EN365 STANDARD: GENERAL
REQUIREMENTS FOR THE
INSTRUCTIONS FOR USE AND THE
MARKING
Description of the marking which must figure on the PPE
against falls from a height, and of the information which must
appear on the instructions for use.
EN353-1 STANDARD: MOBILE FALL
ARRESTER ON RIGID ANCHORAGE
LINE
Equipment consisting of a mobile fall arrester with self locking,
integral with its rigid anchorage line (rail, cable...). An energy
dissipating element can be built-in to the equipment.
EN353-2 STANDARD: MOBILE FALL
ARRESTER ON FLEXIBLE ANCHORAGE
LINE
396
Equipment consisting of a mobile fall arrester with self locking,
integral with its flexible anchorage line (rope, cable). An energy
dissipating element can be built-in to the equipment.
FALL ARREST
EN795 STANDARD: ANCHORAGE DEVICES
Element to which personal protective equipment can be fastened.
 A1 class : no PPE
Consists of anchorage points designed to be fixed on vertical,
horizontal and surfaces walls, columns, lintels.
 A2 class : no PPE
Consists of anchorage points designed to be fixed on leaning roofs.
 B class : PPE
Consists of mobile temporary anchorage devices.
 C class : no PPE
Consists of anchorage devices fitted with horizontal flexible
anchorage lines "life line", admitted sloping : 15 degrees.
 D class : no PPE
Consists of anchorage devices fitted with horizontal rigid anchorage
rails.
 E class : PPE
Consists of dead weight anchors to be used on horizontal surfaces,
admitted sloping : 5 degrees (not used in France).
EN355 STANDARD: ENERGY ABSORBERS
Component of a fall arrest equipment, which guarantees the stop of a fall
from a height in safety by reducing the impact of the shock.
EN358 STANDARD: WORK POSITIONING
SYSTEM
A work positioning system consists of components (work positioning belt
and lanyard) linked to one form of complete equipment.
EN360 STANDARD: SELF RETRACTABLE FALL
ARRESTER
FALL ARREST
EN354 STANDARD: LANYARDS
Connection elements or equipment component. A lanyard can be in rope
made of synthetic fibres, in metallic rope, in strap or in chain. Maximum
length : 2m. Caution: A lanyard without energy dissipating element must
not be used as fall arrest equipment.
Fall arrester with self locking device and a self-retractable system for the
lanyard. An energy dissipating element can be built-in to the equipment.
EN361 STANDARD: FULL BODY HARNESS
Body gripping device intended to stop falls. The full body harness can be
made of straps, buckles and other elements; set and adjusted in a right
way on the body of an individual to hold him back during a fall and
afterwards.
CHOOSING YOUR HARNESS
Harnesses for multiple uses, harnesses for suspended work, with
positioning belts - you can choose your equipment to suit the work you
will be doing. The dorsal anchorage D ring is the best point of
attachment to use for all prevention. The anchorage points on the front
of the body are used as fall arrest measures during access (ascent using a
glider on a rope, or with a system fixed to a cable or a rail) or during work
on such features as inclined roofs. Less often, the anchorage points on
the front of the body may be used for rescue, or when work is carried out
in confined spaces.
Work on ropes is undertaken using the D ring or the specially designed
suspension rings located in the abdominal read. If the work to be carried
out requires the use of a positioning lanyard, you should choose a
harness that includes a positioning belt as well as the anchorage points
that are vital for fall arrest.
 D ring for fall arrest anchorage
 Rings or fall arrest D
anchorages (to be used in
combination)
 Suspension ‘D’s’ or rings
 Positioning D ring (to be used
in combination)
397
Front
Front
Front
Back
FALL ARREST
FALL ARREST
398
CALCULATING YOUR FALL DISTANCE
A, B, C, D and E
of Fall Arrest
Anchorage
Body Harness
Connector
Deceleration device
Evacuation / Rescue
A simple way of remembering
the core components of a fall
arrest system is the “ABC” of Fall
Arrest. Quite simply, without
one part, the system does not
work.
FALL ARREST
Photos are for illustration purposes only and are not to scale
FALL ARREST
FLEXI HARNESS KIT 2 POINT AA011/2P
Includes: PRO AB113 fall arrest harness - Conforms to: EN361. AE5220SAF
Protecta expending shock absorbing single leg fall arrest lanyard - 2m.
AK053 Protecta Red and Grey Back Pack.
Conforms to: EN361 & EN355
Sizes:
S - XL
Product Code: PHA14FA
TITAN FALL
PROTECTION KIT
8
This leading kit contains a 1point Duraflex elasticated
harness with TEFLON finish.
Lanyard with shock absorber
and scaffold hook 50mm,
(soft loop attachment to
harness) length 2m or 1.75m
for scaffolders.
Product Code:
PKT02FA
SATELITTE KIT
Product Code
PBA15MS
PHA79FA
PHA55FA
PHA56FA
PHA57FA
PHA60FA
AJ514
PHA59FA
PHA58FA
PLN01FA
PHA51FA
PKT06MS
Quantity
1
1
1
1
1
2
3
1
1
2
1
1
Description
Canvas Bag
Harness AB11313
1mtr Ratchet Strap
2mtr Ratchet Strap
4mtr Ratchet Strap
15mtr Rope
Twistlock Karabiners
Large Hook
Extension Strap
1.2 Girder Loop
Rope Grab
8mm Eye Bolt
399
FALL ARREST
FALL ARREST
400
PRO AB11313 FALL
ARREST HARNESS
FLEXA ELASTIC HARNESS
AB128336
FLEXA ELASTICATED
SAFETY HARNESS - AB12533
With a design based on the PRO AB101 harness,
and including all of its functions, the PRO AB113
also has a sternal anchorage point that allows
the use of vertical access systems and work on
inclined roofs. 1 dorsal attachment D ring. 1
sternal attachment D ring. Adjustable thigh and
shoulder straps. Dorsal piece with shock
absorbing effect. Fall indicator. Weight: 1.175
kg.
Conforms to: EN361
Sizes:
M - XL
Product Code: PHA79FA
FLEXA full body harness, automatic buckles,
front and rear fall protection points. Comes with
belt. Designed for the most demanding of
users, the new FLEXA range of harnesses
combines safety, comfort and productivity.
Elastic shoulder straps as well as articulation
rings provide the user with greater freedom of
movement.
Conforms to: EN361 and EN358
Sizes:
S - XL
Product Code: PHA71FA
Full body harness, automatic buckles, front and
rear fall protection points. Elastic shoulder straps
as well as articulation rings provide the user
with greater freedom of movement. Materials :
Buckles : White zinc-plated steel. Red and grey
straps : Polyester (Resistance : 26kN). Elastic strap
: Polyamide and rubber (Resistance : 22kN).
Thread : Polyester (>0.6N/Tex). Padding : EVA
foam covered with Polyamide + Urethane. Dorsal
Plate : Polyethylene.
Conforms to: CE EN361 and EN358
Sizes:
S - XL
Product Code: PHA50FA
FALL ARREST
FALL ARREST
PRO - HARNESS
Full body harness PRO101®FLEXA AB101E harness, 1 fall arrest dorsal D
ring, adjustable shoulder and thigh straps, adjustable chest strap
webbing, elastic polyamide - width 45 mm, stitching: high-strength
polyamide thread, breaking strength > 22 kN fitting, high-strength
zinc-plated steel, attachment D rings in zinc-plated wrought steel,
energy absorbing dorsal plate, quick adjustment buckles system
breaking strength >15 kN, net weight : 0,95 kg.
Conforms to: CE EN361
Sizes:
S - XL
Product Code: AB101
PRO - HARNESS "SCAFF"
Harness PRO 101/19 AB101/19 harness, 1 fall arrest dorsal D ring,
adjustable shoulder and thigh straps, adjustable chest strap webbing
polyester - width 45 mm, stitching: high-strength polyamide thread,
breaking strength > 27 kN, fitting high-strength zinc-plated steel,
attachment D rings in zinc-plated forged steel, energy absorbing dorsal
plate, quick adjustment buckles lanyard, energy absorber: tear strap,
trigger level force 2 kN, impact force reduction < 6 kN hooks strength >
25 kN, opening 17 mm, high strength forged steel, white electro-zingplated system breaking strength > 15 kN, net weight: 1.8 kg.
Conforms to: CE EN361
Sizes:
S - XL
Product Code: AB101/19
401
FALL ARREST
FALL ARREST
402
MILLER MA02 HARNESS
MILLER MA04 HARNESS
MILLER MA08 HARNESS
1-point fall arrest full body harness for use with
lanyard or fall arrester. Features: Duraflex
harnesses conform to the shape of the worker,
stretching with every movement. With
unsurpassed comfort, Duraflex harnesses offer
wide end-user acceptance. The high-tech
protective finish on the webbing repels water,
oil, grease and dirt and helps to extend the
service life of the harness. Benefit : Made from
patented elasticated webbing, the DuraFlex
harness offers greater comfort, improved safety
and increased productivity and durability. All
Miller harnesses are CE certified and comply
with EN361 and, where necessary, with EN358.
Conforms to: EN361
Sizes:
S - XL
Product Code: PHA20FA
2-point - Fall arrest full body harness, rear & front
anchorage for use with lanyard or fall arrester.
Features: Duraflex® harnesses conform to the
shape of the worker, stretching with every
movement. With unsurpassed comfort, Duraflex
harnesses offer wide end-user acceptance. The
high-tech protective finish on the webbing
repels water, oil, grease and dirt and helps to
extend the service life of the harness. Benefits :
Made from patented elasticated webbing, the
DuraFlex® harness offers greater comfort,
improved safety and increased productivity and
durability. All Miller harnesses are CE certified
and comply with EN361 and, where necessary,
with EN358.
Conforms to: EN361
Sizes:
S - XL
Product Code: PHA21FA
Features : Duraflex harnesses conform to the
shape of the worker, stretching with every
movement. With unsurpassed comfort, Duraflex
harnesses offer wide end-user acceptance. The
high-tech protective finish on the webbing
repels water, oil, grease and dirt and helps to
extend the service life of the harness. Benefits :
Made from patented elasticated webbing, the
DuraFlex harness offers greater comfort,
improved safety and increased productivity and
durability. All Miller harnesses are CE certified
and comply with EN361 and, where necessary,
with EN358.
Conforms to: EN361
Sizes:
S - XL
Product Code: PHA23FA
FALL ARREST
FALL ARREST
MILLER REVOLUTION R7 OFFS
Designed for highly corrosive offshore and coastal environments
including wind energy and petrochemical industries. 2 POINT +
workpositioning. Front and rear anchorage (front webbing loops) and
workpositioning side D-rings. BENEFITS: High corrosion resistance and
reinforced harness. Protection with PVC coating on back and sides D
rings. Fall indicator at dorsal D pad. Stand up D function for easy
connection. Stitched A security marking for anchorage at back and chest
points. Foldable side D-ring. Additional elastic keepers on shoulder strap.
Longer stitching on the belt pad for greater strength. Custom
identification labels on back housing. Back Pad with V shape. Self
contained label pack. FEATURES: High resistant components. 316 L
Stainless steel PivotLink™. DualTech™ polyamide/polyester webbing.
ErgoArmor™ padded back shield. Positioning belt. Automatic buckles on
legs straps, belt & chest strap in anodized aluminium. Shoulder
aluminium CAM buckle adjustment for easy fit. Back tool rings.
Conforms to: CE, ANSI/OSHA, CSA, AS/NZS
Sizes:
S/M, L/XL, 2XL
Product Code: PHA102FA
MILLER REVOLUTION R7 WIND
Ideal for work at height on onshore wind energy applications. 2 POINT +
workpositioning. Front and rear anchorage (front webbing loops) and
workpositioning side D-rings. BENEFITS: High safety and comfort level.
Fall indicator at dorsal D pad. Stand up D function for easy connection.
Stitched A security marking for anchorage at back and chest points.
Longer stitching on the belt pad for greater strength. Back pad with ‘V’
shape. Additional elastic keepers on shoulder strap. Custom
identification labels on back housing. Self contained label pack
Conforms to: CE, ANSI/OSHA, CSA, AS/NZS
Sizes:
S/M, L/XL, 2XL
Product Code: PHA103FA
403
FALL ARREST
FALL ARREST
404
SALA DELTA™ II - 1 POINT
FALL ARREST HARNESS
SALA DELTA™ II - 2 POINT
FALL ARREST HARNESS
SALA DELTA™ II ARC FLASH
HARNESS
Delta No-Tangle design for added comfort and
easy donning. Quick Connect Buckles. Stand-up
dorsal D-ring. Side work positioning attachment
points. Comfortable padded work positioning
belt. Adjustable chest strap with easy to use pass
through buckle. Parachute buckles on lower
shoulder straps for quick and easy adjustment.
Pass through buckle, non-slip leg straps for fast
& easy donning. Polyester webbing construction
for added durability. Coated hardware for
corrosion resistance.
Conforms to: CE EN361 and EN358.
Sizes:
S - XL
Product Code: PHA84FA
Delta No-Tangle design for added comfort and
easy donning. Stand-up dorsal D-ring. Quick
Release Buckles. Front fall arrest point (CE
system only). Side work positioning attachment
points. Comfortable padded work positioning
belt. Adjustable chest strap with easy to use
pass-thru buckle. Parachute buckles on lower
shoulder straps for quick and easy adjustment.
Pass-thru buckle, non-slip leg straps for fast &
easy donning. Polyester webbing construction
for added durability. Coated hardware for
corrosion resistance.
Conforms to: CE EN361 and EN358.
Sizes:
S - XL
Product Code: PHA85FA
Delta™ II Arc Flash Harness designed to meet the
specific needs of the utility industry. Leather
insulators behind the hardware for reduced
conductivity. Back web loop replaces back D-ring
reducing weight and electrical conductivity,
front web loops for rescue. Delta No-Tangle™
design for added comfort and easy donning.
One-handed quick connect buckles make
putting on, adjusting and removing the harness
a snap and provide a memory fit – adjust the
harness once and it stays that way. Torso buckles
adjust easily, yet hold the straps firmly in place
and complete the 5-point adjustment system.
7,000 lb. nylon webbing construction for added
security and durability. Plated hardware for
corrosion resistance. Arc Flash resistant up to 40
cal/cm2, ASTM F887-04 compliant. Meets or
exceeds all applicable industry standards
including OSHA, ANSI Z359 and ASTM F887-04.
Conforms to: OSHA, ANSI Z359 and ASTM
F887-04
Sizes:
S - XL
Product Code: PHA110FA
FALL ARREST
Two-point elasticated high-visibility
vest harness with rear and front
anchorage. Features: 2-pt harness with
front and rear anchorage (from
webbing loops) and quick buckles.
Lightweight, durable polyester vest
jacket with front zipper, multiple
pockets, extra shoulder padding and
lateral loops. Multiple adjustments for
perfect fit. Pressure studs between
lining and jacket allow ready access for
harness inspection. Both harness and
the vest offer excellent chemical and
abrasion resistance.
Conforms to: EN361 & EN471 Class 2
Sizes:
S - XL
Product Code: PHA92FA
AUTOBLOC STRAP
FALL ARRESTER
Webbing polyamide width 48 mm,
strength> 15 kN sewed. Shock
absorbing element, absorbing strap,
polyamide webbing width 45 mm,
engaging peak force 2 kN, impact force
reduction < 6 kN. Casing
composite material, anti corrosion anti impact. Hooks strength AlB
>25kN, opening A: 17 mm I B: 18 mm,
AlB high strength steel, A : electrozinc-plated I B: nickel-plated. System
breaking strength>15 kN Net weight:
1.54Kg.
Conforms to: CE 0086 EN360
Product Code: AD104
SELF RETRACTING
FALL ARREST DEVICE AD515
Self retracting fall arrest device, with Ø 5
mm cable and integrated retrieval
tripod. Internal shock absorbing
element, integrated braking system,
impact reduction < 6kN. Galvanised
steel housing, polyurethane (PU) paint.
Automatic snap hook, with fall
indicator, 17 mm opening. Adaptor for
AM100 tripod: ref. AT0515. Useful
length: 15 m. System breaking strength
> 12 kN.
Conforms to: EN360 - EN1496 B
Product Code: AD515
KIT BAG
FOR FALL
ARREST AK053
Main pocket zip
fastener. Front pocket
zip fastener. Padded
shoulder straps. Grab
handle. Material: Nylon.
Stitching: polyester.
Colour: Black, grey and
red. Net weight: 410g.
Dimensions:
Length: 150mm
Width: 300mm
Height: 400mm
Product Code:
PKT04FA
FALL ARREST
MILLER HI-VIS VEST
HARNESS
SELF RETRACTING
FALL ARRESTER AD212
12 m Galvanised Steel, galvanised steel
cable dia 4 mm, length 12 m. Internal
absorbing element, integrated brake
system, impact force reduction < 6 kN.
Casing, black PP, anti-corrosive shockproof upper connector, karabiner
AJ501, opening: 17 mm, steel - electro
zinc plated. Lower connector,
karabiner AJ565, opening: 19 mm,
steel - nickel plated. System braking
strength> 12 kN. Horizontal use
allowed. Maximum fall 2 m. Net
weight: 4.5 kg.
Conforms to: CE EN 360
Product Code: AD212
AT0515 FIXING PLATE
FOR AD515
Material: Steel (thickness 8 mm), Zinc &
bichromate plated. Net weight: 2.1 kg.
Use: AD515 fall arrester fixing on AM100
tripod.
Product Code:
AT0515
405
FALL ARREST
FALL ARREST
REBEL FALL ARREST BLOCK
The Rebel is the highest performance fall arrester
on the market: ultra compact, extremely light, as
solid as a rock and with the best weight to length
ratio around. Compatible with any harness on
the market, the Rebel is available in three
models. So small, and yet it possesses all the
attributes of its more cumbersome relatives! The
design of this new self-retractable lifeline has
been carried out with the utmost care and
attention to detail, and has been especially
created for industry and construction workers
(maintenance work, work on scaffolding, pylons,
in lifts etc...). Looking for a product that is both
easy to handle and high-performance, these
professionals will certainly be won over by the
Rebel's reduced size and "feather" weight,
allowing it to be carried around with the worker.
On site, it provides an extremely high level of
security, with its blocking mechanism designed
to lock up at the slightest notion of danger. All
this while avoiding any untimely locking during
normal use, something that reduces impact force
and stopping distance in case of fall. The Rebel
also includes a fall indicator which allows the
user to check at a glance the integrity of the
product as well as being able to ensure that the
product is not re-used if it has already been
subjected to a fall.
Conforms to: EN360
Product Code: AD111
REBEL 6M WEB SELF
RETRACTING LIFELINE
A very light in weight Safety Block. This
product is engineered for reliable and
customer friendly protection, locks when it
should and won’t lock when it should not.
Lightweight device at 1.6kg. As standard,
there is also a top swivel designed to keep
the webbing from twisting during work
activity. The 6m Web SRL design is housed
in very tough thermoplastic which protects
from sensitive structures such as painted
surfaces, tiled roofs, aeronautic wings.
Quick activating and anti-ratcheting twin
disc brake system. Easy check of pawl good
operation. Easy inspection - Impact
indicator included.
Product Code: PLL02FA
TURBOLITE WEBBING 2M
Built-in web load indicator identifies when the
unit needs removed from services. Quick
activating Patent Pending Braking System.
Compact and lightweight provides 2m working
capacity lifeline. Engineered webbing for greater
abrasion resistance and long service life (vectran
/ polyester webbing). Lightweight, highstrength, impact-resistant nylon housing for
maximum durability. Built-in swivel prevents
lifeline from twisting. No annual factory
recertification required. Rated for up to a 136 kg
user Rated for up to a 100kg user (use in down
level). Housing: high impact nylon. Hub: shockabsorbing engineered co-polymer. Webbing:
Vectran core (25.4mm x 1.5mm). Connectors:
Karabiners: Twistlock karabiner (opening: 18mm)
raw material: stainless steel. Scaff Hook (opening:
65mm) raw material: aluminium.
Conforms to: EN360
Product Code: PHA30FA - Scaffold Hook
PHA35FA - 2 Twistlock
Karabiner
406
REBEL FALL ARRESTOR
BLOCK 10M
Retractable technology reduces fall
clearance and trip hazards for complete
safety. Stainless steel or galvanised cable
options available. Rugged thermoplastic
housing can withstand rough use. Self
locking swivel snap hook with impact
indicator.
Conforms to: CE EN360:1993.
Product Code: PBL01FA
SELF R
OR
SINGLE LEG ANCH
CONNECTOR
A
COMPATIBLE WITH
OT
SHOULDER OR FO
CONNECTION
AGE
back of
Attaches directly to
no separate
most harnesses—
karabiner required
ing dorsal
Installs to web, leav
r equipment
D-ring open for othe
or rescue
g fit to
Design provides snu
inates
worker’s back—elim
”
nuisance “flopping
allowing a
Improve safety by
level connection
shoulder and foot
y
acit
cap
kg
for 141
ACT
EXTREMELY COMP
T
AND LIGHT WEIGH
ORAGE
SWIVELING ANCH
LOOP
R L is the
At just 725g, this S
pact unit on the
lightest, most com
5% lighter &
s—1
clas
its
market in
30% smaller
for
Limits lifeline twisting
n
smoother operatio
PACITY
141KG WEIGHT CA
operator &
Higher capacity for
USING
HO
IMPACT-RESISTANT
tools
sing provides
High-strength hou
maximum durability
WIDE VARIETY OF
CONFIGURATIONS
AUTOMATIC QUICK
TOR
ACTIVATING ARRES
jobsite
Provides complete
ty
versatility & flexibili
within
S tops falling worker
distances
inches—reduces fall
g forces
stin
arre
rage
ave
and
to 6kN or less
Replaces lanyard and
improves safety
(thickness
Advanced webbing
m)
1.5mm, width 20m
R
IMPACT INDICATO
orber
Integrated shock abs
a fall
visual indication of
provides
ELINE
RETRACTABLE LIF
S
MEETS OR EXCEED
INDUSTRY
STANDARDS
EN360 : 2002
ent and manage
Helps track equipm
grams
safety inspection pro
fall protection
Provides continuous
—keeps lifeline
without restrictions
, reducing
out of worker’s way
g & trip falls
dragging, snaggin
1630KG GATE
accidental
Reduces chances of
-out) for
disengagement (roll
ty
safe
added
Y
T
E
F
A
S
E
T
E
L
P
M
O
C
A
SOLUTION IN THHEAND
PALM OF YOUR
FALL ARREST
NANETORA-CLTINOGKLIF™
ELINE
K™?
WHY USE A NANO-LO
FALL DISTANCES
MAINTAIN SAFE
ORKER SAFETY
FOR IMPROVED W
COMPACT
for ease-of-use
omically designed
Nano-Lok™ is ergon
most harnesses.
ect connection to
,
and is ideal for dir
eable on your back
tic
no
it’s virtually un
rd
ya
lan
a
as
And at only 725g,
ed
us
y and can be easily
stays out of the wa
t.
replacemen
VERSATILE
gle or twin leg
cation requires sin
Whether your appli
ead anchor or for
unting to an overh
configurations, mo
are more than 10
re
the
ss,
to a harne
connection directly
y application.
an
t
os
from to suit alm
models to choose
SAFE
a fall within
quickly—stopping
Nano-Lok™ locks
low heights.
at
n
tio
tec
more pro
inches—providing
lifeline, which
the
on
n is always kept
In addition, tensio
falls.
, snagging and trip
reduces dragging
provements.
Im
ety
saf
y
ke
are
Both features
2FA
N1
Product Code: PL
407
FALL ARREST
FALL ARREST
ULTRA-LOK® RSQ SELFRETRACTING LIFELINE WITH
RESCUE
Exclusive design provides both fall arrest with
assisted rescue capabilities and automatic self
rescue for ultimate versatility. Fall arrest mode
stops falls within few decimetres and limits the
forces to 6kN or less for added safety. Self rescue
mode automatically lowers the user to the next
level after a fall. Lightweight and long lasting
durable reinforced plastic housing. Incorporates
a built-in carrying handle for easy transportation.
15m cable extends and retracts automatically
enabling the user to move around the work area
protected. i-Safe™ Intelligent Safety System is
built into every unit to track inspections, control
inventory and manage information.
Conforms to: CE EN360 and EN34.
Product Code: PHA89FA (3504554: 15m
length, stainless steel cable)
408
FALCON SELF-RETRACTING
MILLER MINILITE FALL
LIFELINES
LIMITER - MI11
Enhanced safety: The quick-activating braking
mechanism stops a fall within centimetres. Fall
indicator. Greater comfort of use: Lightweight.
Housing: high-impact resistant nylon
Hub: Heat-treated aluminium
Cable: Ø4.5mm galvanised steel
Connectors:
Karabiner: raw material: zinc plated steel,
opening: 17mm breaking strength: >2500daN
Conforms to: EN362.
Snap hook: raw material: zinc plated steel,
opening: 19mm
breaking strength: >2000daN
Conforms to: EN362
Working Capacity (m): 6,2m.
Breaking Strength: >1200daN.
Weight (kg): 4.1kg.
Conforms to: EN360
Product Codes: DBL05FA - 6m
DBL06FA - 10m
DBL07FA - 15m
Self-retracting web lanyard with a quickactivating braking system that limits free falls. In
contrast to shock-absorbing lanyards, a Fall
Limiter eliminates the need for extended fall
distance clearance, minimizing the risk of injuries
and making rescue easier. The lightweight, palmsized self-retracting fall arrest block with a quick
activating braking system that limits freefall to
centimetres. The 3 meter retractable webbing
allows greater freedom of movement. The highimpact composite housing and corrosion
resistant interior increase the product durability.
Complete MINILITE 3.3m with 1 swivel snap hook
50mm and 1 snap hook 22mm.
Product Code: DBL03FA
FALL ARREST
FALL ARREST
MILLER TURBOLITE PERSONAL FALL
LIMITERS
First affordable alternative to shock-absorbing lanyards. Extremely compact
and lightweight (1.9 lbs. [.86 kg]) provides 6-ft. (1.8 m) working capacity
lifeline; unit attaches directly to the harness back D-ring for greater mobility
and versatility. Engineered webbing for greater abrasion resistance and long
service life. High-strength, impact-resistant nylon housing for maximum
durability. Built-in swivel prevents lifeline from twisting. Rated for up to a
400 lb. (181.4 kg) user. No annual factory recertification required. Meets
global standards for international companies; meets all applicable OSHA,
ANSI A10.32 and Z359-2007, and CSA standards.
Product Code: PHA35FA
MIMAS20 MINIBLOC
WEBBING SELF
RETRACTABLE FALL
ARREST BLOCK
Froment Minibloc Fall Arrester selfretractable fall arrester equipment with
cable, provided with an inertial braking
mechanism, a built-in energy reducer
and a protective casing. Wrench
webbing 46mm wide. Strap length: 2.5
meter.
Conforms to: EN360
Product Code: PHA32FA
SCORPION™ EDGE BLOCK
Inexpensive alternative for Single energy absorbing lanyard. 2.7m – edge
tested retractable webbing lifeline. BENEFITS: Extremely robust and
lightweight. Reduces the impact forces due to a fall to under 6kN.
Reduces the risk of tripping or snagging. Eliminates the need for an
extended fall distance clearance. housing and internal components are
corrosion resistant. No annual factory re-certification required* – lowers
cost of ownership and increases productivity. FEATURES: Resistant to fall
over an edge. Extremely robust and lightweight. Quick-activating braking
mechanism limits a free fall to centimetres. Visual fall indicator – indicates
the unit must be removed from service. Corrosion-resistant internal parts.
high impact polymer cover. Stainless steel/aluminium components.
Swivel at the top of unit to prevent lifeline from twisting during use./
Weight: 1.750kg.
Product Codes:
1016840 Scorpion edge tested CS20 + snap hook + webbing resistant
to breakage against edges. Anchorage Connector: Steel
screwgate karabiner. Harness Connector: Steel snap hook.
1016841 Scorpion edge tested CS20 + karabiner opening 65mm +
webbing resistant to breakage against edges. Anchorage
Connector: Scaffold hook (opening 63mm). Harness
Connector: Aluminium screwgate karabiner.
1016742 Scorpion edge tested CS20 + karabiner opening 55mm +
webbing resistant to breakage against edges. Anchorage
Connector: Steel scaffold hook (opening 55mm). Harness
Connector: Steel snap hook.
409
FALL ARREST
FALL ARREST
WEBBING FALL
ARREST LANYARD
AE529
Rip stitch energy absorber with safety
strap. 45mm sewn polyamide webbing
lanyard. Connector: 2 x AJ501, 17mm
opening. Useful length: 2.00m. System
breaking strength >15 kN.
Conforms to: CE EN355
Product Code: AE529/6
TRIGGER POSITIONING HALYARD AF777
The adjustment system developed for the Trigger means that the length of the
lanyard can be adjusted with a unique level of control and comfort. By simply
pressing the control ‘trigger’,the lanyard extension can be precisely adjusted.
Reducing the length of the lanyard is just as easy, as you simply have to pull on
the rope. Positioning lanyard in nylon kernmantel rope, with a yellow and red
wear indicator. Connector: 1 x AJ501, 17 mm opening. 1 x AJ565, 18 mm
opening. Useful length: 2.0 m. System breaking strength >15 kN.
Conforms to: CE EN358
Product Code: DLA14FA
410
BRAIDED ROPE - AE532/1
Braided rope 10.5mm diameter, twin leg lanyard, length 1.8m with AJ501
steel screw gate karabiner 17mm opening and 2x AJ595 steel scaffold
hook 50mm opening.
Product Code:
AE532/1
ADJUSTABLE WORK POSITIONING ROPE
ADJUSTING LANYARD 2M AL422
CONNECTING LANYARD WITH THIMBLE
ENDS - AL420C
Braided rope: polyamide 6 white colour, 10.5 mm diameter, identification
thread, yellow and red wear indicator. Reducer: zinc plated forged steel.
System breaking strength : >1500 daN.
Conforms to: EN358
Product Code: PLN53FA
Protecta rope connecting lanyards are an ideal solution for the connecting
element in a restraint system. Although they can be used with a positioning
belt, a fall arrest harness is generally preferred, as it is more comfortable
and versatile. Connecting lanyard made from nylon kernmantel rope.
Safety stitching underneath protective sleeve. Thimble eyes. System
breaking strength >22 kN.
Conforms to: EN354
Product Code: PLN55FA - AL420C 2m
PLN46FA - AL410C 1 m12
FALL ARREST
FALL ARREST
SALA TALON TWIN LEG RETRACTABLE
WEBBING LANYARD
FALL ARREST WEBBING LANYARD AE5220WAE
Fall arrest lanyards in 25 mm webbing are extremely supple and pleasant to
use. They have a high resistance to abrasion and an incredible life span. Rip
stitch energy absorber with safety strap. 25 mm polyester webbing lanyard.
Connector: 1 x AJ501, 17 mm opening, 1 x AJ565, 18 mm opening. Useful
length: 2.00 m. System breaking strength >15 kN.
Conforms to: EN355
Product Code: PLN09FA
Twin-Leg 100% Tie-Off Design Provides Continuous Fall Protection and
Added Mobility. Quick-connect handle and built-in strap secures SRL
directly to the harness and keeps unit in position. Two separate 1.8m
lifelines extend and retract as the worker moves, providing continuous
fall protection without restrictions. Impact indicator on each lifeline
makes inspections quick and easy.
Conforms to: EN360 CE
Product Code: PLN58FA
MD02 - RESTRAINT LANYARD POLYAMIDE
ROPE 12 MM - 1M
RESTRAINT LANYARD POLYAMIDE ROPE
12MM - 1M
Lightweight, versatile restraint and fall arrest lanyards designed for
maximum protection. Adapted rope for work requiring limited movement
and where there is a sufficient potential fall distance. This 1-meter rope
comes with a buckle and two karabiners.
Conforms to: EN696
Product Code: PLN56FA
Lightweight, versatile restraint and fall arrest lanyards designed for
maximum protection. Adapted rope for work requiring limited movement
and where there is a sufficient potential fall distance. This 1-metre rope
comes with a buckle and a karabiner.
Conforms to: EN696
Product Code: PHA86FA
MILLER WEBBING ANCHORAGE SLING 1.2M
Reliable. High breaking strength. Lightweight. Easy-to-use. Safe and easyto-install. Versatile. Adapts to a wide range of anchorage points. The
webbing anchorage sling allows a reliable connection point which adapts
to a wide range of anchorage points. Webbing: Yellow webbing Polyester
27mm> 3000 daN. Dimensions: Length 1.2m. Performance: Breaking
Strength > 1000 daN.
Product Code: DLA04FA
MILLER WEB STRAP ANCHOR 0.3M
Lightweight, versatile restraint and fall arrest lanyards designed for
maximum protection. Adapted rope for work requiring limited movement
and where there is a sufficient potential fall distance.This 0.3-meter extra
webbing comes with one karabiner. Weight: MD50: 0.213 kg. Breaking
Strength: > 22 KN. Webbing: Webbing Raw Material Polyester Yellow webbing
Width: 23mm. Webbing Breaking Strength > 3000 daN.
Conforms to: EN362
Product Code: PHA87FA
411
FALL PROTECTION IN EDGE SITUATIONS
Benefits: Mechanical properties resistant against cutting and shearing. Shock absorber reduces forces < 6kN. Reduces fall arrest forces. Stretchable:
reduced product length, avoids the risk of tripping or snagging. Increased security & guaranteed reliability. Innovative technology. Elasticity and
shearing resistance. Features: Patented core-yarn technology. Identifiable green tubular webbing with a black stripe. Wrapped filament combining
two types of thread: one shock absorbent and one abrasion resistant. Integrated shock absorber. Built-in warning flag.
Conforms to: EN355: 2002
412
EDGE-TESTED KERNMANTEL SHOCK
ABSORBING LANYARDS
EDGE-TESTED SHOCK ABSORBING MANYARD®
FALL ARREST
FALL ARREST
FALL ARREST
FALL ARREST
TITAN WEB SHOCK ABSORBING LANYARD A2
Webbing shock absorbing lanyard 1.5m with 2 screwgate karabiners and
loop. Weight: 0.950kg. Breaking Strength: > 15kN. Webbing Raw Material:
Polyester, 30mm. Connector Type: 2 Connectors. Connector Raw Material:
galvanised steel. Connector Opening: 18mm.
Conforms to: EN362
Product Code: PLN21FA
KERNMANTEL ANCHORAGE LINE
Nylon Static Rope. Length: 15m.
Conforms to: EN1891
Product Code: PHA60FA - AC415 - 15m
PLN08FA - AC405 - 5m
RING GIRDER LOOP STRAP AM450/80
Sewn loop in nylon webbing. Size - 25 mm. 4 safety seams. Useful length:
0.80 m. System breaking strength > 22 kN.
Conforms to:
EN795 class B
Product Code:
AM450/80
STEEL SELF LOCKING KARABINERS
1/4 turn self locking Karabiners. Material: galvanised steel. Opening: 18
mm. Weight: 170 g. Breaking strength > 25 kN.
Conforms to: EN362
Product Code: AJ514
1/4 TURN KARABINER, 50 MM - AJ593
PRO-KARABINER
AJ501 Karabiner screw locking, high strength steel, electro-zinc-plated
breaking strength : > 25 kN, net weight : 0.168 Kg.
Conforms to: CE 0086 EN362
Product Code: AJ501
A multifunctional karabiner with a large gate, the AJ593 can be used equally
well as an anchorage point for a fall arrest device, or at the end of a lanyard.
This Karabiner is equipped with a pin that allows you to permanently
connect a lanyard to the Karabiner, preventing it from becoming lost. 1/4
turn self locking Karabiner. Material: galvanised steel. Opening: 50 mm.
Weight: 666 g. Breaking strength > 25 kN. Comes with a pin.
Conforms to: EN362
Product Code: PHA91FA
413
FALL ARREST
FALL ARREST
DOUBLE SAFETY SELF LOCKING
KARABINERS - AJ592
ALUMINIUM 'SCAFFOLD HOOK'
CONNECTOR
Material: galvanised steel. Opening: 85 mm Weight: 835 g. Breaking
strength > 18 kN.
Conforms to:
EN362
Product Code: PHA59FA
Aluminium scaffold hook conector 60mm opening. 23kN.
Product Code:
PHA90FA
SELF LOCKING KARABINER - AJ565
Material: galvanised steel. Opening: 18 mm. Weight: 227 g. Breaking
strength > 23 kN.
Conforms to: EN362
Product Code: PHA40FA
SELF LOCKING SCAFFOLDING
KARABINER - AJ595
Double safety self locking karabiner. Material: galvanised steel. Opening:
50 mm. Weight: 510 g. Breaking strength > 23 kN.
Conforms to: EN362
Product Code: CARBINAL
SAFETY RESCUE HOOK - 1KV
414
If a victim of electrocution is slumped across a live electrical connection - do
not try to pull him away with your bare hands! Pull the victim clear with the
'Safety Hook'. Resistivity: 10/18 Ohm/cm. Breakdown voltage: 80kV/mm.
Leakage current resistance: level kA3c. Arc resistance: level L4. Density:
0.995 g/cm3. Resistance to stretch: 240kg/cm sq. Tensile
strength: 350kg/cm sq. Maximum bending stress: 315kg/cm sq.
Product Code: PHA70FA
VIPER ROPE GRAB - AC400
Mobile fall arrest device on kernmantel rope, Ø 10,5 mm, with automatic
blocking function. Body in bichromate steel. Screw gate locking karabiner.
17 mm opening. Weight: 0.600 kg.
Conforms to: EN353-2
Product Code: PHA61FA
FALL ARREST
FALL ARREST
MOBILE TRIPOD - ROLLGLISS
Mobile tripod anchorage system AM100 Telescopic adjustable feet,
automatic locking legs when opened, stabilizer pad on each foot 4 high
strength anchorage points, aluminium section design, cast head in highstrength. Aluminium 8 height setting points (1.35-2.35m), working
diameter : 1.54-2.56m, closed length : 1.69m. Usable load capacity 2
persons or 500kg, Breaking strength > 10 kN, net weight 14.5kg.
Conforms to: CE 0086 EN 795 CLASS B.
- Tripod
Product Code: AM100
PLN64FA - Carrying Bag
STEEL GUIDE PULLEY - AT052/1
Compatible with cable with maximum. Ø 5 mm. Weight: 0.920 kg.
Product Code: AT052/1
SALA GLYDER™2 SLIDING BEAM ANCHOR
EVOLUTION CABLE SHUTTLE
The Evolution™ horizontal lifeline system is a permanent low tension,
multi-span lifeline used for fall protection on elevated horizontal surfaces.
Optimum sliding along the cable, automatic passage of intermediate
brackets and/or curves. Working capacity on both sides of lifeline thanks to
180° rotation of the anchor ring. Connection and/or disconnection of the
shuttle at any point of lifeline. Compact shape to guarantee lightness and
strength. Ergonomics optimized for good grip. One hand operation.
Conforms to: EN795 class C
Product Code: PHA45FA
The Glyder™2 provides fall protection and complete horizontal mobility
while working on structural steel such as I-beams. The device can be
attached overhead or at your feet. Once installed, the Glyder™2 will
effortlessly follow the worker, in synthetic wear pads that eliminate metalto-metal contact, reducing friction, providing smooth operation. The
Glyder™2 is designed to work with any standard CE approved lanyard.
Unique guarded locking mechanism protects the anchor from accidental
disengagement. Replaceable synthetic wear pads eliminate metal-tometal contact reducing friction which provide smooth and effortless
operation. Extremely lightweight at only 1.66kg with a user capacity of
189kg. Fits I-beams from 8.75-35cm wide, up to 3.125 cm thick.
Conforms to: OSHA, ANSI Z359, ANSI A10.32,
EN795:1996 Class B.
Product Code: PGL01FA and DLA15FA
415
FALL ARREST
FALL ARREST
MILLER SAFESCAPE® ELITE CASE
Miller® SafEscape™ Controlled Descent/Self-Rescue System offers a
safe, timely solution for emergency height rescue. The SafEscape
descender is specially designed for smooth, automatic vertical and
angular controlled descent from overhead cranes, towers, aerial lifts,
oil derricks, platforms or other elevated work areas.
The complete system comprises of a SafEscape™rescue unit, 3/8" polyester
rope, rescue harness, cross-arm strap anchorage connector/carabiner,
retrieval yoke and convenient carrying bag, provides the user or rescuer with
all the necessary equipment required to perform self-evacuation or rescue.
Features:
• Automatic controlled descent design
• Approved for multiple descents during evacuation
• Easy to install and operate; minimum service and maintenance required
• Capacity: Two persons [330 lbs. each] descents up to 330 ft. (100m). One
person [330 lbs.] descents up to 1315 ft. (400m)
• Constructed of lightweight, high-strength cast aluminum
• Complies with OSHA 1926, Subpart M, Appendix C guidelines; meets all
applicable standards throughout the world
How it works:
Simply install the SafEscape unit to a secure anchorage using a
carabiner. Attach one end of the lifeline to the front rescue D-ring of the
full body harness. Drop the excess lifeline to intended landing zone. The
user's weight can then be transferred to the system and descend at a
controlled rate (not exceeding 4.5 ft./sec.) to a lower level. As the user is descending, the
opposite end of the rescue line is ascending and readying itself to perform yet another
rescue.
Conforms to: OSHA, ANSI/ASSE Z359.4, prEN341:2008/1A, EN1496:2007/B, CE0123,
ISO22159:07/1/A
Product Code: PHA36FA
PASSIVE FALL ARREST SYSTEMS
Falls are the single most common cause of deaths in UK & Ireland's
workplace. During 2004/2005 falls from height accounted for 53 fatalities
and around 3,800 major injuries such as broken bones and fractured
skulls. It's easy to see why the Health and Safety Executive has made
reducing these numbers a priority.
The HSE Work at Height Regulations 2005 provides guidelines as to what
employers need to do to comply. They have a duty to safeguard their
employees by undertaking risk assessment to ensure work at height is
properly planned, appropriately supervised and carried out in a safe
manner. This includes the provision of appropriate equipment to
minimise the distance and the consequences of a fall should one occur.
All of the top house builders use Passive Fall Arrest Systems, designed to
help them comply with the latest HSE regulations.
The Passive Fall Arrest or Landing System comprises a series of robust yet
lightweight bags filled with an energy absorbent material. In
circumstances where the risk of a fall cannot be eliminated, these bags
provide a more yielding surface, hence reducing the possibility of serious
injuries.
Manufactured using 75% recycled materials, the bags are available in
various sizes, providing a flexible solution whatever the customer's needs.
The bags are quickly and easily installed using a simple clip method,
providing a closely interlocked surface to completely fill the available
space. They can be installed by on-site labour after minimal training by
site management, requiring no complicated installation equipment and
no electrical power.
WHERE TO USE A PASSIVE LANDING SYSTEM AND
CORRECT INSTALLATION
The Landing System was originally designed to protect carpenters and
bricklayers working inside a building construction, where the bags will be
enclosed by walls or partitions. The bags can be installed at ground floor
level as soon as the first lift scaffold is installed, ensuring protection
against falls. On first or subsequent floors, protecting workers bricklaying
or installing trusses. Outside the house building industry too there is
significant interest in this range of products which have proved
adaptable enough to provide protection across a wide range of
applications where falls from height may occur.
The Landing System is installed by site staff trained and certified by the
JBS or their appointed agents. The installation is then checked and
approved by a designated person employed by the main contractor or
developer. Each bag must be visually inspected to ensure there is no
damage to the outer casing. The overall appearance of the bag should
also be assessed to check that the energy absorbent material has not
been crushed and any build-up of mortar or mud should be removed.
The clips must also be inspected for damage to ensure they are fully
operational.
Wherever the bags are to be used, the area should be cleared of all
rubbish and sharp objects and swept thoroughly to provide a clear
surface. The bags are very strong, but should not be walked upon unless
absolutely necessary. Continual walking on the bags will eventually
compress the energy-absorbing fill and reduce effectiveness.
Minimum orders and lead times apply, please contact your local JBS
branch for further details.
416
Product Codes:
SLS 8' x 2' x 2'
SLSB OUTER BAG ONLY 8 x 2 x 2
SLSS HALF BAGS
Download PDF

advertising